SCC-68 does not show up as an accessory for PXI 6030E
I have a PXI-6030E installed in a PXI-1033. Everything works except I cannot install a SCC-68 as an accessory in MAX. SCC-68 does not show up in the list of accessories
Rick,
Let's continue this discussion here.
David L.
Systems Engineering
National Instruments
Similar Messages
-
I Have an iPad mini running iOS 7.1.2, I downloaded a new app and it's icon does not appear anywhere ( have ~ 180 apps so not at limit) and it won't open from the purchased apps list. It does not show up when I search for it so can't open t that way either. It doesn't require iOS 8. Can't delete and reinstall, cause not icon. This is not a normal "app won't open" question. it doesn't start the. Stop it just doesn't seem to exist. Any help is appreciated
Hello Chelleuri,
Thank you for using Apple Support Communities.
The following article provides information to trroublehshoot issues with installed apps, including not opening.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Regards,
Jeff D. -
Dropbox does not show up as an option for "Save As" as OneDrive does (came preinstalled that way). Dropbox is installed but I had to use Selective Sync since the Stream only comes with a 30GB drive and my Dropbox account is 1TB.
Hi @gatesoui ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Stream Notebook and issue with DropBox. Here is the support site for Dropbox.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Hard drive does not show up as back up for my computer
hi had a few things replaced by apple (lcd display, logic board) along with my hard drive. I had been using time machine to back up on this machine. now that it is back it is not recognizing that hard drive as housing my back ups. the back up hard drive shows up on the desktop and disk utility, but when i try to restore from my dvd it searches but does not find it. If i control click on the dock icon and say browse back up disks it does not come up there either. have looked on boards but cannot figure out what i am doing wrong.
The first question to answer: Is the problem with my router or with my MacBook?
Test your MacBook on other wireless networks in other locations and/or try connecting to a wireless network created by another router or two in the same location. -
SCOM 2012 Installation does not show the SQL Server Instance for reporting services
I have an issue when I try to install SCOM 2012 with the Reporting Server feature, so in the step that I have to select a SQL Server Instance I cannot do that, because as you can see in the picture no one option appears.
In my scenario I have a DCSERVER, SQLSERVER2008 R2, SCCMSERVER 2012 and in other server I are trying to install SCOM 2012. I are trying to use the same SQLSERVER to SCOM 2012.
Should I do other procedure on SQL Server before to continue? I will apreciate someone could say me what I need to do to resolve this issue.
Regards,
Paul Mendoza.Hi Paul
Can you confirm that SQL Reporting Services is installed on the server that you are doing the install.
For a lab environment where you have SCOM Management Server, Web Server on one server and SQL Server on another you need to:
- run setup on the SCOM Server and choose NOT to install reporting. The install here will create the OperationsManager database and OperationsManagerDW (reporting) database.
- run setup on the SQL Server where SQL Reporting Services is installed. Then choose to install reporting. You should then see the SQL Reporting Services instance on the above window which is blank in your screenshot.
Take note of the warning in that window - SCOM uses its own role based security within SQL Reporting Services and this can break other reporting. E.g. you can't install SCOM and SCSM reporting (SQL RS component) together.
Cheers
Graham
New SCOM 2012 Blog! - http://www.systemcentersolutions.com/blog/
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/ -
My Menu bar has disappeared and it does not show up in any menu for toolbars
I must have hit a wrong shortcut or something.
My bookmarks bar and menu bar disappeared.
I was able to restore the bookmarks bar in customize the usual way.
But in every place I can get the little toolbar menu, it only shows the Bookmarks bar, not the the Menu bar
How can I get my menu bar back???# Press''' Alt '''or '''F10''' t o see '''Menu bar'''
# Click on '''View '''>> '''Toolbar''' and mark '''Menu bar'''
*Or right click in empty space on navigation bar and mark '''Menu bar'''.
