SCCM 2012 Distribution Point not working properly on a Windows 2012 Server
I have an SCCM SP1 site running on a Server 2008 R2 machine. I had a couple of distribution points, also running on 2008 machines. These served as DPs and PXE boot points. I had no problems with these.
I resently added a Server 2012 machine, and set it up as a DP, with a PXE boot point. The servers is part of a boundary group containing about 1500 clients. I distributed all of packages that are included in my main task sequence, and am able
to PXE boot, and image machines successfully.
However, I am having problems deploying other packages and Windows update packages from this DP. It seems like I am only able to deploy packages that have the "Copy the content in the package to a package share on distribution points" enabled.
If this is not enabled, the client will get the deployment policy, but will never download the package. The "In Progress" tab for the deployment status will just say "Waiting for content".
I have checked the rereqs for IIS on the Server 2012 DP, also checked the firewall. Everything that I see seems to be OK. Are there other things that I can check to determine why this DP isn't working right?
Hello,
According to the following description, this behavior would be normal:
If you configured the option Run program from distribution point on the
Distribution Points page of the Deploy Software Wizard, do not clear the option
Copy the content in this package to a package share on distribution points, because this will make the package unavailable to run from distribution points.
http://technet.microsoft.com/en-in/library/gg682178.aspx
Similar Messages
-
R2 - Distribution Point not working properly
From my main SCCM R2 server, I went to add an additional server with multiple roles.
I can't tell if it's working properly, however.
For example, the Distribution Point role. I've set it as PXE boot, and our Cisco admin has setup an IP helper accordingly, but when I go to boot a client to PXE, it gets an error "Windows failed to start".
File: \Tmp\x86x64{13902C6F-DD5F-4467-88C9-1BAC44DF8287}.bcd
status: 0xc0000098
Info: The windows boot configuration data (BCD) file from the PXE server does not contain a valid operating system entry. Ensure that the server has boot images installed for this architecture.
From Boot Images on the main SCCM server, I had pushed them to the distribution point. Or so I thought? I mean, the "In Progress" tab says the distribution point server name I'm trying to push it to under the "Device" column. Then
Description reads "Distribution Manager Successfully processed package "Boot Image (x64)" (package ID = STL00005)".
But it's been sitting like that for over an hour...
WDS role is also installed on the DP I'm trying to PXE boot from.
Should I disable WDS and then what do I do in SCCM to get it to PXE boot and make sure the boot file for SCCM is on there?Nvm I got it up
I removed the WDS server but not the role of the DP in question
I then removed the roles from the server within SCCM console
Then added back only Distribution Point, then I was able to distribute the boot ups to it again, no errors in logs
PXE boot working fine with task sequences
This is what I ran into after getting PXE to not throw DHCP error
http://www.windows-noob.com/forums/index.php?/topic/8836-problems-with-pxe-and-nothing-in-smspxelog/ -
pointer moves around the page but unable to select using the pointer.each time i had to press backspace to type something on the search box.i cannot get a dropdown box in gmail to sign out because of pointer not working properly.how do i rectify it??????????
You may have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
*Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
*http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
*http://kb.mozillazine.org/Accessibility_features_of_Firefox -
Hi there, Fn + F1 to F12 special features are not working properly in bootcamp Windows
Hi there, I m just wondering recently my keyboard special features keys are not working properly(fn F1 to F12). Is there any solutions for this?? For example I cant switch the brightness with fn F1.. THis is so troublesome.... Please help! thanks
This was working fine in the early stage until recently which is not functioned properly.. ANy way to fix this up?? Thanks!I had tried them...but its all good now... Guess RegPro must be delete my bootcamp item..So I just redownload them n reinstall...all back to normal!...THANKS!
-
Mouse pad not working properly having downloaded Windows 8
Hi, having downloaded Windows 8 to my laptop (HP Spectre xt 13-2000ea) the mouse pad has stopped working properly. The "two finger" page down/up and left/right has stopped working.
I have looked at the mouse settings and it currenlty states the synaptics hardware is installed and working correctly.
