SCCM 2012 Install :An error has occurred while attempting to download or verify required pre....

This is not the first time I am installing SCCM 2012 :) , however stuck at this one for some time now.
I have a lab where SCCM 2012 pre-reqs were downloaded during setup and SCCM 2012 has been installed fine.
We are doing another install for this client however SCCM download fails as ISA blocks it. Therefore we are trying to use the old setup files which were previously downloaded. However, this does not work (Files under e:\SCCM...). The log still refers to
downloading the file from the internet.
Here's the log
=========
<07-25-2012 00:57:28> *********************************************
<07-25-2012 00:57:28> ***** ConfigMgr 2012 Setup Bootstrapper *****
<07-25-2012 00:57:28> *********************************************
<07-25-2012 00:57:28> Commandline:
<07-25-2012 00:57:28> "D:\SMSSETUP\BIN\X64\SetupWpf.exe"
<07-25-2012 00:57:28> INFO: Checking dotnet framework versions...
<07-25-2012 00:57:28> INFO: Dotnet 3.5 installed
<07-25-2012 00:57:28> Starting SetupWpf.exe...
<07-25-2012 00:57:39> *********************************************
<07-25-2012 00:57:39> ***** ConfigMgr 2012 Setup Bootstrapper *****
<07-25-2012 00:57:39> *********************************************
<07-25-2012 00:57:39> Commandline:
<07-25-2012 00:57:39> "D:\SMSSETUP\BIN\X64\SetupWpf.exe"
<07-25-2012 00:57:39> INFO: Checking dotnet framework versions...
<07-25-2012 00:57:39> INFO: Dotnet 3.5 installed
<07-25-2012 00:57:39> Starting SetupWpf.exe...
<07-25-2012 00:57:47> Failed to create process of SetupWpf.exe.
INFO: Attempting to load resource DLL... $$<Configuration Manager Setup><07-25-2012 00:58:34.979+420><thread=2320 (0x910)>
INFO: setupdl.exe: Start $$<Configuration Manager Setup><07-25-2012 00:58:34.981+420><thread=2320 (0x910)>
INFO: Downloading files to e:\SCCMPreReqs $$<Configuration Manager Setup><07-25-2012 00:58:35.000+420><thread=1752 (0x6D8)>
INFO: Extracted file C:\Users\ADMINI~1.Com\AppData\Local\Temp\2\ConfigMgr.Manifest.xml $$<Configuration Manager Setup><07-25-2012 00:58:51.749+420><thread=1752 (0x6D8)>
INFO: Processing file group "MSRDC" $$<Configuration Manager Setup><07-25-2012 00:58:51.755+420><thread=1752 (0x6D8)>
INFO: Processing file "msrdcoob.exe" $$<Configuration Manager Setup><07-25-2012 00:58:51.756+420><thread=1752 (0x6D8)>
INFO: File will be downloaded from
http://go.microsoft.com/fwlink/?LinkId=95740. $$<Configuration Manager Setup><07-25-2012 00:58:51.756+420><thread=1752 (0x6D8)>
INFO: File for msrdcoob.exe [Microsoft Remote Differential Compression Library] will be copied with file name: msrdcoob_x86.exe. $$<Configuration Manager Setup><07-25-2012 00:58:51.756+420><thread=1752 (0x6D8)>
INFO: Processing file "msrdcoob.exe" $$<Configuration Manager Setup><07-25-2012 00:58:51.756+420><thread=1752 (0x6D8)>
INFO: File will be downloaded from
http://go.microsoft.com/fwlink/?LinkId=95741. $$<Configuration Manager Setup><07-25-2012 00:58:51.756+420><thread=1752 (0x6D8)>
INFO: File for msrdcoob.exe [Microsoft Remote Differential Compression Library] will be copied with file name: msrdcoob_amd64.exe. $$<Configuration Manager Setup><07-25-2012 00:58:51.756+420><thread=1752 (0x6D8)>
INFO: Processing file group "WUA" $$<Configuration Manager Setup><07-25-2012 00:58:51.757+420><thread=1752 (0x6D8)>
