Sccm 2012 client push installation error 120 & 1350

what i can do to resolve this problem a lot of client push installation skipped and get error 120 & 1305

Hi Alaa,
The problem is when you initiated your client push for these clients you forgot to force it.
The machines you are trying to deploy to already have a CCM client or a failed/corrupt installation.
You must re-initiate the client push install for the failing machines, and remember to tick off the
'Always Install the client software' option. This repairs failed/corrupt installations also.
The error code 120 tells you this way:
120 - Mobile client on the target machine has the same version, and 'forced' flag is not turned on. Not processing this CCR ,target machine already have cm client and no force install selected(always install).
1305 - is just that the client push cannot detect which version that is already installed.
All the best, Jesper Hassing - MCTS SCCM 2012 - MCSA 2012 Server - MCP

Similar Messages

SCCM 2012 Client - Manual Installation Error

Hi,
I am trying to install SCCM client manually on few of the machines that have Windows 7 OS. The installation is failing with the below error:
Failed to get client version for sending messages to FSP. Error 0x8004100e
BITS job creation failed with 80200014. Unable to check BITS version
This Operating System does not contain the correct version of BITS. BITS 2.5 or later is required.
Failed to get client version for sending messages to FSP. Error 0x8004100e
But Windows 7 comes with BITS 4.0 version. Below is the command I ran to install the client:
CCMSetup.exe /mp:<MP name> /logon SMSSITECODE=<code> FSP=<FSP name>
I even tried running with BITS priority switch:
CCMSetup.exe /mp:<MP name> /logon /BITSPriority:LOW SMSSITECODE=<code> FSP=<FSP name>
Thank you!
NM

Try installing ccmsetup manually with the parameter /BITSpriority:low:
ccmsetup.exe /BITSpriority:low
http://teacheritblog.wordpress.com/2013/08/07/configmgr-client-install-bits-error-on-windows-7-sccm/
http://social.technet.microsoft.com/Forums/en-US/2db264c9-1769-4f6b-bb77-5dcf1106fd18/sccm-2012-agent-installation-using-orchestrator
Regards, Ibrahim Hamdy

SCCM 2012 client push occurs from site server or from distribution point?

I would like to set up client push in SCCM 2012 and I have a remote site with about 80 workstations that I would like to deploy the clients to using client push, but this remote site is VERY slow, as in less than 3Mbps slow. There is a remote DP located
at this site and I wanted to know if the remote workstations will be hammering my Site Server across the WAN (or MP I guess since the MP role is i installed on the Site Server) to request the client installation, or do the clients just request the client from
the Site Server or MP and then the client downloads to the remote DP and then the workstations install the SCCM 2012 client from the local DP at the remote site?
I just do NOT want the WAN link to become overwhelmed with workstation requests to install the client and have the Site Server have to respond to each and every workstation and download the SCCM 2012 client to each system over this slow WAN link.
How does the client push process actually work?
Thank you

The initial files will come from the primary site server. The rest (the biggest part) will come of the distribution point. See for a good read (even though it's more about secondary sites), this post of Jason:
http://blog.configmgrftw.com/secondary-sites-and-boundary-groups/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Cross-forest SCCM 2012 client push

Hi all,
Hoping that you might be able to send me in the right direction either by pointing me at some existing documentation or sharing your insights.
First, we’ve got an SCCM 2012 installation running fairly well in a domain (let’s call it A), doing things like Forefront and Software Updates. Second, I’ve got another domain (B). There is a two-way trust between these domains.
We’re able to run a discovery on domain B, and show clients in SCCM, but we are not able to push the client to machines in Domain B.
We’ve added and have succeeded in publishing domain A’s SCCM management points into domain B’s AD.
So far… so good, but… now there are two scenarios:
1) When the SCCM site is configured to use PKI client certificate authentication, domain B clients cannot access resources on the domain A management point.
We’ve tried trusting Domain B’s certificate authority by importing in the CA root certificate into the Domain A management point server (local machine) certificate store for Trusted Certificate Authorities, but that doesn’t seem to work.
The following error is seen in the ccmsetup log:
Failed to get DP loations as the expected version from MP “HTTPS://servername.domain.local’. Error 0x80072f8f (I’ve the machine name)
2) When SCCM is *not* configured to use client certs, it looks like the clients try to hit the MP using a UNC path that does not exist on the MP. The error shows:
Source \\servername.domain.local\SMSClient is inaccessible (67)
The client *can* connect to the server using the UNC, however, the correct path to this server would be,
\\servername.domain.local\SMS_Site1\Client …
In the absence—or inability to find—documentation on this subject, we are pretty much guessing here on how to do this stuff.
The preference would be to get scenario 1 working so that domain B clients can access the MP, using client certs; however, if that’s not possible, we’d like to get scenario B working.
Thanks in advance for your help.
Thanks,
Kim

