SCCM 2012 - how can i make it alert in SCOM if a deployment fails
Can anyone suggest a post or tell me how to get alerts in SCOM when a deployment from SCCM 2012 fails?
The situation is we deploy Microsoft patches on a monthly basis to all workstations in the company, I want an alert in SCOM if the deployment fails to a particular workstation to ensure that we are aware of them and can fix them.
Hi,
You could configure that in Deployment properties Alert tab as the following screenshot.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
SCCM 2012 - How can I deploy Windows 7 to ANY computers when booted via NIC?
Here are the things that I would like to happen.
1. I should be able to have ANY laptops or desktops boot via network, then see the Windows 7 task sequence select and install the OS, drivers, programs. The computer name should all be "TEST" and not joined to the domain.
P.S
The reason why is because I don't want to have to know the MAC address of the computer every single time I deploy a task sequence.
Thanks for any input.Hi,
Create your task sequence and deploy it to the special 'Unknown Computer' objects.
I personally use a collection named 'Imaging Systems' and added the 'x64 Unknown Computer' and 'x86 Unknown Computer' objects there. All my task sequences are set as available and deployed to that collection, so I can choose whatever task sequence I need
when I PXE boot a new machine.
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing) -
I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?
I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck! -
SCCM 2012 - How to add domain id to local administrator group of all clients
SCCM 2012 - How to add domain id to local administrator group of all clients
Hi,
i have a domain id sccmadmin which is a part of domain admins group too.
Need to add this ID to the local administrators group of all clients. How do I do this? Please help!Hi ,
you need to choose the second option .
First option will remove all the domains users from the local administrator group available in all the PC'S .Then local administrator group will only have the users updated on the members list present in group policy.
Note : Local admins accounts on the local administrators groups will not be removed.
Second option will add the newly created group to the local administrator group in all the PC'S and it will not remove the existing members in the local administrators group.
Step 1 : Just try to create one new group for SCCM management .
Step 2 : Then add the SCCM account to that group.
Step 3 : Then please create a new group policy on that just choose the second option.On that option just add the newly created group to be an member of administrator group in all the PC'S
Why i have asked you to create a new group ?
Because in second option , we don't have a option to add a individual user .
Once you have created a group policy it will like below snap.
As an additional i will tell how to find the newly created group policy is applying to computer objects or not ans also i will tell you how to force update the group policy
1.gpresult /r ----> To find the which group policy is applying on user and computer object .
2.rsop.msc ----> There you can able to find the change has been applied or not .
3.gpupdate /force -----> Forcefully updating the group policy in a client machine
4.In gpmc.msc there is one option called group policy results .That option will be used for centralized management to find the policies that are applied to a user and computer account.
5.Just check the event viewer in all the PC'S for group policy related events.
Most importantly you need to make sure all the computer accounts are placed in an ou ,where the newly created group policy is applying and also make sure that OU doesn't contain any inheritance block.
Please feel free to reply me if you have any queries.
Thanks & Regards S.Nithyanandham -
How can I make a calender entry that makes a sound when it is its turn?
How can I make a calender entry that makes a sound when it is its turn?
Have you even looked at the calendar app? Did you not notice the "Alert" field in the event details when you create a calendar event?
-
How can I make a backup of my iWeb page, How can I make a backup of my iWeb page
How can I make a backup of my iWeb page? Is iWeb also disappearing on June 30?
Here are some Apple help sheets about backing up your files:
http://support.apple.com/kb/HT1813
http://support.apple.com/kb/HT1105
And I found this one written by an independant guy very thorough and helpful:
http://iwebfaq.org/site/iWeb_Backup_retrieve.html
iWeb is not going away, but I would be skeptical about how much longer Apple keeps it around.
If you are looking for a new place to host your website, I use and would recommend Little Oak (www.littleoak.net). They are a Mac hosting company, and are even offering a discount right now for iWeb users (http://www.thewhir.com/web-hosting-news/web-hosting-sales-and-promos-roundup-jun e-29-2012) -
How can we get a alert message in the current browser we are using the mom
how can we get a alert message in the current browser we are using the moment we have entered some data in
the table...
I need a popup alert the moment a new record is added in a table... in apex database is 11g xe..