INFO: Processing file "WindowsUpdateAgent30-x86.exe" $$<Configuration Manager Setup><07-25-2012 00:58:51.757+420><thread=1752 (0x6D8)>
INFO: File will be downloaded from
http://go.microsoft.com/fwlink/?LinkID=158451. $$<Configuration Manager Setup><07-25-2012 00:58:51.757+420><thread=1752 (0x6D8)>
INFO: File for WindowsUpdateAgent30-x86.exe [Windows Update Agent 3.0] will be copied with file name: WindowsUpdateAgent30-x86.exe. $$<Configuration Manager Setup><07-25-2012 00:58:51.757+420><thread=1752 (0x6D8)>
INFO: Processing file "WindowsUpdateAgent30-x64.exe" $$<Configuration Manager Setup><07-25-2012 00:58:51.757+420><thread=1752 (0x6D8)>
INFO: File will be downloaded from
http://go.microsoft.com/fwlink/?LinkID=158453. $$<Configuration Manager Setup><07-25-2012 00:58:51.757+420><thread=1752 (0x6D8)>
INFO: File for WindowsUpdateAgent30-x64.exe [Windows Update Agent 3.0] will be copied with file name: WindowsUpdateAgent30-x64.exe. $$<Configuration Manager Setup><07-25-2012 00:58:51.758+420><thread=1752 (0x6D8)>
INFO: Processing file group "Silverlight" $$<Configuration Manager Setup><07-25-2012 00:58:51.758+420><thread=1752 (0x6D8)>
INFO: Processing file "Silverlight.exe" $$<Configuration Manager Setup><07-25-2012 00:58:51.758+420><thread=1752 (0x6D8)>
INFO: File will be downloaded from
http://go.microsoft.com/fwlink/?LinkId=196277. $$<Configuration Manager Setup><07-25-2012 00:58:51.758+420><thread=1752 (0x6D8)>
INFO: File for Silverlight.exe [Silverlight Runtime] will be copied with file name: Silverlight.exe. $$<Configuration Manager Setup><07-25-2012 00:58:51.759+420><thread=1752 (0x6D8)>
INFO: Processing file group "WIC" $$<Configuration Manager Setup><07-25-2012 00:58:51.759+420><thread=1752 (0x6D8)>
INFO: Processing file "wic_x86_enu.exe" $$<Configuration Manager Setup><07-25-2012 00:58:51.759+420><thread=1752 (0x6D8)>
INFO: File will be downloaded from
http://go.microsoft.com/fwlink/?LinkId=234177. $$<Configuration Manager Setup><07-25-2012 00:58:51.759+420><thread=1752 (0x6D8)>
INFO: File for wic_x86_enu.exe [Windows Imaging Component 32 Bit] will be copied with file name: wic_x86_enu.exe. $$<Configuration Manager Setup><07-25-2012 00:58:51.759+420><thread=1752 (0x6D8)>
INFO: Processing file "wic_x64_enu.exe" $$<Configuration Manager Setup><07-25-2012 00:58:51.759+420><thread=1752 (0x6D8)>
INFO: File will be downloaded from
http://go.microsoft.com/fwlink/?LinkID=234176. $$<Configuration Manager Setup><07-25-2012 00:58:51.760+420><thread=1752 (0x6D8)>
INFO: File for wic_x64_enu.exe [Windows Imaging Component 64 Bit] will be copied with file name: wic_x64_enu.exe. $$<Configuration Manager Setup><07-25-2012 00:58:51.760+420><thread=1752 (0x6D8)>
INFO: Processing file group "Dot_Net_Framework" $$<Configuration Manager Setup><07-25-2012 00:58:51.760+420><thread=1752 (0x6D8)>
INFO: Processing file "dotNetFx40_Client_x86_x64.exe" $$<Configuration Manager Setup><07-25-2012 00:58:51.760+420><thread=1752 (0x6D8)>
INFO: File will be downloaded from
http://go.microsoft.com/fwlink/?LinkId=199236. $$<Configuration Manager Setup><07-25-2012 00:58:51.760+420><thread=1752 (0x6D8)>
INFO: File for dotNetFx40_Client_x86_x64.exe [.NET Framework Client Profile 4.0 RTM] will be copied with file name: dotNetFx40_Client_x86_x64.exe. $$<Configuration Manager Setup><07-25-2012 00:58:51.760+420><thread=1752 (0x6D8)>