Hi there,
A short note on this:
In fiddling around more, I came up with a workaround. In short, I turned of the certificate authentication requirement, which (as stated above) changes the client behavior to use a UNC install path that did not exist. So I created a share with
the client files in it and granted everyone read access to it on the share and NTFS levels.
I am near sure that this is not the best way to do things, but I did get client push to work.
The problem now is that these clients are not showing up as having clients in the SCCM Management console.
Any further direction or advice on the proper way to get push install working in the environment described would be most appreciated.
Best,
Kim

SCCM 2012 Client Push Not Working

Hello,
The issue I'm having seems to be with getting the client installed on our Windows 7 64bit PC environment.
Once the client push request is sent, the client PC shows the "ccmsetup.exe *32" process running when I open task manager and look at the processes running, however after it finishes nothing is installed.
From the SCCM server I can access the
\\CLIENTPC\ADMIN$ share, so I’m sure permissions are fine.
I'm very new to getting this configured and I'm not sure why it would go this far but never actually install.
Any help in the right direction would be greatly appreciated.
Here is a copy of the ccmsetup.log from the client if it might help:
<IPAddress SubnetAddress="172.XXX.XXX.0" Address="172.XXX.XXX.6"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
']LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="0" thread="4584" file="siteinfo.cpp:96">
<![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{D3D8AA78-3B63-4E8E-92FD-43064FD1B1B3}</ID><SourceHost>CLIENTPC</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:CLIENTPC:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>HTTPS://SCCMServer01.mydomain.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-09-27T02:21:45Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1082"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="22:21:45.792+240" date="09-26-2014"
component="ccmsetup" context="" type="0" thread="4584" file="siteinfo.cpp:177">
<![LOG[CCM_POST 'HTTPS://SCCMServer01.mydomain.com/ccm_system/request']LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="1" thread="4584" file="httphelper.cpp:807">
<![LOG[Begin searching client certificates based on Certificate Issuers]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="1" thread="4584" file="ccmcert.cpp:3833">
<![LOG[Completed searching client certificates based on Certificate Issuers]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="1" thread="4584" file="ccmcert.cpp:3992">
<![LOG[Begin to select client certificate]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="1" thread="4584" file="ccmcert.cpp:4073">
<![LOG[The 'Certificate Selection Criteria' was not specified, counting number of certificates present in 'MY' store of 'Local Computer'.]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context=""
type="0" thread="4584" file="ccmcert.cpp:4109">
<![LOG[There are no certificates in the 'MY' store.]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="1" thread="4584" file="ccmcert.cpp:4131">
<![LOG[GetSSLCertificateContext failed with error 0x87d00280]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="3" thread="4584" file="ccmsetup.cpp:6025">
<![LOG[GetHttpRequestObjects failed for verb: 'CCM_POST', url: 'HTTPS://SCCMServer01.mydomain.com/ccm_system/request']LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="3"
thread="4584" file="httphelper.cpp:947">
<![LOG[GetDPLocations failed with error 0x87d00280]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="3" thread="4584" file="siteinfo.cpp:532">
<![LOG[Failed to get DP locations as the expected version from MP 'HTTPS://SCCMServer01.mydomain.com'. Error 0x87d00280]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context=""
type="2" thread="4584" file="ccmsetup.cpp:10926">
<![LOG[Failed to find DP locations from MP 'HTTPS://SCCMServer01.mydomain.com' with error 0x87d00280, status code 200. Check next MP.]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context=""
type="2" thread="4584" file="ccmsetup.cpp:10782">
<![LOG[Only one MP HTTPS://SCCMServer01.mydomain.com is specified. Use it.]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="1" thread="4584" file="ccmsetup.cpp:9745">
<![LOG[Have already tried all MPs. Couldn't find DP locations.]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="3" thread="4584" file="ccmsetup.cpp:10811">
<![LOG[GET 'HTTPS://SCCMServer01.mydomain.com/CCM_Client/ccmsetup.cab']LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="1" thread="4584" file="httphelper.cpp:807">
<![LOG[Begin searching client certificates based on Certificate Issuers]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="1" thread="4584" file="ccmcert.cpp:3833">
<![LOG[Completed searching client certificates based on Certificate Issuers]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="1" thread="4584" file="ccmcert.cpp:3992">
<![LOG[Begin to select client certificate]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="1" thread="4584" file="ccmcert.cpp:4073">
<![LOG[The 'Certificate Selection Criteria' was not specified, counting number of certificates present in 'MY' store of 'Local Computer'.]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context=""
type="0" thread="4584" file="ccmcert.cpp:4109">
<![LOG[There are no certificates in the 'MY' store.]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="1" thread="4584" file="ccmcert.cpp:4131">
<![LOG[GetSSLCertificateContext failed with error 0x87d00280]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="3" thread="4584" file="ccmsetup.cpp:6025">
<![LOG[GetHttpRequestObjects failed for verb: 'GET', url: 'HTTPS://SCCMServer01.mydomain.com/CCM_Client/ccmsetup.cab']LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="3"
thread="4584" file="httphelper.cpp:947">
<![LOG[DownloadFileByWinHTTP failed with error 0x87d00280]LOG]!><time="22:21:45.792+240" date="09-26-2014" component="ccmsetup" context="" type="3" thread="4584" file="httphelper.cpp:1081">
<![LOG[CcmSetup failed with error code 0x87d00280]LOG]!><time="22:21:45.808+240" date="09-26-2014" component="ccmsetup" context="" type="1" thread="2552" file="ccmsetup.cpp:10544">

