SCCM 2007: SQL Clúster Add new nodes

We've installed SCCM 2007 with SCCM DB in a clúster SQL with two nodes (Node1, Node2)
We're going to add two new nodes Nodes3 and Node4. After, we'll remove Node1 and Node2 from Clúster...
I see that SCCM has two site system created (Node1 and Node2) and I don't know if SCCM will add the new nodes automatically when I add the new nodes to the clúster..
Any problem with this??

I have never done it and remote SQL is not best practice anyways.
http://technet.microsoft.com/en-ca/library/bb735870.aspx
So...
http://www.enhansoft.com/

Similar Messages

Add new nodes to IDoc in IDoc-XML Schema Mapping with Java

Hello everyone, I'm not very sure if this is the right forum but I have a problem and I haven't being able to find the answer, my scenario is as follows:
-First of all our system characteristics: SAP ECC 6.0, SAP BASIS 700, PI BASIS 2005-1-700 and SAP APPL 600
-We are in Mexico and we are creating our own billing documents with digital signature and a digital certificate in XML format according to SAP Note 1303712 and all derived notes.
-Our actual schema is working fine: We generate our IDocs (one for SD and one for FI) in SAP and we send them to PI XI to be parsed by a JAVA program and then converted to XML.
Now we have the requirement to add new nodes (I might be wrong in the term, feel free to correct me) to the IDoc, it sounds very simple but I have only experience with ABAP and no experience with PI, also it's working only on our production landscape, so if I don't do it right it could be very dangerous.
I have already read the following notes that might help me: 1321680 and 1318342 but their configuration is just in the aplication server and don't mention anything about PI or the Java program.
So, if any one could provide me some kind of guide or important aspects that I should take care (like mapping, structures, etc) to enhance IDocs for this schema i would be very grateful.
I hope this post were clear enough, if it is not also feel free to ask me to clarify or provide more information.
Kind Regards
Omar

Hi Omar,
Since the structure of the IDoc is changing (adding a new node), you would need to do the following in PI:
1) Reimport the IDoc in ESR/IR of PI.
2) Change the mapping/transformation logic in the mapping parser defined. If it is a Java code, you would need to reimport it in the ESR/IR. Use link below to understand more on jave mapping.
http://wiki.sdn.sap.com/wiki/display/XI/BeginnersguidetoJavamappingusingDOMparserinSAPXI
3) Delete the IDoc cache using transaction IDX2, after the IDoc is reimported.
Regards,
Sanjeev.

Add new node on vehicle master

Hello experts,
We have many custom fields on vehicle master and we can't add more than 99 custom fields on same screen (SAP restriction)
Now I want to add new node (like we have data Entry, Service, Document flow)
Once I add new node, we know how to add new tab and fields. But How can we add new node no Vehicle master?
Do we need to use one of below mentioned BAdI or some other and how to do it step by step.
BAdI: Exchange Vehicle Data Screen in Vehicle Detail
Or
BAdI: Exchange Configuration Screen in Vehicle Detail
Please advice.
Thanks

Hi ,
do you want to enhance DBM vehicle master or VMS ?
Regards
Ganesh

Add New Node - Adobe Director Microsoft Treeview Control 6.0 xtra?

Can some one help me on how to add new node to TreeView Control provided as xtra with Adobe Director. Tried using sprite(1).Nodes.Add but not working. Please assist

Right, I am accessing the control via Insert ->Controls -> ActiveX -> Microsoft Treeview. (unable to find any documentation)
I am actually trying to make a treeview and on selection do some stuff.
I have tried using CxtraPopup to create the same but when publishing it says unregistered version.
Can you please suggest any xtra that supports Menu.
Thanks

XMLType - add new node (simple question?)

Help me, please. I've spent much time on trying resolve this problem with no result... Give sample code please.
The problem is:
declare
vxml XMLType;
begin
vxml := XMLType('<A><B><C></C></B></A>');
end;
What I have to do in "[...]" to add new child-node to <C> node?
As a result I whant vxml: '<A><B><C><new></new></C></B></A>'.
And please:
- don;t say about updateXML because it works only in SQL-DML
- if You think it necessity to use dbms_xmldom, let me show how (I tried to use xmldom in many ways)
Thank you in advance

Please post this message at:
Forums Home » Oracle Technology Network (OTN) » Products » Database » XML DB

XI 3.1 SR3 on Solaris SPARC - using ccm.sh to add new node ?

