SCCM 2012: Asset Intelligence inventory of App-V application?
SCCM 2012 Sp1: Asset Intelligence inventory of App-V application?
I do see App-V applikations in AI reports, but somtimes they missing and only MSI apps are showed. In a step to find the reason reason is ther any prerequsite for the client, like minimum build for App-V 4.6 or somthing else?
/SaiTech
Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ
Similar Messages
-
SCCM 2012 Asset intelligence: should we use it?
Hi,
I'm looking at the asset inteliggence feature of sccm 2012. The question is if we should spend time configuring it or not.
Therefore this question: do you use it? If yes, what is the added value and can you refer to some screenshots which summarizes the features?
Thanks.
J.
Jan Hoedt> spend time configuring it or not.
The time it took to ask the forum question is longer than it takes to add the role and configure it.
If you don't use it, many of the built in reports are missing data. Just to save yourself the time of having to explain that to people using the reports is usually justification for adding the role and enabling key classes like Installed Software.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you found a bug or want the product to work differently,
share your feedback.
<-- If this post was helpful, please click the up arrow or propose as answer. -
SCCM 2012 Asset Intelligence Report 14A Downgrade Rights not calculated
Hello,
In SCCM 2012 the License Reconcilation Report cannot calculate downgrade rights like it was the same problem in SCCM 2007:
http://social.technet.microsoft.com/Forums/en-US/configmgrai/thread/9c6c74cb-9bdc-4a7b-92af-feca7397a5fb
I tried this solution but the view V_CAL_User isn't existing anymore in 2012 so i cannot execute this query:
http://myitforum.com/cs2/blogs/idany/archive/2008/10/16/improving-microsoft-volume-licensing-reconciliation-report.aspx
So can you help me experts?
ThanksYes I know this is an old post, Cal tracking has been removed from CM12 AI and no longer exists.
Also within the forum post you will notice that I say there is no downgrade right listed within CM12/CM07 AI. If you feel this is important then I suggest that you submit a connect item. Post the link back here for other to vote up.
http://www.enhansoft.com/ -
Asset intelligence: inventoried software, based on add/remove programs?
Hi,
Please clarify where asset intelligence, inventoried software gets its data: is it reading add/remove programs
(software metering is checking .exe but inventoried software ...)?
J.
Jan Hoedthttp://msdn.microsoft.com/en-us/library/cc144824.aspx (This article still applies to CM12).
Torsten Meringer | http://www.mssccmfaq.de -
Asset Intelligence, Inventoried Software is empty
Hi!
I've been spending the whole day trying to find a solution to this problem.
We have been three people looking at it, verifying every single setting there is, but "Inventoried Software" is still empty.
The classes have been marked and the clients inventory every single application.
If I run Asset Intelligence reports I get all the data, so it is inventoried. For example the report to list inventoried softwares that falls under a specific category.
The server is running CM12 R2 with CU1, but I get the same problem in my own lab that runs R2 with CU3.
I've checked every log I can find and they are looking okay, no errors, nothing.
Does someone have an answer to this?
Best regards
Andreas Molin
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molinThanks for the help all! It took something neither of us had, patience!!
Today the applications has started to roll in and all is well. I've added this feature many times before, but it has never taken this long for the list to populate... It came to mind that this is the first time I've done it on the R2 version, could it be
that this is the reason it takes so long?
//Andreas
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin -
Coexistence of the SCCM 2012 R2 client and the App-V Full Infrastructure Model
Our environment currently has the App-V Full Infrastructure Model deployed with Windows 7 clients using hundreds of App-V apps. We plan to deploy SCCM 2012 R2 to the environment.
What is the affect on our Windows 7 users when the SCCM 2012 R2 client is deployed - will their existing App-V apps (utilizing the App-V Full Infrastructure Model) continue to function? Or will SCCM 'take over' all App-V functionality?
The only documentation I can find on this is one paragraph in the App-V and ConfigMgr 2012 White Paper (http://download.microsoft.com/download/1/5/A/15AD0DD6-40A8-49E3-86D6-C21E5D0BC7F8/App-V%20and%20ConfigMgr%202012%20White%20Paper.pdf) which
states:
Q: Is it possible to perform a phased migration from an App-V standalone or App-V Full Infrastructure
to Configuration Manager virtual application management?
A: Yes, migration to Configuration Manager virtual application management begins with deployment of
an App-V application from Configuration Manager 2012. Upon the first deployment in Configuration
Manager 2012, no new applications can be deployed via other methods, but all previously deployed
packages will be retained.