This system is something I inherited from another system admin who set this up so I was unsure of how this was deployed. I did go in and see that it had been set to deploy using ONLY HTTPS. I have changed it to use either HTTPS or HTTP now.
Unfortunately I'm still getting the same result of ccmsetup.exe running on the client machine but it is not installing. I see in the log that I'm still getting the 0x87d00280 error, but that should matter since it is now set to use HTTPS or HTTP correct?
<IPAddress SubnetAddress="172.XXX.XXX.0" Address="172.XXX.XXX.6"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
']LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="0" thread="5032" file="siteinfo.cpp:96">
<![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{AB0BE041-48D1-4BA3-8B1C-167DB7899CF3}</ID><SourceHost>CLIENTPC</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:CLIENTPC:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>HTTPS://SCCMServer.mydomain.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-09-27T13:57:13Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1082"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="09:57:13.404+240" date="09-27-2014"
component="ccmsetup" context="" type="0" thread="5032" file="siteinfo.cpp:177">
<![LOG[CCM_POST 'HTTPS://SCCMServer.mydomain.com/ccm_system/request']LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="1" thread="5032" file="httphelper.cpp:807">
<![LOG[Begin searching client certificates based on Certificate Issuers]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="1" thread="5032" file="ccmcert.cpp:3833">
<![LOG[Completed searching client certificates based on Certificate Issuers]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="1" thread="5032" file="ccmcert.cpp:3992">
<![LOG[Begin to select client certificate]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="1" thread="5032" file="ccmcert.cpp:4073">
<![LOG[The 'Certificate Selection Criteria' was not specified, counting number of certificates present in 'MY' store of 'Local Computer'.]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context=""
type="0" thread="5032" file="ccmcert.cpp:4109">
<![LOG[There are no certificates in the 'MY' store.]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="1" thread="5032" file="ccmcert.cpp:4131">
<![LOG[GetSSLCertificateContext failed with error 0x87d00280]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="3" thread="5032" file="ccmsetup.cpp:6025">
<![LOG[GetHttpRequestObjects failed for verb: 'CCM_POST', url: 'HTTPS://SCCMServer.mydomain.com/ccm_system/request']LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="3"
thread="5032" file="httphelper.cpp:947">
<![LOG[GetDPLocations failed with error 0x87d00280]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="3" thread="5032" file="siteinfo.cpp:532">
<![LOG[Failed to get DP locations as the expected version from MP 'HTTPS://SCCMServer.mydomain.com'. Error 0x87d00280]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="2"
thread="5032" file="ccmsetup.cpp:10926">
<![LOG[Failed to find DP locations from MP 'HTTPS://SCCMServer.mydomain.com' with error 0x87d00280, status code 200. Check next MP.]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context=""
type="2" thread="5032" file="ccmsetup.cpp:10782">
<![LOG[Only one MP HTTPS://SCCMServer.mydomain.com is specified. Use it.]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="1"
thread="5032" file="ccmsetup.cpp:9745">
<![LOG[Have already tried all MPs. Couldn't find DP locations.]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="3" thread="5032" file="ccmsetup.cpp:10811">
<![LOG[GET 'HTTPS://SCCMServer.mydomain.com/CCM_Client/ccmsetup.cab']LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="1" thread="5032" file="httphelper.cpp:807">
<![LOG[Begin searching client certificates based on Certificate Issuers]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="1" thread="5032" file="ccmcert.cpp:3833">
<![LOG[Completed searching client certificates based on Certificate Issuers]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="1" thread="5032" file="ccmcert.cpp:3992">
<![LOG[Begin to select client certificate]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="1" thread="5032" file="ccmcert.cpp:4073">
<![LOG[The 'Certificate Selection Criteria' was not specified, counting number of certificates present in 'MY' store of 'Local Computer'.]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context=""
type="0" thread="5032" file="ccmcert.cpp:4109">
<![LOG[There are no certificates in the 'MY' store.]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="1" thread="5032" file="ccmcert.cpp:4131">
<![LOG[GetSSLCertificateContext failed with error 0x87d00280]LOG]!><time="09:57:13.404+240" date="09-27-2014" component="ccmsetup" context="" type="3" thread="5032" file="ccmsetup.cpp:6025">
<![LOG[GetHttpRequestObjects failed for verb: 'GET', url: 'HTTPS://SCCMServer.mydomain.com/CCM_Client/ccmsetup.cab']LOG]!><time="09:57:13.420+240" date="09-27-2014" component="ccmsetup" context="" type="3"
thread="5032" file="httphelper.cpp:947">
<![LOG[DownloadFileByWinHTTP failed with error 0x87d00280]LOG]!><time="09:57:13.420+240" date="09-27-2014" component="ccmsetup" context="" type="3" thread="5032" file="httphelper.cpp:1081">
<![LOG[CcmSetup failed with error code 0x87d00280]LOG]!><time="09:57:13.420+240" date="09-27-2014" component="ccmsetup" context="" type="1" thread="960" file="ccmsetup.cpp:10544">

