SCCM 2012 Client Communication Issue with SCCM 2007

My Clients was installed SCCM 2007 client version but somehow those clients reporting to SCCM 2012 Server
Note : My SCCM 2007 Server still active mode . and the SCCM 2007 client IP boundaries was not added into SCCM 2012 server
But still communicating to SCCM 2012 , what is the root cause ?
Best Regard's Krishna

Either, during the client installation the client was manually assigned to the ConfigMgr 2012 site (by specifying the site code), or during the client installation the client was auto assigned to the ConfigMgr 2012 site (that can only happen when there
is an overlap in the boundaries and that doesn't have to be the same type of boundary).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

SCCM 2012 Client Communication

Hellooo,
Migrated my clients to SCCM 2012 but still reporting to SCCM 2007 Server only .
Why so ?
Note : MY SCCM 2007 Server still active mode only . Am sure
Best Regard's Krishna

A ConfigMgr 2012 client can't communicate with a ConfigMgr 2007 site. The client will show active for a couple of day's, but you should already notice that the last communications were not very recent (see the times of the latest policy refreshes and the
latest heartbeats).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012 Client was removed but SCCM console still showing the status as "Yes"

Hi,
In a VM, SCCM 2012 client agent was removed and the VM was reverted back to a clean machine. SCCM console still shows the status as "Yes" even after the client agent was removed. Heartbeat Discovery is set to run every 1 hour.
Please guide on this.
Regards, Lorin Davis

It's kind like a person dying (sorry to be a bit morbid) -- how does the phone company know the person died? The dead person certainly can't tell them and the phone company doesn't query every person it services and ask them "are you alive?"
Thus, someone else must notify them of the person's passing. This is no different than a client agent "dying" in ConfigMgr. A ConfigMgr site never initiates communication with clients and thus something else needs to tell the site that the client
agent is dead. You! Or, an automated process (as Torsten mentioned) that goes through automatically marks a client as "dead" that hasn't been heard from in x number of days.
Jason | http://blog.configmgrftw.com | @jasonsandys

