SCCM 2007 & 2012

Hi everyone, I need a urgent support. In my organization we have sccm 2007 & 2012 environment. Both are not interconnected few clients connected to 2012 and rest in 2007. Person who handled this technology earlier has designed, i don't know the exact
reason. Now i am in a position to handle. My knowledge in sccm is basic. My organization is asked to check the status complete sccm servers & clients and give the complete report and progressive plan. Please guide me how to take the current severs &
client health status. 
2007 used for  - hardware inventory, Software meetering, deployments, wsus. - how are each roles are working condition no idea.
2012 used for - hardware inventory.
Please advice with step by step guide instruction for merging and henceforth to success SCCM in my organization.
Regards
Kumar

And do please start reading the guides at windows-noob here http://www.windows-noob.com/forums/index.php?/topic/4045-system-center-2012-configuration-manager-guides/
Step by Step Configuration Manager Guides >
2012 Guides |
2007 Guides | I'm on Twitter > ncbrady

Similar Messages

  • SCCM 2007-2012 migration job

    Hi,
    We have an empty SCCM 2012 R2 environment (only testmachines in it).
    Now I would like to migrate some first Windows 7 machines by pushing a SCCM 2012 client to it. Therefore first the collections and packages of SCCM 2007 should be migrated.
    So I started an SCCM 2012 Collection migration job from SCCM 2007 to 2012:
    1.Selected only the Windows 7 collections (only those should be migrated, not the XP ones)
    2.selected software assigned to it (it comes from a DFS-share \\ourcompany\share
    3.all with default values, except "Enable programs for deployment"
    My questions:
    1.It took only 10 minutes to complete (share is 100 GB) but I see now software is not distributed to distribution point.
    => Is that normal? Should I run distribute to distribution point for all packages are rerun migration job with differen values?
    2.After step 1, I can now migrate a Windows 7 computer fro SCCM 2007 to 2012, right?
    Everything looks fine to me. There is also the object migration but don't think I need it.Just want to doublecheck.
    Please advise.
    J.
    Jan Hoedt

    #1: that's default behavior. Packages are migrated, but not distributed to DPs automatically. That's up to you right now.
    #2: yes, but that's independent from step #1. You can install the CM12 client to the clients anytime.
    Torsten Meringer | http://www.mssccmfaq.de

  • How can I remove the SCCM 2012 client and reinstall SCCM 2007 client on all of our computers

    Hello All
    We have  bit of a problem. Our virtual SCCM 2012 r2 server was deleted and the back solution we had in place keeps failing.
    We do have our sccm 2007 server still in place but its only role was imaging as we transferred roles from one to another.
    My question is now our support needs to remote into pcs but cant because the CM12 server is gone. How can I remove the 2012 client from all of our companies computers and reinstall the CM07 client so we can remote into computers again.
    Thanks in advance!
    Phil
    Phil Balderos

    Run a ccmsetup /uninstall on the clients. You may need to run via PSExec. Then push out the SCCM 2007 client via the 2k7 console.
    Cheers
    Paul | sccmentor.wordpress.com
    Thanks Paul!
    I have to do this on over 350 computers and 110 servers. How can I do it on a more massive scale?
    Phil Balderos
    I would check Torsten's approach first and see if the ccmsetup will uninstall the 2012 version. I'm not sure. Obviously the other way round is fine.
    Using PSexec you can script this to call up a txt file of all your servers/computers and run the uninstall.
    e.g. 
    for /f "tokens=*" %a in (computers.txt) do psexec \\%a %WINDIR%\ccmsetup\ccmsetup.exe /uninstall 
    If your account has privileges on all devices you won't need to add in any username/password credentials. Obviously only devices that are switched on and you have access to will run this.
    Cheers
    Paul | sccmentor.wordpress.com

  • Help needed -- Considerations to be taken while migrating 2 different SCCM 2007 hierarchies into a single SCCM 2012 Hierarchy.

    Hi, I need your help on consolidating two different SCCM 2007 infrastructures into a single SCCM 2012.
    We have two different SCCM 2007 Hierarchies, Lets say 123 and ABC
    About 123 SCCM 2007 -- On 123 Hierarchy, we have already started migrating clients from SCCM 2007 to SCCM 2012.
    About ABC SCCM 2007 -- On ABC Hierarchy, This is still running on SCCM 2007 (This hierarchy only be started migrating once                                      we
    are completed migration on 123)
    Out of which, we have few co located offices across the globe for both 123 and ABC. Now we are decided to replace the hardware on all these locations by removing the existing two servers (one for 123 and other for ABC,with two different Forest and domains),
    and consolidate them into a single server.how can we plan/design to ensure that we covering both hierarchies SCCM clients for the operations.
    ===================Below are some possibilities we are discussing on================================
    1.Is there any way on "System management" in AD to enable access either in 123's domain or ABC's domain.
    2.Since we are planning to replace the hardware with Server 2012 R2 with Hyper-V, Create two instances and migrate 123 hierarchy to SCCM 2012 and other instance will serve ABC until we start the migration on this.
    ========================================================================================
    correct me, If i am in wrong direction. Please suggest me the best of doing it. Thanks in advance.
    srkr

    1) In CM 2012 you can publish data to System Management in other forest but you have to configure the permissions manually and create the forest object in the ConfigMgr console.
    2) CM07 and CM2012 instances can co-exist as long as you don't create boundary groups in CM12 for site assignment (that will cause overlapping boundaries if you still have boundaries in Cm07)
    Kent Agerlund | My blogs: blog.coretech.dk and
    SCUG.DK | Twitter: @Agerlund | Linkedin:
    Kent Agerlund

  • SCCM 2007 and 2012 coexistence and Cross Forest support

    Hi All
    I have a question
    My company has recently acquired another company
    That company exist of 2 forests (forest A has one domain namely domain A : and forest B has one domain namely domain B) with a two way forest trusts between them
    Domain A has a SCCM 2007 primary Site
    Domain B has a SCCM 2007 primary site and 2 secondary Sites
    The active directory schema is extended in both domains
    We cannot migrate the SCCM 2007 environment because it is a mess , so we want to build a new SCCM 2012 R2 environment into Domain B and from that environment manage both domains  (OSD, software deployment client management ...)
    We want to install a SCCM 2012 R2 (CU3) primary server into domain B and add two distribution points instead of the two secondary sites and manage both forests (domain A and B) from that primary site server
    Now my questions are
    1 )
    Can an SCCM 2007 environment coexist with a SCCM 2012 environment?
    I believe it can If I make sure that in the new SCCM 2012 environment we only use boundary groups for content locations and not for site assignment and in the SCCM 2007 environment (domain A and domain B) I need to disable the client push account.
    2)
    Discovery , How do we make sure that systems and users are discovered from both domains?
    Do we need to do some additional configuration to make that happen or will this be no problem because of the Two way trust and active directory schema extension.
    3 )
    Can we do all the management from the new SCCM 2012 R2 site , also OSD deployments for both domains ?
    I hope someone can help me with these questions
    Thanks in advance
    Regards
    Johan

    Hi All
    After talk with management and local support the decision is made not to deploy only distribution points but instead deploy secondary sites (of course with management point and distribution point) because the bandwidth to these sites is a
    problem.
    So the situation will be Domain A Primary site (SCCM 2012 R2) and for both remote locations a secondary site , domain B a secondary site (of course all the related ports need to be opened for both domains as explained here https://technet.microsoft.com/en-us/library/hh427328.aspx
    Question 
    Can we do all the management from the new primary SCCM 2012 R2 site (domain A) , also OSD deployments for both domains A and B ?
    I hope someone can review this
    Thx in advance
    Regards Johan