SCCM 2012 Client Push Install

Hi,
I tried installing the SCCM client from the console on a workstation. The summary shows last installation error 5(Access Denied). But I am the domain admin and I used the same account to install clients on to hundreds of machines in the environment.
I can login to the machine as well and when I connect to the admin$ share on the machine remotely, I do not see the ccmsetup folder(or any other SCCM folder) being created. I verified BITS service is running, firewall is turned off, the domain admins group
is part of the local admin group.
Is there anything else to confirm? Am I missing anything? The workstation runs on Windows 7 Enterprise(64-bit) SP1.
Thank you.

Hi,
I tried installing the SCCM client from the console on a workstation. The summary shows last installation error 5(Access Denied). But I am the domain admin and I used the same account to install clients on to hundreds of machines in the environment. I
can login to the machine as well and when I connect to the admin$ share on the machine remotely, I do not see the ccmsetup folder(or any other SCCM folder) being created. I verified BITS service is running, firewall is turned off, the domain admins group is
part of the local admin group.
Is there anything else to confirm? Am I missing anything? The workstation runs on Windows 7 Enterprise(64-bit) SP1.
Thank you.
NM

SCCM 2012 client push to SCCM 2007 clients

Hi,
I'd like to upgrade SCCM 2007 clients to SCCM 2012. Their computers appear in SCCM 2012.
I could select them and then select "install client" but there are about 400 to upgrade, some or online some not.
Will the process of upgrade run when the offline clients get online?
J.
Jan Hoedt

If your clients are member of an Active Directory, you could also use a startup script to update the client.
Jason has a very popular script you can use:
http://blog.configmgrftw.com/configmgr-client-startup-script/
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

SCCM 2012 Client Installation Errors & Solutions

Hello,
Can we figure out all SCCM 2012 Client installation errors and solutions ?
Cheer's Up
Best Regard's Krishna

Hi,
Error codes are easiest looked up in CMtrace, making one general list of errors and solutions is hard, in many scenarios there are different solutions to an error based on the infrastructure and differences between environments
Error lookup in cmtrace.
http://blogs.technet.com/b/configmgrdogs/archive/2012/06/07/trace32-exe-cmtrace-exe-hidden-features.aspx
Here is a blog on troubleshooting client installations issues, it is for sccm 2007 but a lot of the content is still valid.
http://blogs.technet.com/b/sudheesn/archive/2010/05/31/troubleshooting-sccm-part-i-client-push-installation.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Best practise for installing patches for SCCM Client 2012 (Both x86 and x64)) - OSD and Client Push Installation

Hi All,
What is best practice for automatic installing of SCCM 2012 client Patches
(using Patch switch) during installation of SCCM 2012 clients? The challenge is that now there are two versions of clients and updates (x86 and x64).
I need information for:
OSD
Client Push Installation
Thank you in advance.
Regards,