Have even gone onto the Synaptics website but have been unable to download something that can correct it. The HP hardware updates page on their support website does not appear to have anything that deals with Windows 8 problems.
Any help much appreciated. ThanksHad exactly the same issue with my HP laptop. The Windows 8 driver installed with the OS works OK but the Synaptics driver in the latest Windows Update will not scroll. I had to uninstall the existing (newest) driver and install the HP Windows 7 driver from this site (an older version) then in Windows Update you have to wait for the Synaptics driver update to be offered (obviously you have to do a manual update and not allow it to install automatically) and then right click on it and select hide update.
-
JRE/JDK 1.3.1_19 Not working with OS Patched Windows 2003 Server DST 2007
Hello:
We are trying to upgrade our 1.3.1_03 application with 1.3.1_19. It worked fine in a machine (WIndows Server 2003) where OS was not patched for DST. However, as far as I could see if the OS is patched the DST compliant java (1.3.1_19) is not working.
I go to the jre/bin and try to do a java -version and I see nothing from OS patched machine.
Non-OS Patched machines, it works and I could see the java version.
Has anybody faced this problem?
Really appreciate any suggestion.
Cheers,
AbdullahHey
came across same problem. but dont know for sure if it is the DST patch that is the problem. if you have come across anything further update on the issue let us know.
Cheers -
Edit/update function not working properly on visual basic 2012
help, i'm working on a update function on my aplication program using visual studio ultimate 2012 VB.
after i fixed the error on my coding, i debug the program with f5. but, when i tried to update the data on the datagridview it doesn't change even thought the messagebox "data has been updated" show up.
how do i fix this problem?
here is the coding for update function:
form1:
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
ClassSiswa.ubahdata(New SqlConnection, (txt_nis.Text), (txt_nisn.Text), (txt_namasiswa.Text), (cmb_kelaminsiswa.Text), (txt_kotalahir.Text), (DTP_siswa.Text), (cmb_agamasiswa.Text), (txt_beratsiswa.Text), (txt_tinggi_badan.Text))
datagridview()
End Sub
Private Sub UpdateDataSiswa()
ClassSiswa.Nis = txt_nis.Text
ClassSiswa.Nisn = txt_nisn.Text
ClassSiswa.Nama_Siswa = txt_namasiswa.Text
ClassSiswa.Tanggal_Lahir = DTP_siswa.Text
ClassSiswa.Jenis_Kelamin = cmb_kelaminsiswa.Text
ClassSiswa.Kota_Lahir = txt_kotalahir.Text
ClassSiswa.Agama = cmb_agamasiswa.Text
ClassSiswa.Tinggi_Badan = txt_tinggi_badan.Text
ClassSiswa.Berat_Badan = txt_beratsiswa.Text
ClassSiswa.Updatesiswa(ClassSiswa.opencon, (txt_nis.Text))
datagridview()
End Sub
classSiswa:
Public Shared Sub ubahdata(ByVal _cn As SqlClient.SqlConnection, ByVal _Nis As String, ByVal _Nisn As String, ByVal _nama_siswa As String, ByVal _jenis_kelamin As String, ByVal _kota_lahir As String, ByVal _tanggal_lahir As String, ByVal _agama As String, ByVal _berat_badan As String, ByVal tinggi_badan As String)
Dim sql As New SqlClient.SqlCommand
sql.Connection = _cn
sql.CommandType = CommandType.Text
sql.CommandText = "update siswa set nis='" & Nis & "',nisn='" & Nisn & "',nama_siswa='" & Nama_Siswa & "',jenis_kelamin='" & Jenis_Kelamin & "' ,kota_lahir='" & Kota_Lahir & "',tanggal_lahir='" & Tanggal_Lahir & "'agama='" & Agama & "'berat_badan='" & Berat_Badan & "',tinggi_badan='" & tinggi_badan & "'"
MessageBox.Show(" Data Telah Diupdate")
ClassSiswa.closecon()
End Sub
Public Shared Sub Updatesiswa(ByVal _Cn As SqlClient.SqlConnection, ByVal _nis As String)
Dim sql As SqlClient.SqlCommand
sql = New SqlClient.SqlCommand
sql.Connection = _Cn
sql.CommandType = CommandType.Text
sql.CommandText = "Update siswa Set nis = '" & Nis & "', nisn = '" & Nisn & "' where nis = '" & _nis & "'"
sql.ExecuteNonQuery()
End SubHello,
A DataGridView knows nothing about the updates done as shown above, you need to update any rows that have changed yourself. For example. lets say I loaded data from a database table into a DataTable, create a BindingSource and assign that DataTable as the
DataSource for the BindingSource. The BindingSource becomes the DataSource of the DataGridView so now when you moved up/down rows in the DataGridView you are changing position in the BindingSource and can read this data via BindingSource.Current by casting
Current to a DataRowView then access the Row property with Field(Of T or SetField(Of T. Couple this will logic to locate rows that may not be the current row and we still can use SetField(Of T)(Col,Value) to update data in the BindingSource which is then immediately
reflected in the DataGridView.
