SCCM 2012 - DP error

HI All,
I am trying to enable DP on the remote machine cross firewall.
I get the below error seems should be blocked by firewall. I have opened
445/80/135 between DP and primary site server. Is there anything I have to do for the below error. Please help
Log:
Distribution Manager failed to find a drive on distribution point "["Display=\\XXXX.XX.NET\"]MSWNET:["SMS_SITE=XXX"]\\XXXX.XX.NET\" on system "XXXX.XX.NET" which has characteristics appropriate for storing shared folders
used by distribution point.
Possible cause: Windows NT distribution points might not have at least one available NTFS drive.
Solution: Verify that there is at least one NTFS drive with enough free disk space to store the packages.
Regards, Pratap

Possible cause is the network. Please refer to the post by Jason to open the ports between remote DP and Site Server.
Juke Chou
TechNet Community Support

Similar Messages

  • SCCM 2012 SP1 errors when downloading updates

    Currently using SCCM 2012 SP1 with CU2 and I am having some update download issue with Automatic Deployment Rules.
    The Environment is:
      Server 2008 R2
      SCCM 2012 SP1 CU2 (Upgraded from SCCM 2012 CU2)
    I created an Automatic Deployment Rule for Adobe Flash. Since I was having the same issue with Adobe Reader, when I published via SCUP to WSUS I chose not to sign the updates.
    After publishing to WSUS I then sync SCCM, I see the updates and then in the ADR I had it download the updates and I see this error:
    Authentication of file C:\Windows\TEMP\CABDEC5.tmp failed, error 0x800b0004 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 3712 (0x0E80)
    ERROR: DownloadContentFiles() failed with hr=0x80073633 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 6876 (0x1ADC)
    Failed to download the update from internet. Error = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
    Failed to download ContentID 16845337 for UpdateID 16841530. Error code = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
    Now the funny thing is if I go to the update itself within update group that Flash is a member I can right click it and choose download and the error doesn't occur.
    I observed that the UNC path for ADR Adobe flash, when the rule is ran, is populated with folders that have a name something like 44738297895427890.1 or 423154325378u867234789.1. I have come to realize that those are failed downloads. So for the
    heck of it I then right clicked the update itself and chose download and it downloaded without issue. Now I'm guessing that when I chose to download directly from the update maybe the system is getting the update from adobe and not from wherever the rule was
    trying to get it from.  I then see the .1 removed from the directory name and there are updates within them.
    Just for clarity here are the steps I go through from SCUP to Syncing...
    Log in to WSUS server
    Run SCUP as administrator
    Get notified there are updates from Adobe and let SCUP download updates
    Find the updates the specify the following publishing options
    Full Content
    Sign all software updates with a new publishing certificate .... (Is this necessary by the way?)
    Then click Next
    After that's done I then go to SCCM Manager Console and go to Software Updates and right click to Synchronize them.
    After that's done then I run the ADR for Adobe Flash and when it goes to download the updates that's when the error occurs.
    What am I missing?
    Also, while I wait for help I just recently added the WSUS SCUP certificate to the SCCM server to see if by chance that fixes stuff. If it does then I'll post the results of adding the certificate to the SCCM server.
    One other thing, is there a way to delete updates? When I was having this issue in the past, I went in to SCUP I marked the updates as expired and then deleted the updates. Went to SCCM and synchronized the updates and they went from not expired to expired
    then I waited, maybe 30 days or so before I could add the updates back in.
    Thanks for the help!

    Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
    Have you seen the note at the bottom of this page about this error?
    http://technet.microsoft.com/en-us/library/bb932193.aspx
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • SCCM 2012 An error has occurred during report processing (rsProcessingAborted)

    I have this error on some reports i try to run in my customer
    i rebuild all the Database and add the security rule for the report database
    i gave the user Logon locally rights ,(and run as a services) also run as sysadmin
    here is the error
    Microsoft.Reporting.WinForms.ReportServerException
    An error has occurred during report processing. (rsProcessingAborted)
    Stack Trace:
       at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
       at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
       at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
       at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
       at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
       at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
    here is a log srsrp.log:
    System.Web.Services.Protocols.SoapException: The policy for '#######\IT Department' user or group is not valid. The role assignment is either empty, specifies a user or group name that is already used in an existing role assignment for the current item,
    or specifies duplicate roles for the same user or group. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidPolicyDefinitionException: The policy for '#######\IT Department' user or group is not valid. The role assignment is either empty, specifies
    a user or group name that is already used in an existing role assignment for the current item, or specifies duplicate roles for the same user or group.~   at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetPolicies(String Item,
    Policy[] Policies)~   at Microsoft.ReportingServices.WebServer.ReportingService2005.SetPolicies(String Item, Policy[] Policies)

    ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
    the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
    on the reporting web the system role and check the all settings give him full permissions
    do i make my self clear ? (my English is not so bright )
    now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
    Microsoft.Reporting.WinForms.ReportServerException
    An error has occurred during report processing. (rsProcessingAborted)
    Stack Trace:
       at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
       at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
       at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
       at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
       at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
       at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
    this poor gay have the same problem
    An error has occurred during report processing. (rsProcessingAborted)

  • Sccm 2012 r2 error setup cannot compile mof file tasksequenceprovider.mof

    Am getting this error during SCCM 2012 R2 installation on the same server which has SQL 2012 with SP1. "setup cannot compile mof file tasksequenceprovider.mof". Any help?

    Hi,
    The following blog introduced a tool scans winodws module which may help find out the missing file.
    http://blogs.technet.com/b/configurationmgr/archive/2010/01/05/the-configuration-manager-service-pack-install-guide.aspx

  • MBAM - SCCM 2012 Reports - Error: the 'MBAM Policy' view does not exist

    Hi
    I have installed MBAM with SCCM 2012 integration. A single server install with SQL server 2012. Mostly it has gone smoothly and laptops are being encrypted and pins stored and recoverable. The problem I have is reports are not showing. I get the following
    error message.
    "Error: the 'MBAM Policy' view does not exist"
    Any ideas why this is? I get the same error message with all 4 reports.