SCCM 2012 R2 ADR issue with proxy authentication

Hi,
We're migrating SCCM 2007 to SCCM 2012 R2.
In SCCM 2007, the proxy server is configured with user authentication, and this works.
In SCCM 2012 R2, the Software Update Point is installed locally and connected with a local WSUS 4.0 (Server 2012)
We use a proxy with user authentication for Update Deployment. (This user is the same as configured in SCCM 2007.)
The Proxy Server is Blue Coat SG.
The proxy account is used for:
The Synchronization works, but Automatic Deployment Rule (ADR) doesn't work.
When an Automatic Deployment Rule is started, it tries to authenticate 3 times.
The Patchdownloader.log shows:
Trying to connect to the root\SMS namespace on the <servername> machine.        Software Updates Patch Downloader        11/8/2013
12:19:06        3608 (0x0E18)
Connected to
\\<servername>\root\SMS        Software Updates Patch Downloader        11/8/2013 12:19:06        3608
(0x0E18)
Trying to connect to the
\\<servername.domain>\root\sms\site_ECM namespace on the <servername.domain> machine.        Software Updates Patch Downloader        11/8/2013
12:19:06        3608 (0x0E18)
Connected to
\\<servername.domain>\root\sms\site_ECM        Software Updates Patch Downloader        11/8/2013 12:19:06        3608
(0x0E18)
Download destination =
\\<servername.domain>\dp_wks_ms_updates$\3208bb5e-bcd9-4389-a0c9-02ef33ccb998.1\XPSEPSC-x86-en-US.exe .        Software Updates Patch Downloader        11/8/2013 12:19:07        3608
(0x0E18)
Contentsource =
http://wsus.ds.www.download.windowsupdate.com/msdownload/update/v3-19990518/cabpool/xpsepsc-x86-en-us_7ae70ca1330a099080c6c41c4d5b7f19b30dc0cd.exe .        Software Updates Patch Downloader        11/8/2013
12:19:07        3608 (0x0E18)
Downloading content for ContentID = 16819067,
FileName = XPSEPSC-x86-en-US.exe.        Software Updates Patch Downloader        11/8/2013 12:19:07        3608 (0x0E18)
Try username <domain\ProxyAccount>        Software Updates Patch Downloader        11/8/2013 12:19:07        8364
(0x20AC)
Proxy enabled proxy server <proxyserver>:8080        Software Updates Patch Downloader        11/8/2013
12:19:07        8364 (0x20AC)
HttpSendRequest failed HTTP_STATUS_PROXY_AUTH_REQ        Software Updates Patch Downloader        11/8/2013
12:19:07        8364 (0x20AC)
Download
http://wsus.ds.www.download.windowsupdate.com/msdownload/update/v3-19990518/cabpool/xpsepsc-x86-en-us_7ae70ca1330a099080c6c41c4d5b7f19b30dc0cd.exe to C:\Windows\TEMP\CAB6FD2.tmp returns 407        Software Updates
Patch Downloader        11/8/2013 12:19:07        8364 (0x20AC)
ERROR: DownloadContentFiles() failed with hr=0x80070197        Software Updates Patch Downloader        11/8/2013
12:19:07        3608 (0x0E18)
Then the proxy user account is locked:
Trying to connect to the root\SMS namespace on the <servername> machine.        Software Updates Patch Downloader        11/8/2013
12:20:11        3608 (0x0E18)
Connected to \\ <servername>\root\SMS        Software Updates Patch Downloader        11/8/2013
12:20:11        3608 (0x0E18)
Trying to connect to the
\\<servername.domain>\root\sms\site_ECM namespace on the <servername.domain> machine.        Software Updates Patch Downloader        11/8/2013
12:20:11        3608 (0x0E18)
Connected to
\\<servername.domain>\root\sms\site_ECM        Software Updates Patch Downloader        11/8/2013 12:20:11        3608
(0x0E18)
Download destination =
\\<servername.domain>\dp_wks_ms_updates$\e0a54221-3ff2-4129-b7cf-89bf5cd1f726.1\Windows-KB943729-x86-ENU.exe .        Software Updates Patch Downloader        11/8/2013
12:20:12        3608 (0x0E18)
Contentsource =
http://wsus.ds.download.windowsupdate.com/msdownload/update/software/updt/2009/10/windows-kb943729-x86-enu_e174c41ce3dcbd5c8922d6d1c39df1be425a70e0.exe .        Software Updates Patch Downloader        11/8/2013
12:20:12        3608 (0x0E18)
Downloading content for ContentID = 16824262,
FileName = Windows-KB943729-x86-ENU.exe.        Software Updates Patch Downloader        11/8/2013 12:20:12        3608 (0x0E18)
Try username <domain\ProxyAccount>        Software Updates Patch Downloader        11/8/2013 12:20:12        12480
(0x30C0)
Proxy enabled proxy server <proxyserver>:8080        Software Updates Patch Downloader        11/8/2013
12:20:12        12480 (0x30C0)
HttpSendRequest failed HTTP_STATUS_FORBIDDEN or HTTP_STATUS_DENIED        Software Updates Patch Downloader        11/8/2013
12:20:12        12480 (0x30C0)
Download
http://wsus.ds.download.windowsupdate.com/msdownload/update/software/updt/2009/10/windows-kb943729-x86-enu_e174c41ce3dcbd5c8922d6d1c39df1be425a70e0.exe to C:\Windows\TEMP\CAB6E4B.tmp returns 403        Software Updates
Patch Downloader        11/8/2013 12:20:12        12480 (0x30C0)
ERROR: DownloadContentFiles() failed with hr=0x80070193        Software Updates Patch Downloader        11/8/2013
12:20:12        3608 (0x0E18)
The RuleEngine.log shows:
Failed to download the update from internet. Error = 403 SMS_RULE_ENGINE 11/8/2013 16:18:25 3608 (0x0E18)
Failed to download ContentID 16824467 for UpdateID 16819978. Error code = 403 SMS_RULE_ENGINE 11/8/2013 16:18:25 3608 (0x0E18)
It seems that the ADR uses a wrong password when authenticating with the proxy, but this same user works when synchronizing with WSUS.
We performed the following actions with no result:
run the ADR manually and automatic,
reinstalled WSUS and SUP,
changed proxy user account.
Regards,
Matthias