*Or go to '''Customize tab''' at bottom click on '''Show/Hide Toolbar''' button and mark '''Menu bar'''
Also have sure you aren't in '''Full Screen''' Mode, you can alternate using '''F11 '''or going to''' View''' menu and unmark '''Full Screen''' option. -
RoboHelp9 HTML Trial does not show images in Create PDF for Review
When I do Create PDF for Review, the pdf shows only the gray rectangular placeholders for our logo and another image at the top of each pages instead of the actual pictures. Is this a bug or it is supposed to work like that?
Just in case this has anything to do with it:
Some of RH's PDF Creator Add-in X features did not work on my new Win7, 64-bit, Office2010 machine, and said I couldn't then install my Adobe Standard 7.0 CD because "you have a better product installed". The techs got on my machine for 2 1/2 hrs. and couldn't get it to write pdf via Printed Documentation and were going to try to re-create it in their lab. A week later I uninstalled RH's PDF Creator Add-in X and installed my Standard 7.0 and I can now do Printed Documentation to pdf. Would this have caused the problem in first sentence?I cannot be sure but I would say it is highly likely. PDF Review is designed to work with Acrobat 9 or X. I know Word 2010 has some issues with Acrobat 9 so if you are using 7, nothing would surprise me.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Adobe does not show up as a program for me to scan with
When I select my scanner (hp Laserjet 1522 mfp) it opens and asks which program would you like to use to scan. Adobe used to be an option. After reinstalling it is not anymore. The options are word, and publisher. How do I get adobe back into the list of programs to use. There isnt an option to add another program.
ThanksCan you please try following steps?
1. Download TWACKER (Twack_32.msi) from http://www.twain.org/downloads.shtm
2. Install it.
3. Go to <Program files>\TWAIN Working Group\Twacker 32 and invoke Twack_32.exe.
4. Go to File menu > Select Source.
5. Select the TWAIN driver (not the WIA driver) for HP M1212nf and Click OK.
6. Now, invoke File > Acquire menu.
7. What happens? Do this work?
If by executing the above steps also you get one page at a time, this is certianly Scanner driver's issue. Please lets us know the results. -
App does not show up when I search for it in Apps on Iphone
Hi All,
When I search for "My Vodafone" App in Apps on my iphone 5 I only get "My Vodafone (NZ)", New Zealand.
I want the one for Ireland and I know it exists. I live in Ireland, my phone was bought in Ireland.
How do I find the Irish version of "My Vodafone". I had it before and deleted it, but want it back.Hello Chelleuri,
Thank you for using Apple Support Communities.
The following article provides information to trroublehshoot issues with installed apps, including not opening.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Regards,
Jeff D. -
Any suggestions?
I had this problem, after I uninstalled the previous Lightroom installs I had, Lightroom 6/CC was available but it did not work at first. I was able to fix it by editing the Windows registry (it was only a minor edit).
I changed the value of the following registry key:
HKEY_CLASSES_ROOT\Adobe.AdobeLightroom64\shell\open\command
The value was:
C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.7\Lightroom.exe "%L"
I changed it to:
C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe "%L" -
I am unable to delete any of the installed apps on my iPAD2. If I press on the icon , it merely starts shaking but no longer displays the X sign in order for me to delete it.
I also notice that I am unable to display the HIDE tab if I swipe on any of my purchased apps.
I think this may be happening after I upgraded to iOS 6
Any help much appreciated, thanks
Ramji AbinashiCheck your restrictions:
Settings>General>Restrictions>Deleting Apps
The Hide features is no longer available. -
Expense Report Summary page does not show any totals - only zeros
Hi All,
On creation of Expense Report in the portal When entering a billable expense report, when you get to the summary page is does not show any totals - only zeros for other two schema's its working fine like displaying totals
we are surprised that any custom development is hitting or anything relates with configuration
Provide valuable inputs to proceed further
Regards
JaipalHello vetsrini.
