Scat error..

Dear All,
    I developed an scat, when i choose flat file and start executed, instead of taking the values from flat file, my recording only getting executed again and again, where could be the error...
Regards,
Suresh Patipati.

hi
please check whether you have assigned your file in the right path.

Similar Messages

  • SCAT Error - Record Transaction.

    Dear All,
    When I am creating the CATT scripts in ECC 6.0 under the type is C CATT, the system issues a Error message "Releases higher than 6.40 not permitted".
    Because I had worked with upto 4.7, the screen appearance is difference and I did not face any error like this. But I can create manual CATT test case and I do not know how to record the transaction.
    I request you to all please guide me in this regarding that how to record the transaction in manual CATT test cases?
    Thanks with regards,
    Ran

    Hi,
    Enter Transaction Code : SCAT
    STEP 1:
    Enter Test case Name and click create button
    and then Enter Short description and then first time TYPE u have to select MANUAL TEST CASE and select COMPONENT.
    then SAVE.
    STEP 2 :
    Open the TEST CASE in CHANGE MODE.
    now change the TYPE to CATT. and SAVE.
    STEP 3:
    Enter Transaction Code : SCEM
    Open the Test case and do the recording.
    pls go through this link
    http://help.sap.com/saphelp_47x200/helpdata/en/fd/f10538d6cb1e3be10000009b38f8cf/frameset.htm
    if it is useful reward some points

  • SCAT Transaction - Error in Application transaction S00347

    Hi
    Few User's are end up in getting an error message "Error in Application transaction S00347" after executing a specific Test case in SCAT Transaction. The test case gets list of product which needs an updation in a specific field in the product master in CRM. But after execution of this Test case in SCAT- along with the error message, it shows 'Field ZPROD_MADTER2_DYNP_SV-zz0010. is not an input field.' Hence it is not updating the desired field in the product master for the list of products.
    This happens only to few user and for others it is working fine.
    Please help.
    Regards
    Pravin Babu

    sorry.. it is by mistake I have written that.. the version is ECC 6.0. Thanks for correcting me.

  • Syntax error in CATT (SCAT)

    Hi All,
    I have a problem when i use SCAT script to define the import parameter
    Here the error message goes...
    Syntax error : &value (offset and length are not in the form +x(
    Please guide me how to fix this?
    Appreciate your response.
    Thanks in advance
    DP

    Hi,
    Thanx for the reply, but this ' ( '  is coming by itself in the Field name column in the Field list screen, that too in display mode, it is not allowed to change there. please suggest.
    Keyword                  Field name                    Len New field contents
                                 BDC_CURSOR                    000 &BDC_CURSOR
                                 BDC_OKCODE                    000 &BDC_OKCODE
    Material                 KOMG-MATNR(1)               018 10055
    Calculat.type         RV13A-KRECH(1)              001 Q
    Valid on                 RV13A-DATAB(1)             010 01.05.2010
    Valid to                 RV13A-DATBI(1)                010 30.04.2011
    AddValDays         KONP-VALTG(1)                002 0
    DP

  • Syntax error in SCAT (CATT script)

    Hi All,
    I have a problem when i use SCAT script to define the import parameter
    Here the error message goes...
    Syntax error : &value (offset and length are not in the form +x(
    Please guide me how to fix this?
    Appreciate your response.
    Thanks in advance
    Edited by: Dharmendra Pewa on Dec 24, 2010 1:32 PM
    Moderator Message: Duplicate Post.
    Edited by: kishan P on Dec 24, 2010 6:42 PM

    Hi,
    Thanx for the reply, but this ' ( '  is coming by itself in the Field name column in the Field list screen, that too in display mode, it is not allowed to change there. please suggest.
    Keyword                  Field name                    Len New field contents
                                 BDC_CURSOR                    000 &BDC_CURSOR
                                 BDC_OKCODE                    000 &BDC_OKCODE
    Material                 KOMG-MATNR(1)               018 10055
    Calculat.type         RV13A-KRECH(1)              001 Q
    Valid on                 RV13A-DATAB(1)             010 01.05.2010
    Valid to                 RV13A-DATBI(1)                010 30.04.2011
    AddValDays         KONP-VALTG(1)                002 0
    DP