The following is for MS-Access but the same logic applies for SQL-Server database via SqlClient data provider rather than
OleDb data provider.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
but do not reply to forum questions. -
Headphone with mic not working properly on Bootcamp Windows 7
Hey, guys. I have a Macbook Air mid-2012, installed Windows 7 (Bootcamp) and I wish a I could use my Sony Stereo Headset DR-EX12iP with mic for chatting while playing some games. But the microphone isn't working in Windows 7 and I don't know why. I already searched over the internet about an answer but found none. The build-in microphone of MBA is too much sensitive and bother my friends. Just for information, I use the same headset in Mac OS X and it works perfectly with facetime and skype.
I hope somebody can help me out. Thanks!I found this after doing this post: https://discussions.apple.com/thread/3369017?start=0&tstart=0
Apparently there is no good answer for the problem... -
My HP laptop not working properly after installing window 7ultimate 64 bit
This laptop is provided by UP Govt (INDIA). i installed windows ultimate 64 bit,2 days ago and installed all the drivers. But their is two drivers which is giving errors. these are
1)PCI Device- ERROR IS---The drivers for this device are not installed. (Code 28)
Hardware id is
PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C&REV_01
PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C
PCI\VEN_10EC&DEV_5209&CC_FF0000
PCI\VEN_10EC&DEV_5209&CC_FF00
2)Ethernet Controller- ERROR IS--- The drivers for this device are not installed. (Code 28)
Hardware id is
PCI\VEN_10EC&DEV_8136&SUBSYS_3564103C&REV_05
PCI\VEN_10EC&DEV_8136&SUBSYS_3564103C
PCI\VEN_10EC&DEV_8136&CC_020000
PCI\VEN_10EC&DEV_8136&CC_0200
My main problem is that laptop is hangig too much continously. i dont know what is the exact reason and what should i do..Its not heating so their is null chances of heating effect.. I wants to get rid of this hanging problem.Pls provide me link for to download the genuine drivers and solution for this hanging problem..As it was not hangig earlier on Windows 7 home basic (provided by Hp)
This question was solved.
View Solution.Hi:
Here are the links to the drivers you need...
PCI\VEN_10EC&DEV_5209:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&dlc=en&lc=en...
PCI\VEN_10EC&DEV_8136:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100079-2&cc=us&dlc=en&lc=en...
The only suggestion I can offer regarding the notebook not running so good is to download and install the amd chipset drivers from the link below and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064 -
Jan 10 windows 7 patches, plus new firefox update today. Now firefox starts up and shows multiple, stacked window frames and "firefox not responding" messages on top border. after multiple firefox screen flashes (minutes of time), firefox may eventually display normal windows/frames. Selecting new site, firefox goes through same activities. Startup site is www.baynews9.com, then try going to www.cnn.com
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
Hi all,
I use Xcelcius ver 4.0 under Windows 8 (64 bit), but it cannot load canvas and data query. I tried to use Windows 7 (32 bit) but got the same result. What should I do to solve it?
Here is the design captured:
When I run, it's the result (nothing happened):
Need help. Thanks.
