SCCM 2007 - Report for installed instances of IE11

As IE11 is now an OS feature that is ether enabled or disabled, and it is no longer an installed application that would show up in the classic 'Add/Remove Programs' data, how does one go about reporting on it VIA SCCM?
On a Win7 device with IE11 installed, if you go into the Control Panel and then into 'Programs and Features' you will NOT see Internet Explorer listed. However if launch 'Turn Windows Features on or off' you will find Internet Explorer 11 listed as
an enabled feature (checkbox is checked).
Thus if I design an SCCM report to query the 'Add/Remove Programs' data which is the 'Programs and Features' data, I do not find any results for Internet Explorer 11. Hence the question, what is the measure to query a workstation inventory to reliably
determine which version (if any) of Internet Explorer is installed?

See this post:
http://myitforum.com/myitforumwp/2014/05/19/internet-explorer-version-information-via-hardware-inventory/
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum

Similar Messages

SCCM 2012 Report for Software registered in Add/Remove programs

Hi
Am looking to create an SCCM 2012 Report for Software registered in Add/Remove programs on windows 7 machines but dont have enough experience with report builder to do this.
Was hoping someone could help.

When i use the url i still only see the following categories
Administrative Security
Asset Intelligence
Client Push
Client Status
Compliance and Settings ManagementHave looked through them all and that one is not there
the only software ones are the following
Report Software 01A - Summary of installed software in a specific collectionThis report provides a summary of installed software ordered by the number of instances found from inventory.
Open Menu
Report Software 02A - Product families for a specific collectionThis report lists the product families and the count of software in the family for a specific collection.
Open Menu
Report Software 02B - Product categories for a specific product familyThis report lists the product categories in a specific product family and the count of software within the category. This report is linked to Software 02C - Software in a specific product
family and category.
Open Menu
Report Software 02C - Software in a specific product family and categoryThis report lists all software that is in the specified product family and category. This report is linked to Software 06B - Software by product name.
Open Menu
Report Software 02D - Computers with specific software installedThis report lists all computers with specific software installed. This report is linked to Software 02E - Installed software on a specific computer .
Open Menu
Report Software 02E - Installed software on a specific computerThis report lists all software installed on a specific computer.
Open Menu
Report Software 03A - Uncategorized softwareThis report lists the software that is either categorized as unknown or has no categorization.
Open Menu
Report Software 04A - Software configured to automatically run on computersDisplays a list of software configured to automatically run on computers.
Open Menu
Report Software 04B - Computers with specific software configured to automatically runDisplays all computers with specific software configured to automatically run.
Open Menu
Report Software 04C - Software configured to automatically run on a specific computerDisplays installed software configured to automatically run on a specific computer.
Open Menu
Report Software 05A - Browser Helper ObjectsThis report displays the Browser Helper Objects installed on computers in a specific collection.
Open Menu
Report Software 05B - Computers with a specific Browser Helper ObjectDisplays all of the computers with a specific Browser Helper Object.
Open Menu
Report Software 05C - Browser Helper Objects on a specific computerDisplays all Browser Helper Objects on the specific computer.
Open Menu
Report Software 06A - Search for installed softwareThis report provides a summary of installed software ordered by the number of instances based on search criteria for the product name, publisher, or version.
Open Menu
Report Software 06B - Software by product nameThis report provides a summary of installed software ordered by the number of instances based on selected Product Name.
Open Menu
Report Software 07A - Recently used executable programs by the count of computersThis report displays executable programs that have been used recently with a count of computers on which they have been used. The Software Metering client must be enabled for this
site to view this report.
Open Menu
Report Software 07B - Computers that recently used a specified executable programThis report displays the computers on which a specified executable program has recently been used when you enable the software metering client setting.
Open Menu
Report Software 07C - Recently used executable programs on a specified computerThis report displays executables that have been used recently on a specified computer when you enable the software metering client setting.
Open Menu
Report Software 08A - Recently used executable programs by the count of usersThis report displays executable programs that have been used recently with a count of users that have most recently used them when you enable the software metering client setting.
Open Menu
Report Software 08B - Users that recently used a specified executable programThis report displays the users that have most recently used a specified executable program when you enable the software metering client setting.
Open Menu
Report Software 08C - Recently used executable programs by a specified userThis report displays executable programs that have been used recently by a specified user when you enable the software metering client setting.
Open Menu
Report Software 09A - Infrequently used softwareThis report displays software titles that have not been used during a specified period of time. You can specify a value that will represent the number of days that have elapsed since the last use (e.g. if you
enter 90 days, you will see software that was not used in the past 90 days or more). You can also leave the Days not used field empty to see all software titles that were never used.
Open Menu
Report Software 09B - Computers with infrequently used software installedThis report displays computers which have software installed that has not been used for a specified period of time. The specified period of time is based on the value specified in the
'Software 09A - Infrequently used software' report.
Open Menu
Report Software 10A - Software titles with specific multiple custom labels definedThis report allows you to view software titles based on matching of all selected custom label criteria. Up to three custom labels can be selected to refine a software title search.
Open Menu
Report Software 10B - Computers with a specific custom-labeled software title installedThis report shows all computers in this collection, that have the specified custom-labeled software title installed.
Open Menu
Report Software 11A - Software titles with a specific custom label definedThis report allows you to view software titles based on matching of at least one of the selected custom label criteria.
Open Menu
Report Software 12A - Software titles without a custom labelThis report displays all software titles that do not have a custom label defined.
Open Menu
Report Software 14A - Search for software identification tag enabled softwareThis report provides the count of installed software with a software identification tag enabled.
Open Menu
Report Software 14B - Computers with specific software identification tag enabled software installedThis report lists all computers that have installed software with a specific software identification tag enabled.
Open Menu
Report Software 14C - Installed software identification tag enabled software on a specific computerThis report lists all installed software with a specific software identification tag enabled on a specific computer.
Open Menu

