SCCM 2007 R2 Copying the sms setup log files ( C:\ConfigMgr*.lo*) failed.

Copying the sms setup log files ( C:\ConfigMgr*.lo*) failed.
Copying setup logs failed...
Backup task completed successfully with zero errors but there could be some warnings, AFTERBACKUP.BAT will be started if available in its predefined location

Just for the record!
Check the permission of the folders SCCMBkp$ and SCCMBkpArch$, compare with a server that is working. Alfter that restart the services: (SMS_SITE_VSS_WRITER and SQL Server VSS Writer). Then Open the Smsbkup.log and restart the SMS_SITE_BACKUP and check the
logs to see if works.

Similar Messages

  • One or more required office component failed to complete successfully for more information, consult the setup log file. while uninstallation of sharepoint 2013

    One or more required office component failed to complete successfully for more information, consult the setup log file. while uninstallation of sharepoint 2013

    go to start > run > type %temp% > here check for latest file and provide us details in that log file
    If this helped you resolve your issue, please mark it Answered

  • Windows 8 installation error: "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."

    I recently tried testing Server 2012 for installation and I had a major issue.  Windows 8 also uses the same method for installation so this should also apply to Windows 8.  I thought this might be helpful for other people who have the same
    problem.  My setup is a 1U server with no DVD drive, no hard drives, and only USB.  I have a new hard drive that I wanted to install Server onto, so I put it in and ran the installer off a thumb drive.  I kept receiving the following error when
    I tried to format the hard drive and proceed with the installation:
    "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."
    After hours of troubleshooting, I determined my problem was I was using a thumb drive to install it, and Windows didn't like it.  Some people had similar issues when similar devices were plugged in (i.e. external hard drives, SD cards, CF cards, etc). 
    In my case, it was the installation drive itself was a thumb drive.  I ended up digging up an external DVD drive and placed the installation onto a DVD.  Worked flawlessly.  Now I am up and running.
    I tried
    the steps here to no avail.
    Hope this helps anyone else with the same problems.

    Hi,
    Thanks for sharing. We really appreciate your time and efforts. Hope your experience will help other community members facing similar problems.
    Leo Huang
    TechNet Community Support

  • SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

    SQL Server 2012 Developer Edition will not install.  Setup files don't even get copied completely.  Win 8.1.  ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

    Hello,
    I am glad it worked.
    Thank you for visiting MSDN forums!
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • How can I copy the SMS from my Nokia 6303 to a Sam...

    Hello everybody!
    I just bought a Samsung Galaxy S4 mini...and I find such a pity to lose all the SMS that I had in my Nokia 6303. The new phone is sim-locked so unfortunately I cannot copy the SMS that way.
    Does anyone know if there is a possibility to move the SMS from one phone to the other?
    Many thanks in advance!
    Cheerio

    Hi, olgadapolga. For the SMS that you do not want to lose, you can create a backup on your PC using this link: http://www.microsoft.com/en-ph/mobile/support/nokia-suite-compatibility/. Note that this link will work regardless of your location. About transferring SMS to another phone, see if there's an option on your Nokia 6303 to create a backup on an SD card. If so, you can proceed with backing up your SMS. Try inserting the SD card in your other phone and check for restoring option. However, if restore is not available there is a possibility that the other phone doesn't support the backed up messages file format. For added assistance, feel free to post it here.

  • How to correct the corrupted archive log files?

