SCCM 2012 deployed application outside of Maint Window and before Deployment time

I have an application that I set for deployment time of 7pm today. The collection that I deployed it to had a maint window start time of 7pm - stop time of 6am.
Its 3:12 (MST) and 4:12 in my regional office, however they have all got the software installed.
Am I overlooking something, what did I do wrong? Is there a setting somewhere that I need to check?

I have time based on: UTC should I change that to Client Local Time? I thought UTC meant that for example if I have deployment set at 7pm and My sccm server is in a different time zone that when the respective time zone reached 7pm that it would start the
deployment.
I clicked on the maint Tab on the collection that I deployed it to and there is only 1 maint window for that collection.
I went to a client that it installed on and viewed the execmgr.log. The lasttime it was populated was today at 6am. I then tried another client and same thing last entry was from 6am.

Similar Messages

Adobe Flash appears to be installing with SCCM 2012 deployment, but ActiveX is missing

I have found that even though SCCM 2012 deployment has installed flash, I later find that Active X is missing and that it is missing a registry key ?
HKLM:\Software\Microsoft\Macromed\FlashPlayerActiveX
Anybody have this problem?

Yes, look at http://forums.adobe.com/thread/1447047

How to add a scroll bar within a view window ?I want to display x and y axis outside the scoll window and keep those axis static and move the graph within scroll area

how to add a scroll bar within a view window ?I want to display x and y axis outside the scoll window and keep those axis static and move the graph within scroll area
ananya

Hey Ananya,
I believe what you want to do is possible, but it will not be
easy. If you want to add a scroll bar that will scroll the graph
back and forth but keep the axis set, you would want to add a
horizontal or vertical scrollbar. Then you would create an event
handler for the scroll event. You would have to manually plot
different data within this scroll event. Unfortunately, there is
not really a built in way to do this with the Measurement Studio plot
control.
Thanks,
Pat P.
Software Engineer
National Instruments

RMAN-20207: UNTIL TIME or RECOVERY WINDOW is before RESETLOGS time

Hello,
i am working for a scenerio and you can see my restore script below,
RMAN> RUN
2> {
3> SET UNTIL TIME "to_date('24-05-2010 18:00:00','DD-MM-YYYY HH24:MI:SS')";
4> RESTORE DATABASE;
5> RECOVER DATABASE;
6> }
executing command: SET until clause
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of set command at 05/26/2010 11:23:24
RMAN-20207: UNTIL TIME or RECOVERY WINDOW is before RESETLOGS time
also you can see my backups,
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
89 B 1 A DISK 24-05-2010 15:36:04 1 1 NO BACKU
P_BISE1DB_000_052410030823
90 B 1 A DISK 24-05-2010 15:36:13 1 1 NO BACKU
P_BISE1DB_000_052410030823
91 B 0 A DISK 25-05-2010 12:01:09 1 1 NO TAG20
100525T113815
92 B 0 A DISK 25-05-2010 12:01:13 1 1 NO TAG20
100525T113815
93 B 1 A DISK 25-05-2010 12:01:55 1 1 NO TAG20
100525T120152
94 B 1 A DISK 25-05-2010 12:04:55 1 1 NO TAG20
100525T120451
95 B 1 A DISK 25-05-2010 13:55:00 1 1 NO TAG20
100525T134431
96 B 1 A DISK 25-05-2010 13:55:09 1 1 NO TAG20
100525T134431
97 B 1 A DISK 25-05-2010 14:01:43 1 1 NO TAG20
100525T140139
98 B 1 A DISK 25-05-2010 14:55:33 1 1 NO TAG20
100525T140356
so i am trying to understand that what is the earliest date that i can restore my database and avoid tihs error, according to the my backup sets?
thank you
Ugur

Please query the following query and specify the RESETLOGS time
SELECT RESETLOGS_TIME FROM v$database;
i cant have result with this, because database is mount state,
And post the result of the following command to provide an information about database incarnations:
RMAN>LIST INCARNATION
RMAN> list incarnation;
using target database control file instead of recovery catalog
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 BISE1DB 4092555014 PARENT 1116016 01-05-2007 16:22:55
2 2 BISE1DB 4092555014 PARENT 1226717 14-12-2007 15:28:11
3 3 BISE1DB 4092555014 PARENT 5783997202 04-05-2010 09:59:11
4 4 BISE1DB 4092555014 CURRENT 5785721070 26-05-2010 10:59:32
thank you

