SCCM 2012 is not listing the domain controller servers in the "All Systems" collection
How can I change that? Do I need to move the system from the domain controllers group to computers in AD?
If you intend to use client push for domain controllers the client push account must be a domain admin account. I suggest just manually installing the client on the domain controllers instead.
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum
Similar Messages
-
Why is it not possible to move a SCCM 2012 Server to a new Domain?
Hello everybody,
I know it is not supported to move a SCCM 2012 Server to a new Domain. But I am still missing why it is not supported or possible....
I could not find anything that explained it in detail on the forums/internet. So when the question comes up in front of a customer it is always better to have a good argumentation...Can somebody describe the reasons why??
Thank you very much in advance!Have them call CSS then.
It's ultimately the result of the design of the product but not an explicit decision. To my knowledge, it relies on the domain name for certain things and this is explicitly embedded with no defined way to change this. Could it be changed? Probably.
But, that would take a lot of work and effort and is not something Microsoft has ever invested any time in.
The grass is green and the sky is blue. Knowing why doesn't change these.
Jason | http://blog.configmgrftw.com | @jasonsandys -
Description:
A specific group of users/customers (using Windows7 OS with IE and FireFox web browsers) are facing problems with retrieving the applet File, after they upgraded the JRE on the system(PC) to JRE 1.7.0_25-b17 from JRE version 1.6.0_29-b11.
With JRE 1.7.0_25-b17 it is noticed that when the Java plugin requests for the applet File; it sends a request to the Domain Controller of the user, which causes a delay of 2 to 5 minutes and sometimes hangs. The problem occurs consistently.
The current temporary workaround for this group of users is to use JRE version 1.6.0_29-b11.
Problem analysis:
To investigate the problem the below steps were executed:
1) Collected the Java console outputbelow details from the user's system. (The complete output is not posted due to lengthy content, though can be added further to this post if required.)
(a) Works fine with JRE version 1.6.0_29-b11. Kindly refer to Java console output in the code ‘section A’ towards the end of this post.
(b) The problem occurs with problem with JRE version 1.7.0_25-b17. Kindly refer to Java console output in the code ‘section B’ towards the end of this post. The step where the problem is observed, is indicated as(##<comment>##).
2) The network settings in the user's browser was checked. Internet Options > Connections > LAN setting
The configured option is 'Use automatic configuration script' and the value is http://www.userAppX.com/proxy.pac
This configuration remains the same irrespective of the JRE version in use.
3) The network settings in the Java Control Panel was checked.
The used/selected option is "Use browser settings", although values for 'Use proxy server' and 'use automatic proxy configuration script' are filled-in as 'user-proxy.com' and 'http://www.userAppX.com/proxy.pac' respectively.
This configuration remains the same irrespective of the JRE version in use.
4) The proxy PAC file was checked and debugging was done for the request 'https://myAppletHost.com/download/...'. The FindProxyForUrl function (including the conditions defined in it, for the hostname and domain checks) returns PROXY user-proxy.com:80
5) The user also tried the below
a. Changed the option in the network settings in the browser to 'Proxy server' with Address 'user-proxy.com' and Port '80'
b. Restarted the browser.
c. Tried with Java Plug-in 1.6.0_29, JRE version 1.6.0_29-b11. There was no problem and no request to the Domain Controller of the user.
d. Tried with Java Plug-in 10.40.2.43, JRE version 1.7.0_40-b43. The problem occurs with the delay and a request to the Domain Controller of the user is observed.
Kindly refer to Java console output in the code ‘section C’ towards the end of this post.
6) The user also tried setting the below property in the Java Control panel; restarted the browser, and try with JRE 1.7.0_40-b43. The problem stil persists.
-Djava.net.preferIPv4Stack=true
7) The Global Policy Management of the Domain Controller was verified by the user. It has GPO for proxy setting but nothing related to Java security.
Questions:
The problem seems be specific to a particular (user) environment setup, and the user faces the problem when using JRE 1.7.
We would like to know if the issue is in the (user) environment setup or in JRE 1.7.
Could you please help with information/ideas/suggestions to identify the root cause and solution for this problem?