The idea is I am using a apex application. .The moment new data is added in the table ..I am alerted by a message window..that a new record has been added...
Thanks
Edited by: pauljohny on Jun 11, 2012 10:23 AMpauljohny wrote:
how can we get a alert message in the current browser we are using the moment we have entered some data in the table...
"Current browser"? When viewing anything, or just when using an APEX app?
Ans .. Just when using apex app....even if the apex app is minimised ..The current browser will be the one where I am using apex app...
What i am looking for some scheduler .. to check ..in the table every 5 minute for change if there is a change..then a popup alert be shown...
Split it into [at least] 2 components, database and browser. I'd expect someone calling themself a "DBA Architect" to have some ideas about the database side of things, even if not clued up on JavaScript and AJAX?
I dont think its a database isssue... When i say to check every 5 minutes ..it could be easily done via dbms_scheduler ...I am having issue in getting the popup alert message...
in apex... Dont know wether there is a plugin like modal window(available from skill builder) which shall help in this scenario,.Or might be have to use java scripting and ajax ..
and if it is that (Java scripting and Ajax) .....then shall have to be familiar with java scripting and Ajax...and this shall be a bit time consuming..
Had a feeling this could be accomplished via java scripting and ajax.. ...but still looking for some easy way.. -
How can I make a shortcut for bluetooth in my iPhone 4 ?
Hello everyone
How can I make a shortcut for bluetooth in my iPhone 4 ?sorry not that I know of, out of the box that is, would be heady to quickly change between headset and normal mode though
let apple know you want this feature
http://www.apple.com/feedback/iphone.html
there are 3th party solutions though
http://www.macrumors.com/2012/04/17/new-app-turns-bluetooth-on-and-off-with-one- touch/ -
How can I make the data persistent when using plist ?
I have a UITableView table1. And when I touch any cell in the table a new UIViewController appears and it have two UITextField's name and description. After entering the data in both the text fields I used the save button to save them. In save method I wrote the code for the data to be stored in plist.
-(void)save:(id)sender
indexOfDataArray = temp;
NSString *string1 = [[NSString alloc]init];
NSString *string2 = [[NSString alloc]init];
string1 = nameField.text;
string2 = descriptionField.text;
NSDictionary *myDict = [[NSDictionary alloc] initWithObjectsAndKeys:string2, string1, nil];
[myArray addObject:myDict];
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *documentsDirectory = [paths objectAtIndex:0];
NSString *path = [documentsDirectory stringByAppendingPathComponent:@"VideoData.plist"];
[myArray writeToFile:path atomically:YES];
UIAlertView *alertMesage = [[UIAlertView alloc] initWithTitle: @"Save Alert" message:@"The data entered is saved" delegate:nil cancelButtonTitle:@"cancel" otherButtonTitles:nil] ;
[alertMesage show];
[alertMesage release];
[myArray retain];
But the problem is every time I restart my application the data in the plist is deleted. How can I retain the data in the plist name I specified ?I think yes, I am specifying only one file name to store in the path. I understood my where I am wrong.
If I added data in plist for two items(item1 and item2). And again I need to add next two items(item3 and item4) . How can I make item3 and item 4 do not replace item1 and item2 ?
Thank You. -
How can i make the text go vertically in numbers
How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.