SCCM 2012 R2 - Application Deployment - on startup

Hi, I would like to deploy Office 2010 Pro Plus and Lync 2013. Both packages have already been created and tested. I would like to set the install to occur on machine startup. Right now, if i add the machine to the AD Group set for the Lync and Office installs,
it installs randomly during the day on a test machine.
As I am new to SCCM, how can i set the install to occur on machine startup. It doesnt make sense to install Office during the day while a person is using it! I will be able to pinpoint which machines require Office 2010 installed before I install Lync 2013.
If you need anymore info from me, as the above may not be clear, please let me know
Thanks
SCCM 2012 R2/Windows 7 Enterprise/Office 2010 Pro Plus/Lync 2013

Hi,
If you create the Office package as a package/program then you can set it to run on Computer startup, applications cannot be deployed that way.
However, using at computer startup often gives very low number on actual installs becuase if the user logs in directly when the computer startup the installation will not run.
I normally use PSAppdeploymen toolkit and prompt the user to close running office applications prior to the upgrade, then the user can postpone the installation as well and much much more.
https://psappdeploytoolkit.codeplex.com/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012 deploy windows 7: how to manage network/server load?

Hi,
Hypotetically, if you would deploy Windows 7 to hundreds of pc’s at once, how could you manage that, regarding organizing the deploy, regarding network/server load? F.e. you deploy to a collection which has 500 pc’s, users can select when
to load the OS (Windows XP, we deploy the SCCM 2012 client, they can choose when to install)
*How can you be sure network is not overloaded?
*Can you limit in SCCM 2012 bandwith usage?
Please advise.
J.
Jan Hoedt

You need to be as local as possible. You can host a deployment point role on a client OS such as windows 7 so you could temporarily setup one machine hosting OS images and then rebuild it last as well.
On a 100MB LAN with DP's hosted in a datacenter (not on subnet) we get to about 75 machines building at once before we see TFTP timeouts on PXE booting due to load on the local network. I would get your build as quick as possible and then do them in increasing
block sizes whilst monitoring the network and server load.
To speed up builds you could...
Build and capture to get a WIM file with most apps and updates in it.
Change the TFTPBlockSize registry settings on the DP's (If PXE booting) to as high as it will go
Host WIM files on your DP's with the Package share settings configured and enable the "Access content directly..." option in the Apply Operating System part of your task sequence.
Hope this helps.
Shaun

SCCM 2012 Deployment Packages and Applications deployment order

Hello I have an application which deploys Office 2013 through SCCM 2012 I then want to copy some templates to two directories in Office. I have added a script the OFC tool which is suppose to run after the install. But the files don't appear. If I run the
same script manually all the files are copied. I ended up creating a package just for the Office Template files, but I have to run this manually afterwards. Should I Persist with the script or is there a way to run the package automatically after the application
deployed has run?

Sounds like best solution is to create an MSI that can copy the template files and deploy as an application after Office Install. Is this something I can do in Install Shield?
Seems weird that they would have an option in the MSP to run a script but it doesn't work.
I wouldn't go to that trouble myself, but that's because I don't author MSIs as part of my role (we have a packaging team who do that task, and they seem to regard authoring an MSI as the solution for everything ;)
the ConfigMgr AppModel happily caters for all kinds of payloads, despite referring to them as "applications" there is no requirement for the payload to be an MSI.
MS have long documented that the "run scripts" and "chaining" features of the Office setup engine are "not robust" (i.e. not very tolerant, are a one-shot kind of thing). Some seem to work just fine, others have no joy with it. I don't use it myself, there
are plenty of other methods, but I find it comes down to what you are comfortable/confident/familiar with. Everything has pros and cons, and above all else, I've found that it's my/our assumptions/understandings that tend to be why things go off-course.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Reboot require after install the application from SCCM 2012 deployment

Hi team,
I have a application which is having 2 executable files.
1.exe and 2.exe , reboot is require after install every executable file. Please suggest me how can implement this.
Once reboot done (1st executable file installed and reboot), SCCM should start 2nd executable file.

