SCCM 2012, Intune and Windows OS Support

I am just trying to confirm what I believe I am reading about Microsoft OS Support for Windows Intune when integrated with SCCM 2012 R2...
What I believe to be the case:
Windows RT, Windows RT 8.1, Windows 8.1 all have the ability to enroll via OMA-DM, thus can be managed by SCCM.
Down-level OS's such as XP SP3, Vista, and Windows 7 require the Intune Client to be installed, thus can only be managed by a standalone Intune subscription?
Can anyone confirm this?
Thanks!

More or less correct.
Generally, even for Win 8.1 and WinRT, IBCM or DirectAccess are a better choice than OMA-DM as it can only enable management of a limited subset of features. Two important ones cannot be: software updates and endpoint protection.
As you've seen (based on your other thread), you can still use the Intune subscription that is connected to your ConfigMgr site to manage devices with the Intune client installed. Effectively, there are two halves of the Intune subscription, the full client
management half and MDM half which can be controlled by Intune or ConfigMgr. Just because the MDM half is controlled by ConfigMgr does not technically preclude you from still utilizing the full client management half. That's not at all saying you should do
this though, but you certainly could.
Jason | http://blog.configmgrftw.com

Similar Messages

Wifi profiles SCCM 2012 R2 and Windows Intune

Hi All,
A quick question regarding SCCM 2012 R2 and the new Wifi Profiles feature...
Can anyone confirm if you need windows Intune combined with SCCM 2012 R2 to be able to deploy WIFI profiles to users devices i.e Windows 8.1, IOS and Android platforms? Microsoft documentation is not clear on this subject.
Any help would be much appreciated.
Regards PowerShell90

It not as straight forward as one would hope. I am running the latest version of SCCM 2012 R2 CU2 connected to my Windows Intune subscription. There are a lot of hickups. One is that the direct of management needs to be all or nothing. In other words you
either need to use Windows Intune solely to manage your devices or SCCM 2012 R2 (via connector). If the later then you must do everything from in SCCM 2012 R2. You cannot hybrid manage your devices as this will screw things up.
Android for some reason is left out on a lot of features. I would think that MS Devs would work hard on the market share that being Android, not iOS. Any way, accord to some official MS articles Android is supported, but others claim that not all features
are, these being the important ones like Email and Wi-Fi Profiles. They simply do not work.
I think MS is heading in the right direction but there is a lot of work that needs to be done before this is a competitive product. I could care less if connects to my SCCM 2012 R2 server or not. Here are few things that I sent o a MS Support Rep today that
need to be address.
1. Better response time when updating devices after enrollment (e.g. Name change).
2. The ability to locked down uninstalling Windows Intune from device.<o:p></o:p>
3. The ability to locked down certain features in the Windows Intune app on device (e.g. User can reset device with Windows Intune app, rename, etc...).<o:p></o:p>
4. Ability to rename device in either Windows Intune Admin Portal and/or SCCM 2-12 R2.<o:p></o:p>

Windows 8.1 mobile device management using integrated environment of SCCM 2012 R2 and Windows intune

Can we avoid the dependency on the Symantec certificate for enabling windows phone enrollment under Administration->Cloud services -> Windows InTune subscriptions - Windows Phones. My environment will have only windows 8.1 phones.
Regards
Leela

See http://status.manage.microsoft.com/StatusPage/ServiceDashboard.
Engineers are investigating a service issue impacting access to portal via mobile devices.
(Started on 12/30/2014 8:00:00 AM UTC)
1/8/2015 11:42:49 PM (UTC)
Current Status: Engineers are continuing to troubleshoot potential issues related to Active Directory Federation Services (ADFS). Engineers have gathered additional traces and logging data for deeper analysis. User Experience: Affected users with Windows Phone,
iOS, or Android devices are unable to access their company portal and receive repeated prompts to enter credentials. If incorrect credentials are entered, users will receive an error stating that they have entered a bad password. Customer Impact: Engineers
have received reports that some customers are experiencing this issue. A subset of users are affected by this event. Other users remain unaffected. Incident Start Time: Tuesday, December 30, 2014, at 8:00 AM UTC Next Update by: Tuesday, January 13, 2015, at
12:00 AM UTC
Torsten Meringer | http://www.mssccmfaq.de

