SCCM 2007 - Unable to download Windows Server Std 2012 Patches
I am having issues downloading Windows 2012 Std Patches but with 2012 R2 it is fine. I have to do it through WSUS which is on a separate server to get it work correctly. Anyone else experiencing the issue
Is this a CM07 or a WSUS question?
http://www.enhansoft.com/
Similar Messages
-
Publish Remote desktop through Microsoft VDI on Windows server std 2012
Hi
I have followed the steps, which you have mentioned in the below link. http://social.microsoft.com/Forums/en-US/partnerwinserver2012/thread/235594d6-a42d-4345-8a77-05481d8bc8bd#451ec885-bbff-4bf7-addb-983f22683c82
We have deployed 3 servers and tried to start the pooled managed desktop, it is showing an error in final stage. The error is " the integration components in the virtual desktop
template are not the correct version”. We have installed integration service setup and completed sysprep steps in windows 7 pro SP1 machine also.
Please let us know the furthers.
Edward Antony.D | Quadrasystems.net India Pvt LtdHi A
This means unless you updated the integration services on your Windows 2012 or Windows 7 VMs (and Windows Server 2008 R2), they will be running an older version of the Integration Services. Machine\Auto\IntegrationServicesVersion for the IC version,
or from the host by using this command:
To update the easiest way, extract the content from C:\Windows\System32\vmguest.iso from the Hyper-V host to a folder, then launch the setup.exe from the relevant support\<architecture> folder on each VM. For example:
\\server\ISCUpdate\amd64\setup.exe /quiet /norestart
Note that this will require a reboot of the VM at some point, but the /norestart suppresses.
Let me know if this helps you
Cheers -
Unable to install Windows Server AppFabric
Hello I am installing SharePoint foundation 2013 SP1 on Windows Server 2012 R2. I have run the prerequisite but it is unable to install Windows App Fabric and these are the logs for the same.
2014-06-14 13:57:33 - Reading the following DWORD value/name...
2014-06-14 13:57:33 - DCC
2014-06-14 13:57:33 - from the following registry location...
2014-06-14 13:57:33 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-14 13:57:33 - Reading the following DWORD value/name...
2014-06-14 13:57:33 - DCS
2014-06-14 13:57:33 - from the following registry location...
2014-06-14 13:57:33 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-14 13:57:33 - Reading the following DWORD value/name...
2014-06-14 13:57:33 - DCA
2014-06-14 13:57:33 - from the following registry location...
2014-06-14 13:57:33 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-14 13:57:33 - Beginning download of Windows Server AppFabric
2014-06-14 13:57:33 - http://go.microsoft.com/fwlink/?LinkId=235496
2014-06-14 13:57:35 - Size of download of "Windows Server AppFabric" in bytes is "33646240"
2014-06-14 13:57:35 - Download of "Windows Server AppFabric" completed successfully
2014-06-14 13:57:35 - configuring FTP/Windows Services for AppFabric
2014-06-14 13:57:35 - The current status of the service is...
2014-06-14 13:57:35 - SERVICE_RUNNING
2014-06-14 13:57:35 - FTP service is running...
2014-06-14 13:57:35 - Stopping FTP service....
2014-06-14 13:57:35 - The current status of the service is...
2014-06-14 13:57:35 - SERVICE_RUNNING
2014-06-14 13:57:35 - Waiting till the status of the service is...
2014-06-14 13:57:35 - SERVICE_STOPPED
2014-06-14 13:57:37 - The status of the service is now...
2014-06-14 13:57:37 - SERVICE_STOPPED
2014-06-14 13:57:37 - The current status of the service is...
2014-06-14 13:57:37 - SERVICE_STOPPED
2014-06-14 13:57:37 - Windows update service is stopped...
2014-06-14 13:57:37 - Starting Windows update service....
2014-06-14 13:57:37 - The current status of the service is...
2014-06-14 13:57:37 - SERVICE_STOPPED
2014-06-14 13:57:37 - Waiting till the status of the service is...
2014-06-14 13:57:37 - SERVICE_RUNNING
2014-06-14 13:57:37 - The status of the service is now...
2014-06-14 13:57:37 - SERVICE_RUNNING
2014-06-14 13:57:37 - Warning : Call to OpenService(...,SERVICE_START | SERVICE_QUERY_STATUS | SERVICE_STOP | SERVICE_PAUSE_CONTINUE) function to get handle to the service failed (0X424=1060)
2014-06-14 13:57:37 - Warning : [In HRESULT format] (0X80070424=-2147023836)
2014-06-14 13:57:37 - AppFabric caching service is not installed.