Currently, the command shows:
Current WinHTTP proxy settings:
    Direct access (no proxy server).
We've been testing with:
upddwnldcfg.exe /s:<proxyserver>:<port> /u:<user> /allusers
psexec -i -s iexplore.exe, set Internet Explorer proxy manually
All with same result, proxy user getting locked when ADR runs.
(These settings have been removed after the test.)
I think dekac99 would suggest netsh winhttp set proxy or import proxy.
then turn off proxy use on the role SUP (this way not SCCM will send auth but all winhttp will use proxy)
the problems with that for me are:
- if MS implemented role-based proxy usage, why set at http layer - of course this might work as a workaround for the time being so it might be a good idea but I'm just not sure what unwanted issues it may cause
- the other thing is where I'm not sure, with set proxy you cannot define authentication account. if you use import from IE and the IE prompted for proxy auth, the stored credential will be used on winhttp layer (though I'm not 100% sure of that) - so this
is just too uncontrolled for me
- upddwnldcfg.exe will need to run in the name of system account (it stores credentials under HKCU so far I know it will be a per user based setting)
--> what confuses me, the catalog synch works which should use the same configured proxy and account(?), only ADR does not work. shouldn't they both use the same process for sending account auth info?

SCCM 2012 Client install issue

Hi ,
I am trying to install SCCM client on one server. But the installation is keep on failing. I am not able to start or stop WMI services.
Is there any solution for this issue. Please help.
Regards,
MTM

Hi,
It sounds like a reboot would be a good place to start, I have had similar issues with WMI, there are some hotfixes for WMI memory leaks and so more that perhaps could help as well if you can restart the service after a reboot.
http://blogs.technet.com/b/askperf/archive/2011/08/05/suggested-hotfixes-for-wmi-related-issue-on-windows-platforms.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

New SCCM 2012 client machines still getting SCCM 2012 SP1 client not the new SCCM 2012 SP1 CU3 client

Hi,
I've successfully (as far as I can tell) deployed SCCM 2012 SP1 CU3 and all my existing clients are showing a client version of 5.00.7804.1400. But when I setup a new client system recently I noticed that the client version was showing 5.00.7804.1000,
and not 5.00.7804.1400.
For new client systems, do I need to redeploy the packages that were created for SCCM 2012 SP1 CU3 so that the new systems get the new SCCM 2012 SP1 CU3 client?
Thanks,
Nick

Hi,
Here's some good information to look over:
http://sccmfaq.wordpress.com/2013/09/24/sccm-2012-include-cu-in-osd/
I haven't followed these instructions myself, since I haven't really had any good reason to include CUs during the initial installation process. I use this method instead and I've never run into any problems:
http://www.ronnipedersen.com/2013/06/installing-sccm-2012-sp1-cu2-quick-start-guide/
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

SCCM 2012 Distribution Communication issues

I need help to see as to why all of the sudden I have lost communication to all my DP, I can not copy any content to the DPs except one...sorry I have omitted all the names of the DPs.

Is there something specific about the one that is working? Is it the DP on the Primary Site Server? Has someone been tinkering around with the local administrators group on the others (perhaps trying to implement Restricted Groups)?
Have there been network changes - firewalls (including Windows local)??
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM 2012 - Maintenance Windows Issue with Update Deployment using Task Sequence

Hi Guys,
I have a question for you!!
We use a Task Sequence to deploy "Patch Tuesday" security fix; we use the integrated step "Install Software Update" and the Task Sequence run during Maintenance Windows (1 hour).
We notice that the time remaining is not recalculated on every software update installation occur (http://blogs.technet.com/b/csloyan/archive/2010/10/24/maintenance-window-calculations-explained.aspx);
it's correct?
The formula indicated in the link above is not considered in this type of software update deployment (Install Software Update task sequence step)?
Thanks a lot.
David

Hi,
Any update?
Is the time remaining recalculated after each update is installed when using the Software Update Group directly as Torsten said?
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCCM 2012 Client delpoyment in SCCM 2007 Native world