Two earlywatch reports for same instance in one Solution manager

Hi
i am trying to create two solutons for early watch reports for same instance. let me explain here.
In SAP Solution Manager: Active Solutions >>> i have two solutions like this
Solution                                                          Early Watch Alert Reports
Avnet Global Solutions         >>>> here i have configured the PR1, PB1 PCB instances
PR1                                      >>>>>here i configured the only PR1 instance.
so i have configured the same instance in two solutions.
i am not gettting the early watch report automatically after after configuring like this . but manually working fine.
when i kick of the report manually working fine.
here my question is ... do i can create two early watch reports in one solution manage for same instance or not. if yes then why i am not getting report automatically.
Thank you
Vish

Dear Paul,
Thank you for your response
this is what i got from SAP.
Hello Vish,
You can have the same system in different solutions. With regards
to why the report is not generating automatically, please review
SDCCN on the satellite system.
I dialed into the system and found that the SDCCN for PB1 is not
downloading the sessions from Solution Manager.
I would recommend that you deactivate and then activate SDCCN.
Tcode SDCCN -> GoTo - Settings - Task Processor - Deactivate
Tcode SDCCN ->Utilities -> Activate
Then create a Refresh Session task and verify if the upcoming sessions
are getting pulled down to PB1.
If you need help with this, please let me know if it is fine with you
if I make the necessary changes to get the system working.
Thank you in advance and best regards,
Jared Singh
SAP Active Global Support - Netweaver Web Application Server
could i know your comment

Unable to view SCCM 2007 reporting page.

unable to view sccm 2007 reporting page it's showng blank.

It is working fine now issue was with the internet explorer and proxy. Thanks to all.

Need a SCCM SQL Query Report for Installed Software with Packages and Applications.

I need a report that will show the number of installs of all of the workstations applications and packages over a given period of time.
This will let us know how effective our deployments are and how well the on-demand software is being adopted.
Any help?