  • SCCM 2012 Client delpoyment in SCCM 2007 Native world

    Hi Team,
    In my account I have SCCM 2007 running in Native mode.... we do not support internet based clients there..but work on HTTPS only. Now I have implemented SCCM 2012 R2 there and now testing the client migration so that I can upgrade the SCCM client agent from
    2007 to 2012. In SCCM 2012 we have to support internet based clients and so the SCCM 2012 client which we need to install should be compatible on internet and intranet both
    The plan is to use the existing SCCM 2007 infra to do that. Send the ccmsetup.exe ( of SCCM 2012 ) in a package to all the clients via SCCM 2007 Software Distribution and trigger SCCM 2012 installation.
    Just to do a small test I did this :
    1. Created a folder in C drive of a client machine and copied the ccmsetup.exe ( of SCCM 2012 ) in it.
    2. Tried to trigger the installation with below mentioned commandlines..... but getting error as mentioned below.... Please help.
    Command line used : 
    Here ABCD.contoso.org is the intranet MP and PQRS.dmzone.org is internet MP
    CCMSetup.exe /UsePKICert /NoCRLCheck smsmp=ABCD.contoso.org ccmhostname=PQRS.dmzone.org smssitecode=ABC
    CCMSetup.exe /UsePKICert /NoCRLCheck smsmp=ABCD.contoso.org smssitecode=ABC
    CCMSetup.exe smsmp=ABCD.contoso.org smssitecode=ABC
    Error in ccmsetup.log
    <![LOG[==========[ ccmsetup started in process 3068 ]==========]LOG]!><time="12:49:12.547+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="5076" file="ccmsetup.cpp:9441">
    <![LOG[Running on platform X64]LOG]!><time="12:49:12.548+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="5076" file="util.cpp:1892">
    <![LOG[Updated security on object C:\Windows\ccmsetup\cache\.]LOG]!><time="12:49:12.548+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="5076" file="ccmsetup.cpp:9285">
    <![LOG[Launch from folder C:\Windows\ccmsetup\]LOG]!><time="12:49:12.548+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="5076" file="ccmsetup.cpp:721">
    <![LOG[CcmSetup version: 5.0.7958.1401]LOG]!><time="12:49:12.549+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="5076" file="ccmsetup.cpp:727">
    <![LOG[Successfully started the ccmsetup service]LOG]!><time="12:49:12.550+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="4744" file="ccmsetup.cpp:3271">
    <![LOG[Deleted file C:\Windows\ccmsetup\ccmsetup.exe.download]LOG]!><time="12:49:12.551+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="4744" file="ccmsetup.cpp:9497">
    <![LOG[In ServiceMain]LOG]!><time="12:49:12.552+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmsetup.cpp:3365">
    <![LOG[Folder 'MicABCoft\Configuration Manager' not found. Task does not exist.]LOG]!><time="12:49:12.556+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="4744"
    file="wintask.cpp:622">
    <![LOG[CcmSetup is exiting with return code 0]LOG]!><time="12:49:12.556+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="4744" file="ccmsetup.cpp:10879">
    <![LOG[Running on 'MicABCoft Windows 7 Enterprise ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18]LOG]!><time="12:49:12.618+300" date="11-11-2014" component="ccmsetup" context="" type="1"
    thread="3284" file="util.cpp:1974">
    <![LOG[Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/UsePKICert" "/NoCRLCheck" "smssitecode=ABC"]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup"
    context="" type="1" thread="3284" file="ccmsetup.cpp:3590">
    <![LOG[Command line parameters for ccmsetup have been specified.  No registry lookup for command line parameters is required.]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context=""
    type="1" thread="3284" file="ccmsetup.cpp:3775">
    <![LOG[Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/UsePKICert" "/NoCRLCheck" "smssitecode=ABC"]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup"
    context="" type="1" thread="3284" file="ccmsetup.cpp:3776">
    <![LOG[SslState value: 448]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmsetup.cpp:4425">
    <![LOG[CCMHTTPPORT:    80]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8621">
    <![LOG[CCMHTTPSPORT:    443]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8636">
    <![LOG[CCMHTTPSSTATE:    448]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8654">
    <![LOG[CCMHTTPSCERTNAME:    ]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8672">
    <![LOG[FSP:    ]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8724">
    <![LOG[CCMFIRSTCERT:    1]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8782">
    <![LOG[HTTPS is enforced for Client. The current state is 31.]LOG]!><time="12:49:12.621+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmutillib.cpp:403">
    <![LOG[Begin searching client certificates based on Certificate Issuers]LOG]!><time="12:49:12.623+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmcert.cpp:4393">
    <![LOG[Completed searching client certificates based on Certificate Issuers]LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmcert.cpp:4550">
    <![LOG[Begin to select client certificate]LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmcert.cpp:4706">
    <![LOG[The 'Certificate Selection Criteria' was not specified, counting number of certificates present in 'MY' store of 'Local Computer'.]LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context=""
    type="0" thread="3284" file="ccmcert.cpp:4742">
    <![LOG[1 certificate(s) found in the 'MY' certificate store.]LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmcert.cpp:4770">
    <![LOG[Only one certificate present in the certificate store.]LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmcert.cpp:4774">
    <![LOG[Begin validation of Certificate [Thumbprint 50051EB74624621341900739D65706D8089A0941] issued to 'D-LJACKNVM7X64.ABClan.org']LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context=""
    type="1" thread="3284" file="ccmcert.cpp:1662">
    <![LOG[Failed to get certificate key provider information. Error 0x80092004]LOG]!><time="12:49:12.626+300" date="11-11-2014" component="ccmsetup" context="" type="3" thread="3284" file="ccmcert.cpp:1199">
    <![LOG[The Certificate [Thumbprint 50051EB74624621341900739D65706D8089A0941] issued to 'D-LJACKNVM7X64.ABClan.org' has 'Client Authentication' capability.]LOG]!><time="12:49:12.633+300" date="11-11-2014" component="ccmsetup"
    context="" type="0" thread="3284" file="ccmcert.cpp:582">
    <![LOG[Completed validation of Certificate [Thumbprint 50051EB74624621341900739D65706D8089A0941] issued to 'D-LJACKNVM7X64.ABClan.org']LOG]!><time="12:49:12.633+300" date="11-11-2014" component="ccmsetup" context=""
    type="1" thread="3284" file="ccmcert.cpp:1803">
    <![LOG[>>> Client selected the PKI Certificate [Thumbprint 50051EB74624621341900739D65706D8089A0941] issued to 'D-LJACKNVM7X64.ABClan.org']LOG]!><time="12:49:12.633+300" date="11-11-2014" component="ccmsetup"
    context="" type="1" thread="3284" file="ccmcert.cpp:4850">
    <![LOG[Raising event:
    instance of CCM_ServiceHost_CertRetrieval_Status
    ClientID = "GUID:A5879665-7A1B-4529-827E-52FA34ABD384";
    DateTime = "20141111174912.640000+000";
    HRESULT = "0x00000000";
    ProcessID = 3068;
    ThreadID = 3284;
    ]LOG]!><time="12:49:12.640+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="event.cpp:715">
    <![LOG[Failed to submit event to the Status Agent. Attempting to create pending event.]LOG]!><time="12:49:12.643+300" date="11-11-2014" component="ccmsetup" context="" type="2" thread="3284"
    file="event.cpp:737">
    <![LOG[Raising pending event:
    instance of CCM_ServiceHost_CertRetrieval_Status
    ClientID = "GUID:A5879665-7A1B-4529-827E-52FA34ABD384";
    DateTime = "20141111174912.640000+000";
    HRESULT = "0x00000000";
    ProcessID = 3068;
    ThreadID = 3284;
    ]LOG]!><time="12:49:12.643+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="event.cpp:770">
    <![LOG[Successfully submitted pending event to WMI.]LOG]!><time="12:49:12.648+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="event.cpp:813">
    <![LOG[CCMCERTID:    MY;50051EB74624621341900739D65706D8089A0941]LOG]!><time="12:49:12.649+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmsetup.cpp:8803">
    <![LOG[No MP or source location has been explicitly specified.  Trying to discover a valid content location...]LOG]!><time="12:49:12.649+300" date="11-11-2014" component="ccmsetup" context="" type="1"
    thread="3284" file="ccmsetup.cpp:4729">
    <![LOG[Looking for MPs from AD...]LOG]!><time="12:49:12.649+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:4737">
    <![LOG[Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=ABC))']LOG]!><time="12:49:13.226+300" date="11-11-2014" component="ccmsetup" context="" type="0"
    thread="3284" file="lsad.cpp:657">
    <![LOG[OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>ABC</RootSiteCode><CCM>
    <CommandLine>SMSSITECODE=ABC</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain
    Value="ABClan.org" /><Forest Value="ABCroot.org" /></ClientOperationalSettings>']LOG]!><time="12:49:13.378+300" date="11-11-2014" component="ccmsetup" context="" type="0"
    thread="3284" file="lsadcache.cpp:236">
    <![LOG[The MP name retrieved is 'ABCD.contoso.org' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>']LOG]!><time="12:49:13.381+300"
    date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="lsadcache.cpp:334">
    <![LOG[MP 'ABCD.contoso.org' is not compatible]LOG]!><time="12:49:13.382+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="lsadcache.cpp:345">
    <![LOG[Retrieved 0 MP records from AD for site 'ABC']LOG]!><time="12:49:13.382+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="lsadcache.cpp:287">
    <![LOG[FromAD: command line = SMSSITECODE=ABC]LOG]!><time="12:49:13.383+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmsetup.cpp:288">
    <![LOG[Local Machine is joined to an AD domain]LOG]!><time="12:49:13.383+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="lsad.cpp:715">
    <![LOG[Current AD forest name is ABCroot.org, domain name is ABClan.org]LOG]!><time="12:49:13.386+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="lsad.cpp:843">
    <![LOG[Domain joined client is in Intranet]LOG]!><time="12:49:13.386+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="lsad.cpp:1048">
    <![LOG[CMPInfoFromADCache requests are throttled for 01:07:08]LOG]!><time="12:49:13.386+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="lsadcache.cpp:173">
    <![LOG[No valid source or MP locations could be identified to download content from. Ccmsetup.exe cannot continue.]LOG]!><time="12:49:13.386+300" date="11-11-2014" component="ccmsetup" context="" type="3"
    thread="3284" file="ccmsetup.cpp:4806">
    <![LOG[Failed to parse '"C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/UsePKICert" "/NoCRLCheck" "smssitecode=ABC"' with error 0x80004005]LOG]!><time="12:49:13.386+300" date="11-11-2014"
    component="ccmsetup" context="" type="3" thread="3284" file="ccmsetup.cpp:4611">
    <![LOG[A Fallback Status Point has not been specified.  Message with STATEID='100' will not be sent.]LOG]!><time="12:49:13.386+300" date="11-11-2014" component="ccmsetup" context="" type="1"
    thread="3284" file="ccmsetup.cpp:9767">
    <![LOG[A Fallback Status Point has not been specified.  Message with STATEID='307' will not be sent.]LOG]!><time="12:49:13.387+300" date="11-11-2014" component="ccmsetup" context="" type="1"
    thread="3284" file="ccmsetup.cpp:9767">
    <![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="12:49:13.388+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="5076" file="ccmsetup.cpp:10883">

