SCC4 - Protection against SAP upgrade

Hello guys,
i have a question regarding to the "Protection against SAP upgrade" flag in SCC4 for the client settings.
I know that this flag will make a client unusable in case of an upgrade (for example from ERP2004 to ERP2005), but what is about applying support packages?
Is this flag also valid for support packages?
The documentation about this parameter does not make a statement to this point:
> If this flag is set, the client is no longer supplied with data during SAP upgrades. After an SAP upgrade, it is not possible to work actively in the client. The flag can only be set for a test client or an SAP reference client (Early Watch).
Does SAP understand "applying support packages" as an upgrade?
Answers will be rewarded.
Regards
Stefan

No.
Applying SP is not SAP upgrade.
-Pinkle

Similar Messages

Each time I start Firefox it says: "URGENT! Your version of Firefox is no longer protected against online attacks. Get the upgrade - it's fast and free!" I am using ver. 3.6.13 and upgrading "successfully" only stays on 3.6.13 with same URGENT message.

Each time I start Firefox it says:
"URGENT! Your version of Firefox is no longer protected against online attacks. Get the upgrade - it’s fast and free!"
I am using ver. 3.6.13 and upgrading "successfully" only stays on 3.6.13 with same URGENT message.

Your UserAgent string in Firefox is messed up and needs to be reset. 
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter 
''If you see the warning, you can confirm that you want to access that page.'' 
Filter ='''general.useragent.''' 
Right-click the preferences that are '''bold''', one line at a time, and select ''' ''Reset'' ''', 
Then restart Firefox

What is the best protection against virus

what is best protection against any virus.

what is best protection against any virus.
You.
There will always be threats to your information security associated with using any Internet - connected communications tool:
You can mitigate those threats by following commonsense practices
Delegating that responsibility to software is an ineffective defense
Assuming that any product will protect you from those threats is a hazardous attitude that is likely to result in neglecting point #1 above.
OS X already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "clean up", "speed up", "optimize", "boost" or "accelerate" your Mac; to "wash" it, "tune" it, or to make it "shiny". Those claims are absurd.Such products are very aggressively marketed. They are all scams.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources.
Illegally obtained software is almost certain to contain malware.
"Questionable sources" include but are not limited to spontaneously appearing web pages or popups, download hosting sites such as C net dot com, Softonic dot com, Soft pedia dot com, Download dot com, Mac Update dot com, or any other site whose revenue is primarily derived from junk product advertisements.
If you need to install software that isn't available from the Mac App Store, obtain it only from legitimate sources authorized by the software's developer.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iCloud, iTunes, or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Java can be disabled in System Preferences.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Beware spontaneous popups: Safari menu > Preferences > Security > check "Block popup windows".
Popup windows are useful and required for some websites, but unsolicited popups are commonly used to deceive people into installing unwanted software they would never intentionally install.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever receive a popup window indicating that your Mac is infected with some ick or that you won some prize, it is 100% fraudulent. Ignore it.
The same goes for a spontaneously appearing dialog insisting that you upgrade your video player right this instant. Such popups are frequently associated with sites that promise to deliver "free" movies or other copyrighted content that is not normally "free".
The more insistent it is that you upgrade or install something, the more likely it is to be a scam. Close the window or tab and forget it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. Most of these attempts are pathetic and are easily recognized, but that hasn't stopped prominent public figures from recently succumbing to this age-old scam.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

SAP Upgrade Templates

Hi
Can any one send me the templates that are used for an SAP Upgrade project.The kind of templates i need for Change request,Project issue,Upgrade Checks and other......
If you have any other templates regarding Upgrade project, kindly mail to my e-mail id:[email protected]
Thanks in Advance
T.Ram

Hi,
Please follow the below mentioned link. You will get clear understanding about the upgrade here..
https://wiki.sdn.sap.com/wiki/display/HOME/ERP2005+Upgrade
Incase of any specific requirement, please get back.
Regards,
Imran

Target client is productive and protected against client copy

when copy 000 with tran code sccl its give error
Message no. TA133
Target client is productive and protected against client copy

Hi Rahul,
I mean:
Execute SCC4.
Push the "Edit" icon at the top (pencil).
Double-click the target client.
At the new screen, change the Client Role (you can select "Test").
Change the combo "Protection Level" to Level 0.
Save changes.
After the Client Copy, you can revert all these changes to the original status.
Regards,
JC Llanes.

