SCCM 2012 Deploy --- Error = The software change returned error code 0x87D00324(-2016410844).
Deployment to the client is successful but the error reported within Clients "SCCM Software Center"
The software change returned error code 0x87D00324(-2016410844).
Also States on "Status" Past Due - Will be Retired"
Can't figure this one out and I did some googling with no success in finding a solution?
I am running an Adobe Flash install (.EXE)
Any help or direction would be greatly appreciated
RF
Hi,
Thank you for your response
""Wow6432Node is not valid on x86 systems."""
Yes, that I am aware of that.....Windows on Windows, for running x86 apps on x64 Windows<o:p></o:p>
When I first created the detection method I had only created the "WoW" Check
for Flash value in the reg, which was running against both x86 & x64 Win 7
systems, and forgot to include the x64 check/, either case, the error appeared
on the WOW check. Presently I have 2 "Detection Clauses" one for x86
and the second clause is x64 ( non WOW Path), and still receive the same erorrs
on both x86 & x64 systems. ( and x64 system have both reg entries since Win 7 has both x86 & x64 versions of IE)
Looking at the registry of an x64 Win 7 system I find the Adobe Flash registry entry is
located in both Wow6432Node and also in the x64 sections of the reg.....<o:p></o:p>
""""Also, why use the default value? I doubt there's anything in there (the default value is the
value display in a key in regedit with the name of
"@").""""<o:p></o:p>
When Default Value is selected the boxes/options below that allow for more detailed
information to be entered when performing the "reg check"? This is
where I had been able to enter specific Build/Version to look for, Flash
11.4.402.265, so that if it does not discover the build # it will proceed with
the install.....<o:p></o:p>
I figured having the option to check for Build/Version # would omit SCCM reinstalling on
systems that have build 11.4.402.265 already?<o:p></o:p>
From what I understand is that Adobe Flash x64 installs both versions x86 & x64 since Win 7 has both IE
x86 & IE x64 bit versions by default, and this would explain the Wow6432Node reg
entries and the true x64 reg entries in both locations when installing.
Overall, I am thinking I may be heading in the wrong direction in resolving this, as x86 & x64 versions install on the systems, so this tells me it is detecting when / what needs to be installed, the issue seems to be how it reports back after installing......
Looking further, I view the Content Status Page, and there reporting info in Asset Detail under [Success] all others { / In Progresss / Error /Unknown } has no info......
If this helps provide further details.....
Thanks
Regards,
Ron
RF
Similar Messages
-
The software change returned error code 0x87D00607(-2016410105).
Hi to everyone. I am learning SCCM 2012 R2 using book Mastering SCCM 2012 R2 in addition to various video trainings and online resources. Currently I am focused on application deployment. I created Foxit Reader application - msi deployment type, distributed
it to DP and deployed it to device collection containing only one test computer (Win 7 Pro SP1 x64). Having done all these steps I went to client's Software Center and Application Catalog. Foxit Reader app is visible but as soon as I click on Install
button I receive an error:
The software change returned error code 0x87D00607(-2016410105).
I deployed Office 2013 a few days ago (although I am struggling to uninstall it silently) without problems. Meanwhile I did not change anything related to boundaries, boundary groups and DPs. I have only one SCCM 2012 R2 server (Primary stand-alone site).
I hate these situations when I follow along some official learning material such as this book, doing everything the same as it is done there and it does not work at all.
Unfortunately I can not afford official MS training, my company does not invest in their system engineers so we are on our own. It is nice to learn something by yourself but situations like this take too much time - probably on official training it would be
solved immediately.Its likely that your problem is being caused by incorrectly configured boundaries with Configuration Manager. There are quite a few blogs on this particular error, as an example:
http://www.vmadmin.co.uk/microsoft/64-mssystemcenter/350-sccm2012errorboundary87d00607
and
http://peerk.blogspot.com.au/2013/01/sccm-2012-app-stuck-at-downloading-0.html
or
http://heineborn.com/tech/application-installation-error-0x87d00607/
Take a look at your boundaries and make sure that you have one configured relative to the location of the Distribution Point that the client is trying to download content from.
Cheers
Damon -
The software change returned error code 0x87D0128F (-2016406897)
Hi all,
We are currently using Admin Studio 2013 to create App-V applications (which in turn uses the Microsoft App-V 5.0 Sequencer running through AAC). I have noticed that the last few applications that have been sequenced, when deployed via SCCM 2012 have
the following error:
The software change returned error code 0x87D0128F (-2016406897)
Now, we have tested these applications on a vanilla Windows 7 SP1 OS using the AppVLauncher and the application launches as expected. The issue seems to be with the app deployment. I have read a couple of articles about this (slim picking) and
one suggested the shortcut could have an extra space at the start. This is not the case for my apps. Also the other suggestion is changing the Enable Scripting registry key, but again this did not work.
Has anyone else seen this problem and have a solution?
TaThanks for replying Torsten,
This is the error log I get. Not quite sure how to diagnose the issue:
+ CategoryInfo : InvalidResult: (:) [Add-AppvClientPackage], Clie
ntException
+ FullyQualifiedErrorId : ConfigurePackageError,Microsoft.AppV.AppvClientP
owerShell.AddAppvPackage
]LOG]!><time="16:16:49.418+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appexcnlib.cpp:441">
<![LOG[AppV command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage -Path 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv'
-DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml'] failed with return code 1.]LOG]!><time="16:16:49.419+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appvcommandutil.cpp:128">
<![LOG[AppVCommandUtil::RunAppVCommand() failed. (0x87d0128f)]LOG]!><time="16:16:49.420+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appvcommandutil.cpp:154">
<![LOG[AppVManageClient5X::InstallAppVPackage() failed. (0x87d0128f)]LOG]!><time="16:16:49.421+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appvmanage5x.cpp:86">
<![LOG[ CAppV5XHandler::InstallApp() failed. (0x87d0128f)]LOG]!><time="16:16:49.422+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appv5xhandler.cpp:646">
<![LOG[++++++ App enforcement completed (5 seconds) for App DT "00031_SolidWorks_eDrawings_2014_EN_R01" [ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e], Revision: 1, User SID: ] ++++++]LOG]!><time="16:16:49.427+00"
date="11-19-2013" component="AppEnforce" context="" type="1" thread="2532" file="appprovider.cpp:2366">
<![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="17:10:13.543+00" date="11-19-2013" component="AppEnforce" context="" type="1" thread="4828" file="appvpackagequery5x.cpp:177">
<![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:36.192+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvpackagequery5x.cpp:177">
<![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:36.259+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvpackagequery5x.cpp:177">
<![LOG[+++ Starting Install enforcement for App DT "00031_SolidWorks_eDrawings_2014_EN_R01" ApplicationDeliveryType - ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e, Revision - 1, ContentPath - C:\WINDOWS\ccmcache\y,
Execution Context - Any]LOG]!><time="10:46:37.834+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:1643">
<![LOG[ A user is logged on to the system.]LOG]!><time="10:46:37.916+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:2014">
<![LOG[ Performing detection of app deployment type 00031_SolidWorks_eDrawings_2014_EN_R01(ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e, revision 1) for system.]LOG]!><time="10:46:37.927+00"
date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:2079">
<![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:38.236+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2280" file="appvpackagequery5x.cpp:177">
<![LOG[ Installing App-V 5.X package 00031_SolidWorks_eDrawings_2014_EN_R01 (DTId = ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e, Revision = 1)]LOG]!><time="10:46:38.245+00" date="11-20-2013"
component="AppEnforce" context="" type="1" thread="2500" file="appv5xhandler.cpp:422">