    Hi Jason,
    Thanks for your reply..... I tried with /mp switch.... but same error.... if you look at the logs it says 
    <![LOG[MP 'ABCD.contoso.org' is not compatible]LOG]!><time="12:49:13.382+300"
    date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="lsadcache.cpp:345">
    <![LOG[Retrieved 0 MP records from AD for site 'ABC']LOG]!>
    Not sure why it is saying " not compatible " ... its a valid MP..... from the same client machine below links are working fine..
    http://ABCD.contoso.org/sms_mp/.sms_aut?mpcert
    http://ABCD.contoso.org/sms_mp/.sms_aut?mplist
    Thanks,
    Sam

  • Can I use SCCM 2007 to deploy SCCM 2012 Agent

    I was reading the scenarios for deploying the SCCM 2012 agent here
    http://technet.microsoft.com/en-us/library/gg682132.aspx
    I have been planning to deploy the 2012 agent using an SCCM 2007 deployment package. I am not migrating any data/packages/collections/anything from SCCM 2007. 
    I am looking for a sane way to deploy 2000ish clients a day for 2 weeks and be done. 
    I figure they are all SCCM 2007 clients so lets deploy 2012 agent using SCCM 2007.
    I read the following in the link above and it sounds like the way I want to go – use SCCM 2007 software distribution…
    Upgrade installation by using application management
    Upgrades clients to a newer version by using Configuration   Manager application management. You can also use Configuration Manager 2007 software  
    distribution to upgrade clients to System Center 2012 Configuration Manager.
    Then later in the same document there is this…
    How to Upgrade Configuration Manager Clients by Using a Package and Program
    You can use Configuration Manager to create and deploy a package and program that upgrades the client software for selected computers in your hierarchy. A package definition file
    is supplied with Configuration Manager that populates the package properties with typically used values. You can customize the behavior of the client installation by specifying additional command line properties.
    You cannot upgrade Configuration Manager 2007 clients to System Center 2012 Configuration Manager by using this method.
    In this scenario, use automatic client upgrade, which automatically creates and deploys a package that contains the latest version of the client.
    What???!??  There is no Automatic client upgrade feature in 2007 – so how does that even make sense?  In one section, it says I can deploy the 2012 Agent using SCCM 2007 software distribution, and then later in the same document, it
    says I can't.  I am probably misunderstanding somthing.
    Is it possible to make a package/program in SCCM 2007 that will make targeted clients upgrade to Agent 2012 and join the new SCCM 2012 Site?

    I tested this (deploying 2012 agent using existing 2007 SCCM infrastructure) with a few test systems at my desk and it seems to work pretty smoothly.  I made a package to deploy SCCM 2012 SP1 and added it to my SCCM 2007 Site.  Then I deployed
    the 2012 agent from 2007 and it worked great.  If it works this well in production, I will be able to migrate all of my clients in less than a weeks time. 
    I have not published the 2012 site information in AD - and I don't plan to.  We would have some overlapping site boundaries - and in 2012 it seems its unnecessary in a single site hierarchy.  I AM planning to use boundaries to assign
    DPs, but thankfully site and DP boundaries have been separated.  It works great to just specify the site in everything and not worry about auto discovery.  My clients don't move among sites since I only have one large site.
    Sorry that I somehow posted this same question twice, and thanks for cleaning that up.
     In my installation, I just called ccmsetup.exe with the following command line...
     /mp:myMP.mydomain.com CCMLOGMAXHISTORY=5 CCMLOGMAXSIZE=1000000 SMSCACHEFLAGS=PERCENTDISKSPACE;NTFSONLY SMSCACHESIZE=10 SMSMP=myMP.mydomain.com SMSSITECODE=CCM
    I am not sure that I need to specify the MP twice, but it is working to do so.  I'm also not sure whether the log and cache flags will be honored since there are existing settings from SCCM2007 agent.  I think that the 2012 install will not change
    these settings upon installation, but it does not appear to hurt the process to include them just in case it does work.

  • Software Distribution & Patching Design Issues - Migration of Packages SCCM 2007 to Application or Conventional Packages in SCCM 2012

    Hi All
    I am starting in discussion to deep root on Software Distribution & Patching model in large environments from SCCM 2007 migrating to SCCM 2012.
    Below are certain assertions i am putting forward for your expert views or you may in a similar situation
    1- I have migrated the packages from SCCM 2007 to SCCM 2012 as conventional methods, now i am deploying them [ not migrated the advertisements and collections ], so while deploying i am facing a peculiar situation that the deployment when created is of the
    name "<<Package name>>(program)". I am not able to rename the deployment for the conventional packages. is there a way out to that??
    2- Will the collection queries work the same in SCCM 2012 as was in SCCM 2007??
    3- In SCCM 2012 Primary site there is default role called Site System role in that there is tab for proxy settings. I have observed that if do not check the proxy tab there and punch in proxy IP and port then after some time in the WSUS server the update
    source and proxy server tab the proxy option gets unchecked and hence the sync in software update point status appears failed. Is that anyone else also has observed !!!!!
    Regards Sushain KApoor

    This is a duplicate of
    https://social.technet.microsoft.com/Forums/en-US/2ddb8170-529b-4652-830e-fd0ade384b98/software-distribution-patching?forum=configmanagermigration
    Please do not double post.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • SCCM 2007 to 2012 R2 Migration Data Gathering Error: RPC

