SCCM 2012 Client Installed - Console Shows No Client Installed

Can anyone help me to figure out why in world clients are not reporting back to console. In the pc I can see configurations manager installed but then again in console it say no client. I have bounderies ip are config, and I extended the AD schema. I deploy
agents thru sccm by just client push installations.

Here's for the ClientIDManagerStartup.log
<![LOG[RegTask: Failed to send registration request message. Error: 0x87d00231]LOG]!><time="11:25:13.421+300" date="05-21-2012" component="ClientIDManagerStartup" context="" type="3" thread="1388" file="regtask.cpp:1283">
<![LOG[RegTask: Failed to send registration request. Error: 0x87d00231]LOG]!><time="11:25:13.421+300" date="05-21-2012" component="ClientIDManagerStartup" context="" type="3" thread="1388" file="regtask.cpp:1469">
For CCMMessaging.log
]LOG]!><time="11:25:13.374+300" date="05-21-2012" component="CcmMessaging" context="" type="1" thread="1388" file="event.cpp:729">
<![LOG[Successfully sent location services HTTP failure message.]LOG]!><time="11:25:13.420+300" date="05-21-2012" component="CcmMessaging" context="" type="1" thread="1388" file="ccmhttperror.cpp:395">
<![LOG[Post to http://server.domain.com/ccm_system_windowsauth/request failed with 0x87d00231.]LOG]!><time="11:25:13.421+300" date="05-21-2012" component="CcmMessaging" context="" type="2" thread="1388" file="messagequeueproc_outgoing.cpp:430">
<![LOG[EndpointMessage(Queue='MP_SinvEndpoint', ID={82DB9033-E0D1-4772-BC80-84822EEC38EB}): Will be discarded (0x87d00298).]LOG]!><time="11:27:03.706+300" date="05-21-2012" component="CcmMessaging" context="" type="3" thread="5644" file="messagequeueproc_endpoint.cpp:902">
<![LOG[EndpointMessage(Queue='MP_DdrEndpoint', ID={8BDE830C-BC5F-4793-888C-A960D2213141}): Will be discarded (0x87d00298).]LOG]!><time="11:27:16.551+300" date="05-21-2012" component="CcmMessaging" context="" type="3" thread="880" file="messagequeueproc_endpoint.cpp:902">
<![LOG[EndpointMessage(Queue='MP_HinvEndpoint', ID={6D702650-0AA2-4276-B1EA-90E296B4317B}): Will be discarded (0x87d00298).]LOG]!><time="11:27:48.506+300" date="05-21-2012" component="CcmMessaging" context="" type="3" thread="880" file="messagequeueproc_endpoint.cpp:902">
<![LOG[Raising event:

Similar Messages

CM Console shows that client installed no

I noticed that new CM 2012 R2 clients installed are not showing in the console anymore as active clients. After six hours console still shows that these machines doesn't have client installed. All existing clients work fine. Clients are installed to all
these machine by task sequence. When I open the client settings from problematic machine I can see that it's correctly assigned to site and management point.
Good ideas where to start with this one?

Does the correct MP show up in LocationServices.log, ClientLocation.log? Any errors in ccmmessaging.log, ClientIDManagerStartup.log?
Just a single line from a logfile does not help too much unfortunately.
Torsten Meringer | http://www.mssccmfaq.de

SCCM 2012 MOF changes not showing up on clients

Just updated my configuration.mof for getting a registry entry for a windows build rev. and it checked out well using MOFCOMP -CHECK Configuration.mof and then swapped it out with the live configuration.mof file. I then imported the reporting class
into SCCM HWInv GUI and it checked out fine. Dataloader created the tables/views in the SCCM DB and all seems well.
However, my clients are not picking up the HW inventory class updates and are not reporting in. Its been over a day so it shouldn't be replication. Where should I look to troubleshoot this?
Please help.
Thanks
Dave

Take a look at these two blogs. The first one is from the site server to the client. The second one is from the client to the site server.
http://be.enhansoft.com/post/2014/02/20/Inventory-Workflow-From-Client-Agent-Settingssms_defmofconfigurationmof-to-the-Client.aspx
http://be.enhansoft.com/post/2013/07/25/Troubleshooting-Inventory-Flow.aspx
http://www.enhansoft.com/

Sccm 2012 does not pushing updates to clients

hi
I have query I have installed sccm2012 and wsus on same machine and sccm is integrating with wsus but my sccm not pushing updates to clients in my enviorment .

hello Jörgen
yes i have deployed the updates
but updates are not showing on client computers can you suggest me what would i do?
Regards,
Avinash

After installing SCCM 2012 R2 CU4, I show a Distribution Point warning that won't clear.

