SCCM 2007 Secondary server IIS issue

Hi Team,
Our environment is Native mode SCCM 2007 R2 .
One of the secondary server causing IIS issue now previously working fine. When I checked MP it's Working. Checked MP controller log and getting 200 OK message.
Successfully performed Management Point availability check against local computer.
Call to HttpSendRequestSync succeeded for port 443 with status code 200, text: OK
Http test request succeeded.
Checked IIS log and getting like below errors
2014-10-17 14:31:08 10.3.80.131 CCM_POST /ccm_system/request - 443 - 10.3.82.20 ccmhttp 500 0 64 249
2014-10-17 14:31:11 10.3.80.131 CCM_POST /ccm_system/request - 443 - 10.3.82.15 ccmhttp 500 0 64 249
2014-10-17 14:31:17 10.3.80.131 CCM_POST /ccm_system/request - 443 - 10.3.82.16 ccmhttp 500 0 64 249
Certificate is valid. and Binding done correctly 
Kindly help me to resolve.

In that case you left with no option may be an IIS re-install required on the server.
I would check is it hosting any other role on the server if not then good to go with the IIS re-install.
Kamala kannan.c| Please remember to click “Mark as Answer” or Vote as Helpful if its helpful for you. |Disclaimer: This posting is provided with no warranties and confers no rights

Similar Messages

  • Patches not visible in SCCM 2007 Site server even after approving the patches in WSUS

    Hi,
    The patches are not appearing in SCCM 2007 site server after approving the same patches in WSUS.
    Below are the patches.
    MS14-080: Cumulative Security Update for Internet Explorer - Windows Server 2008 SP2 - IE 7 - KB3008923 [23,186.1]
    MS14-018: Cumulative Security Update for Internet Explorer - IE 11 - KB2929437 - Windows Server 2008 R2 SP1 (x64) [4,32.4]
    MS14-066: Vulnerability in Schannel Could Allow Remote Code Execution - Windows Server 2008 SP2 - KB2992611 (x64) - V2 [1,8.3]
    MS14-038: Vulnerability in Windows Journal Could Allow Remote Code Execution - Windows Server 2008 SP2 - KB2971850 [1,8.1]
    MS09-060: Vulnerabilities in Microsoft Active Template Library (ATL) ActiveX Controls for Microsoft Office Could Allow Remote Code Execution - Visio Viewer 2007 SP1/SP2 [1,8.1]
    MS12-001: Vulnerability in Windows Kernel Could Allow Security Feature Bypass - Windows Server 2008 R2 Gold (x64) [1,8.1]
    MS14-033: Vulnerability in Microsoft XML Core Services Could Allow Information Disclosure - Windows Server 2008 SP2 - KB2939576 [1,8.1]
    MS14-025: Vulnerability in Group Policy Preferences Could Allow Elevation of Privilege - Windows Server 2008 SP2 - KB2928120 (x64) [1,7.8]
    MS13-014: Vulnerability in NFS Server Could Allow Denial of Service - Windows Server 2008 R2 Gold/SP1 (x64) [1,7.7]
    I have approved the above patches in WSUS and ran syncronization. The log wsyncmgr.log show that synchronization is done and even all child sites are syncronized. But I am unable to find the above even in the parent site. Checked all the SUP settings and
    all the 2008 server updates are set and marked to download.
    Please help me out on fixing this.

    So you should NEVER approve anything in WSUS. This will cause problems with your clients. Honestly since you approved things in WSUS, I would uninstall WSUS and reinstall it, reinstall the SUP, this will clear up any issues that now exist.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • SCCM 2007 Secondary to SCCM 2012 Secondary Site

    we are planning to upgrade SCCM 2007 secondary to SCCM 2012 Secondary Site, As per the TechNet document that I understand i can't do in place upgrade of Secondary site. I can do only upgrade
    of 2007 DP to 2012 DP,
    This is what I plan,
    1. Install a SCCM 2012 Secondary site
    2. Enable DP sharing in 2012 and share the DP of 2007
    3. Upgrade the 2007 DP into 2012 DP on 2012 Secondary Site.
    My question is,
    1. How to copy the DP package to 2012 Secondary Server DP, it will happen during the upgrade or we need to use Export/extract Content feature in SCCM 2012
    2. How the client migration will happen? Do we need to distribute the 2012 client prior to DP update or we can use client push to upgrade old client.
    3. before share the DP, do i have to remove the MP, PXE role on the 2007 secondary?
    Thanks for your support

    I have already few packages available in that DP that I am going to migrate
    The second shared DP that I want to migrate to 2012, but it is not working.
    Do I need to specify any thing in reassign distribution point wizard, because I only select  the site code where I want to migrate the 2007 DP, and all other option I leave default and client on next.
    This is what I am trying to do.
    I have build a SCCM 2012 Primary and Secondary Server and I am trying to move the DP from exiting SCCM 2007 Secondary Site DP to 2012 Secondary Site.
    I set a source hierarchy for primary server with enable shared DP then I am trying to reassign a DP.

  • My SCCM 2007 Secondary Site Servers have multiple "SMS_SiteSystemToSiteServerConnection_ SiteCode " and "SMS_SiteToSiteConnection_ SiteCode " local groups

    My organization is going through a SCCM 2012 migration and I was asked about our current SCCM 2007 Secondary Sites and when I remoted into my secondary site servers I saw that two of the three servers have multiple "SMS_SiteSystemToSiteServerConnection_<SiteCode>"
    and "SMS_SiteToSiteConnection_<SiteCode>" local groups. 
    This just seemed quite odd and I wanted to know if anyone has dealt with this before.
    Thank you

