SCCM 2012 cannot access distribution point as a data source for OS image

I am trying to path a data source to one of our file servers and get the following error:
I am guessing this is a permissions issue. The path is correct. This is also a distribution point and I have no trouble distributing content to it. The SCCM server is set to have local admin and network share rights to this file server. Any
ideas?

Of course - that would be too easy... had to ask though :)
Hmm, sounds odd. I'm guessing that since you're using it as a DP you're on Windows Server... You might try browsing there in your runline but instead of doing
\\server\share\OS.WIM try doing
\\Server.FQDN\Share\OS.WIM
I've seen some odd issues where I need to specify FQDN but it's pretty rare. I do remember an issue where my own account would not go through even though it had rights and I could navigate. I used a different account and I think after a while
it cleared up. My guess is something got rebooted and it "righted the ship" so-to-speak. I'm sorry I don't remember more, that particular client had multiple accounts so I just switched to a different one and by the time I had to do the same function
again the issues had resolved itself so I just moved on.

Similar Messages

SCCM 2012 R2 & Pull Distribution Point Casuing 0 Byte amd64 folders

Experiencing an extremely frustrating problem.
ENVIRONMENT:
1 Primary Site Server / DP (Main Office)
40 DP's (Remote School Locations)
- Hosted on a file server VM
- Contains 3 partitions: C: (System), E: (Data), I: (PKG share)
OS: Server 2008 R2 (Primary Site Server and File Servers / DP's)
SCCM Version: SCCM 2012 R2
We recently upgrade to SCCM 2012 R2. I have confirmed that this has not caused the problem I am about to describe. The only other change that has occurred recently is that we configured all of our DP's at each of our 40 sites to be pull distribution points.
While this seems to be working fine we are now seeing a whole bunch of 0 Byte alpha numeric folders with a 0 Byte amd64 subfolder. These folders seem to attach to the E: drive on all of our File server distribution points....for the life of me I cannot figure
out why and this occurred as soon as we switched to pull distribution points. While this does not seem to be having an erroneous effect on our environment, it is annoying and somewhat disconcerting as I have not been able to ascertain what is causing it. Any
SCCM admins out their ever encountered this?
Thanks

Yes, I have examined the logs using cmtrace and done a search for the amd64 string to see if any of the logs indicate its creation as part of the pull dp process. I have not found anything as of yet.
Thanks

SCCM 2012: Reinstall remote distribution point?

Hi,
We have a remote distribution point to which we can't deploy packages anymore. Several attempts to repair it failed.
I'd like to remove the distribution point and reinstall it via SCCM 2012 console.
However, I'd like to know the impact since it contains GB of packages already.
Note: the DP has been removed for clients (temorarely) so no impatc there.
My questions:
-what is best practises: can I just remove and add it in 1 go (or need to wait before re-adding, reboot needed in between)?
-will all data be pulled in again (I activated pull and would reactivate it after reinstall)?
-what's your experience in this procedure? does it work in general or is it preferrable I continue troubleshooting the current situation?
Please advise.
J.
Jan Hoedt

I can see there was installed a new dotnet version C:\Windows\Microsoft.NET\Framework64\v4.0.30319
recently.
Can/should I register this to IIS?
http://stackoverflow.com/questions/22952115/asp-net-iis-7-5-http-500-21-error
C:\Windows\Microsoft.NET\Framework\v4.0.30319>aspnet_regiis.exe -i
Jan Hoedt

Are SSAS 2012 BI Tabular Semantic Models supported as data source for Cognos 10?

Hello,
As the title states, I need to have an official answer and if possible a URL stating the same. We're implementing a Tabular Semantic Model with SQL Server 2012 SP1 and SharePoint 2013 SP1 and since Power View doesn't support iOS (primarily managers
consuming reports & dashboards with their iPads) at least not on-premises just yet, I understand that's fully supported in Office 365 with Power BI, unless this has changed lately, we're forced to find out alternative solutions and since
our customer has Cognos 10 already deployed, it's critical to know whether it provides some level of support or if there's any workaround to support iOS with the current deployment perhaps?
Thanks in advance for the help.
PS: I'm posting this question on Cognos' forums as well.
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSE

Thanks Simon,
Unfortunately having access to SSRS alone isn't good enough, our customer absolutely loves Power View but the fact that isn't supported for iOS is a huge drawback. I've seen this requirement in Microsoft Connect several times drawing a lot of attention,
and now it appears closed, any chance you know what's the current status?
https://connect.microsoft.com/SQLServer/feedback/details/738938/power-view-without-silverlight
Furthermore, there's this article as well that points out Power View in HTML5, just wondering whether it might be available for on-premises, perhaps through an update any time soon? Please this is critical.
https://support.office.microsoft.com/en-gb/article/Power-View-in-HTML5-c71dc902-2a2c-482e-b5a5-e9c884650a26?CorrelationId=c6913a00-3470-4eee-bc9d-a5b094e8afcf&ui=en-US&rs=en-GB&ad=GB
Thanks again, looking forward to hearing from you soon,
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSE

Using MS Access as a Data Source for BW

I have used MS Excel spreadsheets and 'mainframe' databases as data sources for BW in the past.
The company I ma working with has a large MS Access database containing historical sales data (from an R/3 3.1H system) that they wish to upload into BW v3.5 for comparison purposes.
My undersatnding was that MS Access was not a valid data source for BW. Could someone point out the error of my thinking and suggest how to set up MS Access as a data source.
Thanks in anticipation

Hi Austen,
Welcome onboard!
True, as far as I know, MS Access is not supported by BW. But you can use MSSQL instead. MSSQL is supported. I think the free version of MSSQL called MSDE (Microsoft SQL Desktop Edition) is also supported (Although I have not tried it yet)
Importing MSACCESS data to a similar table in MSSQL is very easy. Just use the Data Transfer Utility bundled with MSSQL. It will bulk insert data from MSACCESS to MSSQL. Then from MSSQL, you can set up BW to connect to it and you are done...
Hope I have helped. if I did, please grant points...
Regards,
Jkyle

HT4061 I cannot access my I Pad it is asking for a passcode, I did not set one, so a code has been created and i need to have it reset

I cannot access my Ipad. It is asking for a passcode, I did not set one. How do I reset this so that I can log onto my Ipad?

Hey dmplinton518,
You'll want to follow the directions in here:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Sincerely,
Delgadoh

CAS and three primary hierarchy SCCM 2012 r2 can i get any runbook from microsoft for Step by step installation

Hi All
need CAS and three primary hierarchy SCCM 2012 r2 can i get any runbook from microsoft for Step by step installation
need step by step installation guide with screenshots.

There's a lots of installation guide but each guide is for a "standard" installation, your environment is unique and you should get help to be sure to implement SCCM to fulfill your needs.
Installing SCCM without any experience will be tricky and maintain it will be even harder. This is not a simple product.
http://sccmentor.wordpress.com/2014/01/08/sccm-2012-r2-step-by-step-installation-guide/
http://www.windows-noob.com/forums/index.php?/topic/4045-system-center-2012-configuration-manager-step-by-step-guides/
Benoit Lecours | Blog: System Center Dudes

Access enforcer and User Data Source for HR

We are on Access Enforcer 5.2 - service pack 2:
My problem is that when creating a new request in AE, I able to get a list of all users when I point my User Data Source to either SAP or UME. However when I attempt to create a request whilst pointing the User Data Source at the SAPHR system, I do not get any users back (and we have user set up in the SAP HR system).
Ive changed the connector to YES under the HR System box, Ive changed the Data Source Type and Details Source Type to point at the SAPHR and still it fails to fetch any users.
I've tried looking at the log, but can't get much out of it.
I would appreciate it, if anyone could provide any assistance.
Thanks you in advance.
Amarjit
Message was edited by:
amarjit singh

Hi Micheal,
Thanks for your reply.
I'm pointing both Data Source Type and Details Source Type to the same system SAPHR and to the same system name (which is our dev system)
Regards,
Amarjit

You do not have permissions to access a database that contains data required for this form to function correctly.

I have dropdown on infopath form , and it receives data from sql server table , it works fine when i am running in preview mode , but when i am publishing form to sharepoint server and loading that form
i am getting this
You do not have permissions to access a database that contains data required for this form to function correctly.
Can you please help?
Thanks,

try this one, if not yet
Convert the data connection to UDC (store it in a Data Connection Library within the same site collection as the form library). See if this works without any other changes, but if not, then...
Manually edit your UDC file in Notepad (or your preferred editor) so that the authentication line is not commented out and so that it references the name of the SSO target app you created.
For Type, use NTLM.
Ensure the user has rights to access the database
Also ensure the connection file has been approved - A sharepoint admin can access a non approved Ucdx file. Go to the connection library and approve the file
Also check this post having the similar issue:
http://social.technet.microsoft.com/Forums/en-US/3196bafd-4bc3-40ab-ac2b-d149d1c3e0fa/sharepoint-2010-error-you-do-not-have-permissions-to-access-a-database?forum=sharepointdevelopmentprevious
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