I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
repeat
try
if (the clipboard as text) is not "" then exit repeat
on error
end try
end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true
end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
local k
tell application a to activate
tell application "System Events" to tell application process a
set frontmost to true
try
t * 1
if d is "" then
key code t
else if d is "c" then
key code t using {command down}
else if d is "a" then
key code t using {option down}
else if d is "k" then
key code t using {control down}
else if d is "s" then
key code t using {shift down}
else if d is in {"ac", "ca"} then
key code t using {command down, option down}
else if d is in {"as", "sa"} then
key code t using {shift down, option down}
else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
else if d is in {"kc", "ck"} then
key code t using {command down, control down}
else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
end if
on error
repeat with k in t
if d is "" then
keystroke (k as text)
else if d is "c" then
keystroke (k as text) using {command down}
else if d is "a" then
keystroke k using {option down}
else if d is "k" then
keystroke (k as text) using {control down}
else if d is "s" then
keystroke k using {shift down}
else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
end if
end repeat
end try
end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
local le_texte, la_largeur, la_hauteur, myNewDoc
my activateGUIscripting()
Extract properties of the source/target cell *)
set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
set selection range to range (name of column colNum1 & name of row rowNum1)
end tell
Cut*)
my raccourci("Numbers", "x", "c")
Trigger Preview *)
tell application "System Events"
if "Preview" is not in (name of every application process) then launch application "Preview"
end tell
delay 0.2 -- required
New document from the clipboard *)
my raccourci("Preview", "n", "c")
Rotate to left *)
my raccourci("Preview", "l", "c")
Copy *)
my raccourci("Preview", "c", "c")
Quit *)
my raccourci("Preview", "q", "c")
(system attribute "sys2") < 7
if result then
Click the [Don't Save] button in the warning sheet *)
tell application "Preview" to activate
tell application "System Events" to tell application process "Preview" to tell window 1
name of buttons
repeat 50 times
delay 0.1
if exists sheet 1 then exit repeat
end repeat
tell sheet 1 to click button 2
end tell
end if
Back to Numbers *)
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
end tell
Paste in the cell *)
my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
tell application "Numbers" to tell document 1
set d_name to its name
set s_name to ""
repeat with i from 1 to the count of sheets
tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
if maybe is not 0 then
set s_name to name of sheet i
exit repeat
end if -- maybe is not 0
end repeat
if s_name is "" then
if my parleAnglais() then
error "No sheet has a selected table embedding at least one selected cell !"
else
error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
end if -
How can I make MUSE upload one png that it overlooks? Cache cleared & shows in Preview
MUSE uploads everything to BC except an inport png. I cleared the cache, it shows inPreview, no conflicts noted in Assets and the Browser reflects any other changes I make to the page. The space for the image is missing online and the entire page moves up to fill the space
Thanks for getting back. I had a deadline so I gave-up trying to make that (great) extracted image work and deleted it from my system -frustration. For what its worth, MUSE displayed the png in Design/ Preview/ Plan & provided an empty space for it when published. Besides this quirk, MUSE has been a great.
Date: Mon, 27 Aug 2012 10:49:07 -0600
From: [email protected]
To: [email protected]
Subject: How can I make MUSE upload one png that it overlooks? Cache cleared & shows in Preview
Re: How can I make MUSE upload one png that it overlooks? Cache cleared & shows in Preview
created by adobelance in Help with using Adobe Muse - View the full discussion
Could you share your URL so we can take a look at your site?
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4651358#4651358
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4651358#4651358. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
How can I make google my real default search engine?
Yes, I have set Google as my preferred search engine in Safari Preferences.
