SCCM 2012: mainteance windows?

Hi,
What happens when you don't set any maintenance window in SCCM 2012?
I thought it would mean "any time is a good time" (what is our goal), is that correct?
J.
Jan Hoedt

Take a look at the following article which covers Business Hours v Maintenance Windows for an explanation of the differences.
http://blogs.technet.com/b/server-cloud/archive/2012/03/28/business-hours-vs-maintenance-windows-with-system-center-2012-configuration-manager.aspx
Cheers
Paul | sccmentor.wordpress.com

Similar Messages

SCCM 2012 and Windows 8.1 OSD

Dear all,
I am planning to upgrade my current site (2012 SP1) to either SP1 CU4 or R2. This is to support Windows 8.1 OSD
My Question is :
i) is it worth just upgrading to Cu4 to allow this? or would it be better to schedule the full upgrade to R2?
from what I have read R2 is a more substantial upgrade
thanks in advance

I believe that it is best practice to deploy the latest version of software, unless there is a specific reason not to do so.
You are right. The upgrade to R2 is more substantial than just applying the CU. You have to, for example, uninstall ADK 8.0 and install ADK 8.1. However you might as well do this upgrade now rather than later.
I have described the R2 upgrade process in detail here
http://www.gerryhampsoncm.blogspot.ie/2013/10/in-place-upgrade-sccm-2012-sp1-to-r2.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Prestaged OSD using SCCM 2012 SP1 windows Partition variable is not being set

Hello All I need some assistance with a workaround.
I am using a presaged task sequence created from a working network / PXE deployment TS for windows 7.
This TS sets a variable for the OS partition called "Windows" and the value is set in the Partition Disk task.
Problem is this value is not being read from a prestaged due to the OEMMedia condition skipping this partition and format task.
Question is how do I get it to read and or set the value for that partition?
From what I have found on Google this was an issue in beta of MDT but was fixed in RTM. I am not using MDT TS but I do have it installed. Any idea if this is a known issue with SCCM 2012 sp1 TS?
Edit: also noticed that the variable's case is different and will not let me change it.
Variable under format is "windows" variable under Apply OS is "Windows" when I change them to be the same then close and reopen they revert back to the above. Are these variables case sensitive?
Edit: for now I have changed it from variable to next available partition. I tested it twice so far it seems to be using the correct partition and it remains to be called the C drive. For now this will be my solution.

When you say "presaged task sequence created from a working network / PXE deployment TS" are you saying this is still a network boot process? Or have you done "Create Task Sequence Media"?
Dustin Estes - MCP
yes when i say prestaged that is using the create task sequence media then selecting prestaged.

SCCM 2012 deploy windows 7: how to manage network/server load?

Hi,
Hypotetically, if you would deploy Windows 7 to hundreds of pc’s at once, how could you manage that, regarding organizing the deploy, regarding network/server load? F.e. you deploy to a collection which has 500 pc’s, users can select when
to load the OS (Windows XP, we deploy the SCCM 2012 client, they can choose when to install)
*How can you be sure network is not overloaded?
*Can you limit in SCCM 2012 bandwith usage?
Please advise.
J.
Jan Hoedt

You need to be as local as possible. You can host a deployment point role on a client OS such as windows 7 so you could temporarily setup one machine hosting OS images and then rebuild it last as well.
On a 100MB LAN with DP's hosted in a datacenter (not on subnet) we get to about 75 machines building at once before we see TFTP timeouts on PXE booting due to load on the local network. I would get your build as quick as possible and then do them in increasing
block sizes whilst monitoring the network and server load.
To speed up builds you could...
Build and capture to get a WIM file with most apps and updates in it.
Change the TFTPBlockSize registry settings on the DP's (If PXE booting) to as high as it will go
Host WIM files on your DP's with the Package share settings configured and enable the "Access content directly..." option in the Apply Operating System part of your task sequence.
Hope this helps.
Shaun

SCCM 2012 Setting Windows Update GP's

Hopefully this is a simple one.
I have setup WSUS with SCCM 2012 and currently its sole purpose is for updating our WIM images however... It seems though that all of our devices that have the SCCM 2012 client installed are having their windows updates local group policy settings changed
to our distribution point and all other setting changed to not configured(overriding the settings the admins previously had in place).
I don't want the sccm client to make changes to the windows update local group policy... how can I accomplish this?

We are using a separate WSUS server to manage updates on servers and clients.
In the near future I'll attempt to transition to the WSUS I have integrated with SCCM.
For regular client machines we're pushing the windows update GP's but for our servers the system admin are managing those themselves depending on how they want windows updates to behave on their systems.

