SCCM 2007 and F5 Big IP Application Security Manager

Hey,
Lately I was tasked to check the option that our SCCM MP will work behind application level firewall that was designed especially for HTTP and HTTPs traffic,
The product name is Big IP ASM / Application Security Manager from "F5",
Has anyone tried placing SCCM MP behind such an appliance?

We use F5 and I know other companies that do. Here is the problem that we see.
1. It took a while for the team to figure out that they needed to our cert to the F5 to allow the traffic to pass.
2. We see 500 errors every few seconds from the applicance
3. We see problems in the MPcontrol.log since it can't contact the Microsoft NLB. but it still works.
so yes you can do it. It doesn't play nice with the console so ignore some of the errors it throws at you. We have F5/big IP running for our MP NLB and SUP NLB
FYI, we are running in Native mode also...
http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com

Similar Messages

SCCM 2007 and Active Directory - On-boarding and Off-Boarding Process

Currently, when a user resigns from our company, we rebuild their computer immediately and provide to another user.
From a best practice perspective, should we delete the computername from AD and then rebuild and join to the Domain? We also have SCCM 2007 in place. Are there other best practices for SCCM 2007 and AD that we should be following for on-boarding
and off-boarding users? Any suggestions would be greatly appreciated. :-)

With respect to AD, it will be better to reset the account rather than deleting it. This way the SID is retained and all permissions (for DNS records etc) and AD group memberships will be retained. AD group memberships will be more significant, depending
on whether it is used for SCCM collection definition rules
In SCCM, if the record is not deleted, it will be identified as a known computer and OSD advertisement can be pushed on the client. Ideally task sequence should use same name as the SCCM resource record for naming the newly built computer. In case AD/SCCM
objects are deleted, duplicate records may get created depending on the timing of client registration and AD system discovery cycle. If SCCM client gets installed and registered before next AD system discovery cycle, there shouldn't be any issues.
But if AD discovery cycle runs before client registration, two records will show up in SCCM console and one will be obselete, which has to be deleted manually. This issue can be resolved by adjusting the frequency and schedule of AD system discovery cycle.
My suggestion will be to reset the computer account in AD and retain the SCCM resource in case of machine rebuild scenarios. In case of task sequence not retaining the computer name, custom steps can be added in TS to set variables as required.

SCCM 2007 AND Managing Laptop Connected with NetMotion (VPN) and Chameleon Cellular Connections

We could use some assistance if anyone is doing any of this.
We have mobile laptops that are used out in the field:
They have SCCM client
Netmotion VPN
Chameleon Celluar Connections
Two things:
1) Is there a piece of SCCM 2007 currently that could manage these (we see SCCM Mobile--but that appears as like smart phones, iphones, ipads, etc). These are toughbooks (panasonic laptops) and they need to utilize several applications) . We
need to manage these differently than laptops with Direct Access.
2) We do not want these people receiving SCCM pushes or inventory or WSUS (this is done through our WSUS server) pushes while on cellular network. When they come back from the field and hit our wireless or connect via network, we would like them to
receive these types of pushing throughout the night. Problem: They set up and configured the laptops to make this cellular Chameleon appear as a fast network and doesn't appear as a device off these laptops. Several pushes are reg advertisements;
although we are moving to mostly task sequences. Which most of you know a regular advertisement will allow us to stop on a slow network, but the task sequence advertisement does not have those capabilities. So we are in a dilema. Again that
only took care of pushes and not all the other things SCCM related we do not want to happen.
How do others handle remote toughbooks in the field on cell connections where the techs want them to appear as fast connection, yet stop SCCM packages from delivering on them or anything like inventory being done on them.
Techs are investigating a rule on Netmotion that we might put in place, we have also thought if setting up a boundary on SCCM related to these Netmotion machines being as 10.0.0.x being slow, but we are unsure how to stop everything or write a correct rule
to stop anything SCCM related while NOT connected via network or wireless?
Ideas, thoughts, pieces of SCCM 2007 that we have no invesigated, etc?

