SCC-2345 won't recognize the (2) SCC-SG24s I installed

SCC-2345 won't recognize the (2) SCC-SG24s I installed.
They don't show up as a MAX selection.  They are installed
in J3 and J4.  I've tried moving them to different slots with
but they still don't show up.
We have a 6052E card connected to the SCC-2345.  We are
using Labview 7.0 Developer Suit.  Operating system is Windows
2000.
The (2) SCC-SG04s we have installed do show up as a
selection and work well.
Can anyone point me toward a resolution to this problem?

Alan,
Thanks for your reponse, it was dead on.
After updating, the scc-sg24s now appear as a drop down selection but now
I have another problem.  My  PCI-6052 DAQ board now does not appear as
a selection to "add".  Immediately after updating NI-DAQ I fired up MAX and
even though the scc-sg24 appeared as a selection, this selection, the
scc-2435, our pci-6052, and all other modules fitted to the pci-6052/scc-2435
appear with a red "X" next to them. 
I renamed the existing <Data> directory and allowed MAX to recreate it but the
PCI-6052 appears ONLY as a legacy selection and can not be added/selected to
DAQmx. 
I can add the scc-2345  DIRECTLY to DAQmx and also select all the modules
that we have loaded into it, but after I select <OK> I get an error message that I
haven't selected a digital interface
I'm assuming this is because I can't add the 2345(I have to add it directly to
DAQmx)  to the 6052 because the 6052 doesn't show as an available option to be
added to DAQmx. 
Do you know if there is other software or drivers I need to update?
Again, thanks for your help.
Art Cravener
Dana Corporation
Message Edited by anengineer on 10-12-2005 03:33 AM

Similar Messages

  • I want to install the new version of Adobe Flash on my Mac. I download it and when I go to install a security screen comes up with my user name. It asks for my password and no matter what I put it won't recognize the password and let me install the player

    I am trying to install the new version of Adobe Player on my Mac. I download it but can't install it. When I go to install it I get a security screen with my user ID and it asks for my password. I have reset my password but still can't get it to be accepted so I can't download the player

    Hello,
    Please see What userid & password do I need to install Flash Player?.
    Maria

  • My old mac and 3g won't recognize my iphone4s - and the new itunes on my pc won't recognize the 3g

    Hi, I'm having issues syncing my information from two separate computers to my new phone.
    I backed up my old iPhone 3g on my iBookG4. The G4 does not support the iPhone 4s because it's too old and I cannot update to Lion or Leopard because it's too old.
    I have a Dell that I bought in 2009 (i know i know, it was cheap and i had to get it for a class i was taking) - anywho, I have downloaded the new version of iTunes for the iPhone 4s and this version of iTunes won't recognize the 3g - I'm guessing because it is so outdated.
    So, I can't get the old computer to read the new phone or the new computer to read the old phone.
    What I attempted was home sharing with iTunes and that got all my music and apps, but contacts and calendars I can't move.
    Any suggestions??
    thanks.
    ps this mac is so old that the letter a just popped off the keyboard

    Syncing of devices running iOS4 and higher requires iTunes 9.x and higher.
    iOS 4.3 and higher requires iTunes 10.x or higher.
    Regardless, iTunes 9.x and 10.x require Windows XP Service Pack 3.
    Is your Windows system current with all Windows updates?

  • Iphone was in the middle of an update, and an error occurred. I think it is stuck in "restore" mode, but my computer won't recognize the device. How do I get it to work?

    My iPhone 4S was in the middle of the latest software update while connected to iTunes on my PC. After it took 45 minutes to download, a pop-up came up and said that an error had occured and it couldn't be updated. I made a mistake and clicked "Okay" instead of "More Information", and now my PC won't recognize the device and connect it back to iTunes. This happened to me last time I updated it, but I've tried everything I did last time and it won't work. I have a feeling I didn't have enough storage on my phone to update it, but now I am stuck and don't know what to do. My phone is frozen with the iTunes logo and the USB drive and says to connect to iTunes. What can I do to fix it?

    If this has happened more than once the problem is likely on your PC.
    See here: http://www.apple.com/support/iphone/assistant/itunes/

  • I have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2

    i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
    i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
    i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
    now the things i want to use with my mac that i thought would be even simpler...are not even useable...
    help

    That camera shoots H.264 in an .avi wrapper.
    You will have to transfer the files via the Finder.
    Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
    Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you.