INFO: Processing file "dotNetFx40_Full_x86_x64.exe" $$<Configuration Manager Setup><07-25-2012 00:58:51.760+420><thread=1752 (0x6D8)>
INFO: File will be downloaded from
http://go.microsoft.com/fwlink/?LinkID=224688. $$<Configuration Manager Setup><07-25-2012 00:58:51.761+420><thread=1752 (0x6D8)>
INFO: File for dotNetFx40_Full_x86_x64.exe [.NET Framework Extended 4.0 RTM] will be copied with file name: dotNetFx40_Full_x86_x64.exe. $$<Configuration Manager Setup><07-25-2012 00:58:51.761+420><thread=1752 (0x6D8)>
INFO: Processing file group "SQL_Redist" $$<Configuration Manager Setup><07-25-2012 00:58:51.761+420><thread=1752 (0x6D8)>
INFO: Processing file "SQLEXPR_x64_ENU.exe" $$<Configuration Manager Setup><07-25-2012 00:58:51.761+420><thread=1752 (0x6D8)>
INFO: File will be downloaded from
http://go.microsoft.com/fwlink/?LinkId=218933. $$<Configuration Manager Setup><07-25-2012 00:58:51.761+420><thread=1752 (0x6D8)>
INFO: File for SQLEXPR_x64_ENU.exe [SQL Server 2008 R2 SP1 Express] will be copied with file name: SQLEXPR_x64_ENU.exe. $$<Configuration Manager Setup><07-25-2012 00:58:51.762+420><thread=1752 (0x6D8)>
INFO: Processing file "msxml6_x64.msi" $$<Configuration Manager Setup><07-25-2012 00:58:51.762+420><thread=1752 (0x6D8)>
INFO: File will be downloaded from
http://go.microsoft.com/fwlink/?LinkID=169539. $$<Configuration Manager Setup><07-25-2012 00:58:51.762+420><thread=1752 (0x6D8)>
INFO: File for msxml6_x64.msi [MSXML 6.0 Service Pack 1] will be copied with file name: msxml6_x64.msi. $$<Configuration Manager Setup><07-25-2012 00:58:51.762+420><thread=1752 (0x6D8)>
INFO: Processing file "sqlncli.msi" $$<Configuration Manager Setup><07-25-2012 00:58:51.762+420><thread=1752 (0x6D8)>
INFO: File will be downloaded from
http://go.microsoft.com/fwlink/?LinkID=169540. $$<Configuration Manager Setup><07-25-2012 00:58:51.762+420><thread=1752 (0x6D8)>
INFO: File for sqlncli.msi [SQL Server 2008 Native Client] will be copied with file name: sqlncli.msi. $$<Configuration Manager Setup><07-25-2012 00:58:51.763+420><thread=1752 (0x6D8)>
INFO: Processing file "SQLSysClrTypes.msi" $$<Configuration Manager Setup><07-25-2012 00:58:51.763+420><thread=1752 (0x6D8)>
INFO: File will be downloaded from
http://go.microsoft.com/fwlink/?LinkId=169541. $$<Configuration Manager Setup><07-25-2012 00:58:51.763+420><thread=1752 (0x6D8)>
INFO: File for SQLSysClrTypes.msi [SQL Server 2008 System CLR Types] will be copied with file name: SQLSysClrTypes.msi. $$<Configuration Manager Setup><07-25-2012 00:58:51.763+420><thread=1752 (0x6D8)>
INFO: Processing file "SharedManagementObjects.msi" $$<Configuration Manager Setup><07-25-2012 00:58:51.763+420><thread=1752 (0x6D8)>
INFO: File will be downloaded from
http://go.microsoft.com/fwlink/?LinkId=169542. $$<Configuration Manager Setup><07-25-2012 00:58:51.763+420><thread=1752 (0x6D8)>
INFO: File for SharedManagementObjects.msi [SQL Server 2008 Management Objects] will be copied with file name: SharedManagementObjects.msi. $$<Configuration Manager Setup><07-25-2012 00:58:51.764+420><thread=1752 (0x6D8)>
ERROR: Verification failed: File e:\SCCMPreReqs\msrdcoob_x86.exe not found $$<Configuration Manager Setup><07-25-2012 00:58:51.764+420><thread=1752 (0x6D8)>
====================================================
Regards, Vik Singh "If this thread answered your question, please click on "Mark as Answer"