    Hi Guys,
    I am doing Migration from SCCM 2007 to 2012 R2. Facing a RPC connection Error.
    Following is the details from Migmcctrl.log
    [MigMCtrl]:    Migration Manager has received a new job request
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    4648 (0x1228)
    Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    4648 (0x1228)
    [MigrationManager]: Start two step scheduling for MIG_SiteMapping
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    4648 (0x1228)
    [MigrationManager]:         Step 1. Query the schedule items that was running or requested to start immediately ...
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    4648 (0x1228)
                                                                    [Worker]: Start processing status
    changed event for MIG_SiteMapping.ID=16777236
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    5024 (0x13A0)
                                                                    [Worker]:        
    Set the schedule item 16777236 start time SMS_MIGRATION_MANAGER
    19-03-2014 02:21:57 5024 (0x13A0)
                                                                    [Worker]:        
    Set the schedule item 16777236 status to Running
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    5024 (0x13A0)
                                                                    [Worker]: End processing status changed
    event for MIG_SiteMapping.ID=16777236 SMS_MIGRATION_MANAGER
    19-03-2014 02:21:57 5024 (0x13A0)
                                                                    [Worker]: ==================== Sync
    Agent Job 16777236 Started ====================
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    5024 (0x13A0)
    [MigrationManager]:         Step 2. Query the first item in order of DateNextRun ...
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    4648 (0x1228)
    [MigrationManager]:                 No item found. Sleep until the next event.
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    4648 (0x1228)
    [MigrationManager]: End two step scheduling for MIG_SiteMapping
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    4648 (0x1228)
    Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    4648 (0x1228)
    [MigrationManager]: Start two step scheduling for MIG_Job
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    4648 (0x1228)
    [MigrationManager]:         Step 1. Query the schedule items that was running or requested to start immediately ...
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    4648 (0x1228)
    [MigrationManager]:         Step 2. Query the first item in order of DateNextRun ...
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    4648 (0x1228)
    [MigrationManager]:                 No item found. Sleep until the next event.
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    4648 (0x1228)
    [MigrationManager]: End two step scheduling for MIG_Job
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    4648 (0x1228)
    [MigMCtrl]: the workitem queue is full! SMS_MIGRATION_MANAGER
    19-03-2014 02:21:57 4648 (0x1228)
    [MigMCtrl]: WAIT 3 event(s) for 60 minute(s) and 0 second(s).
    SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
    4648 (0x1228)
                                                                    [Worker]:        
    ========== Start prerequisite checking ==========
    SMS_MIGRATION_MANAGER 19-03-2014 02:22:05
    5024 (0x13A0)
                                                                    [Worker]:        
            Validating source site for central site ...
    SMS_MIGRATION_MANAGER 19-03-2014 02:22:05
    5024 (0x13A0)
                                                                    [Worker]:        
    ========== End prerequisite checking ==========
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    5024 (0x13A0)
                                                                    [Worker]: ==================== Sync
    Agent Job 16777236 Ended ====================
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    5024 (0x13A0)
                                                                    ERROR: [Worker]: System.Runtime.InteropServices.COMException
    (0x800706BE): The remote procedure call failed. (Exception from HRESULT: 0x800706BE)     at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)     at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
        at Microsoft.ConfigurationManagement.SoftwareLibrary.ObjectSerialization.Adapters.WmiObjectManager.GetObjects(ObjectSearchCriteria criteria)     at Microsoft.ConfigurationManagement.SoftwareLibrary.ObjectSerialization.Adapters.WmiObjectManager.TryGetInstance(ObjectKey
    objKey)     at Microsoft.ConfigurationManagement.SoftwareLibrary.ObjectSerialization.ObjectManager.GetInstance(ObjectKey objKey, LibraryContext context)     at Microsoft.ConfigurationManagement.SoftwareLibrary.ObjectSerialization.Library.Get[T](Expression`1
    key)     at Microsoft.ConfigurationManagement.MigrationManager.SyncAgentJob.<get_ExecutionPlan>d__7.MoveNext()     at Microsoft.ConfigurationManagement.MigrationManager.Job`1.ExecuteNext()
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    5024 (0x13A0)
                                                                    [Worker]: Start processing status
    changed event for MIG_SiteMapping.ID=16777236
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    5024 (0x13A0)
                                                                    [Worker]:        
    Set the schedule item 16777236 end time SMS_MIGRATION_MANAGER
    19-03-2014 02:34:55 5024 (0x13A0)
                                                                    [Worker]:      
      Set the schedule item 16777236 status to Failed
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    5024 (0x13A0)
                                                                    [Worker]: End processing status changed
    event for MIG_SiteMapping.ID=16777236 SMS_MIGRATION_MANAGER
    19-03-2014 02:34:55 5024 (0x13A0)
                                                                    [Worker]: Disposing Job 16777236
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    5024 (0x13A0)
                                                                    [Worker]: Removing Job 16777236 from
    job manager. SMS_MIGRATION_MANAGER
    19-03-2014 02:34:55 5024 (0x13A0)
                                                                    [Worker]: Removing the Job with Id
    16777236. SMS_MIGRATION_MANAGER
    19-03-2014 02:34:55 5024 (0x13A0)
                                                                    [Worker]: Disposing worker
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    5024 (0x13A0)
                                                                    [Worker]: Disposing current site
    connection SMS_MIGRATION_MANAGER
    19-03-2014 02:34:55 5024 (0x13A0)
    ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = The remote procedure call failed., 800706be
    SMS_MIGRATION_MANAGER
    19-03-2014 02:34:55 5024 (0x13A0)
    ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = The remote procedure call failed., 800706be
    SMS_MIGRATION_MANAGER
    19-03-2014 02:34:55 5024 (0x13A0)
    Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    4648 (0x1228)
    [MigrationManager]: Start two step scheduling for MIG_SiteMapping
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    4648 (0x1228)
    [MigrationManager]:         Step 1. Query the schedule items that was running or requested to start immediately ...
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    4648 (0x1228)
    [MigrationManager]:         Step 2. Query the first item in order of DateNextRun ...
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    4648 (0x1228)
    [MigrationManager]:                 The item MIG_SiteMapping 16777236 is scheduled to run at 03/19/2014 13:21:36 UTC, 03/19/2014 18:51:36 Local Time, sleep for 03:46:40.4440000.
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    4648 (0x1228)
    [MigrationManager]: End two step scheduling for MIG_SiteMapping
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    4648 (0x1228)
    Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    4648 (0x1228)
    [MigrationManager]: Start two step scheduling for MIG_Job
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    4648 (0x1228)
    [MigrationManager]:         Step 1. Query the schedule items that was running or requested to start immediately ...
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    4648 (0x1228)
    [MigrationManager]:         Step 2. Query the first item in order of DateNextRun ...
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    4648 (0x1228)
    [MigrationManager]:                 No item found. Sleep until the next event.
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    4648 (0x1228)
    [MigrationManager]: End two step scheduling for MIG_Job
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    4648 (0x1228)
    [MigMCtrl]: the workitem queue is full! SMS_MIGRATION_MANAGER
    19-03-2014 02:34:55 4648 (0x1228)
    [MigMCtrl]: NOTIFY job manager ( 1, 0, C:\Program Files\Microsoft Configuration Manager\inboxes\mmctrl.box\16777236.SYN ).
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    4648 (0x1228)
    Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    4648 (0x1228)
    [MigrationManager]: Start processing schedule changed event for MIG_SiteMapping.ID=16777236
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
    4648 (0x1228)
    [MigrationManager]:         Update the DateNextRun of the schedule item MIG_SiteMapping.ID=16777236
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
    4648 (0x1228)
    [MigrationManager]:         Calculating the next run time ...
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
    4648 (0x1228)
    [MigrationManager]:                 This is a recurring schedule token.
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
    4648 (0x1228)
    [MigrationManager]:                 This item already run at 03/19/2014 09:21:57 UTC, 03/19/2014 14:51:57 Local Time, the next run time is 03/19/2014 13:21:57 UTC, 03/19/2014 18:51:57 Local Time.
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
    4648 (0x1228)
    [MigrationManager]:         Check requested operation for schedule item MIG_SiteMapping.ID=16777236
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
    4648 (0x1228)
    [MigrationManager]: End processing schedule changed event for MIG_SiteMapping.ID=16777236
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
    4648 (0x1228)
    [MigMCtrl]: EVENT raised ( 1, 0, C:\Program Files\Microsoft Configuration Manager\inboxes\mmctrl.box\16777236.SYN ).
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
    4648 (0x1228)
    [MigMCtrl]: 1 instruction file processed. SMS_MIGRATION_MANAGER
    19-03-2014 02:34:56 4648 (0x1228)
    [MigMCtrl]: WAIT 3 event(s) for 60 minute(s) and 0 second(s).
    SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
    4648 (0x1228)
    help me out please.
    Thanks

    Hi Guys ,I figured out the issue.
    It was the boundary in SCCM 2007.Actually my SCCM 2007 and SCCM 2012 server were accessing the same Active Directory Site-(Default First Site Name). 
    I deleted the boundary and every thing went well.
    So thing is SCCM 2007 and SCCM 2012 should not fall under same active directory Site.
    Cheers

  • Distribution-Point sharing (SCCM 2007 - SCCM 2012)