A blog post here (http://www.applepie.se/config-mgr-2012-and-app-v) seems to indicate this is expected behavior.
But then, this contradicts what Microsoft says on the TechNet website (http://technet.microsoft.com/en-us/library/jj822982.aspx):
Configuration Manager begins to manage virtual applications on a client after the first deployment of a virtual application. After this, all App-V applications on the computer must be managed by Configuration Manager.
Does anyone have any opinions or experience on this? Or further information?
My Microsoft Core Infrastructure & Systems Management blog -
blog.danovich.com.auAs soon as an App-V package is deployed to a user/device via SCCM then it takes over the management of the client on that device, therefore App-V packages coming from the App-V publishing server will no longer be deployed to that device.
I would assume that full cached apps would continue to be run on the local device but new content would no longer be deployed from it.
Cheers
Paul | sccmentor.wordpress.com -
SCCM 2012 - Custom Hardware Inventory Report
Hi All
I am looking for a step-by-step on how to build a custom hardware inventory report in SCCM 2012 that is similar to the default Hardware-09A report but with a few added fields.
The fields I am looking to add are
Current logged on user
Monitor make
Monitor Model
Monitor Serial
Also, if I right click and select Edit, the report view does not open to view the SQL statements.
Any assistance is appreciated
Thanksand is there a solution for the other points I made?
Monitor make
Monitor Model
Monitor Serial -
SCCM 2012 Admin Console deployed using APP-V v4.5.3 crashes
Good afternoon,
I am trying to deploy the 2012 SCCM Admin Console to users via APP-V v4.5.3.
I built a clean Server 2008 R2 Standard server, ran the APP-V sequencer and created the package. Then copied the package to our APP-V server and ran the Application Virtualization Management Console to Import the Application.
Having completed the work above the SCCM Admin Console icon appears on the relevant users desktop and opens / connects to the SCCM site server successfully.
Problems arise when you begin to navigate around the SCCM Admin Console. As soon as you select anything the console crashes with the error: Microsoft.ConfigurationManagement.exe has stopped working - Close the program
Any ideas please ?
AndrewAs far as I'm aware sequencing the ConfigMgr console is not supported. However there are blog posts on how to do this.
http://blogs.technet.com/b/appv/archive/2013/01/08/how-to-sequence-the-microsoft-system-center-2012-configuration-manager-admin-console-with-microsoft-app-v.aspx
http://blogs.technet.com/b/configmgr_geek_speak/archive/2013/05/29/sequencing-the-system-center-configuration-manager-2012-administrator-console-with-app-v-5-0.aspx
The App-V versions in these posts are V4.6 SP1 and V5. I see that you are using V4.5.3. Perhaps this is the problem.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
SCCM 2012 Console - slow performance when browsing in Applications Deployments
Hi There,
we are experiencing a slow Console (SCCM 2012 R2 CU1, one Primary) if we go to Software Library > Applications and than clicking on Deployments. It takes up to 2 Minutes if we get results of the Deployments which depend to the Application. It Doesn´t
matter if there are 0 or 20 Deployments.
It only occurs if the SCCM Admins do not have full Admin rights in SCCM.
The reason must be the Security Scopes, because all Admins have full rights to be a "Application Deployment Manager".
Can somebody help me to get rid of this Problem?