    Friends,
    Our restore method is cloning type.
    today i fired this statement(this is one is usually do for the restore) "recover database until cancel using backup controlfile"
    i have 60 files in the archive folder.
    it executs only 50 files when it comes to 51st file it came out and says could not copy the file.
    is that particular file is corrupted?
    or is there any restriction in copying no of archivelog files? i mean only 60 files like that.....
    suppose if the archive file is corrupted how can i correct it?
    thanks
    sathyguy

    Now, this is the error message....
    ORA-00310: archived log contains sequence 17480; sequence 17481 required
    ORA-00334 archived log; '/archive2/OURDB/archive/ar0000017481.arc'i googled....and find out.....
    ORA-00310 archived log contains sequence string; sequence string required
    Cause: The archived log is out of sequence, probably because it is corrupted or
    the wrong redo log file name was specified during recovery.
    Action: Specify the correct redo log file and then retry the operation.so...from the above error messages.....i think the particular archive file(17481) is corrupted. now can i correct this corrupted archive file.
    According to the above action, it says to specify the correct redo log file. if the file is not corrupted then where should i specify the redo log file's path?
    thanks
    sathyguy

  • Setup log file Critical errors

    if i start the setup it says Critical Errors Found In Setup Please See The Setup Log.File For Details

    You need to provide the logs and tell us more about your system. Please refer to this page for info on where to find the logs (in the CS5 section).#
    Mylenium

  • Critical errors were found in setup. Please see setup log file for details.

    What fixes this problem in IE? I have read a lot of forums with many replies saying they got by it, but they never explain how. One guy posted a link, but the link is dead now.
    I need to know how to fix this problem. Only thing I can gather is its a Java issue, but my java is up to date. In fact I just reinstalled it make sure that it was updated.
    With as many people having this issue I can't believe I have not found something from Adobe on this issue.
    Regards,
    Scott

    I run the setup file and it does the checking system process... then goes into the actual install menu and not more than 10 seconds into that 2nd menu I get "critical errors were found in setup. Please see setup log file for details". That is all I can get out of the install.
    The message window that I get the error in indicates windows Internet Explorer.
    That is the my entire process. I have searched and found the log file and I have looked through it, but I am having a hard time finding the actual cause of the error. Out of shear frustration I removed all my adobe products and tried the install again and had the same exact problem. So I know there is something stopping me some where... just don't know what it could be.
    Thanks,
    Scott =

  • Brarchive help - regrading the arch SID .log file ...

    Hi all,
    Recently, I have a disk filling up fast problem on the archivelog directory, so I have to do the following:
    01 - move some files to a temporary directory
    02 - run brarchive - SUCCESFUL with warnings due to the archivelogs that I moved
    03 - return some of the files that I moved to the original archivelog directory
    04 - make a copy of arch<SID>.log as arch<SID>.log.01
    05 - modify the arch<SID>.log file to start backing up from the files that I returned to its original directory
    06 - run brarchive again - SUCCESSFUL with warnings due to archivelogs that I moved and have not returned to the original directory
    07 - repeat the process from step 03 until all archivelogs has been backed up
    NOTE:
    - For step 04, I rename arch<SID>.log to arch<SID>.log.02 on the second run, arch<SID>.log.03 on its 3rd run and so on and so forth.
    Now after all is said and done, I end up with several files names arch<SID>.log.01, arch<SID>.log.02 .... arch<SID>.log.NN and arch<SID>.log.
    I want to know if anyone knows how I can combine all these files into one new arch<SID>.log file. Reason being is that some of the missing archivelogs that are reported in arch<SID>.log has actually already been backed up but are not recorded in the most recent arch<SID>.log file.
    I just discovered that I need to do this, otherwise brrestore will complain that the file to restore is not found because it is not in the most recent arch<SID>.log file.  Or maybe, is there a way to tell brrestore what arch<SID>.log file to use? That is, can I run brrestore and tell it to use arch<SID.log.01?
    Any feedback will be very much appreciated. Thanks in advance.

    This post has been duplicated, can't see the option to delete a thread so mark it as answered instead.

  • How can I copy the whole directory of files from PC to iPad?

    How can I copy the whole directory of files from PC to iPad ?

