SCCM 2007 SP2 R3 client on App V Server with Terminal Server

Hii,
We have the following servers in our environment.
Termincal Services with Server 2008 and App v on same machine
SCCM 2007 SP2 R3. When I installed SCCM client on APP V server yesterday, terminal and App V servers / services stopped working and users were unable to use these services. After uninstalling of SCCM client, its working. What is the recommendation for this
situation? Is it recommended to do not install SCCM client on APP V servers? And if we install SCCM client then APP V services stop working?
Please suggest.
Regards, Syed Fahad Ali

issue has been resolved via below link.
http://support.microsoft.com/kb/2694295/en-us
the client advertise setting was set to Allow virtual application package advertisement. For the
time being we uninstall the SCCM client from all APP V servers. Soon we will test with the mentioned setting in above link.
Thanks for your response.
Regards, Syed Fahad Ali

Similar Messages

Adobe Reader 11.0.04 SCUP update causing SCCM 2007 SP2 R3 client to crash

When we started deploying the 11.0.0.4 update for Adobe Reader provided for System Center Updates Publisher (SCUP), we started having failures with our Operating System Deployments. When the 11.0.0.4 update installs during the Install Software Updates (via WSUS) step, it stops the SCCM client, causing the SCCM client to crash and uninstall. When the SCCM client uninstalls, it breaks the OSD process and the image process fails. Our current .wim file has Adobe Reader 11.x patched to the 11.0.0.3 level. We are using SCUP 2011. Everything was working ok until this update came out. We even tried creating an SCCM software distribution package to deploy the update and it still crashes the SCCM client when installed that way. Has anyone seen similar issues in their SCCM environments? Does Adobe have a support number available to get help with these types of issues? Thanks.

Try using the Adobe doc: 1 Introduction — Enterprise Administration Guide
Also, you'll find installing and updating via bootstrapper is easier than AIP over the long haul.
hth,
Ben

Windows 7 deployment using SCCM 2007 SP2

Hi,
We planning to do Windows 7 deployment using SCCM 2007 SP2 so we have some queries regarding same.
Is it possible to take entire HDD backup & restore using SCCM 2007 SP2? Also is it recommended to do so?
What will be the effective method to deploy OS at remote branches?
If we want to save the network bandwidth then what will way to send image to distribution point and client as well.
Is it mandatory to have PXE boot enable in bios & set as first boot preference on each client machine for PXE initiated windows 7 deployment? If so then is there any option to enable PXE boot & set as first preference on client machine
remotely?
Is it possible to deploy OS in other than C drive i.e D or E to have dual boot option?
Which we will be best method to have zero touch deployment without any end user intervention and why?
Please help to clarify.

As Jason said, these are the configurations that requires some high level skills to configure it, the answers are the same as said by Arnav... below links would give you a good heads up for the OSD in SCCM if you still want to try it on your own...
http://download.microsoft.com/download/7/C/9/7C9A54AC-9661-48CA-9A7C-E3D2B5B23CF2/SystemCenterConfigurationManager2007OperatingSystemDeploymentGuide.pdf
http://blogs.technet.com/b/configurationmgr/archive/2009/07/27/a-step-by-step-for-using-osd-through-system-center-configuration-manager-2007.aspx
https://blogs.technet.com/b/birojitn/archive/2010/01/20/windows-7-deployment-using-sccm-2007-sp2.aspx
bluerail

Windows 8.1 Pro OS Deployment Using SCCM 2007 SP2 R3 - Possible? Supported?

I have been able to successfully capture and deploy a Windows 8.1 Pro image to a desktop, however the Apply Device Drivers action consistently fails with the following error in the smsts.log:
Driver-signing policy cannot be configured on this operating system
After that point no suitable drivers are able to be found and the task sequence is unable to proceed due to the lack of drivers. I'm using the same task sequence I used for Windows 8 OS deployment within SCCM 2007 SP2 R3. I'm just looking for confirmation
on whether or not driver deployment is now broken in Windows 8.1.