SCCM 2012 R2 - Reporting Services Point installation - "The Datasource does not exist"

Hi all,
Quick bit of background, we have SCCM 2012 R2 installed on a Windows 2012 R2 server. We have the SQL back end off box, configured on a SQL 2012 R2 server running on a Windows Server 2012 R2 cluster. Then there is yet another server which runs the reporting
services. I've just tried installing the Reporting Services Point on the srs server but it doesn't appear to have worked that well. Here's the info i've got back:
A] Site Status > Reporting services point:
SMS_SITE_SYSTEM_STATUS_SUMMERIZER
Site System Status Summarizer detected that the availability of the "Reporting services point" role on server "\\NA-SQLR01.in.tna.local" has changed to Failed.
B] The last message from the SMS_SRS_REPORTING_POINT Component Status is "Site Component Manager successfully installed this component on this site system"
C] Here's the first chunk of info which appears in the srsrp.log file:
SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT as thread ID 4204 (0x106C).
This is a SRS Reporting Point Role as SRSRP registry key exists.
Waiting for changes for 0 minutes
Timed Out...
Set configuration
Check state
Check server health.
Successfully created srsserver SMS_
Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
Reporting Services is running
The DataSource does not exist.
[sqlserver.local\SQL1] [SCCM_XXX] [ConfigMgr_XXX] [sqlreportserver.LOCAL]
[SQL2012] [1] [] [xxx\SCCM2012Server]
Confirmed version [11.0.5058.0] for the Sql Srs Instance.
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
Extract resource language packs if exists
Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
Looking for 'English (United Kingdom)' resources
Looking for 'English' resources
Found resources for 'English'
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
Item, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
Folder, String Parent, Property[] Properties)
(!) SRS root folder was reported missing
STATMSG: ID=7405 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SRS_REPORTING_POINT" SYS=sqlreportserver.LOCAL SITE=P01 PID=2120 TID=4204 GMTDATE=Wed Apr 08 08:56:05.349 2015 ISTR0="ConfigMgr_XXX" ISTR1="sqlreportserver.LOCAL"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
Registry change
Waiting for changes for 1 minutes
After this point i simply get the following info messages looping endlessly:
Set configuration
Check state
Check server health.
Successfully created srsserver
Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
Reporting Services is running
The DataSource does not exist.
[sqlreportserverlocal\SQL1] [SCCM_XXX] [ConfigMgr_P01] [sqlreportserver.LOCAL]
[SQL2012] [1] [] [XX\SCCM2012Server]
[1] [0]
Confirmed version [11.0.5058.0] for the Sql Srs Instance.
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
Extract resource language packs if exists
Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
Looking for 'English (United Kingdom)' resources
Looking for 'English' resources
Found resources for 'English'
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_P01' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
Item, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
Folder, String Parent, Property[] Properties)
(!) SRS root folder was reported missing
Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
Registry change
Waiting for changes for 1 minutes
Has anyone come across this issue before? Must admit, I'm not too hot on the sql side of things so any advice or suggestions would be greatly appreciated. Thanks in advance!

Hi guys, cheers for the swift response.
Garth, i can access SSRS in IE from the SCCM box and it looks a-ok.
Paul, nope can't say I've done any configuration of reporting services - the whole thing has been set up by the database team. Having had a trundle through Reporting Services Configuration Manager, it seems the Database team have set up SSRS in line with
the walkthrough you posted.
Since i'm not seeing the ConfigMgr_XXX folder appear in SSRS I'm wondering if there's something preventing SCCM from being able to create it. The message
"Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions
granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation" sounds like the account SCCM is leveraging to perform the install might not have the right permissions in SSRS. Do i need to delegate specific rights to the NT
AUTHORITY\SYSTEM account in SRS perhaps?

SCCM 2012 R2 - Multiple Management Points

Hi,
We are deploying SCCM 2012 R2 and it will cover 15 geographical locations. There will be 1 site and 1 site server with DB. The 15 locations will each have a Distribution Point . The number of hosts is around 10,000 total.
Can multiple (15) Management Points be installed along with the Distribution Points to communicate back to 1 site server? Is it necessary or even possible?
Thanks.