The file I was hosting is available from Microsoft's site here http://go.microsoft.com/fwlink/?LinkID=234176
Manually download this and put it into the target dir when running setupdl.exe from \%SCCM SOURCE LOCATION%\SMSSETUP\BIN\X64\
I have confirmed that this file is available to download any further issues would be isolated to your environment.
Regards
Matt Thorley
En español
para Diana....
El archivo
estaba dando
está disponible
en el sitio
de Microsoft aquí
http://go.microsoft.com/fwlink/?LinkID=234176
Manualmente
descargar esto
y ponerlo
en el
directorio de destino
cuando se ejecuta
setupdl.exe desde
\%SCCM SOURCE LOCATION%\SMSSETUP\BIN\X64\
He confirmado
que este
archivo está
disponible para
descargar cualquier
problema adicional
sería aislada
de su
entorno.
Saludos

Similar Messages

Crystal reports 2008 sp3 : An error has occurred while attempting to load t

Hello,
Please forgive me for posting in the CR .NET forum because we are using the full Crystal Reports 2008 product and I did not see a category for it. If there is a better forum for this question, please let me know or feel free to move it.
We are having trouble deploying our crystal reports 2008 reports to a Windows Server 2008 R2 server in an aspx application...
I have been working on this issue for 4-days and cannot seem to make any progress, so I would really appreciate your help.
Our Environment:
Development Computer (32-bit, WinXP)
VS2008 (fully updated, was not installed with its Crystal Reports feature)
Crystal Reports 2008 SP3 (downloaded and installed "cr2008_sp3_fullbuild")
Database Server (64-bit)
"SERVER2" is a Microsoft SQL Server 2008 server, fully updated
Web Server (64-bit)
"SERVER3" is a Microsoft Server 2008 R2 Web server.
We have an application that is installed on the Web server and it pulls data from the database server.
The webpages are accessing the database properly. There is a ShowReport.aspx webpage that has the
CrystalReportsViewer on it. We send parameters and logon information to ShowReport.aspx. ShowReport
works properly on our development computer and the report looks good, but it fails on the web server.
We downloaded CRRuntime_12_3_mlb.msi (X86) from SAP/CR and installed it on the web server without any issues.
Our application pool on the web server for this application is set to 32-bit mode. When I launch the
application, it works properly with the database and displays data on web pages, but when I try to
view a report on ShowReport, I get the following error message:
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium) that is required.
According to everything that I have read, I have properly matched the DLLs: On the development computer, "cr2008_sp3_fullbuild" was installed; On
the web server, "CRRuntime_12_3_mlb.msi (X86)" was installed. They are both Crystal Reports 2008 and not .NET. CR.NET was not installed on our development computer, so our application was built with full Crystal Reports 2008 SP3. On our development computer, .ENGINE is 12.0.2000.0 and
the same version is on the web server.
So, I am completely at a loss as to why we are encountering this error. Help, Please!!!
Thank you in advance,
Mike

Hi Mike,
Did you set your project for X86 mode only? If not do so and rebuild and deploy your app.
Thank you
Don

An error has occurred while attempting to load the Crystal Reports runtime in deployed applications

My reports use to work but now i'm getting the following error on all reports in all the applications on my server
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.

Hi Willingtolearnja,
This forum is for TFS, I'd like to know whether you use TFS and your question is related to TFS. It would be better to let us know more details about your scenario if it's related to TFS. If not, you might need to open a new thread in the proper tech forum
that your project related for a better response.
However, from the error message, you might use the wrong configuration for x86/x64 mode. Please change the configuartion and try again. Check the links below for more information:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/82e23647-7116-424b-b437-df0cb2be083d/an-error-has-occurred-while-attempting-to-load-the-crystal-reports-runtime?forum=vscrystalreports
http://stackoverflow.com/questions/19286630/an-error-has-occured-while-attempting-to-load-the-crystal-reports-runtime
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

An error has occurred while attempting to load the CR in hosting

I deployed my asp.net with crystal report in hosting server...
They have installed Crystal Report Basic Runtime for Visual Studio 2008.(10.5.3700.0) on windows server 2008 OS X64..
I developed my asp.net application with visual studio 2008 in xp machione x86 now on deploying this im getting the following error on hosting server, in my local server it works fine..
The error:-
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
They have installed 10.5.3700.0 runtime on server still why this error...?

You probably installed the 32 bit runtime (x86) but are running the application in 64 bit mode. I think you are using a web app, so you need to do one of two things, install the x64 version of the runtime or switch the application pool for your website to run in 32 bit mode.