Best,
PriHi,
go to file ->Document prperties and check "show loading staus"
prewiew the dashbaors and check in which stage the dashbaord is stucked, perheps you have configured an external connection and you need to configure the corssdomain file
please try also to export the dashbaors to swf format and try to open it using a browser, if you reporduce the problem so please follow the sap kba 1767433
Best regards,
Mohamed AISSA. -
I hit this problem at a customer site and can re-produce it in a simple lab. Lab environment: servers:
1x Server 2012 R2 DC and DNS server - DC1 - 10.0.0.1
1x Server 2012 R2 DirectAccess (DA) server - DA1 - 10.0.0.100
Servers are running "Update" (KB2919355) and following DA hotfixes:
KB2929930
KB2966087
I configured DA (via advanced wizard) as follows:
DA and remote access
AD group
directaccess-webprobehost DNA (A) record pointing to 10.0.0.100
behind an edge device (with a single network adapter)
SSL certificate from enterprise root CA issued to directaccess.contoso.com
NLS on remote server using https://nls.corp.contoso.com
DNS: corp.contoso.com = 10.0.0.1; nls.corp.contoso.com = ""
DNS suffix search list = corp.contoso.com
The DNS server validates successfully in the configuration UI.
With this configuration, I get a static IPv6 address of fd79:7a37:cbd9:3333::1/128 assigned to the NIC
The operations status is all green apart from DNS which displays the following error:
"DNS: Not Working Properly"
Error:
None of the enterprise DNS servers fd79:7a37:cbd9:7777::a00:1 used by DirectAccess clients for name resolution are responding. This might affect DirectAccess client connectivity to corporate resources.
Causes:
Enterprise DNS servers fd79:7a37:cbd9:7777::a00:1 are not responding.
I can, however ping fd79:7a37:cbd9:7777::a00:1 (which is the DNS64 translation of 10.0.0.1)
I would like to know what checks are failing as there are no failures in Event Viewer.
I have come across forums where people have the same issue and fix it by specifying the local IP (in this case 10.0.0.100) as the DNS server, however Richard Hicks has confirmed with me that the DNS server should be set to the DNS server, not the DA server's
IP.Thanks for the post Matt,
ISATAP has been disabled on my DA server, so the results of a "ROUTE PRINT -6" command yields:
===========================================================================
Interface List
12...00 15 5d 01 03 64 ......Microsoft Hyper-V Network Adapter
1...........................Software Loopback Interface 1
14...00 00 00 00 00 00 00 e0 IPHTTPSInterface
===========================================================================
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
12 261 fd79:7a37:cbd9::/48 On-link
14 306 fd79:7a37:cbd9:1000::/64 On-link
14 306 fd79:7a37:cbd9:1000::/128 On-link
14 306 fd79:7a37:cbd9:1000::1/128 On-link
14 306 fd79:7a37:cbd9:1000::2/128 On-link
14 306 fd79:7a37:cbd9:1000:814c:28be:46b5:52c1/128 On-link
12 261 fd79:7a37:cbd9:3333::1/128 On-link
12 261 fd79:7a37:cbd9:7777::/96 On-link
12 261 fe80::/64 On-link
14 306 fe80::/64 On-link
12 261 fe80::20c0:e848:d304:9f01/128 On-link
14 306 fe80::814c:28be:46b5:52c1/128 On-link
1 306 ff00::/8 On-link
12 261 ff00::/8 On-link
14 306 ff00::/8 On-link
===========================================================================
Persistent Routes:
If Metric Network Destination Gateway
0 4294967295 fd79:7a37:cbd9:1000::/64 On-link
0 4294967295 fd79:7a37:cbd9::/48 On-link
0 4294967295 fd79:7a37:cbd9:7777::/96 On-link
=========================================================================== -
Hi !
Internet Information Services (IIS) is getting Disabled automatically on all of our SCCM 2012 Distribution Points.
Please help and share configuration steps.
Thank you.This is not anything ConfigMgr is doing. The cases I've seen similar to this have had a GPO responsible for this behavior from which the site systems needed to be excluded.
