SCC4- Client Role ? in Client Setting

Hell Friends,
I need some information on Client's Role Setting in SAP system  in SCC4.
Which role need to be assigned to each client based on the requirement/purpose in a SAP System ?
Here, i am giving brief information on the Clients created in our SAP System Landscape.
SAP ECC DEV System
          100 - Golden Master Client
          110 - Unit Testing Client
          120 - ABAP Development Client
          190 - Sand Box Client
SAP ECC QAS System
          200 - Integration Testing Client
          220 - Training Client
SAP ECC PRD System
          300 - Production Client
          310 - Pre- Production Client
Now, my question is which role is assigned to which Client in "Client Role" setting under SCC4, based on the Purpose of the respected client. ?
I am waiting for your valuable response.
Regards
Bhavik G. Shroff

Hi Presu,
Thank you very much for your valuable response. This inforamtion is useful for the Client Setting in SAP System.
But, I also want specific information for this setting in SCC4.
Client Role:
                   C Customizing
                   D Demo
                   E Traning/Education
                   P Production
                   S SAP Reference
                   T Test
Based on my client List, which Client Role need to be assigned to Which Client ,according to their Purpose ?
Regads
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Jul 11, 2009 12:44 PM

Similar Messages

  • Setting client role in non-production systems

    In our QA test systems of R/3 and BW, the client role  in SCC4 was set to 'Production'. The reason I was given is that  by setting the client role to 'Production', will enable some settings in FI such as period closing,and customizing settings remain open  without transportable requests. I totally disagree with this. I worked on numerous projects, but this is first time I am hearing this. I always set client role to Test in non-production systems, without any problems. Do any one have  any idea about this?
    Thanks
    Santosh

    SAP have a concept of "current settings".  These include things like exchange rates and other items which really appear to be configuration settings.  In a non-modifiable system these cannot be changed because the transport management system tries to get involved.  If the client is set to productive, this restriction is overridden.
    I would always suggest that the QA system should be set to productive and non-modifiable to ensure that the behaviour of the transactions affecting such objects can be tested in a production-like environment.  If you need to have your QA system open for any sort of changes you are exposed to having changes introduced in QA to leading to the impression that new/modified functionality or config works but when the transport takes the unmodified version to production you'll be in trouble.

  • Setting Quality Assurance System Client role to Production

    Good evening all.
    I have had my customer ask if it would be possible to set the client role for our QA system to "Production".  The reason for this is that a number of transactions that they perform within production require that the QA system be opened when they wish to try them first in QA.
    Examples of the transactions are:  KSC1, KSC2, KSU1, KSU2, OB52, OB08.
    I know that changing the setting is possible, but what are the issues with doing this to the QA system?  Is this something that shouldn't be done except when necessary, and if so why?
    Thanks for your help!
    Joe Johnson

    Thanks for the answer, but I understand the process.  I am looking to see what the implications for setting a QA environment to a production role would be, and what are the negatives of doing so.
    The processes mentioned don't require that the production environment be opened, and the users would like to see the same for QA....
    Thanks!

  • Can´t choose client role "Development" in scc4

    I cant´t choose the client role "Dev" in the scc4.
    How is the way to activate that?
    Thanks.
    Best,
    Jens

    It should show up as 'Customizing'.  What release of NetWeaver are you using?  Also, are you sure you supplied a non-production license in SLICENSE?
    Regards,
    Matt

  • User Acceptance Client role setting

    What are the pros and cons of setting the User Acceptance Test client role parameter to P (Production) rather than T (Test).  I thought that it should be set to P to mirror the settings for the Production client.  Note: settings found in T000 Table

    If you set the client role to Production, then it will be counted as a productive client for licensing purposes by SAP.  That could have a financial impact.  Also, I think you are only supposed to have one productive client per installation number, though I don't know if this is an actual technical limitation.
    You are correct that as a Test client there are a few things which will behave differently than in a Production client, but these are mostly immaterial for user acceptance testing purposes.  For the vast majority of business functions, there will be no difference.
    So, I would advise setting the client role to Test.  Do set it to 'not modifiable,' however, so that changes are forced to be made via the transport system, the same as production, and thus generally keeping the configuration in better sync with Production.
    --m