  • I have a macbook air and  and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device"

    I have a macbook air and  and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

    I have a macbook air and  and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

  • Macbook Pro (late) 2008 won't recognize HD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???D a

    Macbook Pro (late) 2008 won't recognize HDD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???
    And HDD is APPLE certified ( 250 GB )

    Hello JashaCOLD,
    Thank you for the details of the issue you are experiencing with your external hard drive.  I found an article with steps you can take when an external device is not being recognized.
    I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I changed batteries in my Apple track pad and now my iMac won't recognize the UBS keyboard

    I changed batteries   in my Apple track pad and now my iMac won't recognize the USB keyboard

    Please read and use Bluetooth: How to set up your Apple Wireless Mouse or Magic Trackpad

  • IPod is disabled. Says to connect to itunes however itunes won't recognize the device. What do I do?

    IPod Touch is disabled. Its says to connect to itunes however itunes won't recognize the device. What do I do?

    Place the iPod in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • I backed up then erased 118 gigs worth of photos, but my storage still says I'm full.  I emptied the trash and rebooted but my computer won't recognize the empty space.  What gives?

    I backed up then erased 118 gigs worth of photos, but my storage still says I'm full.  I emptied the trash and rebooted, but my computer won't recognize the empty space.  What gives?  I erased all my iPhoto pictures from the pictures folder in Finder so I could restore a backup from my Time Capsule.  When I try to restore the library, I get a message that there's not enough room on my computer to restore.  I have a Macbook Pro with 250 gig hard drive.  I would greatly appreciate some help.  Thanks!

    If you're trying to add a large amount of data all at once, and you get an alert of insufficient space, then from the menu bar, select
               ▹ System Preferences... ▹ Time Machine
    If the padlock icon is closed, click it to unlock the settings and authenticate. Turn Time Machine OFF, then back ON and close the preference pane. Restart the computer. Test.

  • Lightroom (4.3) won't recognize the file type while importing from Canon 5d Mark iii

    Anyone mind helping me trouble shoot why my Lightroom (4.3) won't recognize the file type of my Canon 5D Mark iii ?
    I have seen this in a couple other threads but none of those suggestions worked for me. I am also a Mac user.

    Bomal9 wrote:
    I have Lightroom 4.3 and a Mark iii and cannot import raw files into Lightroom.
    The above contradicts with this:
    Bomal9 wrote:
    I am downloading images through the Canon EOS Utility manager and have to import the photos in a folder into Lightroom.
    So my reading of that is that you ARE importing Raw files from the 5D3 into Lightroom, but having to use a roundabout route to do so. Is that correct? If so, how are you trying to import when you "cannot import raw files into Lightroom", are you using a card reader or direct camera attachment? Have you tried both methods? And what happens when you do try?

  • Firefox 6.0.1 update won't recognize the home page which uses a password access which has been saved into 6.0.1.

    Question
    Firefox 6.0.1 update won't recognize the home page which uses a password access which has been saved into 6.0.1. The security shows permissions for the web site but doesn't recognize that I've been accessing the web page every day since I updated to 6.0.1. Web page trying to access is <http://classic.wunderground.com/cgi-bin/findweather/getForecast?query=zmw:98108.5.99999> This home page worked fine on earlier versions of Firefox and continues with Internet Explorer 9.0.

    Looks like its been fixed for me, not by 6.0.1 but by - Todd Siechen from http://www.dvdthemepak.com
    Check out his post at:
    http://discussions.apple.com/thread.jspa?threadID=335417
    Todd... I love you xxx
    After having a nightmare since first day of version 6.0.0 and still no fix after 6.0.1, even after Apple requested the files... You fixed my problem... Checked for duplicate fonts and found about 5, selected "Resolve Duplicates" and everything great, even with old projects... You should work for Apple!
    Check out the 2 posts:
    http://discussions.apple.com/thread.jspa?threadID=313109
    http://discussions.apple.com/thread.jspa?threadID=366383
    1) The first and biggest culprit we found to be causing problems is with font issues. In order to alleviate this problem, open Font Book and make sure all the Fonts that are turned on have no dots next to them. If they do then select them and select "Resolve Duplicates" from the Edit menu. If you are using a different font manager then use whatever tool is available to make sure no duplicate fonts are loaded. iDVD 6 is very sensitive to this.
    Many many many many many many many many many many many many many thanks.
    Regards,
    Charles Teton
    United Independent Pictures Ltd.
    http://www.makingmymovie.com