<![LOG[Running App-V command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Get-AppVPublishingServer | Remove-AppVPublishingServer
] for the machine]LOG]!><time="10:46:38.246+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvcommandutil.cpp:117">
<![LOG[ Executing Command line: "C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Get-AppVPublishingServer
| Remove-AppVPublishingServer with system context]LOG]!><time="10:46:38.247+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:345">
<![LOG[ Process 4356 terminated with exitcode: 0]LOG]!><time="10:46:43.218+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:431">
<![LOG[The AppV 5X client is configured for use with ConfigMgr.]LOG]!><time="10:46:43.219+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvclientconfig5x.cpp:64">
<![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:43.245+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvpackagequery5x.cpp:177">
<![LOG[Package: 00031_SolidWorks_eDrawings_2014_EN_R01 with version GUID {7013821C-844B-46E4-B3DB-380B65BF93CF} is not installed. Will install it]LOG]!><time="10:46:43.246+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500"
file="appv5xhandler.cpp:459">
<![LOG[Configure the package 00031_SolidWorks_eDrawings_2014_EN_R01 as download and execute]LOG]!><time="10:46:43.249+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appv5xhandler.cpp:468">
<![LOG[Running App-V command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage -Path
'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv' -DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml'] for the machine]LOG]!><time="10:46:43.255+00" date="11-20-2013"
component="AppEnforce" context="" type="1" thread="2500" file="appvcommandutil.cpp:117">
<![LOG[ Executing Command line: "C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage
-Path 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv' -DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml' with system context]LOG]!><time="10:46:43.256+00" date="11-20-2013"
component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:345">
<![LOG[ Process 4120 terminated with exitcode: 1]LOG]!><time="10:46:45.438+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:431">
<![LOG[Here is the error message generated by the process:
Add-AppvClientPackage : XML document could not be loaded because it is
invalid. Please supply a valid XML document. Please consult AppV Client Event
Log for more details.
Operation attempted: Configure AppV Package.
AppV Error Code: 050009000A.
Please consult AppV Client Event Log for more details.
At line:1 char:106
+ import-module 'C:\Program Files\Microsoft Application
Virtualization\Client\Appv ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidResult: (:) [Add-AppvClientPackage], Clie
ntException
+ FullyQualifiedErrorId : ConfigurePackageError,Microsoft.AppV.AppvClientP
owerShell.AddAppvPackage
]LOG]!><time="10:46:45.442+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appexcnlib.cpp:441">
<![LOG[AppV command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage -Path 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv'
-DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml'] failed with return code 1.]LOG]!><time="10:46:45.443+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appvcommandutil.cpp:128">
<![LOG[AppVCommandUtil::RunAppVCommand() failed. (0x87d0128f)]LOG]!><time="10:46:45.444+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appvcommandutil.cpp:154">
<![LOG[AppVManageClient5X::InstallAppVPackage() failed. (0x87d0128f)]LOG]!><time="10:46:45.445+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appvmanage5x.cpp:86">
<![LOG[ CAppV5XHandler::InstallApp() failed. (0x87d0128f)]LOG]!><time="10:46:45.446+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appv5xhandler.cpp:646">
<![LOG[++++++ App enforcement completed (7 seconds) for App DT "00031_SolidWorks_eDrawings_2014_EN_R01" [ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e], Revision: 1, User SID: ] ++++++]LOG]!><time="10:46:45.450+00"
date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:2366">
Just to add to this I have also managed to install the application from the downloaded content from SCCM. By that I mean I go into the cached folder and run the app-v launcher, load and install the application and it works correctly. Therefore
it must be something to do with the launch command through SCCM? -
I have rolled out bunch of updates across few hundred workstation systems.
Few of the desktops have failed to install SOME of the updates and just can't get my head around as to why?
Looking at one of the workstations, I can see 5 updates are pending download at 0%.
Some of these fail after a while and with in Software Centre, I can see 'Help with updates - The software change returned error code 0x87D00215(-2016411115).'. Not exactly sure what this means, but I have tried clearing the cache and
rebooting the workstations few times.
(I have also tried to use Windows Update and install one of these manually, which worked.)Investigating this further, I have found the following in CAS.log:
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {ED6E9E5C-E806-43CA-9F93-49AC72D1DEAD} for content 53bf87a2-bedf-4def-b0ec-9637613c3429.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting locations synchronously for content 99ddb078-b780-4605-8fac-9607fe56450d.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/99ddb078-b780-4605-8fac-9607fe56450d', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting content 99ddb078-b780-4605-8fac-9607fe56450d.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {67B7E59B-A386-4EA8-BF39-2EB64B108A6C} for content 99ddb078-b780-4605-8fac-9607fe56450d.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting locations synchronously for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/61d33de7-9582-41e3-82fc-3e0f970b60f3', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {12E48136-B545-4C42-9745-9FF97CE38D52} for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4) -
Failed software update returns error code 0x87D00668
We are using Secunia CSI to create and publish 3rd party software update packages to SCCM 2012. I have one client computer running Windows 7 Pro x64 that is having a problem with one update. When the user tries to install the Adobe Reader update
in Software Center it fails and returns the following error.
The software change returned error code 0x87D00668(-2016410008).
I haven't been able to find any information on this error code. I was just wondering if anyone else has encountered this error and might have any information on it??The item it's referring to in that error would seem to be the task that can't be found. No?
The issue that needs to be addressed is that the updates aren't needed - they are installed on the server. I've installed the updates manually, rebooted, Software Center should not even be reporting that the updates need to be installed. And back to
the second post above, "Software update still detected as actionable after being applied" seems to be saying that it DOES see that the patch is installed. The question is then, why is it still "actionable"?
Thanks
Why do you think that they are not needed? Have you force CM to scan again for SU? Are they show as being applied in CM12? What does the Windowsupdate.log say about that SU?
I don't think it is a task that can't be found based on that single line from the log file.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ
I don't think the updates are needed because they are installed on the server. You will see in my above posts my reasoning for concluding that the updates are installed: "I have two security updates that are indeed installed (according to Windows Update,
the Windows Update log, and Add/remove programs), yet Software Center shows "failed" and with that exact same error of "Software update still detected as actionable after being applied".
Yes, I've forced multiple rescans (before and after reinstalling the client) over the course of a few days. Software Center still shows failed.
The Windows update log shows that it installed successfully. Here's one of lines in the log for one of the updates (in fact as far as the log goes back, 7-3, it's been saying this):
WindowsUpdate Success Content Install Installation Successful: Windows successfully installed the following update: Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows
XP x86 (KB2729450)
I think, again, we're back to the fact that is is installed but the issue is: "Software update still detected as actionable after being applied" seems to be saying that it DOES see that the patch is installed. The question is why is it still
"actionable"? The client sees that it's installed but ... why is it saying it's still "actionable"?