Hi Team,
In my account I have SCCM 2007 running in Native mode.... we do not support internet based clients there..but work on HTTPS only. Now I have implemented SCCM 2012 R2 there and now testing the client migration so that I can upgrade the SCCM client agent from
2007 to 2012. In SCCM 2012 we have to support internet based clients and so the SCCM 2012 client which we need to install should be compatible on internet and intranet both
The plan is to use the existing SCCM 2007 infra to do that. Send the ccmsetup.exe ( of SCCM 2012 ) in a package to all the clients via SCCM 2007 Software Distribution and trigger SCCM 2012 installation.
Just to do a small test I did this :
1. Created a folder in C drive of a client machine and copied the ccmsetup.exe ( of SCCM 2012 ) in it.
2. Tried to trigger the installation with below mentioned commandlines..... but getting error as mentioned below.... Please help.
Command line used :
Here ABCD.contoso.org is the intranet MP and PQRS.dmzone.org is internet MP
CCMSetup.exe /UsePKICert /NoCRLCheck smsmp=ABCD.contoso.org ccmhostname=PQRS.dmzone.org smssitecode=ABC
CCMSetup.exe /UsePKICert /NoCRLCheck smsmp=ABCD.contoso.org smssitecode=ABC
CCMSetup.exe smsmp=ABCD.contoso.org smssitecode=ABC
Error in ccmsetup.log
<![LOG[==========[ ccmsetup started in process 3068 ]==========]LOG]!><time="12:49:12.547+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="5076" file="ccmsetup.cpp:9441">
<![LOG[Running on platform X64]LOG]!><time="12:49:12.548+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="5076" file="util.cpp:1892">
<![LOG[Updated security on object C:\Windows\ccmsetup\cache\.]LOG]!><time="12:49:12.548+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="5076" file="ccmsetup.cpp:9285">
<![LOG[Launch from folder C:\Windows\ccmsetup\]LOG]!><time="12:49:12.548+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="5076" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1401]LOG]!><time="12:49:12.549+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="5076" file="ccmsetup.cpp:727">
<![LOG[Successfully started the ccmsetup service]LOG]!><time="12:49:12.550+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="4744" file="ccmsetup.cpp:3271">
<![LOG[Deleted file C:\Windows\ccmsetup\ccmsetup.exe.download]LOG]!><time="12:49:12.551+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="4744" file="ccmsetup.cpp:9497">
<![LOG[In ServiceMain]LOG]!><time="12:49:12.552+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmsetup.cpp:3365">
<![LOG[Folder 'MicABCoft\Configuration Manager' not found. Task does not exist.]LOG]!><time="12:49:12.556+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="4744"
file="wintask.cpp:622">
<![LOG[CcmSetup is exiting with return code 0]LOG]!><time="12:49:12.556+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="4744" file="ccmsetup.cpp:10879">
<![LOG[Running on 'MicABCoft Windows 7 Enterprise ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18]LOG]!><time="12:49:12.618+300" date="11-11-2014" component="ccmsetup" context="" type="1"
thread="3284" file="util.cpp:1974">
<![LOG[Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/UsePKICert" "/NoCRLCheck" "smssitecode=ABC"]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup"
context="" type="1" thread="3284" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context=""
type="1" thread="3284" file="ccmsetup.cpp:3775">
<![LOG[Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/UsePKICert" "/NoCRLCheck" "smssitecode=ABC"]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup"
context="" type="1" thread="3284" file="ccmsetup.cpp:3776">
<![LOG[SslState value: 448]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmsetup.cpp:4425">
<![LOG[CCMHTTPPORT: 80]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8621">
<![LOG[CCMHTTPSPORT: 443]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8636">
<![LOG[CCMHTTPSSTATE: 448]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8654">
<![LOG[CCMHTTPSCERTNAME: ]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8672">
<![LOG[FSP: ]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8724">
<![LOG[CCMFIRSTCERT: 1]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8782">
<![LOG[HTTPS is enforced for Client. The current state is 31.]LOG]!><time="12:49:12.621+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmutillib.cpp:403">
<![LOG[Begin searching client certificates based on Certificate Issuers]LOG]!><time="12:49:12.623+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmcert.cpp:4393">
<![LOG[Completed searching client certificates based on Certificate Issuers]LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmcert.cpp:4550">
<![LOG[Begin to select client certificate]LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmcert.cpp:4706">
<![LOG[The 'Certificate Selection Criteria' was not specified, counting number of certificates present in 'MY' store of 'Local Computer'.]LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context=""
type="0" thread="3284" file="ccmcert.cpp:4742">
<![LOG[1 certificate(s) found in the 'MY' certificate store.]LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmcert.cpp:4770">
<![LOG[Only one certificate present in the certificate store.]LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmcert.cpp:4774">
<![LOG[Begin validation of Certificate [Thumbprint 50051EB74624621341900739D65706D8089A0941] issued to 'D-LJACKNVM7X64.ABClan.org']LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context=""