I recently installed SCCM 2012 R2 CU4 on a LAB environment, and nowhere is it more important to wait until all requisite site roles are reinstalled before doing anything else.
I did, and still do, have an warning/ error on the Site components that shows up on one of the child primary sites after the CU4 installation.
Distribution Manager has not tried to install IIS component of operating system to distribution point “[“Display=\\SCxxx\”]MSWNET:[“SMS_SITE=xxx”]\\xxx\”. You should install and configure IIS manually. Please ensure RDC is also enabled.
IIS is installed, RDC is enabled, but I get this error. What could be the real issue?

Hi,
So you have tried to reinstall IIS conponents and DP?
Have you checked the distmgr.log? Anything helpful?
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCCM 2012 R2 - WindowsUpdate.log showing error 0x80240037

Hi,
Setup details:
1) OS: Windows 2012 R2
2) SCCM version: SCCM 2012 R2 with SUP role (WSUS v6.3.9600.16384)
3) SQL: SQL 2012
All the above resides on a single machine.
Error description:
Windows 2012 R2 Server clients are not reporting back to the server. "Required" column is showing "0" for all security updates. Investigation in the WindowsUpdate.log shows "WARNING: Failed to get WU Exemption info from NLM,
assuming not exempt error = 0x80240037".
Latest updates are downloaded, synchronized and deployed via SUP but the clients are not receiving the updates. Please advise. Thanks.
Regards,
KL

Hi,
You may check the following blog.
http://blogs.technet.com/b/sus/archive/2012/09/05/additional-note-on-kb-2734608-regarding-wsu-windows-8-and-windows-server-2012.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012: Application deployment stuck on 'Waiting to install '

I am setting up many new machines in the last month. But sometimes, when installing applications after rolling out an image. The applications wont install and display the waiting to install message. This mostly last for 1-2 hours but sometimes ever longer.
None of the logs that I have checked seem to give any indication why it will not move forward. Any
thoughts on how to troubleshoot?
For what it's worth, we are setup with a standalone primary site with one distribution point installed. SCCM 2012 SP1.
Thanks in advance.

I see many error messages concerning BITS. This is a part of the DataTransferService.logDTSJob {183F4DC8-B329-4648-B351-D72BE3759642} in state 'DownloadingData'. DataTransferService 22/08/2014 15:26:24 7428 (0x1D04)
CDTSJob::HandleErrors: DTS Job '{183F4DC8-B329-4648-B351-D72BE3759642}' BITS Job '{FC9A9789-B3B1-4804-A59F-22E08B6D6F3A}' under user 'S-1-5-18' OldErrorCount 0 NewErrorCount 1 ErrorCode 0x80190194 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
CDTSJob::HandleErrors: DTS Job ID='{183F4DC8-B329-4648-B351-D72BE3759642}' URL='http://SITE SERVER:80/SMS_MP' ProtType=1 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
CDTSJob::JobError: DTS Job ID='{183F4DC8-B329-4648-B351-D72BE3759642}' BITS Job ID='{FC9A9789-B3B1-4804-A59F-22E08B6D6F3A}' ErrorCode=0x80190194 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
CDTSJob::JobError: DTS Job ID='{183F4DC8-B329-4648-B351-D72BE3759642}' URL='http://SITE SERVER:80/SMS_MP' ProtType=1 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
DTS job {183F4DC8-B329-4648-B351-D72BE3759642} BITS job {FC9A9789-B3B1-4804-A59F-22E08B6D6F3A} failed to download source file http://SITE SERVER:80/SMS_MP/.sms_pol?%7BC2FB5733-0FDF-4907-8617-29B1DC078E83%7D/15.1_00 to destination C:\Windows\CCM\Temp\{F001BFC6-8830-46F3-96B8-9CC08B1A4539}.tmp with error 0x80190194 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
DTS job {183F4DC8-B329-4648-B351-D72BE3759642} BITS job {FC9A9789-B3B1-4804-A59F-22E08B6D6F3A} partially completed 0/1 with error 0x80190194 context 5 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
DTSJob {183F4DC8-B329-4648-B351-D72BE3759642} in state 'Error'. DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
DTSJob {183F4DC8-B329-4648-B351-D72BE3759642} in state 'NotifiedComplete'. DataTransferService 22/08/2014 15:26:24 7428 (0x1D04)
DTS job {183F4DC8-B329-4648-B351-D72BE3759642} has completed:
Status : ERROR (0x80070002),
Start time : 08/22/2014 15:26:24,
Completion time : 08/22/2014 15:26:24,
Elapsed time : 0 seconds DataTransferService 22/08/2014 15:26:24 7428 (0x1D04)

I wan't setup for sccm 2012 read only console

i wan't setup for sccm 2012 read only console

There is role read only analyst please assign same to user or group.