    Thanks for your reply Eswar.
    One of the SMS_SiteToSiteConnection_<SiteCode>
    groups on two of my Secondary Site servers I believe are configured correctly and they both have my Primary Site Server as a member, but the
    SMS_SiteSystemToSiteServerConnection_<SiteCode> group is empty. Is the
    SMS_SiteSystemToSiteServerConnection_<SiteCode> group supposed to contain my Primary Site server as well? Both the SMS_SiteSystemToSiteServerConnection_<SiteCode>
    and the
    SMS_SiteToSiteConnection_<SiteCode> groups on my Primary Site Server have my Secondary Site Servers as members. 
    Is this correct?
    I'm wondering now if the strange groups with the odd site codes that don't even exist were created when the secondary sites were initially being created a while back. From the documentation, it looks like the former admin initially configured the secondary
    sites using a PowerShell script created by Kaido Jarvemets. According to some of the notes I have read, the admin kept uninstalling and re-installing the sites when they were not showing up in the SCCM 2007 Admin console, but apparently they simply forgot
    to configure a Sender and an Address, if that makes any sense to you.
    So, perhaps these groups ending with an odd Secondary Site code may have been a typo during one of the installation attempts? If this is the case, can these groups be deleted?
    One thing I forgot to mention was that the Secondary Site servers belong to a Global Security AD group and that group is used to add them to both the SMS_SiteSystemToSiteServerConnection_<SiteCode
    and the SMS_SiteToSiteConnection_<SiteCode>
    groups on the Primary Site server.
    Is this allowed?
    Thanks

  • SCCM 2012 secondary server installation failing

    I am trying to install the SCCM 2012 secondary server remotely and when i check the configmgrsetup.log and i see below error. I tried to check the registry at HKLM\software\microsoft\sms and i see a site code as DRW but i had given a site code DFW. 
    I checked the permission on the servers, the OU everything seems to be fine, can someone please suggest:
    INFO: Attempting to load resource DLL... Configuration Manager Setup 8/23/2013 12:51:28 PM 16652 (0x410C)
    ERROR: Connection strings not initialized Configuration Manager Setup 8/23/2013 12:51:28 PM 11464 (0x2CC8)
    CSql Error: Cannot find data for connection type: , cannot get a connection. Configuration Manager Setup 8/23/2013 12:51:28 PM 11464 (0x2CC8)
    ERROR: Failed to connect to SQL Server 'master' db. Configuration Manager Setup 8/23/2013 12:51:28 PM 11464 (0x2CC8)
    INFO: Prerequisite rules for secondary site fresh installation are being run. Configuration Manager Setup 8/23/2013 12:51:28 PM 11464 (0x2CC8)
    INFO: File C:\Windows\smstsvc_test_1.exe does not exist. No zapping needed. Configuration Manager Setup 8/23/2013 12:51:28 PM 11464 (0x2CC8)
    INFO: test loop count:0. Configuration Manager Setup 8/23/2013 12:51:34 PM 11464 (0x2CC8)
    INFO: smstsvc_test_1 Return result <0> Configuration Manager Setup 8/23/2013 12:51:34 PM 11464 (0x2CC8)
    CWmiRegistry::WmiOpen: Failed to read key SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL on FTWEISSCCM12S1.eis.equifax.com Configuration Manager Setup 8/23/2013 12:52:26 PM 11464 (0x2CC8)
    CWmiRegistry::WmiOpen: Failed to read key SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL on FTWEISSCCM12S1.eis.equifax.com Configuration Manager Setup 8/23/2013 12:52:27 PM 11464 (0x2CC8)
    CWmiRegistry::GetValues: Failed to get values from SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL Configuration Manager Setup 8/23/2013 12:52:27 PM 11464 (0x2CC8)
    CWmiRegistry::GetValues: Failed to connect to registry on machine FTWEISSCCM12S1.eis.equifax.com. Error code: 2 Configuration Manager Setup 8/23/2013 12:52:28 PM 11464 (0x2CC8)
    INFO: Checking Installed SMS componants on:FTWEISSCCM12S1.eis.equifax.com. Configuration Manager Setup 8/23/2013 12:52:31 PM 11464 (0x2CC8)
    CWmiRegistry::WmiOpen: Failed to read key SOFTWARE\Microsoft\SMS\Setup on FTWEISSCCM12S1.eis.equifax.com Configuration Manager Setup 8/23/2013 12:52:32 PM 11464 (0x2CC8)
    CWmiRegistry::WmiOpen: Failed to read key SOFTWARE\Microsoft\SMS\Operations Management\SMS Server Role on FTWEISSCCM12S1.eis.equifax.com Configuration Manager Setup 8/23/2013 12:52:32 PM 11464 (0x2CC8)
    CWmiRegistry::WmiOpen: Failed to read key SOFTWARE\Microsoft\SMS\Providers\Sites on FTWEISSCCM12S1.eis.equifax.com Configuration Manager Setup 8/23/2013 12:52:32 PM 11464 (0x2CC8)
    INFO: File
    \\FTWEISSCCM12S1.eis.equifax.com\admin$\smstsvc_test_2.exe does not exist. No zapping needed. Configuration Manager Setup 8/23/2013 12:52:34 PM 11464 (0x2CC8)
    INFO: test loop count:0. Configuration Manager Setup 8/23/2013 12:53:12 PM 11464 (0x2CC8)
    INFO: smstsvc_test_2 Return result <1> Configuration Manager Setup 8/23/2013 12:53:13 PM 11464 (0x2CC8)
    INFO: File C:\Windows\smstsvc_test_3.exe does not exist. No zapping needed. Configuration Manager Setup 8/23/2013 12:53:14 PM 11464 (0x2CC8)
    INFO: test loop count:0. Configuration Manager Setup 8/23/2013 12:53:22 PM 11464 (0x2CC8)
    INFO: smstsvc_test_3 Return result <0> Configuration Manager Setup 8/23/2013 12:53:22 PM 11464 (0x2CC8)
    INFO: This is a local site system. There is no need to check for the Admin$ share. Configuration Manager Setup 8/23/2013 12:53:24 PM 11464 (0x2CC8)
    INFO: Checking Windows Cluster. Configuration Manager Setup 8/23/2013 12:53:27 PM 11464 (0x2CC8)
    CWmi::Connect(): ConnectServer(Namespace) failed. - 0x8004100e Configuration Manager Setup 8/23/2013 12:53:29 PM 11464 (0x2CC8)
    INFO: WMI namespace root\MSCluster not exists on FTWEISSCCM12S1.eis.equifax.com. Configuration Manager Setup 8/23/2013 12:53:29 PM 11464 (0x2CC8)
    INFO: File
    \\FTWEISSCCM12S1.eis.equifax.com\admin$\smstsvc_test_4.exe does not exist. No zapping needed. Configuration Manager Setup 8/23/2013 12:53:30 PM 11464 (0x2CC8)
    INFO: test loop count:0. Configuration Manager Setup 8/23/2013 12:54:08 PM 11464 (0x2CC8)
    INFO: smstsvc_test_4 Return result <7> Configuration Manager Setup 8/23/2013 12:54:08 PM 11464 (0x2CC8)
    INFO: File
    \\FTWEISSCCM12S1.eis.equifax.com\admin$\smstsvc_test_5.exe does not exist. No zapping needed. Configuration Manager Setup 8/23/2013 12:54:10 PM 11464 (0x2CC8)
    INFO: test loop count:0. Configuration Manager Setup 8/23/2013 12:54:48 PM 11464 (0x2CC8)
    INFO: smstsvc_test_5 Return result <7> Configuration Manager Setup 8/23/2013 12:54:48 PM 11464 (0x2CC8)
    INFO: File
    \\FTWEISSCCM12S1.eis.equifax.com\admin$\smstsvc_test_6.exe does not exist. No zapping needed. Configuration Manager Setup 8/23/2013 12:54:52 PM 11464 (0x2CC8)
    INFO: test loop count:0. Configuration Manager Setup 8/23/2013 12:55:30 PM 11464 (0x2CC8)
    INFO: smstsvc_test_6 Return result <0> Configuration Manager Setup 8/23/2013 12:55:30 PM 11464 (0x2CC8)
    INFO: FTWEISSCCM12S1.eis.equifax.com is a 64 bit operating system. Configuration Manager Setup 8/23/2013 12:55:35 PM 11464 (0x2CC8)