Yes, I know this is an old post, but I’m trying to clean them up.
Honestly, I would look at CM12 for this. CM12 added a number of features for the exact issue.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2007 and 2012 coexistence and Cross Forest support

Hi All
I have a question
My company has recently acquired another company
That company exist of 2 forests (forest A has one domain namely domain A : and forest B has one domain namely domain B) with a two way forest trusts between them
Domain A has a SCCM 2007 primary Site
Domain B has a SCCM 2007 primary site and 2 secondary Sites
The active directory schema is extended in both domains
We cannot migrate the SCCM 2007 environment because it is a mess , so we want to build a new SCCM 2012 R2 environment into Domain B and from that environment manage both domains (OSD, software deployment client management ...)
We want to install a SCCM 2012 R2 (CU3) primary server into domain B and add two distribution points instead of the two secondary sites and manage both forests (domain A and B) from that primary site server
Now my questions are
1 )
Can an SCCM 2007 environment coexist with a SCCM 2012 environment?
I believe it can If I make sure that in the new SCCM 2012 environment we only use boundary groups for content locations and not for site assignment and in the SCCM 2007 environment (domain A and domain B) I need to disable the client push account.
2)
Discovery , How do we make sure that systems and users are discovered from both domains?
Do we need to do some additional configuration to make that happen or will this be no problem because of the Two way trust and active directory schema extension.
3 )
Can we do all the management from the new SCCM 2012 R2 site , also OSD deployments for both domains ?
I hope someone can help me with these questions
Thanks in advance
Regards
Johan

Hi All
After talk with management and local support the decision is made not to deploy only distribution points but instead deploy secondary sites (of course with management point and distribution point) because the bandwidth to these sites is a
problem.
So the situation will be Domain A Primary site (SCCM 2012 R2) and for both remote locations a secondary site , domain B a secondary site (of course all the related ports need to be opened for both domains as explained here https://technet.microsoft.com/en-us/library/hh427328.aspx
Question
Can we do all the management from the new primary SCCM 2012 R2 site (domain A) , also OSD deployments for both domains A and B ?
I hope someone can review this
Thx in advance
Regards Johan

SCCM 2007 and SED (Self encrypting HDD) - How do I report on them?

Currently we are moving to a new Encryption software and we have a large amount of workstations with SED hdd - this works brilliant as the encryption time with supported software was brought down from 6 hours to less than 5 min.
My question is how do I distinguish between normal HDD and SED Drives in my environment (the fleet of 4000+ workstations)and report on them in SCCM.
I am getting allot of different topics on to extend my mof files (which voids our support contract) and that its not recommended.
and based on the outcome of my MS how-to call I am not sure that anybody thought of this as there recommendation is to see what software is installed in Programs and Features and report using software reporting, the thing is that its not a type of software
installed that will give you the functionality but the physical HDD type...
Please if someone can provide me with some detail or just give me a nudge in the right direction.
Thank you.

Assuming that the SED has a unique PnP ID (or group of PnP IDs if it's a family of products) in Device Manager, you could scan for their existence that way (using a default SCCM 2007 report to boot). Since the hardware is unique, and I'm assuming
you are doing Hardware Inventory, this is how I'd try and spot them.
David Coulter | http://DCtheGeek.blogspot.com |
@DCtheGeek

Re-use network share for SUP downloads between SCCM 2007 and 2012?

We currently have network folders created to download software updates for SCCM 2007. Now that we are bringing up SCCM 2012, can I point SUP downloads to those same folders so I don't need to duplicate file space for both SCCM environments? Is
the structure the same so either SCCM can pull from them to their respective DPs?
Thanks!
Russell

No, you can't directly use the same folders and files for the package source locations. You can specify the 2007 folder as a source to download content from though when downloading updates.
Are you really that concerned about 20-50GB though? If so why? You should be using cheap storage for this.
Jason | http://blog.configmgrftw.com | @jasonsandys

SCCM 2007 and WSUS 6

Is it possible to use a Server 2012 instance with WSUS 6 as a SUP for SCCM 2007?

Only WSUS 3.0
https://technet.microsoft.com/en-us/library/bb680712.aspx
Software updates in Configuration Manager 2007 Service Pack 1 (SP1) requires WSUS 3.0 SP1 or WSUS 3.0 Service Pack 2 (SP2). WSUS 3.0 SP2 is required to support Configuration Manager 2007 SP2 software update management for
the Windows 7 and Windows Server 2008 R2 operating systems.