Jason | http://blog.configmgrftw.com | @jasonsandys -
IIS Admin Service Disabled on all SCCM 2012 Distribution Points Automatically After few Hours
Hi !
Internet Information Services (IIS) is getting Disabled automatically on all of our SCCM 2012 Distribution Points after few Hours.
Please help and share configuration steps.
Thank you.
Regards,
Faisal Alvi
Regards, Faisal Alvi PPLThat's not something ConfigMgr does. Examine eventlog and see if there are GPOs or whatever is disabling it.
Torsten Meringer | http://www.mssccmfaq.de -
Not working properly Computer Browser service in Windows Server 2012
Good afternoon.
Migrated from 2003 to 2012 Active Directory, all is good, but the service Computer Browser in Windows Server 2012 is not working properly.
Online, there are several hundred computers, one network, no segments. PDC is the Master Browser, it is in my list of all the computers, but gives customers or Backup Browser computers only part, and in alphabetical order, giving the first 70 computers and
all.
Looked packet sniffer:
Microsoft Windows Lanman Remote API Protocol
Entry Count: 70
Available Entries: 251
So on Master Browser shows 251 computer, and the client 70.
If disabled on Windows Server 2012 Service Computer Browser, Master Browser is a computer running Windows Server 2003. He gives all computers.
What is the problem, how to get Windows Server 2012 to work correctly as a Master Browser?More info. I have high lighted in bold where the issue is. This is a massive headache for me at the moment
Frame: Number = 377, Captured Frame Length = 182, MediaType = ETHERNET
- Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-13-72-52-6E-A1],SourceAddress:[00-1E-0B-2B-68-DD]
- DestinationAddress: Dell Inc. 526EA1 [00-13-72-52-6E-A1]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
- SourceAddress: 001E0B 2B68DD [00-1E-0B-2B-68-DD]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
EthernetType: Internet IP (IPv4), 2048(0x800)
- Ipv4: Src = 10.44.46.101, Dest = 10.44.44.14, Next Protocol = TCP, Packet ID = 14025, Total IP Length = 168
- Versions: IPv4, Internet Protocol; Header Length = 20
Version: (0100....) IPv4, Internet Protocol
HeaderLength: (....0101) 20 bytes (0x5)
- DifferentiatedServicesField: DSCP: 0, ECN: 0
DSCP: (000000..) Differentiated services codepoint 0
ECT: (......0.) ECN-Capable Transport not set
CE: (.......0) ECN-CE not set
TotalLength: 168 (0xA8)
Identification: 14025 (0x36C9)
- FragmentFlags: 16384 (0x4000)
Reserved: (0...............)
DF: (.1..............) Do not fragment
MF: (..0.............) This is the last fragment
Offset: (...0000000000000) 0
TimeToLive: 128 (0x80)
NextProtocol: TCP, 6(0x6)
Checksum: 0 (0x0)
SourceAddress: 10.44.46.101
DestinationAddress: 10.44.44.14
- Tcp: Flags=...AP..., SrcPort=65372, DstPort=NETBIOS Session Service(139), PayloadLen=128, Seq=1910965363 - 1910965491, Ack=580319796, Win=252 (scale factor 0x8) = 64512
SrcPort: 65372
DstPort: NETBIOS Session Service(139)
SequenceNumber: 1910965363 (0x71E70473)
AcknowledgementNumber: 580319796 (0x2296FA34)
- DataOffset: 80 (0x50)
DataOffset: (0101....) 20 bytes
Reserved: (....000.)
NS: (.......0) Nonce Sum not significant
- Flags: ...AP...
CWR: (0.......) CWR not significant
ECE: (.0......) ECN-Echo not significant
Urgent: (..0.....) Not Urgent Data
Ack: (...1....) Acknowledgement field significant
Push: (....1...) Push Function
Reset: (.....0..) No Reset
Syn: (......0.) Not Synchronize sequence numbers
Fin: (.......0) Not End of data
Window: 252 (scale factor 0x8) = 64512
Checksum: 0x6F65, Disregarded
UrgentPointer: 0 (0x0)
TCPPayload: SourcePort = 65372, DestinationPort = 139
- Nbtss: SESSION MESSAGE, Length =124
PacketType: SESSION MESSAGE, 0(0x00)
- Flags: Add 0 to Length
Reserved: (0000000.)