  • Create asset using scat template

    Hai gurus,
    my finance user create LVA asset using scat template and the procument make the PO. When the user want to make good receipt it give an error. when i check using as03 the asset already have capitalized date on previous year. How this came? or this is a bug? how can the asset thatn just created and make the po not yet good receipt but have the capitalized date?
    Anyone have same experience?
    Regards,
    muzaidi

    Hi muzaidi,
    It sounds like the capitalization date is getting entered through the SCAT.  Try to identify if the capitalization date is a field being entered when running the SCAT.  Look for field name ANLA-AKTIV.
    In the meantime, use Tcode AS02 to try to remove the existing capitalization date.  If the item is not modifiable, use Tcode SPRO -> Financial Accounting -> Asset Accounting -> Master Data -> Screen Layout -> Define Screen Layout for Asset Master Data.  For the applicable screen layout rule make the capitalization date modifiable on both the main and sub asset number levels.
    Thanks,
    Chad

  • Role Creation using SCAT-Urgent.....

    Hi All,
    I got a spread sheet with roles and transactions to be included in each role.Can anyone let me know how to Map this transactions to roles using SCATT?Please explain in a procedure which would be helpfull to me.Points will be rewarded to the answers.
    Regards
    Krishna

    Hi Krishna,
    If yor are just asking about running a script, than follow the steps below:
    -Open the file, with excel and edit the data as per the requirement, and save the text file
    -To execute the test case using the external variant from file, from the initial CATT screen, enter the test case name and choose Execute.
    In the field Variants, select External from file and choose Choose. Select the file created above, and choose Open. Under Processing mode, select Errors, and choose Execute.
    Note: When you use this method, the file must be imported each time the test case is executed (file remains only on PC).
    If you are very new to CATT script, than use browse the link below:
    http://www.*********************/tutorials/scat.htm
    Hope it helps.
    Please award points if it is useful.
    Thanks & Regards,
    Santosh

  • Error during ecatt uploading

    Dear Expert,
    when i m running the test configuration in SECATT,
    i m getting the following error.
    "error when reading the file 'path' "
    i have chkd the file, i feel that file is ok as per my knowledge.
    what may b d solution ????
    can anybody suggest.
    thnx in adv.
    ashis

    Hello ashis,
    Keep the file in the nearest location like , desktop ..instead of some folders.
    And reduce the size of the upload file , if you  are using a pretty huge file.
    I had encountered the same problem some months back in SCAT...i tried the above it worked..so may be useful for you.
    regards
    Sandeep

  • Unable to use SCAT to upload material master in ECC 6

    HI
    I am unable to use SCAT to upload material master in ECC 6,
    an error is triggering
    "Releases higher than 6.40 are not permitted
    Message no. TT005
    Diagnosis
    With Web Application Server Release 6.40, you cannot create new automated CATT test cases. However, you can create manual CATT test cases"
    canany body please help me to use SCAT
    Sreeram

    you have to read yourself:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    I certainly do not use SCAT or SECATT to load master data, especially not material master.
    A material master has  dynamic screens, based on the material type the view selection will be different, based on entries made in MRP view fields become hidden or mandatory. Such things canot be done with a static recording.
    SAP provides batch input programs and BAPIs for material master load and additonally loading per IDOC in LSMW (which offers as well batch input and Bapi methods)

  • Is it possible to use SCAT 5.2 in Solaris 11?

    I tried to use install SCAT 5.2 in Solaris 11 and succeed installation.
    However when I try to open vmcore, it didn't work at all.
    I typed scat 5
    but the output message is :
    Unable to open corefile (dumpinfo failed)!
    == dumpinfo output ==
    == dumpinfo errors ==
    dumphdr_init: vmcore.5 unhandled dump version 10
    == dumpinfo end ==
    Of course, I added a path in profile and the core file is normally created in /var/crash :
    root@sol11x:/var/crash# ls
    bounds unix.4 unix.5 vmcore.4 vmcore.5

    I'm not a SCAT user (yet) but it looks like you need SCAT 5.3.
    Go here for more information:
    https://blogs.oracle.com/solariscat/entry/oracle_solaris_crash_analysis_tool
    Thanks, Cindy

  • ECATT ERROR LOG

    Hi,
    I am working with with ECATT error log, I want to make error log to appear more user friendly so that end user can understand it well.
    so what i want is to capture main error message from error log and want to display in some spread sheet.
    My first aim is to capture those messages.
    Can any one please help me........