Your Install Source might be an option as most SCCM deployments will install from C:\Windows\ccmcache\xx [where xx is a random folder name]. Most software vendors will put an install source in the registry, but not all do, so it won't be completely accurate.
When software is installed manually, the install source path won't be C:\Windows\ccmcache\xx.
Here is a SQL query I have for Install Source:
SELECT v_GS_COMPUTER_SYSTEM.Name0 as 'Computer Name', v_GS_INSTALLED_SOFTWARE.ProductName0 as 'Software Title', v_GS_INSTALLED_SOFTWARE.InstallSource0 as 'Install Source', v_GS_INSTALLED_SOFTWARE.ProductVersion0 as 'Version', v_GS_INSTALLED_SOFTWARE.InstalledLocation0
as 'Installed Location', v_GS_INSTALLED_SOFTWARE.InstallDate0 as 'Install Date'
FROM v_GS_COMPUTER_SYSTEM INNER JOIN v_GS_INSTALLED_SOFTWARE ON v_GS_COMPUTER_SYSTEM.ResourceID = v_GS_INSTALLED_SOFTWARE.ResourceID
WHERE v_GS_INSTALLED_SOFTWARE.ProductName0 like '%Office 365 Pro%'
ORDER BY v_GS_COMPUTER_SYSTEM.Name0

SCCM 2012 report for all versions on MS lync installed

Hello,
I have installed Microsoft Lync 2010 and Lync 2013 on computers in my company and I have different versions
like 32 and 64 bits, 365 etc I want to make query in SCCM 2012 to tell me the total number of Microsoft Lync clients Installed on win 8 machines in my company, is there a best way to do this I need your advice..
I have tried various built in reports and not been successful so far.
Thanks in Advance

There's a thread already explaining this :
http://social.technet.microsoft.com/Forums/en-US/f16f1ee8-206c-42a1-af0e-0363c51b840c/how-to-know-total-of-microsoft-lync-installed-on-computers-in-sccm-2012?forum=configmanagergeneral
Benoit Lecours | Blog: System Center Dudes

Sccm 2012 reporting services server instance blank

Hi guys,
Can anyone provide me tips to install reporting service point on SCCM 2012 server.
P.S: SRS instance configured in SQL server 2008 R2 SP2 and it can accessible (http://<SQLserver>/Reports/) in SCCM 2012 server
Please help me!
Thanks,

If you don't have DNS entry for your Report Service Point (SQL server), the instance field can be blank too.
Can you expand on this as I have never heard of this issue before.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 Reporting point server instance blank

I have installed SCCM 2012 With remote SQL database server successfully, at the time of Reporting service point role installation, its verified the SCCm database successfully but SQL server service instance is blank, what would be the reason....
Below my SCCM architecture:
1. Created one Database in Remote server SQL server is in failover cluster active passive mode
2. Configured Reporting services in active mode.
3. at the time of reporting point role installed failover cluster database name given and its successfully verified with SCCM_123 database.
4. on the instance name showing blank.
Please help me if anyone facing this type of problem.
Thanks in advance.
Rishi!!
Regards, Rishi

It is not totally intuitive when installing the Reporting Point role with a cluster. When installing a Failover Cluster, SSRS can only get put on one node or on its own box, as it uses NLB for scale-out not FoC. SSRS is also not configured by
default if you use it with a clustered SQL instance, so you have to open SSRS Configuration Tool and make sure the ReportServerDB is created, and that the URLs can be browsed. Once that is done, then try adding it in CfgMgr:
In CfgMgr, In the Administration workspace, expand Site Configuration, and then click
Servers and Site System Roles.
Select the node that has SSRS installed on it (not the Failover Cluster virtual computer account). If SSRS is on its own box, first you have to go to
New site system and add the SSRS box.
Then, on the Home tab, in the Server group, click
Add Site System Role. The Add Site System Roles Wizard opens. Choose Reporting Point, and after verifying the connection to the CfgMgr DB, the instance name should populate.
http://technet.microsoft.com/en-us/library/gg712698#BKMK_InstallReportingServicesPoint
http://social.technet.microsoft.com/Forums/en-HK/configmanagerdeployment/thread/390a6ea8-8a24-47d0-b6ad-2e1063bbc72d

SCCM 2007 Reports - Machines with IE9 AND IE10

hi,
I need a report with machines with IE9 and IE 10.
Thanks,
AK

Hi,
Check out this report that will get you started..
http://eskonr.com/2010/04/sccm-reportcollection-for-computers-with-internet-explorer-with-different-versions/
Regardsm
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2007 client not install