  • Upgrade won't recognize the hard disk to begin the installation

    Powerbook G4 w/ 9.2.2 & the original CD for OS X 10.1 - thought I'd get it on and upgrade from there since I know I'll need to buy more RAM - existing is 385 & I only have 10 G on the system. I downloaded several updates, ran the security update first. The 10.1.1 update won't recognize the hard disk to begin the installation.Thought I had a clue, but stuck in the jungle upgrading. Which one is which - is Jaguar 10.2??? Do I need to be doing each of these upgrades to get it running well until I add the RAM? I'm trying to stay calm since it updated my IE and I think I lost everything I had on it - too fast with the click and assumed they were separate entities....(unless there is a genius out there who can help on that front too)
    many thanks... Kate

    Hi Kate! And Welcome To Discussions!
    You're lucky Kappy is helping you out with this. He is one of the more knowledgable posters here!
    I'm just adding some extra info.
    There are two PowerBook models that need a Firmware Update, before you can install a newer OS X.
    Check if one of them is yours.
    Mac OS X Versions 10.1, 10.2, 10.3, and 10.4, are complete system upgrades that must be purchased.
    The point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), and 10.4.x to 10.4.6 (Pending), can be downloaded for free.
    Tiger is available for purchase at The Apple Store (U.S.).
    Jaguar and Panther, are no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
    Jaguar Full Retail Version CDs, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version of the Tiger Install DVD, can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, etc.
    Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
    Jaguar and Panther are only on CDs, not DVDs.
    More info here Tip: Using OS X Install CDs/DVDs On Multiple Macs
    Once Jaguar 10.2.x is installed, you can use the 10.2.8 combo update,
    or if Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final edition of either OS.
    If your Mac meets the System Requirements for Tiger, you could also consider installing that.
    And then use the 10.4.6 Combo Update.
    You'll find System Requirements in these links:
    Panther
    Tiger
    Additionally,
    "Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95."
    Download The order Form Here. Media Exchange Program
    Shop Carefully, Examine All Documention, And Good Luck!
    ali b

  • TS1369 this is the first time that i'm trying to connect my new ipod shuffle and my computer won't recognize the driver?

    My computer won't recognize the driver for my Ipod Shuffle. This is a brand new ipod so why is there an issue?

    Have you tried uninstalling and re-installing iTunes and all other Apple software to see if that makes a difference?  Use the exact instructions in this article.
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    B-rock

  • I have the first ipad and it won't recognize the charger and also the computer won't recognize the ipad when I plug it in to sync. Any ideas why?

    I have the first ipad and it won't recognize the charger and also the computer won't recognize the ipad when I plug it in to sync. Any ideas why?

    If your using the same cable for your wall charger as you are for your computer, than the problem is probably within the cable (if there isn't visible damage to the cable of coarse). The quockest solution would be to buy your self a new cable. There is probably nothing wrong with your wall adapter, so just the cable will do.

Maybe you are looking for

  • EC sales list Netherlands

    Hello, I need to generate an electronic copy of EC Sales List for the country Netherlands. I found some notes in the help.sap.com regarding the programs RFASLD20, FOT_B2A_ADMIN where RFASLD20 generates the DME file for EC Sales list and FOT_B2A_ADMIN

  • Can I change menu font size in os 9.2.1

    can I change menu font size in os 9.2.1

  • No preview in 'Open' dialog boxes?

    Whenever i opened a file or document in 10.5 within a program I could always get a preview of the document when in 'column view' (e.g. trying to open a .txt file in TextEdit). Unfortunately, this no longer appears to be the case in 10.6 - the preview

  • Is it possible to remove a ContactEmployees using DI-API?

    Hi: I need to remove from B1 database a lot of contact employees without remove the business partner, i checked out the DI-API reference and i noted that the ContactEmployees object not have a Remove method.  Does exists any form of remove this objec

  • Passing Parameter with a button vs. a Link

    I need to pass a variable value from a jsp to an action. When I use a link, it works: ">Delete</a> But I haven't been able to get the parameter to pass using a button. Stupid, I know, but I'm just blind to it...how do you do this?