I realize that this issue might be a little tougher to track down since I couldn't find ANY other reference to it online.
Lastly, Config Manager shows "failed to install update" which is exactly what Software Center reports.
Thanks again, am happy to upload/copy/paste any logs you think would be helpful. -
Hello everybody,
I have a huge database over windows 2003 server and sql server 2008 r2, all of them with all update, no firewall, no antivirus, no any server feature/role installed.
Over the last 2 months I suddently start getting the following error:
The operating system returned error 21(failed to retrieve text for this error. Reason: 15105) to SQL Server during a read at offset 0x000000000da000 in file 'S:\TempDB\tempdb.mdf'. Additional
messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB).
This error can be caused by many factors; for more information, see SQL Server Books Online.
I have the TEMP database split over 5 partitions on 5 different SAN disk. beggining size of each partition fix to 20 GB with autogrow 10%. Single Instance, around 15 DB.
The space on each hard disk does not reach 60%.
I got the above error when all temp files reach 27 GB approx.
I already ran a check disk, checkDB and everything says no error found, but I still got same error.
Does anyone know what could cause something like this?
note, when getting the above error, the only way to fix it, because I cannot do any select on any DB is to restart the service, so each temp file start again at 20 GB and everythign seems to be fine until reach the size again.
Gilberto H.The operating system returned error 21(failed to retrieve text for this error. Reason: 15105
Hello Gilberto,
See System Error Codes (0-499) for error code 21:
ERROR_NOT_READY
21 (0x15)
The device is not ready.
Could be an issue with your storage system
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Getting "Error: 0x80070654" when trying to install SCCM 2012 R2 Console from Software Center
What I did:
Created a Package Source share on the Site Server
Gave the Package Source Share the following Share permissions: SCCM Admins: Full Control, Domain Computers: Full Control, Local Admins: Full Control.
Copied the "Program Files\Microsoft Configuration Manager\tools\ConsoleSetup" folder to my package source (Since the Package Source is actually on the site server, I just copied the ConsoleSetup folder to it that is on the same drive)
Created a package and a Standard Program
Command line: ConsoleSetup.exe
I deploy it to my collection
Run Machine Policy and Reevaluation on my Right Click Tools
Go to one of my clients and open up Software Center and click the Install button
It fails with ""Error: 0x80070654"
I open up execmgr.log on the client using CMTrace and I use the error lookup tool and it shows that the 0x80070654 error is "This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer
package"
I also see a red highlighted line in the execmgr.log file with the following entry: "Script for Package:PRI00013, Program: SCCM 2012 R2 Management Console failed with exit code 2147944020"
I can run ConsoleSetup.exe using a command line to the package source.
Execmgr.log Contents
Policy arrived for parent package PRI00013 program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:40:48 AM
3336 (0x0D08)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 6l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:40:48 AM
3336 (0x0D08)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094048.938000+000";
MachineName = "My Computer";
ProcessID = 1548;
SiteCode = "PRI";
ThreadID = 3336;
execmgr
7/31/2014 2:40:48 AM 3336 (0x0D08)
Raising client SDK event for class NULL, instance NULL, actionType 6l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:40:48 AM
3568 (0x0DF0)
Validating chain of dependent programs for package PRI00013 optional program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:04 AM
4612 (0x1204)
Validating package PRI00013 program SCCM 2012 R2 Management Console in the chain. The content request ID is {00000000-0000-0000-0000-000000000000}
execmgr 7/31/2014 2:41:04 AM
4612 (0x1204)
Creating an optional execution request for package PRI00013 program SCCM 2012 R2 Management Console
execmgr
7/31/2014 2:41:04 AM 4612 (0x1204)
Requesting content from CAS for package PRI00013 version 1
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Successfully created a content request handle {CBABEBB0-D019-4421-8B2E-47ABF90A925F} for the package PRI00013 version 1
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistWaitingContentEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094105.334000+000";
MachineName = "My Computer";
PackageName = "PRI00013";
PackageVersion = "1";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4612;
execmgr
7/31/2014 2:41:05 AM 4612 (0x1204)
Successfully raised SoftDistWaitingContentEvent event for program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from NotExist to WaitingContent
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
5072 (0x13D0)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4260 (0x10A4)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
5072 (0x13D0)
Processing [{CBABEBB0-D019-4421-8B2E-47ABF90A925F}, 0]: OnContentAvailable
execmgr
7/31/2014 2:41:10 AM 4756 (0x1294)
[{CBABEBB0-D019-4421-8B2E-47ABF90A925F}]: Content Version 1 is available for advert , pkg: PRI00013, program SCCM 2012 R2 Management Console.
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
An existing MTC token was not supplied, using ExecutionRequest's Id as MTC token and this execution request is the owner of resultant MTC task.
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Request a MTC task for execution request of package PRI00013, program SCCM 2012 R2 Management Console with request id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from WaitingContent to Ready
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
MTC task with id {C9942D47-8A99-4363-AE69-A6F813336239}, changed state from 0 to 4
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Processing [{CBABEBB0-D019-4421-8B2E-47ABF90A925F}, 0]: RemoveNotification
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
MTC signaled SWD execution request with program id: SCCM 2012 R2 Management Console, package id: PRI00013 for execution.
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Sending ack to MTC for task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Executing program ConsoleSetup.exe in Admin context
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from Ready to NotifyExecution
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Checking content location C:\Windows\ccmcache\eo for use
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Successfully selected content location C:\Windows\ccmcache\eo
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Executing program as a script execmgr
7/31/2014 2:41:10 AM 4328 (0x10E8)
Successfully prepared command line "C:\Windows\ccmcache\eo\ConsoleSetup.exe"
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Command line = "C:\Windows\ccmcache\eo\ConsoleSetup.exe", Working Directory = C:\Windows\ccmcache\eo\
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Running "C:\Windows\ccmcache\eo\ConsoleSetup.exe" with 32bitLauncher
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Created Process for the passed command line
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
CommandLine = "\"C:\\Windows\\ccmcache\\eo\\ConsoleSetup.exe\"";
DateTime = "20140731094111.028000+000";
MachineName = "My Computer";
PackageName = "PRI00013";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4328;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\ccmcache\\eo\\";
execmgr
7/31/2014 2:41:11 AM 4328 (0x10E8)
Raised Program Started Event for Ad:PRI2000A, Package:PRI00013, Program: SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
MTC task with id {C9942D47-8A99-4363-AE69-A6F813336239}, changed state from 4 to 5
execmgr 7/31/2014 2:41:11 AM
4612 (0x1204)
Program exit code -2147023276 execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Looking for MIF file to get program status execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Script for Package:PRI00013, Program: SCCM 2012 R2 Management Console failed with exit code 2147944020
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramErrorEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094111.506000+000";
ExitCode = "-2147023276";
MachineName = "My Computer";
PackageName = "PRI00013";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4756;
UserContext = "NT AUTHORITY\\SYSTEM";
execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Raised Program Error Event for Ad:PRI2000A, Package:PRI00013, Program: SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Execution is complete for program SCCM 2012 R2 Management Console. The exit code is -2147023276, the execution status is FailureNonRetry
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Requesting MTC to delete task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
MTC task with id: {C9942D47-8A99-4363-AE69-A6F813336239} deleted successfully.