    Hi Slycy,
    There is another thread that seems to be a similar issue
    here that may help you. The last post in particular has a number of steps that you can use to speed up creation of the views:
    Just for future reference, there are quite a few things that have to happen before the view is created. This is merely how CM works.
    Make MBAM MOF changes
    Select TPM spec version in hardware inventory
    Install MBAM CM Integration feature
    Perform a machine policy refresh cycle on a client to get the MOF changes that need to be inventoried
    Perform hardware inventory
    Update MBAM Supported Computers collection membership.  The machine should appear if it meets the criteria
    Run another machine policy refresh on the client so that the Configuration Baseline will come down
    Make sure that the MBAM agent has woken up once
    Evaluate the Configuration Baseline
    The MBAM views should be created now.
    You don't have to do this for every machine, but this is the process to speed it up.  If you let CM do it, it could take over a week before the view is created the first time, depending on when Hardware inventory runs, etc.
    Hope this helps,
    David

  • SCCM 2012 Client Error Failed to create registration request body. Error: 0x80070057

    Hi,
    While installing sccm 2012 R2 Client on server 2008 R2 ClientManagerStartup.log shows below error
    Failed to create registration request body. Error: 0x80070057
    Kiran

    Torsten is right, please post the entire ccmsetup.log and client.msi.log.
    Daniel Ratliff | http://www.PotentEngineer.com

  • SCCM 2012 install error. Error = 1722

    I am trying to install SCCM 2012 and i got theese errors:
    ERROR: Failed to get the buffer size for LookupAccountName. Error = 1722
    and
    ERROR: Failed to get SID for user (NT Service\MSSQLSERVER)
    and the install wizard says "Failed to create SQL server certificate."

    Please do not doublepost - I just spend some time answering the same question in the General forum -
    http://www.configurationmanager2012.com/Configuration-Manager-02.html
    Kent Agerlund | My blogs: blog.coretech.dk/kea and
    SCUG.dk/ | Twitter:
    @Agerlund | Linkedin: Kent Agerlund

  • SCCM 2012 Setup error when setting SQL connection info "Network Path Was Not Found"

    Hello.
    I'm facing an issue during CCM 2012 SP1 Beta Setup on step "DB INFORMATION"
    My lab is set like that:
    1x Front-end WS 2012 rtm "CCM Install on it" (Fresh install = no features installed)
    1x Back-end WS 2012 rtm SQL Server 2012 SP1 (I don't know if this is supported).
    On the sql Side there is already a first instance with SCVMM 2012 SP1(beta) environment that work well.
    A second dedicated instance is ready for CCM install.
    Named Pipes enabled , TCP/IP Enabled
    Firewall rules for 1433 and 4022 are enabled on the Domain profile ,other profiles are disabled.
    Instance Service is running with a domain account
    Everything is published in AD (delegations for computer account), Schema Prep already done manually.
    I'm Able to resolve dns name of the SQL server on the CCM VM and telnet 4022 + 1433 ports.
    For the finish here is the end of Setup Wizard logs:
    Exception rethrown at [0]:
       à System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
       à System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
       à Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
       à Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
       à Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
       à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       à System.Windows.Controls.Button.OnClick()
       à System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
       à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       à System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
       à System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
       à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       à System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       à System.Windows.Input.InputManager.ProcessStagingArea()
       à System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
       à System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
       à System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
       à System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       à System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       à MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       à MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       à System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
       à System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
    14/12/2012 08:21:06: ConfigMgrSetupWizard Information: 1 : Creating SQL connection to database SCCM\master on server SQL001.IT-DEPLOYMENT.LAB.
    14/12/2012 08:21:53: ConfigMgrSetupWizard Error: 1 : Exception message: [Le chemin réseau n’a pas été trouvé.
    ], Exception details: [System.IO.IOException: Le chemin réseau n’a pas été trouvé.
    Server stack trace:
       à Microsoft.Win32.RegistryKey.Win32ErrorStatic(Int32 errorCode, String str)
       à Microsoft.Win32.RegistryKey.OpenRemoteBaseKey(RegistryHive hKey, String machineName)
       à Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.GetSqlConnection(String databaseName, String serverName, Boolean encrypt)
       à Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.CheckSqlConnection(String serverName, String instanceName)
       à System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
       à System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
    Exception rethrown at [0]:
       à System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
       à System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
       à Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
       à Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
       à Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
       à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       à System.Windows.Controls.Button.OnClick()
       à System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
       à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       à System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
       à System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
       à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       à System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       à System.Windows.Input.InputManager.ProcessStagingArea()
       à System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
       à System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
       à System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
       à System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       à System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       à MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       à MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       à System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
       à System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
    Please help me; I'm driving crazy.
    Kévin KISOKA - MCTS Exchange Configuring, MCTS Hyper-V Server Virtualization

    3 Steps are neccessary:
    1. Make sure the Windows Firewall Service on the SQL Server is running and set to automatic
    2. Add the SQL EXE as a Program Exception to the Firewall on the SQL Server:
    To add a program exception to the firewall using the Windows Firewall item in Control Panel.
    - On the Exceptions tab of the Windows Firewall item in Control Panel, click
    Add a program.
    - Browse to the location of the instance of SQL Server that you want to allow through the firewall, for example
    C:\Program Files\Microsoft SQL Server\MSSQL11.<instance_name>\MSSQL\Binn, select
    sqlservr.exe, and then click Open
    - Click OK.
    From http://technet.microsoft.com/en-us/library/cc646023.aspx
    3. The last step neccessary, on the SQL Server, is to set File and Printer Sharing "on". When this is off, the following error occurs: "Network Path was not found"