    Hi
    SAP users use CATT frequently to upload master data or to make changes to master data records. SAP Consultants and Abapers tend to use it for creating test data. The transactions run without user interaction. You can check system messages and test database changes. All tests are logged. The CATT records your keystrokes while performing the actual transaction. You then identify the fields that you wish to change in that view. Then export this data to a spreadsheet to populate with the data required. This is uploaded and executed saving you keying in the data manually.
    To perform CATT, it has to be enabled in your production environment (your systems administrator should be able to do this - SCC4). You will also need access to your development system to create the CATT script.
    The process of uploading data with a CATT:
    Activate CATT in your client
    In transaction code SCC4 - click the change button
    Double click on the client number
    In the Restriction section, tick Allows CATT processes to be started.
    Upload data using CATT
    1. Create Import variant for the fields you need
    Transaction SCAT
    Goto Parameters
    Create Import Variant
    Goto Variant -> Edit
    Goto Variant -> Fast entry or F9
    Duplicate 01
    2. To change the MRP Group for a list of Material
    Assuming that I want to change the MRP Group for a list of Material.
    My text files should look something like this:
    [Variant ID] [Variant Text] &ZDISGR &ZMATNR
    --> Parameter texts MRP group Material
    --> Default Values M1 A001
    Changes to the default values displayed above not effective
    #01 M1 A001
    #02 '' A002
    #03 M1 A003
    Note : '' denotes a blank in the field. e.g. Material A002 MRP group will be replaced by a blank.
    3. Configure the recorded entry fields to read from the imported text file data
    In the CATT : Maintain functions test case Screen
    Double click on the Object Name
    Double click on the screen number with your desired fields
    Park the cursor on the fields
    Click Edit -> Details
    Fill in the Parameters Name and Field Contents
    Finish Save it.
    Assign your text file data.
    In the CATT : Execute test case Screen
    Click External from file and choose your text file
    CATT will now read from your text file and update whatever data you have specified.
    u can go through this link
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=catt&cat=sdn_all
    Check CATT help. http://****************/Tutorials/eCATT/eCATTMain.htm
    Reward points if useful
    Regards
    Anji

  • Catt Button not active in SCAT tcode on ECC6.0

    Hi Guru,
    I have installed an ECC6.0 system. When my developers are trying to create any test cases through scat tcode in the next screen the CATT button is not coming as active. We have a huge amout of master data to be uploaded.
    We have a Ecc6.0 system with the latest kernel.
    I have check the client setting and ecatt is allowed on the client.
    Can anyone tell me how to fix this error.?

    This issue has been resolved.
    We had opened a OSS message and sap came back replying that scat has been discontinued due to some critical bug from new  edition of SAP.
    We can now secatt or ecatt now.
    hope it helps.
    Regards,

  • Error in CATT Aplication

    Hi Folks,
    When running a CATT ( transaction SCAT ) in Production, I get the following error:
    Error  in application transaction ATT377
    Control data is obsolete, rerecord (VERBS-NAME: CreateObject CATT:  Callno: 000001)
    If I run the CATT in the Development Environment I don´t get the error.
    Any help will be appreciated ( and rewarded with pts!! )
    Thanks.

    Hi Andrey,
    well, normaly 90% ATT377 error does not have any effection to your CATT however, some of them are real problme.
    there are a lot of reasons can cause ATT377 error such as SAPGUI version, TCD interface. just one thing you need make sure to avoid this problem: you need excatly as same system enviroment as the CATT was recorded such as SP level and SAPGUI version..
    Please award me points if you are satisfied with my answer:)
    Thanks and Best regards,
    Cliff

  • SD Error?????