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 10l, value Result:FALSE, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Requesting MTC to delete task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
This execution request does not have a corresponding task in MTC.
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
CServiceWindowEventHandler::Execute - Received SERVICEWINDOWEVENT : END Event
execmgr 7/31/2014 5:00:00 AM
2928 (0x0B70)
ThanksCool, mate it is then.
Yeah it either changed or there is a typo.
I re-created everything and I still get that same 0x80070654 error.
This is really frustrating
Anyway, here is what I see in the AppEnforce.log:
+++ Starting Install enforcement for App DT "SCCM 2012 R2 Management Console" ApplicationDeliveryType - ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, Revision - 1, ContentPath - C:\Windows\ccmcache\ev,
Execution Context - System AppEnforce
7/31/2014 11:27:30 PM 4256 (0x10A0)
A user is logged on to the system.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Performing detection of app deployment type SCCM 2012 R2 Management Console(ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, revision 1) for system.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
+++ Application not discovered. [AppDT Id: ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, Revision: 1]
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
App enforcement environment:
Context: Machine
Command line: consolesetup.exe /q TargetDir="%ProgramFiles%\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server
Allow user interaction: No
UI mode: 1
User token: null
Session Id: 2
Content path: C:\Windows\ccmcache\ev
Working directory:
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Prepared working directory: C:\Windows\ccmcache\ev
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Prepared command line: "C:\Windows\ccmcache\ev\ConsoleSetup.exe" /q TargetDir="C:\Program Files\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Executing Command line: "C:\Windows\ccmcache\ev\ConsoleSetup.exe" /q TargetDir="C:\Program Files\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server with user context
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Working directory C:\Windows\ccmcache\ev
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Post install behavior is BasedOnExitCode
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Waiting for process 2792 to finish. Timeout = 120 minutes.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Process 2792 terminated with exitcode: 2147944020
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Looking for exit code -2147023276 in exit codes table...
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Unmatched exit code (2147944020) is considered an execution failure.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
++++++ App enforcement completed (0 seconds) for App DT "SCCM 2012 R2 Management Console" [ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef], Revision: 1, User SID: ] ++++++
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0) -
IE11 SCCM 2012 Deployment - says installed in software center but after re-boot IE8 Remains
Hello,
I have an issue deploying IE11 to the estate, on the pc's the package says installed in software centre but when the users re-boot it's still IE8 on the machine.
The monitoring tool in SCCM 2012 console lists the install as successful.
I have the appenforce log from one of the machiens with the issue:
Starting Install enforcement for App DT "Internet Explorer 11 - Windows Installer (*.msi file)" ApplicationDeliveryType - ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, Revision - 1, ContentPath
- C:\Windows\ccmcache\19, Execution Context - System AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
A user is logged on to the system. AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Performing detection of app deployment type Internet Explorer 11 - Windows Installer (*.msi file)(ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, revision 1) for system. AppEnforce 28/01/2015
12:30:53 6512 (0x1970)
+++ MSI application not discovered [MSI Product Code: {86DC0963-2A1C-42AB-B664-17C12DBF6C6D}, MSI Product version: ] AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
App enforcement environment:
Context: Machine
Command line: msiexec /i "IE11-Setup-Full.msi" /q
Allow user interaction: No
UI mode: 0
User token: null
Session Id: 4294967295
Content path: C:\Windows\ccmcache\19
Working directory: AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Prepared working directory: C:\Windows\ccmcache\19 AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Found executable file msiexec with complete path C:\Windows\system32\msiexec.exe AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Prepared command line: "C:\Windows\system32\msiexec.exe" /i "IE11-Setup-Full.msi" /q /qn AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Valid MSI Package path = C:\Windows\ccmcache\19\IE11-Setup-Full.msi AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Advertising MSI package [C:\Windows\ccmcache\19\IE11-Setup-Full.msi] to the system. AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Executing Command line: "C:\Windows\system32\msiexec.exe" /i "IE11-Setup-Full.msi" /q /qn with system context AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
Working directory C:\Windows\ccmcache\19 AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
Post install behavior is BasedOnExitCode AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
Waiting for process 7204 to finish. Timeout = 120 minutes. AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
Process 7204 terminated with exitcode: 0 AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
Looking for exit code 0 in exit codes table... AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
Matched exit code 0 to a Success entry in exit codes table. AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
Performing detection of app deployment type Internet Explorer 11 - Windows Installer (*.msi file)(ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, revision 1) for system. AppEnforce 28/01/2015
12:31:05 6512 (0x1970)
+++ Discovered MSI application [AppDT Id: ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, Revision: 1, MSI Product code: {86DC0963-2A1C-42AB-B664-17C12DBF6C6D}, MSI Product version: ] AppEnforce
28/01/2015 12:31:05 6512 (0x1970)
++++++ App enforcement completed (11 seconds) for App DT "Internet Explorer 11 - Windows Installer (*.msi file)" [ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3], Revision:
1, User SID: ] ++++++ AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
This is the CAS log:
Saved Content ID Mapping e9dea25d-d24d-4d5c-a767-52068338e976.1, C:\Windows\ccmcache\12 ContentAccess 28/01/2015 10:12:41 6884 (0x1AE4)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:12:57 9832 (0x2668)
Releasing content request {1738FD09-9D1F-4708-9266-A418E9EB049A} ContentAccess 28/01/2015 10:12:57 9832 (0x2668)
All references to Content 1a757176-8b61-4c70-b147-10cdbbfdd0b5.1 in cache have been removed. Content will be Tombstoned. ContentAccess 28/01/2015 10:12:57
9832 (0x2668)
Saved Content ID Mapping 1a757176-8b61-4c70-b147-10cdbbfdd0b5.1, C:\Windows\ccmcache\13 ContentAccess 28/01/2015 10:12:57 9832 (0x2668)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:13:10 8140 (0x1FCC)
Releasing content request {25035F86-891D-41D3-AD45-F845D8689F88} ContentAccess 28/01/2015 10:13:10 8140 (0x1FCC)
All references to Content cedf67fc-735e-4360-8db4-c8cb5d39663c.1 in cache have been removed. Content will be Tombstoned. ContentAccess 28/01/2015 10:13:10
8140 (0x1FCC)
Saved Content ID Mapping cedf67fc-735e-4360-8db4-c8cb5d39663c.1, C:\Windows\ccmcache\14 ContentAccess 28/01/2015 10:13:10 8140 (0x1FCC)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:14:12 14352 (0x3810)
Releasing content request {BB6AA813-A4F7-4095-B60D-4441E3D7833D} ContentAccess 28/01/2015 10:14:12 14352 (0x3810)
All references to Content 108336d1-2d2c-4d93-87b3-49d335640f2a.1 in cache have been removed. Content will be Tombstoned. ContentAccess 28/01/2015 10:14:12