Hi,
I'm configuring the XI 3.1 SR3 Integration for SAP component on my newly built BOE 3.1 SR3 environment and have a question on the "configuring SAP server side trust" part of the configuration. On page 91 of the Int Kit for SAP guide it states that :-
To configure BusinessObjects Enterprise servers
After you generate a PSE for BusinessObjects Enterprise, you must configure
an appropriate server structure for SAP processing. The following procedure
creates a node for SAP processing servers, so that you can set operating
system credentials on the node level.
Note:
In this version of BusinessObjects Enterprise, servers are no longer
configured in the Central Configuration Manager (CCM). Instead, a new
Server Intelligence Agent (SIA) must be created.
1. In the CCM, create a new node for SAP processing servers.
Give the node an appropriate name such as SAPProcessor. For
information about nodes, see u201CAdding a nodeu201D in the SAP BusinessObjects
Enterprise Administrator's Guide.
2. In the CMC, add the processing servers you need to the new node, then
start the new servers.
For information about adding and starting servers, see the u201CManaging
and Configuring Serversu201D chapter of the SAP BusinessObjects Enterprise
Administrator's Guide.
The trouble is that the BOE S.1 SR3 administrators guide for "adding a node" on page 63 describes the process on windows where the ccm GUI tools is used. On unix however the ccm.sh command line tool needs to be used and looking at the "ccm.sh -help" options I can't see anything listed that could be used to perform this add node procedure.
Can anyone suggest to me how I can setup this new node that is required so I can continue with the XI 3.1 SR3 Integratrion for SAP setup.
Regards,
Brian.
I'm new to BOE so please accept my apologies if this is a basic task.

Hi Seb,
thanks for this. I suppose I'm unsure on this due to me only just becoming involved with BOE, the Integration for SAP document isn't very clear on this process for setting up a new SIA. I checked with the project manager and this needs to be setup to enable their planned usage. I'll take a look at using the serverconfig.sh utilility to create a new SAPProcessors "node".
I'm assuming I can then use the CMC as per step 2 in the XI3 SR3 Integration for SAP guide, page 91 :-
To configure BusinessObjects Enterprise servers
After you generate a PSE for BusinessObjects Enterprise, you must configure
an appropriate server structure for SAP processing. The following procedure
creates a node for SAP processing servers, so that you can set operating
system credentials on the node level.
Note:
In this version of BusinessObjects Enterprise, servers are no longer
configured in the Central Configuration Manager (CCM). Instead, a new
Server Intelligence Agent (SIA) must be created.
1. In the CCM, create a new node for SAP processing servers.
Give the node an appropriate name such as SAPProcessor. For
information about nodes, see u201CAdding a nodeu201D in the SAP BusinessObjects
Enterprise Administrator's Guide.
2. In the CMC, add the processing servers you need to the new node, then
start the new servers.
For information about adding and starting servers, see the u201CManaging
and Configuring Serversu201D chapter of the SAP BusinessObjects Enterprise
Administrator's Guide.
Regards,
Brian.

OIM-SOA CLUSTER add new node

Hi All,
i need to add a new node to my cluster OIM/SOA.
My env is:
1) cluster 6 nodes whit SOA and OIM
2) the first node have a console weblogic server admin
3) More patchs are installed on
Look at this picture: [https://dl.dropboxusercontent.com/u/9054488/OIM-SOA-CLUSTER.jpg]
I found the proc to doc.id [e10106 pag.523 - 8.9.3.20.1 Scaling Up Oracle Identity Manager] but I don't understand if it is applicable to systems already patched.
There is a procedure already proven and clearer?
Thanks.

In order to add a new node, you must first install all the applications/modules in your middleware home. Install the same patches on top of those. Then using the packEnv scripts to pack up the domain, and then unpack it to your new host.
From the weblogic console, use the option to clone your app server and create a new machine for your new machine instance. Startup your node manager on your new machine, and start your app server.
You just need to make sure to do all the same modifications, if you have any, to your new server, like deploy jar files, make changes to UI interface, etc.
-Kevin

RAC add new node

Hi everybody...
Maybe somebody Knows, any case in wich, add a new node to a RAC configuration different of the rest.
That means the new node have less memory less CPU, can cause degradation to the current configuration.
Thanks.

As long as the h/w specs meet the min requirements, it will not cause any degradation to current configuration. However, say you have two node RAC having different h/w spec and one of them is down, you will face perf degradation anyhow (although it may be more visible if high-end node goes down).