    I'm also unable to create Secondary site due above error in configuration setup log.
    INFO: Attempting to load resource DLL...    Configuration Manager Setup    23/Mar/15 3:11:26 PM    5020 (0x139C)
    ERROR: Connection strings not initialized    Configuration Manager Setup    23/Mar/15 3:11:26 PM    8752 (0x2230)
    CSql Error: Cannot find data for connection type: , cannot get a connection.    Configuration Manager Setup    23/Mar/15 3:11:26 PM    8752 (0x2230)
    ERROR: Failed to connect to SQL Server 'master' db.    Configuration Manager Setup    23/Mar/15 3:11:26 PM    8752 (0x2230)
    INFO: Prerequisite rules for secondary site fresh installation are being run.    Configuration Manager Setup    23/Mar/15 3:11:26 PM    8752 (0x2230)
    INFO: File C:\Windows\smstsvc_test_1.exe does not exist. No zapping needed.    Configuration Manager Setup    23/Mar/15 3:11:26 PM    8752 (0x2230)
    INFO: test loop count:0.    Configuration Manager Setup    23/Mar/15 3:11:33 PM    8752 (0x2230)
    INFO: smstsvc_test_1 Return result <0>    Configuration Manager Setup    23/Mar/15 3:11:33 PM    8752 (0x2230)
    CWmiRegistry::WmiOpen: Failed to read key SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL on    Configuration Manager Setup    23/Mar/15 3:11:36 PM    8752 (0x2230)
    CWmiRegistry::WmiOpen: Failed to read key SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL on    Configuration Manager Setup    23/Mar/15 3:11:36 PM    8752 (0x2230)
    CWmiRegistry::GetValues: Failed to get values from SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL    Configuration Manager Setup    23/Mar/15 3:11:36 PM    8752 (0x2230)
    CWmiRegistry::GetValues: Failed to connect to registry on machine  Error code: 2    Configuration Manager Setup    23/Mar/15 3:11:36 PM    8752 (0x2230)

  • Software packages are not distribution to a SCCM 2007 secondary site - not decompressing

    Hello,
    I have a secondary site in my SCCM 2007 which is not de-cpompressing packages.
    the packages are coming down to the 'SMSPKG' folder as .pkg files, but it is not de-compressing into the SMSPKGS$ folder.
    I updates one of the smaller packages to re-push the package down and this is what I have seen in the despool.log on the child site
    STATMSG: ID=4407 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DESPOOLER" SYS=P-DC-PKF-CMDP01 SITE=PKF PID=2304 TID=1260 GMTDATE=Wed Apr 23 13:58:49.908 2014 ISTR0="PR100155" ISTR1="162" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PR100155" SMS_DESPOOLER 23/04/2014 14:58:49 1260 (0x04EC)
    Received package PR100155 version 162 SMS_DESPOOLER 23/04/2014 14:58:49 1260 (0x04EC)
    Drive D is not a fixed drive on \\servername, therefore it cannot be used as the compressed package storage direcotry, use the default directory SMS_DESPOOLER 23/04/2014 14:58:49 1260 (0x04EC)
    Use drive S for storing the compressed package. SMS_DESPOOLER 23/04/2014 14:58:49 1260 (0x04EC)
    Package PR100155 (version 161) exists in the distribution source, save the newer version (version 162). SMS_DESPOOLER 23/04/2014 14:58:50 1260 (0x04EC)
    Waiting for ready instruction file.... SMS_DESPOOLER 23/04/2014 14:58:54 2952 (0x0B88)
    Stored Package PR100155. Stored Package Version = 162 SMS_DESPOOLER 23/04/2014 14:58:54 1260 (0x04EC)
    Forward package status for pkg PR100155 to site PR1 SMS_DESPOOLER 23/04/2014 14:58:54 1260 (0x04EC)
    STATMSG: ID=4400 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DESPOOLER" SYS=P-DC-PKF-CMDP01 SITE=PKF PID=2304 TID=1260 GMTDATE=Wed Apr 23 13:58:54.978 2014 ISTR0="PR100155" ISTR1="\\servername\S$\SMSPKG\PR100155.PCK"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PR100155" SMS_DESPOOLER 23/04/2014 14:58:54 1260 (0x04EC)
    This is happening for all packages on this child site so its not really package related, please could someone provide some insight to what I can do to fix this.
    thanks
    Nazir