14352 (0x3810)
Saved Content ID Mapping 108336d1-2d2c-4d93-87b3-49d335640f2a.1, C:\Windows\ccmcache\15 ContentAccess 28/01/2015 10:14:12 14352 (0x3810)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:14:30 13956 (0x3684)
Releasing content request {2CA9AC92-0716-49A7-86D4-434B88B4D07B} ContentAccess 28/01/2015 10:14:30 13956 (0x3684)
All references to Content 3fb07321-f1d1-4b71-90f1-233b355b13dd.1 in cache have been removed. Content will be Tombstoned. ContentAccess 28/01/2015 10:14:30
13956 (0x3684)
Saved Content ID Mapping 3fb07321-f1d1-4b71-90f1-233b355b13dd.1, C:\Windows\ccmcache\16 ContentAccess 28/01/2015 10:14:30 13956 (0x3684)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:15:53 10588 (0x295C)
Releasing content request {47EB54C8-54C9-4FF8-A302-53AF844FA275} ContentAccess 28/01/2015 10:15:53 10588 (0x295C)
All references to Content 9e56a46e-9a6a-42a5-b52b-811231a0ec2e.1 in cache have been removed. Content will be Tombstoned. ContentAccess 28/01/2015 10:15:53
10588 (0x295C)
Saved Content ID Mapping 9e56a46e-9a6a-42a5-b52b-811231a0ec2e.1, C:\Windows\ccmcache\17 ContentAccess 28/01/2015 10:15:53 10588 (0x295C)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:16:11 12040 (0x2F08)
Releasing content request {F230295F-5136-49C7-B1FF-68697DA4C421} ContentAccess 28/01/2015 10:16:11 12040 (0x2F08)
All references to Content 21ffbbb7-e491-48c1-b515-f5d6dc72f3fd.1 in cache have been removed. Content will be Tombstoned. ContentAccess 28/01/2015 10:16:11
12040 (0x2F08)
Saved Content ID Mapping 21ffbbb7-e491-48c1-b515-f5d6dc72f3fd.1, C:\Windows\ccmcache\18 ContentAccess 28/01/2015 10:16:11 12040 (0x2F08)
Requesting content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, size(KB) 98073, under context System with priority Medium ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
User policy requested with no user credentials. ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Invalid user. ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Submitted CTM job {7174344D-6757-429C-BA3D-A6FBE9A34DA7} to download Content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 under context System ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Successfully created download request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Location update from CTM for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 and request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download location found 0 - http://USS-LON-SCCMDP1.uss.co.uk/SMS_DP_SMSPKG$/Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download location found 1 - http://USS-LON-SCCMMAN.uss.co.uk/SMS_DP_SMSPKG$/Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download request only, ignoring location update ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download started for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 12268 (0x2FEC)
Download completed for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 under context System ContentAccess 28/01/2015 12:30:52 5228 (0x146C)
Computed hash: F6BEAA17C60572A0751C74DACE26075CC2621CF72F23B09EFEEA4C928A3B0E54 ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Hash verification succeeded for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 downloaded under context System ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Saved Content ID Mapping Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, C:\Windows\ccmcache\19 ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Download succeeded for download request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Error: DeleteDirectory:- Failed to delete Directory C:\Windows\ccmcache\19.BCWork with Error 0x00000002. ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Saved Content ID Mapping Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, C:\Windows\ccmcache\19 ContentAccess 28/01/2015 12:30:53 12104 (0x2F48)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 12:31:05 10856 (0x2A68)
Releasing content request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} ContentAccess 28/01/2015 12:31:05 12104 (0x2F48)
All references to Content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 in cache have been removed. Content will be Tombstoned. ContentAccess 28/01/2015
12:31:05 12104 (0x2F48)
Saved Content ID Mapping Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, C:\Windows\ccmcache\19 ContentAccess 28/01/2015 12:31:05 12104 (0x2F48)If the command-line you gave ConfigMgr runs successfully, there's not anything else ConfigMgr can do. Thus the logs above don't add any value. Thus, the issue lies with the MSI. Where did you get it from? Have you tried running it with the /l*v command-line
option to add verbose logging and then reviewed this log file? Have you tried manually testing using the System account (done using psexec) to more closely emulate how ConfigMgr invokes the command-line?
Jason | http://blog.configmgrftw.com | @jasonsandys -
Hi,
Any help appreciated!!
I'm getting this error: "The remote server returned an error: (401) unauthorised when I debug a provider-hosted app. I get the error on this line:
HttpWebResponse response = (HttpWebResponse)request.GetResponse();
See code below
I created a high trust development environment following the instructions provided here:
http://msdn.microsoft.com/en-us/library/office/fp179901(v=office.15).aspx and
http://msdn.microsoft.com/library/office/fp179923
I created a provider-hosted app with the intent to:
create a SharePoint list in the appweb
Use self-signed certificate, tokenhepler.cs and sharepointcontext.cs to retrieve current user context and access on SharePoint. (No changes were made to tokenhelper.cs and sharepointcontext.cs)
retrieve list items from the SharePoint list in a button click event handler on a default.aspx of the remote web
What happens:
The app is deployed successfully to the Dev site
The SharePoint feature is deployed and activated
The default.aspx page of the remote web loads
The error (see image) is returned on clicking of the button
My environment is an on-premise SharePoint 2013 with AD and my dev box is standalone windows 8.1 running Visual Studio Professional 2013 Update 3.
The code block below is a copy of the default.aspx code-behind
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using Microsoft.SharePoint.Client;
using Microsoft.IdentityModel.S2S.Tokens;
using System.Net;
using System.IO;
using System.Xml;
using System.Data;
using System.Xml.Linq;
using System.Xml.XPath;
namespace Idea.GeneratorWeb
public partial class Default : System.Web.UI.Page
SharePointContextToken contextToken;
string accessToken;
Uri sharepointUrl;
protected void Page_PreInit(object sender, EventArgs e)
Uri redirectUrl;
switch (SharePointContextProvider.CheckRedirectionStatus(Context, out redirectUrl))
case RedirectionStatus.Ok:
return;
case RedirectionStatus.ShouldRedirect:
Response.Redirect(redirectUrl.AbsoluteUri, endResponse: true);
break;
case RedirectionStatus.CanNotRedirect:
Response.Write("An error occurred while processing your request.");
Response.End();
break;
protected void Page_Load(object sender, EventArgs e)
//// The following code gets the client context and Title property by using TokenHelper.
//// To access other properties, the app may need to request permissions on the host web.
var spContext = SharePointContextProvider.Current.GetSharePointContext(Context);
//var spContext = new ClientContext("MySPDevInstance");
//spContext.Credentials = new NetworkCredential("username", "password");
//using (var clientContext = spContext.CreateUserClientContextForSPHost())
// clientContext.Load(clientContext.Web, web => web.Title);
// clientContext.ExecuteQuery();
// Response.Write(clientContext.Web.Title);
string contextTokenString = TokenHelper.GetContextTokenFromRequest(Request);
if (contextTokenString != null)
// Get context token
contextToken = TokenHelper.ReadAndValidateContextToken(contextTokenString, Request.Url.Authority);
// Get access token
sharepointUrl = new Uri(Request.QueryString["SPAppWebUrl"]);
accessToken = TokenHelper.GetAccessToken(contextToken, sharepointUrl.Authority).AccessToken;
// Pass the access token to the button event handler.