IOS installed apps showing as not installed in App Store

This problem seemed to start when I was unable to pay my Apple bill. As is usual, the App Store wouldn't allow me to download apps and updates but I signed out my account and then back in and all of my pending app updates disappeared and in the Purchased section, it showed all of my apps as Not Installed in the way of it displaying the iCloud icon rather than Open button. I figured this was due to my Apple bill being unpaid so I forgot about it. Now at the end of the month when I was again able to pay my bill, I did so and yet my apps are all still showing as Not Installed, I should note though, that my apps are installed, available on my springboard and are usable. So I signed out my AppleID and signed back in but still no change.
I can just go through my Purchased list and press the iCloud button and it again recognises that the app is actually installed and then displays the Open button, but, I have maybe 300 apps installed on a Purchased list of over 1,000 apps so this would be a real pain.
Is there any better way for me to reconfigure these apps so they return to normal state?

Hello CCC,
It is happening on the following devices:
iPhone5
iPhone5s (two)
each have a "Family" generated iTunes account which has been associated to my iTunes account as the organizer. I would probably like to see it resolved on the iPhone5s (son and daughter) first and then the iPhone5 (wife).
2. I am also experiencing issues with "Mail" using IOS 8 in that email will not delete from my inboxes (same devices as above)...
3. I also have an issue with iCalendar not syncing events to my family members devices (iPhone5 and iPhone5S) using IOS 8. I entered my son's volleyball games into calendar on my macbook which is associated to my apple id as organizer and none of the other devices associated to other family iTunes account received the updates. I have an iPhone5 as well and I received the updates.
4. I am also experiencing issues with Family not recognizing pictures of family members which I have been trying to get fixed up.
I don't think I have ever experienced this many glitches when updating to a new version from Apple before:(. I sure hope this is not going to be the new norm.
I have also noticed that Health kit does not allow you to change the unit of measures within the application that it forces you to use the country's standard. This might be fine for younger individuals but as for me who grew up learning imperial and changed to metric halfway through school I would prefer the option to choose which unit of measure to use.
Thanks for taking the time to respond,
Dregor104

WRT54G v6 client table not showing wired clients

I have a WRT54G v6 using the lastest firmware. Is there any 3rd party software that can display what clients I have on my network? The reason I'm asking is because my router will only show the wireless clients and not the ones connected on the wired side. Other than that everything works fine.

I have similar problem. DHCP client table shows only wireless laptops using dynamic ip address. All my wired destop (dynamic ip), and other static ip devices both wired or wireless do not show up in DHCP client table. Any idea? I have v8.

SCCM 2012 - Reports don´t show reality

Hello all.
I´m trying to get reports for software titles that have not been used during a specified period of time trough default report "Software 09A".
The problem is the results don´t show the real situation. For example, got a 11k days unused software, like 30 years. =]
And more: some used softwares show as unused, and vice versa.
Anyone has the same problem and/or a solution for it?
Thanks all!

Yes, I know this is an old post, but I’m trying to clean them up.
Did you solve this problem, if so what was the solution?
It sound like the issue is a corrupted SWM data for a PC. I would try to repair the client and see what changes happen. In the end their might not be anything that you can do short of deleting the PC from CM12 & letting it get re-created or running the
software on the PC to reset the usage data.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 - SUP - updates not showing as downloaded when they actualy are

Hello. I have a strange problem.
I have collected my updates by year to have an overview of what is still updates..
In the console I have 4 updates showing as not downloaded.
If I highlight these and choose to download I get this
So appearantly it works. However these continue to show as not downloaded. R
My WSUS installation uses a SQL database on a proper sql server.
Help needed

Nothing happened in the logfile. I have no clue to what is happening. What I ended up doing was that I recreated the Software Update Group with the exact same updates and downloaded it again. Problem solved. The views in the console are made from SQL
queries. Guess the download process just didnt finish its sql job.
Old log history is of course gone but I will post the logfile here if/when it happens again.

SCCM 2012 R2- Report that show running service

Is there a way to report running services on a client, and what user is running them?
Thanks in advanced for your help.