It's possible yes (with many caveats), but not generally necessary. If you are concerned about client to MP traffic, which is generally quite small (which I why I say it's generally not necessary), then the use of secondary sites is recommended instead of
stand-alone DPs. The secondary site will then provide a local DP, MP, and SUP for clients at that location to use.
Directly placing an MP that is part of the primary site is problematic because clients do not choose MPs within a single primary site based upon their location. Thus, placing an MP remotely does not address geographically dispersed locations/clients in any
way and may make the problem worse. As of 2012 R2 CU3, you can hard-code MPs into clients, but this creates a bit of an overhead problem and does not address SUPs.
Thus, as mentioned, if you are truly concerned with this traffic, secondary sites are the way to go. Without knowing how many clients are at each location and the bandwidth available to those locations, I wouldn't make a recommendation as to which to use
though. In general, I always lean towards stand-alone DPs for remote locations unless the bandwidth is severely constrained or there are a large number of clients at that location.
Jason | http://blog.configmgrftw.com | @jasonsandys

2012 -- 2012 Migration: How to Reassign Distribution Points that Reside on Source Secondary Site Servers to the Target Site

Source hierarchy AAA is at 2012 R2 CU3 and contains a primary site and 14 secondary sites (A01 through A14). The 14 secondary site servers hold the following roles:
Site system
Management Point
State migration point
Site server
Site database server
Component server
Distribution Point
Target hierarchy BBB is also at 2012 R2 CU3 and contains only a primary site. The goal is to "downgrade" the severs at source secondary sites A01 through A14 to distribution points.
AAA was added as a source site. Data gathering was done. A migration job was created an run, and distribution points from the source hierarchy were shared to allow a phased migration of the clients.
We have reach the point where we are ready to reassign distribution points in sites A01 through A14 from AAA to BBB, but none of the shared distribution points are eligible for reassignment. We surmise that since the DP role is not the only role on
these servers (as you can see from the bullet list above), they are ineligible for reassignment. We are unable to remove most of the roles. In fact, the only 2 roles that can be removed are the DP role itself, and the State Migration
Point. If we delete the secondary site, it removes ALL roles...not leaving any behind...including the one we need...DP.
My question is 2-part:
Is our assumption correct? Must a DP role be the only one on the server for a DP to be eligible for reassignment?
Is there any way we can reassign these DPs instead of deleting everything and building them from scratch?
These secondary site servers are in branch offices and host a lot of distributed packages. It would be very inconvenient to have to rebuild the DPs from scratch and redistribute all those packages over the WAN.

Full Disclosure: I have never used this tool myself. I intend to, however the opportunity or time to do so has not yet arisen.
You could use the techniques outlined in CloneDP (https://gallery.technet.microsoft.com/scriptcenter/CloneDP-for-SCCM-2012-SP1-825ce5b1) to create prestage media on each DP and rebuild. That at least would prevent redistributing over the WAN
Ken provides a nice writeup too: http://blogs.technet.com/b/kensmith/archive/2013/08/01/migrating-the-content-library-between-distribution-points-in-sccm-2012-sp1.aspx

SCCM 2012 R2 SRS Repointing Point Error 7403

I have install the Reporting services point and I'm receiving error 7403 "The report server service is not running on Reporting Service Point server "SFSCCM1W.SFCCMO.EDU"; start the service to enable reporting."
Server 1: SCCM 2012 R2
Server 2: SQL 2008 R2 CU4

I install the SSRS on the Server running SCCM 2012. So I need to install the SSRS role on the SQL server?
When I browse to the sccm server there are no reports in the browser.
Okay I found the reports on the sql server when I browse to it http://serversql/reports.

Sccm 2012- remote access to client

Hi
We have SCCM 2012 and enabled the remote tools to the workstation
I noticed when I used a ccount with local admin I able to access the machine properly
But when I used account "without" local admin account in the computer I'm getting "prompt" to enter user name and password and even I input the account I;m getting still prompt option.
Please advise why the NON/Without "local admin" can't access the machine and pompting a user name and password
The remot tools required local admin ???
although the user have local admin can do ..
Robert