Regards
FlorianHello Joyce,
thanks for the tip! I can see this Query in SMSProv.Log, if i click on the Register Deployment at the Application. Here it takes about two minutes:
Execute SQL =select all SMS_DeploymentSummary.AssignmentID,SMS_DeploymentSummary.CI_ID,SMS_DeploymentSummary.CollectionID,SMS_DeploymentSummary.CollectionName,SMS_DeploymentSummary.CreationTime,SMS_DeploymentSummary.DeploymentID,SMS_DeploymentSummary.DeploymentIntent,SMS_DeploymentSummary.DeploymentTime,SMS_DeploymentSummary.DesiredConfigType,SMS_DeploymentSummary.EnforcementDeadline,SMS_DeploymentSummary.FeatureType,SMS_DeploymentSummary.ModelName,SMS_DeploymentSummary.ModificationTime,SMS_DeploymentSummary.NumberErrors,SMS_DeploymentSummary.NumberInProgress,SMS_DeploymentSummary.NumberOther,SMS_DeploymentSummary.NumberSuccess,SMS_DeploymentSummary.NumberTargeted,SMS_DeploymentSummary.NumberUnknown,SMS_DeploymentSummary.ObjectTypeID,SMS_DeploymentSummary.PackageID,SMS_DeploymentSummary.PolicyModelID,SMS_DeploymentSummary.ProgramName,SMS_DeploymentSummary.SoftwareName,SMS_DeploymentSummary.SummarizationTime,SMS_DeploymentSummary.SummaryType
from fn_DeploymentSummary(1031) AS SMS_DeploymentSummary where (((SMS_DeploymentSummary.DeploymentID in (select all SUIP0.ObjectKey from RBAC_InstancePermissions AS SUIP0 where (SUIP0.AdminID in (16777219,16777243,0) AND ((GrantedOperations&1)
= 1 AND SUIP0.ObjectTypeID in (200)))) AND SMS_DeploymentSummary.ObjectTypeID in (200)) OR (SMS_DeploymentSummary.DeploymentID in (select all SUIP0.ObjectKey from RBAC_InstancePermissions AS SUIP0 where (SUIP0.AdminID in (16777219,16777243,0) AND
((GrantedOperations&1) = 1 AND SUIP0.ObjectTypeID in (201)))) AND SMS_DeploymentSummary.ObjectTypeID in (201))) AND SMS_DeploymentSummary.ModelName = N'ScopeId_74CC6EA1-E5C5-4424-B8EF-DDE952A3FC7A/Application_5661d887-1908-4565-8da0-097430692825') order
by SMS_DeploymentSummary.DeploymentTime SMS Provider 25.11.2014 08:19:43 7244 (0x1C4C)
Those Entries will be generated SMSAdminUI.Log
[7, PID:6880][11/25/2014 08:19:43] :The performance counter '# WQL queries active' was not found
[7, PID:6880][11/25/2014 08:19:43] :The performance counter '# WQL queries active' was not found
Regards
Florian -
SCCM 2012 Software Center remembered user apps
Hi
Most of our packages are advertised to all users, only a few are advertised to machines. When a new user 'A' opens the Software Center only the packages advertised to the machine appear in the list with a status of available.
When I login as a User 'B' that has previously installed packages they appear as installed in the Software Center list, as expected.
When I re image the machine and reset the user B's profile and login as User B the applications appear in Software Center as available.
User Affinity is turned off, How can I ensure these Applications don't re appear in Software Center?
Thanks
IanI don't understand the behaviour you are referring to.
AVAILABLE deployments to USERS can be seen in the application catalog. All other deployments will be shown in Software Center. That includes REQUIRED delpoyments to users, AVAILABLE & REQUIRED to devices.
As far as I'm aware there are no exceptions
http://blogs.technet.com/b/configmgrteam/archive/2012/03/31/introducing-the-application-catalog-and-software-center-in-system-center-2012-configuration-manager.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
SCCM 2012: report for inventory of different hardware types?
Hi,
Is there a default report which shows how much of each model (vendor, type, f.e. 24 Dell Lenovo, 80 Dell ...) we have in our company?
J.
Jan HoedtHi Jan
I have used this SQL Query when I am doing projects to get an overview of models by manufactor.
select
GSCS.Manufacturer0 as [Manufacturer],
GSCS.Model0 as [Model],
count(*) as [Count]
from v_R_System RS
left join v_GS_COMPUTER_SYSTEM GSCS on RS.ResourceID = GSCS.ResourceID
Group by GSCS.Model0, GSCS.Manufacturer0
Order by GSCS.Model0
It is not a report in itself, but If you create a new empty report in ConfigMgr 2012 and open it with Report builder, you can use this query to built a very basic "Count Hardware Models by Manufactor".
But I think it will give you the information you are looking for. -
SCCM 2012 Binary Replication - 4GB size limit on Applications?
Hi there,
We have been struggling with updating our Autodesk applications, all of which are 8-12 GB in size. Anytime we update the sources files, SCCM appears to do a FULL update of all source files across our WAN links, instead of a delta replication. I understand
binary replication is enabled by default for Applications, but I was told by a 3rd party vendor that binary replication only works on Applications up to 4GB in size. Anything larger, and it is a full source file update everytime. I have not come across this
in any documentation, and would like to know if this is indeed true.
Thanks for your feedback on this,
RichI was able to add a hotfix to our Autodesk C3D 2015 package, and update content this weekend. Binary replication did work as we would expect it to. It created a content TAR file of ~100MB, located in SMSPKGSIG folder, as well as a Content folder in
SCCMContentLib\DataLib of the same size, and only sent that amount of data out to all our sites. I verified it reviewing
It still took over 48 hours for all 60 sites in our environment, and would like to know if that is because the size of the Application is so big (11Gb with 25K files included), that it just takes a long time for SCCM to compare the changes made with the
rest of the Application before updating itself properly? Does that make sense?