Section A:
Java Plug-in 1.6.0_29
Using JRE version 1.6.0_29-b11 Java HotSpot(TM) Client VM
User home directory = C:\Users\userA
basic: Plugin2ClassLoader.addURL parent called for https://myAppletHost.com/download/myApplet.jar
network: Connecting https://myAppletHost.com/download/myApplet.jar with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-b1bb5056c5b0e83f=2; Path=/"
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-b1bb5056c5b0e83f=2; Path=/"
security: Loading Root CA certificates from C:\Program Files (x86)\Java\jre6\lib\security\cacerts
security: Loaded Root CA certificates from C:\Program Files (x86)\Java\jre6\lib\security\cacerts
security: Loading SSL Root CA certificates from C:\Program Files (x86)\Java\jre6\lib\security\cacerts
security: Loaded SSL Root CA certificates from C:\Program Files (x86)\Java\jre6\lib\security\cacerts
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Loading certificates from Internet Explorer ROOT certificate store
security: Loaded certificates from Internet Explorer ROOT certificate store
security: Checking if certificate is in Deployment denied certificate store
network: Connecting https://myAppletHost.com/download/myApplet.jar with cookie "JSESSIONID=0000IK4bEMoqXH10zsl88rwvoRI:175oe9tjd; BCSI-CS-b1bb5056c5b0e83f=2"
network: Downloading resource: https://myAppletHost.com/download/myApplet.jar
Content-Length: 403.293
Content-Encoding: null
Dump system properties ...
https.protocols = TLSv1,SSLv3
java.vm.info = mixed mode, sharing
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 20.4-b02
javaplugin.nodotversion = 160_29
javaplugin.version = 1.6.0_29
javaplugin.vm.options =
os.arch = x86
os.name = Windows 7
os.version = 6.1
trustProxy = true
deployment.proxy.auto.config.url = http://www.userAppX.com/proxy.pac
deployment.proxy.bypass.local = false
deployment.proxy.http.host = user-proxy.com
deployment.proxy.http.port = 80
deployment.proxy.override.hosts =
deployment.proxy.same = false
deployment.proxy.type = 3
deployment.security.SSLv2Hello = false
deployment.security.SSLv3 = true
deployment.security.TLSv1 = true
deployment.security.mixcode = ENABLE
Section B:
Java Plug-in 10.25.2.17
Using JRE version 1.7.0_25-b17 Java HotSpot(TM) Client VM
User home directory = C:\Users\userA
basic: Added progress listener: sun.plugin.util.ProgressMonitorAdapter@12adac5
basic: Plugin2ClassLoader.addURL parent called for https://myAppletHost.com/download/myApplet.jar
network: Connecting https://myAppletHost.com/download/myApplet.jar with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-2d4ce94a2ae7b460=2; Path=/"
network: Connecting http://10.x.x.xx:53/ with proxy=DIRECT
(##THE ABOVE REQUEST CAUSES THE DELAY OR HANGS##)
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-2d4ce94a2ae7b460=2; Path=/"
security: Loading Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loaded Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loading SSL Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loaded SSL Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Loading certificates from Internet Explorer ROOT certificate store
security: Loaded certificates from Internet Explorer ROOT certificate store
network: Connecting https://myAppletHost.com/download/myApplet.jar with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-2d4ce94a2ae7b460=2; Path=/"
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-2d4ce94a2ae7b460=2; Path=/"
network: Connecting https://myAppletHost.com/download/myApplet.jar with cookie "JSESSIONID=0000UQuXWY5tjxjpwcKHlfJKe_8:175oe9j45; BCSI-CS-2d4ce94a2ae7b460=2"
network: ResponseCode for https://myAppletHost.com/download/myApplet.jar : 200
network: Encoding for https://myAppletHost.com/download/myApplet.jar : null
network: Server response: (length: -1, lastModified: Thu Feb xx yy:yy:yy CET 2013, downloadVersion: null, mimeType: text/plain)
network: Downloading resource: https://myAppletHost.com/download/myApplet.jar
Content-Length: -1
Content-Encoding: null
Section C:
Java Plug-in 10.40.2.43
Using JRE version 1.7.0_40-b43 Java HotSpot(TM) Client VM
User home directory = C:\Users\userA
basic: Plugin2ClassLoader.addURL parent called for https://myAppletHost.com/download/myApplet.jar
network: Connecting https://myAppletHost.com/download/myApplet.jar with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-1d67c8b6508ca09c=2; Path=/"
network: Connecting http://10.x.x.xx:53/ with proxy=DIRECT
(##THE ABOVE REQUEST CAUSES THE DELAY OR HANGS##)
network: Checking for update at: https://javadl-esd-secure.oracle.com/update/blacklist
network: Checking for update at: https://javadl-esd-secure.oracle.com/update/blacklisted.certs
network: Checking for update at: https://javadl-esd-secure.oracle.com/update/baseline.version
network: Connecting https://javadl-esd-secure.oracle.com/update/blacklist with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Connecting https://javadl-esd-secure.oracle.com/update/baseline.version with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Connecting https://javadl-esd-secure.oracle.com/update/blacklisted.certs with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
security: Loading Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loaded Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loading SSL Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loaded SSL Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
Dump system properties ...