    There should be  some more entries in the log file between use Drive and forward package status.
    did you check the status of the package from system status--SM_distribution manager ? any clue 
    can you try preloading one package and see what does it say ? instructions here
    http://blogs.technet.com/b/configurationmgr/archive/2009/05/07/configmgr-2007-the-preload-package-tool-preloadpkgonsite-exe-explained.aspx
    Eswar Koneti | Configmgr blog:
    www.eskonr.com | Linkedin: Eswar Koneti
    | Twitter: Eskonr

  • SCCM 2012 secondary server

    Hi All,
    I am trying to install secondary site server from primary site server. All the prerequisites like .NET 3.5, 4, RDC, BITS are installed. Primary site server name is added In the local admin on the server. But still the installation is getting failed.
    I got mcafee enabled on the machine. Is it blocking bootstrap file
    Log:
    ********************************************************************************  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.412+0><thread=1F2C>
    Starting SMS_BOOTSTRAP.  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.412+0><thread=1F2C>
    Microsoft System Center 2012 Configuration Manager v5.00 (Build 7804)  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.412+0><thread=1F2C>
    Copyright (C) 2011 Microsoft Corp.  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.412+0><thread=1F2C>
    Set current directory to E:\.  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.412+0><thread=1F2C>
    INFO:Action:<Install>.  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.412+0><thread=1F2C>
    Successfully read E:\SMS_BOOTSTRAP.ini.  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.427+0><thread=1F2C>
    Started for the first time.  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.427+0><thread=1F2C>
    Current time: Tue Mar 11 16:56:49 2014  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.427+0><thread=1F2C>
    Looking for the .PKG file...  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.427+0><thread=1F2C>
    Found E:\SMS_BOOTSTRAP.pkg.  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.427+0><thread=1F2C>
    Elapsed time since startup: 0 days, 00 hours, 00 minutes, 00 seconds.  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.427+0><thread=1F2C>
    Processing the .PKG file...  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.427+0><thread=1F2C>
    Validating E:\SMS_BOOTSTRAP.pkg...  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.427+0><thread=1F2C>
    E:\SMS_BOOTSTRAP.pkg passed validation check.  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.427+0><thread=1F2C>
    There is enough disk space: 1574MB required, 952704MB available.  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.427+0><thread=1F2C>
    Temp directory is E:\4n9i849i.TMP.  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.443+0><thread=1F2C>
    Decompressing E:\SMS_BOOTSTRAP.pkg...  $$<SMS_BOOTSTRAP><03-11-2014 16:56:49.443+0><thread=1F2C>
    Decompression successful.  $$<SMS_BOOTSTRAP><03-11-2014 16:57:05.669+0><thread=1F2C>
    Elapsed time since startup: 0 days, 00 hours, 00 minutes, 16 seconds.  $$<SMS_BOOTSTRAP><03-11-2014 16:57:05.669+0><thread=1F2C>
    Running SMS Setup...  $$<SMS_BOOTSTRAP><03-11-2014 16:57:05.669+0><thread=1F2C>
    Successfully parsed E:\4n9i849i.TMP\\SMSSETUP\install.map.  $$<SMS_BOOTSTRAP><03-11-2014 16:57:05.934+0><thread=1F2C>
    E:\4n9i849i.TMP\\SMSSETUP\install.map build number "7804" is correct.  $$<SMS_BOOTSTRAP><03-11-2014 16:57:05.934+0><thread=1F2C>
    Started "E:\4n9i849i.TMP\\SMSSETUP\bin\x64\SetupWPF.exe /script E:\SMS_BOOTSTRAP.ini /nouserinput" as PID 8016.  $$<SMS_BOOTSTRAP><03-11-2014 16:57:05.934+0><thread=1F2C>
    Waiting for PID 8016 to terminate...  $$<SMS_BOOTSTRAP><03-11-2014 16:57:05.934+0><thread=1F2C>
    PID 8016 exited with code 0.  $$<SMS_BOOTSTRAP><03-11-2014 17:19:43.016+0><thread=1F2C>
    FATAL ERROR: SMS_SITE_COMPONENT_MANAGER is not running, setup must have failed, bootstrap procedure aborted! 
    $$<SMS_BOOTSTRAP><03-11-2014 17:19:43.016+0><thread=1F2C>
    Deinstalling myself...  $$<SMS_BOOTSTRAP><03-11-2014 17:19:43.016+0><thread=1F2C>
    Deleted E:\SMS_BOOTSTRAP.pkg.  $$<SMS_BOOTSTRAP><03-11-2014 17:19:43.078+0><thread=1F2C>
    Deleted E:\SMS_BOOTSTRAP.ini.  $$<SMS_BOOTSTRAP><03-11-2014 17:19:43.078+0><thread=1F2C>
    Deleted E:\SMS_BOOTSTRAP.EXE.  $$<SMS_BOOTSTRAP><03-11-2014 17:19:43.078+0><thread=1F2C>
    Deleted temp directory <E:\4n9i849i.TMP>.  $$<SMS_BOOTSTRAP><03-11-2014 17:19:43.359+0><thread=1F2C>
    Deinstalled the SMS_BOOTSTRAP service.  $$<SMS_BOOTSTRAP><03-11-2014 17:19:43.359+0><thread=1F2C>
    Deinstallation complete.  $$<SMS_BOOTSTRAP><03-11-2014 17:19:43.359+0><thread=1F2C>
    Bootstrap procedure unsuccessful.  $$<SMS_BOOTSTRAP><03-11-2014 17:19:43.359+0><thread=1F2C>
    Stopping SMS_BOOTSTRAP...  $$<SMS_BOOTSTRAP><03-11-2014 17:19:43.359+0><thread=1F2C>
    SMS_BOOTSTRAP stopped.  $$<SMS_BOOTSTRAP><03-11-2014 17:19:43.359+0><thread=1F2C>
    ********************************************************************************  $$<SMS_BOOTSTRAP><03-11-2014 17:19:43.359+0><thread=1F2C>
    ********************************************************************************  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.078+0><thread=DD8>
    Starting SMS_BOOTSTRAP.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.093+0><thread=DD8>
    Microsoft System Center 2012 Configuration Manager v5.00 (Build 7804)  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.093+0><thread=DD8>
    Copyright (C) 2011 Microsoft Corp.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.093+0><thread=DD8>
    Set current directory to E:\.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.093+0><thread=DD8>
    INFO:Action:<Install>.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.109+0><thread=DD8>
    Successfully read E:\SMS_BOOTSTRAP.ini.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.109+0><thread=DD8>
    Started for the first time.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.109+0><thread=DD8>
    Current time: Fri Mar 14 15:53:13 2014  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.109+0><thread=DD8>
    Looking for the .PKG file...  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.109+0><thread=DD8>
    Found E:\SMS_BOOTSTRAP.pkg.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.109+0><thread=DD8>
    Elapsed time since startup: 0 days, 00 hours, 00 minutes, 00 seconds.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.109+0><thread=DD8>
    Processing the .PKG file...  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.109+0><thread=DD8>
    Validating E:\SMS_BOOTSTRAP.pkg...  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.109+0><thread=DD8>
    E:\SMS_BOOTSTRAP.pkg passed validation check.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.125+0><thread=DD8>
    There is enough disk space: 1574MB required, 952700MB available.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.125+0><thread=DD8>
    Temp directory is E:\s3jvf81y.TMP.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.125+0><thread=DD8>
    Decompressing E:\SMS_BOOTSTRAP.pkg...  $$<SMS_BOOTSTRAP><03-14-2014 15:53:13.125+0><thread=DD8>
    Decompression successful.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:29.707+0><thread=DD8>
    Elapsed time since startup: 0 days, 00 hours, 00 minutes, 16 seconds.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:29.816+0><thread=DD8>
    Running SMS Setup...  $$<SMS_BOOTSTRAP><03-14-2014 15:53:29.816+0><thread=DD8>
    Successfully parsed E:\s3jvf81y.TMP\\SMSSETUP\install.map.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:30.066+0><thread=DD8>
    E:\s3jvf81y.TMP\\SMSSETUP\install.map build number "7804" is correct.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:30.097+0><thread=DD8>
    Started "E:\s3jvf81y.TMP\\SMSSETUP\bin\x64\SetupWPF.exe /script E:\SMS_BOOTSTRAP.ini /nouserinput" as PID 5480.  $$<SMS_BOOTSTRAP><03-14-2014 15:53:30.113+0><thread=DD8>
    Waiting for PID 5480 to terminate...  $$<SMS_BOOTSTRAP><03-14-2014 15:53:30.113+0><thread=DD8>
    PID 5480 exited with code 0.  $$<SMS_BOOTSTRAP><03-14-2014 16:14:06.991+0><thread=DD8>
    FATAL ERROR: SMS_SITE_COMPONENT_MANAGER is not running, setup must have failed, bootstrap procedure aborted!  $$<SMS_BOOTSTRAP><03-14-2014 16:14:07.022+0><thread=DD8>
    Deinstalling myself...  $$<SMS_BOOTSTRAP><03-14-2014 16:14:07.022+0><thread=DD8>
    Deleted E:\SMS_BOOTSTRAP.pkg.  $$<SMS_BOOTSTRAP><03-14-2014 16:14:07.084+0><thread=DD8>
    Deleted E:\SMS_BOOTSTRAP.ini.  $$<SMS_BOOTSTRAP><03-14-2014 16:14:07.084+0><thread=DD8>
    Deleted E:\SMS_BOOTSTRAP.EXE.  $$<SMS_BOOTSTRAP><03-14-2014 16:14:07.084+0><thread=DD8>
    Deleted temp directory <E:\s3jvf81y.TMP>.  $$<SMS_BOOTSTRAP><03-14-2014 16:14:07.365+0><thread=DD8>
    Deinstalled the SMS_BOOTSTRAP service.  $$<SMS_BOOTSTRAP><03-14-2014 16:14:07.365+0><thread=DD8>
    Deinstallation complete.  $$<SMS_BOOTSTRAP><03-14-2014 16:14:07.365+0><thread=DD8>
    Bootstrap procedure unsuccessful.  $$<SMS_BOOTSTRAP><03-14-2014 16:14:07.365+0><thread=DD8>
    Stopping SMS_BOOTSTRAP...  $$<SMS_BOOTSTRAP><03-14-2014 16:14:07.365+0><thread=DD8>
    SMS_BOOTSTRAP stopped.  $$<SMS_BOOTSTRAP><03-14-2014 16:14:07.365+0><thread=DD8>
    ********************************************************************************  $$<SMS_BOOTSTRAP><03-14-2014 16:14:07.365+0><thread=DD8>
    Regards, Pratap