type="1" thread="3284" file="ccmcert.cpp:1662">
<![LOG[Failed to get certificate key provider information. Error 0x80092004]LOG]!><time="12:49:12.626+300" date="11-11-2014" component="ccmsetup" context="" type="3" thread="3284" file="ccmcert.cpp:1199">
<![LOG[The Certificate [Thumbprint 50051EB74624621341900739D65706D8089A0941] issued to 'D-LJACKNVM7X64.ABClan.org' has 'Client Authentication' capability.]LOG]!><time="12:49:12.633+300" date="11-11-2014" component="ccmsetup"
context="" type="0" thread="3284" file="ccmcert.cpp:582">
<![LOG[Completed validation of Certificate [Thumbprint 50051EB74624621341900739D65706D8089A0941] issued to 'D-LJACKNVM7X64.ABClan.org']LOG]!><time="12:49:12.633+300" date="11-11-2014" component="ccmsetup" context=""
type="1" thread="3284" file="ccmcert.cpp:1803">
<![LOG[>>> Client selected the PKI Certificate [Thumbprint 50051EB74624621341900739D65706D8089A0941] issued to 'D-LJACKNVM7X64.ABClan.org']LOG]!><time="12:49:12.633+300" date="11-11-2014" component="ccmsetup"
context="" type="1" thread="3284" file="ccmcert.cpp:4850">
<![LOG[Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:A5879665-7A1B-4529-827E-52FA34ABD384";
DateTime = "20141111174912.640000+000";
HRESULT = "0x00000000";
ProcessID = 3068;
ThreadID = 3284;
]LOG]!><time="12:49:12.640+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="event.cpp:715">
<![LOG[Failed to submit event to the Status Agent. Attempting to create pending event.]LOG]!><time="12:49:12.643+300" date="11-11-2014" component="ccmsetup" context="" type="2" thread="3284"
file="event.cpp:737">
<![LOG[Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:A5879665-7A1B-4529-827E-52FA34ABD384";
DateTime = "20141111174912.640000+000";
HRESULT = "0x00000000";
ProcessID = 3068;
ThreadID = 3284;
]LOG]!><time="12:49:12.643+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="event.cpp:770">
<![LOG[Successfully submitted pending event to WMI.]LOG]!><time="12:49:12.648+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="event.cpp:813">
<![LOG[CCMCERTID: MY;50051EB74624621341900739D65706D8089A0941]LOG]!><time="12:49:12.649+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmsetup.cpp:8803">
<![LOG[No MP or source location has been explicitly specified. Trying to discover a valid content location...]LOG]!><time="12:49:12.649+300" date="11-11-2014" component="ccmsetup" context="" type="1"
thread="3284" file="ccmsetup.cpp:4729">
<![LOG[Looking for MPs from AD...]LOG]!><time="12:49:12.649+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:4737">
<![LOG[Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=ABC))']LOG]!><time="12:49:13.226+300" date="11-11-2014" component="ccmsetup" context="" type="0"
thread="3284" file="lsad.cpp:657">
<![LOG[OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>ABC</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=ABC</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain
Value="ABClan.org" /><Forest Value="ABCroot.org" /></ClientOperationalSettings>']LOG]!><time="12:49:13.378+300" date="11-11-2014" component="ccmsetup" context="" type="0"
thread="3284" file="lsadcache.cpp:236">
<![LOG[The MP name retrieved is 'ABCD.contoso.org' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>']LOG]!><time="12:49:13.381+300"
date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="lsadcache.cpp:334">
<![LOG[MP 'ABCD.contoso.org' is not compatible]LOG]!><time="12:49:13.382+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="lsadcache.cpp:345">
<![LOG[Retrieved 0 MP records from AD for site 'ABC']LOG]!><time="12:49:13.382+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="lsadcache.cpp:287">
<![LOG[FromAD: command line = SMSSITECODE=ABC]LOG]!><time="12:49:13.383+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmsetup.cpp:288">
<![LOG[Local Machine is joined to an AD domain]LOG]!><time="12:49:13.383+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="lsad.cpp:715">
<![LOG[Current AD forest name is ABCroot.org, domain name is ABClan.org]LOG]!><time="12:49:13.386+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="lsad.cpp:843">
<![LOG[Domain joined client is in Intranet]LOG]!><time="12:49:13.386+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="lsad.cpp:1048">
<![LOG[CMPInfoFromADCache requests are throttled for 01:07:08]LOG]!><time="12:49:13.386+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="lsadcache.cpp:173">
<![LOG[No valid source or MP locations could be identified to download content from. Ccmsetup.exe cannot continue.]LOG]!><time="12:49:13.386+300" date="11-11-2014" component="ccmsetup" context="" type="3"
thread="3284" file="ccmsetup.cpp:4806">
<![LOG[Failed to parse '"C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/UsePKICert" "/NoCRLCheck" "smssitecode=ABC"' with error 0x80004005]LOG]!><time="12:49:13.386+300" date="11-11-2014"
component="ccmsetup" context="" type="3" thread="3284" file="ccmsetup.cpp:4611">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="12:49:13.386+300" date="11-11-2014" component="ccmsetup" context="" type="1"
thread="3284" file="ccmsetup.cpp:9767">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='307' will not be sent.]LOG]!><time="12:49:13.387+300" date="11-11-2014" component="ccmsetup" context="" type="1"
thread="3284" file="ccmsetup.cpp:9767">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="12:49:13.388+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="5076" file="ccmsetup.cpp:10883">

