SCCM 2012 Client - Manual Installation Error

Hi,
I am trying to install SCCM client manually on few of the machines that have Windows 7 OS. The installation is failing with the below error:
Failed to get client version for sending messages to FSP. Error 0x8004100e
BITS job creation failed with 80200014. Unable to check BITS version
This Operating System does not contain the correct version of BITS. BITS 2.5 or later is required.
Failed to get client version for sending messages to FSP. Error 0x8004100e
But Windows 7 comes with BITS 4.0 version. Below is the command I ran to install the client:
CCMSetup.exe /mp:<MP name> /logon SMSSITECODE=<code> FSP=<FSP name>
I even tried running with BITS priority switch:
CCMSetup.exe /mp:<MP name> /logon /BITSPriority:LOW SMSSITECODE=<code> FSP=<FSP name>
Thank you!
NM

Try installing ccmsetup manually with the parameter /BITSpriority:low:
ccmsetup.exe /BITSpriority:low
http://teacheritblog.wordpress.com/2013/08/07/configmgr-client-install-bits-error-on-windows-7-sccm/
http://social.technet.microsoft.com/Forums/en-US/2db264c9-1769-4f6b-bb77-5dcf1106fd18/sccm-2012-agent-installation-using-orchestrator
Regards, Ibrahim Hamdy

Similar Messages

Sccm 2012 client push installation error 120 & 1350

what i can do to resolve this problem a lot of client push installation skipped and get error 120 & 1305

Hi Alaa,
The problem is when you initiated your client push for these clients you forgot to force it.
The machines you are trying to deploy to already have a CCM client or a failed/corrupt installation.
You must re-initiate the client push install for the failing machines, and remember to tick off the
'Always Install the client software' option. This repairs failed/corrupt installations also.
The error code 120 tells you this way:
120 - Mobile client on the target machine has the same version, and 'forced' flag is not turned on. Not processing this CCR ,target machine already have cm client and no force install selected(always install).
1305 - is just that the client push cannot detect which version that is already installed.
All the best, Jesper Hassing - MCTS SCCM 2012 - MCSA 2012 Server - MCP

SCCM 2012 Client Installation Errors & Solutions

Hello,
Can we figure out all SCCM 2012 Client installation errors and solutions ?
Cheer's Up
Best Regard's Krishna

Hi,
Error codes are easiest looked up in CMtrace, making one general list of errors and solutions is hard, in many scenarios there are different solutions to an error based on the infrastructure and differences between environments
Error lookup in cmtrace.
http://blogs.technet.com/b/configmgrdogs/archive/2012/06/07/trace32-exe-cmtrace-exe-hidden-features.aspx
Here is a blog on troubleshooting client installations issues, it is for sccm 2007 but a lot of the content is still valid.
http://blogs.technet.com/b/sudheesn/archive/2010/05/31/troubleshooting-sccm-part-i-client-push-installation.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Error installing SCCM 2012 client on server

Hi Guys,
I am trying to install the SCCM 2012 client on a machine in my domain. The account specified in client settings is indeed a local admin on this server, but I get the error below:
Any assistance much appreciated!

Hi GSS1,
You can check on the C:\Windows\ccmsetup\logs , files: ccmsetup.log and client.msi.log for errors of clues about the real failure.
On the other hand I would recommend you the manual installation from the UNC path, like:
\\SCCMServerName\SMS_sitecode\Client\ccmsetup.exe
and using the parameters listed here to define the settings: https://technet.microsoft.com/en-us/library/bb693546.aspx?f=255&MSPPError=-2147217396
Optionally you can copy the files from the \\...\Client\ folder to local and try a local installation.
Any of this steps will give you more clues about the failure if they fail or success.
Please share any update for more suggestions!

SCCM 2012 client installation not happening

Hi,
I'm having issues while installing SCCM 2012 client on "Microsoftr Windows Serverr 2008 Standard SP-1"
I have tried manual install and uninstall also several time. And all the revelent services are also working fine
and I'm having below issue:
Some tabs are missing:
CCM Notification Agent is disabled.