An error has occurred while attempting to load the Crystal Reports runtime.

Server Error in '/' Application. An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly. Please install
Crystal Report is not working on webServer but It is working on local Saver
on Server i m getting this error
Message was edited by: Ludek Uher

If you have your AppPool set for 32 bit then install the 32 bit runtime, if it's set for 64 bit then install the 64 bit runtime.
Try searching, lots of posts on this subject.
Don

I can not sighn in. I get the message A network error has occurred while attempting to sign in.

I can not sighn in. I get the message A network error has occurred while attempting to sign in.

Hi rebjrbaker,
I'm guessing that you're trying to log in to the service from within Reader. If that's the case, you may need to update the version of Reader you're using. Choose Help > Check for Updates. You should be using version 11.0.9 (this update was just released on Tuesday, 9/16).
Best,
Sara

Receiving a message "an error has occurred" while trying to download mac os x lion. HELP!

I purchased the update to Mac OS X Lion (10.7) for my MacBook running 10.6.8. When I attempt to download I receive the message "An error has occurred" (see attached screenshot).

OK, now after a reboot, the purchased items list is empty... how can I start the download again!?

An error has occurred while attempting to load crystal report runtime 64

I am using Crystal Report 2008. Visual Studio 2008 Professional on a SQL Server 2005 X64 SP2
with .NET 3.5 SP1 beta framework
This problem happens in X64 environment only. I tried everything I Can find in the web:
1) run the crredist2008_x64 and X86.msi, same error
2) run this command
cscript %SystemDrive%\inetpub\AdminScripts\adsutil.vbs set w3svc/AppPools/Enable32bitAppOnWin64 1
and it said 'Service Unavailable' when accessing the page.
3) attempting to change target platform to X86 to run on the 64 bit OS. I have the following problems.
A) the configuration manager only have .NET as the platform. I cannot change it to X86
B) There is no project
file (any files ends with .proj) where I can modify manually to change the target platform. (I created website,not project from VS 2008)
Running the debug version (Control F5) from VS 2008 has no problem.
Please help

What assembly version of the dlls are you using (10.5 or 12.0)?
If you are using the 10.5 then you would need to run the 64 bit runtime installer for Crystal Reports Basic for VS.NET 2008.
If you are using the 12.0 then you will need to install the 32 bit runtimes for CR 2008 and change the application to run in x86 only mode.
Here is the note that covers that (it was written for XI R2, but applies to CR 2008 as well)
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303330333933303337%7D.do]
Jason

An error has occurred while trying to load the files required for firefox .....so firefox does not run at all

HTC Android I have latest version

Hi,
I'm sorry you're having this problem with Firefox mobile. You might try going to settings - manage applications on your device and uninstall Firefox and then install it again.
Thanks,
Michelle

Java for OS X 2013-005 can't be installed on this disk. An error has occurred while evaluating javascript

I have a Mac Mini OS X 10.8.5. Try to do the Java update and got this message: Java for OS X 2013-005 can't be installed on this disk. An error has occurred while evaluating javascript for the package. I can't find a fix or a solution. How can I fix this? Any help would be appreciated

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

10.3 OS Upgrade error. An error has occurred while downloading software for your device. Please verify your internet connection or try again later

HELP ! HELP ! HELP ! "An error has occurred while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." appears while attempting to upgrade or install BlackBerry Device Software. upgrading my Z10 OS to 10.3 on both (link & web). but facing same problem again and again. plz help. internet speed is 1mbps and working fine.

I suggest you try the very clean and very forceful AutoLoader method:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

Hi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
     Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
     Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline

A critical program error has occured while opening workbook

Dear friends,
A critical error has occured while opening workbook. The issue is that the same workbook is opening in some one machine but not in others.The following Dialog box is poping out when tried to open workbook:
"A critical program error has occured.The Program will now terminate.Please refer to trace for further information."
However,i did the full updation of service pack3 of MS Excel 2003 on my machine and the same version as on that particular machine(on which workbook is opening). The problem is still there.Please provide some solution.
Thankx a lot in advance!!!
regards,
Sandeep Singla

The machine where the workbook is opening has a GUI :-
Release : "710 Final Release"
File Version : 7100.2.7.1038
Build : 967944
Patch Level : 7
and the machine where the critical program error is coming has a GUI :-
Release : "710 Final Release"
File Version : 7100.2.8.1039
Build : 983952
Patch Level : 8
The Excel 2003 are similar in both the machines as the service pack3 has been installed in the machine where workbook was not opening.
Any help will be appreciated.
Thanks and Regards,
Sandeep Singla