Button1.CommandArgument = accessToken;
protected void Button1_Click(object sender, EventArgs e)
// Retrieve the access token that the Page_Load method stored
// in the button's command argument.
string accessToken = ((Button)sender).CommandArgument;
if (IsPostBack)
sharepointUrl = new Uri(Request.QueryString["SPAppWebUrl"]);
// REST/OData URL section
string oDataUrl = "/_api/Web/lists/getbytitle('Diagrams In Idea Generator')/items?$select=Title,Diagram,SharingStatus";
// HTTP Request and Response construction section
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(sharepointUrl.ToString() + oDataUrl);
request.Method = "GET";
request.Accept = "application/atom+xml";
request.ContentType = "application/atom+xml;type=entry";
request.Headers.Add("Authorization", "Bearer " + accessToken);
HttpWebResponse response = (HttpWebResponse)request.GetResponse();
// Response markup parsing section
XDocument oDataXML = XDocument.Load(response.GetResponseStream(), LoadOptions.None);
XNamespace atom = "http://www.w3.org/2005/Atom";
XNamespace d = "http://schemas.microsoft.com/ado/2007/08/dataservices";
XNamespace m = "http://schemas.microsoft.com/ado/2007/08/dataservices/metadata";
List<XElement> entries = oDataXML.Descendants(atom + "entry")
.Elements(atom + "content")
.Elements(m + "properties")
.ToList();
var entryFieldValues = from entry in entries
select new
Character = entry.Element(d + "Title").Value,
Actor = entry.Element(d + "Diagram").Value,
CastingStatus = entry.Element(d + "SharingStatus").Value
GridView1.DataSource = entryFieldValues;
GridView1.DataBind();
Any ideas what I might be doing wrongHi ,
Use the below code
Public string GetAccessToken(){
string sharePointSiteUrlHost = Page.Request["SPHostUrl"].Tostring();
string AccessToken = tokenHelper.GetS2SAccessTokenWithWindowsIdentity(sharePointSiteUrlHost, Request.LogonUserIdentity);
return accessToken;
Than initialize the ClientCOntext with the below Method
private static ClientContext GetClientContextWithAccessTokenString(string targetUrl, object accessToken)
ClientContext clientContext = new ClientContext(targetUrl);
clientContext.AuthenticationMode = ClientAuthenticationMode.Anonymous;
clientContext.FormDigestHandlingEnabled = false;
clientContext.ExecutingWebRequest +=
delegate(object oSender, WebRequestEventArgs webRequestEventArgs)
webRequestEventArgs.WebRequestExecutor.WebRequest.UserAgent = "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)";
webRequestEventArgs.WebRequestExecutor.RequestHeaders["Authorization"] =
"Bearer " + accessToken;
return clientContext;
use this clientCOntext and it will work.
Do not use
SharePointContextProvider
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer -
[SOLVED]"The requested URL returned error: 407" while using pacman
pacman worked fine until now. When I try to upgrade with
pacman -Syu
it returns what is written below even though internet works fine without problems(I'm posting from the same system using firefox)
How can I get pacman working again?
:: Synchronizing package databases...
error: failed retrieving file 'core.db' from mirror.cse.iitk.ac.in : The requested URL returned error: 403
error: failed retrieving file 'core.db' from mirror.cse.iitk.ac.in : The requested URL returned error: 403
error: failed retrieving file 'core.db' from [url=ftp://ftp.jaist.ac.jp]ftp.jaist.ac.jp[/url] : The requested URL returned error: 407
error: failed retrieving file 'core.db' from [url=ftp://ftp.jaist.ac.jp]ftp.jaist.ac.jp[/url] : The requested URL returned error: 407
error: failed retrieving file 'core.db' from mirror.yongbok.net : The requested URL returned error: 407
error: failed retrieving file 'core.db' from mirror.yongbok.net : The requested URL returned error: 407
error: failed to update core (download library error)
error: failed retrieving file 'extra.db' from mirror.cse.iitk.ac.in : The requested URL returned error: 403
error: failed retrieving file 'extra.db' from mirror.cse.iitk.ac.in : The requested URL returned error: 403
error: failed retrieving file 'extra.db' from [url=ftp://ftp.jaist.ac.jp]ftp.jaist.ac.jp[/url] : The requested URL returned error: 407
error: failed retrieving file 'extra.db' from [url=ftp://ftp.jaist.ac.jp]ftp.jaist.ac.jp[/url] : The requested URL returned error: 407
error: failed retrieving file 'extra.db' from mirror.yongbok.net : The requested URL returned error: 407
error: failed retrieving file 'extra.db' from mirror.yongbok.net : The requested URL returned error: 407
error: failed to update extra (download library error)
error: failed retrieving file 'community.db' from mirror.cse.iitk.ac.in : The requested URL returned error: 403
error: failed retrieving file 'community.db' from mirror.cse.iitk.ac.in : The requested URL returned error: 403
error: failed retrieving file 'community.db' from [url=ftp://ftp.jaist.ac.jp]ftp.jaist.ac.jp[/url] : The requested URL returned error: 407
error: failed retrieving file 'community.db' from [url=ftp://ftp.jaist.ac.jp]ftp.jaist.ac.jp[/url] : The requested URL returned error: 407
error: failed retrieving file 'community.db' from mirror.yongbok.net : The requested URL returned error: 407
error: failed retrieving file 'community.db' from mirror.yongbok.net : The requested URL returned error: 407
error: failed to update community (download library error)
error: failed retrieving file 'archlinuxfr.db' from repo.archlinux.fr : The requested URL returned error: 407
error: failed to update archlinuxfr (download library error)
error: failed to synchronize any databases
error: failed to init transaction (download library error)
Last edited by ebshankar (2012-02-19 08:08:59)hokasch wrote:
What did you update? Are you using a proxy?
You can try pacman -Syy --debug which will show the actual url it tries to access. When posting console output, please use the code tags.
I tried to upgrade the system.
I don't use a proxy. My isp uses authentication from the browser, when the browser is authenticated with the username and password, the whole system will be connected to the internet as long as the authentication page is open.