  • Client Roles in a Three System Landscape

    I initially post this Question in other forum:
    Hi all,
    We have a three system landscape. In the Development client, we have the Customizing Client, the Sandbox Cliet and a Training client. I have some questions about this configuration:
    Acording to System and Client Settings - System Administration Assistant (BC-RRR) - SAP Library, Training client must be in Quality Assurance System, and it must be created by client copy from client QTST (it gets the transports from Custimizing). In this Training System we must create users for all our key-users to training. We must not create any user for key-users in sandbox client (this client is for the DEV team). is that ok?
    What are the downsides of having out TRAINING client in the Development System?
    Now, a consultant is asking me to open some modifications in the TRAINING client: He needs to load Exchange rates (OB08) in that client, but he is getting "Client is not modifiable". They are asking me to create users for key-users in the sandbox client and the training client.
    I need to know if they are using the system in the right way. I dont want the system to become a mess.
    I been reading this notes: SAP Note 356483. I don´t know what this means: "Now the corresponding Customizing object is no longer subject to the transport connection and is excluded from the changeability check. The change is active in all clients of the system. You can also change the Customizing object in a locked client (independent of the client role). However, now it is also no longer possible to manually transport entries of the view or table."
    Aditional notes:
    SAP Note 78329,  sap kb 356483
    Thanks for your help!
    One person answere me this:
    Hi
    You should create your question in the appropriate area :
    Software Logistics
    The drawback of having training client in dev system is that it could be negatively impacted by ongoing changes performed in that system (custom program that are changed, not working...)
    Some specific customizing changes can be set as current setting and thus can be modified without needing to open customizing but only if the client is set as productive.
    There is also a way do deactivate modification recording of objects (aka deactivating the transport connection) but, if you apply this change for this activity/object, you won't be able any more to record change into transport orders
    Regards
    356483 - Customizing: Current settings in the test system
    77430 - Customizing: Current settings

    Hi Andres
    I do not really now the exact impact, it might prevent some business data from being mass processed or overwritten...
    I did had to deactivate the transport connection on specific objects/activities for some customers.
    It depends on the frequency of that activity. I don't like to open the client to modification as you can sometime forget to close it back, and sometime also it gave the opportunity to other consultants to make changes that would create inconsistency among envt in the whole landscape.
    At least activating the recording of changes could help in tracking the source of modifications
    RZ10 => rec/client=ALL
    STMS => RECCLIENT=ALL
    Regards

  • Importance of Client Role

    Hello All,
    Can any one explain me the importance of a client role in SAP. All clients in QTY are termed as "Test"/Training/Reference" and the ones in DEV are termed as Customizing etc. But what if i change a test to production ? How would it effect the system ? If it does not effect the system then why are these classifications provided in SCC4. can any one enlighten me on this topic.
    Thanks for your answers and points are in for sure.
    Rgds,
    Sri

    Hi Raghu,
    Client in SAP represents a organization. Generally if you dont have a seperate quality system(which would be replica of your prd system) this would be used for testing, then we create a different client for testing inthe same develpoment system.
    Basically in Development system we create a client in which you want to develop some customized applications and maintain some client specfic changes.
    Regards,
    Vamshi.

  • Scc4 recording and rec/client relationship

    Hi,
    Hoping someone could shed a light on this item!
    So in SCC4 we have client independent settings and client dependent settings.
    If client dependent settings is set to ''0'/'blank' that means no automatic recording of changes
    If client independent settings is set to '0'/'blank', it says "changes to repository and cross client customizing allowed"
    So for this, is there recording or no recording being done?
    Say if there is NO recording, but rec/client settings is set ON, does rec/client settings take precedence? and hence there will be recording as long as rec/client is ON?
    Thanks in advanced!

    you assing logical system to a client from SCC4

  • [jsr82] can a j2me app be a Bluetooth server and client role in parallel?