2014-06-14 13:57:37 - All services have been configured successfully for AppFabric.
2014-06-14 13:57:37 - Installing Windows Server AppFabric
2014-06-14 13:57:37 - "C:\Users\manoj\AppData\Local\Temp\App3B41.tmp.exe" /i CacheClient,CachingService,CacheAdmin /gac
2014-06-14 13:58:10 - Install process returned (0X643=1603)
2014-06-14 13:58:10 - [In HRESULT format] (0X80070643=-2147023293)
2014-06-14 13:58:10 - All services have been configured successfully after AppFabric installation
2014-06-14 13:58:10 - Last return code (0X643=1603)
2014-06-14 13:58:10 - Reading the following DWORD value/name...
2014-06-14 13:58:10 - Flags
2014-06-14 13:58:10 - from the following registry location...
2014-06-14 13:58:10 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-06-14 13:58:10 - Reading the following string value/name...
2014-06-14 13:58:10 - PendingFileRenameOperations
2014-06-14 13:58:10 - from the following registry location...
2014-06-14 13:58:10 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-06-14 13:58:10 - Reading the following registry location...
2014-06-14 13:58:10 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-06-14 13:58:10 - Error: The tool was unable to install Windows Server AppFabric.
2014-06-14 13:58:10 - Last return code (0X643=1603)
2014-06-14 13:58:10 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
command line options.
2014-06-14 13:58:10 - Cannot retry
Can someone please help on this
Thanks, ManojYes, This article helped me to fix the issue..
I have deleted the PSModulePath entry
from the 'Environment Variables' and re-run the installer.
It worked
Thanks, Manoj -
Trying to download windows server onto my computer.
I was able to burn an ISO for Windows Server 2012, but every time I try to download it says either my pc has encountered a problem and need to shut down or it issues a compatibility report. I follow the directions for report and then my computer reboots.
Could my computer not be able to handle it?Hi,
Do you mean that you cannot download Windows Server 2012 ISO file on your computer? If so, please try the link below to see if the ISO file could be downloaded correctly:
Download Windows Server 2012
http://technet.microsoft.com/en-us/evalcenter/hh670538.aspx
In the meantime, please provide the detailed information of the error message when you download the ISO file.
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I am trying to connect Windows 7 Pro 64 bit SP1 Computers to a Windows Server 2012 Essentials R2 domain and I receive the following error: "The server is not available. Try connecting to this computer again, or for more information, see Troubleshoot
connecting computers to the server." I have tried all of the steps in the Microsoft technet article "http://technet.microsoft.com/library/jj635102.aspx" and still am receiving this error. A little background on this specific case...
All of these computers were already attached to a different Windows Server Essentials 2012 R2 domain. They have all been taken off the existing domain and added to a workgroup. I have uninstalled the Server Essentials 2012 Connector and deleted
all log files. Has anyone else had this issue? Any help would be greatly appreciated! This is an urgent issue... Thanks in advance all!Would you be willing to run this script on your server?
http://gallery.technet.microsoft.com/Windows-Server-Essentials-556159c3
Also on a client to test connectivity?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+ -
Running Windows Server 2012 Essentials with an external usb 3 drive as a backup device. Using a Vantec hx enclosure with a WD Red drive. Last night the Dashboard saw the drive with about half the 4TB available for backup. A.M., I get "error code:
2147942403 The system cannot find the path specified".
Going to the server desktop, I see a message indicating that the usb device malfunctioned. unplugging it, and plugging it back in, I now have it available via the dashboard.
This has happened a couple times with two different drives in Vantec hx enclosures.
A couple possibilities come to mind:
the enclosures may both be bad...
there is some problem with the system software and external usb drive.
Thoughts?
Suggestions for external enclosures?
Thanks!Hi,
According to your description, my understanding is that you cannot backup the Windows Server Essentials 2012 and got "error code: 2147942403 The system cannot find the path specified". You found the usb device malfunctioned.
Can you backup the server when you unplugged the usb device, and plugged it back in? If you can backup the server when you replug the usb device, you need to engage the vendor to resolve the hard drive issues.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Best practices for upgrading Windows Server Essentials 2012 to R2?