SCCM 2007 and 2012 Catalogs have a slight discrepancy when adding AR XI (11.0.10) update

SCCM 2007 does not display the Bulletin and Article IDs, whereas SCCM 2012 does. Can this be corrected for SCCM 2007as well?

Ben,
If you're referring to SCUP 2011 (Download System Center Updates Publisher 2011 from Official Microsoft Download Center), we are already using this in our environemnt. Yes... SCCM 2007 is supported by SCUP 2011.

Integrating SCUP 2011 in SCCM 2007 and WSUS

This is a 1 server configuration. All roles and apps are installed onto this box. I installed SCUP without a problem, but when I go to enable publishing to an update server "An Error Occurred"
It works when enabling to configMgr Server. I tried running as admin still having the same issue. I thought I could leave it with ConfigMgr enabled and Update server not configured, but Published is disabled.
The Message:
Failed to connect to the update server. Check your update server configuration settings and try connecting again. System.web.services.protocols.soapexception; System.web.services.protocols.soapexception: server was unable to process request.
---> System.unauthorizedaccessexeption" Access to the temp direcotry is denied. Identify 'NT Authority\Network Services' under which XmlSerializer is running does not have suffiient permission to access the temp directory. CodeDom will
use the user account to process is usingto do the compilation, so if the user doesnt have access to system temp directory, you will not be able to compile. Use the path.GetTempPath() API to find out the temp directory location.
at system.xml.serialization.compiler.compile(asembly parent, string ns, xmlserializercompilerparameters xmlparameters, evidence evidence)
blah blah
(can't copy and paste this message hope this gets me somewhere)
Tim

Fixed this by changing the permissions to the temp dir in windows. Blah. thanks google.

SCCM 2007 and 2012 local cache folder

I have created a package with install action action that first unzips a zip file into the CCM cache folder then perfoms other actions using the unzipped files. Would that cause any problems? I've "heard"
should one not muck around in the Cache folder...

ConfigMgr does try to clean the cache up based on certain criteria so it's possible this may interfere with that. Best to always use a folder not controlled by a specific application like the Windows\Temp folder.
Jason | http://blog.configmgrftw.com

Configure WSUS for SCCM 2007 to received patchs and deploy

Dears,
I have installled SCCM 2007 and WSUS server in another server now i want to confiure for patching.
how to do that and and ensure SCCM 2007 server receiving patchs.
Please assist.
[email protected]

Hi,
Would suggest you read the below on how to create/configure a SUP
http://technet.microsoft.com/en-us/library/bb633236.aspx
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway

WDS and SCCM 2007 task sequence export/import

We currently have SCCM 2007 and a separate WDS server. There is a task sequence with a boot image/packages on the SCCM server and I would like to export this to the WDS server for deployment, how do I go about doing this?
Thanks.

Are you talking about using the boot image from ConfigMgr on your separate WDS server?
If so, there is no direct or supported way to do this. PXE booting a system using ConfigMgr involves more than transferring the boot image to the client.
Here's how you can do it although you should question whether this is a good thing to do or not as it adds overhead: http://www.deployvista.com/Home/tabid/36/EntryID/54/language/sv-SE/Default.aspx
Jason | http://blog.configmgrftw.com

SCCM 2007 Hardware Inventory v_GS_VIRTUAL_MACHINE table missing the PhysicalHostName0 and PhysicalHostNameFullyQualifi0 Columns