  • Sccm 2012 SP1 - Error 0x80070002 / 0x80004005

    Hello,
    First off all sorry for my bad english speaking ! I'll try to be as clear as possible :)
    I want to build an image from a basic win7 captured image (that part was already done) adding some apps in a first capture and next (if the first one wanted to work a day...) another capture to run all the updates.
    Here a capture of the Build and capture task sequence :
    So, the task failed at this step : "Capture the reference Machine".
    I've think that it was due to the account used but when I make the "verify" test it is a success.
    Here the log (server name replaced by xxxxxxxxxx) :
    New/Changed ActualConfig policy instance(s) : 0    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    Unlocked ActualConfig successfully    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    Unlocked policy transaction lock successfully    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    Raising event:
    instance of CCM_PolicyAgent_SettingsEvaluationComplete
        ClientID = "GUID:4808EED8-2CA2-4B4B-AAAD-C0154AD92DFD";
        DateTime = "20150416070446.089000+000";
        PolicyNamespace = "\\\\xxxxx\\root\\ccm\\policy\\machine\\actualconfig";
        ProcessID = 2932;
        ThreadID = 1852;
        TSManager    16/04/2015 09:04:46    1852 (0x073C)
    Successfully submitted event to the Status Agent.    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    End TS policy evaluation    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    Policy evaluation initiated    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    g_TSManager.Run(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,725)    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    ::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,261)    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    RegQueryValueExW failed for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    GetTsRegValue() failed. 0x80070002.    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    End program:     TSManager    16/04/2015 09:04:46    1852 (0x073C)
    Error Task Sequence Manager failed to execute task sequence. Code 0x80004005    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    Sending error status message    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    MP server http://xxxxxxxxxxxxxxxx. Ports 80,443. CRL=false.    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    Setting authenticator    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    Set authenticator in transport    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    Sending StatusMessage    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    Setting message signatures.    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    Setting the authenticator.    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    CLibSMSMessageWinHttpTransport::Send: URL: xxxxxxxxxxxxxxxx:80  CCM_POST /ccm_system/request    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    Error. Received 0x80072ee7 from WinHttpSendRequest.    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    unknown host (gethostbyname failed)    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    hr, HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8936)    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    sending with winhttp failed; 80072ee7    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    Will retry in 5 second(s)    TSManager    16/04/2015 09:04:46    1852 (0x073C)
    Retrying...    TSManager    16/04/2015 09:04:51    1852 (0x073C)
    CLibSMSMessageWinHttpTransport::Send: URL: xxxxxxxxxxxxxxxx:80  CCM_POST /ccm_system/request    TSManager    16/04/2015 09:04:51    1852 (0x073C)
    Error. Received 0x80072ee7 from WinHttpSendRequest.    TSManager    16/04/2015 09:04:51    1852 (0x073C)
    unknown host (gethostbyname failed)    TSManager    16/04/2015 09:04:51    1852 (0x073C)
    hr, HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8936)    TSManager    16/04/2015 09:04:51    1852 (0x073C)
    sending with winhttp failed; 80072ee7    TSManager    16/04/2015 09:04:51    1852 (0x073C)
    Will retry in 11 second(s)    TSManager    16/04/2015 09:04:51    1852 (0x073C)
    Retrying...    TSManager    16/04/2015 09:05:03    1852 (0x073C)
    CLibSMSMessageWinHttpTransport::Send: URL: xxxxxxxxxxxxxxxx:80  CCM_POST /ccm_system/request    TSManager    16/04/2015 09:05:03    1852 (0x073C)
    Error. Received 0x80072ee7 from WinHttpSendRequest.    TSManager    16/04/2015 09:05:03    1852 (0x073C)
    unknown host (gethostbyname failed)    TSManager    16/04/2015 09:05:03    1852 (0x073C)
    hr, HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8936)    TSManager    16/04/2015 09:05:03    1852 (0x073C)
    sending with winhttp failed; 80072ee7    TSManager    16/04/2015 09:05:03    1852 (0x073C)
    Will retry in 22 second(s)    TSManager    16/04/2015 09:05:03    1852 (0x073C)
    Retrying...    TSManager    16/04/2015 09:05:25    1852 (0x073C)
    CLibSMSMessageWinHttpTransport::Send: URL: xxxxxxxxxxxxxxxx:80  CCM_POST /ccm_system/request    TSManager    16/04/2015 09:05:25    1852 (0x073C)
    Error. Received 0x80072ee7 from WinHttpSendRequest.    TSManager    16/04/2015 09:05:25    1852 (0x073C)
    unknown host (gethostbyname failed)    TSManager    16/04/2015 09:05:25    1852 (0x073C)
    hr, HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8936)    TSManager    16/04/2015 09:05:25    1852 (0x073C)
    sending with winhttp failed; 80072ee7    TSManager    16/04/2015 09:05:25    1852 (0x073C)
    Will retry in 44 second(s)    TSManager    16/04/2015 09:05:25    1852 (0x073C)
    Retrying...    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    CLibSMSMessageWinHttpTransport::Send: URL: xxxxxxxxxxxxxxxx:80  CCM_POST /ccm_system/request    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    Error. Received 0x80072ee7 from WinHttpSendRequest.    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    unknown host (gethostbyname failed)    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    hr, HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8936)    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    sending with winhttp failed; 80072ee7    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    End of retries    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    Send (pReply, nReplySize), HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,1952)    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    failed to send the request    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    DoRequest (sReply, false), HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,4050)    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    Failed to send status message (80072ee7)    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    smStatusMessage.Send(), HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,5394)    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    Error calling message lib Send(). Code 0x80072ee7    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    Non fatal error 0x80072ee7 in sending task sequence execution status message to MP    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    Finalize logging request ignored from process 2932    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    Waiting for CcmExec service to be fully operational    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    CcmExec service is up and fully operational    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    Access handle will be read from _SMSTSActiveRequestHandle    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    Access handle: {4A5E656D-DDA8-4700-BF81-E13CB4B85EA9}    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    Attempting to release request using {4A5E656D-DDA8-4700-BF81-E13CB4B85EA9}    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    CoCreateInstance succeeded    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136)    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    ReleaseRequest failed with error code 0x80004005    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    Task Sequence Manager could not release active TS request. code 80004005    TSManager    16/04/2015 09:06:09    1852 (0x073C)
    Process completed with exit code 2147500037    TSMBootstrap    16/04/2015 09:06:09    2364 (0x093C)
    Exiting with return code 0x80004005    TSMBootstrap    16/04/2015 09:06:09    2364 (0x093C)
    Process completed with exit code 2147500037    OSDSetupHook    16/04/2015 09:06:09    1360 (0x0550)
    Task sequence completed 0x80004005    OSDSetupHook    16/04/2015 09:06:09    1360 (0x0550)
    Waiting for command shell to complete.    OSDSetupHook    16/04/2015 09:06:09    1440 (0x05A0)
    Any idea welcomed... thank you in advance !
    Solear