Hi,
I need to upgrade my Windows Server Essentials 2012 on an HP microserver to Essentials R2 (specifically the R2 role on Standard rather than as a VM). After a reasonable amount of searching, I haven't found anything online that specifically addresses this in-place
upgrade scenario. Since this is already an Essentials server, it's the PDC in its own domain, etc. Has anyone that's done this upgrade have any experiences or warnings to share?
Thanks,
SeanHello there,
There is no upgrade path from Server 2012 Essentials to R2. R2 is not an upgrade, it is a new build. Essentials does not upgrade easily, you will want to perform a migration of the server. This will require additional hardware. You
can possibly backup the 2012 Essentials, build a temp server on workstation hardware just to do the migration from, restore the backup to the new server and then perform the migration to R2. -
Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.
From windows server 2012 and windows server 2008, Opened port 20,21,22 in firewall bidirectionally. After Establishing connection by passing credentials 230 log in successful.
ftp commands executing getting as " 425 Use Port or PASV first" , "500 Illegal PORT command".
But I could able to do windows client machines like windows 7 and windows 8 with same environment
Note : Firewall ports are opened. have tested by making firewall down to avoid filters.
Pandiyan MuthuramanHi Pandiyan Muthuraman,
Did you mean even you disable or open the related port the FTP issue still exist? I found this errors most time occur when we use the ISA firewall and the FTP configured passive
mode, if you have ISA firewall please refer the following KB to fix this issue.
How to enable passive CERN FTP connections through ISA Server 2000, 2004, or 2006
http://support.microsoft.com/kb/300641
The have a specific form for the IIS question, if you have the further IIS related question you can ask in IIS forum.
IIS support forum
http://forums.iis.net/
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
What are the netsh cmd line for windows server 2008,2012 ?
Hi
I am try to config ip,subnet,gateway,preferred and secondary dns using netsh for windows server 2008,2012,
Before Netsh cmd support for all os including Win 8,win 8.1.
I need to config form client machine to server machine using netsh cmd lines,i will try in remote login also like i will give server name,username and password with netsh cmd.Below is sample cmd line,using process i will change ip config.
netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1
when i run in windows server using cmd prompt it show error like "some commands line not found in specified file"
This is my code in asp.net using vb
Dim pip As New Process()
Dim pipa As New ProcessStartInfo("netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1")
pip.StartInfo = pipa
pip.StartInfo.UseShellExecute = False
pip.StartInfo.RedirectStandardOutput = True
pip.Start()
pip.WaitForExit()
And if change ip,subnet and default gateway,internet not work,if i change preferred and secondary dns then only internet work and can browse.
I can change ip,subnet,gateway,both dns is some other way,below is the link
http://www.codeproject.com/Questions/795642/How-to-change-IP-Subnet-Gateway-DNS-Prefers-and-al?arn=0
but what problem is if server is logoff,changes not reflect in server machine,may be it logoff.
So i need is if server is logoff,need to change ip,subnet,gateway and both dns using netsh or some other vb codings in asp,net.I am try to change ip address form client machine also.
Pls reply asap
Regards
AravindFor the shell scripting I'd try them here.
Scripting forum on MSDN
Scripting Guys forum on TechNet
For the asp.net I'd ask over here.
Microsoft ASP.Net forums
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Windows Server Standard 2012 downgrade to windows 2008 r2 ent. hyper-v vm support
Dear All,
please suggest what i have to purchase for running more than 4 vm in downgraded windpws 2008 r2 ent
if i purchased Windows Server Standard 2012 SNGL OLP NL 2 Processor and installed in one ibm server with downgrade OS windows 2008 r2 & wants to use more than 4 vm on this server.
then what is the way & which license i need to purchase.
pls help
Sunil
SUNIL PATEL SYSTEM ADMINISTRATORi have 2 nos license of Windows Server Standard 2012 SNGL OLP NL 2 Processor
if i want to run 8 vm then need another 2 lice..of same??
its depends on processor???????
pls confirm..
SUNIL PATEL SYSTEM ADMINISTRATOR -
I have downloaded "Windows Essentials" and now I want to download "Windows Live Mail 2012" How do I do it ? I currently have it on my desk top and I would like it on my PC . .
This one may help.
https://support.office.microsoft.com/en-GB/article/Set-up-email-in-Windows-Live-Mail-2011-or-Windows-Live-Mail-2012-35af1bfa-7e4a-4d9a-9b42-38d486cb5f4f#__toc340043458
Or try asking them here.
http://answers.microsoft.com/en-us/windowslive/forum/livemail?tab=Threads
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Unable to Install Windows Server 2012 on Windows Server 2008 R2 SP1 Hyper-V
My attempts to install are failing with a message "Windows cannot install required files. The file may be corrupt or missing....Error code: 0x800705070".