The toolset has been updated significantly to support Win 8.1. Exact technical details of the changes aren't published anywhere beyond the fact that it simply isn't supported. It's insufficient simply because it is known not to work -- beyond that,
does it really matter?
Note that even Win8 deployment within ConfigMgr is unsupported so basically you're off into uncharted territory and assuming a lot of risk in doing so.
Jason | http://blog.configmgrftw.com

SCCm 2007 sp2

I'm having a problem when installing sccm 2007 sp2 when I try to download updates in order to slow the Internet that you. please show me the file contains all the ingredients needed in step 89 updated prerequisite component path so that I could install
the file below to use the Internet

Hi,
You can download the pre-reqs from another computer, this post describes how it is done:
http://www.adrianstoian.com/?p=48
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

3party calendar apps and invitations with iCal Server - Mac/PC enviro

We are a mixed OS company with macs and PCs. The macs are currently using iCal client software which is working great. However, our PC users are using Thunderbird-Lightning extension. In iCal or the web GUI, users get an invitation notification to accept or deny. Currently, with our thunderbird-lightning clients when they receive the meetings, it is automatically populated in their calendars without the option to accept or deny. Is there a way to fix this? Also when thunderbird-lightning clients try to email members to a meeting it will try to send to the UID and not the users email address, even it is defined in osx workgroup mng. Lastly we would like to add email notifications for all meetings, if possible.
What other windows calendar clients seem to work best with iCal Server? Any help is greatly appreciated. Thank you!
10.6.1 SL server, ical server.
10.5 and 10.6 mac users
Win XP with Thunderbird 2.0.0.23 + Lightning 0.9 users

Hi!
Have you had a look at eMClient? works with IMAP and CalDAV on Widows, even Windows 7, and is free.
/Hasse

SCCM 2007: update fails, client cannot download

Hi,
I have a specific update on SCCM 2007 for Windows 7 clients which clients don't seem to be able to download. It starts the install but fails directly (cannot download).Should I remove this update and redownload? Just right click and "download software
update" or really delete it? If deletion is necessary, how can I retrieve this upate then?
How then?
J.
Jan Hoedt

1 patch took to long to install and that made installation think it failed. It was a non critical patch that solved the issue (we don't install non-critical patches normally that's why we did not notice)
Jan Hoedt

Replacing Exchange 2007 with another server with new server name

I am working with a client to move Exchange from the server it is on now to another server. This will be new hardware and new name. The current server Exchange is on will still exist by I want to move Exchange completely off of that server.
Current Network Setup:
Server 1: 1 SBS 2003 server is Domain Controller, Runs AD, DNS, DHCP, File Sharing, SharePoint 2003 and Remote Desktop
Server 2: Server 2008 running Exchange 2007, Backup Domain Controller, File Sharing, SharePoint 2007, Terminal Services.
Current Plan:
Introduce Server 3 to run just Exchange 2007. I would like to completely over a short period of time move exchange from Server 2 to Server 3. I have searched over the internet and found several articles but still have a few questions. There are roughly 75
mailboxes with 50 actual users. Some users are using Outlook 2003 that came with the SBS 2003 and others are using Later versions of office. Server 3 will be a Server 2008 R2 system.
1. What is the best method to perform this transfer. I found article TechNet
Article that explains with 2 remote offices how to do this but not sure if the same will apply.
2. Since I am not immediately decommissioning Server 2 how can I safely remove all the roles and add them to Server 3?
3. For the end user impact. Will the change make Outlook automatically pickup the new server name or will each user need to reconfigure their outlook profiles?
4. I will be moving OWA since there are several Remote and Terminal Service users that use OWA for email. I would like to keep the same certificate and domain name setup if possible.