    Hi,
    You should first make sure that the UNC path you provided to create your Wim is correct and also that your account has enough permissions to write in the share.
    The verify option check if the password is correct but I'm not sure that it checks permissions.
    Mickael,
    My technet galleries contributions :
    ConfigMgr driver injector
    SCCM Collection splitter
    ConfigMgr TS Tools
    Customize WinPE images with powershell

  • Client Inactive--SCCM 2012 R2-ERROR

    Hi all, I've been troubled days .. please help. 
    see the following link
    http://www.windows-noob.com/forums/index.php?/topic/9131-help-please-do-not-install-secondary-site-clients-i-reinstalled-the-site-and-nothing/?p=34889

    Hi,
    For client with no site information, you need to make sure your boundary group match client IP or AD site.
    Some more troubleshooting links:
    http://deployos.com/blog/2012/10/01/using-and-troubleshooting-client-push-in-sccm
    http://eskonr.com/2010/11/sccm-client-installation-troubleshooting-steps-check-list/
    http://blogs.technet.com/b/configurationmgr/archive/2009/08/10/troubleshooting-issues-where-clients-are-not-reporting.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SCCM 2012 Deploy --- Error = The software change returned error code 0x87D00324(-2016410844).

    Deployment to the client is successful but the error reported within Clients "SCCM Software Center"  
    The software change returned error code 0x87D00324(-2016410844).
    Also States on "Status" Past Due - Will be Retired"
    Can't figure this one out and I did some googling with no success in finding a solution?
    I am running an Adobe Flash install (.EXE)
    Any help or direction would be greatly appreciated
    RF

    Hi,
    Thank you for your response
    ""Wow6432Node is not valid on x86 systems."""
    Yes, that I am aware of that.....Windows on Windows, for running x86 apps on x64 Windows<o:p></o:p>
    When I first created the detection method I had only created the "WoW" Check
    for Flash value in the reg, which was running against both x86 & x64 Win 7
    systems, and forgot to include the x64 check/, either case, the error appeared
    on the WOW check. Presently I have 2 "Detection Clauses" one for x86
    and the second clause is x64 ( non WOW Path), and still receive the same erorrs
    on both x86 & x64 systems. ( and x64 system have both reg entries since Win 7 has both x86 & x64 versions of IE)
    Looking at the registry of an x64 Win 7 system I find the Adobe Flash registry entry is
    located in both Wow6432Node and also in the x64 sections of the reg.....<o:p></o:p>
    """"Also, why use the default value? I doubt there's anything in there (the default value is the
    value display in a key in regedit with the name of
    "@").""""<o:p></o:p>
    When Default Value is selected the boxes/options below that allow for more detailed
    information to be entered when performing the "reg check"? This is
    where I had been able to enter specific Build/Version to look for, Flash
    11.4.402.265, so that if it does not discover the build # it will proceed with
    the install.....<o:p></o:p>
    I figured having the option to check for Build/Version # would omit SCCM reinstalling on
    systems that have build 11.4.402.265 already?<o:p></o:p>
    From what I understand is that Adobe Flash x64 installs both versions x86 & x64 since Win 7 has both IE
    x86 & IE x64 bit versions by default, and this would explain the Wow6432Node reg
    entries and the true x64 reg entries in both locations when installing.
    Overall, I am thinking I may be heading in the wrong direction in resolving this, as x86 & x64 versions install on the systems, so this tells me it is detecting when / what needs to be installed, the issue seems to be how it reports back after installing......
    Looking further, I view the Content Status Page, and there reporting info in Asset Detail under [Success]  all others { / In Progresss / Error /Unknown } has no info......
    If this helps provide further details.....
    Thanks
    Regards,
    Ron
    RF

  • SCCM 2012 R2 - Error with Task Sequence relating to Multicast issues

    Using a copy of a working task sequence; we have deployed a new v.6.3.9600.16384 boot image with latest Intel I217-LM driver.
    The task sequence runs perfectly fine, then stops after running "Setup Windows and Configmgr" task with an 0x80004005 error.
    Upon examination of the smsts.log file there appears to be a problem with multicast; can anyone help?
    Below is the extract of the smsts.log error:

    Found this in the smsts.log;
    <![LOG[==============================[ OSDSetupWindows.exe ]===========================]LOG]!><time="09:52:42.977+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="setupwindows.cpp:1627">
    <![LOG[Command line: "OSDSetupWindows.exe"]LOG]!><time="09:52:42.977+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="setupwindows.cpp:1628">
    <![LOG[Installing BOOTMGR bootsector]LOG]!><time="09:52:42.993+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="bootsector.cpp:73">
    <![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="09:52:43.009+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="commandline.cpp:228">
    <![LOG[Set command line: "bootsect.exe" /NT60 SYS /MBR]LOG]!><time="09:52:43.009+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="commandline.cpp:731">
    <![LOG[Executing command line: "bootsect.exe" /NT60 SYS /MBR]LOG]!><time="09:52:43.009+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="commandline.cpp:827">
    <![LOG[Process completed with exit code 0]LOG]!><time="09:52:45.510+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="commandline.cpp:1123">
    <![LOG[ResolveSource flags: 0x00000000]LOG]!><time="09:52:45.510+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="resolvesource.cpp:3201">
    <![LOG[SMSTSPersistContent: . The content for package LTC00011 will be persisted]LOG]!><time="09:52:45.510+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="resolvesource.cpp:3212">
    <![LOG[The package LTC00011 is found locally in the cache C:\_SMSTaskSequence\Packages\LTC00011]LOG]!><time="09:52:45.510+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="resolvesource.cpp:3242">
    <![LOG[!Directory::Exists(sNormalizedPath), HRESULT=800700b7 (e:\nts_sccm_release\sms\framework\core\ccmcore\path.cpp,156)]LOG]!><time="09:52:45.510+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="path.cpp:156">
    <![LOG[Setting hive location to "C:\_SMSTaskSequence\OSD\Vista\Windows\System32\SMI\Store\Machine"]LOG]!><time="09:52:45.510+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="smiinterface.cpp:812">
    <![LOG[Loading existing answer file "C:\_SMSTaskSequence\unattend.xml"]LOG]!><time="09:52:45.865+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="xmlanswerfile.cpp:578">
    <![LOG[Adding "C:\_SMSTaskSequence\drivers" to plug and play driver path.]LOG]!><time="09:52:45.943+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="xmlanswerfile.cpp:1894">
    <![LOG[Getting namespace "Microsoft-Windows-PnpCustomizationsWinPE" for architecture "amd64"]LOG]!><time="09:52:45.943+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="smiinterface.cpp:222">
    <![LOG[Writing configuration information to C:\_SMSTaskSequence\unattend.xml]LOG]!><time="09:52:45.943+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="smiinterface.cpp:860">
    <![LOG[Successfully saved configuration information to C:\_SMSTaskSequence\unattend.xml]LOG]!><time="09:52:45.959+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="smiinterface.cpp:925">
    <![LOG[Successfully initialized driver information]LOG]!><time="09:52:45.959+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="setupwindows.cpp:1205">
    <![LOG[Command line for extension .EXE is "%1" %*]LOG]!><time="09:52:45.959+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="commandline.cpp:228">
    <![LOG[Set command line: "C:\_SMSTaskSequence\Packages\LTC00011\SOURCES\SETUP.EXE" "/unattend:C:\_SMSTaskSequence\unattend.xml" /noreboot]LOG]!><time="09:52:45.959+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924"
    file="commandline.cpp:731">
    <![LOG[Executing command line: "C:\_SMSTaskSequence\Packages\LTC00011\SOURCES\SETUP.EXE" "/unattend:C:\_SMSTaskSequence\unattend.xml" /noreboot]LOG]!><time="09:52:45.959+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924"
    file="commandline.cpp:827">
    <![LOG[Process completed with exit code 31]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="commandline.cpp:1123">
    <![LOG[Windows Setup completed with exit code 31]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="setupwindows.cpp:1526">
    <![LOG[ReleaseSource() for C:\_SMSTaskSequence\Packages\LTC00011.]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="resolvesource.cpp:3564">
    <![LOG[reference count 1 for the source C:\_SMSTaskSequence\Packages\LTC00011 before releasing]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="resolvesource.cpp:3574">
    <![LOG[Released the resolved source C:\_SMSTaskSequence\Packages\LTC00011]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="resolvesource.cpp:3612">
    <![LOG[exitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\setupwindows\setupwindows.cpp,440)]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="setupwindows.cpp:440">
    <![LOG[Windows setup failed, code 31]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="3" thread="1924" file="setupwindows.cpp:440">
    <![LOG[setup.run(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\setupwindows\setupwindows.cpp,1650)]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="0" thread="1924" file="setupwindows.cpp:1650">
    <![LOG[Exiting with code 0x80004005]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="OSDSetupWindows" context="" type="1" thread="1924" file="setupwindows.cpp:1696">
    <![LOG[Process completed with exit code 2147500037]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="commandline.cpp:1123">
    <![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="instruction.cxx:804">
    <![LOG[Failed to run the action: Setup Windows and ConfigMgr.
    Unspecified error (Error: 80004005; Source: Windows)]LOG]!><time="10:00:45.306+480" date="03-25-2014" component="TSManager" context="" type="3" thread="1048" file="instruction.cxx:895">
    <![LOG[MP server http://Darwin.ltcharity.org.uk. Ports 80,443. CRL=false.]LOG]!><time="10:00:45.321+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5881">
    <![LOG[Setting authenticator]LOG]!><time="10:00:45.337+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5903">
    <![LOG[Set authenticator in transport]LOG]!><time="10:00:45.353+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:7734">
    <![LOG[Sending StatusMessage]LOG]!><time="10:00:45.434+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:4023">
    <![LOG[Setting message signatures.]LOG]!><time="10:00:45.436+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1295">
    <![LOG[Setting the authenticator.]LOG]!><time="10:00:45.444+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1325">
    <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: Darwin.ltcharity.org.uk:80  CCM_POST /ccm_system/request]LOG]!><time="10:00:45.444+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:8604">
    <![LOG[Request was successful.]LOG]!><time="10:00:45.476+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:8939">
    <![LOG[Set a global environment variable _SMSTSLastActionRetCode=-2147467259]LOG]!><time="10:00:45.476+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:668">
    <![LOG[Set a global environment variable _SMSTSLastActionSucceeded=false]LOG]!><time="10:00:45.476+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:668">
    <![LOG[Clear local default environment]LOG]!><time="10:00:45.476+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:807">
    <![LOG[Let the parent group (Setup Operating System) decides whether to continue execution]LOG]!><time="10:00:45.491+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="instruction.cxx:1004">
    <![LOG[Let the parent group (Install Operating System) decide whether to continue execution]LOG]!><time="10:00:45.491+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="instruction.cxx:254">
    <![LOG[The execution of the group (Install Operating System) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)]LOG]!><time="10:00:45.491+480" date="03-25-2014" component="TSManager" context="" type="3" thread="1048" file="instruction.cxx:217">
    <![LOG[Failed to run the last action: Setup Windows and ConfigMgr. Execution of task sequence failed.
    Unspecified error (Error: 80004005; Source: Windows)]LOG]!><time="10:00:45.491+480" date="03-25-2014" component="TSManager" context="" type="3" thread="1048" file="engine.cxx:213">
    <![LOG[MP server http://Darwin.ltcharity.org.uk. Ports 80,443. CRL=false.]LOG]!><time="10:00:45.491+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5881">
    <![LOG[Setting authenticator]LOG]!><time="10:00:45.522+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5903">
    <![LOG[Set authenticator in transport]LOG]!><time="10:00:45.522+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:7734">
    <![LOG[Sending StatusMessage]LOG]!><time="10:00:45.539+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:4023">
    <![LOG[Setting message signatures.]LOG]!><time="10:00:45.539+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1295">
    <![LOG[Setting the authenticator.]LOG]!><time="10:00:45.539+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1325">
    <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: Darwin.ltcharity.org.uk:80  CCM_POST /ccm_system/request]LOG]!><time="10:00:45.539+480" date="03-25-2014" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:8604">
    <![LOG[Request was successful.]LOG]!><time="10:00:45.570+480" date="03-25-2014" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:8939">
    <![LOG[Executing command line: X:\windows\system32\cmd.exe /k]LOG]!><time="10:03:20.975+480" date="03-25-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:860">
    So according to this log "Windows setup failed, CODE 31", Which then produced the more generic 8004005 error.