    I've some problems by gathering data from a SCCM 2007 Hierarchy, into the SCCM 2012 environment.
    Gathering Data without enable Distribution Point sharing is successful, enabling Distribution Point Sharing the Process always fail.
    In migmctrl.log i recogniced that the process alway stucks on the following Row for about one hour:
     [Worker]:                                 Query against Legacy Site , @SourceSiteCode=KR1,
    @LastID=KR10001B:                       WITH Block AS                     
    (                          SELECT TOP 2500 ID FROM PkgStatus WHERE ID > @LastID ORDER BY ID                     
    )                      SELECT                         
    ps.ID COLLATE SQL_Latin1_General_CP1_CI_AS AS ID,                          ps.Type AS Type,                         
    ps.SiteCode COLLATE SQL_Latin1_General_CP1_CI_AS AS SiteCode,                          ps.PkgServer COLLATE SQL_Latin1_General_CP1_CI_AS
    AS PkgServer,                          ps.Personality AS Personality,                         
    ps.Status AS Status,                          ps.SourceVersion AS SourceVersion,                         
    ps.UpdateTime AS UpdateTime,                          ps.Location COLLATE SQL_Latin1_General_CP1_CI_AS AS Location,                         
    ps.SigLocation COLLATE SQL_Latin1_General_CP1_CI_AS AS SigLocation,                          ps.ShareName COLLATE SQL_Latin1_General_CP1_CI_AS
    AS ShareName,                          ps.HTTPUrl COLLATE SQL_Latin1_General_CP1_CI_AS AS HTTPUrl,                         
    ps.State AS State,                          ps.SigURL COLLATE SQL_Latin1_General_CP1_CI_AS AS SigURL                      
    FROM dbo.PkgStatus ps                      JOIN (                         
    SELECT d.ThisSiteCode COLLATE SQL_Latin1_General_CP1_CI_AS AS SiteCode FROM SMSData d                           UNION ALL                         
    SELECT s.SiteCode FROM Sites s JOIN SMSData d ON s.ReportToSite = d.ThisSiteCode AND s.SiteType = 1) s2                      ON s2.SiteCode = ps.SiteCode                     
    JOIN DistributionPoints dp ON ps.SiteCode = dp.SMSSiteCode                          AND ps.PkgServer = dp.NALPath collate SQL_Latin1_General_CP1_CI_AS                     
    WHERE ps.Type != 1 AND dp.Action != 3                          AND ps.ID > @LastID                         
    AND ps.ID <= (SELECT MAX(ID) FROM Block)
    And after that this Errormessage appear:
    ERROR: [Worker]:                                 Failed to execute:                      
    WHILE (1 = 1)                      BEGIN                         
    MERGE TOP (1000) PkgStatus AS target                          USING   (                             
    SELECT                                ps.ID, ps.Type, SiteCode = @CurrentSiteCode, PkgServer = dps.PkgServerFQDN,
    ps.Personality, ps.Status, ps.SourceVersion, ps.UpdateTime,                                ps.Location,
    ps.SigLocation, ps.ShareName, ps.HTTPUrl, ps.State, ps.SigURL, SiteCode as SourceSiteCode                             
    FROM #MIG_PkgStatus ps                              JOIN #MIG_DistributionPointSource dps ON ps.PkgServer = dps.PkgServer                             
    WHERE ID in (SELECT PkgID collate SQL_Latin1_General_CP1_CI_AS from dbo.SMSPackages_L)                             )
    AS src                          ON                           
    (target.ID = src.ID AND target.Type = src.Type AND target.SiteCode = src.SiteCode AND target.PkgServer = src.PkgServer AND target.Personality = src.Personality) -- TODO: Ensure we match an index                         
    WHEN NOT MATCHED THEN                              INSERT  (ID, Type, SiteCode, PkgServer, Personality, Status,
    SourceVersion, UpdateTime,                                      Location,
    SigLocation, ShareName, HTTPUrl, State, SigURL)                              VALUES (src.ID, src.Type, src.SiteCode,
    src.PkgServer, src.Personality, src.Status, src.SourceVersion, src.UpdateTime,                                     
    src.Location, src.SigLocation, src.ShareName, src.HTTPUrl, src.State, src.SigURL)                          WHEN MATCHED AND (                             
    target.Status != src.Status                              OR target.SourceVersion != src.SourceVersion                             
    OR target.UpdateTime != src.UpdateTime                              OR target.Location != src.Location                             
    OR target.SigLocation != src.SigLocation                              OR target.ShareName != src.ShareName                             
    OR target.HTTPUrl != src.HTTPUrl                              OR target.State != src.State                             
    OR target.SigURL != src.SigURL                              ) THEN                             
    UPDATE SET                                  target.Status = src.Status,                                 
    target.SourceVersion = src.SourceVersion,                                  target.UpdateTime
    = src.UpdateTime,                                  target.Location = src.Location,                                 
    target.SigLocation = src.SigLocation,                                  target.ShareName = src.ShareName,                                 
    target.HTTPUrl = src.HTTPUrl,                                  target.State = src.State,                                 
    target.SigURL = src.SigURL                          WHEN NOT MATCHED BY SOURCE AND EXISTS(                                 
    SELECT * FROM MIG_Entity me WHERE me.Type = 2 AND me.ObjectKey = target.ID)                              AND EXISTS
    (                                  SELECT * FROM MIG_DistributionPointSource dpsrc                                 
    WHERE dpsrc.PkgServerFQDN = target.PkgServer AND dpsrc.SourceSiteCode = @SourceSiteCode                             
    )                              AND NOT EXISTS (                                 
    SELECT * FROM MIG_Job job                                  WHERE Type = 3 AND dbo.fn_GetNALPathFromMIGJobConfiguration(job.AdditionalConfiguration)
    = target.PkgServer                              )                             
    THEN DELETE ;                            IF @@ROWCOUNT = 0 BREAK                     
    END SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]:                 End syncing Distribution Points related tables. SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]:         ========== End syncing distribution points ========== SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    ERROR: [Worker]:         System.Data.SqlClient.SqlException: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.     at System.Data.SqlClient.SqlConnection.OnError(SqlException
    exception, Boolean breakConnection)     at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler,
    SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)    
    at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior
    runBehavior, Boolean returnStream, String method, DbAsyncResult result)     at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)     at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()    
    at Microsoft.ConfigurationManagement.MigrationManager.MigrationRepository.BulkCopyData[T](Snapshot snapshot, LegacyRepository legacyRepository, IntlSqlFormatter formatter, Func`2 watermarkFunc, T lastMaxId, Boolean doNotDrop)     at Microsoft.ConfigurationManagement.MigrationManager.MigrationRepository.BulkCopyData[T](Snapshot
    snapshot, LegacyRepository legacyRepository, IntlSqlFormatter formatter, Func`2 watermarkFunc, T lastMaxId)     at Microsoft.ConfigurationManagement.MigrationManager.SyncAgentJob.<SyncDPSettings>d__5f.MoveNext()    
    at Microsoft.ConfigurationManagement.MigrationManager.ExtensionMethods.<AttachErrorHandler>d__6`1.MoveNext() SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    STATMSG: ID=8610 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_MIGRATION_MANAGER" SYS="<SourceSITESERVER>" SITE=CA1 PID=2348 TID=4516 GMTDATE=Do Nov 07 11:28:33.390 2013 ISTR0=""<SourceSITESERVER>" (CA1)"
    ISTR1="<DestinationSITESERVER>" ISTR2="-2146232060" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33
    4516 (0x11A4)
    STATMSG: ID=8605 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_MIGRATION_MANAGER" SYS="<SourceSITESERVER>" SITE=CA1 PID=2348 TID=4516 GMTDATE=Do Nov 07 11:28:33.416 2013 ISTR0=""<SourceSITESERVER>" (CA1)"
    ISTR1="<DestinationSITESERVER>" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516
    (0x11A4)
    [Worker]: ==================== Sync Agent Job 16 Ended ==================== SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    ERROR: [Worker]: Microsoft.ConfigurationManagement.Migration.MigrationException: 1 exceptions occurred during syncing.     at Microsoft.ConfigurationManagement.MigrationManager.SyncAgentJob.<get_ExecutionPlan>d__7.MoveNext()    
    at Microsoft.ConfigurationManagement.MigrationManager.Job`1.ExecuteNext() SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]: Start processing status changed event for MIG_SiteMapping.ID=16 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]:         Set the schedule item 16 end time SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]:         Set the schedule item 16 status to Failed SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]: End processing status changed event for MIG_SiteMapping.ID=16 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]: Disposing Job 16 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]: Removing Job 16 from job manager. SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]: Removing the Job with Id 16. SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]: Disposing worker SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]: Disposing current site connection SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = Unknown error 0x80131500, 80131500 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = Unknown error 0x80131500, 80131500 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    In the StatusMessages of Migration_Manager there are the following Errormessage:
    The Migration Manager on Configuration Manager site server "<SourceSITESERVER>" was unable to complete the SQL operation on the SQL Server "<DestinationSITESERVER>" of Configuration Manager 2007 due to error "-2146232060".
    Thanks in advance