Extension: (.......0)Add 0 to Length
Length: 124(0x7C)
- SMB: C; Transaction, Remote Administration Protocol, FileName = \PIPE\LANMAN
Protocol: SMB
Command: Transaction 37(0x25)
- NTStatus: 0x0, Facility = FACILITY_SYSTEM, Severity = STATUS_SEVERITY_SUCCESS, Code = (0) STATUS_SUCCESS
Code: (................0000000000000000) (0) STATUS_SUCCESS
Facility: (...0000000000000................) FACILITY_SYSTEM
Customer: (..0.............................) NOT Customer Defined
Severity: (00..............................) STATUS_SEVERITY_SUCCESS
- SMBHeader: Command, TID: 0x2001, PID: 0x276C, UID: 0x3801, MID: 0x0140
- Flags: 24 (0x18)
LockAndRead: (.......0) LOCK_AND_READ and WRITE_AND_UNLOCK NOT supported (Obsolete) (SMB_FLAGS_LOCK_AND_READ_OK)
NoAck: (......0.) An ACK response is needed (SMB_FLAGS_SEND_NO_ACK[only applicable when SMB transport is NetBIOS over IPX])
Reserved_bit2: (.....0..) Reserved (Must Be Zero)
CaseInsensitive: (....1...) SMB paths are case-insensitive (SMB_FLAGS_CASE_INSENSITIVE)
Canonicalized: (...1....) Canonicalized File and pathnames (Obsolete) (SMB_FLAGS_CANONICALIZED_PATHS)
Oplock: (..0.....) Oplocks NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK)
OplockNotify: (.0......) Notifications NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK_NOTIFY_ANY)
FromServer: (0.......) Command - SMB is being sent from the client (SMB_FLAGS_SERVER_TO_REDIR)
- Flags2: 51207 (0xC807)
KnowsLongFiles: (...............1) Understands Long File Names (SMB_FLAGS2_KNOWS_LONG_NAMES)
KnowsEas: (..............1.) Understands extended attributes (SMB_FLAGS2_KNOWS_EAS)
SmbSecuritySignature: (.............1..) Security signatures enabled (SMB_FLAGS2_SMB_SECURITY_SIGNATURE)
Compressed: (............0...) Compression Disabled for REQ_NT_WRITE_ANDX and RESP_READ_ANDX (SMB_FLAGS2_COMPRESSED)
SecuritySignatureRequired: (...........0....) Security Signatures are NOT required (SMB_FLAGS2_SMB_SECURITY_SIGNATURE_REQUIRED)
Reserved_bit5: (..........0.....) Reserved (Must Be Zero)
IsLongName: (.........0......) DO NOT use Long File Names (SMB_FLAGS2_IS_LONG_NAME)
Reserved_bits7_9: (......000.......) Reserved (Must Be Zero)
ReparsePath: (.....0..........) NOT a Reparse path (SMB_FLAGS2_REPARSE_PATH)
ExtendedSecurity: (....1...........) Aware of extended security (SMB_FLAGS2_EXTENDED_SECURITY)
Dfs: (...0............) NO DFS namespace (SMB_FLAGS2_DFS)
Paging: (..0.............) Read operation will NOT be permitted unless user has permission (NO Paging IO) (SMB_FLAGS2_PAGING_IO)
NTStatus: (.1..............) Using 32-bit NT status error codes (SMB_FLAGS2_NT_STATUS)
Unicode: (1...............) Using UNICODE strings (SMB_FLAGS2_UNICODE)
PIDHigh: 0 (0x0)
SecuritySignature: 0x0
Unused: 0 (0x0)
TreeID: 8193 (0x2001)
ProcessID: 10092 (0x276C)
UserID: 14337 (0x3801)
MultiplexID: 320 (0x140)
- CTransaction:
WordCount: 14 (0xE)
TotalParameterCount: 32 (0x20)
TotalDataCount: 0 (0x0)
MaxParameterCount: 8 (0x8)
MaxDataCount: 4200 (0x1068)
MaxSetupCount: 0 (0x0)
Reserved: 0 (0x0)
- Flags: Do NOT disconnect TID
Disconnect: (...............0) Do NOT disconnect TID
NoResponse: (..............0.) Server response to the client
Reserved: (00000000000000..) Reserved
Timeout: 5000 milli sec(s)
Reserved2: 0 (0x0)
ParameterCount: 32 (0x20)
ParameterOffset: 92 (0x5C)
DataCount: 0 (0x0)
DataOffset: 0 (0x0)
SetupCount: 0 (0x0)