Here are the attached log files.
This is CCMSetup.log
<![LOG[MSI: Action 10:22:51: SmsSetLUAAccessPermissions. >Gets permission for evelation on Vista and grants each COM object permission.]LOG]!><time="10:22:51.744-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:22:51: Ngen. Calling NGEN.exe]LOG]!><time="10:22:51.760-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:12: InstallServices. Installing new services]LOG]!><time="10:23:12.445-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: WriteEnvironmentStrings. Updating environment strings]LOG]!><time="10:23:13.116-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmSetServiceConfig. Sets WMI ServiceRootDir and configures CCMEXEC service.]LOG]!><time="10:23:13.116-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmRegisterWinTaskRollback. Rolls back the changes made by CcmRegisterWinTask.]LOG]!><time="10:23:13.381-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmRegisterWinTask. Registers tasks with Windows Task Scheduler.]LOG]!><time="10:23:13.397-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmRollbackEvalTask. Rollback the creattion of Configuration Manager Client evaluation tasks.]LOG]!><time="10:23:13.412-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmCreateEvalTask. Create Configuration Manager Client evaluation tasks.]LOG]!><time="10:23:13.428-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: SmsMigrateInventory. Migrating SMS Legacy Client inventory settings]LOG]!><time="10:23:13.631-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmEnableAppVIntegration. Enable Configuration Manager Client integration with App-V.]LOG]!><time="10:23:13.631-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmConfigDCOM. Configures registry key permissions for the DCOM Components passed from CcmConfigDCOMInit.]LOG]!><time="10:23:13.662-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: SmsShellNotify. Notifies the shell for the file-association icon changes.]LOG]!><time="10:23:13.693-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: SmsSetClientConfig. Applies the configuration placed by SmsSetClientConfigInit and configures client framework.]LOG]!><time="10:23:13.709-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmInitializePolicy. Sets and initializes default policy.]LOG]!><time="10:23:13.724-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:16: CcmRegisterWFGina. Registers Write Filter Gina.]LOG]!><time="10:23:16.283-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:16: CcmRegisterWFGinaRollback. Rolls back the changes made by CcmRegisterWFGina.]LOG]!><time="10:23:16.298-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:16: CcmClearServiceSetupStamp. Clear the time stamp for blocking the ccmexec service from starting up during upgrade.]LOG]!><time="10:23:16.314-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:16: CcmRegisterProduct. If product is registered in MSI database, then product is registered with WMI.]LOG]!><time="10:23:16.329-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:16: CcmRegisterProductRollback. Calls CcmUnregisterProduct. Deletes the instance from the WMI in the Configuration Manager namespace using the ProductCode instance in the session.]LOG]!><time="10:23:16.345-120" date="07-01-2014"
component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:16: SmsInstallPrepDrvr. Installing Software Metering PREP Driver]LOG]!><time="10:23:16.345-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:16: StartServices. Starting services]LOG]!><time="10:23:16.439-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:17: CcmStartService. Starts the ccmexec service.]LOG]!><time="10:23:17.484-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:17: SmsCleanupDesktopMigrationInfo. Deletes backed up information on the disk.]LOG]!><time="10:23:17.499-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:17: SmsClientInstallSucceeded. Sends a wmi event to indicate client installation succeeded.]LOG]!><time="10:23:17.499-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:17: InstallFinalize. ]LOG]!><time="10:23:17.515-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:17: RollbackCleanup. Removing backup files]LOG]!><time="10:23:17.655-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:17: RemoveExistingProducts. Removing applications]LOG]!><time="10:23:17.687-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation succeeded.]LOG]!><time="10:23:17.827-120" date="07-01-2014" component="ccmsetup" context="" type="1" thread="3556" file="msiutil.cpp:831">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='400' will not be sent.]LOG]!><time="10:23:17.827-120" date="07-01-2014" component="ccmsetup" context="" type="1" thread="3556" file="ccmsetup.cpp:9428">
<![LOG[Deleted file C:\Windows\ccmsetup\ccmsetup.xml]LOG]!><time="10:23:17.827-120" date="07-01-2014" component="ccmsetup" context="" type="1" thread="3556" file="ccmsetup.cpp:9156">
<![LOG[Task 'Configuration Manager Client Upgrade Task' does not exist]LOG]!><time="10:23:17.843-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="wintask.cpp:571">
<![LOG[CcmSetup is exiting with return code 0]LOG]!><time="10:23:17.843-120" date="07-01-2014" component="ccmsetup" context="" type="1" thread="3556" file="ccmsetup.cpp:10540">
Here is Clientidmanagerstartup.log:
<![LOG['RDV' Identity store does not support backup.]LOG]!><time="10:26:18.985-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="3336" file="ccmidstore.cpp:372">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SMS_RemoteClient_Reassigned
ClientID = "GUID:523B833D-AB79-4DBC-B026-F01F1549ED3F";
DateTime = "20140701082618.985000+000";
LastAssignedSite = "";
MachineName = "KIEVM-XENE01";
NewAssignedSite = "EME";
ProcessID = 3652;
SiteCode = "EME";
ThreadID = 3336;
]LOG]!><time="10:26:19.001-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="3336" file="event.cpp:706">
<![LOG[Read SMBIOS (encoded): 56004D0077006100720065002D00340032002000320062002000300065002000610035002000300031002000310033002000360030002000300034002D0061003000200031006400200062003900200032003800200061003500200063006200200066003100200034006300]LOG]!><time="10:26:19.266-120"
date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="smbiosident.cpp:118">
<![LOG[Evaluated SMBIOS (encoded): 56004D0077006100720065002D00340032002000320062002000300065002000610035002000300031002000310033002000360030002000300034002D0061003000200031006400200062003900200032003800200061003500200063006200200066003100200034006300]LOG]!><time="10:26:19.266-120"
date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="smbiosident.cpp:184">
<![LOG[No SMBIOS Changed]LOG]!><time="10:26:19.266-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="smbiosident.cpp:65">
<![LOG[SMBIOS unchanged]LOG]!><time="10:26:19.266-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="ccmid.cpp:671">
<![LOG[SID unchanged]LOG]!><time="10:26:19.266-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="ccmid.cpp:688">
<![LOG[HWID unchanged]LOG]!><time="10:26:19.266-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="ccmid.cpp:705">
<![LOG[GetSystemEnclosureChassisInfo: IsFixed=FALSE, IsLaptop=FALSE]LOG]!><time="10:26:19.281-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="ccmid.cpp:215">
<![LOG[Windows To Go requires a minimum operating system of Windows 8]LOG]!><time="10:26:19.297-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="util.cpp:2902">
<![LOG[Computed HardwareID=2:235672F0CA7CA27255D20470050155D4B91872C8
Win32_SystemEnclosure.SerialNumber=<empty>
Win32_SystemEnclosure.SMBIOSAssetTag=<empty>
Win32_BaseBoard.SerialNumber=None
Win32_BIOS.SerialNumber=VMware-42 2b 0e a5 01 13 60 04-a0 1d b9 28 a5 cb f1 4c
Win32_NetworkAdapterConfiguration.MACAddress=00:50:56:AB:6A:BB]LOG]!><time="10:26:19.297-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="ccmid.cpp:476">
<![LOG[Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:235672F0CA7CA27255D20470050155D4B91872C8
HardwareID2=B332A505010000FA]LOG]!><time="10:26:19.297-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="ccmid.cpp:575">
<![LOG[RenewalTask: Executing renewal task.]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="768" file="regtask.cpp:2335">
<![LOG[Begin searching client certificates based on Certificate Issuers]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="768" file="ccmcert.cpp:3833">
<![LOG[Completed searching client certificates based on Certificate Issuers]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="768" file="ccmcert.cpp:3992">
<![LOG[Begin to select client certificate]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="768" file="ccmcert.cpp:4073">
<![LOG[There are no certificates in the 'MY' store.]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="768" file="ccmcert.cpp:4131">
<![LOG[Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:523B833D-AB79-4DBC-B026-F01F1549ED3F";
DateTime = "20140701082640.481000+000";
HRESULT = "0x87d00280";
ProcessID = 3652;
ThreadID = 768;
]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="768" file="event.cpp:706">
<![LOG[Unable to find PKI Certificate matching SCCM certificate selection criteria. 0x87d00280]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="2" thread="768" file="ccmgencert.cpp:3590">
<![LOG[RenewalTask: Certificate store/settings have changed, but target certificate has not.]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="768" file="regtask.cpp:2365">
And other logs are looking fine....

