SCCM 2007 migrated clients (SCCM 2012) are still visible

Hi,
We migrated some SCCM 2007 Windows 7 clients to SCCM 2012 (upgraded the clients via push).
This worked fine for most of the clients but not all so I cannot just delete clients from SCCM 2007.
How can we clean the succesfully migrated? I cannot see which ones are succesfully migrated in SCCM 2007, the all show active (even the succesfully migrated ones).
Pls advise.
J.
Jan Hoedt

The client will become inactive if it's not requesting client policies, sending heartbeats, sending inventories, or sending status messages any more in a period of by default 7 days (but it all depends on the configured intervals). Also, if you
delete clients that are still active, they will come back with the next heartbeat if they are still active.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

  • SCCM 2007 Migration to SCCM 2012

    Hello,
    I read http://social.technet.microsoft.com/Forums/en-US/58ba35e5-d84e-4741-8089-624f5269a2ca/sccm-2012-design-consideration-advice?forum=configmanagergeneral&prof=required with the following notes:
    Secondary vs. DP is a subjective call based on two factors: client count and available bandwidth. More clients and/or less bandwidths means secondary site, less clients and/or more bandwidth means DP. Both use a server OS so there's really no cost difference, just some added complexity for a secondary site. Without knowing the bandwidth, no way for me to be able to say one way or the other.
    As for IBCM, correct, it's no a primary site server, it's simply a site system that typically hosts an MP, DP, and SUP. The App Catalog Website Point is also applicable.
    Are you planning on managing legacy mobile devices or Mac OSX? If not, the Enrollment Proxy Point is not needed -- it's not applicable to IBCM anyway to my knowledge.
    Also, the FSP must be on a separate site system so that clients can communicate with it via HTTP.
    I have for now two sites:
    - 25,000 Desktops on one site
    - 1,500 Servers on the second site
    in SCCM 2007 I had three sites: One Parent doing the reporting and two child sites handling the inventory, distribution, etc... (No SUP do far)
    I have on each child sites 1 DP.
    What should be changed for SCCM 2012?
    What is "More Clients" or "Less Clients" ?
    "More Bandwidth" or "Less Bandwidth"?
    Thanks,
    Dom
    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    Hello Dom,
    If you have Two Primary servers you may need to plan for a CAS (Central administration site), in SCCM 2012 when you have more than one primary server you need a CAS to connect them. But remember the CAS does not
    process any client data, DPs nor MPs (hardware nor software inventory), and bear in mind that a primary stand-alone can support up to 100,000 clients, and in SCCM 2012 the big idea is to simplify the hierarchy. So if you have a primary site you can manage
    a lot of clients, and you can separate them in your case in boundaries, boundaries in 2012 do two things: Site assignment and content lookup, but they only work with boundary groups, in which you set the limits in the boundary, and latter associate it with
    a boundary group.   
    You can then just have a primary server and remote DPs, and decide how the clients will look for content in the DPs with the boundaries and boundary groups. The bandwidth needs to be really important about sending
    packages between sites, or if the boundaries are not configured properly the clients can end up looking for content where it should not.  Also don’t forget about fallback packages and content, because DPs and packages can be set as fallback, so if clients
    cannot find in a local DP they will search those packages.
    Below a few references that may help you with your migration.
    Any more questions, please let me know.  
    References
    ==========
    Planning for Configuration Manager Sites and Hierarchy
    http://technet.microsoft.com/en-us/library/gg682075.aspx
    Planning for Sites and Hierarchies in Configuration Manager
    http://technet.microsoft.com/en-us/library/gg712681.aspx
    Migrating Hierarchies in System Center 2012 Configuration Manager
    http://technet.microsoft.com/en-us/library/gg682006.aspx
    VIDEOS
    ========
    Configuration Manager 2012: Plan, Deploy, and Migrate from Configuration Manager 2007
    http://technet.microsoft.com/en-us/video/configuration-manager-2012-plan-deploy-and-migrate-from-configuration-manager-2007.aspx
    Microsoft System Center Configuration Manager 2012: Plan, Deploy, and Migrate from Configuration Manager 2007 to 2012
    http://channel9.msdn.com/Events/TechEd/Europe/2012/MGT313
    Cheers,
    Renato S. Pacheco

  • OSD: upgrade sccm 2007 (XP) client to 2012, then deploy TS

    Hi,
    We have some Windows XP machines in our SCCM 2007. They are discovered via AD in SCCM 2012.
    Now we would like to upgrade their client to SCCM 2012 then deploy (available) a task sequence to it (Windows 7 install). This way users can choose whenever to upgrade to Windows 7.
    My questions:
    *When I right click an XP/SCCM 2007 client and choose upgrade, nothing happens. How can I troubleshoot/follow the upgrade?
    *Should the task sequence (SCCM MDT) contain a particular step or can we use the same as a bare metal (PXE) deploy (we do not want to keep any data from the pc)?
    Please advise,
    J.
    Jan Hoedt