I am posting this on the Wondows 2012 Server forum but I have had exactly the same problem as described below with Windows 2008 R2 SP1.
As the title says this is on a Windows Server 2008 R2 SP1 host with all current updates. I have downloaded the ISO file from a Technet subscription file twice, once by direct download and once by the Akamai downloader. The virtual disk is connected with
the default IDE driver. I mounted both installation images as ISOs, located on a file system on the host server. I have tried installs by deleting the VM and recreating both the VM and a new virtual disk, re-using a previously created virtual disk, and
deleting the partitions in a previously created virtual disk, and executing the format command, and then attempting the install.
I have exactly the same problem trying to create a Windows Server 2008 R2 SP1 VM on the same host OS. With those attempts, I downloaded the Technet subscription iso 4 or 5 times, and burned one to a DVD which I attached to the created VM. Same
error message.
The virtual machines and virtual disks I created and used were all located on an RAID5 array, on a builtin Intel RAID controller using Intel Rapid Storage Technology software version 11.2.0.1066. The host Windows Server 2008 R2 SP1 uses this file system
but the OS is installed on a dedicated drive (C).
I had previously created a guest VM with Windows Server 2008 R2 (several months worth of updates ago) without drama.
I have spent hours reading forums and blog articles on this. A common response is to download the iso another time, and/or burn it to a DVD instead of mounting an iso image. Although I didn't do the later yet with 2012 Server, but I have done these
other steps attempting to install Windows 2008 Server SP1. The install process takes a while (not to mention doing multiple downloads). Given this seems to be a common recommended remedy, and indeed based on posts does seem to eliminate the problem is some
cases, why doesn't somebody change the Microsoft installer program so it does a thorough integrity check at the beginning of the install process?Jeff,
After the exercise of Windows 2012 Server successfully installing (as I described above) I also successfully installed Windows 2008 R2 on Hyper-V. From my standpoint, I have eliminated the problem (which isn't the same as correcting the problem).
The answer to your specific question regarding Hyper-V support is that the motherboard I am using, an Asus P5Q, is not supported by Windows 2008 R2 because it doesn't use ECC memory, and the vendor doesn't say it supports Windows 2008. But I am sure you
know the motherboard vendors often don't test older motherboards with newer software versions. It appears that in specifying ECC memory Microsoft is trying to protect users of Windows Server from hurting themselves, not saying the software won't run.
Having said that, my suspicion in the beginning was, and still is, that it was some variable(s) left in an unknown state in the Hyper-V environment, which was why after trying to install Windows 2008 R2 several times I tried Windows 2012 which resulted in
the same error, and then encountered the same error trying to install Windows 7 on the same Hyper-V installation. The specific Hyper-V Windows 2008 R2 server had run without any operating problems for months before I started having trouble, and although it
had been quite a while since I had created VMs, that process used to work. The hardware didn't change. What changed was applying updates through Microsoft Update, and a few access control rights I changed, and at least I think, I set back to their original
value.
So in short, no, my hardware isn't supported by Windows 2008 Server. Two, your assertion that you are running the same software configuration that I am is very unlikely to be true. There are an extremely large number of things which are different between
your test system and mine, such as which Windows 2008 components are installed, what updates were installed and in what order they were installed, and what other third party software each of us is running, and between AD, and all the features, a large number
of potential differences in ACLs, options, etc. and I don't for a minute think this particular problem was caused by the underlying hardware.
I do appreciate your taking the time to try to help me, and I hope there is one thing you and I could agree on. Microsoft could pretty easily make it much easier to isolate problems. In this day and age reporting hex error codes (as opposed to doing the
table lookup in the error handling proc), and not providing more diagnostic information seems to me to be almost quaint. And in this case Microsoft can dismiss my problems on the grounds it was all on unsupported hardware. Unfortunately, I think they
are missing an opportunity to make their software better, because in my opinion what I encountered there are a set of conditions which will cause installations to fail that aren't going to get corrected. -
Unable to download windows 7 support software for macbook pro
I was able to install Windows 7 Home Premium and also partitioned the HD. After that I have been trying to download Windows support software through Bootcamp into a properly formatted pen drive. The download progresses to about 20% of the bar showing progress and then just freezes. I checked the internet connection but it is working fine. Not sure if the file sizes are huge(the progress bar doesn't show any details about how big the file sizes are). Left the mac book running for more than 3 hours but no progress. Any suggestions? Am I doing something wrong?