No, because when the application will be installed it will evaluate the requirements of the deployment types in the order of the deployment type priority. The first deployment type that can install, based on its requirements, will be installed, after
that the application will be considered installed and it won't process any other deployment types.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012 Software Updates not installing (bothh Windows patches & 3rd party updates)

Using SCCM 2012 R2, I am having a problem getting Windows updates to install. Applications published to people work, and basic software installations published to machines for a straight install work. However, both Windows patches and Adobe patches
fail to install on clients. I have imported the Adobe catalog into SCUP, and publish through WSUS. I can see the Adobe patches and Windows patches in SCCM, and can publish them. However, in deployment status out of 4 machines in my test group the Windows patches
installed on 1 and the other 3 are still in Unknown status with category of "Client check passed/Active". However, none of them are installing the patch - they don't even seem to try. All of those are Windows 7 PCs, incidentally. On Adobe patches,
one PC fails and the other 3 machines still sit in Unknown status. Certificates are distributed,
Any ideas what might cause the deployment to not push some targets, even when it's past the deadline?
Thanks,
Andy Maslin

An unknown status means that the clients are not reporting back to ConfigMgr correctly. This is often due to the WUA not pointing at the correct WSUS instance. You can verify this by examining the WUAHandler.log on one of those clients and it will clearly
indicate an issue with this which in turn is often due to a group policy overriding the ConfigMgr behavior.
Jason | http://blog.configmgrftw.com

IE11 SCCM 2012 Deployment - says installed in software center but after re-boot IE8 Remains