Thanks a lot for your kind reply. As i said, i'm new to this and sometimes i just cannot pass over some problems. Here are the fields i have inserted:
<?for-each:LIST_G_SETUP/AS_OF_DATE?>
<?end for-each?>
<?for-each@section:G_CUST_INV?>
<?for-each:G_1?>
<?INVNUM?>
<?INVOICE_TYPE_INV?>
<?DUE_DATE_INV?>
<?sum (C_INV_BALANCE)?>
<?sum (C_INV_B0)?>
<?sum (C_INV_B1)?>
<?sum (C_INV_B2)?>
<?sum (C_INV_B3)?>
<?sum (C_INV_B4)?>
<?sum (C_INV_B5)?>
<?end-for-each-group?>
<?TOTAL_INV_AMT_DSP?>
<?TOTAL_INV_B0_DSP?>
<?TOTAL_INV_B1_DSP?>
<?TOTAL_INV_B2_DSP?>
<?TOTAL_INV_B3_DSP?>
<?TOTAL_INV_B4_DSP?>
<?TOTAL_INV_B4_DSP?>
<?end for-each:G_CUST_INV?>
In the header of the template i also have <?CUST_NAME_INV?> and the report date. When i try to enter the <?AS_OF_DATE?> it is not printed and also the header is not shown any longer. Once again, thank you for any help,
Octavio -
Depreciation Simulation report does not show future years Depreciation
Hi experts
Depreciation Simulation report (S_ALR_87012936) does not show future years simulated depreciation for depreciation areas other than 01. I try to run for 7 years in future, other then area 01, all other areas only show the current fiscal year and zero for future years even though there are values.
Any ideas would be much appreciated.
Edited by: AG on May 5, 2011 1:21 AMHi
Please check settings of Simulation Varinat at IMG> Financial Accounting>Asset Accounting>Information System>Define Simulation Variants for Depreciation Reports. Check settings for depreciation ares for which you are facing issue.
Hope this helps!!
Murlidhar Khatri -
Newly added field does not show in table genarator.
Hi,
I have added one more field to my custom table.
When I make new entries in table maintanance, the new field does not show up.
Thank U for Ur time.
Cheers,
Samhai sam raj,
first activate your database table .
if any error occurs better you go to
se14(database utility) -
>give table name in object and select the table check box and click the edit push button.
and then click activate and adjust pushbutton.
surely you ll get some idea.
reward points if those idea helps.
thanks,
velu. -
Router 7606 does not show the inventory for the Fan module
I have a issue with a router 7606, specifically with fan module, the LC go down because it does have sufficiently cooling , I changed the Fan module, the IOS, The power supply, and I still have the same issue, Besides the Router does not show the inventory or PID for module fan,
logg" system minor alarm on operating fan count"
Someone knows what could be happening,Check this:
Can you try this;
7606-01#show environment status fan-tray 1
fan-tray 1:
fan-tray 1 type: FAN-MOD-6SHS
fan-tray 1 mode: Auto
fan-tray 1 fan-fail: OK
7606-01#show power
Fan Type Watts A @42V State
1 FAN-MOD-6SHS 180.18 4.29 OK............................ FAn try
If above doesnt work then try the below link:
https://supportforums.cisco.com/discussion/10824271/7606-s-and-fan-module-6shs-version-1
HTH
inayath
*Plz dont forget to rate if this info is helpfull.
Maybe you are looking for
-
Kindly help in this regards.. its a file to file Bpm collect message scenario <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> - <!-- Call Adapter --> - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmls
-
How do I make the Reading List window in Safari disappear
All of a sudden, a very irritating window or tab opened on the left side of my Safari Window asking me if I want to add the current page to my "Reading List". I don't have a reading list, I don't want a reading list, and I want this window to go awa
-
Type Casting? When to use this concept?
There is one question bothering me very very much. When should I use type casting? For example ClassNameQ c = (ClassNameQ) ......displayable How do I know which 'cast type' to use? Is there a suitable pattern we need to follow so that we can know 'Ah
-
I have ztable with fields field1 and field2. I want a f4 help to set up on field 1 with more then 10 char.. eg..if I do a f4 help on field1 I want to get the pop with /zdatadictiionaly/field1234 and /zdatadictionay/field12342. I tried to do pu the fi
-
Pop-Up Menu getting hidden behind Layers - HELP!
I'm designing with layers instead of tables for the first time. I've just begun inserting vertical Pop-Up Menus as usual as part of my navigation buttons and when I checked it in the browser, I saw that the menu is getting hidden behind the separate