Hi All,
I went to run a query in SQL Management Studio the other day and realized that the
v_GS_VIRTUAL_MACHINE table missing the PhysicalHostName0
and PhysicalHostNameFullyQualifi0 Columns.
I reviewed the Configuration.mof and SMS_def.mof files and they seem fine. The Configuration.mof file has the below in it where it should be gathering the PhysicalHostName0 and PhysicalHostNameFullyQualifi0 parameters.
// Virtual PC
#pragma namespace ("\\\\.\\root\\cimv2")
[DYNPROPS]
class Win32Reg_SMSGuestVirtualMachine
    [key]
        string InstanceKey;
        string PhysicalHostName;
        string PhysicalHostNameFullyQualified;
[DYNPROPS]
instance of Win32Reg_SMSGuestVirtualMachine
    InstanceKey = "VPCKey";
    [PropertyContext("local|HKEY_LOCAL_MACHINE\\Software\\Microsoft\\Virtual Machine\\Guest\\Parameters|PhysicalHostName"),
                    Dynamic, Provider("RegPropProv")]
        PhysicalHostName;
    [PropertyContext("local|HKEY_LOCAL_MACHINE\\Software\\Microsoft\\Virtual Machine\\Guest\\Parameters|PhysicalHostNameFullyQualified"),
                    Dynamic, Provider("RegPropProv")]
        PhysicalHostNameFullyQualified;
[DYNPROPS]
class Win32Reg_SMSGuestVirtualMachine64
    [key]
        string InstanceKey;
        string PhysicalHostName;
        string PhysicalHostNameFullyQualified;
[DYNPROPS]
instance of Win32Reg_SMSGuestVirtualMachine64
    InstanceKey = "VPCKey";
    [PropertyContext("local|HKEY_LOCAL_MACHINE\\Software\\Microsoft\\Virtual Machine\\Guest\\Parameters|PhysicalHostName"),
                    Dynamic, Provider("RegPropProv")]
        PhysicalHostName;
    [PropertyContext("local|HKEY_LOCAL_MACHINE\\Software\\Microsoft\\Virtual Machine\\Guest\\Parameters|PhysicalHostNameFullyQualified"),
                    Dynamic, Provider("RegPropProv")]
        PhysicalHostNameFullyQualified;
I'm not really sure what to look at next and am hoping someone else has experienced this issue before.
I have looked at other customers running SCCM 2007 and compared the Configuration.mof and SMS_def.mof files, which look pretty much the same.
Thanks in advanced.
Andrew

Are they running on virtual pc or virtual server? Notice that I said virtual pc and virtual server, not Hyper-v. In CM12 this is fix and will show the physical server when running on Hyper-v.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2007 to 2012 R2 Migration Data Gathering Error: RPC