    I want to make my j2me app register a special service channel and listen to it, meanwhile, I also want to start a client to connect to other handset which has the same services. In Bluetooth protocol side, this is obviously OK, but in J2me is this design possible? some people said that in jsr82, the Bluetooth device is exclusive for J2me app, app cannot be both server role and client role at the same time. Can anybody give me a definite answer?

    No this design is not possible with JSR 82. Because when the device acts as a server it can't be used as a client as whenever you will run the client code the server mode will disappear.
    But what maximum you can do is when you need the client to run close the server and switch into the client mode but I think you don't need this solution.
    Shan!!!

  • Regarding Client Role change in DEV system.

    Hi All,
    I had some requirement from SapHR they want to do some Holiday calender changes in Sap Level.
    and we have only Test Role client in our Dev System. They want me to change the Client Role from Test to Customizing Client.
    Kindly let me know if Client Role is changes from TEST to CUSTOMIZING. is there any inconsistany in TMS.
    Thanks,
    Abdul

    Hi,
    Run BDLS to change the source system assn. Then check to see if all your transfer structures are active and also your source system is now the correct one. Easiest way is to goto RSA7 on the src system and see where the system is pointing to.
    Cheers,
    Kedar

  • Establish a connection through RF modem's on client & server side & to set up PPP communication for data transfer

    hi
    can any1 over here help me out in how to establish connection between 2 RF modem's for data transfer , between client & server USing LABVIEW?
    I want to establish a connection between 2 PC's through  RF modem on client & server side & to set up PPP communication for data transfer.
    (I have tried data transfer through RS-232 using TCP/IP whn the 2 PC's are connected over ethernet... which is working.
    I also tried connecting loopback cable between 2 PC's COM port & geting data transfer using VIsa configure serial port & other visa functions  ... which is working)
    can u guide me how to establish connection between 2 RF modem's using LABview?
    & how does the data transfer take place between 2 RF modems through RS-232?
    is it using TCP/IP?
    If you got any links to go abt this issue do send me related links .. or any examples .....
    I am currently using Labview version 8.
    Waiting in anticipation.. reply ASAP..
    thanking you
    Regards
    Yogan..

    Howdy yogan,
    Maybe you could clarify a few things for me, and we'll see how we can help ya. TCP/IP protocol occurs through an ethernet connection; RS-232 communication occurs through an RS-232 serial connection, typically through a cable that has a DB9 connector on both ends. Do you mean that the RF modems in question have the option to communicate via RS-232 and/or via TCP/IP ethernet? Specific information like the manufacturer of your RF modems, the model number of your RF modems, and how you connect the modems to the PC would enable us to give you more efficient support.
    You can check our Instrument Driver Network (IDNet) to see if a plug-and-play/IVI driver already exists for your RF modem. (You'll need to know its manufacturer and model number.) In the case that you do find an IDNet driver for your modem, you can use this KnowledgeBase article for instructions on how to use the driver.
    Another excellent resource to consider is the NI Example Finder. You can access this within LabVIEW by navigating to Help»Find Examples and then searching for serial or TCP/IP examples.
    Message Edited by pBerg on 03-10-2008 04:35 PM
    Warm regards,
    pBerg

  • Setting up a new client. Is "client copy" necessary?