SCCM 2012 R2 and Windows 8.1

Hi,
I have installed SCCM 2012 R2. SCCM client deployed on 10 PCs and I can explore Hardware resources on all PCs except 1 PC which is 8.1
so my question now does SCCM 2012 R2 supports 8.1?
Thanks,
Kareem Behery

Hi,
Yes, ConfigMgr 2012 R2 supports Windows 8.1. Check the Windows 8.1 computer to make sure that the SCCM client is operational and sends in Inventory to the Site server. Inventpryagent.log file on the computer is a good place to start.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012 R2 and windows 7 folder redirection

Hello gurus
I want to ask a quick question. Does anyone know if I can do folder redirection, offline folders, roaming profiles and network drive on Windows 7 using SCCM 2012 R2?
Thanks in advance.
Regards,

The setting does not apply to Windows 7. I tested and DCMagent just thought it is Non-applicable.
Juke Chou
TechNet Community Support

Microsoft Intune and SCCM 2012 R2 Integration - Windows 7 clients.

Hi All,
This is our scenario I am trying to find out more about Intune integration with SCCM 2012 R2 and what solution is best for us.
We have a SCCM 2012 R2 instance up and running which services/monitors machines on our internal network. All of these machines are Windows 7 OS. We have laptops that travel frequently and need for these to report back to our SCCM server whilst connected
via internet connections. Also we have multiple "off domain" machines (ie workgroup machines) which we also need to report back to the same SCCM server.
I have read a lot about Intune integration with SCCM but it appears to be targetted at MDM not around PC management.
What would be the best way for us to move forward?
Thanks in advance.

Just see my reply in the ConfigMgr forums.
Torsten Meringer | http://www.mssccmfaq.de

SCCM 2007 and 2012 coexistence and Cross Forest support

Hi All
I have a question
My company has recently acquired another company
That company exist of 2 forests (forest A has one domain namely domain A : and forest B has one domain namely domain B) with a two way forest trusts between them
Domain A has a SCCM 2007 primary Site
Domain B has a SCCM 2007 primary site and 2 secondary Sites
The active directory schema is extended in both domains
We cannot migrate the SCCM 2007 environment because it is a mess , so we want to build a new SCCM 2012 R2 environment into Domain B and from that environment manage both domains (OSD, software deployment client management ...)
We want to install a SCCM 2012 R2 (CU3) primary server into domain B and add two distribution points instead of the two secondary sites and manage both forests (domain A and B) from that primary site server
Now my questions are
1 )
Can an SCCM 2007 environment coexist with a SCCM 2012 environment?
I believe it can If I make sure that in the new SCCM 2012 environment we only use boundary groups for content locations and not for site assignment and in the SCCM 2007 environment (domain A and domain B) I need to disable the client push account.
2)
Discovery , How do we make sure that systems and users are discovered from both domains?
Do we need to do some additional configuration to make that happen or will this be no problem because of the Two way trust and active directory schema extension.
3 )
Can we do all the management from the new SCCM 2012 R2 site , also OSD deployments for both domains ?
I hope someone can help me with these questions
Thanks in advance
Regards
Johan

Hi All
After talk with management and local support the decision is made not to deploy only distribution points but instead deploy secondary sites (of course with management point and distribution point) because the bandwidth to these sites is a
problem.
So the situation will be Domain A Primary site (SCCM 2012 R2) and for both remote locations a secondary site , domain B a secondary site (of course all the related ports need to be opened for both domains as explained here https://technet.microsoft.com/en-us/library/hh427328.aspx
Question
Can we do all the management from the new primary SCCM 2012 R2 site (domain A) , also OSD deployments for both domains A and B ?
I hope someone can review this
Thx in advance
Regards Johan