    Hi Sapians,
    We are unable to convert the req to a PO due to error SD 18024 on the MM side.  On the SD side the error message "No pricing listed because PO was not selected" occurs.  The SO is complete, Credit OK, Configuration green, qty confirmed. 
    Appreciate if you could please advice the right procedure to handle the issue.
    Thanks in advance.
    MM

    Hi Mohammed,
    We determine how the prices are calculated, taking into account sales area(sales org, distribution channel, division), document type and customer(generally sold-to-party).
    The main differences between pricing procedures would be the differences as we mentioned above, from the point of view of field entries. Coming to the output and the procedure, Suppose the condition types used will be different and hence the following whole procedure. One pricing procedure determination to the others, which data control these differences
    The main differences between pricing procedures would be the differences as I mentioned above, from the point of view of field entries.
    Coming to the output and the procedure, I suppose the condition types used will be different and hence the following whole procedure.
    As rajesh banka had explained..
    In SD, the steps to configure Pricing procedure are as under:
    Step 1:
    Condition table: If existing condition table meets the requirement, we need not create a new condition table. Considering the requirement for new condition table, the configuration will be done in spro as follows: IMG -> Basic Function -> Condition Table (select the required fields combination, which will store condition record).
    Step 2:
    Access Sequence: If existing access sequence meets the requirement, we need not create a new access sequence. Considering the requirement for new sequence, the configuration will be done in spro as follows: IMG -> Basic Function -> Access Sequence (Access sequence is made up of Accesses (Tables) & the order of priority in which it is to be accessed. Here we assign the condition table to access sequence.
    Step 3:
    Condition Type: If existing condition type meets the requirement, we need not create a new condition type. Considering the requirement for new condition type, the configuration will be done in spro as follows: IMG -> Basic Function -> Condition Type. It is always recommended to copy an existing similar condition type & make the neccessary changes. Here we assign Access sequence to Condition type.
    Step 4:
    a. Pricing Procedure: It is recommended to copy a similar pricing procedure & make the neccesary changes in new pricing procedure. Pricing Procedure is a set of condition type & arranged in the sequence in which it has to perform the calculation. Considering the requirement for new Pricing Procedure, the configuration will be done in spro as follows: IMG -> Basic Function -> Pricing Procedure --> Maintain Pricing Procedure.
    b. Pricing Procedure: After maintaining the pricing procedure the next step will be determination of pricing procedure. Configuration for determining pricing procedure in SPRO is as follows: IMG -> Basic Function -> Pricing Procedure --> Determine Pricing Procedure.
    Step 5: Condition record: Condition record is a master data, which is required to be maintained by Core team / person responsible from the client. During new implementation, the condition records can be uploaded using tools like SCAT, LSMW, etc.
    if you give me brief i can help you out more.
    if helpful REWARD points
    Thank you .
    Regards
    Ram

  • Panic[cpu11]/thread=2a100449cc0: pcisch-0: Fatal PCI bus error(s)

