SCCM 2012 and Exchange 2013 Connector

Hello all,
I hope that you are well!
I have an issue that I can't explain for the moment, maybe someone can help me.
Actually we have SCCM 2012 SP1 and Exchange 2013 Enterprise in our LAN.
Now I did the configuration within SCCM of creating a new Exchange Server Connectors, everything seem's to be okay, no warning, no active alert, the Exchange server connection account and so on..
But I can't see the mobile devices from my user into the All Mobile Devices within SCCM 2012.
Do I miss something into this specific configuration, certificate or something related !
Best regards to all of you
Stephane

Hello Gerry,
This is what I got on EassDisc.log
ERROR: [MANAGED] Invoking cmdlet Get-Recipient failed. Exception: System.Management.Automation.RemoteException: Cannot bind parameter 'Filter' to the target. Exception setting "Filter": "The value "$true" could not be converted to type System.Boolean."~~
at System.Management.Automation.PowerShell.CoreInvoke[TOutput](IEnumerable input, PSDataCollection`1 output, PSInvocationSettings settings)~~   at System.Management.Automation.PowerShell.Invoke(IEnumerable input, PSInvocationSettings settings)~~
at System.Management.Automation.PowerShell.Invoke()~~   at Microsoft.ConfigurationManager.ExchangeConnector.Connector.Invoke(PSCommand cmd)
ERROR: [MANAGED] Exception: Cannot bind parameter 'Filter' to the target. Exception setting "Filter": "The value "$true" could not be converted to type System.Boolean."
ERROR: Failed to check status of discovery thread of managed COM. error = Unknown error 0x80131501
But that is old error, since I configure the Account properly
Regards to you,
Stephane

Similar Messages

SCCM 2012 SP1 and Exchange 2013 Connector Get-Recipient cmdlet failed

I have been trying to get my Exchange Connector working with SCCM 2012 SP1 for a week or so now. Every post tells me that the Get-Recipient cmdlet failed is a security permissions error. I have given the service account running the connector full Exchange
Server Management rights including Recipient Management and Organization View-Only. I have even tested remote power shell to the CAS server and run the cmdlet with no issues.
For some reason it just does not want to work for me. Has anyone been running into this issue?

Now before you read the following error and say oh this is a permission issue I am telling you it is not. I have given the account full Exchange admin rights and I have even tested the Get-Recipient cmdlet remotely to the Exchange server and it works with
no issues. I have also noticed multiple forum posts with the exact same issues.
I have noticed one thing that stands outs "Cannot bind parameter 'Filter' to the target. Exception setting "Filter": "The value "$true" could not be converted to type System.Boolean"
I believe this issue may be related to changes in the powershell commands with Exchange 2013, but I do not know where or how to edit the ps1 script.
I am getting the error below:
ERROR: [MANAGED] Invoking cmdlet Get-Recipient failed. Exception: System.Management.Automation.RemoteException: Cannot bind parameter 'Filter' to the target. Exception setting "Filter": "The value "$true" could not be converted to
type System.Boolean."~~ at System.Management.Automation.PowerShell.CoreInvoke[TOutput](IEnumerable input, PSDataCollection`1 output, PSInvocationSettings settings)~~ at System.Management.Automation.PowerShell.Invoke(IEnumerable input, PSInvocationSettings
settings)~~ at System.Management.Automation.PowerShell.Invoke()~~ at Microsoft.ConfigurationManager.ExchangeConnector.Connector.Invoke(PSCommand cmd)
SMS_EXCHANGE_CONNECTOR 9/19/2013 12:00:01 AM
4200 (0x1068)
STATMSG: ID=8817 SEV=W LEV=M SOURCE="SMS Server" COMP="SMS_EXCHANGE_CONNECTOR" SYS=MySite SITE=MySiteID PID=xxx TID=xxx GMTDATE=Thu Sep 19 07:00:01.653 2013 ISTR0="Get-Recipient" ISTR1="ParameterBindingFailed,Microsoft.Exchange.Management.RecipientTasks.GetRecipient"
ISTR2="Cannot bind parameter 'Filter' to the target. Exception setting "Filter": "The value "$true" could not be converted to type System.Boolean."" ISTR3="" ISTR4="" ISTR5="" ISTR6=""
ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_EXCHANGE_CONNECTOR 9/19/2013 12:00:01 AM
4200 (0x1068)
ERROR: [MANAGED] Exception: Cannot bind parameter 'Filter' to the target. Exception setting "Filter": "The value "$true" could not be converted to type System.Boolean."
SMS_EXCHANGE_CONNECTOR 9/19/2013 12:00:01 AM
4200 (0x1068)