    Hi,
    1.Please examine reports “All active package distributions” on SCCM 2007 to check whether have package is currently being installed or removed. Then refresh all DPs on SCCM 2007.
    After completing these actions above, try to re-gather data.
    2.If fail, please check the transaction log both on SCCM 2012 and SCCM 2007 SQL Server. Then, a SQL engineer should be involved in this case.(This forum do not support database issue)
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • "Enable distribution-point sharing for this source site" did not showing SCCM 2007 DPs as SCCM 2012 content shares for CM12 clients

    Hi
    We have one central site server and three primary site servers in SCCM 2007 and completed the SCCM 2012 migration as single hierarchy.
    During the migration, We have configured SCCM 2007 Central site server as source hierarchy for data gathering process and configured the "Enable distribution-point sharing for this source site" to make SCCM 2007 distribution points
    as SCCM 2012 content shares to serve SCCM 2012 migrated clients. Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this
    source site" but data gathering process is completing successfully.
    Is anyone have idea, why these SCCM 2007 DPs did not appearing as SCCM 2012 content shares under "Shared Distribution Points"
    Thanks in Advance
    srkr

     Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this source
    site" but data gathering process is completing successfully.
    Earlier all the shared DPs are showing under  Shared Distribution Points ? Or since starting itself these DPs are not showing down? Have you checked migmctrl.log for some clue?
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

  • WSUS Server settings and Migrating SCCM 2007 Clients to SCCM 2012 R2

    I am in the process of migrating a site from SCCM 2007 to SCCM 2012 R2.
    Whilst doing this I came across the following issue:
    The first issue is the workstations are woefully out of date, patch and update-wise, some have never had a patch applied as the branch IT staff are building them from the original disk. The policy is set in the SCCM 2007 client to point the machines at
    the 2007 WSUS server, which is not set to deliver any updates to 2007 clients and hasn't been for a while. So as soon as the client is installed they lose the ability to get updates from Microsoft and don't get them from the 2007 WSUS server either.
    Issue number 2 is the machines are a mixture of hand-built machines to SCCM 2007 delivered images, the SCCM image is patch using offline patching so they are somewhat up-to-date, but the hand-built machines are not and as there is no standardization on
    the Microsoft Update client settings, the IT person on-site sets it to whatever he/she feels like, as it makes no difference once the client is installed and the policy applied.
    So, when I come to update the client from 2007 to 2012, the following occurs
    The Client uninstalls, and the GPO policy settings for Windows Update are removed.
    Depending on the setup of the client initially, some machines are then going to Microsoft for their updates (literally 100s) and although the new client is installed the policy update does not fire to update the Windows Update Policy settings, sometimes
    for hours after the install finishes. My thoughts are that it just can't run the policy as it is bogged down by patches updating and, in some cases, rebooting and then updating some more.
    As a workaround I have had to go in an physically disable Microsoft Update on these machines, which stops the downloading and eventually allows the policy to apply, after which the machine then begins to receive patches from WSUS in a controlled method during
    maintenance windows.
    I have tried a number of approaches, even setting the Global Group Policy for Windows Update, but the install still removes the keys and basically sets Windows updates back to whatever it was set before the policy was applied and stays that way until the
    new client is installed and the Machine policy reapplied. This can be speeded up by initiating it on the client obviously, but that would mean going to each client or using right-click tools on each machine, which is not an option.
    What I would like to know is if there is something I am missing from my methods or is it just that I have never been on a site with such out of date workstations built in such different ways.
    Any help would be appreciated.

    First note that clients do *not* get updates from WSUS in ConfigMgr. The Windows Update Agent (WUA) must point to the WSUS integrated into ConfigMgr (by virtue of having the SUP installed on it) but this is only to make the update catalog/metadata available
    to it. Approving updates in WSUS is unsupported for ConfigMgr.
    What you've described above is all working as designed although these clients are falling into a gap between the 2007 and 2012 configuration and thus they are reaching out to Windows Update during this gap and installing updates. To prevent this, you
    need to disable automatic updates via a domain group policy. This will prevent all automated WUA activity including installing updates from any source automatically. This will not interfere with ConfigMgr Software Updates in any way though.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • SCCM 2007 to 2012 R2 Migration Data Gathering Error