Not everything that can be or is supported or not supported is documented (or ever can be):
http://technet.microsoft.com/en-us/magazine/jj643252.aspx
Your expectation here needs to be adjusted. No one recommended contacting support. William just mentioned that *if* you have an issue and needed to contact support, they may decline to help you because you've done something explicitly unsupported.
For clientpatch, here's the specific documentation noting it as unsupported:
http://blogs.technet.com/b/configmgrteam/archive/2009/04/08/automatically-applying-hotfixes-to-the-configuration-manager-2007-client-during-installation.aspx
Additionally, I've also been in contact with the sustained engineering folks responsible for the CUs and they've reinforced the statement.
What can happen? Who knows? Microsoft does not test against unsupported configurations and features -- that's the definition of unsupported. It's not tested so no one really knows. They did find a couple of explicit issues (outlined in that post above) so
know that at least those exist and probably more since it is, as mentioned, abandoned code.
Why does it matter what can happen though? If the folks who write and support the code tell you shouldn't do it, you are simply asking for problems by doing it. Ultimately, you're asking a question that has no defined answer (except "bad"/unsupported things)
that really doesn't matter if you follow the explicit guidance. If you don't, as William points out, that's a risk for you take and an answer for you to discover.
Jason | http://blog.configmgrftw.com

SCCM Client Push Installation Wizard does not install the client. CCMSetup folder - not created

Hello,
I have tried running the Client Push wizard for a single computer or a pilot collection of 8 computers, the result is always
the same - no SCCM client is installed on any computer.
The computers are running 32-bit Windows XP SP2.
The Windows firewall is disabled.
The client push installation account is setup and have domain admin and local admin privileges. Client Push automatic method
is not enabled.
The domain is AD WIndows 2000.
The SCCM server is running Windows 2003 R2 SP2 64bit Standard.
The AD schema has been extended.
MP, and SLP are installed and published. (MP is published in DNS as well.)
FSP is installed.
MP, SLP and FSP are running on the same server.
SQL 2005 server is running locally.
System management container is created and all rights and permissions delegated.
With the Push installation account I can access C$ share on the client computer from the SCCM server.
RPC, Remote registry, WMI services are running on the client machines.
All prerequisites are installed from the client folder on SCCM server- latest BITS 2.5, Windows installer 3.1 and MSXML6.
All computers are in the same IP subnet which is listed in the boundaries.
Yet, the client is not being installed.
No CCMSetup folder is created on the client machines in Windows\System32 folder, so it is really difficult to troubleshoot
what the is the issue. I do not see anything helpful in the ccm.log on the server.
I have tried running the CCMSetup.exe manually on one of the workstations and that was successful and reported back to the
SCCM server / console.
What else I should check / try? I really want to push agents via the wizard.
Thank you,
Peter

Hi Wally,
I have changed 2 things:
1. Enabed automatic push installation (so I am not usign the wizard any more)
2. Changed the IP subnet to IP ranges in the site boundairies.
After runnignt the discovery, I was able to see some activities in the ccm.log. A ccmsetup folder is now created but the agent is still not instaleld. Here is the ccmsetup.log
==================================
<![LOG[==========[ ccmsetup started in process 3140 ]==========]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:8853">
<![LOG[Version: 4.0.5931.0000]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:1913">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:3937">
<![LOG[Command line: "C:\WINDOWS\system32\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:3946">
<![LOG[CCMHTTPPORT:    80]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7851">
<![LOG[CCMHTTPSPORT:    443]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7866">
<![LOG[CCMHTTPSSTATE:    0]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7884">
<![LOG[CCMHTTPSCERTNAME:    ]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7912">
<![LOG[FSP:    HFXDBSSOM.CORP.EASTLINK.CA]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7927">
<![LOG[CCMFIRSTCERT:    0]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7969">
<![LOG[Config file:      C:\WINDOWS\system32\ccmsetup\MobileClient.tcf]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4341">
<![LOG[Retry time:       10 minute(s)]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4342">
<![LOG[MSI log file:     ]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4343">
<![LOG[MSI properties:    INSTALL="ALL" SMSSITECODE="PHX" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="0" FSP="HFXDBSSOM.CORP.EASTLINK.CA" CCMFIRSTCERT="0"]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4344">
<![LOG[Source List:]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4352">
<![LOG[                  \\HFXDBSSOM.corp.eastlink.ca\SMSClient]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4359">
<![LOG[                  \\HFXDBSSOM\SMSClient]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4368">
<![LOG[MPs:]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4371">
<![LOG[                  HFXDBSSOM.corp.eastlink.ca]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4386">
<![LOG[Updated security on object C:\WINDOWS\system32\ccmsetup\.]LOG]!><time="09:45:07.076+240" date="12-06-2007" component="ccmsetup" context="" type="0" thread="3108" file="ccmsetup.cpp:8692">
<![LOG[Sending Fallback Status Point message, STATEID='100'.]LOG]!><time="09:45:07.076+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:9169">
<![LOG[State message with TopicType 800 and TopicId {A450B407-619B-4777-B77E-C3352753B58A} has been sent to the FSP]LOG]!><time="09:45:07.326+240" date="12-06-2007" component="FSPStateMessage" context="" type="1" thread="3108" file="fsputillib.cpp:730">
<![LOG[Running as user "SYSTEM"]LOG]!><time="09:45:07.326+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:2534">
<![LOG[Detected 24292 MB free disk space on system drive.]LOG]!><time="09:45:07.326+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:465">
<![LOG[DetectWindowsEmbeddedFBWF() Detecting OS Version]LOG]!><time="09:45:07.342+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:511">
<![LOG[Client OS is not Windows XP Embedded]LOG]!><time="09:45:07.342+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:548">
<![LOG[Successfully ran BITS check.]LOG]!><time="09:45:08.745+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:6948">
<![LOG[Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 401)]LOG]!><time="09:45:08.745+240" date="12-06-2007" component="ccmsetup" context="" type="3" thread="2600" file="ccmsetup.cpp:5813">
<![LOG[Sending Fallback Status Point message, STATEID='308'.]LOG]!><time="09:45:08.760+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:9169">
<![LOG[State message with TopicType 800 and TopicId {3BFABF82-FB74-43FB-8A4A-6DFDEAEAC25C} has been sent to the FSP]LOG]!><time="09:45:08.776+240" date="12-06-2007" component="FSPStateMessage" context="" type="1" thread="2600" file="fsputillib.cpp:730">
==============================================================
There are two red errors I am concerned about:
"Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 401)
and
"Failed to download 'WindwosXP-KB923845-x86-ENU.exe' from http://HFXDBSSOM.corp.eastlink.ca/CCM_Client/i386/BITS25 with error code 0x80004005).
What should I do to resolve these errors?
Thanks,
Peter