https.protocols = TLSv1,SSLv3
java.vm.info = mixed mode, sharing
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Oracle Corporation
java.vm.specification.version = 1.7
java.vm.vendor = Oracle Corporation
java.vm.version = 24.0-b56
javaplugin.nodotversion = 10402
javaplugin.version = 10.40.2.43
os.arch = x86
os.name = Windows 7
os.version = 6.1
trustProxy = true
active.deployment.proxy.auto.config.url = http://www.userAppX.com/proxy.pac
active.deployment.proxy.bypass.local = false
active.deployment.proxy.http.host = user-proxy.com
active.deployment.proxy.http.port = 80
active.deployment.proxy.same = false
active.deployment.proxy.type = 3
deployment.browser.path = C:\Program Files (x86)\Internet Explorer\iexplore.exe
deployment.proxy.auto.config.url = http://www.userAppX.com/proxy.pac
deployment.proxy.bypass.local = false
deployment.proxy.http.host = user-proxy.com
deployment.proxy.http.port = 80
deployment.proxy.override.hosts =
deployment.proxy.same = false
deployment.proxy.type = 3
deployment.security.SSLv2Hello = false
deployment.security.SSLv3 = true
deployment.security.TLSv1 = true
deployment.security.TLSv1.1 = false
deployment.security.TLSv1.2 = false
deployment.security.authenticator = true
deployment.security.disable = false
deployment.security.level = HIGH
deployment.security.mixcode = ENABLE
PS:
Since the JRE 1.7.0_25-b17 update, it is noticed that when the Java plugin requests for the applet File; it sends a request to the Domain Controller of the user, which causes a delay of 2 to 5 minutes and sometimes hangs.
The problem occurs consistently, and also with JRE 1.7.0_45-b18.
Java Plug-in 10.45.2.18
Using JRE version 1.7.0_45-b18 Java HotSpot(TM) Client VM
User home directory = C:\Users\userA
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
cache: Initialize resource manager: com.sun.deploy.cache.ResourceProviderImpl@134a33d
basic: Added progress listener: sun.plugin.util.ProgressMonitorAdapter@1971f66
basic: Plugin2ClassLoader.addURL parent called for https://myAppletHost.com/download/myApplet.jar
network: Connecting https://myAppletHost.com/download/myApplet.jar with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-f797d4d262467220=2; Path=/"
network: Connecting http://10.x.x.xx:53/ with proxy=DIRECT
network: Connecting http://10.x.x.xx:53/ with proxy=DIRECT
(##THE ABOVE REQUEST CAUSES THE DELAY AND SOMETIMES HANGS##)My organization is experiencing very similar problems. We have resolved it through several steps.
We upgraded the client to Java 8 and we saw in the console that the hanging connection with the Domain Controller no longer occurs. This may be all that is necessary for your environment as well. -
Cant figure out the IP address of the domain controller
I just started at a new company and would like to change my domain password but cannot because I cant communicate with the domain controller. I can see it when I do a net view, but I cannot ping it because my DNS server is set to the local router IP
address rather than the DC IP address and the name simply won't resolve.