    I got this panic when i do some testing on SUN cluster. Anybody could give me some suggestions?
    Any comments are welcome.
    Environment information:
    SunOS arcsun48kh232ed1 5.10 Generic_118833-24 sun4u sparc SUNW,Sun-Fire
    Sun Microsystems sun4u Sun Fire 4800
    Solaris 10 (Sparc) ( patch latest 10_recommended_patch_cluster)
    scate version: 1.4.1
    sun cluster 3.1 u4 ( patch 120500-12)
    SUN volume manager( with Solaris 10)
    Crashed information:
    bash-3.00# Dec 5 20:18:03 arcsun48kh232ed1 ip: WARNING: The <if>:ip*_forwarding ndd variables are obsolete and may be remove                                d in a future release of Solaris.  Use ifconfig(1M) to manipulate the forwarding status of an interface.
    Dec 5 20:18:03 arcsun48kh232ed1 last message repeated 3 times
    Dec 5 20:19:32 arcsun48kh232ed1 DEV_STRESS: dev_stress_start: INFO: dev_stress successfully started
    Dec 5 20:19:33 arcsun48kh232ed1 DEV_STRESS: : INFO: dev_stress_monitor successfully started
    Notifying cluster that this node is panicking
    SUNW-MSG-ID: SUNOS-8000-0G, TYPE: Error, VER: 1, SEVERITY: Major
    EVENT-TIME: 0x457644ee.0x63a71d (0x1a01a2d86e0)
    PLATFORM: SUNW,Sun-Fire, CSN: -, HOSTNAME: arcsun48kh232ed1
    SOURCE: SunOS, REV: 5.10 Generic_118833-24
    DESC: Errors have been detected that require a reboot to ensure system
    integrity. See http://www.sun.com/msg/SUNOS-8000-0G for more information.
    AUTO-RESPONSE: Solaris will attempt to save and diagnose the error telemetry
    IMPACT: The system will sync files, save a crash dump if needed, and reboot
    REC-ACTION: Save the error summary below in case telemetry cannot be saved
    ereport.io.pci.sserr ena=1a01a29b42002c01 detector=[ version=0 scheme="dev"
    device-path="/ssm@0,0/pci@18,700000" ] pci-status=4280 pci-command=146 pci-pa=
    0
    ereport.io.pci.rserr ena=1a01a29b42002c01 detector=[ version=0 scheme="dev"
    device-path="/ssm@0,0/pci@18,700000" ] pci-status=4280 pci-command=146 pci-pa=
    0
    ereport.io.pci.sserr ena=1a01a29b42002c01 detector=[ version=0 scheme="dev"
    device-path="/ssm@0,0/pci@18,700000/pci@2" ] pci-status=4290 pci-command=147
    ereport.io.pci.sec-sta ena=1a01a29b42002c01 detector=[ version=0 scheme="dev"
    device-path="/ssm@0,0/pci@18,700000/pci@2" ] pci-sec-status=a80 pci-bdg-ctrl=
    23
    panic[cpu11]/thread=2a100449cc0: pcisch-0: Fatal PCI bus error(s)
    000002a100471e70 pcisch:pbm_error_intr+158 (300001d9bc0, 134cc00, 30000bbfdc8, 30000bbfdc8, 0, 300001d9580)
    %l0-3: 00000300001c95b8 0000000000000000 000000000196a800 000000000196a800
    %l4-7: 0000000000000001 000000000196a800 0000030000205830 0000000000000000
    000002a100471f50 unix:current_thread+170 (0, 300031e8a98, 0, ffffffffffffffff, 300001c95b8, 8)
    %l0-3: 00000000010076e4 000002a100449021 000000000000000e 0000000000000633
    %l4-7: ffffffffffffffff 00000300061793d8 000000000000000b 000002a1004498d0
    000002a100449970 unix:disp_getwork+38 (30003b74000, 18ab7c8, 180c000, 180c000, 0, 0)
    %l0-3: 00000300001c95b8 ffffffffffffffff 00000300001c9580 00000300001c9680
    %l4-7: 00000300001c9680 0000000000000000 00000300001c9680 0000000000000000
    000002a100449a20 unix:idle+d4 (182bc00, 0, 30003b74000, ffffffffffffffff, 4, 182ac00)
    %l0-3: 00000300031e8a98 000000000000001b 0000000000000000 ffffffffffffffff
    %l4-7: 00000300031e8a98 ffffffffffffffff 00000000018ab7c8 00000000010554bc
    panic: entering debugger (continue to save dump)
    Welcome to kmdb
    kmdb: unable to determine terminal type: assuming `vt100'
    Loaded modules: [ crypto cpc sd ptm ufs unix krtld s1394 sppp wrsmd ipc nca
    genunix ip sgsbbc logindmux wrsm isp usba specfs ssd nfs md random sctp ]
    [11]>
    Message was edited by:
    sky.ma

    Agreed, seems like a PCI bus error.
    Data flowing through SB4 didn't like something, so cpu11 barked out a complaint.
    Perhaps it was something passing to or from your storage
    or to and from the other partner pair.
    Install Explorer, as per Public Infodoc 82329,
    run it to gather a system configuration snapshot,
    and then go open a support case with Sun.
    At the very least, you'll find it was simply a result of a typo
    in the modifications you were making to your configuration.
    Best to let Sun Techsupport figure this out for you.

Maybe you are looking for