Dear Exprt,
Please assist me to install client, this my first setup i had followed all guide line but could not success.
in SCCM admin console client discover but client not getting install according to log error i had follow some internet provided steps however still not success, i dont know were i made mistake for server installation.
Kind request for your usual support...
In text:
<![LOG[MPs:]LOG]!><time="05:59:35.906+-180" date="02-03-2014" component="ccmsetup" context="" type="1" thread="2128" file="ccmsetup.cpp:4527">
<![LOG[ SCCMSRV.SCCM-AD.COM]LOG]!><time="05:59:35.906+-180" date="02-03-2014" component="ccmsetup" context=""
type="1" thread="2128" file="ccmsetup.cpp:4542">
<![LOG[Updated security on object C:\Windows\system32\ccmsetup\.]LOG]!><time="05:59:35.906+-180" date="02-03-2014" component="ccmsetup" context="" type="0" thread="2128" file="ccmsetup.cpp:8849">
<![LOG[Sending Fallback Status Point message, STATEID='100'.]LOG]!><time="05:59:35.906+-180" date="02-03-2014" component="ccmsetup" context="" type="1" thread="2128" file="ccmsetup.cpp:9326">
<![LOG[State message with TopicType 800 and TopicId {3F0B6515-0505-4DF2-881C-F4A358589302} has been sent to the FSP]LOG]!><time="05:59:36.183+-180" date="02-03-2014" component="FSPStateMessage" context=""
type="1" thread="2128" file="fsputillib.cpp:730">
<![LOG[Running as user "SYSTEM"]LOG]!><time="05:59:36.183+-180" date="02-03-2014" component="ccmsetup" context="" type="1" thread="4004" file="ccmsetup.cpp:2690">
<![LOG[Detected 53138 MB free disk space on system drive.]LOG]!><time="05:59:36.183+-180" date="02-03-2014" component="ccmsetup" context="" type="1" thread="4004" file="ccmsetup.cpp:463">
<![LOG[DetectWindowsEmbeddedFBWF() Detecting OS Version]LOG]!><time="05:59:36.183+-180" date="02-03-2014" component="ccmsetup" context="" type="1" thread="4004" file="ccmsetup.cpp:509">
<![LOG[Client OS Version is 6.1, Service Pack Version 0]LOG]!><time="05:59:36.183+-180" date="02-03-2014" component="ccmsetup" context="" type="1" thread="4004" file="ccmsetup.cpp:533">
<![LOG[Client OS is not a supported Windows Embedded Platform]LOG]!><time="05:59:36.183+-180" date="02-03-2014" component="ccmsetup" context="" type="1" thread="4004" file="ccmsetup.cpp:535">
<![LOG[Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.]LOG]!><time="05:59:36.183+-180" date="02-03-2014" component="ccmsetup" context=""
type="1" thread="4004" file="ccmsetup.cpp:2774">
<![LOG[Successfully ran BITS check.]LOG]!><time="05:59:36.937+-180" date="02-03-2014" component="ccmsetup" context="" type="1" thread="4004" file="ccmsetup.cpp:7105">
<![LOG[Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 404)]LOG]!><time="05:59:36.968+-180" date="02-03-2014" component="ccmsetup" context="" type="3" thread="4004"
file="ccmsetup.cpp:5969">
<![LOG[Sending Fallback Status Point message, STATEID='308'.]LOG]!><time="05:59:36.968+-180" date="02-03-2014" component="ccmsetup" context="" type="1" thread="4004" file="ccmsetup.cpp:9326">
<![LOG[State message with TopicType 800 and TopicId {BED7FDFE-DBD7-48F5-853A-A81A87AEED84} has been sent to the FSP]LOG]!><time="05:59:36.984+-180" date="02-03-2014" component="FSPStateMessage" context=""
type="1" thread="4004" file="fsputillib.cpp:730">
[email protected]

"Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 404)"
Is you MP healthy? Based on this message, it is not.
Jason | http://blog.configmgrftw.com