I suspect if I manually change my DNS server to point to the IP of the DC, my problem will go away. I asked the local IT guy and he says 'nobody has ever asked to change their domain password before' ???!?!?!????? nor does he have any idea about the
IP and he would have to submit a ticket to the overseas IT desk (where the DC physically resides) and they would change my password manually.
Any ideas?Robr2,
I agree with others about the ONLY DNS that must be set on ALL machines is ONLY the DC's IP address. That's it. Not the router, or the ISP's DNS. This is one of the most common configuration errors that will cause
MAJOR problems with DC to client communcations.
Here's a full explanation with a great analogy:
Active Directory's Reliance on DNS, and why you should never use an ISP's DNS address or your router as a DNS address, or any other DNS server that does not host the AD zone name
Published by Ace Fekay, MCT, MVP DS on Aug 17, 2009 at 7:35 PM 1058 2
http://msmvps.com/blogs/acefekay/archive/2009/08/17/ad-and-its-reliance-on-dns.aspx
Ace Fekay
MVP, MCT, MCITP EA, MCTS Windows 2008/R2, Exchange 2007 & Exchange 2010, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This post is provided AS-IS with no warranties or guarantees and confers no rights. -
Pricing for VM running WS 2012 E R2 primarily as domain controller for ~5 clients
Hi
I am starting a small medical clinic, with only about 6 client PCs. However, I would like a domain network structure for security purposes moving forward rather than a workgroup.
I'm looking at either purchasing a modest server (ie HP Proliant ml310) with windows server 2012 essentials r2 and using it locally (total cost ~$1500) or using a Windows Azure virtual machine to run the domain controller over a VPN. We already use
office 365 e3, so don't really need a local server for email, storage etc. I already have an old synology NAS that could be used for disk images etc that we would lose out on with the hosted server solution.
Can someone verify my calculations for monthly cost estimate I tried using the calculator --1 small VM + 225 GB storage for the OS came to $65/month
Would I be able to run it on the small virtual machine or would I need to go up to medium just for the OS? If the later is the case it would definitely not be cost effective.
Thanks for the help
TMhi tdiddy,
Thanks for posting!
About VM and azure storage pricing , I suggest you could refer to this pricing details page and calculations fee:
http://azure.microsoft.com/en-us/pricing/details/virtual-machines/
http://azure.microsoft.com/en-us/pricing/details/storage/
Also, for this billing question Please contact azure billing support team via
http://www.windowsazure.com/en-us/support/contact/
Hope it helps.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Windows 2012 Verification of prerequisites for Domain Controller promotion failed
Windows 2012 Verification of prerequisites for Domain Controller promotion failed and gave the below error(In computer management local group and user option is not there as suggested by a solution!)
"Verification of prerequisites for Domain Controller promotion failed. The local Administrator account becomes the domain Administrator account when you create a new domain. The new domain cannot be created because the local Administrator account password
does not meet requirements.
Currently, the local Administrator password is blank, which might lead to security issues. We recommend that you press Ctrl+Alt+Delete, use the net user command-line tool, or use Local Users and Groups to set a strong password for the local Administrator
account before you create the new domain."OK, the reason you see this error is because when you set up and configured your Windows R2 environment you may have logged into the OS with an account other than Administrator. So, if you created your log in account named Bob, this is throwing off the Server.
So, hit Ctrl-Alt-Delete, and look who you are logged in as, and then change the account you are logging in as and use the local Administrator account. What you may find is that the default Admin account password has not been set.
Check that out and see if that is what you are experiencing.
Best wishes -
Hi
We are migrating from old domain to new domain. Before live migration, we are trying to check the ACE/ACL migration through SubInACL. We are running the SubInACL on a cluster, which is a member of the Old Domain (Test Domain). We are able to resolve and
ping both Old Domain and the New domain from this cluster machine. We have created a network share on this cluster, which is accessible to all Domain Users of the Old Domain. Both Domains have two way forest level trust. we are trying to migrate
the ACL of this share (\\ClusterMachine\testshare$) to the new domain using SubInACL. We are trying to run the below command to get it done.
subinacl /outputlog=C:\Users\Administrator\Desktop\Migrationlog.txt /subdirectories
\\ClusterMachine\testshare$\*.* /migratetodomain=OldDomain=NewDomain=mappingfile.txt
Mapping file contains : Domain Users=NewDomain_Users
But we are geeting the Error that "1210 could not find a domain controller for domain "Test Domain". Error finding domain name : 1210 the format of the specified computer name is invalid. Current Object "\\ClusterMachine\testshare$"
will not be processed."Hello,
how in detail is DNS set up in each domain?