SCCM 2007 SQL SSRS Custom Report Backup Automation

Has anybody tried to automate Configuration Manager 2007 SSRS Backup / Recovery process to a new hardware thru AfterBackup.bat? To backup and recover all custom reports
Manual:- .
http://technet.microsoft.com/library/ms155814(SQL.100).aspx
Thanks and Regards, Mohd Zaid www.techforcast.com

@ Simon - Thanks a lot, this helps. I will test for my environment and confirm the output. Meanwhile could you help me the steps for the restore part as this link only talks about the Backup SSRS. Below is what I have thought of shud work:-
1. Install SQL Server 2008 Reporting Services
2. Move the Report Server Database
3. Configure the Report Server
4. Create a reporting services point on a Configuration Manager 2007 site system computer (not sure if we need to create the folder on report server)
5. Configuring Properties for the Reporting Services Point
6. Copying standard Configuration Manager reports to Reporting Services (not sure if we need this when the SSRS database is recovered?)
Thanks and Regards, Mohd Zaid www.techforcast.com

HELP!!! add new node

Friends,
Suppose I have following xml
<?xml version="1.0" encoding="UTF-8"?>
<Organisation name="abc">
<employee>
<name>e1</name>
<age>20</age>
</employee>
<employee>
<name>e2</name>
<age>20</age>
</employee>
<employee>
<name>e3</name>
<age>21</age>
</employee>
</Organisation>
Suppose I have to add one more record to it at a particular location (not necessarily at the end)
<employee>
<name>e4</name>
<age>22</age>
</employee>
What is the preferred way to do it ?
XML file is very large in actual scenario.
Earlier I faced problems in reading my XML file using DOM (outOfMemory problem) so I used SAX. Now also I want to use SAX for this(JAXP). But I am unable to find any sample code for it.
Some people suggest to use JDOM in stead.
Pls suggest ASAP.
waiting
regards
Varun

Refer to
http://javaalmanac.com/egs/org.w3c.dom/AddNode.html

SCCM 2007 SQL Query for Advertisement Creation Date

I have been asked if I can create a Query to list all advertisements that have been created in a 60 day period and the User that created them.
I have tried a couple of SQL codes but I cant quite get the syntax to work.
Here is what I have so far, but I still don't know if any of it is usable:
v_Advertisement.AdvertisementName AS ‘Advertisement Name’,
v_Advertisement.AdvertisementID AS ‘Advertisement ID’
FROM v_Advertisement
INNER JOIN v_Package ON v_Advertisement.PackageID = v_Package.PackageID
INNER JOIN v_Collection ON v_Advertisement.CollectionID = v_Collection.CollectionID
INNER JOIN v_ClientAdvertisementStatus ON v_Advertisement.AdvertisementID = v_ClientAdvertisementStatus.AdvertisementID
AND v_Advertisement.AdvertisementID in(SELECT advertisementid FROM V_advertisement WHERE DATEDIFF(D, V_advertisement.presenttime,GETDATE())<=365)
ORDER BY v_Advertisement.AdvertisementName
Any help with this would be greatly appreciated.
Regards
AntonSK

I saw you're missing select statement.
Also, you need to know which table & column for these:
- Advertisement Creation date?
- User that created the Advertisement
a sample of working query as below, but it's still missing the 2 items above
select
Adv.AdvertisementName as 'Advertisement Name',
Adv.AdvertisementID as 'Advertisement ID'
from
v_Advertisement as Adv
inner join v_Package as Pkg on Adv.PackageID = Pkg.PackageID
inner join v_Collection as Col on Adv.CollectionID = Col.CollectionID
inner join v_ClientAdvertisementStatus as AdsStatus on Adv.AdvertisementID = AdsStatus.AdvertisementID
and Adv.AdvertisementID in(select Adv.AdvertisementID from v_Advertisement where datediff(d, Adv.PresentTime, getdate())<=365)
order by 'Advertisement Name'
---Pat

Add New Nodes

We have to add to our CW LMS 3.2 some WCS, WLS, ACS, FW.... but we only have HTTP or HTTPS credentials. Would that be enough to manage them? they appear as "?" and no configuration is downloaded...

No, this is not sufficient. You need at least SNMP read-only access to manage these devices. Note: Campus Manager will not support firewalls or the ACS appliance, so a '?' there is expected.