  • SCCM 2012 R2 - Error when marking Service Request as Complete from remote console

    If I attempt to Complete a SR from a remote console I receive the following error. Marking as Complete from the console installed on the Management Server works as expected. Has anyone encountered this ?
    Date: 22/09/2014 18:37:18
    Application: System Center Service Manager
    Application Version: 7.5.3079.0
    Severity: Error
    Message: Method not found: 'Void Microsoft.EnterpriseManagement.UI.SdkDataAccess.ConsoleCommand.VerifyDataItemClass(Microsoft.EnterpriseManagement.UI.DataModel.IDataItem, System.String, System.Guid, System.String, System.String, System.String)'.
    System.MissingMethodException: Method not found: 'Void Microsoft.EnterpriseManagement.UI.SdkDataAccess.ConsoleCommand.VerifyDataItemClass(Microsoft.EnterpriseManagement.UI.DataModel.IDataItem, System.String, System.Guid, System.String, System.String, System.String)'.
       at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ConsoleTaskHandler.DoTask(IList`1 navigationNodes, NavigationModelNodeTask task, List`1 parameterList)
       at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ConsoleTaskHandler.DoTask(IList`1 navigationNodes, NavigationModelNodeTask task)
       at Microsoft.EnterpriseManagement.ConsoleFramework.WindowJobRecord.ExecuteBackgroundJob(Object sender, ConsoleJobEventArgs eventargs)
       at Microsoft.EnterpriseManagement.ServiceManager.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
    Ian Moran

    Thanks. Although the Console version was showing the same on both the server and users workstations I think what we had was UR3 installed on the servers and UR2 installed on the workstations. Installing UR3 on all workstations seems to have fixed the issue
    (not all have tested)
    Ian Moran