    Hi,
    What's the version of your SCCM 2012?
    If it is SCCM 2012 sp1 CU2, please have a look on the following KB.
    http://blogs.technet.com/b/configmgrteam/archive/2013/07/02/known-issue-secondary-site-installation-failure-with-cumulative-update-2.aspx
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SCCM 2007 Site Server Signing Certificate - Any Way to Extend Life of Template

    Good morning,
    It looks like my Site Server Signing certificate can't be renewed past the five year validity that the template was given.  So, come Feb. 14th, I can't renew my existing Site Server Signing certificate.  Is there any way to extend the life of the
    certificate template so I can just "renew" the existing certificate on my server as opposed to creating and distributing a new one?  Thanks for any help anyone can provide.

    Good morning,
    It looks like my Site Server Signing certificate can't be renewed past the five year validity that the template was given.  So, come Feb. 14th, I can't renew my existing Site Server Signing certificate.  Is there any way to extend the life of the
    certificate template so I can just "renew" the existing certificate on my server as opposed to creating and distributing a new one?  Thanks for any help anyone can provide.

  • FEP Exemptions for SCCM 2007 Server

    I configured a policy for my SCCM 2007 site server and used the SCCM Server Template. It came populated with the %programfiles%\Microsoft Configuration Manager\Inboxes\*.box. I found today that my SCCM server was backing up processing hardware inventory
    and I looked at the %programfiles%\Microsoft Configuration Manager\Inboxes\Auth\dataldr.box and found over 6000 there. I added that path to my exclusions in the policy but it did not speed up .mif processing. Only when I turned of real time protection did
    the backlog clear up. Is there a process that I might exclude that might be getting blocked? Should I post this in the SCCM forum?Orange County District Attorney

    This is old post and there have been several changes in SCCM, and Forefront, specially successor for Forefront is System Center Endpoint Protection which integrated into SCCM. You could define filtering for both process and files and it should work, but
    you might wait or enforce policy update on clients.
    If possible try reproduce the problem in SCEP and check if it reproduce or not?