Hi Jason,
Thanks for your reply..... I tried with /mp switch.... but same error.... if you look at the logs it says
<![LOG[MP 'ABCD.contoso.org' is not compatible]LOG]!><time="12:49:13.382+300"
date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="lsadcache.cpp:345">
<![LOG[Retrieved 0 MP records from AD for site 'ABC']LOG]!>
Not sure why it is saying " not compatible " ... its a valid MP..... from the same client machine below links are working fine..
http://ABCD.contoso.org/sms_mp/.sms_aut?mpcert
http://ABCD.contoso.org/sms_mp/.sms_aut?mplist
Thanks,
Sam

SCCM 2012 clients in SCCM 2007 console

Hi
If a Windows 7 system has sccm 2012 client installed, will it get discovered in SCCm 2007 console.
Regards Sushain KApoor

If you enable AD discovery to this client, the client object will be discovered. Anyway, the SCCM 2012 clients cannot be managed by SCCM 2007. See below.
Configuration Manager also checks that you have assigned the Configuration Manager 2012 client to a site that supports the Configuration Manager client version. If you have used automatic site assignment and the client is assigned to a Configuration Manager
2007 site, the client automatically tries to find a Microsoft System Center Configuration Manager 2012 site. It first checks Active Directory Domain Services and if this is not successful (for example, the Active Directory schema is not extended or the computer
is a workgroup client), the client then checks for site information from its assigned management point. However, if the client was assigned with a specific site code and assigns to a Configuration Manager 2007 site, site assignment fails and you must manually
reassign the client to a Microsoft System Center Configuration Manager 2012 site.
Juke Chou
TechNet Community Support

Issue with sccm client installation

hi,
iam facing issue with sccm client 2007 installation on secondary site.please find the logs below,

Refer for the above error : http://www.myitforum.com/forums/MSI-SMS-Advanced-Client-does-not-support-peruser-installations-m183336.aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

SCCM 2007 to SCCM 2012 client migration via Powershell

Hi
I'm looking for a controlled way to migrate a SCCM 2007 server client to SCCM 2012. A push of SCCM Console is no option.
I 'll do all the testing but hoped to gain some time by having these questions answered:
*can an install of SCCM 2012 client be remotely triggered in one go (no uninstall of 2007 needed)?
*if uninstall is needed (of sccm 2007 client), does it need a reboot?
What command to use (preferrably powershell):
\\ourserver\Client\ccmsetup.exe" -argumentlist "SMSSITECODE=sitecode","SMSMP=oursccmserver","SMSCACHESIZE=8000","FSP=oursccmserver","CCMLOGMAXSIZE=104857600"
OR (guess that's the command SCCM is using)
Install-CMClient-DeviceName$ComputerName-IncludeDomainController$False-SiteCodePRD-ForceReinstall$True-AlwaysInstallClient$True-Verbose
J.
Jan Hoedt

do I need to import the machine in SCCM 2012 also or launching the SCCM 2012 install from a SCCM 2007
will do this?
How will you do that? This does not work at all when using client push obviously. You can only use packages/programs to update clients to CM12 in that case and that's something you did not want to do.
Torsten Meringer | http://www.mssccmfaq.de

App-V 5.0 SP2 user applications published via SCCM 2012 to VDI workstations with roaming only