SCCM 2012 client installation

Hi all,
I am trying to deploy SCCM 2012 client to my office computers using client push installation wizard, however when I random check the log file on client computers, the wizard did not start at all. Anyone know why this happen?
Anyway I can trigger the installation wizard for the clients?
Regards,
Chungb

Hi Chungb,
Please install the FSP Role and mention the same.
Also are you able to access the SCCM Server share from the client machines ? Can you confirm that as well
Gautam.75801

SCCM 2012 client installation not happening

Hi,
I'm having issues while installing SCCM 2012 client on "Microsoftr Windows Serverr 2008 Standard SP-1"
I have tried manual install and uninstall also several time. And all the revelent services are also working fine
and I'm having below issue:
Some tabs are missing:
CCM Notification Agent is disabled.

Here are the attached log files.
This is CCMSetup.log
<![LOG[MSI: Action 10:22:51: SmsSetLUAAccessPermissions. >Gets permission for evelation on Vista and grants each COM object permission.]LOG]!><time="10:22:51.744-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:22:51: Ngen. Calling NGEN.exe]LOG]!><time="10:22:51.760-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:12: InstallServices. Installing new services]LOG]!><time="10:23:12.445-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: WriteEnvironmentStrings. Updating environment strings]LOG]!><time="10:23:13.116-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmSetServiceConfig. Sets WMI ServiceRootDir and configures CCMEXEC service.]LOG]!><time="10:23:13.116-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmRegisterWinTaskRollback. Rolls back the changes made by CcmRegisterWinTask.]LOG]!><time="10:23:13.381-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmRegisterWinTask. Registers tasks with Windows Task Scheduler.]LOG]!><time="10:23:13.397-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmRollbackEvalTask. Rollback the creattion of Configuration Manager Client evaluation tasks.]LOG]!><time="10:23:13.412-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmCreateEvalTask. Create Configuration Manager Client evaluation tasks.]LOG]!><time="10:23:13.428-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: SmsMigrateInventory. Migrating SMS Legacy Client inventory settings]LOG]!><time="10:23:13.631-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmEnableAppVIntegration. Enable Configuration Manager Client integration with App-V.]LOG]!><time="10:23:13.631-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmConfigDCOM. Configures registry key permissions for the DCOM Components passed from CcmConfigDCOMInit.]LOG]!><time="10:23:13.662-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: SmsShellNotify. Notifies the shell for the file-association icon changes.]LOG]!><time="10:23:13.693-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: SmsSetClientConfig. Applies the configuration placed by SmsSetClientConfigInit and configures client framework.]LOG]!><time="10:23:13.709-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:13: CcmInitializePolicy. Sets and initializes default policy.]LOG]!><time="10:23:13.724-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:16: CcmRegisterWFGina. Registers Write Filter Gina.]LOG]!><time="10:23:16.283-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:16: CcmRegisterWFGinaRollback. Rolls back the changes made by CcmRegisterWFGina.]LOG]!><time="10:23:16.298-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:16: CcmClearServiceSetupStamp. Clear the time stamp for blocking the ccmexec service from starting up during upgrade.]LOG]!><time="10:23:16.314-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:16: CcmRegisterProduct. If product is registered in MSI database, then product is registered with WMI.]LOG]!><time="10:23:16.329-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:16: CcmRegisterProductRollback. Calls CcmUnregisterProduct. Deletes the instance from the WMI in the Configuration Manager namespace using the ProductCode instance in the session.]LOG]!><time="10:23:16.345-120" date="07-01-2014"
component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:16: SmsInstallPrepDrvr. Installing Software Metering PREP Driver]LOG]!><time="10:23:16.345-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:16: StartServices. Starting services]LOG]!><time="10:23:16.439-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:17: CcmStartService. Starts the ccmexec service.]LOG]!><time="10:23:17.484-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:17: SmsCleanupDesktopMigrationInfo. Deletes backed up information on the disk.]LOG]!><time="10:23:17.499-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:17: SmsClientInstallSucceeded. Sends a wmi event to indicate client installation succeeded.]LOG]!><time="10:23:17.499-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:17: InstallFinalize. ]LOG]!><time="10:23:17.515-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:17: RollbackCleanup. Removing backup files]LOG]!><time="10:23:17.655-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[MSI: Action 10:23:17: RemoveExistingProducts. Removing applications]LOG]!><time="10:23:17.687-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="msiutil.cpp:314">