Reserved3: 0 (0x0)
ByteCount: 61 (0x3D)
- RemoteAPIBuffer:
- FileName: \PIPE\LANMAN
- Align: 1 Bytes
AlignBytes: Binary Large Object (1 Bytes)
Name: \PIPE\LANMAN
Pad1: Binary Large Object (2 Bytes)
- RAPRequest: NetServerEnum2 Request, InfoLevel = 1, SV_TYPE_ALL: All in NSNET
RAPOpcode: NetServerEnum2
- ParameterDescriptor: WrLehDz; 4 send, 1 receive parameter
Param: (W) WORD (send parameter, 16 bit integer)
Param: (r) Receive buffer (format in data descriptor) (receive data, 0 bit integer)
Param: (L) Receive buffer length (send/receive parameter, 16/16 bit integer)
Param: (e) Entries read (receive data, 0 bit integer)
Param: (h) WORD (receive parameter, 16 bit integer)
Param: (D) DWORD (send parameter, 32 bit integer)
Param: (z) ASCIIZ (send parameter, 8 bit integer)
Param: ASCII NUL (string terminator)
- DataDescriptor: B16BBDz; data bytes send: 0, receive: 34
- Datum: (B) BYTE[16] (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Digit: 1
Digit: 6
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (D) DWORD (receive data, 32 bit integer)
Datum: (z) ASCIIZ* (receive data offset, 32 bit integer)
Datum: ASCII NUL (string terminator)
- NetServerEnum2: SV_TYPE_ALL: All in NSNET
InfoLevel: (1) SERVER_INFO_1
ReceiveBufferSize: 4200 (0x1068)
- ServerType: SV_TYPE_ALL: All
Workstation: (...............................1) All workstations
Server: (..............................1.) All computers with the server service running
Sqlserver: (.............................1..) All running Microsoft SQL Server
DomainCtrl: (............................1...) All primary domain controllers
DomainBakctrl: (...........................1....) All backup domain controllers
TimeSource: (..........................1.....) All Time servers
AFP: (.........................1......) All Apple File Protocol servers
Novell: (........................1.......) All Novell servers
DomainMember: (.......................1........) All LAN Manager 2.x domain members
PrintqServer: (......................1.........) All print servers
DialinServer: (.....................1..........) All dial-in servers
ServerUnix: (....................1...........) All Unix/Xenix servers
NT: (...................1............) All Windows NT workstations or servers
WFW: (..................1.............) All Windows for Workgroups servers
ServerMFPN: (.................1..............) All Microsoft File and Print for NetWare servers
ServerNT: (................1...............) All non-domain controller servers
PotentialBrowser: (...............1................) All servers that can run the browser service
BackupBrowser: (..............1.................) All backup browsers
MasterBrowser: (.............1..................) All master browsers
DomainMaster: (............1...................) All domain master browsers
Reserved1: (..........11....................)
Windows: (.........1......................) All Windows 95 or later
DFS: (........1.......................) All DFS root servers
ClusterNT: (.......1........................) All NT Clusters
Terminalserver: (......1.........................) All Terminal Servers
ClusterVSNT: (.....1..........................) All NT Cluster Virtual Server Names
DCE: (....1...........................) AllIBM DSS (Directory & Security Services)
Reserved2: (...1............................)