Server 2012 and Exchange 2013 Migration from SBS 2011

Server UpgradeI'm migrating an SBS 2011 server to a new machine with Server 2012 R2 and a Hyper-V server running Exchange 2013. I've set up the new machine, all is running well in a test environment. I now want to migrate the old server to new. These are the steps I'm going to take and I wanted advice for any modifications or errors. 1. Demote DC on Server 2012 that I set up to test. 2. Join new Server 2012 to existing SBS 2011 domain. 3. Promote Server 2012 to DC. 4. Join the Hyper-V Server 2012 to the Server 2012 domain.5. Migrate Exchange 2010 on the SBS 2011 Server to Exchange 2013. 6. Transfer FSMO role from SBS 2011 Server to Server 2012 DC. I'll copy shared data files using robocopy.The only things I'm not sure about is the FSMO order, when to do that and the fact that I already have Exchange 2013 installed in the test...
This topic first appeared in the Spiceworks Community

I recently acquired a SuperMicro chassis that has a SAS2 expander backplane. It has SFF-8087 ports on it.http://www.supermicro.com/manuals/other/BPN-SAS2-846EL.pdfI made a post on another forum and someone mentioned that the card couldn't be used with that backplane since it's a SATA controller, however, the backplane is both SAS and SATA device compliant, it's only the RAID controller, as far as I know, that is a "SATA II" controller, and not a SAS controller.So, I couldn't find anything in the official documentation of this controller on whether or not it was able to control SAS devices. The card itself has a 3 SFF-8087 ports though, couldn't this theoretically still be used with a SFF-8087 to SFF-8087 cable(seen below)since the backplane is a SAS/SATA backplane?...

SCCM 2012 and Exchange Connector some how getting wrong domain when associating devices to users

I happen to go to the SCCM software catalog site and click devices and noticed that my mobile device was not included.
After finding my device in All Mobile Devices I found the following:
For my device the connect assigned Foo\UserName where it should have actually been Bar\UserName.
Our domain is foo.domain but when we log in to computers we use bar\Username. If I login as
[email protected] authentication works.
So how do I get the SCCM Exchange connector to select Bar\UserName and not foo\username? I'm guessing that this is actually an Exchange issue but I figure I would ask here first.
Thanks!

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 and MDT 2013 PreFlight Checks

Hi,
Can anyone help me with a preflight check in MDT (Winpe) checking for an Active Directory Computer account. By default the pre-flight is before the page which has the field for entering the computer name. If I was to move the page later in the wizard sequence
would I be able to use the variable OSDComputerName. Additional does anyone have any Powershell or vscript code which could query AD for the computer account existence?
As I'll need to authenticate with AD I could use the variables OSDJoinAccount, OSDJoinPassword, OSDDomainName.
Mike

Hi,
Please refer to the link below:
MDT Scripts, Front Ends, Web Services, and Utilities for use with ConfigMgr/SCCM
http://mdtcustomizations.codeplex.com/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Migrate to Windows 2012 R2 and Exchange 2013 SP1 using database portability

Hi, I'm planning to migrate from Exchange 2013 SP1 running on Windows 2012 to Exchange 2013 SP1 on Windows 2012 R2.
Is it possible to use database portability to move the databases from the exchange installation on win 2012 to the new installation on Win 2012 R2? This would save a great deal of time not doing the mailbox moves.
I've searched similar cases but couldn't find any, all speak about disaster recovery and database portability but I've found no articles that uses the migration scenario.
Would it be possible to do and if so, what would the steps be? Do I need to delete the database from the source server, move the database files to the new server and mount them and relocate the mailboxes? Or should I dismount the database on the source server,
move them to the new server and mount them and relocate the mailboxes?
Frank.