Here is the output of "pacman -Syy --debug":
debug: parseconfig: options pass
debug: config: attempting to read file /etc/pacman.conf
debug: config: finish section '(null)'
debug: config: new section 'options'
debug: config: HoldPkg: pacman
debug: config: HoldPkg: glibc
debug: config: SyncFirst: pacman
debug: config: arch: x86_64
debug: config: SigLevel: Never
debug: config: finish section 'options'
debug: config: new section 'core'
debug: config file /etc/pacman.conf, line 81: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'core'
debug: config: new section 'extra'
debug: config file /etc/pacman.conf, line 85: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'extra'
debug: config: new section 'community'
debug: config file /etc/pacman.conf, line 93: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'community'
debug: config: new section 'archlinuxfr'
debug: config: finish section 'archlinuxfr'
debug: config: finished parsing /etc/pacman.conf
debug: setup_libalpm called
debug: option 'logfile' = /var/log/pacman.log
debug: option 'gpgdir' = /etc/pacman.d/gnupg/
debug: option 'cachedir' = /var/cache/pacman/pkg/
debug: parseconfig: repo pass
debug: config: attempting to read file /etc/pacman.conf
debug: config: finish section '(null)'
debug: config: new section 'options'
debug: config: finish section 'options'
debug: config: new section 'core'
debug: config file /etc/pacman.conf, line 81: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'core'
debug: registering sync database 'core'
debug: database path for tree core set to /var/lib/pacman/sync/core.db
debug: adding new server URL to database 'core': ftp://mirror.cse.iitk.ac.in/archlinux/core/os/x86_64
debug: adding new server URL to database 'core': http://mirror.cse.iitk.ac.in/archlinux/core/os/x86_64
debug: adding new server URL to database 'core': ftp://ftp.jaist.ac.jp/pub/Linux/ArchLinux/core/os/x86_64
debug: adding new server URL to database 'core': http://ftp.jaist.ac.jp/pub/Linux/ArchLinux/core/os/x86_64
debug: adding new server URL to database 'core': ftp://mirror.yongbok.net/archlinux/core/os/x86_64
debug: adding new server URL to database 'core': http://mirror.yongbok.net/archlinux/core/os/x86_64
debug: config: new section 'extra'
debug: config file /etc/pacman.conf, line 85: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'extra'
debug: registering sync database 'extra'
debug: database path for tree extra set to /var/lib/pacman/sync/extra.db
debug: adding new server URL to database 'extra': ftp://mirror.cse.iitk.ac.in/archlinux/extra/os/x86_64
debug: adding new server URL to database 'extra': http://mirror.cse.iitk.ac.in/archlinux/extra/os/x86_64
debug: adding new server URL to database 'extra': ftp://ftp.jaist.ac.jp/pub/Linux/ArchLinux/extra/os/x86_64
debug: adding new server URL to database 'extra': http://ftp.jaist.ac.jp/pub/Linux/ArchLinux/extra/os/x86_64
debug: adding new server URL to database 'extra': ftp://mirror.yongbok.net/archlinux/extra/os/x86_64
debug: adding new server URL to database 'extra': http://mirror.yongbok.net/archlinux/extra/os/x86_64
debug: config: new section 'community'
debug: config file /etc/pacman.conf, line 93: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'community'
debug: registering sync database 'community'
debug: database path for tree community set to /var/lib/pacman/sync/community.db
debug: adding new server URL to database 'community': ftp://mirror.cse.iitk.ac.in/archlinux/community/os/x86_64
debug: adding new server URL to database 'community': http://mirror.cse.iitk.ac.in/archlinux/community/os/x86_64
debug: adding new server URL to database 'community': ftp://ftp.jaist.ac.jp/pub/Linux/ArchLinux/community/os/x86_64
debug: adding new server URL to database 'community': http://ftp.jaist.ac.jp/pub/Linux/ArchLinux/community/os/x86_64
debug: adding new server URL to database 'community': ftp://mirror.yongbok.net/archlinux/community/os/x86_64
debug: adding new server URL to database 'community': http://mirror.yongbok.net/archlinux/community/os/x86_64
debug: config: new section 'archlinuxfr'
debug: config: finish section 'archlinuxfr'
debug: registering sync database 'archlinuxfr'
debug: database path for tree archlinuxfr set to /var/lib/pacman/sync/archlinuxfr.db
debug: adding new server URL to database 'archlinuxfr': http://repo.archlinux.fr/x86_64
debug: config: finished parsing /etc/pacman.conf
:: Synchronizing package databases...
debug: url: ftp://mirror.cse.iitk.ac.in/archlinux/core/os/x86_64/core.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/core.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'core.db' from mirror.cse.iitk.ac.in : The requested URL returned error: 403
debug: url: http://mirror.cse.iitk.ac.in/archlinux/core/os/x86_64/core.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/core.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'core.db' from mirror.cse.iitk.ac.in : The requested URL returned error: 403
debug: url: ftp://ftp.jaist.ac.jp/pub/Linux/ArchLinux/core/os/x86_64/core.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/core.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'core.db' from ftp.jaist.ac.jp : The requested URL returned error: 407
debug: url: http://ftp.jaist.ac.jp/pub/Linux/ArchLinux/core/os/x86_64/core.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/core.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'core.db' from ftp.jaist.ac.jp : The requested URL returned error: 407
debug: url: ftp://mirror.yongbok.net/archlinux/core/os/x86_64/core.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/core.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'core.db' from mirror.yongbok.net : The requested URL returned error: 407
debug: url: http://mirror.yongbok.net/archlinux/core/os/x86_64/core.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/core.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'core.db' from mirror.yongbok.net : The requested URL returned error: 407
debug: failed to sync db: download library error
error: failed to update core (download library error)
debug: url: ftp://mirror.cse.iitk.ac.in/archlinux/extra/os/x86_64/extra.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/extra.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'extra.db' from mirror.cse.iitk.ac.in : The requested URL returned error: 403
debug: url: http://mirror.cse.iitk.ac.in/archlinux/extra/os/x86_64/extra.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/extra.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'extra.db' from mirror.cse.iitk.ac.in : The requested URL returned error: 403
debug: url: ftp://ftp.jaist.ac.jp/pub/Linux/ArchLinux/extra/os/x86_64/extra.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/extra.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'extra.db' from ftp.jaist.ac.jp : The requested URL returned error: 407
debug: url: http://ftp.jaist.ac.jp/pub/Linux/ArchLinux/extra/os/x86_64/extra.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/extra.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'extra.db' from ftp.jaist.ac.jp : The requested URL returned error: 407
debug: url: ftp://mirror.yongbok.net/archlinux/extra/os/x86_64/extra.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/extra.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'extra.db' from mirror.yongbok.net : The requested URL returned error: 407
debug: url: http://mirror.yongbok.net/archlinux/extra/os/x86_64/extra.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/extra.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'extra.db' from mirror.yongbok.net : The requested URL returned error: 407
debug: failed to sync db: download library error
error: failed to update extra (download library error)
debug: url: ftp://mirror.cse.iitk.ac.in/archlinux/community/os/x86_64/community.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/community.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'community.db' from mirror.cse.iitk.ac.in : The requested URL returned error: 403
debug: url: http://mirror.cse.iitk.ac.in/archlinux/community/os/x86_64/community.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/community.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'community.db' from mirror.cse.iitk.ac.in : The requested URL returned error: 403
debug: url: ftp://ftp.jaist.ac.jp/pub/Linux/ArchLinux/community/os/x86_64/community.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/community.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'community.db' from ftp.jaist.ac.jp : The requested URL returned error: 407
debug: url: http://ftp.jaist.ac.jp/pub/Linux/ArchLinux/community/os/x86_64/community.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/community.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'community.db' from ftp.jaist.ac.jp : The requested URL returned error: 407
debug: url: ftp://mirror.yongbok.net/archlinux/community/os/x86_64/community.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/community.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'community.db' from mirror.yongbok.net : The requested URL returned error: 407
debug: url: http://mirror.yongbok.net/archlinux/community/os/x86_64/community.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/community.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'community.db' from mirror.yongbok.net : The requested URL returned error: 407
debug: failed to sync db: download library error
error: failed to update community (download library error)
debug: url: http://repo.archlinux.fr/x86_64/archlinuxfr.db
debug: maxsize: 26214400
debug: opened tempfile for download: /var/lib/pacman/sync/archlinuxfr.db.part (wb)
debug: curl returned error 22 from transfer
error: failed retrieving file 'archlinuxfr.db' from repo.archlinux.fr : The requested URL returned error: 407
debug: failed to sync db: download library error
error: failed to update archlinuxfr (download library error)
error: failed to synchronize any databases
error: failed to init transaction (download library error)
debug: unregistering database 'local'
debug: unregistering database 'core'
debug: unregistering database 'extra'
debug: unregistering database 'community'
debug: unregistering database 'archlinuxfr'
Last edited by ebshankar (2012-02-18 14:18:30) -
[SOLVED] The requested URL returned error: 403 Forbidden
Hi guys
(sory for my english
I have a problem with packer -Syu
the output:
Proceed with installation? [Y/n] y
Edit openbox-menu PKGBUILD with $EDITOR? [Y/n] n
==> Making package: openbox-menu 0.3.6.8-1 (Tue Feb 12 15:52:19 UTC 2013)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading openbox-menu-0.3.6.8.tar.bz2...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
curl: (22) The requested URL returned error: 403 Forbidden
==> ERROR: Failure while downloading openbox-menu-0.3.6.8.tar.bz2
Aborting...