Any problems when using nslookup to verify?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
Process MAD.EXE (PID=1932). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC).
Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge Base article 218185, "Microsoft LDAP Error Codes." Use the information in that article to learn more about
the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.
Process MAD.EXE (PID=1932). All Domain Controller Servers in use are not responding:
DC02.targetiletisim.local
DC01.targetiletisim.local
Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=1148). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge
Base article 218185, "Microsoft LDAP Error Codes." Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.
pls help me :(Hi,
Please use dcdiag and nltest to test the connectivity.
BTW, have you disabled ipv6 on Exchange Server.
Thanks,
Simon Wu
TechNet Community Support -
Im getting error "Unable to find domain controller for the specified domain. Please explicitly specify the domain controller." when I try to create an AD connection for my User Profile Service. The entire sharepoint environment is installed
on one server. That server has everyting on it, AD, SQL, Sharepoint, and its the domain controller. I cant figure out why this will not identify?Trevor FielderHi,
Did you get this error when clicking on the Populate Containers button?
If yes, please make sure that you have provide the domain credentials in the account name and password
boxes below when entering the domain information. The account must be granted the replicating directory changes permission on the domain.
You can refer to this blog:
http://www.harbar.net/articles/sp2010ups.aspx
Xue-Mei Chang -
Migration of SCCM 2012 SP1 to SCCM 2012 R2 in a new domain.
I am wondering if it is possible to migrate objects from a SCCM 2012 SP1 server in one domain to a new SCCM 2012 R2 server in another domain ?
I read this article, but it does not state this particular combination.
http://technet.microsoft.com/en-us/library/gg682006.aspx
Thx
ThomasFor Migrate from SCCM 2012 SP1 to SCCM 2012 R2 in same environment/Domain, it's support and applicable.
But migrate to new domain, it's not support. Also you can't migrate database for new domain or object. you will need to rebuild it.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
SCCM 2012 does not detect MS14-001 KB2837577 as required
SCCM 2012 does not detect MS14-001 KB2837577 (Security Update for Microsoft SharePoint Server 2010) as being required. I am able to install it manually. However, I would expect and like this to be deployed via System Center Configuration Manager.
Hi,
You might also need to analyze the updates installation logs on the client to see whether there are any useful information. (UpdatesStore.log, UpdatesHandler.log, UpdateDeployment.log and WUAHandler.log)
http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_SU_NAPLog
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
hi
i have sharepoint 2013 enterprise over sql server 2012 standard, and i want to create some reports trhought excel services and performance point using EffectiveUserName feature, but right actually my environment is not working, when a configure an excel
to read a SSAS cube from my local machine the rol is ok, but when i published the excel and try to update from Internet Explorer this error is presenting
XML for Analysis parser: The Domain\User' value of the 'EffectiveUserName' XML for Analysis property is not valid.
Anybody can helpme is urgent find out for some solution
thanks a lotTurns out that you need the SP Farm service account to be an admin on the SSAS server as well. That fixed the problem for us.
MS: Please update your documentation :) -
Hi,
I am getting an Error “Test Agent could not connect to the test controller”
while configuring The Test Agent on Client machine.
Pre-requisite used:
VS2012 update 4, Test agent & Test controller of same version used
User has TFS admin access.
Same user id used for configuring Test Agent.
Description:
Test controller is installed on server A. I want to install test agent on client machine B.
Windows Fire wall is OFF on both Machines A & B. While configuring Test Agent below error is occurred:
“Test Agent could not connect to the test controller”
In log file error was “I, 2015/04/02, 15:32:21.723, Could not get the status from the test agent. Exception: Failed to connect to an IPC Port: The system cannot find the file specified.”