    Do I understand it correct, that you are trying a Client Push Installation? If so, then start with looking at the ccm.log on the server-side for errors. That log file contains all the information about the push action.
    You should be able to use the same task sequence. Just check the deployment settings and the first action of the task sequence (make sure it restarts in WinPE).
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • SCCM 2007 Secondary to SCCM 2012 Secondary Site

    we are planning to upgrade SCCM 2007 secondary to SCCM 2012 Secondary Site, As per the TechNet document that I understand i can't do in place upgrade of Secondary site. I can do only upgrade
    of 2007 DP to 2012 DP,
    This is what I plan,
    1. Install a SCCM 2012 Secondary site
    2. Enable DP sharing in 2012 and share the DP of 2007
    3. Upgrade the 2007 DP into 2012 DP on 2012 Secondary Site.
    My question is,
    1. How to copy the DP package to 2012 Secondary Server DP, it will happen during the upgrade or we need to use Export/extract Content feature in SCCM 2012
    2. How the client migration will happen? Do we need to distribute the 2012 client prior to DP update or we can use client push to upgrade old client.
    3. before share the DP, do i have to remove the MP, PXE role on the 2007 secondary?
    Thanks for your support

    I have already few packages available in that DP that I am going to migrate
    The second shared DP that I want to migrate to 2012, but it is not working.
    Do I need to specify any thing in reassign distribution point wizard, because I only select  the site code where I want to migrate the 2007 DP, and all other option I leave default and client on next.
    This is what I am trying to do.
    I have build a SCCM 2012 Primary and Secondary Server and I am trying to move the DP from exiting SCCM 2007 Secondary Site DP to 2012 Secondary Site.
    I set a source hierarchy for primary server with enable shared DP then I am trying to reassign a DP.

  • Unable to install BR&E Promax license on a SCCM 2007 R2 client

    Unable to install BR&E Promax license on a SCCM 2007 R2 client
    in Execmgr log could see below entries,
    Program exit code -1073741510  in execmgr
    Script for Package:xxxxxx, Program: Install failed with exit code 3221225786

    Unable to install BR&E Promax license on a SCCM 2007 R2 client
    in Execmgr log could see below entries,
    Program exit code -1073741510  in execmgr
    Script for Package:xxxxxx, Program: Install failed with exit code 3221225786
    That error code is from BR&E Promax and not from CM07. You need to contact them to find out what it means.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Since upgrading, both our wireless printers are still visible, but OSX will not connect with them.  Both work via connecting from other sources via the same wireless router (airport).  What do I need to do to get my printing/scanning working again?

    Since upgrading, both our wireless printers are still visible, but OSX will not connect with them.  Both work via connecting from other sources via the same wireless router (airport).  What do I need to do to get my printing/scanning working again?

    First thing to try is reset Printing System:
    OS X Mavericks: Reset the printing system
    Next would be reset the router (power off 15 secs then back on). And, 2 minutes later, reset the printers 1 by 1.

  • Old graphics are still visible after repaint().

    I'm using a sprite which I, in a timer task scheduled at fixed rate, is moved a little bit and the the repaint method is invoked on the canvas which invokes paint on the sprite. Things work fine, the sprite is painted on its new position, however, the graphics painted in the former paint() invocations are still visible on the screen. Is there a sleek way to disable this behaviour?

    i have a similar problem...
    uhm, my sprites have 2 frames, the first one is the sprite pic, and the second is a point, one pixel, so if i select the second one and repaint, it should "disapear", the problem is, i change the selected frame, and then repaint while runnin the thread, but nothing happens =(

  • I have an imap account and deleted all mail from server. Once doing this all emails from my iPad -which was on a wi-fi- where automatically deleted. Fortunately these emails are still visible on my iPhone that was without connection. If I send all these e

    I have an imap account and deleted all mail from server. Once doing this all emails from my iPad -which was on a wi-fi- where automatically deleted. Fortunately these emails are still visible on my iPhone that was without connection. If I send all these emails to my iCloud account - they will remain into my outgoing folder until I open my wi-fi- …BUT will they be sent when I open my wi-fi connection, or since they are no longer on my server… be deleted for ever!?

    This is how IMAP works, if you delete from one device it will also be deleted in the other devices.
    iCloud do not backup e-mails.