Hi,
According to your description, I recommend you consider using DAG to achieve your requirement.
The following steps for your reference:
1.Prepare a new server which installed windows 2012 R2 for Exchange 2013 mailbox server.
2.After you deploy Exchange 2013 Mailbox servers, you can create a DAG, add Mailbox servers to the DAG, and then replicate mailbox databases between the DAG members.
3.After replication, you can mount all the databases on the new server.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support
This no way a resolution. This won't work at all as Both OS will be different and you can't form the Cluster.
Please Unmark it!
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Create failover cluster to host Windows 2012 DC, Exchange 2013 and SQL as VMs

One of our clients has running Windows Essential 2012, SQL and exchange 2007 as VM on VMware for 4 years without major issue. However, the physical server is getting old and have some hardware issues recently. They have budgets to buy two Dell servers, EqualLogic
SAN, Windows server 2012 Datacenter and Exchange 2013. Is it possible for them to create failover cluster to host Windows 2012 DC, Exchange 2013 and SQL as VMs?
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.howtonetworking.com

We will move all VMs from VMware to Hyper-V. Thank you.
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on <a href="http://www.chicagotech.net">http://www.ChicagoTech.net </a>
How to Setup Windows, Network, VPN & Remote Access on <a href="http://www.howtonetworking.com">http://www.howtonetworking.com </a>

Install AD / SQL Server 2012 and SharePoint 2013 on a single server as Development Environment

Hi All,
I'm planning to prepare a SharePoint 2013 development environment. The current idea is to install Domain controller, SQL Server 2012 and SharePoint 2013 all on a single server. Even though this is for development purposes,
would there be any limitations specially when it comes to SP 2013 functionalities according to your experience?
Some articles i referred.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
http://social.technet.microsoft.com/Forums/en-US/f438c9a6-02e8-43d3-9963-7a0608f0b961/sharepoint2013-on-domain-controller
Thanks,
Dilip

Hi
i understand this is a sandbox environment but you should be able to install everything.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

ACE 4710 and Exchange 2013

Greetings everyone.
I am curious if anyone has any experiences with Exchange 2013 and ACE SLB functions. I know they changed to RPC over HTTPS on exch side and few other items changed as well. I do not forsee any issues just looking to see if anyone has any feedback from a production deployment.
Thanks
Joel

Joel, I checked internally and only located one case raised against ACE and Exchange 2013. The issue was resolved via defect CSCuc98599 "ACE randomly resets POST requests with SSL offloading". Use A5.2.2 or apply workaround (increase maxparselen to 65k). Matthew

Database instance for SCCM 2012 and WSUS on a single primary site server

I am going to install SCCM 2012 and its SQL database on a single physical server. This is going to be a single primary site server. The default SQL instance will be dedicated to SCCM 2012 with no other named instances to be added on the SQL server down
the road.
During the WSUS server role installation, there is the Database Options page asking for using (1) Windows Internal Database, (2) existing db server on this computer, or (3) an external db server.
Since SCCM 2012 doesn't share db instance with others, how should I handle the WSUS db that's going to be hosted on the same SCCM/SQL physical server? Do I really need to create a separate SQL instance just for the WSUS db?
Thanks and regards.

Even though you can do it, it is the best practice to have SCCM 2012 and WSUS installed on separate instances.
http://technet.microsoft.com/en-us/library/hh692394
When the Configuration Manager and WSUS databases use the same SQL Server and share the same instance of SQL Server, you cannot easily determine the resource usage between the two applications. When you use a different SQL Server instance
for Configuration Manager and WSUS, it is easier to troubleshoot and diagnose resource usage issues that might occur for each application.

SCCM 2012 and Reverbed appliances

There is a requirement to have the Riverbed WAN acceleration appliances installed instead of Distribution Points.
For the fresh setup of SCCM 2012 that we are working at the moment. The initial proposal was with one Primary Site Server and number of distribution points
however client wants to go with the Reverbed appliances and not to use distribution points.
Would like to know and get the confirmation from Microsoft that if Reverbed appliances are supported fully with SCCM 2012 and if any recommendations on this.
Thanks.
Gurudatt

Hi,
If you want an offical answer from Microsoft if it is supported and recommended you should really open a support case or perhaps an advisory case with Microsoft Support. You will not get an offical statement here and for Microsoft to fully support it would
mean that they would have tested it as well.
There are some information regarding that it will work on riverbeds page
https://splash.riverbed.com/thread/2723
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012 and collection settings

Hi all,
I am migrating SCCM 2007 to SCCM 2012 SP1 CU3.
All my 1200 collections are migrated to SCCM 2012 and the incremental option is enabled on most of my collections (about 1100).
Now I found out that my collections are updating very very slow.....
I read an article that best practice is to enable a maximum of 200 collections with the incremental option.
So i ran a powershell script to disable this option on my collections....
Now it seems that collection updates are faster again...
Do I need to disable the incremental option on all collections and enable the schedule full update eg. very 30 minutes ?
I hope someone could share his experience with this....