In Event viewer below error details given:
Unable to connect to the controller on ‘My Server: 6901’. The agent can connect to the controller but the controller cannot connect to the agent because of following reason: The requested name is valid, but no data of the requested type was found.
Make sure that the firewall on the test agent machine is not blocking the connection.
Could you please help me to find solution?
Thanks in advance!
Kanchan M
KanchanHi Kanchan,
So on each computer, you create a local user account that is a member of the Administrators group, and use the same account and password on each machine(controller and Agent), am I right?
Could you enable the detailed log message?
http://blogs.msdn.com/b/aseemb/archive/2010/03/07/how-to-enable-test-agent-logs.aspx
http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
>>In log file error was “I, 2015/04/02, 15:32:21.723, Could not get the status from the test agent. Exception: Failed to connect to an IPC Port: The system cannot find the file specified.”I
met a similar issue before which was related to the Firewall exceptions, maybe you could refer to it here:
http://stackoverflow.com/questions/12249093/test-agent-could-not-connect-to-the-test-controller-vs2012-agents
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Anyone notice that text/iMessages are not listed by contact's name but the contact phone number now after 5.0.1?
Yes, I just noticed this after upgrading to 5.0.1. That's why I came here to this forum. I tried re-syncing with address book, but it didn't help. Not only is my text messages only showing phone numbers, instead of contact names, but my call log is doing that as well.
-
When the domain controller locator process happened
HI Guys
I read lots of articles about how domain controller located. And so far i thougth i knew most of the process, but still have some question.
1.when the DC locator happend ,just start during computer boots up ,or started after user press CTRL+ALT+DEL and input username and credential.
2.Based on following Technet article , step 7, what's the difference between "If the client has found a DC in the site in which the DC claims the client is located" and "If the returned domain controller is in the cloest site "
? And step 8, if the domain that is being quried is same as the domain that the computer joined, was the first domain means the domain the user belongs to ? like xxx\username ?Hi Jacky,
I assume that you are talking about this article:
Active Directory: Using Catch-All Subnets in Active Directory
http://technet.microsoft.com/en-us/forefront/2009.06.subnets.aspx
>when the DC locator happend ,just start during computer boots up ,or started after user press CTRL+ALT+DEL and input username and credential.
The DC locator initiates after we input domain credentials and press Enter.
>what's the difference between "If the client has found a DC in the site in which the DC claims the client is located" and "If the returned domain controller is in the closest site "?
“If the client has found a DC in the site in which the DC claims the client is located” means that the client and a DC are located in the same site. “If the returned domain controller is in the closest site” means that a DC which
is located in the closest site is found (based on site link cost).
>if the domain that is being queried is same as the domain that the computer joined, was the first domain means the domain the user belongs to ? like xxx\username ?
Yes you are right that the first domain means the user account which tries to log on belongs to.
More information for you:
Enabling Clients to Locate the Next Closest Domain Controller
http://technet.microsoft.com/en-us/library/cc733142(v=WS.10).aspx
I hope this helps.
Amy
Maybe you are looking for
-
Ical moving item in week view to next week view - can you drag it
i like to drag items not completed from a week view to the next week view, but as with Office 2007 you cant just drag the event from the week view to the months calendar view on the side and drop it into a new date. I know if you use month view, it m
-
How come i cant get this flash to STAY in my system>? i have a 64 bit system and it always says i "need plug in", plus it is linked to a google entire suiete of bull CRAP,when all i want to do is have my flash working properly.i unchecked the google
-
Invalid document number [RCT2.DocEntry][line: 1]
I'm getting this error when creating Invoice then Incoming payment. Though, in the other transaction it successfully saved. Here's my code in incoming payment .Invoices.DocEntry = oDocNum '<--- it was retrieved by oCompany
-
Hello Guys Can any one of u please let me know whether planning can be dont on ODS also? Actually We use transaction cubes for planning in the same way can we use transactional ODS? Any one of u please explain me in 2 to three sentences.. k then adva
-
I am begging any Tech Genius out there to help me out. I have a 3-year old (10GB) Ipod which after the 7.0 upgrade started giving me the message "ITunes cannot read the contents of the Ipod 'Podcasts.' Go to the summary tab in Ipod preferences and cl