  • SCCM 2012 - Replication error

    Hi Experts,
    I have installed secondary server successfully and in monitoring - under database replication - it says link is active.
    But when I run the replication analyser, I got the below issue triggered. Please help
    Log:
    SqlInstanceName="XXXX.XXXXX.NET\SCCMINS"  ></IsTransmissionStuck>
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Getting results of rule: IsTransmissionStuck execution
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Loading result Xml from rule:IsTransmissionStuck
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : rule:IsTransmissionStuck has some dependent rules
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Working with parent rule:IsTransmissionStuck -> dependent rule:DoesBrokerCertificateMatch
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Appending result xml
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Rule IsTransmissionStuck result: passed.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Rule: IsTransmissionStuck executed SUCCESSFULLY. Adding it to success list.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Running rule: IsBrokerDisabled.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Running rule: <IsBrokerDisabled siteCode="BUL" sqlServerName="XXXX.XXXXX.NET\SCCMINS"  ></IsBrokerDisabled>
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Getting results of rule: IsBrokerDisabled execution
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Loading result Xml from rule:IsBrokerDisabled
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : rule:IsBrokerDisabled does not have any dependent rules
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Rule IsBrokerDisabled result: passed.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Rule: IsBrokerDisabled executed SUCCESSFULLY. Adding it to success list.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Running rule: IsBrokerDisabled.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Running rule: <IsBrokerDisabled siteCode="HND" sqlServerName="XXXXX.XXXXX.NET\CONFIGMGRSEC"  ></IsBrokerDisabled>
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Getting results of rule: IsBrokerDisabled execution
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Loading result Xml from rule:IsBrokerDisabled
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : rule:IsBrokerDisabled does not have any dependent rules
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Rule IsBrokerDisabled result: passed.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Rule: IsBrokerDisabled executed SUCCESSFULLY. Adding it to success list.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Running rule: IsSysCommitTabError.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Running rule: <IsSysCommitTabError SqlInstanceName="XXXX.XXXXX.NET\SCCMINS"  ></IsSysCommitTabError>
    24/03/2014 12:16:34: ReplicationLinkAnalysis Verbose: 1 : The last time sys.syscommittab error was checked at 03/24/2014 12:01:00.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Verbose: 1 : Reading registry key SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL\SCCMINS on XXXX.XXXXX.NET.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Verbose: 1 : Reading registry key SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.SCCMINS\MSSQLServer\Parameters\SQLArg0 on XXXX.XXXXX.NET.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Verbose: 1 : Reading registry key SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.SCCMINS\MSSQLServer\Parameters\SQLArg1 on XXXX.XXXXX.NET.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Verbose: 1 : SQL's error log file for SQL instance XXXX.XXXXX.NET\SCCMINS is F:\DATA\SCCMINS\MSSQL11.SCCMINS\MSSQL\Log\ERRORLOG.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Scanning SQL error log files for the string [Error: 2601,].
    24/03/2014 12:16:34: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
    \\XXXX.XXXXX.NET\F$\DATA\SCCMINS\MSSQL11.SCCMINS\MSSQL\Log\ERRORLOG.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
    \\XXXX.XXXXX.NET\F$\DATA\SCCMINS\MSSQL11.SCCMINS\MSSQL\Log\ERRORLOG.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Verbose: 1 : Done checking the file
    \\XXXX.XXXXX.NET\F$\DATA\SCCMINS\MSSQL11.SCCMINS\MSSQL\Log\ERRORLOG since all other lines in the file are earlier than last check date and time.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Getting results of rule: IsSysCommitTabError execution
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Loading result Xml from rule:IsSysCommitTabError
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : rule:IsSysCommitTabError does not have any dependent rules
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Rule IsSysCommitTabError result: passed.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Rule: IsSysCommitTabError executed SUCCESSFULLY. Adding it to success list.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Running rule: IsSysCommitTabError.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Running rule: <IsSysCommitTabError SqlInstanceName="XXXXX.XXXXX.NET\CONFIGMGRSEC"  ></IsSysCommitTabError>
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : No last check date or time. Checking all error logs.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Verbose: 1 : Reading registry key SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL\CONFIGMGRSEC on XXXXX.XXXXX.NET.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Verbose: 1 : Reading registry key SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQLServer\Parameters\SQLArg0 on XXXXX.XXXXX.NET.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Verbose: 1 : Reading registry key SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQLServer\Parameters\SQLArg1 on XXXXX.XXXXX.NET.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Verbose: 1 : SQL's error log file for SQL instance XXXXX.XXXXX.NET\CONFIGMGRSEC is C:\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Information: 1 : Scanning SQL error log files for the string [Error: 2601,].
    24/03/2014 12:16:34: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
    \\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.
    24/03/2014 12:16:34: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
    \\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
    \\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.1.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
    \\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.1.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
    \\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.2.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
    \\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.2.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
    \\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.3.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
    \\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.3.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
    \\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.4.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
    \\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.4.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
    \\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.5.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
    \\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.5.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
    \\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.6.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
    \\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.6.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Information: 1 : Completed replication link analysis thread.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Information: 1 : Enumerating failed rules list.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Information: 1 : Enumerating succeeded rules list.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Information: 1 : Returning Executed rules.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Error: 1 : Could not find file '\\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.6'.
    24/03/2014 12:16:35: ReplicationLinkAnalysis Error: 1 : System.IO.FileNotFoundException: Could not find file '\\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.6'.
    File name: '\\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.6'
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
       at Microsoft.ConfigurationManager.ReplicationLinkAnalyzer.IsSysCommitTabError.ReadFileContent(String sqlErrorLogFile)
       at Microsoft.ConfigurationManager.ReplicationLinkAnalyzer.DataStoreWrapper.ReadFileContent(AccountInfo accountInfo, String serverName, String fileName)
       at Microsoft.ConfigurationManager.ReplicationLinkAnalyzer.IsSysCommitTabError.ScanLogFilesForError(Boolean checkAllLogs, DateTime checkDate, String sqlErrorLogPath, String comparisonString, DateTime& matchingLineDate)
       at Microsoft.ConfigurationManager.ReplicationLinkAnalyzer.IsSysCommitTabError.Run()
       at Microsoft.ConfigurationManager.ReplicationLinkAnalyzer.ReplicationLinkAnalysisEngine.RunRulesInBackground(Object sender, DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    Regards, Pratap

    Hi,
    Could you see the ERRORLOG.6 in \\XXXXX.XXXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log? Replication Link Analyzer cannot fix this issue?
    How about rcmctrl.log on the site server?
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SCCM 2012 - PXE error

    Hi Experts,
    I need some clarity on PXE boot
    1. My PXE point (Secondary Server) has IP subnet with 10.171.X.X and I am trying to build the machine from the next building which is 10.6.X.X series. When I PXE boot I get the below error
    PXE-E53 - No Boot Filename received
    PXE-MOF- Exiting Intel Boot Agent
    Do I need to enable IP helper on the switch level to PXE boot?
    2. WDS is configured to respond to all client computer and from boot image properties "Deploy from PXE enabled distribution point is enabled" Please help
    Regards, Pratap

    1. Yes. PXE as a protocol is limited to a broadcast/subnet boundary. Enabling IP helpers is the preferred way to direct the PXE broadcasts across subnets.
    2. I don't understand what the issue. Please provide more information, define your issue, and your expectations.
    Jason | http://blog.configmgrftw.com

  • SCCM 2012 - Driver Error

    Hi,
    I am trying to import C720 esprimo desktop drivers and I am trying to update the boot.wim x64. When I do that boot.wim got updated but it is not updating the distribution point. ANy help please
    Error: Some driver(s) can not be imported successfully. See following details.
    　Success: The following driver(s) were imported:
    Intel(R) 82579LM Gigabit Network Connection
    Intel(R) Ethernet Connection I217-LM
    Intel(R) PRO/1000 PT Dual Port Network Connection
    Intel(R) 82567LM-3 Gigabit Network Connection
    Intel(R) 82575EB Gigabit Network Connection
    Intel(R) 82580 Gigabit Network Connection
    Intel(R) 82567LM-2 Gigabit Network Connection
    Intel(R) 82576 Virtual Function
    　Success: Add drivers to the following packages:
    Esprimo C720
    　Success: Packages will be updated on distribution points.
    Esprimo C720
    　Success: Add drivers to the following boot images:
    Boot image (x64)
    Boot image (x86)
    　Error: All boot image(s) can not be updated on distribution points.
    Errors
    Boot image (x64) - The SMS Provider reported an error.Boot image (x86) - The SMS Provider reported an error.
    Regards, Pratap