But when I try to do things such as define a word, it uses Bing.
Frankly, I do not care for Bing.
How can I make google always be my search engine?
ThanksHere you go Andy.
I did learn some things while looking at it.
I need to clean out byTimemachine drive :-)
EtreCheck version: 1.9.11 (43) - report generated May 24, 2014 at 3:36:36 PM CDT
Hardware Information:
MacBook Pro (17-inch, Early 2011)
MacBook Pro - model: MacBookPro8,3
1 2.2 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6750M - VRAM: 1024 MB
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 4:36:5
Disk Information:
APPLE HDD HTS541075A9E662 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 651.3 GB (128.86 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 98 GB (53.79 GB free)
MATSHITADVD-R UJ-8A8
ST1000LM024 HN-M101MBB disk1 : (1 TB)
EFI (disk1s1) <not mounted>: 209.7 MB
Time Machine (disk1s2) /Volumes/Time Machine: 999.86 GB (258.83 GB free)
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Seagate FreeAgent GoFlex 1.5 TB
Photo Drive (disk3s1) /Volumes/Photo Drive: 1.5 TB (1.03 TB free)
PNY Technologies USB 2.0 FD 32.18 GB
USB20FD (disk2s1) /Volumes/USB20FD: 32.18 GB (18.46 GB free)
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
LaCie Rugged mini
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[kext loaded] com.AmbrosiaSW.AudioSupport (4.1.2 - SDK 10.6) Support
[kext loaded] com.Cycling74.driver.Soundflower (1.5.3 - SDK 10.6) Support
[not loaded] com.Ralink.driver.RT2870USBWirelessDriver (4.2.6 - SDK 10.6) Support
[not loaded] com.elgato.driver.DontMatchAfaTech (1.1) Support
[not loaded] com.elgato.driver.DontMatchCinergy450 (1.1) Support
[not loaded] com.elgato.driver.DontMatchCinergyXS (1.1) Support
[not loaded] com.elgato.driver.DontMatchEmpia (1.1) Support
[not loaded] com.elgato.driver.DontMatchVoyager (1.1) Support
[not loaded] com.mtk.driver.mXHCD (1.0.0) Support
[not loaded] com.quark.driver.Tether (1.1.0d1) Support
[kext loaded] com.quark.driver.Tether64 (1.1.0d1) Support
[not loaded] com.realtek.driver.RTL8192SU (1066) Support
[not loaded] com.realtek.driver.RTL8812AU (1021 - SDK 10.8) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.52) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (2.0) Support
[kext loaded] com.seagate.driver.PowSecDriverCore (5.2.2 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.2 - SDK 10.4) Support
[kext loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.2 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.2 - SDK 10.4) Support
[not loaded] com.silabs.driver.CP210xVCPDriver (3.0.0d1) Support
[not loaded] com.silabs.driver.CP210xVCPDriver64 (3.0.0d1) Support
[kext loaded] com.symantec.kext.SymAPComm (12.6f28 - SDK 10.6) Support
[not loaded] com.symantec.kext.filesecurity (2.6f32) Support
[kext loaded] com.symantec.kext.fw (5.3f12) Support
[kext loaded] com.symantec.kext.internetSecurity (5.3f6) Support
[kext loaded] com.symantec.kext.ips (3.9.1f10) Support
[kext loaded] com.symantec.kext.pf (5.6f22) Support
[not loaded] com.wdc.driver.1394HP (1.0.5) Support
[not loaded] com.wdc.driver.USBHP (1.0.1) Support
Startup Items:
WiFiUtilityStartUp: Path: /System/Library/StartupItems/WiFiUtilityStartUp
ProTec6: Path: /Library/StartupItems/ProTec6
ProTec6b: Path: /Library/StartupItems/ProTec6b
Problem System Launch Agents:
[loaded] com.paragon.NTFS.notify.plist Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist Support
[running] com.backblaze.bzserv.plist Support
[loaded] com.bombich.ccc.plist Support
[running] com.fitbit.galileod.plist Support
[loaded] com.genieoinnovation.macextension.client.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.micromat.TechToolProDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.symantec.deepsight-extractor.plist Support
[loaded] com.symantec.errorreporter-periodic.plist Support
[loaded] com.symantec.liveupdate.daemon.ondemand.plist Support
[loaded] com.symantec.liveupdate.daemon.plist Support
[not loaded] com.symantec.nav.migrateqtf.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[running] com.epson.epw.agent.plist Support
[running] com.genieoinnovation.macextension.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.micromat.TechToolProAgent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[loaded] com.symantec.errorreporter-periodicagent.plist Support
[loaded] com.symantec.nis.application.plist Support
[running] com.symantec.uiagent.application.plist Support
[not loaded] com.trendnet.wutility Support
[running] Wlan.Software.plist Support
[failed] WlanAC.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.adobe.ARM.[...].plist Support