Just FYI, Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide in Word format in the TechNet Gallery

The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
http://bit.ly/1pYZT3F
Thanks -
James McIllece

hello again,
meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
Likely to be overseen at the end of one paragraph it says:
"Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
Question : Is this an official statement and is it still valid with most recent
Windows Server 2012 R2 that NFS client does NOT support NFSv4.x ??
thanks - Rainer

Deploy Java Updates using SCCM 2012 SP1 and SCUP 2011

What is the best way to deploy Java updates using sccm 2012 SP1 and SCUP 2011?

I didn´t find Kent´s blog useful when talking about Java. I can deploy Adobe products fine, but I have to import Java manually because not having Shavlik certificate. So with that said, I have the fallowing problem;
I have full offline installer unpacked, .msi file and Data1.cab. When I´m importing these binaries to SCUP, I only can point to .msi. Doing that, installation fails in client side fails because of lack of data1.cab fine, which is the main file.
Should I use some other downloaded files of Java? I couldn´t find any Java-update-file only type of files to download.

What versions of Linux and WIndows are supported?

I have looked on the web site, and cannot find what versions of Linux and Windows are supported? Most of the documentation just says Linux and/or Windows, with no referenence to version.
My specific questions are for Oracle Personal server:
Is it supported on
Windows XP Professional
Windows XP Home Edition
Red Hat Linux 7.3
Red Hat Linux 7.2
Red Hat Linux 8.0
Red Hat Linux 9.0
RHEL 3.0
If yes to all or some, what is the best OS/Version to install the Oracle Personal Server on? Considering performance? Ease of install and use?
Thanks,
Tomas

Joel:
Thanks. But, when I tried to create an acct in metalink section, it said I needed a "support identifier". When I researched this, it seems I can only get a "support indentifier" if I have a valid support contract.
Now, that seems a bit of "the cart before the horse", as I am thinking of buying the Oracle Personal Server, but have not.
And want to know supported platforms before I do buy. But, now it seems I have to buy, to get my pre-sales question answered.
Is there another place I can find this info, possibly a pre-sales area of the oracle web?
Rgds,
Tomas

Windows 8.1 Update (with WinPE 5.1) ADK + SCCM 2012 R2 and WinXP

Hello,
I see new ADK version (8.1 Update) is released
http://www.microsoft.com/en-US/download/confirmation.aspx?id=39982
It contains WinPE 5.1 and new USMT (which version?), does it support migration from WinXP to Win7?
Previously I used USMT5 (instead of 6.3) and modified WinPE 5.0 with bootsect.exe from WinPE 4.0 (from ADK 8.0) on SCCM 2012 R2 CU3.
And can I use ADK 8.1 Update with SCCM 2012 R2?

He does answer your question about the USMT version.
The rest still applies in terms of XP support. See below.
http://blogs.technet.com/b/mniehaus/archive/2014/01/09/migrating-from-windows-xp-to-windows-8-1-using-mdt-2013.aspx
Yes, ConfigMgr 2012 R2 is supported.
http://blogs.technet.com/b/configmgrteam/archive/2014/04/03/understanding-the-adk-for-windows-8-1-update-and-configmgr-osd.aspx
Daniel Ratliff | http://www.PotentEngineer.com
in the article I found:
Windows PE version 5.1 is not needed for Configuration Manager and can actually be problematic if you try to use it. Windows PE 5.0 can continue to be used to deploy Windows 8.1 Update. There is a documented process to upgrade Windows PE to version 5.1,
but this should be considered incompatible with Configuration Manager at this time.
So for a new installation of SCCM 2012 R2 I can install ADK 8.1 update because in contains WinPE 5.0 and option to update to 5.1. And unclear about XP, it seems XP is not supported again.
Also fourth release was in September 2014, but article was posted in April 2014.

Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIA

Hi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome.

Deploy UDI Windows 10 with SCCM 2012 R2 and MDT 2013 Update 1

Hi,
Trying use "User-Driven Installation" with
SCCM 2012
R2 CU4 and MDT
2013 Update 1 for deploy Windows
10.
Created MDT Task Sequences with
template "Client Task sequence"
and Deployment Method "User-Driven Installation".
When I try to deploy I have error like:
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Part smsts.log
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Expand a string: WinPEandFullOS TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf" TSManager 22.04.2015 11:36:57 1160 (0x0488)
[ smsswd.exe ] InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
PackageID = '' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
BaseVar = '', ContinueOnError='' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
SwdAction = '0001' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Set command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Working dir 'not set' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Executing command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft (R) Windows Script Host Version 5.12 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Copyright (C) Microsoft Corporation. All rights reserved. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft Deployment Toolkit version: 6.3.8216.1000 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the action: Error in the task sequence.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionRetCode=5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 22.04.2015 11:36:57 1160 (0x0488)
Clear local default environment TSManager 22.04.2015 11:36:57 1160 (0x0488)
Let the parent group (Gather Logs and StateStore on Failure) decides whether to continue execution TSManager 22.04.2015 11:36:57 1160 (0x0488)
The execution of the group (Gather Logs and StateStore on Failure) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
The command completed successfully. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
Successfully launched command shell. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)

MDT Updates for Windows 10 Technical Preview Build 10041
Если Вам помог чей-либо ответ, пожалуйста, не забывайте жать на кнопку "Предложить как ответ" или "Пометить как ответ".
http://zalozny.com.ua

SCCM 2012 R2 and client content sharing on Windows 7 Pro

Is it possible to use "Allow clients to share content with other clients on the same subnet" option on Windows 7 Pro clients? It's bit confusing because based on documentation, branch cache is only available on Windows 7 Enterprise and
Ultimate editions. Why does Windows 7 Pro have branch cache service when it's not usable?

Hi,
Is Branch Cache working with Windows 7 Professional?
No, it will not work with Windows 7 professional . Only Windows® 7 Enterprise and Windows® 7 Ultimate will support it.
We can confirm that form the official link below:
Client computer. A computer at a branch office that is running either Windows 7 Enterprise or Windows 7 Ultimate and that has BranchCache enabled.
BranchCache Overview
http://technet.microsoft.com/en-us/library/ee307962(WS.10).aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 Agent and high CPU utilization.

We have numerous Windows workstations and servers running with very high CPU utilization. Services are slow to start and login can take an hour. The service running with high CPU is svchost.exe, we determined that it is Windows Management Instrumentation
that is causing high CPU in svchost.exe.
If we stop or uninstall the SCCM 2012 Agent, everything calms down on the computer.
Any ideas as to way this would be?

Same issue seen on a clients and KB2617858 resolves it. I am deploying using the App model no problem with x86 and x64 hotfixes with requisite OS requirements. Is there a way to configure to only apply to those that it applies to...if that makes sense. I
ask because my B&C x64 W7Sp1 image does not require it (I have not included it) whereas other non-B&C do - what's the condition or applicability (or non-applicability) if not as listed on the KB..! If I run it one W7 machine it says it doesn't apply
and isn't already, whereas another it installs..!
http://support.microsoft.com/kb/2705357:
To apply this hotfix, you must be running one of the following operating systems:
Windows 7
Windows 7 Service Pack 1 (SP1)
Windows Server 2008 R2
Windows Server 2008 R2 Service Pack 1 (SP1)
..obviously, if a client has the issue it applies :)
Donald Rumsfeld's 'known unknowns' comes to mind here. Sorry.

SCCM 2012, Intune and Windows OS Support

Similar Messages

Maybe you are looking for