    Hi,
    I just installed NSP. As I don't want to work in client 000, I have created a new development client 100.
    Our internal notes suggest that I must always copy client 000 to client 100. However, this takes up a few hours and chews up another 30G of harddisk space.
    This is a freshly installed system just for testing. I am wondering if "client copy" is really a must or just a suggestion. What exactly do I lose if I don't do a client copy?
    Thank you in advance for your help.
    Peter

    Can someone please help me? I still haven't received a good reply on how important it is to do a client copy.
    In my test case, I like the base client 000 to have nothing in it. I then would like to set up two totally different companies as two different clients. These companies have nothing in common. I don't see why I really should do a client copy.
    Regards,
    Peter

  • Owb$client role

    Hi,
    I have a question regarding privileges which are necessary for OWB. I am not an OWB specialist, so hope someone can give me god advice here.
    Our OWB setup is to have one 'technical' account for executing all OWB flows and mappings - this user is granted OWB Client roles and privileged i.e. OWB$Client, OWB_USER and OWB_DESIGNCENTER_VIEW roles and so called 'target' DB schemas where only data are stored with simple DB privs. like 'create table, view, procedure' etc.
    This 'techincal' OWB user have on DB level all necessary privileges on objects in 'traget' DB schemas in order to execute procedures, manipulate data etc. This means that privilege resolution on DB level for this user works fine.
    But, in order to execute OWB flows and mappings out of this 'technical' OWB user which are modofying data in our 'target' DB schemas our developer is requesting the 'target' DB schemas must be also granted OWB$Client, OWB_USER and OWB_DESIGNCENTER_VIEW role.
    Is this really necessary? If yes, why?
    many thanks,
    goran

    Hi Goran,
    But, in order to execute OWB flows and mappings out of this 'technical' OWB user
    As I understand you developers plan to execute mappings under target user. In this case their requirement is justified.
    Regards,
    Oleg
    P.S. In my opinion direct granting privileges to OWB-related database users is a bad practice.
    The only legal and documented way for configuring OWB is using OWB utilities (like Repository Assistant, Design Center etc. - look at OWB Administrator guide http://download.oracle.com/docs/cd/B31080_01/doc/install.102/b28224/security.htm#BGBEBFEG)

  • Client Role

    Hello everybody,
      I confused  about  following client roll.
    Test
    Demo
    Training/Education
    SAP Reference
    Please give some details information about the above client Role
    Thanks

    Hi Ganesh,
    when a Client is being created..we decide as per in what way the client should be
    used.we can know about a client by the settings and the role assigned to it.
    If we use the client for customization ..we choose Development
    for Quality testing we assign the role Test,if we are using it for
    production-Production.
    Below are the links which might help you ...understand about the client role.
    Go through [site1|http://help.sap.com/saphelp_sm32/helpdata/en/6c/a74a3735a37273e10000009b38f839/content.htm] and [site2|http://help.sap.com/saphelp_46c/helpdata/en/2e/d9530294f911d283d40000e829fbbd/content.htm]
    In this pages ..try to read about the client roles and their associated client settings..Hope this helps,
    Regards,
    Manjula .U

  • How to transfer file from one client to another client?

    hello,
    i have some questions and hope you all can help me..thanks a lot first..
    Here are the questions:
    i) How can i send a file from one client to another client using RMI?
    ii) Does the client(sender) need to send the file to server, then server save it and then send it to another client(receiver)?
    iii) If using RMI, a client can receive two files from same client(sender) or different client(sender) at a same time? how to do it? when both of the files come in from same port, how to differenciate them?
    iv) For your information, i am doing the File Transfer Server-client application which sender can send any file to other client. Can you give me any ideas? thanks..
    Last, thanks again..

    Your questions reflect some ambiguity in terms.
    "Client" and "server" are commonly used in two different senses:
    1. Technical sense: A client process makes requests, and a server process fulfills the request (provides a service).
    2. IT sense: A client computer (process) makes requests of a server (computer) process, and the server (computer) processes the request.
    In the first case, any computer might be a client, or a server, or both, depending on the processes being executed. In the second case, the computers are assigned some role.
    So: If you wanted to, you could implement client/server processes communicating between two peer computers, using RMI.
    This may not be what you wanted; if you really want to distinguish client and server computers, then the answer is that yes, you will probably put files into intermediate storage on the server computer.
    Finally, you probably do not have to worry about port conflicts if you use RMI; while the initial client server contact is established through a registry operating on a standard port, the actual RMI communications is established using random ports, one for each link.

Maybe you are looking for