The build failed.
for full detials:
http://pastebin.com/Acq0uY78
iam try another mirrors... but i get same problen
i install tor (for use tsocks or torify) but its dont work in my country
HELP ME PLZ
thanks
Last edited by tareef (2013-02-14 19:39:07)It's http://mimarchlinux.googlecode.com/file … .8.tar.bz2, just as the PKGBUILD says.
Edit:
If something is broken, you should ask on the AUR page for the maintainer to fix the PKGBUILD https://aur.archlinux.org/packages/openbox-menu/, but the PKGBUILD worked for me.
tareef wrote:
for full detials:
http://pastebin.com/Acq0uY78
iam try another mirrors... but i get same problen
i install tor (for use tsocks or torify) but its dont work in my country
openbox-menu is from the AUR and not from the repos, so changing mirrors won't do anything here. You might want to read on what AUR is and deal with the issues with the signatures first.
Last edited by karol (2013-02-13 00:10:04) -
Adobe Flash appears to be installing with SCCM 2012 deployment, but ActiveX is missing
I have found that even though SCCM 2012 deployment has installed flash, I later find that Active X is missing and that it is missing a registry key ?
HKLM:\Software\Microsoft\Macromed\FlashPlayerActiveX
Anybody have this problem?Yes, look at http://forums.adobe.com/thread/1447047
-
My Stored Procedures and Jobs Showing this Error. Even though i can able to access the data throgh SSMS in Database Engine.Please help on this.
Executed as user: RMS\Administrator. The operating system returned error 23(Data error (cyclic redundancy check).) to SQL Server during a read at offset 0x000006684a2000 in file 'F:\RMSLiveData\RMS.mdf'. Additional messages in the SQL Server error log and
system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors;
for more information, see SQL Server Books Online. [SQLSTATE HY000] (Error 823). The step failed.
Thanks
RehaanKhan. MDBCCCHECKDB('DBNAME',REPAIR_ALLOW_DATA_LOSS)
For crying out loud! Don't you have any shame!
There are situations where you may have to run DBCC CHECKDB with the option REPAIR_ALLOW_DATA_LOSS, but it is not the first thing you shold try if the database seems to be corrupt. Particularly, you should first make sure that you work on a copy of the database
files. REPAIR_ALLOW_DATA_LOSS means that DBCC CHECKDB has carte blanche to throw all pages it can piece together - which could be about all data pages if it is that bad.
Corruption siuations are very difficult to assist with in forums, because there can be a lot of stake. The only advice I can give is to restore the database from a clean backup. If you don't have a clean backup, you have a problem. The database may still
be saved, but you need an expert on site to help you, if you have never worked with this before. Advice given in this forum applied haphazardly can result in more damage that you already have.
But, oh, one thing: this type of corruption are always due to hardware errors like bad disks or bad memory sticks. So just restoring the database is not enough. Finding new hardware is important too.
Erland Sommarskog, SQL Server MVP, [email protected]
Actually on the same disk there are other Databases Stored and they work Properly and Backup also can be taken for that Databases. But, for this particular database only this error is happening when iam trying to take backup. But data retrieval and access to
front end application happening as usual. Please help on this.
RehaanKhan. M -
When trying to load music from ITunes to my ipod I receive the error "The software required for the ipod is not installed correctly. Please reinstall itunes to install the required sotware"
What should I do to correct the error?For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies. The notes below the box include tips on removing troublesome components.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2 -
The operating system returned error 170(The requested resource is in use)
Hello Experts,
We have a Sharepoint farm where we are receiving OS Error 170 for many days. It results in database shutdown/Start because required transaction file is not available.
The operating system returned error 170(The requested resource is in use.) to SQL Server during a write at offset 0x0000029495e000 in file 'F:\MSSQL10_50.INST1\MSSQL\DATA\****.***. Additional messages in the SQL
Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately
Write error during log flush.
Error: 9001, Severity: 21, State: 4.
The log for database 'DBNAME' is not available
We have checked the Anti Virus but all data files are excluded. We have also disabled the anti virus for some time but still issue persist.
This is a Virtual Machine and no VM snapshot backup is running during the time window.
Please help!
Thanks in advance.
Regards,
Divesh MathurHello Experts,
We have a Sharepoint farm where we are receiving OS Error 170 for many days. It results in database shutdown/Start because required transaction file is not available.
The operating system returned error 170(The requested resource is in use.) to SQL Server during a write at offset 0x0000029495e000 in file 'F:\MSSQL10_50.INST1\MSSQL\DATA\****.***. Additional messages in the SQL
Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately
Write error during log flush.
Error: 9001, Severity: 21, State: 4.
The log for database 'DBNAME' is not available
Hello,
I sense a disk issue here( I am not sure).Log for database is not available seems when data needs to be written on log file it was not avaialble.Can you check with storage team that disk on which SQL server files reside is OK
Secondly did you run DBCC CHECKDB for your database in picture can you paste result of it.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
Maybe you are looking for
-
File sender adapter: trigger mail if file is not there
Hi, I have an scenario where I have a file sender adapter, and I need to look for a file in a specific folder from a specific FTP site. If the file is not present there, I need to trigger an alert to let some people know that the file was not found.
-
Need help with reviewing in acrobat professional 8.0
Hi, I need help with reviewing in adobe acrobat professional 8.0 for windows. When I click in Edit->Preferences->Reviewing I choose Network folder and in browse button I select the network folder. It´s ok, but when I restart the computer, the configu
-
Can only use the first page of Pages 09' Templates
When I am looking through the provided templates in Pages 09', I put my mouse over the template and it scrolls through many pages of that one template. But then when I select the template that shows multiple pages, only the first page shows up and is
-
Exchange Rate for GR same entered in PO
Hi All! We cover our exposure for foreign POs at the time of placing a PO and the same exchange rate is entered in PO. we want the GR to be posted with the same rate. But system valuates the GR with rate applicable for the GR date from global table.
-
Best Practice Analyzer Results: Health Report Error EDS AlertValue Unhealthy.
I ran the Microsoft Office 365 Best Practices Analyzer Beta 1.0 and I get the following error: C:\windows\system32>Get-healthreport -rollupgroup servername.. then I got lots of results.. I narrow it to the following! PSComputerName : kaneex1