Hi Guys,
I am doing Migration from SCCM 2007 to 2012 R2. Facing a RPC connection Error.
Following is the details from Migmcctrl.log
[MigMCtrl]: Migration Manager has received a new job request
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
4648 (0x1228)
Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
4648 (0x1228)
[MigrationManager]: Start two step scheduling for MIG_SiteMapping
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
4648 (0x1228)
[MigrationManager]: Step 1. Query the schedule items that was running or requested to start immediately ...
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
4648 (0x1228)
[Worker]: Start processing status
changed event for MIG_SiteMapping.ID=16777236
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
5024 (0x13A0)
[Worker]:
Set the schedule item 16777236 start time SMS_MIGRATION_MANAGER
19-03-2014 02:21:57 5024 (0x13A0)
[Worker]:
Set the schedule item 16777236 status to Running
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
5024 (0x13A0)
[Worker]: End processing status changed
event for MIG_SiteMapping.ID=16777236 SMS_MIGRATION_MANAGER
19-03-2014 02:21:57 5024 (0x13A0)
[Worker]: ==================== Sync
Agent Job 16777236 Started ====================
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
5024 (0x13A0)
[MigrationManager]: Step 2. Query the first item in order of DateNextRun ...
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
4648 (0x1228)
[MigrationManager]: No item found. Sleep until the next event.
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
4648 (0x1228)
[MigrationManager]: End two step scheduling for MIG_SiteMapping
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
4648 (0x1228)
Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
4648 (0x1228)
[MigrationManager]: Start two step scheduling for MIG_Job
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
4648 (0x1228)
[MigrationManager]: Step 1. Query the schedule items that was running or requested to start immediately ...
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
4648 (0x1228)
[MigrationManager]: Step 2. Query the first item in order of DateNextRun ...
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
4648 (0x1228)
[MigrationManager]: No item found. Sleep until the next event.
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
4648 (0x1228)
[MigrationManager]: End two step scheduling for MIG_Job
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
4648 (0x1228)
[MigMCtrl]: the workitem queue is full! SMS_MIGRATION_MANAGER
19-03-2014 02:21:57 4648 (0x1228)
[MigMCtrl]: WAIT 3 event(s) for 60 minute(s) and 0 second(s).
SMS_MIGRATION_MANAGER 19-03-2014 02:21:57
4648 (0x1228)
[Worker]:
========== Start prerequisite checking ==========
SMS_MIGRATION_MANAGER 19-03-2014 02:22:05
5024 (0x13A0)
[Worker]:
Validating source site for central site ...
SMS_MIGRATION_MANAGER 19-03-2014 02:22:05
5024 (0x13A0)
[Worker]:
========== End prerequisite checking ==========
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
5024 (0x13A0)
[Worker]: ==================== Sync
Agent Job 16777236 Ended ====================
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
5024 (0x13A0)
ERROR: [Worker]: System.Runtime.InteropServices.COMException
(0x800706BE): The remote procedure call failed. (Exception from HRESULT: 0x800706BE) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
at Microsoft.ConfigurationManagement.SoftwareLibrary.ObjectSerialization.Adapters.WmiObjectManager.GetObjects(ObjectSearchCriteria criteria) at Microsoft.ConfigurationManagement.SoftwareLibrary.ObjectSerialization.Adapters.WmiObjectManager.TryGetInstance(ObjectKey
objKey) at Microsoft.ConfigurationManagement.SoftwareLibrary.ObjectSerialization.ObjectManager.GetInstance(ObjectKey objKey, LibraryContext context) at Microsoft.ConfigurationManagement.SoftwareLibrary.ObjectSerialization.Library.Get[T](Expression`1
key) at Microsoft.ConfigurationManagement.MigrationManager.SyncAgentJob.<get_ExecutionPlan>d__7.MoveNext() at Microsoft.ConfigurationManagement.MigrationManager.Job`1.ExecuteNext()
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
5024 (0x13A0)
[Worker]: Start processing status
changed event for MIG_SiteMapping.ID=16777236
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
5024 (0x13A0)
[Worker]:
Set the schedule item 16777236 end time SMS_MIGRATION_MANAGER
19-03-2014 02:34:55 5024 (0x13A0)
[Worker]:
Set the schedule item 16777236 status to Failed
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
5024 (0x13A0)
[Worker]: End processing status changed
event for MIG_SiteMapping.ID=16777236 SMS_MIGRATION_MANAGER
19-03-2014 02:34:55 5024 (0x13A0)
[Worker]: Disposing Job 16777236
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
5024 (0x13A0)
[Worker]: Removing Job 16777236 from
job manager. SMS_MIGRATION_MANAGER
19-03-2014 02:34:55 5024 (0x13A0)
[Worker]: Removing the Job with Id
16777236. SMS_MIGRATION_MANAGER
19-03-2014 02:34:55 5024 (0x13A0)
[Worker]: Disposing worker
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
5024 (0x13A0)
[Worker]: Disposing current site
connection SMS_MIGRATION_MANAGER
19-03-2014 02:34:55 5024 (0x13A0)
ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = The remote procedure call failed., 800706be
SMS_MIGRATION_MANAGER
19-03-2014 02:34:55 5024 (0x13A0)
ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = The remote procedure call failed., 800706be
SMS_MIGRATION_MANAGER
19-03-2014 02:34:55 5024 (0x13A0)
Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
4648 (0x1228)
[MigrationManager]: Start two step scheduling for MIG_SiteMapping
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
4648 (0x1228)
[MigrationManager]: Step 1. Query the schedule items that was running or requested to start immediately ...
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
4648 (0x1228)
[MigrationManager]: Step 2. Query the first item in order of DateNextRun ...
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
4648 (0x1228)
[MigrationManager]: The item MIG_SiteMapping 16777236 is scheduled to run at 03/19/2014 13:21:36 UTC, 03/19/2014 18:51:36 Local Time, sleep for 03:46:40.4440000.
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
4648 (0x1228)
[MigrationManager]: End two step scheduling for MIG_SiteMapping
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
4648 (0x1228)
Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
4648 (0x1228)
[MigrationManager]: Start two step scheduling for MIG_Job
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
4648 (0x1228)
[MigrationManager]: Step 1. Query the schedule items that was running or requested to start immediately ...
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
4648 (0x1228)
[MigrationManager]: Step 2. Query the first item in order of DateNextRun ...
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
4648 (0x1228)
[MigrationManager]: No item found. Sleep until the next event.
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
4648 (0x1228)
[MigrationManager]: End two step scheduling for MIG_Job
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
4648 (0x1228)
[MigMCtrl]: the workitem queue is full! SMS_MIGRATION_MANAGER
19-03-2014 02:34:55 4648 (0x1228)
[MigMCtrl]: NOTIFY job manager ( 1, 0, C:\Program Files\Microsoft Configuration Manager\inboxes\mmctrl.box\16777236.SYN ).
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
4648 (0x1228)
Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
4648 (0x1228)
[MigrationManager]: Start processing schedule changed event for MIG_SiteMapping.ID=16777236
SMS_MIGRATION_MANAGER 19-03-2014 02:34:55
4648 (0x1228)
[MigrationManager]: Update the DateNextRun of the schedule item MIG_SiteMapping.ID=16777236
SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
4648 (0x1228)
[MigrationManager]: Calculating the next run time ...
SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
4648 (0x1228)
[MigrationManager]: This is a recurring schedule token.
SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
4648 (0x1228)
[MigrationManager]: This item already run at 03/19/2014 09:21:57 UTC, 03/19/2014 14:51:57 Local Time, the next run time is 03/19/2014 13:21:57 UTC, 03/19/2014 18:51:57 Local Time.
SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
4648 (0x1228)
[MigrationManager]: Check requested operation for schedule item MIG_SiteMapping.ID=16777236
SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
4648 (0x1228)
[MigrationManager]: End processing schedule changed event for MIG_SiteMapping.ID=16777236
SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
4648 (0x1228)
[MigMCtrl]: EVENT raised ( 1, 0, C:\Program Files\Microsoft Configuration Manager\inboxes\mmctrl.box\16777236.SYN ).
SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
4648 (0x1228)
[MigMCtrl]: 1 instruction file processed. SMS_MIGRATION_MANAGER
19-03-2014 02:34:56 4648 (0x1228)
[MigMCtrl]: WAIT 3 event(s) for 60 minute(s) and 0 second(s).
SMS_MIGRATION_MANAGER 19-03-2014 02:34:56
4648 (0x1228)
help me out please.
Thanks