Hello,
I have an issue deploying IE11 to the estate, on the pc's the package says installed in software centre but when the users re-boot it's still IE8 on the machine.
The monitoring tool in SCCM 2012 console lists the install as successful.
I have the appenforce log from one of the machiens with the issue:
Starting Install enforcement for App DT "Internet Explorer 11 - Windows Installer (*.msi file)" ApplicationDeliveryType - ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, Revision - 1, ContentPath
- C:\Windows\ccmcache\19, Execution Context - System AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    A user is logged on to the system. AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    Performing detection of app deployment type Internet Explorer 11 - Windows Installer (*.msi file)(ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, revision 1) for system. AppEnforce 28/01/2015
12:30:53 6512 (0x1970)
+++ MSI application not discovered [MSI Product Code: {86DC0963-2A1C-42AB-B664-17C12DBF6C6D}, MSI Product version: ] AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    App enforcement environment:
Context: Machine
Command line: msiexec /i "IE11-Setup-Full.msi" /q
Allow user interaction: No
UI mode: 0
User token: null
Session Id: 4294967295
Content path: C:\Windows\ccmcache\19
Working directory: AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    Prepared working directory: C:\Windows\ccmcache\19 AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Found executable file msiexec with complete path C:\Windows\system32\msiexec.exe AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    Prepared command line: "C:\Windows\system32\msiexec.exe" /i "IE11-Setup-Full.msi" /q /qn AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Valid MSI Package path = C:\Windows\ccmcache\19\IE11-Setup-Full.msi AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    Advertising MSI package [C:\Windows\ccmcache\19\IE11-Setup-Full.msi] to the system. AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    Executing Command line: "C:\Windows\system32\msiexec.exe" /i "IE11-Setup-Full.msi" /q /qn with system context AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
    Working directory C:\Windows\ccmcache\19 AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
    Post install behavior is BasedOnExitCode AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
    Waiting for process 7204 to finish. Timeout = 120 minutes. AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
    Process 7204 terminated with exitcode: 0 AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
    Looking for exit code 0 in exit codes table... AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
    Matched exit code 0 to a Success entry in exit codes table. AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
    Performing detection of app deployment type Internet Explorer 11 - Windows Installer (*.msi file)(ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, revision 1) for system. AppEnforce 28/01/2015
12:31:05 6512 (0x1970)
+++ Discovered MSI application [AppDT Id: ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, Revision: 1, MSI Product code: {86DC0963-2A1C-42AB-B664-17C12DBF6C6D}, MSI Product version: ] AppEnforce
28/01/2015 12:31:05 6512 (0x1970)
++++++ App enforcement completed (11 seconds) for App DT "Internet Explorer 11 - Windows Installer (*.msi file)" [ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3], Revision:
1, User SID: ] ++++++ AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
This is the CAS log:
Saved Content ID Mapping e9dea25d-d24d-4d5c-a767-52068338e976.1, C:\Windows\ccmcache\12 ContentAccess 28/01/2015 10:12:41 6884 (0x1AE4)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:12:57 9832 (0x2668)
Releasing content request {1738FD09-9D1F-4708-9266-A418E9EB049A} ContentAccess 28/01/2015 10:12:57 9832 (0x2668)
All references to Content 1a757176-8b61-4c70-b147-10cdbbfdd0b5.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:12:57
9832 (0x2668)
Saved Content ID Mapping 1a757176-8b61-4c70-b147-10cdbbfdd0b5.1, C:\Windows\ccmcache\13 ContentAccess 28/01/2015 10:12:57 9832 (0x2668)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:13:10 8140 (0x1FCC)
Releasing content request {25035F86-891D-41D3-AD45-F845D8689F88} ContentAccess 28/01/2015 10:13:10 8140 (0x1FCC)
All references to Content cedf67fc-735e-4360-8db4-c8cb5d39663c.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:13:10
8140 (0x1FCC)
Saved Content ID Mapping cedf67fc-735e-4360-8db4-c8cb5d39663c.1, C:\Windows\ccmcache\14 ContentAccess 28/01/2015 10:13:10 8140 (0x1FCC)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:14:12 14352 (0x3810)
Releasing content request {BB6AA813-A4F7-4095-B60D-4441E3D7833D} ContentAccess 28/01/2015 10:14:12 14352 (0x3810)
All references to Content 108336d1-2d2c-4d93-87b3-49d335640f2a.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:14:12
14352 (0x3810)
Saved Content ID Mapping 108336d1-2d2c-4d93-87b3-49d335640f2a.1, C:\Windows\ccmcache\15 ContentAccess 28/01/2015 10:14:12 14352 (0x3810)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:14:30 13956 (0x3684)
Releasing content request {2CA9AC92-0716-49A7-86D4-434B88B4D07B} ContentAccess 28/01/2015 10:14:30 13956 (0x3684)
All references to Content 3fb07321-f1d1-4b71-90f1-233b355b13dd.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:14:30
13956 (0x3684)
Saved Content ID Mapping 3fb07321-f1d1-4b71-90f1-233b355b13dd.1, C:\Windows\ccmcache\16 ContentAccess 28/01/2015 10:14:30 13956 (0x3684)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:15:53 10588 (0x295C)
Releasing content request {47EB54C8-54C9-4FF8-A302-53AF844FA275} ContentAccess 28/01/2015 10:15:53 10588 (0x295C)
All references to Content 9e56a46e-9a6a-42a5-b52b-811231a0ec2e.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:15:53
10588 (0x295C)
Saved Content ID Mapping 9e56a46e-9a6a-42a5-b52b-811231a0ec2e.1, C:\Windows\ccmcache\17 ContentAccess 28/01/2015 10:15:53 10588 (0x295C)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:16:11 12040 (0x2F08)
Releasing content request {F230295F-5136-49C7-B1FF-68697DA4C421} ContentAccess 28/01/2015 10:16:11 12040 (0x2F08)
All references to Content 21ffbbb7-e491-48c1-b515-f5d6dc72f3fd.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:16:11
12040 (0x2F08)
Saved Content ID Mapping 21ffbbb7-e491-48c1-b515-f5d6dc72f3fd.1, C:\Windows\ccmcache\18 ContentAccess 28/01/2015 10:16:11 12040 (0x2F08)
Requesting content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, size(KB) 98073, under context System with priority Medium ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
User policy requested with no user credentials. ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Invalid user. ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Submitted CTM job {7174344D-6757-429C-BA3D-A6FBE9A34DA7} to download Content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 under context System ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Successfully created download request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Location update from CTM for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 and request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download location found 0 - http://USS-LON-SCCMDP1.uss.co.uk/SMS_DP_SMSPKG$/Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download location found 1 - http://USS-LON-SCCMMAN.uss.co.uk/SMS_DP_SMSPKG$/Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download request only, ignoring location update ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download started for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 12268 (0x2FEC)
Download completed for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 under context System ContentAccess 28/01/2015 12:30:52 5228 (0x146C)
Computed hash: F6BEAA17C60572A0751C74DACE26075CC2621CF72F23B09EFEEA4C928A3B0E54 ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Hash verification succeeded for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 downloaded under context System ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Saved Content ID Mapping Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, C:\Windows\ccmcache\19 ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Download succeeded for download request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Error: DeleteDirectory:- Failed to delete Directory C:\Windows\ccmcache\19.BCWork with Error 0x00000002. ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Saved Content ID Mapping Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, C:\Windows\ccmcache\19 ContentAccess 28/01/2015 12:30:53 12104 (0x2F48)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 12:31:05 10856 (0x2A68)
Releasing content request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} ContentAccess 28/01/2015 12:31:05 12104 (0x2F48)
All references to Content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015
12:31:05 12104 (0x2F48)
Saved Content ID Mapping Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, C:\Windows\ccmcache\19 ContentAccess 28/01/2015 12:31:05 12104 (0x2F48)