    Get an app that reads PDF's, such as iBooks or GoodReader or Readdle Docs, then use the file transfer part of iTUnes to get those files to your iPad, through iTunes. ( I have no experience with goodreader, but with ReaddleDocs you can move the files, then create folders to put them in to keep them organized)

  • Moving the online redo log files to different location

    We just installed few more drives into our sandbox system and I want to move the online redo log files for better performance.  We've got the SAPARCH directory moved to a different location. 
    Does anyone know how/where I can change the parameters so redo log files are pointed at different drives?  It's not in the <b>init<SID>.ora</b> file...
    Regards,
    Sumit

    Hi Sumit,
    The following link contains information about moving the redo logs:
    http://www.stanford.edu/dept/itss/docs/oracle/9i/server.920/a96521/onlineredo.htm
    Best regards,
    Alwin

  • NImax.exe has generated errors. You must restart the program, a log file is being created.

    NImax.exe has generated errors. You must restart the program, a log file is
    being created.
    This error occurs just after bootup, no programs started except windows..
    Running Windows 2000 latest version on a brand new computer.
    (pent 4 3.0 ghz 500MB ram).
    Can anyone help me with this problem? Happened after install Labview 7.0
    express. Installed twice and same problem occured with both installs.
    Labview 7.0 is the only thing installed right now. Also selected "Visual
    Basic Support" install from driver cd's.
    One other thing I just noticed. System info reports 2 processors and I
    think I only have one.
    TIA

    Happy update.
    After ignoring this problem for awhile and installing some NI DAQ boards,
    this problem is not happening anymore.
    Would urge NI to investigate further though. Messed me up for a couple of
    days, and still don't know why it happened.
    Much thanks to those who helped.
    JJ
    "JJF" wrote in message
    news:qB6Hb.48702$VB2.90660@attbi_s51...
    > One other point, I found out this is a message generated by drwtsn32. Can
    > get rid of the error by unchecking "show visual feedback on errors" box,
    but
    > don't like that fix. Still need help.
    >
    > Thanks,
    >
    > JJ
    >
    > "JJF" wrote in message
    > news:%JRGb.138921$8y1.419649@attbi_s52...
    > > Hi Nirmal and all,
    > >
    > > Happy Holidays to you too, and thanks for the reply.
    > >
    > > Making progress. Did all the uninstalling and registry editing as you
    > > suggested. Also, updated Win2K at Microsoft.com as suggested.
    > > Re-installed with default settings of LV express 7.0. Now I only get
    > the
    > > error when I exit NImax.
    > >
    > > Also, my p2p home network is not that hot. Have it set up as a
    workgroup.
    > > Sometimes when I boot up I have file access between the two computers
    and
    > > sometimes windows explorer can't find the workgroup network path
    (between
    > > the two computers). Both computers can always access the internet
    though.
    > > Using a 4 port Linksys cable/dsl router on a cable modem. Using XP
    home
    > > edition on base computer (the one set up for the isp) and Win2K on the
    > other
    > > computer.
    > >
    > > Also, any idea where this log file is going? Thought it was part of the
    > > event viewer but the errors in the event viewer don't seem to correspond
    > to
    > > the NImax.exe logging event now. There is a file in
    > > "winnt\sytem32\config\software.log" that seems to change at about the
    same
    > > time but I can't access the file because it is in use by the system.
    > >
    > > Using NImax ver 3.02.3005. Do you know if I can download "NI
    measurement
    > > and automation explorer" and/or the driver cd's from NI.com? Maybe I
    have
    > a
    > > flaky disk or something. I have a feeling it may also have to do with
    the
    > > "on again/off again" network neighborhood connection problem.
    > >
    > >
    > > Thanks again,
    > >
    > > JJ
    > >
    > >
    > >
    > > "Nirmal Sharma" wrote in message
    > > news:506500000005000000AE470100-1068850981000@exch​ange.ni.com...
    > > > Hi,
    > > > Happy cristmas & new year for you & ur brand new pc...
    > > >
    > > > How are you uninstalling & then installing LV in your pc ?
    > > >
    > > > I suggest to remove complete LV (Remove All option) from your
    > > > computer. Once uninstallation is completed, go to windows registry -
    > > > by windows start -> run -> regedit -> Enter
    > > >
    > > > Goto HKEY_LOCAL_MACHINE-> SOFTWARE -> National Instruments - Delete
    > > > this folder (National Instruments folder)
    > > >
    > > > Remove any other foloder/file related to NI's software. Be very
    > > > cautious while deleting files from windows registry bcoz wrong file
    > > > deletion may hang your whole system.
    > > >
    > > > Restart your computer..hope it should bootup without any errors.
    > > >
    > > > Now as answered by Alexander, update windows.
    > > >
    > > > After updating, bootup your system. If it boots up without any error
    > > > message, install LV with the typical (default installation).
    > > >
    > > > Hope this helps. Your feedbacks are welcome.
    > > >
    > > > Best Regards,
    > > > Nirmal Sharma
    > > > India
    > >
    > >
    >
    >