     
    Hi guys ,
    I am working on SCCM 2007 to 2012 migration and stucked at data gathering process. Following
    error i am getting while gartering data process.I have made the erroe details bold to easily find.
    Migmcctrl.log is showing this error:
     [Worker]:                         Start syncing #MIG_Entity.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.957+420><thread=5024 (0x13A0)>
                                                                    [Worker]:        
                            Query against Legacy Site , @rowversion=00-00-00-00-00-0A-4C-E2, @collectionrowversion=00-00-A2-DD-00-20-26-14, @SourceSiteCode=ABC:            
          SELECT                    (CASE                      WHEN ISNULL(ext_cilp.DisplayName, ext_ci.CI_ID) IS NULL THEN NULL    
                     ELSE                           dbo.fnSCCMMultiByteToWideChar(                    
             CASE                                  WHEN (SELECT LocaleID FROM SMSData) IS NULL THEN (SELECT d.LocaleID FROM SMSData d)      
                               WHEN (SELECT LocaleID FROM SMSData) IN (-1, 0, 65535, 1024, 2048) THEN (SELECT d.LocaleID FROM SMSData d)                
                     ELSE (SELECT LocaleID FROM SMSData)                              END,              
                   CONVERT(VARBINARY(MAX), ISNULL(ext_cilp.DisplayName, ext_ci.CI_ID)))                  END)  as EntityName, CONVERT(NVARCHAR(256), ext_ci.CI_ID) as ObjectKey,
                              ext_ci.CIType_ID as ObjectTypeID, ext_ci.rowversion AS rowversion, ext_ci.ChangeAction as ChangeAction,                  
            ext_ci.CI_UniqueID as UniqueID                  FROM SCCM_Ext.vex_ConfigurationItems as ext_ci                   LEFT JOIN v_LocalizedCIProperties_SiteLoc
    as ext_cilp ON ext_ci.CI_ID=ext_cilp.CI_ID                   WHERE   (1 = 1 OR ISNULL(ext_ci.SourceSite, @SourceSiteCode) = @SourceSiteCode)  AND ext_ci.rowversion > @rowversion AND      
                       ISNULL(ext_ci.CIType_ID, 0)<>1 AND ISNULL(ext_ci.CIType_ID, 0)<>8                          AND ISNULL(ext_ci.CIType_ID,
    0)<>9~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.962+420><thread=5024 (0x13A0)>
                                                                    [Worker]:        
            End syncing object tables.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.964+420><thread=5024 (0x13A0)>
                                                                    [Worker]:        
    ========== End syncing objects metadata ==========~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.965+420><thread=5024 (0x13A0)>
                                                                    ERROR: [Worker]:      
      System.InvalidOperationException: ExecuteReader requires an open and available Connection. The connection's current state is closed.     at System.Data.SqlClient.SqlConnection.GetOpenConnection(String method)     at System.Data.SqlClient.SqlConnection.ValidateConnectionForExecute(String
    method, SqlCommand command)     at System.Data.SqlClient.SqlCommand.ValidateCommand(String method, Boolean async)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream,
    String method, DbAsyncResult result)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)     at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior
    behavior, String method)     at System.Data.SqlClient.SqlCommand.ExecuteReader()     at Microsoft.ConfigurationManagement.MigrationManager.LegacyRepository.GetDataReader(String sqlQuery, Dictionary`2 parameters, Boolean ignoreLocalSite)
        at Microsoft.ConfigurationManagement.MigrationManager.SyncAgentJob.<SyncObjectsInformation>d__25.MoveNext()     at Microsoft.ConfigurationManagement.MigrationManager.ExtensionMethods.<AttachErrorHandler>d__6`1.MoveNext()
        at Microsoft.ConfigurationManagement.MigrationManager.ExtensionMethods.<AttachErrorHandler>d__6`1.MoveNext()~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.966+420><thread=5024 (0x13A0)>
    STATMSG: ID=8617 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_MIGRATION_MANAGER" SYS=SCCM2012R2.RAT.Com SITE=ASL PID=2804 TID=5024 GMTDATE=Wed Mar 19 09:11:07.966 2014 ISTR0="SCCM2012R2.RAT.Com (ASL)" ISTR1="" ISTR2=""
    ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.966+420><thread=5024 (0x13A0)>
                                                                    [Worker]: ==================== Sync
    Agent Job 16777235 Ended ====================~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.967+420><thread=5024 (0x13A0)>
    ERROR: [Worker]: System.InvalidOperationException: ExecuteReader requires an open and available Connection. The connection's current state is closed.     at System.Data.SqlClient.SqlConnection.GetOpenConnection(String method)  
      at System.Data.SqlClient.SqlConnection.ValidateConnectionForExecute(String method, SqlCommand command)     at System.Data.SqlClient.SqlCommand.ValidateCommand(String method, Boolean async)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior
    cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)  
      at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)     at System.Data.SqlClient.SqlCommand.ExecuteReader()     at Microsoft.ConfigurationManagement.MigrationManager.LegacyRepository.GetDataReader(String
    sqlQuery, Dictionary`2 parameters, Boolean ignoreLocalSite)     at Microsoft.ConfigurationManagement.MigrationManager.SyncAgentJob.<SyncObjectsInformation>d__25.MoveNext()     at Microsoft.ConfigurationManagement.MigrationManager.ExtensionMethods.<AttachErrorHandler>d__6`1.MoveNext()
        at Microsoft.ConfigurationManagement.MigrationManager.ExtensionMethods.<AttachErrorHandler>d__6`1.MoveNext()     at Microsoft.ConfigurationManagement.MigrationManager.SyncAgentJob.<get_ExecutionPlan>d__7.MoveNext()  
      at Microsoft.ConfigurationManagement.MigrationManager.Job`1.ExecuteNext()~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.968+420><thread=5024 (0x13A0)>
                                                                    [Worker]: Start processing status
    changed event for MIG_SiteMapping.ID=16777235~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.975+420><thread=5024 (0x13A0)>
                                                                    [Worker]:        
    Set the schedule item 16777235 end time~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.976+420><thread=5024 (0x13A0)>
    [Worker]:         Set the schedule item 16777235 status to Failed~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.976+420><thread=5024 (0x13A0)>
                                                                    [Worker]: End processing status changed
    event for MIG_SiteMapping.ID=16777235~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.982+420><thread=5024 (0x13A0)>
                                                                    [Worker]: Disposing Job 16777235~~
     $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.984+420><thread=5024 (0x13A0)>
                                                                    [Worker]: Removing Job 16777235 from
    job manager.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.984+420><thread=5024 (0x13A0)>
                                                                    [Worker]: Removing the Job with Id
    16777235.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.985+420><thread=5024 (0x13A0)>
                                                                    [Worker]: Disposing worker~~  $$<SMS_MIGRATION_MANAGER><03-19-2014
    02:11:07.985+420><thread=5024 (0x13A0)>
                                                                    [Worker]: Disposing current site
    connection~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.985+420><thread=5024 (0x13A0)>
    ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = Unknown error 0x80131509, 80131509~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.985+420><thread=5024 (0x13A0)>
    ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = Unknown error 0x80131509, 80131509~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.986+420><thread=5024 (0x13A0)>
    Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.996+420><thread=4648
    (0x1228)>
    [MigrationManager]: Start two step scheduling for MIG_SiteMapping~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.997+420><thread=4648 (0x1228)>
    [MigrationManager]:         Step 1. Query the schedule items that was running or requested to start immediately ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.997+420><thread=4648 (0x1228)>
    [MigrationManager]:         Step 2. Query the first item in order of DateNextRun ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.022+420><thread=4648 (0x1228)>
    [MigrationManager]:                 The item MIG_SiteMapping 16777235 is scheduled to run at 03/19/2014 13:10:06 UTC, 03/19/2014 18:40:06 Local Time, sleep for 03:58:58.2280000.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014
    02:11:08.039+420><thread=4648 (0x1228)>
    [MigrationManager]: End two step scheduling for MIG_SiteMapping~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.039+420><thread=4648 (0x1228)>
    Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.040+420><thread=4648
    (0x1228)>
    [MigrationManager]: Start two step scheduling for MIG_Job~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.040+420><thread=4648 (0x1228)>
    [MigrationManager]:         Step 1. Query the schedule items that was running or requested to start immediately ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.041+420><thread=4648 (0x1228)>
    [MigrationManager]:         Step 2. Query the first item in order of DateNextRun ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.064+420><thread=4648 (0x1228)>
    [MigrationManager]:                 No item found. Sleep until the next event.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.084+420><thread=4648 (0x1228)>
    [MigrationManager]: End two step scheduling for MIG_Job~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.084+420><thread=4648 (0x1228)>
    [MigMCtrl]: the workitem queue is full!~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.084+420><thread=4648 (0x1228)>
    [MigMCtrl]: NOTIFY job manager ( 1, 0, C:\Program Files\Microsoft Configuration Manager\inboxes\mmctrl.box\16777235.SYN ).~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.085+420><thread=4648 (0x1228)>
    Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.086+420><thread=4648
    (0x1228)>
    [MigrationManager]: Start processing schedule changed event for MIG_SiteMapping.ID=16777235~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.086+420><thread=4648 (0x1228)>
    [MigrationManager]:         Update the DateNextRun of the schedule item MIG_SiteMapping.ID=16777235~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.118+420><thread=4648 (0x1228)>
    [MigrationManager]:         Calculating the next run time ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.118+420><thread=4648 (0x1228)>
    [MigrationManager]:                 This is a recurring schedule token.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.118+420><thread=4648 (0x1228)>
    [MigrationManager]:                 This item already run at 03/19/2014 09:10:27 UTC, 03/19/2014 14:40:27 Local Time, the next run time is 03/19/2014 13:10:27 UTC, 03/19/2014 18:40:27 Local Time.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014
    02:11:08.119+420><thread=4648 (0x1228)>
    [MigrationManager]:         Check requested operation for schedule item MIG_SiteMapping.ID=16777235~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.132+420><thread=4648 (0x1228)>
    [MigrationManager]: End processing schedule changed event for MIG_SiteMapping.ID=16777235~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.132+420><thread=4648 (0x1228)>
    [MigMCtrl]: EVENT raised ( 1, 0, C:\Program Files\Microsoft Configuration Manager\inboxes\mmctrl.box\16777235.SYN ).~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.133+420><thread=4648 (0x1228)>
    [MigMCtrl]: 1 instruction file processed.~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.133+420><thread=4648 (0x1228)>
    [MigMCtrl]: WAIT 3 event(s) for 60 minute(s) and 0 second(s).~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.133+420><thread=4648 (0x1228)>
    [MigMCtrl]: NOTIFY job manager ( 1, 0, C:\Program Files\Microsoft Configuration Manager\inboxes\mmctrl.box\16777236.SYN ).~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.315+420><thread=4648 (0x1228)>
    Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.316+420><thread=4648
    (0x1228)>
    [MigrationManager]: Start processing schedule changed event for MIG_SiteMapping.ID=16777236~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.331+420><thread=4648 (0x1228)>
    [MigrationManager]:         Update the DateNextRun of the schedule item MIG_SiteMapping.ID=16777236~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.350+420><thread=4648 (0x1228)>
    [MigrationManager]:         Calculating the next run time ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.350+420><thread=4648 (0x1228)>
    [MigrationManager]:                 This is a recurring schedule token.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.350+420><thread=4648 (0x1228)>
    [MigrationManager]:                 This item hasn't run yet, we will run it immediately.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.351+420><thread=4648 (0x1228)>
    [MigrationManager]:         Check requested operation for schedule item MIG_SiteMapping.ID=16777236~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.359+420><thread=4648 (0x1228)>
    [MigrationManager]:         Start operation requested, the scheduled item 16777236 will be started once computing resource is allocated.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.359+420><thread=4648 (0x1228)>
    [MigrationManager]: End processing schedule changed event for MIG_SiteMapping.ID=16777236~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.360+420><thread=4648 (0x1228)>
    [MigMCtrl]: EVENT raised ( 1, 0, C:\Program Files\Microsoft Configuration Manager\inboxes\mmctrl.box\16777236.SYN ).~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.360+420><thread=4648 (0x1228)>
    [MigMCtrl]: 1 instruction file processed.~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.361+420><thread=4648 (0x1228)>
    Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.362+420><thread=4648
    (0x1228)>
    [MigrationManager]: Start two step scheduling for MIG_SiteMapping~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.363+420><thread=4648 (0x1228)>
    [MigrationManager]:         Step 1. Query the schedule items that was running or requested to start immediately ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.363+420><thread=4648 (0x1228)>
    [MigrationManager]:                 Clear the requested operation.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.386+420><thread=4648 (0x1228)>
    [MigrationManager]:                 Calculating the next run time ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.387+420><thread=4648 (0x1228)>
    [MigrationManager]:                         This is a recurring schedule token.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.387+420><thread=4648 (0x1228)>
    [MigrationManager]:                         This item already run at 03/19/2014 09:21:36 UTC, 03/19/2014 14:51:36 Local Time, the next run time is 03/19/2014 13:21:36 UTC, 03/19/2014 18:51:36 Local
    Time.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.387+420><thread=4648 (0x1228)>
    [MigrationManager]:                 Set the next run time to 03/19/2014 13:21:36 UTC, 03/19/2014 18:51:36 LocalTime.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.388+420><thread=4648 (0x1228)>
    [MigrationManager]:                 Got an scheduled item 16777236. Set the sleep time to 0.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.411+420><thread=4648 (0x1228)>
    [MigrationManager]: End two step scheduling for MIG_SiteMapping~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.412+420><thread=4648 (0x1228)>
    [MigrationManager]: Impersonation is about to start ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:49.554+420><thread=4648 (0x1228)>
    [MigrationManager]: Impersonation succeed, current user identity is: rat\cmmig~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:49.555+420><thread=4648 (0x1228)>
    Connection string = Data Source=SCCM;Initial Catalog=SMS_ABC;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Encrypt=True;TrustServerCertificate=True;Application Name="Migration Manager".~~  $$<SMS_MIGRATION_MANAGER><03-19-2014
    02:21:49.555+420><thread=4648 (0x1228)>
    [MigrationManager]: Impersonation is reverted.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:49.683+420><thread=4648 (0x1228)>
    [MigrationManager]: Detected source collation SQL_Latin1_General_CP1_CI_AS~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:57.841+420><thread=4648 (0x1228)>
    [MigrationManager]: Detected destination collation SQL_Latin1_General_CP1_CI_AS~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:57.842+420><thread=4648 (0x1228)>
    STATMSG: ID=8600 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_MIGRATION_MANAGER" SYS=SCCM2012R2.RAT.Com SITE=ASL PID=2804 TID=4648 GMTDATE=Wed Mar 19 09:21:57.843 2014 ISTR0="SCCM2012R2.RAT.Com (ASL)" ISTR1="SCCM.RAT.COM"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:57.853+420><thread=4648 (0x1228)>
    [MigrationManager]: Job 16777236 added.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:57.854+420><thread=4648 (0x1228)>
    I am not getting any solution  of this please help.

    ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = Unknown error 0x80131509
    I previously had a similar issue. See blog post here
    http://gerryhampsoncm.blogspot.ie/2013/07/configmgr-sccm-2012-migration-sharing.html
    In my case one of the boundaries in the 2007 site had an empty Display column and this, it seems, is not allowed.
    Have you checked the box to "Enable DP sharing" while you create the Source Hierarchy? If so, try the process with the box unchecked.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • SCCM 2007 Migration to SCCM 2012

    Hello,
    I read http://social.technet.microsoft.com/Forums/en-US/58ba35e5-d84e-4741-8089-624f5269a2ca/sccm-2012-design-consideration-advice?forum=configmanagergeneral&prof=required with the following notes:
    Secondary vs. DP is a subjective call based on two factors: client count and available bandwidth. More clients and/or less bandwidths means secondary site, less clients and/or more bandwidth means DP. Both use a server OS so there's really no cost difference, just some added complexity for a secondary site. Without knowing the bandwidth, no way for me to be able to say one way or the other.
    As for IBCM, correct, it's no a primary site server, it's simply a site system that typically hosts an MP, DP, and SUP. The App Catalog Website Point is also applicable.
    Are you planning on managing legacy mobile devices or Mac OSX? If not, the Enrollment Proxy Point is not needed -- it's not applicable to IBCM anyway to my knowledge.
    Also, the FSP must be on a separate site system so that clients can communicate with it via HTTP.
    I have for now two sites:
    - 25,000 Desktops on one site
    - 1,500 Servers on the second site
    in SCCM 2007 I had three sites: One Parent doing the reporting and two child sites handling the inventory, distribution, etc... (No SUP do far)
    I have on each child sites 1 DP.
    What should be changed for SCCM 2012?
    What is "More Clients" or "Less Clients" ?
    "More Bandwidth" or "Less Bandwidth"?
    Thanks,
    Dom
    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    Hello Dom,
    If you have Two Primary servers you may need to plan for a CAS (Central administration site), in SCCM 2012 when you have more than one primary server you need a CAS to connect them. But remember the CAS does not
    process any client data, DPs nor MPs (hardware nor software inventory), and bear in mind that a primary stand-alone can support up to 100,000 clients, and in SCCM 2012 the big idea is to simplify the hierarchy. So if you have a primary site you can manage
    a lot of clients, and you can separate them in your case in boundaries, boundaries in 2012 do two things: Site assignment and content lookup, but they only work with boundary groups, in which you set the limits in the boundary, and latter associate it with
    a boundary group.   
    You can then just have a primary server and remote DPs, and decide how the clients will look for content in the DPs with the boundaries and boundary groups. The bandwidth needs to be really important about sending
    packages between sites, or if the boundaries are not configured properly the clients can end up looking for content where it should not.  Also don’t forget about fallback packages and content, because DPs and packages can be set as fallback, so if clients
    cannot find in a local DP they will search those packages.
    Below a few references that may help you with your migration.
    Any more questions, please let me know.  
    References
    ==========
    Planning for Configuration Manager Sites and Hierarchy
    http://technet.microsoft.com/en-us/library/gg682075.aspx
    Planning for Sites and Hierarchies in Configuration Manager
    http://technet.microsoft.com/en-us/library/gg712681.aspx
    Migrating Hierarchies in System Center 2012 Configuration Manager
    http://technet.microsoft.com/en-us/library/gg682006.aspx
    VIDEOS
    ========
    Configuration Manager 2012: Plan, Deploy, and Migrate from Configuration Manager 2007
    http://technet.microsoft.com/en-us/video/configuration-manager-2012-plan-deploy-and-migrate-from-configuration-manager-2007.aspx
    Microsoft System Center Configuration Manager 2012: Plan, Deploy, and Migrate from Configuration Manager 2007 to 2012
    http://channel9.msdn.com/Events/TechEd/Europe/2012/MGT313
    Cheers,
    Renato S. Pacheco

  • SCCM 2012 R2 coexist with SCCM 2007 - DPs issue

    Hi all,
    I have a SCCM 2012 R2 which coexists with SCCM 2007 and I'm not interested in a migration, but my question concerning the use of DPs. Is it possible for 2012 R2 clients to use a 2007 DPs, i.e. are there settings for a sort of compatibility? I've looked among
    links, but most of them are related to migration.
    Please advise,
    Domenico

    No, you can only share a distribution point during a migration between a source and destination hierarchy (see also:
    http://technet.microsoft.com/en-us/library/gg712275.aspx). Without a migration that's not possible. 
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

Maybe you are looking for

  • Regarding the Function.......

    Hi gurus, What function can I use to create a drop down box in an input schedule in BPC ?  I have a schedule where I want the users to be able to select an account, I have 20 accounts and they need to select one from the drop down shoing all the 20 .

  • Converting Organizer Catalog created for version 8 to Elements 11 errors out. Help?

    The conversion of the Organizer Catalog version 8 to use with Elements 11 errors out. It asked me to repair the old catalog. I went back to 8, repaired it and optmized it as other articles mentioned, and still did  not work. would somebody please hel

  • Bid approval workflow - adding approvers

    Hi experts - We are implementing the n-level bid award approval workflow (WS14500044).  We would like the approvers to be able to add approvers/users once the workflow has started. We can see that you can add approvers before the bid is awarded (ie:

  • Details about ModuleData and ModuleContext

    Hi All,      I need more deatils about the Module Programming parameters <b>"ModuleData", "ModuleContext" and "XMLPayload"</b> like the members of these classes and their functionalities etc. Looking for your replies. Thanks in advance. Rgds, Joe.

  • Cropping of images during book binding process

    Would anybody know how much cropping occurs during the bookbinding process? I have created a book using the Picture Book theme, and just read in the online help that allowances need to be made for cropping that occurs during book binding. Any help wo