Does BOBJ support OR select statement against SAP BW

Hello,
We are looking at BOBJ for reporting against SAP BW, and I was wondering if BOBJ supports select OR statements and select AND statements in the same report.
For example.
We have three select parameters:
Company Code
Document Type
Vendor
The business would like to run the following select statements:
Company Code = 1010 AND
Document Type = WE OR
Vendor = 123123
or from the same query, run the report this way:
Company Code = 1010 AND
Document Type = WE AND
Vendor = 123123
Is this possible? If yes, what options do we have.

Hi Bill,
there are several options to achieve this:
In the BI Query you have a parameter type that is called "selection option" which allows the end-user to create very complex selection.
In Crystal Reports you can create your own filter / parameters but you would have to pay attention to make sure that the parameters are being send down to the server.
in Web Intelligence / a Universe you could do the same like in CR.
Ingo

RFC Send could not be resolved against SAP system because its metadata could not be obtained...EXCEPTION FU_NOT_FOUND RAISED

Hello,
I am getting the following error in sending IDOC to SAP via WCF-SAP adapter in BizTalk Server 2009. I have the SOAP header in the adapter mentioned below. Also, wondering what is the convension for Action URL? Is it always "http://Microsoft.LobServices.Sap/2007/03/Rfc/"
+ Operation name mentioned in the Orchestration? I would appreciate if anyone could help me resolve this error.
The adapter failed to transmit message going to send port "SendReceive_PO_IDOC_TO_SAP" with URL "sap://CLIENT=111;LANG=EN;@a/123.456.789.101/00?GWHOST=123.456.789.101&GWSERV=sapgw00&ListenerProgramId=ABCDEF111&RfcSdkTrace=False&AbapDebug=False".
It will be retransmitted after the retry interval specified for this Send Port. Details:"Microsoft.ServiceModel.Channels.Common.MetadataException: RFC Send could not be resolved against SAP system because its metadata could not be obtained. ---> Microsoft.Adapters.SAP.RFCException:
Details: ErrorCode=RFC_EXCEPTION. ErrorGroup=RFC_ERROR_APPLICATION_EXCEPTION. SapErrorMessage=EXCEPTION FU_NOT_FOUND RAISED. AdapterErrorMessage=An error occurred while determining the function interface of the RFC Send.
at Microsoft.Adapters.SAP.RFCException.HelperThrow(Int32 retCode, String additionalErrorMessage)
at Microsoft.Adapters.SAP.RfcClientConnection.GetRfcFunctionInterface(String rfcName)
at Microsoft.Adapters.SAP.InternalRfcMetadata..ctor(String originalRfcName, SAPConnection sapConnection)
at Microsoft.Adapters.SAP.SAPMetadataContract.ResolveOperationMetadata(String operationId, TimeSpan timeout, TypeMetadataCollection& extraTypeMetadataResolved)
at Microsoft.ServiceModel.Channels.Common.Design.MetadataCache.GetOperationMetadata(String uniqueId, Guid clientId, TimeSpan timeout)
at Microsoft.ServiceModel.Channels.Common.MetadataLookup.GetOperationDefinition(String operationId, TimeSpan timeout)
at Microsoft.Adapters.SAP.SapFunctionMetadata.ResolveOperationMetadataUsingSdk(String absoluteName, String displayName, String funcName, String operationNamespace, SAPConnection sapConnection, Boolean isTrfc, MetadataLookup metadataLookup, TimeoutHelper
timeoutHelper)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)".
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
SOAP Header:
<BtsActionMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Operation Name="Send" Action="http://Microsoft.LobServices.Sap/2007/03/Rfc/Send" />
</BtsActionMapping>
Thanks,
Tarun

Hello Morten,
The Send is actually just the name of the operation in Orchestration and it does not exist in SAP. Hence, do I really need to have the SOAP header in WCF-SAP adapter or can I send the IDOC without any SOAP header info? When I try to send without
SOAP header I get the following error. Can you help me resolve this?
The adapter failed to transmit message going to send port "SendReceive_PO_IDOC_TO_SAP" with URL "sap://CLIENT=111;LANG=EN;@a/123.456.789.101/00?GWHOST=123.456.789.101&GWSERV=sapgw00&ListenerProgramId=ABCDEF111&RfcSdkTrace=False&AbapDebug=False". It
will be retransmitted after the retry interval specified for this Send Port. Details:"System.ArgumentNullException: Value cannot be null.
Parameter name: key
at System.ThrowHelper.ThrowArgumentNullException(ExceptionArgument argument)
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.CreateChannelFactory[TChannel](IBaseMessage bizTalkMessage)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.InitializeValues(IBaseMessage message)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2..ctor(IBaseMessage message, WcfTransmitter`2 transmitter)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfTransmitter`2.GetClientFromCache(String spid, IBaseMessage message)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfAsyncBatch`2.BatchWorker(List`1 messages)".
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Thanks,
Tarun