SCCM collection report for software NOT on a workstation

One of the default reports in SCCM generates a report on the number of software titles in a collection using 2 prompts(Collections, Software Title)
SELECT DisplayName0, Count(ProdID0) AS 'Green', Publisher0, Version0, @CollID as CollectionID
FROM v_Add_Remove_Programs arp
JOIN v_FullCollectionMembership fcm on arp.ResourceID=fcm.ResourceID
WHERE ((Publisher0 = @softwarename) OR (DisplayName0 = @softwarename) )
and fcm.CollectionID=@CollID
GROUP BY DisplayName0, Publisher0, Version0
ORDER BY Publisher0, Version0
The following lists all collections with the total membership.
SELECT @CollID.Name, v_Collection.Comment,v_Collection.CollectionID, COUNT(*) as [Members] FROM v_Collection,v_FullCollectionMembership
where v_Collection.CollectionID=v_FullCollectionMembership.CollectionID
group by v_Collection.Name ,v_Collection.Comment,v_Collection.CollectionID
order by v_Collection.Name
How can we get the total membership from the collection prompt in the top statemenent and subtract the "Count(ProdID0)" to get the number of computers without the software title?

i dont understand your question completely.why do you want to subtract the count(prodID) from total membership of collection ? you know that ,count(prodID) and count membership(collection) are two complete different things and they are not related at all.
can you please be more specific ,what you are trying to achieve ?
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr

SCCM 2012: report for inventory of different hardware types?

Hi,
Is there a default report which shows how much of each model (vendor, type, f.e. 24 Dell Lenovo, 80 Dell ...) we have in our company?
J.
Jan Hoedt

Hi Jan
I have used this SQL Query when I am doing projects to get an overview of models by manufactor.
select
GSCS.Manufacturer0 as [Manufacturer],
GSCS.Model0 as [Model],
count(*) as [Count]
from v_R_System RS
left join v_GS_COMPUTER_SYSTEM GSCS on RS.ResourceID = GSCS.ResourceID
Group by GSCS.Model0, GSCS.Manufacturer0
Order by GSCS.Model0
It is not a report in itself, but If you create a new empty report in ConfigMgr 2012 and open it with Report builder, you can use this query to built a very basic "Count Hardware Models by Manufactor".
But I think it will give you the information you are looking for.

SCCM 2007 not automatically install updates when deadline expires

Hi
I planned a sccm patching.
Clients downloaded correctly the updates but when deadline expires they not automatically install the updates
Why?
regards
Christian

Since you have not posted any logs, I had to guess, and I will say this is due to maintenance windows.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Packaging IE 9 in SCCM 2007 using silent install switches

Hello all
I am planning on packaging IE9 to be deployed to some of our test computers then to our production environment of about 564 nodes. My goal is to run it as a silent install, no user interface.I use the follow commands but the Install box still comes up (see
below). msiexec.exe /i "ie9-windows7-x64-enu.msi" /quiet
My other question is should I just push the upgraded IE9 with the next software updates patch cycle?
Thanks,
Phil
Phil Balderos

Hi Phil,
when you run through the IEAK wizard, you choose the user experience you want to have.
IEAK has the ability to output in MSIfile, or as setup.exe.
The MSIfile, is a dumb one, in that it merely unpacks the setup.exe and launches that.
When we packaged up IE9, we just used the setup.exe, and I selected silent+norestart and all that, inside the IEAK.
The setup.exe generated, includes the necessary parameters. I created a package/program in CM07 with just that.
Or, you can use: setup.exe /quiet /norestart
I've not found the MSI of any benefit at all, ever. (maybe if I was using GPSI or something that might be where I'd use it)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

SCCM 2007 query for workstations with client status 1 and o

Hi everybody,
I would like to write a sql query which gives me workstations with status 1 if the client is installed and active and 0 if the client is not active.Any help please?
Thank you.
Regards,
Lebalbo

Here you go.
Select * from v_r_system R
where R.client0 =1 and R.active0=0
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2007 - Report for installed instances of IE11

Similar Messages

Maybe you are looking for