Just in case anyone needs it, here is the Query I used. Thanks for the answer above Jason :)
SELECT
SCCM_Ext.vex_GS_SERVICE.StartName0
,SCCM_Ext.vex_GS_SERVICE.Name0
,SCCM_Ext.vex_GS_SERVICE.DisplayName0
,SCCM_Ext.vex_R_System.Netbios_Name0
,SCCM_Ext.vex_R_System.Operating_System_Name_and0
,SCCM_Ext.vex_GS_SERVICE.PathName0
,SCCM_Ext.vex_GS_SERVICE.ServiceType0
,SCCM_Ext.vex_GS_SERVICE.StartMode0
,SCCM_Ext.vex_GS_SERVICE.Status0
,SCCM_Ext.vex_R_System.ResourceID AS [vex_R_System ResourceID]
,SCCM_Ext.vex_GS_SERVICE.ResourceID AS [vex_GS_SERVICE ResourceID]
,SCCM_Ext.vex_R_System.Resource_Domain_OR_Workgr0
FROM
SCCM_Ext.vex_GS_SERVICE
INNER JOIN SCCM_Ext.vex_R_System
ON SCCM_Ext.vex_GS_SERVICE.ResourceID = SCCM_Ext.vex_R_System.ResourceID
Skyhawk12

SCCM 2012 Configration Manager Console

Has anyone got the Configuration Manager Console 2012 working. I get an error when I launch, but no error in the sftlog.txt.
The error says "CLR error: 80004005 The program will not terminate. "
Thanks,
Jason

Ok, i have tried every which way possible with the suggestions above but i still cant get it running in the virtual environment, the 20 errors have been reduced down to 2 as follows! ______________________________________________________________________________
Application: Microsoft.ConfigurationManagement.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.Reflection.TargetInvocationException Stack: at System.RuntimeMethodHandle.InvokeMethod(System.Object,
System.Object[], System.Signature, Boolean) at System.Reflection.RuntimeMethodInfo.Invoke(System.Object, System.Reflection.BindingFlags, System.Reflection.Binder, System.Object[], System.Globalization.CultureInfo, Boolean) at System.Delegate.DynamicInvokeImpl(System.Object[])
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.DispatcherOperation.InvokeImpl()
at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(System.Object) at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext,
System.Threading.ContextCallback, System.Object, Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.ProcessQueue()
at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef) at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate,
System.Object, Int32) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.DispatcherOperation.InvokeImpl() at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object,
Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.InvokeImpl(System.Windows.Threading.DispatcherOperation,
System.Threading.CancellationToken, System.TimeSpan) at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr,
Int32, IntPtr, IntPtr) at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef) at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame) at System.Windows.Threading.Dispatcher.PushFrame(System.Windows.Threading.DispatcherFrame)
at System.Windows.Threading.Dispatcher.Run() at System.Windows.Application.RunDispatcher(System.Object) at System.Windows.Application.RunInternal(System.Windows.Window) at System.Windows.Application.Run(System.Windows.Window) at Microsoft.EnterpriseManagement.ConsoleFramework.ConsoleApplication.LaunchWindow()
at Microsoft.EnterpriseManagement.ConsoleFramework.ConsoleApplication.Run() at Microsoft.ConfigurationManagement.AdminConsole.Program.Main() ______________________________________________________________________________
AND
Faulting application name: Microsoft.ConfigurationManagement.exe, version: 5.0.7711.0, time stamp: 0x4f42f40f Faulting module name: KERNELBASE.dll, version: 6.1.7601.17651, time stamp: 0x4e2111c0 Exception code: 0xe0434352 Fault offset: 0x0000d36f Faulting
process id: 0x580 Faulting application start time: 0x01cdd922b11a970d Faulting application path: Q:\Configuration Manager Console 2012\VFS\CSIDL_PROGRAM_FILES\Microsoft Configuration Manager\AdminConsole\bin\Microsoft.ConfigurationManagement.exe Faulting module
path: C:\Windows\system32\KERNELBASE.dll ______________________________________________________________________________
Literally starting to rip my hair out with this, any help would be hugely appreciated with a chocolate biscuit! Ian

SCCM 2012 - Deleted advertisement still trying to get installed on servers

During 2012 upgrade I managed to deploy the SP1 Cumulative update 4 - server update - package to a group of servers that don't have the configuration manager installed.
I deleted that deployment from the server group but the package is still trying to get installed multiple times a day leaving a random folder on D: (Example: D:\25234HDF344D6H72K)
Please advise on how I can sort this out, the volume is filling up with new directories

To clarify and verify, did you deploy the package or the software update?
Either way, Garth's point is valid.
Jason | http://blog.configmgrftw.com

SCCM 2012 Client Installed - Console Shows No Client Installed

Similar Messages

Maybe you are looking for