Thanks, Rich -
Asset Intelligence Third Party Import File with multiple PO# for Same Software Title.
A customer of mine ask me if there is a way to import third-party license information to SCCM 2012 Asset Intelligence that contain multiple POs either from same or different vendors using one line per PO. I try using the following test input file but
if fails. If I only use a single line it works.
Name,Publisher,Version,Language,EffectiveQuantity,PONumber,ResellerName,DateOfPurchase,SupportPurchased,SupportExpirationDate,Comments
Adobe Reader XI (11.0.07) MUI,Adobe Systems,11,English,3,CS10087281,XYZ,2/1/2013,,,
Adobe Reader XI (11.0.07) MUI,Adobe Systems,11,English,7,CS10087293,XYZ,6/1/2014,,,
Adobe Reader XI (11.0.07) MUI,Adobe Systems,11,English,2,CS10087451,RTR,7/1/2014,,
The customer wants to track each individual PO for auditing purposes. It appears the error in importing the file is due to the Name field having to be unique. One approach might be to manually totaling the licenses for a given title and adding
the POs info to the comment field. Issue with this is the administrative overhead and limiting ability to track the individual PO/license info such as Reseller Name, Date of Order, ect. I'm hoping for a workaround or is this a software limitation
and they have to look at a third party solution.
Thank You in AdvanceWally,
Thanks for the response. So far it appears to be the case because the key field is the software name so it looks like a third party tool might be needed where SCCM provides the license usage info and the tool reconciles/normalizes against purchases. -
App-v OSD's not getting imported to SCCM 2012
Hi
Currently i am migrating APP-V 4.6 PACKAGES to SCCM 2012, as part of this process few OSD's of applications are not getting imported.
ex:- if application has 10 OSD then only 5 OSD are getting imported.
Since App-v 4.6 was earlier standalone all the OSD were published to different user using different AD groups,
Do the package has to be edited again to import all OSD or manifest files has to be changed to include all OSD to get imported to SCCM 2012.
ThanksOpen up the app in the sequencer, add the file to your scripts folder. If the script requires to be run elevated, you'll want to use the Deployment config file and use Global publishing....
If you don't need elevation you can use the User Config and won't need to publish globally.
Fore more info and some examples, check this out:
http://blogs.technet.com/b/appv/archive/2012/12/10/scripting-and-embedded-scripting-for-appv-5-0-dynamic-deployment-and-user-configuration-scripting.aspx
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon -
How to resolve BADMIFS file in SCCM 2012
Hi,
I am trying to resolve Hardware inventory issue on the machines which is not reported more than 10 days in SCCM 2012.
I found there are BADMIFS files created in the below location.
How to resolve the issue on the machines which is under below each BADMIFS folders. Do we have any troubleshooting steps for each folder?For troubleshooting hardware inventory import, you can check below link
https://sccmfaq.wordpress.com/2013/10/16/sccm-2012-troubleshot-hardware-inventory-import/
For Resolve-cleanup BadMIFs, you check below script
https://gallery.technet.microsoft.com/scriptcenter/SCCM-2012-bad-hardware-0bec0ee0
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali
Maybe you are looking for
-
Whenever I am using Firefox, when I am on a webpage (any webpage) & I either click on a link in that page, start typing in a box, click on a button, or click on a tab, the browser window either reduces to the toolbar, or just changes size, usually fr
-
Authentication issue with Xcelsius/Portal integration
I am facing an issue with the way we have integrated our Xcelsius dashboard with our corporate portal. I know this probably is more of a SDK question than Administration, but I figured I will ask it here anyway since Tim and some others are diverse e
-
With multiple Office 2013 items opened, Word opens an invisible document
Using Windows 7 64-bit, 4GB RAM, and Office Plus 2013, fully updated as of 03/31/2015: User has multiple Excel windows open, multiple Outlook windows open and multiple Word windows open (4 word docs/windows) - When the user opens a 5th Word document,
-
What are the fields in BDC table
hi what are the fields in BDC table. what is the last entry
-
Installed new itunes..
but now my ipod touch is not working!! when i plug it in, itunes tells me it need to be restored before i can use itunes, so i click restore and wait, then it decides to tell me it cant be done :/ anyone know how i can resolve this?