SCCM 2012: F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image": F8 works in winPE

F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image"
F8 option turned on in the boot image.
F8 debug window works in Windows PE.
F8 debug window does not show-up on F8 key-press after entering the 'Currently installed Windows 7 Image" all the way to the end of the task sequence.
But after a 'Restart Step' (and if F8 was pressed) the Task Sequence tends to pause indefinitely as if the
F8 debug screen is open in the background.
I am using SCCM 2012 SP1 (CU 1 is
not an option at the moment).
Any ideas as to how I could get the debug F8 option back?

There have been a couple reported occurrences of this (or something similar) to my knowledge with no resolution in the forums. Your best bet may be to open a case with CSS.
Also note that if you were going to do a CU, why would you pick CU1 instead of CU4? And, can I ask why it's not an option out of curiosity?
Jason | http://blog.configmgrftw.com

Similar Messages

Menu is not visible after logging into the portal(SSO)...please help.

Hello Experts,
I am facing one EP issue...its like once the user logs in to the portal through SSO...he is not able to see any menu on the left side of the page. Actually there is a Detailed Navigation Tab on Left side which contains links to other servers.
Since there is no Detailed navigation tab on his page this particular user is not able to navigate to other servers...
Please letme know where to look for as I am very very new to EP...please give in your valuable inputs...
Regards,
Jignesh.

Hi Joshi,
Check ur detailed navigation is open or closed
goto cont adminportal content-- go to ur default frame work page-- desktop innerpage-- open --- see detailed navigation iview is checked for visible or not
hope this helps u
Regards
Krishna.

When i open itunes, it gives me a message "the folder itunes is on a locked disk or you do not have write permissions for this folder" i am the only user and it was working a week ago whats wrong with it? it will not open itunes

when i open itunes, it gives me a message "the folder itunes is on a locked disk or you do not have write permissions for this folder" i am the only user and it was working a week ago whats wrong with it? it will not open itunes

Hi lvdmerwe!
I have two articles here for you that should be able to help you troubleshoot this issue further:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Take care, and thanks for visiting the Apple Support Communities.
-Braden

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any availabl

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any available updates or reinstall IPhoto.
I tried installing Iphoto it said it was downloaded successfully. I still get the error messafe, and can not open any photos of program, any suggestions?

What version of iPhoto do you have on the Macbook and on the iMac? What systems are you running on the Macbook and on the iMac?
Does the message only refer to "a problem" or does it specify what it is?
Happy Holidays

My ipod touch 4 won't sync or register on my computer. The cord works, the usb port works, and when I plug my ipod into the wall to charge it work, but when i plug it to the computer nothing, not even charging. P.S. worked before I updated it.

The cord works, theusb port works, and when I plug my ipod into the wall charger it works, but when I plug it into the computer, nothing, not even charging. P.S. it worked before I updated it to iOS 6.1.5

You do have iTunes 10.7 or later on the computer, right?
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
Regards.

Tecra M5: finger print sensor is not working properly since a drink was spilt into the keyboard

My finger print sensor is not working properly since a drink was spilt into the keyboard. When booting up, it automatically "fails" 5 times in a row (without any attempts to swipe a finger), then defaults to password entry to boot the machine's hard drive.
This is not a problem and all i want to do is disable the finger print sensor, but cannot work out how to do this. I've tried uninstalling the driver, which I seemed to do without any problems, but when rebooting, the sensor still seems active, and still goes through the same process.
Everything else works fine and this is just a minor niggle, but I'd like to remove the annoyance of it beeping at me 5 times while it does its thing!
Can anyone tell me how I completely disable it?
Thank you.

Have you removed the fingerprint software? If yes check if in device manager is listed some unknown device. Please post the result.
Maybe you can try to disable this unknown device and it will not be recognized as new hardware every time when you start the notebook.

My htc-phone provides internet facility through cable/blue-tooth to my windows notebook. It does not have a wifi or hotspot facility. Can the same internet through blue-tooth work for ipad2.

My htc-phone provides internet facility through cable/blue-tooth to my windows notebook. My htc-phone does not have a wifi or hotspot facility. Can the same internet through blue-tooth work for ipad2?

No, the bluetooth profile in the iPad does not provide that
capacity. Can your netbook be a wifi transmitter? If yes,
you can connect to the internet via htc-phone and pass
the connection to the netbook which will connect via wifi
to iPad. I am not familiar with the hardware in netbooks nor
the capabilities of Windows, so what I am suggesting looks
good in theory but the reality may not allow it. Still worth
checking into.

My MacBook Air keeps asking me for my yahoo password; which when correctly entered will not allow me into the account. iPad and iPhone both working on the same password/account.

my MacBook Air keeps asking me for my YAHOO password; which when correctly entered will not allow me into the account. iPad and iPhone both working on the same password.

I've got automatic downloads turned off and I tried signing out and in via the settings and still keeps asking me for an apple id.
It doesn't do it continuously, it'll just pop up randomly ... if the phone is just sitting there it may ask for my apple id and regardless of whether I press cancel or enter my password nothing happens .. it may be another 2mins, 5mins, 15mins but eventually it'll just randomly pop up and ask me again. It does accept my password though because I tried entering an incorrect password to see what happens and it gives me the error saying it's incorrect, so when I enter the correct one in the box disappears and it accepts it as I say, but only for so long before it pops up again.