If the command-line you gave ConfigMgr runs successfully, there's not anything else ConfigMgr can do. Thus the logs above don't add any value. Thus, the issue lies with the MSI. Where did you get it from? Have you tried running it with the /l*v command-line
option to add verbose logging and then reviewed this log file? Have you tried manually testing using the System account (done using psexec) to more closely emulate how ConfigMgr invokes the command-line?
Jason | http://blog.configmgrftw.com | @jasonsandys

After SCCM 2012 deployed--

I have deployed my SCCM 2012 in my company.
Now I find some pcs with window7 very slow.
When I login in with a domain accout it will keep the screen "welcome" for very long time(I have waited for 2 hours).
I can only login in with local administrator account.
I find the network works that I can ping and visit websites but the netcard appears to the "read cross"(some pcs are "connecting circle")
I cannot open the netcard operation that when I right click the netcard it comes "no response" and also when I click the windows update from
the control panel it comes to "no response".
What should I do?
Green Hand In Microsoft.

There's obviously something wrong in your configuration of the environment. Do not blame ConfigMgr until you've done the research on what actually hangs on the login process.
Some simple steps for debugging your bootup and login process can be found here:
http://www.msigeek.com/6231/how-to-enable-system-boot-time-logging-using-process-monitor-tool

SCCM 2012 SP1 Application catalog website

Architecture:
SCCM 2012 SP1 installed on Windows 2012
Application catalog website issue----->
In SMSAWEBSVCSetup.log we found "IIS component ASP net not installed please install it.
Installlation failed Error Code:125"
whereas we have installed ASP.net already (registering ASp. net not supported please review the MS article: "http://support.microsoft.com/kb/2736284 "
Let know me know what could be the cause.

All depending on how/what order you install the IIS components sometimes it's just to reinstall IIS. To me it sounds like the .Net Framework http-activation and non-activation features are missing.
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

SCCM 2012 : Deploying System Center Configuration Manager 2012, Required Desinging Help.

Hi,
I required some one to help designing an SCCM 2012 Solution. I dont have any knowledge on Design Part, This is my first deployment
My goal: Interconnect 3 remote offices and The infrastructure is as follows:
Primary Site Server ( HQ ) : 1000 users
Secondary Site ( Location1) : 2000 Users
Secondary Site ( Location2) : 2000 Users
Link Between Primary and Secondary Sites : 8 MBPS MPLS link
Database will be installed on a remote SQL 2012 Server.
Please let me know is there any tool to generate Design document.
If possible please design and put the Image on the blog.

Why using a remote SQL server? I'd install it locally. There is no tool available.
Just make sure that you are using a standalone primary site (therefore no CAS) and place a secondary at location 1 and 2.
Torsten Meringer | http://www.mssccmfaq.de

Questions Regarding SCCM 2012 Deployment

I have been tasked with finding out if SCCM 2012 Config Manager is capable of the following task:
1) Capturing a User Profile
2) Backing up the profile
3) Wiping the target drive
4) Applying an OS image
5) Restoring backed-up user profile
Is this possible with SCCM 2012?
Let me know, thanks!

Hi,
Yes it is possible, a refresh scenario.. here is a video example
http://www.youtube.com/watch?v=2vkurbe90i4
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012 R2 Office 2013 deploiement 64 bit and 32 bit versions

We have some
Windows 7 64bit os with office 2013 32 bit
also
Windows 7 32bit os with office 2013 32 bit
We need to deploy office 2013 32 bit all over with sccm 2012 r2
what's the best way for the deployment
we also want to be sure to keep all user data for outlook. we don't want to loose that
can I install a 32 bit office and in the setup /admin use uninstall and everything will work

setup.exe /admin is the tool to use when customizing the deployment of Office; especially when deploying through SCCM.
The way I saved user profile data is to set it to Use Existing Profile under Outlook Profile of setup /admin
Yes, I have the default setup behavior box checked so it removes all previous Office version applications.

SCCM 2012 deployed application outside of Maint Window and before Deployment time

Similar Messages

Maybe you are looking for