  • "Enable distribution-point sharing for this source site" did not showing SCCM 2007 DPs as SCCM 2012 content shares for CM12 clients

    Hi
    We have one central site server and three primary site servers in SCCM 2007 and completed the SCCM 2012 migration as single hierarchy.
    During the migration, We have configured SCCM 2007 Central site server as source hierarchy for data gathering process and configured the "Enable distribution-point sharing for this source site" to make SCCM 2007 distribution points
    as SCCM 2012 content shares to serve SCCM 2012 migrated clients. Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this
    source site" but data gathering process is completing successfully.
    Is anyone have idea, why these SCCM 2007 DPs did not appearing as SCCM 2012 content shares under "Shared Distribution Points"
    Thanks in Advance
    srkr

     Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this source
    site" but data gathering process is completing successfully.
    Earlier all the shared DPs are showing under  Shared Distribution Points ? Or since starting itself these DPs are not showing down? Have you checked migmctrl.log for some clue?
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

  • Migrating MBAM 2.0 Integration from SCCM 2007 R3 to SCCM 2012 R2

    Hello--
    We are preparing to migrate our client base from SCCM 2007 to SCCM 2012 R2. We have MBAM 2.0 integrated with SCCM 2007 and need to know what steps/process is needed to successfully move the integration over to SCCM 2012.
    I know that the .mof files need to be modified, but what else do we need to do? Re-run the SCCM Integration Setup on the MBAM SQL Server and SCCM Server?
    Any help would be much appreciated!
    Thank you!
    Matt

    TPM ownership info is hit or miss. I personally have never had to use it, but I now that we have a few machines that get configured incorrectly and we have to manually initialize and take ownership of the TPM, so that information does not make into MBAM.
    How would we go about moving the DB? I agree that building the new implementation sounds desirable.
    Thanks!
    Matt

  • Can I use SCCM 2007 to deploy SCCM 2012 Agent

    I was reading the scenarios for deploying the SCCM 2012 agent here
    http://technet.microsoft.com/en-us/library/gg682132.aspx
    I have been planning to deploy the 2012 agent using an SCCM 2007 deployment package. I am not migrating any data/packages/collections/anything from SCCM 2007. 
    I am looking for a sane way to deploy 2000ish clients a day for 2 weeks and be done. 
    I figure they are all SCCM 2007 clients so lets deploy 2012 agent using SCCM 2007.
    I read the following in the link above and it sounds like the way I want to go – use SCCM 2007 software distribution…
    Upgrade installation by using application management
    Upgrades clients to a newer version by using Configuration   Manager application management. You can also use Configuration Manager 2007 software  
    distribution to upgrade clients to System Center 2012 Configuration Manager.
    Then later in the same document there is this…
    How to Upgrade Configuration Manager Clients by Using a Package and Program
    You can use Configuration Manager to create and deploy a package and program that upgrades the client software for selected computers in your hierarchy. A package definition file
    is supplied with Configuration Manager that populates the package properties with typically used values. You can customize the behavior of the client installation by specifying additional command line properties.
    You cannot upgrade Configuration Manager 2007 clients to System Center 2012 Configuration Manager by using this method.
    In this scenario, use automatic client upgrade, which automatically creates and deploys a package that contains the latest version of the client.
    What???!??  There is no Automatic client upgrade feature in 2007 – so how does that even make sense?  In one section, it says I can deploy the 2012 Agent using SCCM 2007 software distribution, and then later in the same document, it
    says I can't.  I am probably misunderstanding somthing.
    Is it possible to make a package/program in SCCM 2007 that will make targeted clients upgrade to Agent 2012 and join the new SCCM 2012 Site?

    I tested this (deploying 2012 agent using existing 2007 SCCM infrastructure) with a few test systems at my desk and it seems to work pretty smoothly.  I made a package to deploy SCCM 2012 SP1 and added it to my SCCM 2007 Site.  Then I deployed
    the 2012 agent from 2007 and it worked great.  If it works this well in production, I will be able to migrate all of my clients in less than a weeks time. 
    I have not published the 2012 site information in AD - and I don't plan to.  We would have some overlapping site boundaries - and in 2012 it seems its unnecessary in a single site hierarchy.  I AM planning to use boundaries to assign
    DPs, but thankfully site and DP boundaries have been separated.  It works great to just specify the site in everything and not worry about auto discovery.  My clients don't move among sites since I only have one large site.
    Sorry that I somehow posted this same question twice, and thanks for cleaning that up.
     In my installation, I just called ccmsetup.exe with the following command line...
     /mp:myMP.mydomain.com CCMLOGMAXHISTORY=5 CCMLOGMAXSIZE=1000000 SMSCACHEFLAGS=PERCENTDISKSPACE;NTFSONLY SMSCACHESIZE=10 SMSMP=myMP.mydomain.com SMSSITECODE=CCM
    I am not sure that I need to specify the MP twice, but it is working to do so.  I'm also not sure whether the log and cache flags will be honored since there are existing settings from SCCM2007 agent.  I think that the 2012 install will not change
    these settings upon installation, but it does not appear to hurt the process to include them just in case it does work.