Hi,
According to your description, I recommend you install another exchange 2007 on server 3, the exchange server role as the same as server 2.
And then, transfer all mailboxes and configurations(OWA,DNS..) from server 2 to server 3.
Finally, decommission the server 2 .
Thanks.
Niko Cheng
TechNet Community Support

SAP BI Client tools are not communicating with BO server

Hi Experts,
We've recently installed BI 4.1 . We're having few issues:
1. When client is installed on different machine then it is not communicating with server. We've already tried few things like untick auto assign from Request server and manually assign static port but it didn't work .
2. Our BO Server is running on AWS Cloud.
3. Client is communicating when installed on server machine.
4. Could you please help our how to resolve this error.
5. CMC and BI launch pad are installed on server side as they're web browser tool and we need to install these on client machine as well. Qns is Do we need to install them or provide just URL link? If just URL like where to get these URL links.
6. We can't see SAP Lumira and SAP Dashboard on Service market place to install. Where we can find these software on Service maket place?
7. Could someone please send screenshot to install Dashboard, Lumira, Analysis office and Crystal report enterprise and crystal report 2013.
8. Do we need to install all these on client machine?
9. Could you please give me software list which should be installed on client machine?
10. As i know there is life cycle management tool but it is not even available from server side not even on client side. Could you please recommend how it can be installed??
Thanks in advance.

1. When client is installed on different machine then it is not communicating with server. We've already tried few things like untick auto assign from Request server and manually assign static port but it didn't work .
Could you confirm that you are able to ping the BO server from Client machine. Also use telnet command from commandline of CMD in client machine. It will help to confirm that port communication is successful. Use ipaddress:cmsport for the system while logging into the client software. Update the hosts file entries at client machine with BO server name and ip address. Create an exception for BO installation location at client machine and check the results
2. Our BO Server is running on AWS Cloud.
3. Client is communicating when installed on server machine.
4. Could you please help our how to resolve this error.
5. CMC and BI launch pad are installed on server side as they're web browser tool and we need to install these on client machine as well. Qns is Do we need to install them or provide just URL link? If just URL like where to get these URL links.
Check on the server side first where your web server is installed (I am assuming tomcat in your scenario). Use http://serverame:8080/BOE/BI and http://servername:8080/BOE/CMC (8080 is default port. If it has been changed use the correct port).
If its working well. Perform the same activity using ipaddress:8080 at server. Next chek whether using the same URL you are able to get BILaunchPad and CMC pages and able to login from the same.
6. We can't see SAP Lumira and SAP Dashboard on Service market place to install. Where we can find these software on Service maket place (https://service.sap.com)?
Software and downloads-->Installations and Upgrades
- D" SBOP DASHBOARDS (XCELSIUS)
7. Could someone please send screenshot to install Dashboard, Lumira, Analysis office and Crystal report enterprise and crystal report 2013.
Look into the admin guide for installation pre-requisites. These are available at Analytics Knowledge Center
We have a drop down for all products. Look for the guide and proceed with the installation.
8. Do we need to install all these on client machine?
Dashboard,Lumira,analysis office, CRE and CR2013 are client tools and hence need to be installed on client machine.
We also have CRS 2013 which is a server software and has to be downloaded from service market place. The li
9. Could you please give me software list which should be installed on client machine?
These vary according to user requirements. Check with developers for their softwares needed
10. As i know there is life cycle management tool but it is not even available from server side not even on client side. Could you please recommend how it can be installed??
In BI4.1 LCM comes by default. It is a server application. You can find it in CMC named as Promotion management and version management.
Use the admin guide and installation guide for all of the above. It will help you.

SCCM 2007 genarating duplicate client entry becuase of Same Hardware ID

Could any one explaine what is this hardware ID in sccm for client machine
How hardware ID is changing for same machine ?
where we can see hardware in machine ?
what is the importance of this hardware ID in software Distribution and advertisement in SCCM
shinu

As the name implies, the hardware ID is a unique ID generated based upon the hardware components of a system. The exact algorithm used to generate the ID is not publicly documented or disclosed. Generally, it will change if some hardware component of the
system is changed -- because the algorithm is not known, it's impossible to say what exactly will cause the ID to change so you just have to assume that any hardware change will cause it. You can see the ID is a lot of places including the properties of devices
in the console. The ID itself is meaningless for Software Distributions and Advertisements; however, if a device's hardware ID changes, then it will also be considered a new device and have a new resource generated for it within ConfigMgr. Depending upon how
you are targeting your systems with adverts, this could change what is targeted at that system.
Jason | http://blog.configmgrftw.com