SCCM 2012 client installation

Hi all,
I am trying to deploy SCCM 2012 client to my office computers using client push installation wizard, however when I random check the log file on client computers, the wizard did not start at all. Anyone know why this happen?
Anyway I can trigger the installation wizard for the clients?
Regards,
Chungb

Hi Chungb,
Please install the FSP Role and mention the same.
Also are you able to access the SCCM Server share from the client machines ? Can you confirm that as well
Gautam.75801

SCCM 2012 Client.msi Fails

I am able to install the SCCM client on many machines, but two machines are failing. First I looked in ccmsetup.log:
<![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action:
ErrorMessages:
]LOG]!><time="16:25:20.476+00" date="03-16-2013" component="ccmsetup" context="" type="3" thread="1512" file="msiutil.cpp:860">
<![LOG[Next retry in 120 minute(s)...]LOG]!><time="16:25:20.507+00" date="03-16-2013" component="ccmsetup" context="" type="0" thread="1512" file="ccmsetup.cpp:7554">
Then i looked at client.msi.log for more detail, and searced for "return value 3". This log file is hug so i included an excerpt from it. Let me know where to look in the log file for more descriptive text.
[15:43:48] Automatic Delayed Start configuration is enabled for CCMEXEC
MSI (s) (70:64) [15:43:48:682]: Executing op: CustomActionSchedule(Action=CcmRegisterWinTaskRollback,ActionType=3329,Source=BinaryData,Target=CcmRegisterWinTaskRollback,)
MSI (s) (70:64) [15:43:48:697]: Executing op: ActionStart(Name=CcmRegisterWinTask,Description=Registers tasks with Windows Task Scheduler.,)
MSI (s) (70:64) [15:43:48:697]: Executing op: CustomActionSchedule(Action=CcmRegisterWinTask,ActionType=3073,Source=BinaryData,Target=CcmRegisterWinTask,)
MSI (s) (70:64) [15:43:48:697]: Creating MSIHANDLE (24379) of type 790536 for thread 1892
MSI (s) (70:10) [15:43:48:697]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI6477.tmp, Entrypoint: CcmRegisterWinTask
MSI (s) (70!24) [15:43:48:713]: Creating MSIHANDLE (24380) of type 790531 for thread 3620
MSI (s) (70!24) [15:43:48:713]: Closing MSIHANDLE (24380) of type 790531 for thread 3620
[15:43:48] Registering windows task 'Configuration Manager Idle Detection'
MSI (s) (70:10) [15:43:48:713]: Closing MSIHANDLE (24379) of type 790536 for thread 1892
CustomAction CcmRegisterWinTask returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (70:64) [15:43:48:760]: User policy value 'DisableRollback' is 0
MSI (s) (70:64) [15:43:48:760]: Machine policy value 'DisableRollback' is 0
Action ended 15:43:48: InstallFinalize. Return value 3.
MSI (s) (70:64) [15:43:48:838]: Executing op: Header(Signature=1397708873,Version=500,Timestamp=1114668398,LangId=1033,Platform=589824,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1)
MSI (s) (70:64) [15:43:48:838]: Executing op: DialogInfo(Type=0,Argument=1033)
MSI (s) (70:64) [15:43:48:838]: Executing op: DialogInfo(Type=1,Argument=Configuration Manager Client)
MSI (s) (70:64) [15:43:48:838]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back action:,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1])
MSI (s) (70:64) [15:43:48:838]: Executing op: ActionStart(Name=CcmRegisterWinTask,Description=Registers tasks with Windows Task Scheduler.,)
MSI (s) (70:64) [15:43:48:838]: Executing op: ProductInfo(ProductKey={D6804B3A-BFEC-4AB4-BFA5-FD9BECC80630},ProductName=Configuration Manager Client,PackageName=client.msi,Language=1033,Version=83893884,Assignment=1,ObsoleteArg=0,,,PackageCode={59A0EA77-D28C-4286-83A6-04BB57B9CDD6},,,InstanceType=0,LUASetting=0,RemoteURTInstalls=0,ProductDeploymentFlags=3)
MSI (s) (70:64) [15:43:48:838]: Executing op: ActionStart(Name=CcmRegisterWinTaskRollback,Description=Rolls back the changes made by CcmRegisterWinTask.,)
MSI (s) (70:64) [15:43:48:838]: Executing op: CustomActionRollback(Action=CcmRegisterWinTaskRollback,ActionType=3329,Source=BinaryData,Target=CcmRegisterWinTaskRollback,)
MSI (s) (70:64) [15:43:48:838]: Creating MSIHANDLE (24381) of type 790536 for thread 1892
MSI (s) (70:8C) [15:43:48:838]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI6504.tmp, Entrypoint: CcmRegisterWinTaskRollback
MSI (s) (70!DC) [15:43:48:853]: Creating MSIHANDLE (24382) of type 790531 for thread 3548
MSI (s) (70!DC) [15:43:48:853]: Closing MSIHANDLE (24382) of type 790531 for thread 3548
MSI (s) (70:8C) [15:43:48:853]: Closing MSIHANDLE (24381) of type 790536 for thread 1892
[15:43:48] Removing windows task 'Configuration Manager Idle Detection'
From successfully installation i typically see folders created in C:\Windows\CCM\* but in this particular case there are only a couple .tmp files and other misc. Where should i look next? I have tried ccmsetup.exe /uninstall and then ccmsetup.exe
/mp:<machine> SMSSITECODE=<code> /noservice and also with /service.
I have tried winmgmt /resetrepository
I have checked that BITS service is running.
What else should i look for?
thanks