When I add the "remote control or remote viewer in local administrator of the machine, the thing work smoothly
The only issues are , when the remote viewer is NOT part of local administrator I can't able to remote the machine
addiotinal info for port listening for further troubleshooting
need your help .. is there any relation for the gpo ? because if local admin it work fine
Active Connections
Proto Local Address Foreign Address State
TCP 0.0.0.0:135 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:445 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:2701 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:49152 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:49153 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:49154 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:49182 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:49183 SCCMTEST05:0 LISTENING
TCP 0.0.0.0:49184 SCCMTEST05:0 LISTENING
TCP 192.168.24.218:139 SCCMTEST05:0 LISTENING
TCP 192.168.24.218:2701 server6032:60104 TIME_WAIT
TCP 192.168.24.218:57163 server5092:10123 ESTABLISHED
TCP 192.168.24.218:57265 server06:microsoft-ds ESTABLISHED
TCP 127.0.0.1:57280 SCCMTEST05:0 LISTENING
TCP [::]:135 SCCMTEST05:0 LISTENING
TCP [::]:445 SCCMTEST05:0 LISTENING
TCP [::]:2701 SCCMTEST05:0 LISTENING
TCP [::]:49152 SCCMTEST05:0 LISTENING
TCP [::]:49153 SCCMTEST05:0 LISTENING
TCP [::]:49154 SCCMTEST05:0 LISTENING
TCP [::]:49182 SCCMTEST05:0 LISTENING
TCP [::]:49183 SCCMTEST05:0 LISTENING
TCP [::]:49184 SCCMTEST05:0 LISTENING
UDP 0.0.0.0:123 *:*
UDP 0.0.0.0:500 *:*
UDP 0.0.0.0:4500 *:*
UDP 0.0.0.0:5355 *:*
UDP 192.168.24.218:137 *:*
UDP 192.168.24.218:138 *:*
UDP 192.168.24.218:1900 *:*
UDP 192.168.24.218:54661 *:*
UDP 127.0.0.1:1900 *:*
UDP 127.0.0.1:52574 *:*
UDP 127.0.0.1:54575 *:*
UDP 127.0.0.1:54662 *:*
UDP 127.0.0.1:56463 *:*
UDP 127.0.0.1:59546 *:*
UDP 127.0.0.1:59642 *:*
UDP 127.0.0.1:63001 *:*
UDP 127.0.0.1:63986 *:*
UDP [::]:123 *:*
UDP [::]:500 *:*
UDP [::]:4500 *:*
UDP [::]:5355 *:*
UDP [::1]:1900 *:*
UDP [::1]:54660 *:*
UDP [fe80::9ddb:5483:f053:126e%11]:1900 *:*
UDP [fe80::9ddb:5483:f053:126e%11]:54659 *:*
Robert

SCCM 2012 Application Catalog Website Point role Status is critical

Hi team,
In a client's SCCM 2012 R2 environment there is a Critical Icon and Status against one of two Application Catalog Website point roles. Looking at the Component status, there are no errors and all the components show as green.
Trying to find any warnings or errors in the messages for the Site System role doesnt show any errors, and I tried to reset counts but this has not changed the status.
I am not sure where to go from here. The application catalog itself works and is up. All the services are running. I am unsure as to where this error status comes from or what it pertains to.
Any advice would be appreciated.

Hi,
Please check portlctl.log and awebsctl.log to see if there is any error.
You could also check the thread below.
Symptom: Reporting Services Point Status (under Monitoring - System Status - Site Status) appears as Critical, No error messages in logs or status messages
Cause: 'Status' can be set to "2" for 'SMS SRS Reporting Point' in dbo.summarizer_sitesystem table in sql
Resolution: > Run below query:
update dbo.summarizer_sitesystem set status = '0' where SiteSystem = '["Display=\\abc.local\"]MSWNET:["SMS_SITE=ABC"]\\abc.local\' and role = 'SMS SRS Reporting Point'
> It should set the status back to 0.
> Check in console and errors should go away.
> In case if value reverts back then check below namespace in wmi of site server:
root\sms\site_pri\sms_sitesystemsummarizer
> check the value for reporting services point, ideally it should be 0, let's say it's set to 2 there as well then remove role of reporting services point.
> if entry for reporting services point goes away from both the places then it's good, you can re-install the reporting services point and it should work fine.
> Let's say if value/values doesn't get removed from sql/wmi , remove them manually via queries and then go with uninstall and re-install.
> then it should work and errors in console and common.log should go away.
https://social.technet.microsoft.com/Forums/en-US/5e0b7af6-f00c-4610-a709-f3e0e26505be/sccm-2012-monitoring-site-status-reporting-services-point-status-critical?forum=configmanagergeneral
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCCM 2012 cannot access distribution point as a data source for OS image

Similar Messages

Maybe you are looking for