I ran this test this weekend since it has been a while since I have do this. Short version, yes I’m getting confused between CM07 and CM12. CM07 this work perfectly for User and PCs. In CM12 this only work perfectly for Users. If you want
to make this work for PC you need to do the following.
PC
Add the PC to the Security Group.
Wait of the Security group to replicate to the PC’s local DCS.
Reboot the PCs
Wait for the Discovery Data(DD) collection Cycle to occur, (default is every 7 days), However I recommend making this daily and in some cases hourly.
Once the DD data is in the CM12 db. You need to wait for the Collection to update (default is every 7 days)
Then you need to wait for the PC to retrieve it’s Machine policies. (~1 hour)
User:
Add the User to the Security Group.
Wait of the Security group to replicate to the PC’s local DCS.
Logon to the PC. With newer OS , just unlocking the PC will
do the trick.
Then you need to wait for the User Polices to retrieved.(~1 hour)
http://www.enhansoft.com/

Difference between late-2012 and early-2013 mbp retina 13"?

I just bought the early-2013 mbp retina from the refurbished section of the mac site.
It seems to be v. difficult to get detailed info on this model. Most web queries about aspects of this model bring up info on the late-2012 model.
Is this some sort of freak model that was a limited run?
One of the main reasons I ask is that I have a 512gb SSD, and I'm looking to replace it with the 768gb SSD module. The SSD module I am looking to buy advertises itself as being compatible with the late-2012, but no mention of early-2013.
The late-2012 and early-2013 share the same model number (A1425), should I assume they carry the same architecture under the hood?
**Before you reply**
- Yes, I know I'm not supposed to open the computer, might void the warranty etc.
- No, I didn't have the option of the 768gb SSD when I bought it, it was already assembled. I got it cheap.
- Yes, I am aware that SSD upgrade is an expensive option.
- Yes, I am aware I can store additional data on an external HDD.
- Yes, I am aware I can boot from a higher capacity external HDD.
- No, I don't want to know about alternative options, just the one outlined in the original query.
Thanks.

didvid.s,
the technical specifications for the two models are here and here. Contrast and compare them to your heart’s content.

SCCM 2012 R2 Office 2013 deploiement 64 bit and 32 bit versions

We have some
Windows 7 64bit os with office 2013 32 bit
also
Windows 7 32bit os with office 2013 32 bit
We need to deploy office 2013 32 bit all over with sccm 2012 r2
what's the best way for the deployment
we also want to be sure to keep all user data for outlook. we don't want to loose that
can I install a 32 bit office and in the setup /admin use uninstall and everything will work

setup.exe /admin is the tool to use when customizing the deployment of Office; especially when deploying through SCCM.
The way I saved user profile data is to set it to Use Existing Profile under Outlook Profile of setup /admin
Yes, I have the default setup behavior box checked so it removes all previous Office version applications.

Deploying Windows Server 2012 and Exchange Server 2013

Hi All,
Our Clinet is planning to implement Exchange Server 2013 as an email solution. There is no Active Directory Domain exists in the environment. So, we have planned to configure a Windows Server 2012 R2 Standard as a Domain Controller and Exchange
Server 2013 Standard would be installed on another Windows Server 2012 R2 Standard.
The setup would be for 250 users. Please guide me about the Cost of OS + Exchnage and CAL for 250 Users.
Warm Regards,
Prosenjit Sen
Thanks & Regards, Prosenjit Sen.

Another option would be to consider signing up for Office 365 instead of setting up the hardware and software for such a small number of users. It will take a long time for the cost of the hardware, maintenance, and support to be less costly than Office
365, if it would ever be less expensive. There is a lot of maintenance required for Exchange, so unless your client already has someone experienced in configuring and maintaining Exchange, there is a lot of expense in bringing someone up to speed to
perform those functions capably.
Just a suggestion. I do not work for Microsoft and I have no financial incentive to propose an Office 365 environment. I just know that if I were running my own business, I would have to be convinced that my business required its own internal
mail system when there are so many fully functional and capable mail systems available via subscription.
. : | : . : | : . tim

SCCM 2012 and Exchange 2013 Connector

Similar Messages

Maybe you are looking for