  • Distribution-Point sharing (SCCM 2007 - SCCM 2012)

    I've some problems by gathering data from a SCCM 2007 Hierarchy, into the SCCM 2012 environment.
    Gathering Data without enable Distribution Point sharing is successful, enabling Distribution Point Sharing the Process always fail.
    In migmctrl.log i recogniced that the process alway stucks on the following Row for about one hour:
     [Worker]:                                 Query against Legacy Site , @SourceSiteCode=KR1,
    @LastID=KR10001B:                       WITH Block AS                     
    (                          SELECT TOP 2500 ID FROM PkgStatus WHERE ID > @LastID ORDER BY ID                     
    )                      SELECT                         
    ps.ID COLLATE SQL_Latin1_General_CP1_CI_AS AS ID,                          ps.Type AS Type,                         
    ps.SiteCode COLLATE SQL_Latin1_General_CP1_CI_AS AS SiteCode,                          ps.PkgServer COLLATE SQL_Latin1_General_CP1_CI_AS
    AS PkgServer,                          ps.Personality AS Personality,                         
    ps.Status AS Status,                          ps.SourceVersion AS SourceVersion,                         
    ps.UpdateTime AS UpdateTime,                          ps.Location COLLATE SQL_Latin1_General_CP1_CI_AS AS Location,                         
    ps.SigLocation COLLATE SQL_Latin1_General_CP1_CI_AS AS SigLocation,                          ps.ShareName COLLATE SQL_Latin1_General_CP1_CI_AS
    AS ShareName,                          ps.HTTPUrl COLLATE SQL_Latin1_General_CP1_CI_AS AS HTTPUrl,                         
    ps.State AS State,                          ps.SigURL COLLATE SQL_Latin1_General_CP1_CI_AS AS SigURL                      
    FROM dbo.PkgStatus ps                      JOIN (                         
    SELECT d.ThisSiteCode COLLATE SQL_Latin1_General_CP1_CI_AS AS SiteCode FROM SMSData d                           UNION ALL                         
    SELECT s.SiteCode FROM Sites s JOIN SMSData d ON s.ReportToSite = d.ThisSiteCode AND s.SiteType = 1) s2                      ON s2.SiteCode = ps.SiteCode                     
    JOIN DistributionPoints dp ON ps.SiteCode = dp.SMSSiteCode                          AND ps.PkgServer = dp.NALPath collate SQL_Latin1_General_CP1_CI_AS                     
    WHERE ps.Type != 1 AND dp.Action != 3                          AND ps.ID > @LastID                         
    AND ps.ID <= (SELECT MAX(ID) FROM Block)
    And after that this Errormessage appear:
    ERROR: [Worker]:                                 Failed to execute:                      
    WHILE (1 = 1)                      BEGIN                         
    MERGE TOP (1000) PkgStatus AS target                          USING   (                             
    SELECT                                ps.ID, ps.Type, SiteCode = @CurrentSiteCode, PkgServer = dps.PkgServerFQDN,
    ps.Personality, ps.Status, ps.SourceVersion, ps.UpdateTime,                                ps.Location,
    ps.SigLocation, ps.ShareName, ps.HTTPUrl, ps.State, ps.SigURL, SiteCode as SourceSiteCode                             
    FROM #MIG_PkgStatus ps                              JOIN #MIG_DistributionPointSource dps ON ps.PkgServer = dps.PkgServer                             
    WHERE ID in (SELECT PkgID collate SQL_Latin1_General_CP1_CI_AS from dbo.SMSPackages_L)                             )
    AS src                          ON                           
    (target.ID = src.ID AND target.Type = src.Type AND target.SiteCode = src.SiteCode AND target.PkgServer = src.PkgServer AND target.Personality = src.Personality) -- TODO: Ensure we match an index                         
    WHEN NOT MATCHED THEN                              INSERT  (ID, Type, SiteCode, PkgServer, Personality, Status,
    SourceVersion, UpdateTime,                                      Location,
    SigLocation, ShareName, HTTPUrl, State, SigURL)                              VALUES (src.ID, src.Type, src.SiteCode,
    src.PkgServer, src.Personality, src.Status, src.SourceVersion, src.UpdateTime,                                     
    src.Location, src.SigLocation, src.ShareName, src.HTTPUrl, src.State, src.SigURL)                          WHEN MATCHED AND (                             
    target.Status != src.Status                              OR target.SourceVersion != src.SourceVersion                             
    OR target.UpdateTime != src.UpdateTime                              OR target.Location != src.Location                             
    OR target.SigLocation != src.SigLocation                              OR target.ShareName != src.ShareName                             
    OR target.HTTPUrl != src.HTTPUrl                              OR target.State != src.State                             
    OR target.SigURL != src.SigURL                              ) THEN                             
    UPDATE SET                                  target.Status = src.Status,                                 
    target.SourceVersion = src.SourceVersion,                                  target.UpdateTime
    = src.UpdateTime,                                  target.Location = src.Location,                                 
    target.SigLocation = src.SigLocation,                                  target.ShareName = src.ShareName,                                 
    target.HTTPUrl = src.HTTPUrl,                                  target.State = src.State,                                 
    target.SigURL = src.SigURL                          WHEN NOT MATCHED BY SOURCE AND EXISTS(                                 
    SELECT * FROM MIG_Entity me WHERE me.Type = 2 AND me.ObjectKey = target.ID)                              AND EXISTS
    (                                  SELECT * FROM MIG_DistributionPointSource dpsrc                                 
    WHERE dpsrc.PkgServerFQDN = target.PkgServer AND dpsrc.SourceSiteCode = @SourceSiteCode                             
    )                              AND NOT EXISTS (                                 
    SELECT * FROM MIG_Job job                                  WHERE Type = 3 AND dbo.fn_GetNALPathFromMIGJobConfiguration(job.AdditionalConfiguration)
    = target.PkgServer                              )                             
    THEN DELETE ;                            IF @@ROWCOUNT = 0 BREAK                     
    END SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]:                 End syncing Distribution Points related tables. SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]:         ========== End syncing distribution points ========== SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    ERROR: [Worker]:         System.Data.SqlClient.SqlException: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.     at System.Data.SqlClient.SqlConnection.OnError(SqlException
    exception, Boolean breakConnection)     at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler,
    SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)    
    at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior
    runBehavior, Boolean returnStream, String method, DbAsyncResult result)     at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)     at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()    
    at Microsoft.ConfigurationManagement.MigrationManager.MigrationRepository.BulkCopyData[T](Snapshot snapshot, LegacyRepository legacyRepository, IntlSqlFormatter formatter, Func`2 watermarkFunc, T lastMaxId, Boolean doNotDrop)     at Microsoft.ConfigurationManagement.MigrationManager.MigrationRepository.BulkCopyData[T](Snapshot
    snapshot, LegacyRepository legacyRepository, IntlSqlFormatter formatter, Func`2 watermarkFunc, T lastMaxId)     at Microsoft.ConfigurationManagement.MigrationManager.SyncAgentJob.<SyncDPSettings>d__5f.MoveNext()    
    at Microsoft.ConfigurationManagement.MigrationManager.ExtensionMethods.<AttachErrorHandler>d__6`1.MoveNext() SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    STATMSG: ID=8610 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_MIGRATION_MANAGER" SYS="<SourceSITESERVER>" SITE=CA1 PID=2348 TID=4516 GMTDATE=Do Nov 07 11:28:33.390 2013 ISTR0=""<SourceSITESERVER>" (CA1)"
    ISTR1="<DestinationSITESERVER>" ISTR2="-2146232060" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33
    4516 (0x11A4)
    STATMSG: ID=8605 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_MIGRATION_MANAGER" SYS="<SourceSITESERVER>" SITE=CA1 PID=2348 TID=4516 GMTDATE=Do Nov 07 11:28:33.416 2013 ISTR0=""<SourceSITESERVER>" (CA1)"
    ISTR1="<DestinationSITESERVER>" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516
    (0x11A4)
    [Worker]: ==================== Sync Agent Job 16 Ended ==================== SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    ERROR: [Worker]: Microsoft.ConfigurationManagement.Migration.MigrationException: 1 exceptions occurred during syncing.     at Microsoft.ConfigurationManagement.MigrationManager.SyncAgentJob.<get_ExecutionPlan>d__7.MoveNext()    
    at Microsoft.ConfigurationManagement.MigrationManager.Job`1.ExecuteNext() SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]: Start processing status changed event for MIG_SiteMapping.ID=16 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]:         Set the schedule item 16 end time SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]:         Set the schedule item 16 status to Failed SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]: End processing status changed event for MIG_SiteMapping.ID=16 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]: Disposing Job 16 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]: Removing Job 16 from job manager. SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]: Removing the Job with Id 16. SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]: Disposing worker SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    [Worker]: Disposing current site connection SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = Unknown error 0x80131500, 80131500 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = Unknown error 0x80131500, 80131500 SMS_MIGRATION_MANAGER 07.11.2013 12:28:33 4516 (0x11A4)
    In the StatusMessages of Migration_Manager there are the following Errormessage:
    The Migration Manager on Configuration Manager site server "<SourceSITESERVER>" was unable to complete the SQL operation on the SQL Server "<DestinationSITESERVER>" of Configuration Manager 2007 due to error "-2146232060".
    Thanks in advance