Did someone able to find the root cause of it and able to it resolve it, i'm currently facing the same issue:
Error 1904. Module C:\Windows\CCM\DCMADQueryProvider.dll failed to register.
HRESULT -2147024703. Contact your support personnel"
This error is not
restricted to any 1 dll but it's random like DCMADQueryProvider.dll,
statusagent.dll, ccmcore.dll
•I'm getting this error while installing
SCCM 2012 client.
Steps i tried:
1.I did try manually registering
oringinally but when the client fails to install, it removes all the source
files including the ccmcore.dll. So, ccmcore.dll doesn't reside on the system
after failing to install the client or at least not that I can see.
2. I
have tried timing it just right so that my "regsvr32 ccmcore.dll" is run during
the install process while the file is in the CCM folder but that didnt work
either.
3. I had manually created the directory CCM\x64\ccmcore.dll and
copied the file from a working client and try to register but it gave me an
error " Failed to load .dll"
4. i have tried uninstalling the client from
ccmclean and tried to reinstall it but still it fails.
Currently not sure what is wrong with the client install, so still
investigating the issue, please help if someone was able to solve the issue.
There are some
articles out there which points to resolving this issue by registering
ATL.dll.
However, in this
case ATL.dll has been registered only 1 times using regsvr32.exe (system32 and
syswow64 folders).
Based on procmon :
HKCR\Wow6432Node\CLSID\{44EC053A-400F-11D0-9DCD-00A0C90391D3}\InprocServer32\
While installing, it was looking for ATL.DLL and found the location from
registry as "“%systemroot%\system32\atl.dll”

SCCM 2012 - Client Installed but No Software Center

Hi Everyone,
I've a strange problem on my Management Point.
The SCCM 2012 client is installed, but there isn't Software Center (on all other Server it has been installed).
I've tryied to install it manually & with the push installation , but no change.
when I try to push it to the server it has an error File C:\Windows\ccmsetup\{181D79D7-1115-4D96-8E9B-5833DF92FBB4}\client.msi installation failed. Error text: ExitCode: 1635
But when I try to install Manually Exit code is 0 (no error)
Cheers

Hi,
Have you checked the log files ccmsetup.log ,ccmsetup-ccmeval.log, client.msi.log and SoftwareCenterSystemTasks.log? Maybe it can give us some clues.
Technical Reference for Log Files in Configuration Manager
http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_ClientInstallLog
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 Client delpoyment in SCCM 2007 Native world