The Windows 7 installation doesn't have any drivers so i am unable to even connect to the internet through an ethernet connection.The Boot Camp assistant created an extra partition, then just stopped. It didn't move forward with installing Windows. Now I have a BOOTCAMP partition and a few options for installing Windows. I have a DVD I burned, and an ISO out on a USB HD formatted for FAT. But I'm not sure how to go about installing Windows now. I did this once before a few years ago but don't remember the steps. I want to install Windows onto the boot camp partition. Would you happen to know how I can proceed?
I tried holding down the Option key upon boot and selecting the Windows DVD but it just hung there on the Apple logo. Only way to boot was to hold Option and select my main HD. -
Outlook 2007 PDF preview on Windows Server 2003?
Simple question. Does the new (Reader 8.1) PDF Preview feature for Outlook 2007 work in Windows Server 2003? Or is it only for XP and Vista? The patch notes strongly suggest the latter, but in other places (such as a blog on this site) there are notes explicitly stating that the feature should work in server operating systems.
We happen to be running Citrix (PS4.5) on this server as well, but I'm not convinced that's material: the feature doesn't work running Outlook on the server's own console.
When I attempt to preview a PDF in Outlook 2007, I am told, "This file cannot be previewed because of an error with the following previewer: Adobe PDF Preview Handler".
Before I go much farther with troubleshooting this, can anyone confirm firsthand that PDF previewing works in Outlook 2007 on Server 2003?I was using Adobe Acrobat Professional 8.1.2 and Outlook 2007 on Server 2003 SP2 and the Adobe PDF Preview Handler worked.
Unfortunately, it stopped working after some time and I'm pretty sure I did not make any changes to the system. However, I did try to uninstall, reinstall and update Adobe Acrobat but still, it does not work.
Any ideas why this is happening how to resolve it?
Many thanks. -
Unable to stop Windows Server Backup
WSE2012. Backup regularly hangs while trying to back up one of our server disks to an external usb drive. Both source and destination drives check out ok - no fragmentation, disk errors, plenty of free space. Tried to Stop the backup gracefully
via the UI by right-mouse clicking the server listed in Dashboard>Devices tab and choosing Stop backup... but this is unable to stop it.
Tried to stop the block level backup engine service exe (wbengine.exe) but it appears to be orphaned and unkillable.
Task Manager shows wbengine.exe is running, so I've tried doing these things from an elevated command prompt:
1. wbadmin stop job -- this returns The process could not be terminated. There is no running instance of the task.
2. TASKKILL /F /IM wbengine.exe - same error message as above.
Short of rebooting the machine or unplugging the usb drive (which sometimes works but leads to data corruption), how can the backup be stopped and restarted?Mandy,
Thank you but no such luck. We're running Windows Server 2012 Essentials and we don't have 3rd-party software running on the server except for BackupAssist. We started with wbadmin, have moved to trying BackupAssist (BA), now am working with
their support team. Latest suggestion is to go back to native Windows Server Backup. But I have seen this issue before we installed BA. I will wait until we duplicate the problem there before responding here again, but my best solution is
to either unplug the backup drive (forcing a cancellation) or reboot the server. This has really got us baffled.
Maybe you are looking for
-
Java XML Parser:Null Pointer exception in EntityReader
I got NullPointer Exception when trying to parse a XML file which is pointed by a net URL, (say "http://www..."). The code causing problem is like: parser.parse(new URL("http://www.../demo.xml")); the exception I got is: java.lang.NullPointerExceptio
-
Populate Flex Tree from Java Code (Database)
Hi Can someone please help me? I'm very new to using flex. I'm basically trying to create a tree that is populated from data in my database. I am using hibernate to fetch that data. The plan is to basically create the tree in Java code (since I don't
-
Change/Edit Request Attributes in CUP at Approval Stage
Hi All, We have SAP GRC AE/CUP 5.3 SP07 installed in our environment. In our work flow of the request, there is a requirement that some of the request attributes need to be changed by the role owner/ approver at the approval stage of the request. The
-
License for Flex 3 Data Visualization Components
Hi, Where can I get the serial number for Data Visualization Components in Flex 3? Thanks.
-
My time machine always stops at some point... It always shows this message: "Time Machine Error. Unable to complete backup. An error occurred while copying files to the backup volume. I have tried everything and even did time machine in safe boot as