Hi Guys ,I figured out the issue.
It was the boundary in SCCM 2007.Actually my SCCM 2007 and SCCM 2012 server were accessing the same Active Directory Site-(Default First Site Name).
I deleted the boundary and every thing went well.
So thing is SCCM 2007 and SCCM 2012 should not fall under same active directory Site.
Cheers

SCCM 2007 Won't remove Distribution Points in Site Status

I'm working SCCM 2007 and have removed some orphaned Distribution Points by going through and removing any application assigned to them and then removing the roles under the Site Systems Folder.
The Systems then disappeared from under Site Systems but when I look under Site Status, they're still appearing in the list there and I have no option to delete them.
I've tried following this link (http://myitforum.com/myitforumwp/2012/02/10/removing-old-orphaned-site-systems-from-the-sms-and-configmgr-2007-database/) and changing their replication field from a 0 to -1 which removes them temporarily but they always return
into the Site Status.
I can't see them anywhere else in the console, they're definitely not sited under Site Systems so I'm a bit stuck and have 3 sites saying they're in a Critical State in Site Status because the Orphaned Distribution Points are still appearing there and I
can't see how to remove them.
To clarify, I removed the orphaned Distribution points over a week ago so I doubt it's something like waiting for the system to e them. I've tried rebooting the SCCM server and this has made no difference
My list of servers under Site Systems;
My Servers in Site Status;

Execute the following command on the database
Delete from DPinfo where server name like '%DPName%'
It is completely unsupported to delete anything from the CM07 database. Before doing this you should contact CSS directly for support and ONLY with their guidance should you perform this task.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2007 and F5 Big IP Application Security Manager

Similar Messages

Maybe you are looking for