  • Can I go to SCCM 2007 after deploying SCCM 2012?

    About a month ago I deployed SCCM 2012 in my Lab environment. 
    The testing I conduct supports a Security Engineering team.
    I’m running 100 servers, 2003 & 2008 R2, and 40 XP and Win7 Clients (most Win7). 
    After a month of troubleshooting it still will not function correctly. 
    30% of the clients show failed Client Health status, I can’t get the system to auto install via GPO, and of the simple MS updates I’ve pushed, only about 20% clients work.
    I’ve had a ticket with MS open for over a month now on the Client install piece but they have largely ignored me. 
    It’s been two weeks since I spoke with a MS tech, and that was after requesting the case be elevated. 
    After bouncing a few emails back and forth the Tier II Tech has never called me during my work Hrs. 
    8-5 EST.
    Is it possible to install SCCM 2007 once you have expanded the Schema to install SCCM 2012? 
    Absent that I’ll be forced to scrap SCCM and go with WSUS for updates for the short run.
    This issue is starting to really impact production issues and has to get either solved or bypassed.
    Regards,
    Bryan
    Arlington VA

    I'd recommend that you run the Schema Expansion tool that comes with Configuration Manager 2007.
    The reason being is that 2012 has done away with the SLP, meaning that this may or may not be included in it's version of the schema extensions. However, Configuration Manager 2012 does not have anything 'new' in its schema expansion, so you can safely 'downgrade'
    to 2007, but as I said, run the 2007 schema extension tool just in case the SLP attributes are not included in the 2012 schema expansion.
    I am more curious as to the problems you're experiencing with 2012 though, if your having problems with 2012 I don't see how reverting to 2007 will resolve the problems?
    Kriss Milne | MCSE
    *Please click 'Vote As Helpful' or 'Mark as Answer' if a post has helped you or answered your question*

  • SCCM 2007 - All clients from primary site have vanished from central site collections

    Hi all,
    we have a SCCM 2007 R2 setup with one central site, one Primary Site (A) with a secondary site hanging off it and another Primary Site (B). Suddenly all the clients from the Primary Site A (and also it's Secondary Site) have vanished from the central
    site. All the clients are still present when we check Collections from the admin console on Primary Site A site server - they have simply disappeared when we check Collections from the Central Site admin console.
    Can anyone provide any info on a good starting point for troubleshooting this issue? As a sidenote, we can still push packages out to the Primary Site A distribution point and both the Primary and Central site can communicate/ping each other.
    Any help/info would be much appreciated!
    Thanks

    Check the
    site replication on central site, is that SQL is working fine, and also see the
    inbox folder in central site, might be there is backlog and those DDR files are
    not processing, and after maintenance they got deleted.<o:p></o:p>
    please run
    the heartbeat discovery by hour or day, and once the clients will sent all the
    DDR files then they will appears again.<o:p></o:p>
    Sharad Singh | My blogs: SharadTech | Twitter:
    @SinghSharaad | | Please remember to click “Mark as Answer” on the post that helps you.This can be beneficial to other community members reading the thread.

  • Unable to move SCCM 2007 database to SQL 2012 SP1

    Hi ,
    We want to Move
    SCCM 2007 R3 database to SQL Server 2012 SP1.
    SCCM server Version :
    4.00.6487.2000
    Build Number : 6487
    But it says fatal error during the move wizard.
    In ConfigMgrSetup.log it says :
     ***SqlError: [42000][102][Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near '99901'. : SiteControl_ins_upd
    ***SqlError: [42000][102][Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near '99901'. : SiteControl_ins_upd
    I already installed following updates on SCCM server , but still it failed to move.
     2676737 
     2676776 

    This would be manual process. The simplest way to fix them is to reinstall the reporting point.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Local files that are not there are still visible

    In my local files I can still see some albums that are no longer on my Macbook but strangly enough I can still see them??I can even push play, but (of course) nothing happens when I do this.I would like to erase these albums or not see them but how?? In my preferences I have switched off al the local/iTunes tracks etc so I don't see anything else, but they are still there......????See attachment for the "off line tracks" (that don't exist) and my settings

    I have the same problem, but a removal and fresh install of the application did not resolve the issue. My original issue - which may be related - is that Spotify will not play some songs.  I'm guessing it wants to play a local file instead of a cloud file by default.  Somewhere along the way, the local filie (on a network drive) was not available.  Then, when I try to play the song in any location, it will not play, move the scrobbly bar. nothing. I have thus far...* Deselected the local files in the app preferences* Removed the storage folder / 'cache' of local files* Removed the application* Reinstalled the application As the OP says and shows, my local files still appear in the list with no option to remove.  Oh, and they won't play either.

Maybe you are looking for