SAP Upgrade from SAP R/3 4.6 C to ECC6.0, Delete DMC componenet

Dear All,
We are upgrading SAP from R/3 4.6C to ECC6.0 . Our client has installed DMC in 4.6C as a "Main transport" request . DMC becomes an Add-on tool in ECC6.0 . SAP pepare phase recognize DMC is already installed in 4.6C and required upgrade CD 51031689. Upgrade CD 51031689 is not available in marketplace and required an restricted access . Actually we are not using DMC component and would not planning to upgrade to DMC 6.0 . SAP Upgrade Prepere phase has facility to mark as "Delete" for unwanted add-on componenets. We are able to select "delete" radio button for other Add-on compoenents but unfortunately "IS_SELECT" phase doesn't provide me an option to select "delete" radio button .Any help/suggestions are highly appreciated.
Thanks
Mahendra

Hi
Try this link, which will give functionality enchancements between different versions of SAP.
http://solutionbrowser.erp.sap.fmpmedia.com/
Regards
Ramakrishna

Error in SAP Upgrade 4.6C to ECC 6.0 in CONFLICT_CHECK Phase

Hi All,
I am doing an SAP Upgrade frm SAP 4.6C SR2 to ECC 6.0 SR2. When it enters the CONFLICT_CHECK we are facing the following error. i am performing this on Production system. Your immediate help is highly appreciated.
#---- MASKING file CONFLCHK.LOG from E:\usr\sap\put\log
#---- TIME: 20091212095249
1 ETQ201XEntering upgrade-phase "CONFLICT_CHECK" ("20091212094722")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '22', GwService = 'sapgw22'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=0
4 ETQ399 (trc) R3upExtendedInclusion: TRUE (default)
4 ETQ399 (trc) R3upExtendedInclusion: TRUE (default)
2 ETQ160 Starting conflict check
4 ETQ010 Date & Time: 20091212094722
4 ETQ230 Starting RFC Login to: System = "CPA", GwHost = "DERSHASKFI140", GwService = "sapgw22"
4 ETQ359 RFC Login to: System="CPA", Nr="22", GwHost="DERSHASKFI140", GwService="sapgw22"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_CONFLICT_CHECK" by RFC
2EETQ360 RFC of "spda_conflict_check" failed:
2EETQ361 code/exception : SYSTEM_FAILURE
2EETQ362 key             : RFC_ERROR_SYSTEM_FAILURE
2EETQ364 message         :
2EETQ399 SQL error 1654 occurred when accessing table OCSCMPLOBJ                    .
4 ETQ359 RFC Login to: System="CPA", Nr="22", GwHost="DERSHASKFI140", GwService="sapgw22"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "SPDA_CONFLICT_CHECK" by RFC failed (error-status "-2")
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20091212094903
4 ETQ010 Date & Time: 20091212094903
Hemanth

Hi,
> 2EETQ399 SQL error 1654 occurred when accessing table OCSCMPLOBJ
Have you checked tablespace have sufficient space ?
Thanks
Sunny        .

Itunes error. the data execution prevention pops up and says "to protect your computer, windows has closed this program. Data execution prevention helps protect against damage from viruses and other threat.

I have a windows Xp computer. and i needed to download the newest itunes to support my ipod touch. but now my computer doesn't let me open itunes. The the data execution prevention pops up and says "to protect your computer, windows has closed this program. Data execution prevention (DEP) helps protect against damage from viruses and other threat." I tried excluding itunes from DEP on settings but it still doesn't work. I don't know what to do. please help me!!!
thanks

try to select the computer cd/dvd autorun off.
I had the same problem, then Kaspersky software found a conflict suggesting me this solution.
Itunes now works...even if it always asks to set the cd/dvd autorun on when lunched.