AlternateXport: (..1.............................) Return list for alternate transport
LocalListOnly: (.1..............................) Return local list only
DomainEnum: (1...............................) Enumerate primary domain
Domain: NSNET
Then the reply;
Frame: Number = 378, Captured Frame Length = 1514, MediaType = ETHERNET
+ Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-1E-0B-2B-68-DD],SourceAddress:[00-13-72-52-6E-A1]
+ Ipv4: Src = 10.44.44.14, Dest = 10.44.46.101, Next Protocol = TCP, Packet ID = 27036, Total IP Length = 1500
+ Tcp: Flags=...A...., SrcPort=NETBIOS Session Service(139), DstPort=65372, PayloadLen=1460, Seq=580319796 - 580321256, Ack=1910965491, Win=253 (scale factor 0x8) = 64768
+ Nbtss: SESSION MESSAGE, Length =2013
+ SMB: R; Transaction, Remote Administration Protocol
- RAPResponse: NetServerEnum2 Response, Count = 31
Win32ErrorCode: 0x00000000 - ERROR_SUCCESS - The operation completed successfully.
Converter: 2251 (0x8CB)
- NetServerEnum2: Count = 31
EntriesReturned: 31 (0x1F)
EntriesAvailable: 31 (0x1F)
+ NetServerInfo1: APOLLO
+ NetServerInfo1: ARTEMIS
+ NetServerInfo1: ASKLEPIOS
+ NetServerInfo1: CASTOR
+ NetServerInfo1: DCC4503-131L
+ NetServerInfo1: DCC4503-155L
+ NetServerInfo1: DCC4503-157L
+ NetServerInfo1: DCC4503-161L
+ NetServerInfo1: DCC4503-171L
+ NetServerInfo1: DCC4503-172L
+ NetServerInfo1: DCC4503-175L
+ NetServerInfo1: DCC4503-177L
+ NetServerInfo1: DCC4503-183L
+ NetServerInfo1: DCC4503-184L
+ NetServerInfo1: DCC4503-185L
+ NetServerInfo1: DCC4503-188L
+ NetServerInfo1: DCC4503-196L
+ NetServerInfo1: DCC4503-197L
+ NetServerInfo1: DCC4503-199L
+ NetServerInfo1: DCC4503-202L
+ NetServerInfo1: DCC4503-203L
+ NetServerInfo1: DCC4503-205L
+ NetServerInfo1: DCC4503-210L
+ NetServerInfo1: DCC4503-213L
+ NetServerInfo1: DCC4503-219L
+ NetServerInfo1: DCC4503-220L
+ NetServerInfo1: DCC4503-228L
+ NetServerInfo1: DCC4503-233L
+ NetServerInfo1: DCC4503-234L
+ NetServerInfo1: DCC4503-236L
+ NetServerInfo1: DCC4503-241L
StringData: Binary Large Object (586 Bytes)
Maybe you are looking for
-
Re: 32 Bit ODBC Driver for Oracle 11g 11.2.0.1.0
Hi, Were you able to resolve the problem with these troubleshooting measures ? Please let me know since i am facing similar issues like yours. I am using a Windows 7 64 bit and from QTP installed on this machine , i am trying to connect to Oracle da
-
IPhoto issue when making albums
While trying to make an album with blurb I encountered an issue with iPhoto. While tusing the share function to create an album (Full of the pictures I want to use in the blurb album) it 'quit unexpectedly due to core media plug in'. Do I have to rei
-
I CAN'T BELIEVE: iSub and 10.4.4,there's still the issue!
so...it's from April that we iSub (USB plugged) and Mac users are waiting for this. No updates solved our issue,not 10.4.1,not 10.4.2,not 10.4.3 10.4.4. they say that is improveet the USB hardware support...and the iSub?? whay do we have still the vo
-
OS won't shut down - spinner goes around and around
For the last month or so my Mini will not shut down (or restart). I am on the latest rev. of SL (10.6.8). It gets to the blue screen and then the spinning wheel goes around and around until I have to turn it off by the power button. I found much olde
-
ScopeBox, does it work? More accurate than FCP scopes?
In the absence of real video scopes, how accurate is this? Or should I just stick to FCP scopes, which I know are not accurate....