<![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation succeeded.]LOG]!><time="10:23:17.827-120" date="07-01-2014" component="ccmsetup" context="" type="1" thread="3556" file="msiutil.cpp:831">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='400' will not be sent.]LOG]!><time="10:23:17.827-120" date="07-01-2014" component="ccmsetup" context="" type="1" thread="3556" file="ccmsetup.cpp:9428">
<![LOG[Deleted file C:\Windows\ccmsetup\ccmsetup.xml]LOG]!><time="10:23:17.827-120" date="07-01-2014" component="ccmsetup" context="" type="1" thread="3556" file="ccmsetup.cpp:9156">
<![LOG[Task 'Configuration Manager Client Upgrade Task' does not exist]LOG]!><time="10:23:17.843-120" date="07-01-2014" component="ccmsetup" context="" type="0" thread="3556" file="wintask.cpp:571">
<![LOG[CcmSetup is exiting with return code 0]LOG]!><time="10:23:17.843-120" date="07-01-2014" component="ccmsetup" context="" type="1" thread="3556" file="ccmsetup.cpp:10540">
Here is Clientidmanagerstartup.log:
<![LOG['RDV' Identity store does not support backup.]LOG]!><time="10:26:18.985-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="3336" file="ccmidstore.cpp:372">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SMS_RemoteClient_Reassigned
ClientID = "GUID:523B833D-AB79-4DBC-B026-F01F1549ED3F";
DateTime = "20140701082618.985000+000";
LastAssignedSite = "";
MachineName = "KIEVM-XENE01";
NewAssignedSite = "EME";
ProcessID = 3652;
SiteCode = "EME";
ThreadID = 3336;
]LOG]!><time="10:26:19.001-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="3336" file="event.cpp:706">
<![LOG[Read SMBIOS (encoded): 56004D0077006100720065002D00340032002000320062002000300065002000610035002000300031002000310033002000360030002000300034002D0061003000200031006400200062003900200032003800200061003500200063006200200066003100200034006300]LOG]!><time="10:26:19.266-120"
date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="smbiosident.cpp:118">
<![LOG[Evaluated SMBIOS (encoded): 56004D0077006100720065002D00340032002000320062002000300065002000610035002000300031002000310033002000360030002000300034002D0061003000200031006400200062003900200032003800200061003500200063006200200066003100200034006300]LOG]!><time="10:26:19.266-120"
date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="smbiosident.cpp:184">
<![LOG[No SMBIOS Changed]LOG]!><time="10:26:19.266-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="smbiosident.cpp:65">
<![LOG[SMBIOS unchanged]LOG]!><time="10:26:19.266-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="ccmid.cpp:671">
<![LOG[SID unchanged]LOG]!><time="10:26:19.266-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="ccmid.cpp:688">
<![LOG[HWID unchanged]LOG]!><time="10:26:19.266-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="ccmid.cpp:705">
<![LOG[GetSystemEnclosureChassisInfo: IsFixed=FALSE, IsLaptop=FALSE]LOG]!><time="10:26:19.281-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="ccmid.cpp:215">
<![LOG[Windows To Go requires a minimum operating system of Windows 8]LOG]!><time="10:26:19.297-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="util.cpp:2902">
<![LOG[Computed HardwareID=2:235672F0CA7CA27255D20470050155D4B91872C8
Win32_SystemEnclosure.SerialNumber=<empty>
Win32_SystemEnclosure.SMBIOSAssetTag=<empty>
Win32_BaseBoard.SerialNumber=None
Win32_BIOS.SerialNumber=VMware-42 2b 0e a5 01 13 60 04-a0 1d b9 28 a5 cb f1 4c
Win32_NetworkAdapterConfiguration.MACAddress=00:50:56:AB:6A:BB]LOG]!><time="10:26:19.297-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="ccmid.cpp:476">
<![LOG[Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:235672F0CA7CA27255D20470050155D4B91872C8
HardwareID2=B332A505010000FA]LOG]!><time="10:26:19.297-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="2104" file="ccmid.cpp:575">
<![LOG[RenewalTask: Executing renewal task.]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="768" file="regtask.cpp:2335">
<![LOG[Begin searching client certificates based on Certificate Issuers]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="768" file="ccmcert.cpp:3833">
<![LOG[Completed searching client certificates based on Certificate Issuers]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="768" file="ccmcert.cpp:3992">
<![LOG[Begin to select client certificate]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="768" file="ccmcert.cpp:4073">
<![LOG[There are no certificates in the 'MY' store.]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="768" file="ccmcert.cpp:4131">
<![LOG[Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:523B833D-AB79-4DBC-B026-F01F1549ED3F";
DateTime = "20140701082640.481000+000";
HRESULT = "0x87d00280";
ProcessID = 3652;
ThreadID = 768;
]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="768" file="event.cpp:706">
<![LOG[Unable to find PKI Certificate matching SCCM certificate selection criteria. 0x87d00280]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="2" thread="768" file="ccmgencert.cpp:3590">
<![LOG[RenewalTask: Certificate store/settings have changed, but target certificate has not.]LOG]!><time="10:26:40.481-120" date="07-01-2014" component="ClientIDManagerStartup" context="" type="1" thread="768" file="regtask.cpp:2365">
And other logs are looking fine....