[running] com.akamai.single-user-client.plist Support
[running] com.backblaze.bzbmenu.plist Support
[loaded] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.update.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
[not loaded] ws.agile.1PasswordAgent.plist Support
User Login Items:
Garmin Express Service
WeatherBug Alert
GoFlex Home Agent
iTunesHelper
Dropbox
Fitbit Connect Menubar Helper
Internet Plug-ins:
JavaAppletPlugin: Version: Java 7 Update 55 Check version
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.2.9 Support
SlingPlayer: Version: (null) - SDK 10.6 Support
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
CouponPrinter-FireFox_v2: Version: Version 1.1.7 - SDK 10.5 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
EPPEX Plugin: Version: 3.0.5.0 Support
DirectorShockwave: Version: 12.0.4r144 - SDK 10.6 Support
Safari Extensions:
Translate: Version: 1.1
Video Converter: Version: 3.0.0
1Password: Version: 4.1.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
InstantOn: Version: 7.1.2 - SDK 10.8 Support
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes:
Akamai NetSession Preferences Support
Backblaze Backup Support
EarthDesk Support
Flash Player Support
Flip4Mac WMV Support
Java Support
MagicMenu Support
MagicPrefs Support
Norton\nQuickMenu Support
Paragon NTFS for Mac ® OS X Support
Perian Support
TechTool Protection Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 606.57 GB Disk used: 486.56 GB
Destinations:
Time Machine [Local] (Last used)
Total size: 931.19 GB
Total number of backups: 43
Oldest backup: 2014-04-26 21:03:29 +0000
Last backup: 2014-05-24 20:28:32 +0000
Size of backup disk: Too small
Backup size 931.19 GB < (Disk used 486.56 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
47% bzfilelist
2% WindowServer
0% Dropbox
0% Creative Cloud
0% fontd
Top Processes by Memory:
279 MB SymDaemon
246 MB AdobeAcrobat
229 MB mds_stores
180 MB com.apple.IconServicesAgent
147 MB Microsoft Database Daemon
Virtual Memory Information:
10.50 GB Free RAM
2.81 GB Active RAM
850 MB Inactive RAM
1.84 GB Wired RAM
1.65 GB Page-ins
0 B Page-outs -
My Macbook Pro has become slow and sometimes it hangs. How can I make it work fast and normal.
My Macbook Pro has become very slow and it sometimes hangs. How can I make it work faster and normal? I used Etrecheck and got the report below;
EtreCheck version: 1.9.12 (48)
Report generated June 16, 2014 at 18:05:25 GMT+1
Hardware Information:
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 1:50:52
Disk Information:
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Machintosh HD (disk0s2) / [Startup]: 499.25 GB (465.33 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Login Items:
iTunesHelper
Dr.Web Light
Dropbox
Internet Plug-ins:
SharePointBrowserPlugin: Version: 14.0.0 Support
FlashPlayer-10.6: Version: 14.0.0.125 - SDK 10.6 Support
Flash Player: Version: 14.0.0.125 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Safari Extensions:
iGetter Extension: Version: 2.9.2
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
iGetter Plugin: Version: 2.9.2 Support
iGetterScriptablePlugin: Version: 2.9.2 Support
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
4% Dropbox
3% WindowServer
0% fontd
0% Microsoft Word
0% Microsoft Excel
Top Processes by Memory:
242 MB drwebd
176 MB Dropbox
147 MB Dr.Web Light
86 MB WindowServer
82 MB App Store
Virtual Memory Information:
43 MB Free RAM
1.68 GB Active RAM
1.65 GB Inactive RAM
641 MB Wired RAM
421 MB Page-ins
0 B Page-outsMeli070,
uninstall Dr.Web Light. -
How can I make the "Enable to sink files" warning to go away?
How can I make the "Enable to sink files" warning to go away?
Hi Airmiranda
The following doc should help: http://helpx.adobe.com/creative-cloud/kb/creative-cloud-files-wont-connect.html
"If you are using Creative Cloud Connection preview, you will either see “Unable to sync file(s)” or “Unable to connect...” errors. To disable these error alerts, you can Turn Sync Off or Quit Creative Cloud Connection."
Thanks
Bev -
How can I make sure that in RAM our sql server is not facing any mermory crunch issue?
The SQL server process always show RAM is highly used while its a default behaviour of sql server.
How can I make sure that in RAM our sql server is not facing any mermory crunch issue?
ThanksThe SQL server process always show RAM is highly used while its a default behaviour of sql server.
How can I make sure that in RAM our sql server is not facing any mermory crunch issue?