Hi Team,
In my account I have SCCM 2007 running in Native mode.... we do not support internet based clients there..but work on HTTPS only. Now I have implemented SCCM 2012 R2 there and now testing the client migration so that I can upgrade the SCCM client agent from
2007 to 2012. In SCCM 2012 we have to support internet based clients and so the SCCM 2012 client which we need to install should be compatible on internet and intranet both
The plan is to use the existing SCCM 2007 infra to do that. Send the ccmsetup.exe ( of SCCM 2012 ) in a package to all the clients via SCCM 2007 Software Distribution and trigger SCCM 2012 installation.
Just to do a small test I did this :
1. Created a folder in C drive of a client machine and copied the ccmsetup.exe ( of SCCM 2012 ) in it.
2. Tried to trigger the installation with below mentioned commandlines..... but getting error as mentioned below.... Please help.
Command line used :
Here ABCD.contoso.org is the intranet MP and PQRS.dmzone.org is internet MP
CCMSetup.exe /UsePKICert /NoCRLCheck smsmp=ABCD.contoso.org ccmhostname=PQRS.dmzone.org smssitecode=ABC
CCMSetup.exe /UsePKICert /NoCRLCheck smsmp=ABCD.contoso.org smssitecode=ABC
CCMSetup.exe smsmp=ABCD.contoso.org smssitecode=ABC
Error in ccmsetup.log
<![LOG[==========[ ccmsetup started in process 3068 ]==========]LOG]!><time="12:49:12.547+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="5076" file="ccmsetup.cpp:9441">
<![LOG[Running on platform X64]LOG]!><time="12:49:12.548+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="5076" file="util.cpp:1892">
<![LOG[Updated security on object C:\Windows\ccmsetup\cache\.]LOG]!><time="12:49:12.548+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="5076" file="ccmsetup.cpp:9285">
<![LOG[Launch from folder C:\Windows\ccmsetup\]LOG]!><time="12:49:12.548+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="5076" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1401]LOG]!><time="12:49:12.549+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="5076" file="ccmsetup.cpp:727">
<![LOG[Successfully started the ccmsetup service]LOG]!><time="12:49:12.550+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="4744" file="ccmsetup.cpp:3271">
<![LOG[Deleted file C:\Windows\ccmsetup\ccmsetup.exe.download]LOG]!><time="12:49:12.551+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="4744" file="ccmsetup.cpp:9497">
<![LOG[In ServiceMain]LOG]!><time="12:49:12.552+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmsetup.cpp:3365">
<![LOG[Folder 'MicABCoft\Configuration Manager' not found. Task does not exist.]LOG]!><time="12:49:12.556+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="4744"
file="wintask.cpp:622">
<![LOG[CcmSetup is exiting with return code 0]LOG]!><time="12:49:12.556+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="4744" file="ccmsetup.cpp:10879">
<![LOG[Running on 'MicABCoft Windows 7 Enterprise ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18]LOG]!><time="12:49:12.618+300" date="11-11-2014" component="ccmsetup" context="" type="1"
thread="3284" file="util.cpp:1974">
<![LOG[Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/UsePKICert" "/NoCRLCheck" "smssitecode=ABC"]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup"
context="" type="1" thread="3284" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context=""
type="1" thread="3284" file="ccmsetup.cpp:3775">
<![LOG[Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/UsePKICert" "/NoCRLCheck" "smssitecode=ABC"]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup"
context="" type="1" thread="3284" file="ccmsetup.cpp:3776">
<![LOG[SslState value: 448]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmsetup.cpp:4425">
<![LOG[CCMHTTPPORT: 80]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8621">
<![LOG[CCMHTTPSPORT: 443]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8636">
<![LOG[CCMHTTPSSTATE: 448]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8654">
<![LOG[CCMHTTPSCERTNAME: ]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8672">
<![LOG[FSP: ]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8724">
<![LOG[CCMFIRSTCERT: 1]LOG]!><time="12:49:12.619+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:8782">
<![LOG[HTTPS is enforced for Client. The current state is 31.]LOG]!><time="12:49:12.621+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmutillib.cpp:403">
<![LOG[Begin searching client certificates based on Certificate Issuers]LOG]!><time="12:49:12.623+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmcert.cpp:4393">
<![LOG[Completed searching client certificates based on Certificate Issuers]LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmcert.cpp:4550">
<![LOG[Begin to select client certificate]LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmcert.cpp:4706">
<![LOG[The 'Certificate Selection Criteria' was not specified, counting number of certificates present in 'MY' store of 'Local Computer'.]LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context=""
type="0" thread="3284" file="ccmcert.cpp:4742">
<![LOG[1 certificate(s) found in the 'MY' certificate store.]LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmcert.cpp:4770">
<![LOG[Only one certificate present in the certificate store.]LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmcert.cpp:4774">
<![LOG[Begin validation of Certificate [Thumbprint 50051EB74624621341900739D65706D8089A0941] issued to 'D-LJACKNVM7X64.ABClan.org']LOG]!><time="12:49:12.624+300" date="11-11-2014" component="ccmsetup" context=""
type="1" thread="3284" file="ccmcert.cpp:1662">
<![LOG[Failed to get certificate key provider information. Error 0x80092004]LOG]!><time="12:49:12.626+300" date="11-11-2014" component="ccmsetup" context="" type="3" thread="3284" file="ccmcert.cpp:1199">
<![LOG[The Certificate [Thumbprint 50051EB74624621341900739D65706D8089A0941] issued to 'D-LJACKNVM7X64.ABClan.org' has 'Client Authentication' capability.]LOG]!><time="12:49:12.633+300" date="11-11-2014" component="ccmsetup"
context="" type="0" thread="3284" file="ccmcert.cpp:582">
<![LOG[Completed validation of Certificate [Thumbprint 50051EB74624621341900739D65706D8089A0941] issued to 'D-LJACKNVM7X64.ABClan.org']LOG]!><time="12:49:12.633+300" date="11-11-2014" component="ccmsetup" context=""
type="1" thread="3284" file="ccmcert.cpp:1803">
<![LOG[>>> Client selected the PKI Certificate [Thumbprint 50051EB74624621341900739D65706D8089A0941] issued to 'D-LJACKNVM7X64.ABClan.org']LOG]!><time="12:49:12.633+300" date="11-11-2014" component="ccmsetup"
context="" type="1" thread="3284" file="ccmcert.cpp:4850">
<![LOG[Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:A5879665-7A1B-4529-827E-52FA34ABD384";
DateTime = "20141111174912.640000+000";
HRESULT = "0x00000000";
ProcessID = 3068;
ThreadID = 3284;
]LOG]!><time="12:49:12.640+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="event.cpp:715">
<![LOG[Failed to submit event to the Status Agent. Attempting to create pending event.]LOG]!><time="12:49:12.643+300" date="11-11-2014" component="ccmsetup" context="" type="2" thread="3284"
file="event.cpp:737">
<![LOG[Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:A5879665-7A1B-4529-827E-52FA34ABD384";
DateTime = "20141111174912.640000+000";
HRESULT = "0x00000000";
ProcessID = 3068;
ThreadID = 3284;
]LOG]!><time="12:49:12.643+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="event.cpp:770">
<![LOG[Successfully submitted pending event to WMI.]LOG]!><time="12:49:12.648+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="event.cpp:813">
<![LOG[CCMCERTID: MY;50051EB74624621341900739D65706D8089A0941]LOG]!><time="12:49:12.649+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmsetup.cpp:8803">
<![LOG[No MP or source location has been explicitly specified. Trying to discover a valid content location...]LOG]!><time="12:49:12.649+300" date="11-11-2014" component="ccmsetup" context="" type="1"
thread="3284" file="ccmsetup.cpp:4729">
<![LOG[Looking for MPs from AD...]LOG]!><time="12:49:12.649+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="ccmsetup.cpp:4737">
<![LOG[Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=ABC))']LOG]!><time="12:49:13.226+300" date="11-11-2014" component="ccmsetup" context="" type="0"
thread="3284" file="lsad.cpp:657">
<![LOG[OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>ABC</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=ABC</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain
Value="ABClan.org" /><Forest Value="ABCroot.org" /></ClientOperationalSettings>']LOG]!><time="12:49:13.378+300" date="11-11-2014" component="ccmsetup" context="" type="0"
thread="3284" file="lsadcache.cpp:236">
<![LOG[The MP name retrieved is 'ABCD.contoso.org' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>']LOG]!><time="12:49:13.381+300"
date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="lsadcache.cpp:334">
<![LOG[MP 'ABCD.contoso.org' is not compatible]LOG]!><time="12:49:13.382+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="lsadcache.cpp:345">
<![LOG[Retrieved 0 MP records from AD for site 'ABC']LOG]!><time="12:49:13.382+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="lsadcache.cpp:287">
<![LOG[FromAD: command line = SMSSITECODE=ABC]LOG]!><time="12:49:13.383+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="ccmsetup.cpp:288">
<![LOG[Local Machine is joined to an AD domain]LOG]!><time="12:49:13.383+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="lsad.cpp:715">
<![LOG[Current AD forest name is ABCroot.org, domain name is ABClan.org]LOG]!><time="12:49:13.386+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="lsad.cpp:843">
<![LOG[Domain joined client is in Intranet]LOG]!><time="12:49:13.386+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="lsad.cpp:1048">
<![LOG[CMPInfoFromADCache requests are throttled for 01:07:08]LOG]!><time="12:49:13.386+300" date="11-11-2014" component="ccmsetup" context="" type="0" thread="3284" file="lsadcache.cpp:173">
<![LOG[No valid source or MP locations could be identified to download content from. Ccmsetup.exe cannot continue.]LOG]!><time="12:49:13.386+300" date="11-11-2014" component="ccmsetup" context="" type="3"
thread="3284" file="ccmsetup.cpp:4806">
<![LOG[Failed to parse '"C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/UsePKICert" "/NoCRLCheck" "smssitecode=ABC"' with error 0x80004005]LOG]!><time="12:49:13.386+300" date="11-11-2014"
component="ccmsetup" context="" type="3" thread="3284" file="ccmsetup.cpp:4611">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="12:49:13.386+300" date="11-11-2014" component="ccmsetup" context="" type="1"
thread="3284" file="ccmsetup.cpp:9767">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='307' will not be sent.]LOG]!><time="12:49:13.387+300" date="11-11-2014" component="ccmsetup" context="" type="1"
thread="3284" file="ccmsetup.cpp:9767">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="12:49:13.388+300" date="11-11-2014" component="ccmsetup" context="" type="1" thread="5076" file="ccmsetup.cpp:10883">