Error installing SCCM 2012 client on server

Hi Guys,
I am trying to install the SCCM 2012 client on a machine in my domain. The account specified in client settings is indeed a local admin on this server, but I get the error below:
Any assistance much appreciated!

Hi GSS1,
You can check on the C:\Windows\ccmsetup\logs , files: ccmsetup.log and client.msi.log for errors of clues about the real failure.
On the other hand I would recommend you the manual installation from the UNC path, like:
\\SCCMServerName\SMS_sitecode\Client\ccmsetup.exe
and using the parameters listed here to define the settings: https://technet.microsoft.com/en-us/library/bb693546.aspx?f=255&MSPPError=-2147217396
Optionally you can copy the files from the \\...\Client\ folder to local and try a local installation.
Any of this steps will give you more clues about the failure if they fail or success.
Please share any update for more suggestions!

Sccm client push installation problem

in my company 22000 users and install sccm 2012(1 primary site in main dc and 4 site system server in branch )
i enable automatic site-wide client push installation . only sccm client installed in 11000 computers during 7 month and increment installation it very slowly 2-10 per month
how i install svvm client in another computers automaticly
please help me

Yes. You can also manually create boundaries. Each client must fall under a boundary (eg IP Subnet, IP Range, AD site). You need to check that all are covered. Boundaries have to be added to boundary groups which are configured for site assignment.
http://www.gerryhampsoncm.blogspot.ie/2013/02/sccm-2012-sp1-step-by-step-guide-part-6.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM 2007 Client Push Error - CCM.log

Guys,
CLinet push is not working on our SCCM 2007 server. Below is the error message from CCM.log
~ ERROR: Failed to connect to the \\\admin$ share using account 'Machine Account' SMS_CLIENT_CONFIG_MANAGER 2/21/2014 5:01:25 PM 1716 (0x06B4)
I am not sure why admin share is \\\admin$. Please help.

May be you have not set Access Account in
Client Push Installation Properties.
Please Visit the below link for better understanding of Client Push Installation.
http://technet.microsoft.com/en-us/library/bb632380.aspx
-Ashu

Sccm 2012 client push installation error 120 & 1350

Similar Messages

Maybe you are looking for