I can not use my mouse or keyboard when I am trying to install windows via boot camp

Please can you help!
I can not use my mouse or keyboard when I am trying to install windows via boot camp

Starting a couple of days ago my mouse and keyboard stopped working suddenly.
How are they connected? In my case they are wireless and their receiver is plugged into my USB hub. After an update I found the OS inexplicably not recognizing my USB hub and hence any devices which were plugged into it. My fix was to
plug the receiver into a different USB port (so I could use the mouse and keyboard; otherwise I would have had to use the OSK via Touch or pen.) Once I had normal access into my machine again I used Device Manager to remove all USB controller and
hubs (including hidden ones) and I then shut down, disconnected all USB devices and powered back up, this time using only Touch to get going. Once the OS had settled down I started plugging stuff back in the way that I wanted it to be recognized.
If I didn't have Touch I would have had to have left the wireless receiver plugged in both places which I assume would be OK. I have no idea why updates have such a catastrophic effect for USB devices.
Robert Aldwinckle

When I insert an SD card into the iMac nothing happens. It worked fine until today, I double clicked on the card icon on the desk top and it disappeared! Any suggestions?

When I insert an SD card into the iMac nothing happens. It worked until today, when I double clicked on the SD card icon on the desktop and then it disappeared! Cannot find in "Finder". iPhoto does not open upon inserting card. Reformatted card with device (camera). Used Time machine to restart computer before the double click occurence...did not lhelp. Any suggestions?

Have a look in Finder Preferences: Click on the desktop, Finder>Finder Preferences.General tab - is there a tick in "External Disks'? If not, tick it.

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
Thanks,
eidnolb

My magic stopped working after I updated the system to Windows 7 SP1

It all goes well under the Mac OS X 10.6.
But,to Windows 7, the partial function went down after I updated the system.
Here's my problem.
The function of rolling in the middle area of Mouse didn't work.
I've tried to reinstall the Bootcamp 3.1, but nothing help.
So I wonder if there's anyone who can help me out.
P.S. Poor English, expected that you can understand.

Did the Windows 7 disc have SP1 on it or did you download it from Windows Update/Microsoft site. I had Windows 7 64-bit on my system and I went to the Microsoft site to download SP1 and then installed it (I had issues in the past on different PC getting service packs to download and install from Windows Update). After it installed Windows was fine I had no issues. When I was finished with using the system for the day I went to Start>Shutdown to turn it off. Then the next day I turned it on and booted into Windows and it asked for my password. I went to type it in and nothing showed in the box. I went to use the built-in mouse in the MacBook Pro and it would not move. This had happened after I redid the entire hard drive (Mac OS X and Windows) after having some other Windows issues I was having. After I found out the issues were not on the Mac OS X side I put Windows back on and the drivers for it that was on the Mac OS X disc and used Apple Software Update for Windows to get the 3.2 drivers. I don't think Apple systems and Windows7 using SP1 is compatible. If you are able to in some way or form to go to Control Panel and view the installed Windows Updates, click on the one for Service Pack 1 and then click on uninstall and remove it. I take care of the updates on another system for someone else on an HP using Winsows 7 64-bit and after what happened to me I am not putting Service Pack 1 on theres.

My interface -- buttons (back, forward, reload), firefox tab, groups, etc. -- does not look like the sample on your "firefox features" page. ("Groups" seems not to function at all.) I'm running the current firefox 4 download on Windows XP. Can you help?

My interface -- buttons (back, forward, reload), firefox tab, groups, etc. -- does not look like the sample on your "firefox features" page. ("Groups" seems not to function at all.) I'm running the current firefox 4 download on Windows XP. Can you help?

cor-el
Thank you for your swift reply. I don't know that this has helped me, as I've reached my level of tolerance for fooling with this annoying little problem - for today anyway. It has been going on since I "up" graded to Firefox 4. My wife is running 3.6.x on her laptop with none of this foolishness. As BLASPHEMOUS as it may sound, I've gone back to IE for the time being even though I don't like it 1000th as much as I do Firefox.
Not just to rant here, I would say that I found a way to put some buttons on the right side of the toolbar that immediately gave me permission to "back, forward, and reload", but upon closing the browser and going out for dinner with the wife, I find on return that not only are those buttons NOT still on the toolbar, but I can't find them anymore. I think they were in "add-ons" found under I believe Add-On Manager.
I did also manage to achieve back/forward functionality running Firefox in SAFE mode, but this meant no No-Script, among other things, and I've grown too fond of that particular little script to give it up.
I've rebooted, restored, and reinstalled, can't get this formerly completely reliable program to work like it always has. Before looking around on here, I was beginning to think it was my PC.
THANK YOU FOR YOUR HELP, cor-el. I'm going to see if I can get on live chat on Monday.
bossman344

I recently upgraded to iWork v9.0.3, but when I access each applications the versions are different (i.e. Pages V.4.1, Numbers V2.6, Keynote V5.1.1) with a install date of 3/18/09 -- which is not the current install date of 2 weeks ago. Why?

I recently upgraded to iWork v9.0.3, but when I access each applications the versions are different (i.e. Pages V.4.1, Numbers V2.6, Keynote V5.1.1) with a install date of 3/18/09 -- which is not the current install date of 2 weeks ago. Shouldn't Pages, Numbers, and Keynote show version 9.?? My MAC confirned installation of v9.0.3 and even accepted the software code. With this discrepancy, how can I determine if the latest was installed and operational? I even downloading v9.0.4, 9.0.5, and 9.1. When I tried installing these downloads it popped up note stating that a later version of Keynote was already installed.

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

SCCM 2012: F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image": F8 works in winPE

Similar Messages

Maybe you are looking for