Designer hangs during universe creation against SAP BW

Hi,
We are trying to create OLAP universe against SAP BW 3.5 and we are running into issue wherein the designer just hangs and is not able to create the classes and objects, in most cases we have waited for about 30-35 mins and still it doesn't come back. We tried this for both against an Infocube as well as against BW query.
I have couple of questions regarding the process flow for universe creation against SAP BW,
Does universe stores/extracts any data from BW, like storing LOVs for the hierarchies? I know it does reads the rows, columns, free characterstics etc. in case of BW Query.
The time to create the universe depends on what factors, size of the cube or amount of metadata? The customer is concerned regarding what is the guideline on how much time would this process take when the universe comes back with the classes and objects. If there is any such guideline, what is it?
Any response on this is appreciated.
Thanks,
Amit Banavalikar

I had similar problems, setting the "Connection timeout" on the SAP/BW connection within Designer (default 10 minutes) from 10 min. to 60 or 120. ALSO: uncheck the universe limits on "number of rows (5000)" and "query duration (10 min)".
This solved the problem.
The connection timeout which is set directly on the SAP-BW connection in designer seems to be used in a wrong way. The definition of the "close connection after xx minutes" means that the connction should be closed after xx minutes of not being used by any process.
With SAP BW the connection seems to be closed regardless of it's use after the specified time period.
regards,
Walter

Hardcoded LOV against SAP BW

Hello,
When using XI 3.1 against SAP BW what is the equivalent of
@Prompt('Rank By (Mandatory, Single)','A',{'MTD','QTD','YTD'},mono,constrained)
That is I want the LOV to display MTD, QTD and YTD.
The above syntax gives me the below error
A database error occured. The database error text is: The MDX query WITH MEMBER [Measures].[3A5C8F88-5138-DF11-A2,11,14,1E,A,CD,0,0] AS ' Net Sales ' MEMBER [Measures].[CE5E8F88-5138-DF11-A2,11,14,1E,A,CD,0,0] AS ' MTD ' SELECT { [Measures].[3A5C8F88-5138-DF11-A2,11,14,1E,A,CD,0,0], [Measures].[CE5E8F88-5138-DF11-A2,11,14,1E,A,CD,0,0] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( [0SOLD_TO].[LEVEL01].MEMBERS, [0SOLD_TO__0INDUSTRY].[LEVEL01].MEMBERS ), [0PLANT].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_CAPTION, [0PLANT].[10SALES_DIST], [0SOLD_TO].[10INDUSTRY] ON ROWS FROM [ZMCSLSAVP/ZZMCSLSAVP_Q0001] failed to execute with the error Invalid MDX command with Sales. (WIS 10901)
Thanks,
Nikhil
Edited by: Nikhil Khasnis on Mar 25, 2010 10:13 PM
To clarify
I am trying to use @Prompt('Rank By (Mandatory, Single)','A',{'MTD','QTD','YTD'},mono,constrained) in the select part of the MDX query.
I have a requirement to let the user select MTD, QTD or YTD and then do ranking on a WebI report based on what is selected. This would work in legacy DBs as the SQL would be like
Select column1, 'MTD' from table
Any work arounds in MDX?