Hi,
The environment consists of App-V 5.0 SP2 (KB2956985) user based applications published via SCCM 2012 to Windows 7 VDI snapshotted workstations that are reset at user logoff.
When a user logs on the SCCM 2012 client initiates App-V client package publishing. After a couple of minutes after logon the shortcuts appear and the user can launch their applications.
The issue is that at logoff, even with roaming enabled, the publishing information disappears. This causes the next logon process for that user to repeat, the applications are not available until the SCCM client has completed it's publishing cycle.
Roaming profiles are implemented. %APPDATA% is redirected to a UNC path. The following registry key is set
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\AppV\Client\Integration\PreserveUserIntegrationsOnLogin=1
U-EV, global publishing of applications, and AppLocker rules are not an option. Also, I have read this already - http://technet.microsoft.com/en-us/library/dn659478.aspx#BKMK_PE
I do not want to wait for the SCCM client to kick in prior to the user applications being available. What do I need to roam or run to create a seamless transition for the user between sessions?
Eddie.

Hi Tywin (bad username considering the last GoT Episode ;))
If you ask Microsoft, they always recommend using SCCM for deploying App-V packages and reuse your current SCCM infrastructure if that is already in place. Problem is, as you now experience, is that there is some big caveats both in regards to publishing
time and to roaming of settings.
As Nické states I would suggest looking into the Full Infrastructure Model for App-V 5.x, which gives you much better performance in what I call "from no apps" to "being able to click the shortcut" - the add and publishing phase. If you don't have the time/budget/whatever
to start looking into that, you could look into some community tools like App-V Scheduler which is developed specific by Citrix guys to ease the publishing and management in a Citrix world.
Microsoft have a great article about Performance Guidelines, which you have read, but it mostly presumes you work with Full Infrastructure. Have you looked into Steve Thomas' session from TechEd NA? It talks about "implementation trends".
Senior Consultant at Atea Denmark - http://Atea.dk Atea Technical Evangelist for App-V NoLightPeople - http://NoLightPeople.com Access Director - http://www.nolightpeople.com/index.aspx#accessdirector

SCCM 2012 Client - missing client actions.

Hi,
I am having an issue with a SCCM 2012 client where I am only seeing the actions:
Machine Policy & Evaluation Cycle
User Policy & Evaluation Cycle.
I click on the Machine Policy Evaluation cycle and nothing happens.
What log file should I be checking to see if the other client actions are
downloaded?
Thanks,
Ward

Hi,
Any errors in these logs?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Send SCCM 2012 client or re-send client to individual computer

We have a tech tools web portal and I need to add an item so techs can send the SCCM 2012 client to a machine. This will be used if they have to reinstall the client for some reason.
I had planned to use PowerShell and created the script only to find out that it requires too great a permissions role to connect to the SCCM drive so the cmdlets can be used.
I then thought I could just create a .CCR for a computer. But, the format for SCCM 2007 does not work for SCCM 2012.
Reasons we are approaching this in this manner are:
1) We want to install using the CURRENT client files. And, we don't want to copy those off to some other location and need to remember to update them when we update SCCM 2012.
2) We want the retry capability that comes with using .CCRs.
3) We want the "smartness" of the client install we have found. We have a distributed operation and doing the client install by an SCCM admin from the PowerShell script or via the right-click in the console allows SCCM to find the closest DP and
use client install files from a local source when available.
4) We have a LOT of desktop techs that we do not want having access to the SCCM console. There is just too high a learning curve. We want a simple tool.
One other thing to mention ... we cannot use the Generate CCR tool because we are not turning on client push (lots of valid reasons for this and some the SCCM admins don't think are valid, but the decision has been made for us :) )
Anyone have thoughts on how to have a simple tool to send the client install via script or .CCR?
Thanks in advance!

You can't turn client push off -- you can turn *auto*-client push off though. The Generate CCR tool does not depend upon *auto*-client push though so there's no reason you can't use it.
Here's a blog post on the changes in the CCR process:
http://blogs.technet.com/b/neilp/archive/2012/07/03/client-push-installation-changes-in-configuration-manager-2012-and-how-to-take-advantage-of-these-for-troubleshooting-purposes.aspx
Jason | http://blog.configmgrftw.com

SCCM 2012 Client Communication Issue with SCCM 2007

Similar Messages

Maybe you are looking for