SCCM- How to re-claim expired software updates in SCCM 2007 Sp2

Hi All,
I can see some on the software updates that are showing in "red mark" , but actually when i check the status of updates they are not expired. When i try to download or install those updates they are not getting downloaded SCCM throws an error message
as configuration manager throws an error message. Can anyone share the details on how we can re-claim these software updates.
Regards,

are you talking about windows updates or custom updates published through SCUP? where extactly are you checking status for these updates?
Prashant Patil

Deploying Internet Exlorer 8 using software distribution- for SCCM 2007 SP2

Hi,
I am trying to deploy Internet Explorer 8 in one of the clients having Internet Explorer 7.
But when i checked the execmgr.log, i found that the installation ended up with the following error.
"Program ran past its maximum runtime. It will be orphaned"
I even tried on other machine, but got the same error.
Pls. help.
Thanks in advance.

Hi,
It most likley means that the installation either is waiting for input or showing a dialog and waiting for input, therefor it runs past it's Maximum allow runtime value. I would start by allowing "users to interact" so you can see any error message. Could
be that IE is running?
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
is the deployment server.
I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
Message:There is an error in XML document (1, 331491).
Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
Please provide suggestions on this I need to resolve this ASAP.

Hi,
This question is better asked here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
Experts here are more familiar about it and they can give you more efficient suggestion.
Thank you.

How to set a default firefox homepage on client workstations on a network with a server running windows 2003 server?

I am running a small client server network with about 27 client machines and windows server 2003 is the server OS. I want the default webpage on firefox to display our department homepage when users log on. I have set IE7 already in the groups policy in the ISS section but this only affects IE7. Any idea how I can do this with Firefox?

You can set or lock default prefs via a mozilla.cfg file.
Pref: browser.startup.homepage , see http://kb.mozillazine.org/browser.startup.homepage
defaultPref(); // set new default value
pref(); // set pref, but allow changes
lockPref(); // lock pref, disallow changes
See http://kb.mozillazine.org/Locking_preferences

Group calendars on 10.6.4 client machines no longer work with iCal Server

After updating 2 client machines to 10.6.4 I realized my group calendars no longer work in iCal.
I get "Server Responded With an Error" on all my group calendars, on both machines.
Preferences>Accounts>Server Path reveles the server path has reverted back to a GUID "/principals/_uids_/GUID string/" .
I change it back to "/principals/_uids_/wiki-GroupName/" and get it working again, but if I quit iCal and restart it again reverts back to the GUID.
I've trashed all calendars in ~/Library/Calendars, and the Prefs. I also tried "/principals/wikis/GroupName/", but again it reverts.
I booted to my 10.6.3 clone and have no problems with the group calendars there.
(I'm running 10.6.4 Server)
Is anyone else having this issue?
Any ideas?

Are you asking for an example of how to use calendarservermanageprincipals? While the tool is designed to help you configure privileges on resources and locations, it works fine for users. So I created a new user in Workgroup Manager to represent my Marketing department's calendars. I named this user "sharedmarketing".
Then, I wanted to give staff read-only access to the calendar and give Marketing write access, so I executed these two commands:
sudo calendarservermanageprincipals --add-write-proxy groups:marketing users:sharedmarketing
sudo calendarservermanageprincipals --add-read-proxy groups:staff users:sharedmarketing
I then imported the content from the Marketing Wiki calendar into this calendar and that was it!
If I logged in directly to the sharedmarketing account (not necessary), and looked how the account was set to be delegated, it properly showed group names:
There is no way to configure it like this using the iCal GUI, and this was I always felt that the management of privileges was the biggest obstacle in setting up iCal Server in this proper, supported fashion.
Then, from the client, I can naturally access those group calendars:
This is SO much easier to setup and maintain as each user only needs to have their ONE iCal account configured and they can just add the necessary groups, which is WAY easier than supplying users with crazy wiki-calendar URLs.

SCCM 2007 SP2 R3 client on App V Server with Terminal Server

Similar Messages

Maybe you are looking for