  • What determines the location of the shared services log files

    I've just completed an install and configuration of Shared Services 9.2.1. The shared services log files, SharedServices_Security.log, SharedServices_Admin.log, etc., are being written to the C:\WINDOWS\system32\null\logs\SharedServices9 path. These files should be written to the Tomcat application folders in the Shared Services home, CSS_HOME, folder. e.g. d:\hyperion\sharedservices\9.2\appserver\installedapps\tomcat\5.0.28. This is according to the Shared Services installation documentation.
    Is there any way to get these log files written to the d: drive? The following references sharedservices.logdir from the hsslogger.properties file but I don't see where a value is set that I can change.
    log4j.appender.FILE.File=${sharedservices.logdir}${file.separator}SharedServices_Security.log
    Thanks,
    Tom

    Hi there!
    Are you looking for the AOM log file?
    By default it´s located at:
    SIEBEL_ROOT\ENTERPRISE\SIEBEL_SERVER\log
    If you can´t find the AOM log files here, try to check the "Log directory" server parameter value.
    Best regards,
    João Paulo

  • Change the Data and Log file locations in livecache

    Hi
    We have installed livecache in unix systems in the /sapdb mount directory where the installer have created sapdata and sapdblog directories. But the unix team has already created two mount direcotries as follows:
    /sapdb/LC1/lvcdata and /sapdb/LC1/lvclog mount points.
    While installing livecache we had selected this locations for creating the DATA and LOG volumes. Now they are asking to move the DATA and LOG volumes created in sapdata and saplog directories to these mount points. How to move the data and log file and make the database consistent. Is there any procedure to move the files to the mount point directories and change the pointers of livecahce to these locations.
    regards
    bala

    Hi Lars
    Thanks for the link. I will try it and let u know.
    But this is livecache (even it uses MaxDB ) database which was created by
    sapinst and morover is there any thing to be adjusted in SCM and as well as
    any modification ot be done in db level.
    regards
    bala

  • The SiteLog_ appl_name .log  file in  $ORACLE_HOME/j2ee/log is not created

    Hello experts,
    The SiteLog_<appl_name>.log file in the $ORACLE_HOME/j2ee/log directory stopped to be created 2 days ago.
    No errors.
    Which reason can be for that? How to enable creating this file?
    Regards,
    Ram

    Hi,
    Are there any error when login OWA or ECP?
    As Ed mentioned, please post specific information about your question for further troubleshooting.
    Besides, please check to see if there is a SharedWebConfig.Config file in the following directories:
    <install drive>\Program Files\Microsoft\Exchange Server\V15\ClientAccess
    <install drive>\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy
    Also, here’s an thread about miss this file in relevant location. For your reference:
    https://social.technet.microsoft.com/Forums/office/en-US/6699ad92-701d-4966-b202-90c9be6bf735/exchange-2013-cu6-event-id-1003?forum=exchangesvrgeneral
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

Maybe you are looking for