Thanks
The best way to make sure you are not facing memory pressure is to use perfmon counters and monitor various memory counters
For SQL Server 2005 - 2008 r2 use below counters
SQLServer:Buffer Manager--Buffer Cache hit ratio(BCHR): IIf your BCHR is high 90 to 100 Then it points to fact that You don't have memory pressure. Keep in mind that suppose somebody runs a query which request large amount of pages in that
case momentarily BCHR might come down to 60 or 70 may be less but that does not means it is a memory pressure it means your query requires large memory and will take it. After that query completes you will see BCHR risiing again
SQLServer:Buffer Manager--Page Life Expectancy(PLE): PLE shows for how long page remain in buffer pool. The longer it stays the better it is. Its common misconception to take 300 as a baseline for PLE. But it is not,I read it from
Jonathan Kehayias book( troubleshooting SQL Server) that this value was baseline when SQL Server was of 2000 version and max RAM one could see was from 4-6 G. Now with 200G or RAM coming into picture this value is not correct. He also gave the formula( tentative)
how to calculate it. Take the base counter value of 300 presented by most resources, and then determine a multiple of this value based on the configured buffer cache size, which is the 'max server memory' sp_ configure option in SQL Server, divided by 4 GB.
So, for a server with 32 GB allocated to the buffer pool, the PLE value should be at least (32/4)*300 = 2400. So far this has done good to me so I would recommend you to use it.
SQLServer:Buffer Manager--CheckpointPages/sec: Checkpoint pages /sec counter is important to know about memory pressure because if buffer cache is low then lots of new pages needs to be brought into and flushed out from buffer pool,
due to load checkpoint's work will increase and will start flushing out dirty pages very frequently. If this counter is high then your SQL Server buffer pool is not able to cope up with requests coming and we need to increase it by increasing buffer pool memory
or by increasing physical RAM and then making adequate changes in Buffer pool size. Technically this value should be low if you are looking at line graph in perfmon this value should always touch base for stable system.
SQLServer:Buffer Manager--Freepages: This value should not be less you always want to see high value for it.
SQLServer:Memory Manager--Memory Grants Pending: If you see
memory grants pending in buffer pool your server is facing SQL Server memory crunch and increasing memory would be a good idea. For memory grants please read this article:
SQLServer:memory Manager--Target Server Memory: This is amount of memory SQL Server is trying to acquire.
SQLServer:memory Manager--Total Server memory This is current memory SQL Server has acquired.
8. Free List Stalls/sec – Number of requests per second that had to wait for a free page
9. Free Pages – Total number of pages on all free lists (free lists track all of the pages in the buffer pool that are not currently allocate to a data page, and are therefore available for usage immediately)
NOTE: If you have NUMA system don't use PLE to monitor memory condition it wont give correct value
From 2012 Onwards
Memory management has become easy from 2012 onwards as
Max server memory also allocated memory for requests which require memory >8KB
SQLServer:Memory Manager:Free Memory (KB)
SQLServer:Memory Manager:Target Server Memory (KB)
SQLServer:Memory Manager:Total Server Memory (KB)
For NUMA system its also wort monitoring each node.
Object - SQLServer:Memory Node:Total Node Memory
(KB)
Object - SQLServer:Memory Node:Target Node Memory
(KB)
Object - SQLServer:Memory Node:Free Node Memory
(KB)
Ideally if target server memory is less than or equal to total server memory there wont be memory pressure if target is > total it does not always means its memory pressure
BCHR would also give you good idea about memory pressure
If memory grants pending is frequently non zero there is memory pressure
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP
Maybe you are looking for
-
phone says Photo Stream. photos for the icloud account "icloud" cannot be accessed. Review your account information in Settings. When I got to settings a pop up says Apple ID password and under that is my email. BUT it is the INCORRECT email. When
-
ITunes 10.5.3 for Mac crashing repeatedly
Just upgraded to iTunes 10.5.3 for iMac. Program crashes when I try to update apps. What's going on??? Mike
-
Reading text from a text file(what else!!!!!)
okay to save time here i've managed to read the text from the text file and display in the console my question is - is there a way to read the text a character at a time, at present i read it as a string, the reason i need a character is that i have
-
Why can some fillable forms be saved while others can't?
Do I need to have a more advanced program to always be able to save data on fillable forms?
-
BADI FIEB_CHANGE_BS_DATA codeing
Hi experts, I have an issue in which i have to append the leading zeros which the system populate in the assignement field of te document when the batch runs through SM35 after posting in ff68 some check number is written in the filed e.g 55555 syste