    I tested the LAN driver after building the OS using Standalone media which is working fine.
    The problem I got when I try using PXE boot. I got the below from smsts
    log:
    <![LOG[Executing: X:\sms\bin\x64\smstftp.exe -i 10.6.13.7 get \SMSTemp\2014.03.27.15.26.28.0002.{473BA5EB-5AB9-4136-B944-212F1655C540}.boot.var X:\sms\data\variables.dat]LOG]!><time="15:56:54.656+480" date="03-27-2014" component="TSPxe" context=""
    type="0" thread="916" file="tspxe.cpp:177">
    <![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="15:56:54.687+480" date="03-27-2014" component="TSPxe" context="" type="0" thread="916" file="commandline.cpp:228">
    <![LOG[Set command line: "X:\sms\bin\x64\smstftp.exe" -i 10.6.13.7 get \SMSTemp\2014.03.27.15.26.28.0002.{473BA5EB-5AB9-4136-B944-212F1655C540}.boot.var X:\sms\data\variables.dat]LOG]!><time="15:56:54.687+480" date="03-27-2014" component="TSPxe" context=""
    type="0" thread="916" file="commandline.cpp:731">
    <![LOG[Executing command line: "X:\sms\bin\x64\smstftp.exe" -i 10.6.13.7 get \SMSTemp\2014.03.27.15.26.28.0002.{473BA5EB-5AB9-4136-B944-212F1655C540}.boot.var X:\sms\data\variables.dat]LOG]!><time="15:56:54.687+480" date="03-27-2014" component="TSPxe"
    context="" type="1" thread="916" file="commandline.cpp:827">
    <![LOG[Process completed with exit code 1]LOG]!><time="15:57:41.745+480" date="03-27-2014" component="TSPxe" context="" type="1" thread="916" file="commandline.cpp:1123">
    <![LOG[Succesfully removed firewall rule for Tftp]LOG]!><time="15:57:41.747+480" date="03-27-2014" component="TSPxe" context="" type="0" thread="916" file="fwopen.cpp:146">
    <![LOG[uExitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\server\pxe\tspxe\tspxe.cpp,185)]LOG]!><time="15:57:41.747+480" date="03-27-2014" component="TSPxe" context="" type="0" thread="916" file="tspxe.cpp:185">
    <![LOG[Failed to download pxe variable file. Code(0x00000001)]LOG]!><time="15:57:41.747+480" date="03-27-2014" component="TSPxe" context="" type="3" thread="916" file="tspxe.cpp:185">
    <![LOG[PxeGetPxeData failed with 0x80004005]LOG]!><time="15:57:41.747+480" date="03-27-2014" component="TSPxe" context="" type="3" thread="916" file="tsmbootstraputil.cpp:1415">
    <![LOG[HRESULT_FROM_WIN32(dwError), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1416)]LOG]!><time="15:57:41.747+480" date="03-27-2014" component="TSPxe" context="" type="0" thread="916"
    file="tsmbootstraputil.cpp:1416">
    <![LOG[TSMBootstrapUtil::PxeGetPxeData(&bPxeBooted, sVariablesFile, sPxePasswd), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2623)]LOG]!><time="15:57:41.747+480" date="03-27-2014" component="TSPxe"
    context="" type="0" thread="916" file="tsmediawizardcontrol.cpp:2623">
    <![LOG[oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078)]LOG]!><time="15:57:41.747+480" date="03-27-2014" component="TSPxe" context="" type="0"
    thread="916" file="tsmbootstrap.cpp:1078">
    <![LOG[Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1183)]LOG]!><time="15:57:41.747+480" date="03-27-2014" component="TSPxe"
    context="" type="0" thread="916" file="tsmbootstrap.cpp:1183">
    <![LOG[Exiting with return code 0x80004005]LOG]!><time="15:57:41.747+480" date="03-27-2014" component="TSPxe" context="" type="1" thread="916" file="tsmbootstrap.cpp:1195">
    <![LOG[hMap != 0, HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentscope.cpp,515)]LOG]!><time="15:57:41.747+480" date="03-27-2014" component="TSPxe" context="" type="0" thread="916" file="environmentscope.cpp:515">
    <![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,337)]LOG]!><time="15:57:41.747+480" date="03-27-2014" component="TSPxe" context="" type="0" thread="916" file="environmentlib.cpp:337">
    <![LOG[this->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,549)]LOG]!><time="15:57:41.747+480" date="03-27-2014" component="TSPxe" context="" type="0" thread="916" file="environmentlib.cpp:549">
    <![LOG[Execution complete.]LOG]!><time="15:57:41.747+480" date="03-27-2014" component="TSBootShell" context="" type="1" thread="848" file="bootshell.cpp:690">
    Regards, Pratap

Maybe you are looking for

  • Unable to open/edit Business rules v9.3

    Hello, I am unable to open/edit existing business rules in v9.3 in the AAS console. I get an error message: Exception occured: Please check your log for details. Business rules have been working without issues for months. I checked the easserver.log

  • IPad Air open links in apps

    How to make the iPad open a link (from a website, from an email, from another app, from anywhere) in the correct app? i.e. open in Etsy, Pinterest, Instagram...

  • Quicktime 7.5.5 Crashes (iMovie 6.0.4 related?)

    i have been having major problems with quicktime 7.5 -- and now with the upgrade to 7.5.5. i have no problem using the iMovie expert settings to export a QT .mov that can be uploaded and viewed perfectly through Firefox, but when i try and open the f

  • Customer Tool use in production

    Dear all, in my project scenario, customer will order for a tool to plant. tool will be purchased by plant with different material number. then plant will bill the tool to customer. logically after billing, only billing doc will be send to customer b

  • Problems with 17" 2011 MBP optibay sata speeds for SSD.

    I have a 17" early 2011 MBP.  I noticed that the optibay SATA is only 3GB/S.  Since I need to set up an internal RAID with SSD (SATA III 6Gb/S), and newer versions are now supporting this (I was under the impression that my earlier one would too), wh