    Hi,
    1.Please examine reports “All active package distributions” on SCCM 2007 to check whether have package is currently being installed or removed. Then refresh all DPs on SCCM 2007.
    After completing these actions above, try to re-gather data.
    2.If fail, please check the transaction log both on SCCM 2012 and SCCM 2007 SQL Server. Then, a SQL engineer should be involved in this case.(This forum do not support database issue)
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How manually remove a DP in SCCM 2007 ?

    Hello,
    we had a disaster and our old SCCM 2007 site server is dead.
    We already have a SCCM 2012 site server up and running and a old SCCM 2007 distribution point still up.
    we need to convert the old DP to a 2012 DP.
    How can i manually remove the DP from SCCM 2007 without an access to the console, site server, bd, etc...?
    On the DP, Can I just remove all the share and permission?
    thanks

    If you don't use the 2007 environment any more you can delete the old shares and folders.

  • SCCM 2012 Secondary Site Migration

    we have to migrate more then 50 Secondary Site to SCCM 2012 Secondary Site. Since we have to low-bandwidth connection for the remote site we prefer to go with SCCM 2012 Secondary site inside of DP.
    I know we can migrate SCCM 2007 Secondary to SCCM 2012 DP and SCCM 2007 DP to SCCM 2012 DP.
    But is there a way i can move the distribution point package from SCCM 2007 Secondary to SCCM 2012 Secondary Site?
    when i try to migrate migrate SCCM 2007 Secondary Site DP to SCCM Secondary Site 2012, it uninstall the 2007 Secondary site and upgrade the DP to SCCM 2012 under the 2012 Secondary site.
    But my requirement is to move the old SCCM 2007 secondary site package to SCCM 2012 Secondary site DP, is there any tool to manage this activity?
    or what is the best practice to do this migration. 

    Hi,
    You could use prestage content in SCCM 2012 to send packages to remote DP.
    Configuration Manager 2012: Content Prestaging and Remote Content Distribution
    http://blogs.technet.com/b/inside_osd/archive/2011/04/11/configuration-manger-2012-content-prestaging.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SCCM 2007 R3 Software Updates Sync : 6703 WSUS server not configured