Hi Jason,
Thanks for your reply..... I tried with /mp switch.... but same error.... if you look at the logs it says
<![LOG[MP 'ABCD.contoso.org' is not compatible]LOG]!><time="12:49:13.382+300"
date="11-11-2014" component="ccmsetup" context="" type="1" thread="3284" file="lsadcache.cpp:345">
<![LOG[Retrieved 0 MP records from AD for site 'ABC']LOG]!>
Not sure why it is saying " not compatible " ... its a valid MP..... from the same client machine below links are working fine..
http://ABCD.contoso.org/sms_mp/.sms_aut?mpcert
http://ABCD.contoso.org/sms_mp/.sms_aut?mplist
Thanks,
Sam

SCCM 2012 Client Install Failing ONLY on 8.1 Machines - Advice?

Good morning,
I've got a rather interesting situation. We have a SCCM 2012 site configured for https, the site server is acting as the MP and DP, and we are installing the client via the SCCM 2012 Client GPO. Our cert is an InCommon cert. We have 4000+
Windows 7 machines that are able to install the client. We tested on a Window 8 machine and the client install works as well. Whenever a Windows 8.1 machine tries to install it fails. We have checked the boundaries (we can't specify IP ranges
since we don't manage the whole network). I can manually browse to the source files on the MP/DP. The switches we use when installing via the GPO are /usepkicert /mp:[redacted] CCMHTTPSSTATE=63 SMSSITECODE=[redacted] SMSCACHESIZE=12288. However,
it always fails with:
<![LOG[GetDPLocations failed with error 0x80004005]LOG]!><time="09:33:26.329+300" date="03-13-2015" component="ccmsetup" context="" type="3" thread="12944" file="siteinfo.cpp:532">
<![LOG[Failed to get DP locations as the expected version from MP 'https://[redacted]'. Error 0x80004005]LOG]!><time="09:33:26.329+300" date="03-13-2015" component="ccmsetup" context="" type="2"
thread="12944" file="ccmsetup.cpp:11261">
<![LOG[Failed to find DP locations from MP 'https://[redacted]' with error 0x80004005, status code 403. Check next MP.]LOG]!><time="09:33:26.329+300" date="03-13-2015" component="ccmsetup" context="" type="2"
thread="12944" file="ccmsetup.cpp:11117">
<![LOG[Only one MP https://[redacted] is specified. Use it.]LOG]!><time="09:33:26.330+300" date="03-13-2015" component="ccmsetup" context="" type="1" thread="12944" file="ccmsetup.cpp:10080">
<![LOG[Have already tried all MPs. Couldn't find DP locations.]LOG]!><time="09:33:26.330+300" date="03-13-2015" component="ccmsetup" context="" type="3" thread="12944" file="ccmsetup.cpp:11146">
<![LOG[MapNLMCostDataToCCMCost() returning Cost 0x1]LOG]!><time="09:33:26.332+300" date="03-13-2015" component="ccmsetup" context="" type="1" thread="12944" file="ccmutillib.cpp:5479">
<![LOG[GET 'https://[redacted]/CCM_Client/ccmsetup.cab']LOG]!><time="09:33:26.333+300" date="03-13-2015" component="ccmsetup" context="" type="1" thread="12944" file="httphelper.cpp:807">
<![LOG[Failed to successfully complete WinHttp request. (StatusCode at WinHttpQueryHeaders: 403)]LOG]!><time="09:33:26.366+300" date="03-13-2015" component="ccmsetup" context="" type="3" thread="12944"
file="httphelper.cpp:1013">
<![LOG[DownloadFileByWinHTTP failed with error 0x80004005]LOG]!><time="09:33:26.366+300" date="03-13-2015" component="ccmsetup" context="" type="3" thread="12944" file="httphelper.cpp:1081">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='308' will not be sent.]LOG]!><time="09:33:26.367+300" date="03-13-2015" component="ccmsetup" context="" type="1"
thread="12944" file="ccmsetup.cpp:9763">
<![LOG['Configuration Manager Client Retry Task' is scheduled to run at 03/13/2015 02:33:26 PM (local) 03/13/2015 07:33:26 PM (UTC) time with arguments ' "/usepkicert" "/mp:[redacted]" "CCMHTTPSSTATE=63" "SMSSITECODE=AHC"
"SMSCACHESIZE=12288" /RetryWinTask:1'.]LOG]!><time="09:33:26.369+300" date="03-13-2015" component="ccmsetup" context="" type="1" thread="10100" file="wintask.cpp:315">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="09:33:26.409+300" date="03-13-2015" component="ccmsetup" context="" type="1" thread="10100" file="ccmsetup.cpp:10879">
Anyone have any idea why this is happening only on 8.1 machines? I can't think of where else to check. Thanks for any help.