AWESOME!!! You da man.
My complete syntax is
<EXPRESSION>
(@Prompt('Rank By (Mandatory, Single)','A:A',{'MTD Net Sales':'[Measures].[AVYY9P5M8DTA6AESXTMP443S6]','QTD Net Sales':'[Measures].[AY3OF147LRJYBGLD5HC7YFQXY]','YTD Net Sales':'[Measures].[B08EKD2SZ5AMGMRXD51QSRE3Q]','MTD Tot Rev':'[Measures].[ACSEXPI9VY58VQRR0W8ZJ7BC6]','QTD Tot Rev':'[Measures].[AEX531GV9BVX0WYB8JYIDIYHY]','YTD Tot Rev':'[Measures].[AH1V8DFGMPML634VG7O17ULNQ]','MTD Cust Markup':'[Measures].[BYC0XOGAX95CRDOWROE49XOO6]','QTD Cust Markup':'[Measures].[C0GR30EWAMW0WJVGZC3N49BTY]','YTD Cust Markup':'[Measures].[C2LH8CDHO0MP1Q216ZT5YKYZQ]','MTD Gross Profit':'[Measures].[BW7ASCHPJVEOM7ICK0OLFM1IE]','QTD Gross Profit':'[Measures].[BPT4CCLXFQ6O6OYNX1K0WN412]','YTD Gross Profit':'[Measures].[BJEXWCQ5BKYNR6EZA2FGDO6JQ]'},mono,primary_key),@Prompt('Dimensions?','A:A',{'Buss Unit':'[0SOLD_TO].currentmember','Historical group':'[ZBUY_GPO].currentmember','Fin Resp':'[ZCFINRESP].currentmember'},mono,primary_key) )
</EXPRESSION>
This is crazy thought for mere mortals like me to remember. Is there a good book or course or something on MDX or how to use it with BO?
Thanks,
Nikhil
Edited by: Nikhil Khasnis on Mar 29, 2010 6:08 PM
<EXPRESSION>
(@Prompt('Rank By (Mandatory, Single)','A:A',{'MTD Net Sales':'[Measures].[AVYY9P5M8DTA6AESXTMP443S6]','QTD Net Sales':'[Measures].[AY3OF147LRJYBGLD5HC7YFQXY]','YTD Net Sales':'[Measures].[B08EKD2SZ5AMGMRXD51QSRE3Q]','MTD Tot Rev':'[Measures].[ACSEXPI9VY58VQRR0W8ZJ7BC6]','QTD Tot Rev':'[Measures].[AEX531GV9BVX0WYB8JYIDIYHY]','YTD Tot Rev':'[Measures].[AH1V8DFGMPML634VG7O17ULNQ]','MTD Cust Markup':'[Measures].[BYC0XOGAX95CRDOWROE49XOO6]','QTD Cust Markup':'[Measures].[C0GR30EWAMW0WJVGZC3N49BTY]','YTD Cust Markup':'[Measures].[C2LH8CDHO0MP1Q216ZT5YKYZQ]','MTD Gross Profit':'[Measures].[BW7ASCHPJVEOM7ICK0OLFM1IE]','QTD Gross Profit':'[Measures].[BPT4CCLXFQ6O6OYNX1K0WN412]','YTD Gross Profit':'[Measures].[BJEXWCQ5BKYNR6EZA2FGDO6JQ]'},mono,primary_key),@Prompt('Dimensions?','A:A',{'Buss Unit':'[0SOLD_TO].currentmember','Historical group':'[ZBUY_GPO].currentmember','Fin Resp':'[ZCFINRESP].currentmember'},mono,primary_key) )
</EXPRESSION>

Can we do oracle 11g software installation in parallel to SAP upgrade

Hi Basis Expert,
I need your inputs for one of this query
The query is. Can we do oracle 11g software installation in parallel to SAP upgrade when the system is in Downtime phase.
The idea is running SAP upgrade and in parallel running oracle 11g software installation. So that we can reduced the time.
Please share your valuable inputs.
Regards,
Anil Shenoy.

yes, of course.
using different environment during the installation of the new engine, you could install the new oracle home 11 also tomorrow (including the SBP).
infact, before the ./RUNINSTALLER you have to set the environment
setenv ORACLE_HOME /oracle/SID/112_64
setenv ORACLE_HOME_SRC /oracle/SID/102_64
setenv ORACLE_HOME_TGT /oracle/SID/11202
setenv LIBPATH $ORACLE_HOME/lib:$LIBPATH
setenv PATH /oracle/SID/112_64/bin: $PATH

What are the roles & responsibilites of consultant in SAP upgradation or mi

Hello ,
Would you please any dody help me to provide the role & responsibilities of consultant in SAP upgradation or migration project.Thanks.
Regards,
Sampally

Hello,
If the project is of technical up gradation then with no functionality changed, Then the job of abap consultant is critical, right from creating spdd and spau, interfaces, debug the new programs and fix the bugs if exists in the new programs. The functional consultant has to test the new system from functions point of view; functional consultant is responsible for taking user acceptance test before going on live to the new system.
Regards,
Vivek

What are the most common/important DB firewall intrusion methods Security Admins need to protect against?

Hi everyone,
I was curious about the top methods attackers are using to breach Oracle DB firewalls. We are running Oracle 11.2.0.4 DB running on RedHat Linux 5.3 and using the standard IP tables/firewall for Linux turned on. We have all the ports closed that were recommended by our security auditing company. However, we just wanted to know if there were specific attack methods that are commonly being used which we should additionally protect against.
Thanks in advance for any info.

Anybody? Bueller? Bueller?

SCC4 - Protection against SAP upgrade

Similar Messages

Maybe you are looking for