    Hi,
    We run SCCM 2007 R3 in native mode (Software Update Point and WSUS both reside on SCCM site server). We're having issues running Software Updates Synchronization which have previously worked fine. In SMS_WSUS_Control_Manager the errors appear as follows
    MessageID:6703
    SMS WSUS Synchronization failed.
    Message: WSUS server not configured.
    Source: CWSyncMgr::DoSync.
    The operating system reported error 2147500037: Unspecified error
    I've followed the suggested fixes in
    http://technet.micro...y/bb735874.aspx but still we have an issue.
    If I open the WSUS console directly and run a manual synchronization from Microsoft this completes successfully. However, I presume this will not be using SSL which is what SCCM will want to use in native mode. I've checked the bindings in IIS on WSUS Administration
    site to confirm that the certificate hasn't expired.
    Any ideas what else I can try?
    Cheers,
    Paul

    wsyncmgr.log repeatedly contains the following
    Performing sync on retry schedule SMS_WSUS_SYNC_MANAGER 13/10/2013 14:02:11 612 (0x0264)
    STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=CCPSCCM02 SITE=WES PID=8084 TID=612 GMTDATE=Sun Oct 13 13:02:11.288 2013 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 13/10/2013
    14:02:11 612 (0x0264)
    Sync failed: WSUS server not configured. Source: CWSyncMgr::DoSync SMS_WSUS_SYNC_MANAGER 13/10/2013 14:07:11 612 (0x0264)
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=CCPSCCM02 SITE=WES PID=8084 TID=612 GMTDATE=Sun Oct 13 13:07:11.284 2013 ISTR0="CWSyncMgr::DoSync" ISTR1="WSUS server not configured" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6=""
    ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 13/10/2013 14:07:11 612 (0x0264)
    Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER 13/10/2013 14:07:11 612 (0x0264)
    Sync time: 0d00h05m00s SMS_WSUS_SYNC_MANAGER 13/10/2013 14:07:11 612 (0x0264)

  • WSUS Server settings and Migrating SCCM 2007 Clients to SCCM 2012 R2

    I am in the process of migrating a site from SCCM 2007 to SCCM 2012 R2.
    Whilst doing this I came across the following issue:
    The first issue is the workstations are woefully out of date, patch and update-wise, some have never had a patch applied as the branch IT staff are building them from the original disk. The policy is set in the SCCM 2007 client to point the machines at
    the 2007 WSUS server, which is not set to deliver any updates to 2007 clients and hasn't been for a while. So as soon as the client is installed they lose the ability to get updates from Microsoft and don't get them from the 2007 WSUS server either.
    Issue number 2 is the machines are a mixture of hand-built machines to SCCM 2007 delivered images, the SCCM image is patch using offline patching so they are somewhat up-to-date, but the hand-built machines are not and as there is no standardization on
    the Microsoft Update client settings, the IT person on-site sets it to whatever he/she feels like, as it makes no difference once the client is installed and the policy applied.
    So, when I come to update the client from 2007 to 2012, the following occurs
    The Client uninstalls, and the GPO policy settings for Windows Update are removed.
    Depending on the setup of the client initially, some machines are then going to Microsoft for their updates (literally 100s) and although the new client is installed the policy update does not fire to update the Windows Update Policy settings, sometimes
    for hours after the install finishes. My thoughts are that it just can't run the policy as it is bogged down by patches updating and, in some cases, rebooting and then updating some more.
    As a workaround I have had to go in an physically disable Microsoft Update on these machines, which stops the downloading and eventually allows the policy to apply, after which the machine then begins to receive patches from WSUS in a controlled method during
    maintenance windows.
    I have tried a number of approaches, even setting the Global Group Policy for Windows Update, but the install still removes the keys and basically sets Windows updates back to whatever it was set before the policy was applied and stays that way until the
    new client is installed and the Machine policy reapplied. This can be speeded up by initiating it on the client obviously, but that would mean going to each client or using right-click tools on each machine, which is not an option.
    What I would like to know is if there is something I am missing from my methods or is it just that I have never been on a site with such out of date workstations built in such different ways.
    Any help would be appreciated.

    First note that clients do *not* get updates from WSUS in ConfigMgr. The Windows Update Agent (WUA) must point to the WSUS integrated into ConfigMgr (by virtue of having the SUP installed on it) but this is only to make the update catalog/metadata available
    to it. Approving updates in WSUS is unsupported for ConfigMgr.
    What you've described above is all working as designed although these clients are falling into a gap between the 2007 and 2012 configuration and thus they are reaching out to Windows Update during this gap and installing updates. To prevent this, you
    need to disable automatic updates via a domain group policy. This will prevent all automated WUA activity including installing updates from any source automatically. This will not interfere with ConfigMgr Software Updates in any way though.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Migrate Windows XP to Windows 7 in secondary site using sccm 2007

    Hi all,
    I have migrated Windows XP to Windows 7 using SCCM 2007 R3 SP2 in the primary site and a DHCP server is available. Now I need to do the same exercise to an XP machine in a secondary site but there is no DHCP server, all machines are configured with static
    IPs. Do I need to install temporary DHCP server there or I have other options?

    As mentioned, to my knowledge, there's nothing built in to handle this. You can try using the capture tasks as I mentioned but I don't think that they will preserve the IP all the way into the deployed Windows instance. For this, you will have to build
    some type of custom solution.A quick search of the web should turn up results:
    http://www.bing.com/search?q=osd+without+dhcp&src=IE-TopResult&FORM=IETR02&conversationid=
    Jason | http://blog.configmgrftw.com | @jasonsandys

Maybe you are looking for

  • SSO - login/logout toPortal 'under the covers'

    Hi we are developing a website where users can have their own username/password. Once logged in (via a webpage in our application) they should be able to access Portal pages which require a DIFFERENT username/password (the reason for this is that the

  • Afteburner has no audio in video capture?

    I'm not really sure if this is the right section for this topic but i'd just like to know if there's any way to have audio when video capture is used. Thank you.

  • Terrible Customer Service / Inventory Issues

    I visited the Mentor, Ohio store this evening and am completely dissassified with the level of customer service provided by the sales staff and the store manager.  I arrived at the store at 8:30 PM looking to purchase a Nest Protect smoke detector -

  • SORT Varchar numbers

    Post Author: bwilson200093 CA Forum: Crystal Reports How do I sort numbers that are Varchar in the database.  I tried changing the format of the field in my report to Number, but it still sorts: 945 8765443 78 6567889 555 45676788888 etc. thanks BW

  • Ultrasonic fogger humidifind​er vaporizer fogger

    Hi. I want to make an ultrasonic fog generator.I have an special ultrasonic piezzo(whitch give out 1,6-2.4 mhz), so I have to make an cirtuit which give ultrasonic signal. I sure know it is 1.6 mhz or 2,4 Mhz its need for the ultra sound crsh water a