Okay, so I installed via the following: ccmsetup.exe /usepkicert /source:C:\Client CCMHTTPSSTATE=63 SMSSITECODE=AHC SMSCACHESIZE=12288 and the client installed. But you're right, the CCMMessaging.log is full of https errors. I know it's
something with the cert and I've even requested new ones from the CA. However, why what is it about 8.1 that is causing the issues? Like I said, we have 4000 machines using the same client authentication cert and they work. I've cut and paste
some of the log entries. One thing to note is the \\[redacted]\sms_ahc\client\ccmsetup.exe in the beginning was using the internet FQDN. Everything else is using the intranet location. Does that provide any insight as to what is going
on?
\\[redacted]\sms_ahc\client\ccmsetup.exe /usepkicert /source:C:\Client CCMHTTPSSTATE=63 SMSSITECODE=AHC SMSCACHESIZE=12288
<![LOG[Successfully sent security settings refresh message.]LOG]!><time="12:43:12.834+300" date="03-16-2015" component="CcmMessaging" context="" type="1" thread="5452" file="ccmhttperror.cpp:369">
<![LOG[Successfully sent location services HTTPS failure message.]LOG]!><time="12:43:12.837+300" date="03-16-2015" component="CcmMessaging" context="" type="1" thread="5452" file="ccmhttperror.cpp:396">
<![LOG[Post to https://[redacted]/ccm_system_windowsauth/request failed with 0x87d00231.]LOG]!><time="12:43:12.837+300" date="03-16-2015" component="CcmMessaging" context="" type="2" thread="5452"
file="messagequeueproc_outgoing.cpp:442">
<![LOG[[CCMHTTP] ERROR: URL=https://[redacted]/ccm_system_windowsauth/request, Port=443, Options=63, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="12:45:12.880+300" date="03-16-2015" component="CcmMessaging"
context="" type="1" thread="5452" file="ccmhttperror.cpp:297">
<![LOG[Raising event:
instance of CCM_CcmHttp_Status
DateTime = "20150316174512.883000+000";
HostName = "[redacted]";
HRESULT = "0x87d0027e";
ProcessID = 8572;
StatusCode = 403;
ThreadID = 5452;
]LOG]!><time="12:45:12.883+300" date="03-16-2015" component="CcmMessaging" context="" type="1" thread="5452" file="event.cpp:715">
<![LOG[Successfully sent security settings refresh message.]LOG]!><time="12:45:12.889+300" date="03-16-2015" component="CcmMessaging" context="" type="1" thread="5452" file="ccmhttperror.cpp:369">
<![LOG[Successfully sent location services HTTPS failure message.]LOG]!><time="12:45:12.892+300" date="03-16-2015" component="CcmMessaging" context="" type="1" thread="5452" file="ccmhttperror.cpp:396">
<![LOG[Post to https://[redacted]/ccm_system_windowsauth/request failed with 0x87d00231.]LOG]!><time="12:45:12.892+300" date="03-16-2015" component="CcmMessaging" context="" type="2" thread="5452"
file="messagequeueproc_outgoing.cpp:442">

Send SCCM 2012 client or re-send client to individual computer

We have a tech tools web portal and I need to add an item so techs can send the SCCM 2012 client to a machine. This will be used if they have to reinstall the client for some reason.
I had planned to use PowerShell and created the script only to find out that it requires too great a permissions role to connect to the SCCM drive so the cmdlets can be used.
I then thought I could just create a .CCR for a computer. But, the format for SCCM 2007 does not work for SCCM 2012.
Reasons we are approaching this in this manner are:
1) We want to install using the CURRENT client files. And, we don't want to copy those off to some other location and need to remember to update them when we update SCCM 2012.
2) We want the retry capability that comes with using .CCRs.
3) We want the "smartness" of the client install we have found. We have a distributed operation and doing the client install by an SCCM admin from the PowerShell script or via the right-click in the console allows SCCM to find the closest DP and
use client install files from a local source when available.
4) We have a LOT of desktop techs that we do not want having access to the SCCM console. There is just too high a learning curve. We want a simple tool.
One other thing to mention ... we cannot use the Generate CCR tool because we are not turning on client push (lots of valid reasons for this and some the SCCM admins don't think are valid, but the decision has been made for us :) )
Anyone have thoughts on how to have a simple tool to send the client install via script or .CCR?
Thanks in advance!