SCCM 2007 SQL templog.ldf

Hi Team,
I am facing problem past two days. My DB size is 70 GB but teplog.ldf occupying more than 130GB. I shrink the file now I got 120GB free space. 2 hour after it occupy same 130GB also my HDD space full.. Hw to check exact problem.
Thanks

Hi
We have managed 8000 client machines. I am using simple recovery model. below is the time ...
On 8/13/2014 12:05:17 AM, component SMS_SITE_SYSTEM_STATUS_SUMMARIZER on computer HQSCCM01 reported: SMS Site System Status Summarizer detected that the storage object "\\HQSCCM01\H$\Program Files (x86)\Microsoft Configuration Manager" on site system
"\\HQSCCM01" has 0 KB of free storage space, which is less than or equal to the Critical Free Space Threshold of 51200 KB.
Possible cause: The storage object is almost full.
Solution: Make more space available on the storage object by deleting unneeded files.
Possible cause: The Critical Free Space Threshold is set too high for this storage object.
Solution: Decrease the Critical Free Space Threshold in the SMS Administrator console by navigating to the Site Hierarchy --> IFC --> Site Settings --> Status Summarizers --> Site System Status Summarizer, right-clicking Properties, selecting the
Thresholds tab, and creating or adjusting the specific thresholds for this storage object.
SMS Site System Status Summarizer will now set the status of the storage object to Critical in the Site System Status summary in the SMS Administrator console.

SQL Server Distributed Partitioning Views how to add a new node online

We are using distributed partitioning views in SQL Server 2012 Enterprise Edition for scaling out our data across more than one servers. Now we faced to question how to add a new node (server) into the scale outed db servers system without sending the servers
down, so our users will be able to use them during the process as well.
For example we have 4 servers with scaled out data. When we add the new empty server, the CHECKINGs for the partitioning columns should be reorganized. But during the process the partitioning views are not working.
The High Availability, Always On or Failover Cluster approaches seem are not resolve the problems.
So my question is how to add new node online?
KH

Thank you Erland for the reply.
Yes, it's sounds as possible solution but has some not resolvable nuance in it. Let's say we copied some data from Node5 to new added Node6. Let's assume in Node5 we had data in Table1 with partitioning column's values 100,101,102,103,104,105,106. Now
we want to copy part of the rows with partitioning column's values 103,104,105,106 from Node5.Table1 into Node6.Table1. With this Node5 will contain less data and will work more quickly (less IO, less CPU usage etc), and the rest data will be contained on
Node6. But because of Node5 is already in use, the Node5.Table1 contains CHECK CONSTRAINT = ParttionColumn should be from 100 up to 106. This is check for Node5. The Distributed Partitioning Views are already using the CHECKs to identify what server should
be used to get data from.
Now when we copied part of the Node5.Table1 rows to Node6.Table1 the views are still using the 103-106 rows from Node5.Table1 because the CHECK points there. Then we include the newest Node6.Table1 in the distributed partitioning views. OK, but we should
set some CHECK on new Node6.Table1 which will be used by views. We can't set intersecting checking like Node5 has CHECK 100-106 and Node6 has CHECK 103-106. We also can't edit Node5 check and set it 100-102 untill the data will be removed in it. But this means
that the data will not be available during the execution.
So, any ideas ?
KH

AddNode when add database software to new node

Hi,all;
after add oracle clusterware to new node,I perform $ORACLE_HOME/oui/bin/addNode to add database software to new node.
but the commad it seem to add clusterware to new node again.how to fix?
cluvfy stage -post crsinst -n all
passed
detail of inventory.xml
<INVENTORY>
<VERSION_INFO>
<SAVED_WITH>10.2.0.1.0</SAVED_WITH>
<MINIMUM_VER>2.1.0.6.0</MINIMUM_VER>
</VERSION_INFO>
<HOME_LIST>
<HOME NAME="OraDb10g_home1" LOC="/opt/oracle/product/10.2.0/db_1" TYPE="O" IDX="2">
<NODE_LIST>
<NODE NAME="rac1"/>
</NODE_LIST>
</HOME>
<HOME NAME="OraCrs10g_home1" LOC="/opt/oracle/product/10.2.0/crs_1" TYPE="O" IDX="1" CRS="true">
<NODE_LIST>
<NODE NAME="rac1"/>
<NODE NAME="rac2"/>
</NODE_LIST>
</HOME>
</HOME_LIST>
</INVENTORY>
Edited by: Index.Lee on Sep 16, 2010 9:19 AM

Hi,ssolbach:
thank you.
environment is good.
You mean ./addNode copy Oracle database software to new node?
No,in fact,I can not continue the installation.
as well know, when add clusterware to new node, when GUI goes "add new nodes list",It will list the new member with hostname,host-vip,host-priv,
While add database software to newnode,the same GUI will display 'host_name' only.
the problem I meet is:
After finished add clusterware to new node, I add database software to new node. and when "add new node list",it dispaly new member with hostname,host-vip,host-priv. so that,I cannot proceed the installation.

SCCM 2007: SQL Clúster Add new nodes

Similar Messages

Maybe you are looking for