An error has occurred while erasing your restore destination disk

MacBook Pro, mid-2010 15-inch; OS X Mavericks (10.9.4); originally shipped with Snow Leopard.
My MBP has crashed & won't start beyond the grey screen and spinning wheel. System restore from Time Machine backup won't work. I tried all these without success
Safe mode (hold Shift during power-up)
Verbose safe mode (hold Shift + Command + V during power-up) which reports
           ** /dev/rdisk0s2 (NO WRITE)
               ** Root file system
                    Executing fsck_hfs (version hfs-226.1.1).
               disk0s2: I/O error
          ...followed by some other stuff I haven't transcribed before it grinds to a halt
Reset NVRAM (hold Option + Command + P + R during power-up)
I can boot up ok into the Recovery partition (hold Command + R during power-up) to run Disk Utility and Time Machine.
I can’t start from the OS X Install disk (hold C during power-up) cos my DVD drive spits out all CDs and DVDs after spinning them up. This despite cleaning with compressed air. Tried to run AHT, the Apple Hardware Test (hold D during power-up): nada. Also running AHT from the internet - (hold Option + D during power-up), still nothing.
I’ve verified my hard disk (all appears ok) and run Repair Disk Permissions. This reports some problems, for example:
        Permissions differ on “System/Library/CoreServices/Feedback Assistant.app”; should be drwxr-xr-x ; they are lrwxr-xr-x .
          Unable to set owner and group ; error 22: Invalid argument
          Unable to set permissions ; error 22: Invalid argument
Same problem (but with various different permissions) for
          “usr/lib/libruby.2.0.dylib”
          “usr/lib/libruby.dylib”
          “Applications/Safari.app/Contents/Resources/Safari.help/Contents/Resources/inde x.html”
Also have lots where as well as unable to set owner, group and permissions the
          Group differs; should be 80; group is 0.
Affected items are
          “Library/Printers”
          “Library/Printers/Icons”
          “Library/Printers/InstalledPrinters.plist”
and a few dozen more for various items in subfolders of “Applications/iBooks.app/Contents”
I don’t know if they’re linked with my problem or an irrelevant side-issue. I don’t understand the ramifications of these wrong permissions that Disk Utility can’t repair. And I don’t have the headspace or time to learn now either.
I repeatedly tried system restore from Time Machine backup, but get the error:
          An error has occurred while erasing your restore destination disk. Restart your computer and then try restoring again.
I tried erasing the hard disk partition with Disk Utility but got the error
          Volume erase failed with error couldn't unmount disk.
Now totally out of ideas. Have I overlooked anything? Is my hard drive a goner? BTW my battery is also saying "Replace soon", but I don't know if that's relevant. All help gratefully appreciated!

There are several ways to back up a Mac that is not fully functional. You need an external hard drive or other storage device to hold the data.
1. Start up from the Recovery partition, from Internet Recovery, or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
2. If Method 1 fails because of disk errors, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
3. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
4. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

An error has occurred while updating article layouts. The InDesign file for the layout cannot be...

When trying to complete the tutorial for indesign I get the following error when trying to add an article to my folio:
"An error has occurred while updating article layouts. The InDesign file for the layout cannot be found."
I am able to create the folio then I click into articles. My document "WiFi_v.indd" is open when clicking add article, but I keep getting this error message.
I am using the following versions of the software (Should be the latest).
- Folio Builder (Downloaded version Version 1.1.8.0)
reported version:
11.4.3.20111129_m672305 7.5.5.17
Adobe In Design 7.5.2 CS 5.5
Also tried reinstalling the plugins (uninstall + install)

If you're on Mac OS with the OS in another language than english the "User" folder might contain a non english character and causing problems.
I e in Sweden the Mac OS user-folder is called "Användare". When attempting uploading articles from a file locaded anywere this "Användare" is in the file path the Folio producer says Error finding InDesign layout, due to -what i think is-the "ä" in Användare. If you still want to work local you can place the InDesign files directly into the Macintosh HD. In this case the User folder is not used.
BR
Henrik

SCCM 2012 Install :An error has occurred while attempting to download or verify required pre....

Similar Messages

Maybe you are looking for