You can't turn client push off -- you can turn *auto*-client push off though. The Generate CCR tool does not depend upon *auto*-client push though so there's no reason you can't use it.
Here's a blog post on the changes in the CCR process:
http://blogs.technet.com/b/neilp/archive/2012/07/03/client-push-installation-changes-in-configuration-manager-2012-and-how-to-take-advantage-of-these-for-troubleshooting-purposes.aspx
Jason | http://blog.configmgrftw.com

Deploying SCCM 2012 Client over DirectAccess

I have not been able to successfully deploy the SCCM 2012 client to any DirectAccess clients when they are not connected to the internal network. I have migrated my collections from SCCM 2007 and all machines connected internally had no issues. I
have added the new SCCM server to the Infrastructure Servers configuration on the UAG and applied the Group Policy. In the CCM logs, I am seeing "the device %computername% does not exist on the network" although I can ping them. The client push
account is a local admin on the machines so I am at a loss as to why they can't connect. Could it be boundary related?
Rich

Here is a snippet from the ccm logs:
---> The device computername.xxx.local does not exist on the network. Giving up~ $$<SMS_CLIENT_CONFIG_MANAGER><08-14-2012 05:47:23.927+300><thread=4568 (0x11D8)>
---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)~ $$<SMS_CLIENT_CONFIG_MANAGER><08-14-2012 05:47:23.927+300><thread=4568 (0x11D8)>
---> Attempting to connect to administrative share '\\computername\admin$' using account 'xxx\sccm_push'~ $$<SMS_CLIENT_CONFIG_MANAGER><08-14-2012 05:47:23.927+300><thread=4568 (0x11D8)>
---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account xxx\sccm_push (00000035) $$<SMS_CLIENT_CONFIG_MANAGER><08-14-2012 05:47:23.942+300><thread=4568 (0x11D8)>
---> The device "computername" does not exist on the network. Giving up~ $$<SMS_CLIENT_CONFIG_MANAGER><08-14-2012 05:47:23.942+300><thread=4568 (0x11D8)>
---> ERROR: Unable to access target machine for request: "2097152018", machine name: "computername", access denied or invalid network path. $$<SMS_CLIENT_CONFIG_MANAGER><08-14-2012 05:47:23.942+300><thread=4568 (0x11D8)>
Execute query exec [sp_CP_SetLastErrorCode] 2097152018, 53~ $$<SMS_CLIENT_CONFIG_MANAGER><08-14-2012 05:47:23.958+300><thread=4568 (0x11D8)>
Stored request "2097152018", machine name "computername", in queue "Retry". $$<SMS_CLIENT_CONFIG_MANAGER><08-14-2012 05:47:23.958+300><thread=4568 (0x11D8)>
Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097152018, 2~ $$<SMS_CLIENT_CONFIG_MANAGER><08-14-2012 05:47:23.958+300><thread=4568 (0x11D8)>
Execute query exec [sp_CP_SetLatest] 2097152018, N'08/14/2012 10:47:23', 198~ $$<SMS_CLIENT_CONFIG_MANAGER><08-14-2012 05:47:23.973+300><thread=4568 (0x11D8)>
<======End request: "2097152018", machine name: "computername". $$<SMS_CLIENT_CONFIG_MANAGER><08-14-2012 05:47:23.973+300><thread=4568 (0x11D8)>
---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account xxx\sccm_push (00000035) $$<SMS_CLIENT_CONFIG_MANAGER><08-14-2012 05:47:25.989+300><thread=4688 (0x1250)>

SCCM 2012 Client - missing client actions.

Hi,
I am having an issue with a SCCM 2012 client where I am only seeing the actions:
Machine Policy & Evaluation Cycle
User Policy & Evaluation Cycle.
I click on the Machine Policy Evaluation cycle and nothing happens.
What log file should I be checking to see if the other client actions are
downloaded?
Thanks,
Ward

Hi,
Any errors in these logs?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 client push occurs from site server or from distribution point?

I would like to set up client push in SCCM 2012 and I have a remote site with about 80 workstations that I would like to deploy the clients to using client push, but this remote site is VERY slow, as in less than 3Mbps slow. There is a remote DP located
at this site and I wanted to know if the remote workstations will be hammering my Site Server across the WAN (or MP I guess since the MP role is i installed on the Site Server) to request the client installation, or do the clients just request the client from
the Site Server or MP and then the client downloads to the remote DP and then the workstations install the SCCM 2012 client from the local DP at the remote site?
I just do NOT want the WAN link to become overwhelmed with workstation requests to install the client and have the Site Server have to respond to each and every workstation and download the SCCM 2012 client to each system over this slow WAN link.
How does the client push process actually work?
Thank you

The initial files will come from the primary site server. The rest (the biggest part) will come of the distribution point. See for a good read (even though it's more about secondary sites), this post of Jason:
http://blog.configmgrftw.com/secondary-sites-and-boundary-groups/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012 clients in SCCM 2007 console

Hi
If a Windows 7 system has sccm 2012 client installed, will it get discovered in SCCm 2007 console.
Regards Sushain KApoor

If you enable AD discovery to this client, the client object will be discovered. Anyway, the SCCM 2012 clients cannot be managed by SCCM 2007. See below.
Configuration Manager also checks that you have assigned the Configuration Manager 2012 client to a site that supports the Configuration Manager client version. If you have used automatic site assignment and the client is assigned to a Configuration Manager
2007 site, the client automatically tries to find a Microsoft System Center Configuration Manager 2012 site. It first checks Active Directory Domain Services and if this is not successful (for example, the Active Directory schema is not extended or the computer
is a workgroup client), the client then checks for site information from its assigned management point. However, if the client was assigned with a specific site code and assigns to a Configuration Manager 2007 site, site assignment fails and you must manually
reassign the client to a Microsoft System Center Configuration Manager 2012 site.
Juke Chou
TechNet Community Support

SCCM 2012 Client - Manual Installation Error

Similar Messages

Maybe you are looking for