AMT 3.2.10 Clients with SCCM 2012 on Windows 2012

Hey
I have a couple of HP dc7800 computers with Intel's AMT/vPro that I'd like to provision with SCCM 2012. The installed firmware version is 3.2.10 which is a supported version according to the documentation [1]. Provisioning of newer clients (5.2.x upwards)
is successful, so I can rule out all the usual suspects like the provisioning certificate from GoDaddy, our internal CA, DHCP options, etc. Provisioning with SCCM 2007 of both 3.2.x and 5.x AMT devices is also still successful.
The amtopmgr.log repeatedly shows the following entries:
Provision target is indicated with SMS resource id. (MachineId = 16777325 WS45.mydomain.ch)
Found valid basic machine property for machine id = 16777325.
Warning: Currently we don't support mutual auth. Change to TLS server auth mode.
The provision mode for device WS45.mydomain.ch is 1.
The IP addresses of the host WS45.mydomain.ch are x.x.x.x.
Root hash of provisioning certificate is 2796BAE63F1801E277261BA0D77770028F20EEE4.
Attempting to establish connection with target device using SOAP.
Create provisionHelper with (Hash: 74B7792EDBD64EBB01E2E3A0B27FAFA04C2D3BCB)
Set credential on provisionHelper...
Try to use provisioning account to connect target machine WS45.mydomain.ch...
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
**** Error 0x37f2b370 returned by ApplyControlToken
Fail to connect and get core version of machine WS45.mydomain.ch using provisioning account #0.
Try to use default factory account to connect target machine WS45.mydomain.ch...
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
**** Error 0x37f2b370 returned by ApplyControlToken
Fail to connect and get core version of machine WS45.mydomain.ch using default factory account.
Try to use provisioned account (random generated password) to connect target machine WS45.mydomain.ch...
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
**** Error 0x37f2b370 returned by ApplyControlToken
Fail to connect and get core version of machine WS45.mydomain.ch using provisioned account (random generated password).
Error: Device internal error. This may be caused by: 1. blabla...
Error: Can NOT establish connection with target device. (MachineId = 16777325)
After some investigation with Wireshark, I've found out that SCCM tries connect with TLSv1 to the AMT device. The response from the device is immediately an SSL alert (internal error). Using OpenSSL, I could connect to the device if I explicitly told it
to use SSLv3. This leads me to believe that the 3.2.x firmware cannot handle TLSv1 correctly and SCCM never tries to connect with SSLv3 after a failure.
So the question is: How can I get SCCM 2012 to provision these devices?
Regards,
Ingo
[1]
http://technet.microsoft.com/en-us/library/c1e93ef9-761f-4f60-8372-df9bf5009be0#BKMK_SupConfigOOB

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Sccm 2012 R2 - Windows 7 not listening on Port 80

Hello,
In looking through smsts.log and IIS logs I saw a lot of error communicating on Port 80. When tried to telnet from a pc to our sccm 2012 server using port 80, it goes through fine. But when I tried it the other way around, it fails. When
I ran netstat -an |find /i "listening" on my pc and others around me, I discover port 80 isn't listening. The firewall is off on both the pcs and sccm primary server. Port 80 isn't blocked on the network.
TCP     0.0.0.0:135            0.0.0.0:0              LISTENING
TCP     0.0.0.0:445            0.0.0.0:0              LISTENING
TCP     0.0.0.0:1025           0.0.0.0:0              LISTENING
TCP     0.0.0.0:1026           0.0.0.0:0              LISTENING
TCP     0.0.0.0:1027           0.0.0.0:0              LISTENING
TCP     0.0.0.0:1028           0.0.0.0:0              LISTENING
TCP     0.0.0.0:1036           0.0.0.0:0              LISTENING
TCP     0.0.0.0:1041           0.0.0.0:0              LISTENING
TCP     0.0.0.0:1057           0.0.0.0:0              LISTENING
TCP     0.0.0.0:3389           0.0.0.0:0              LISTENING
TCP     0.0.0.0:5357           0.0.0.0:0              LISTENING
TCP    127.0.0.1:5020          0.0.0.0:0              LISTENING
TCP     127.0.0.1:5354         0.0.0.0:0              LISTENING
TCP     127.0.0.1:27015        0.0.0.0:0              LISTENING
TCP     127.0.0.1:62522        0.0.0.0:0              LISTENING
TCP     172.24.94.131:139      0.0.0.0:0              LISTENING
TCP     172.24.102.23:139      0.0.0.0:0              LISTENING
TCP     [::]:135               [::]:0
LISTENING
TCP     [::]:445               [::]:0
LISTENING
TCP     [::]:1025              [::]:0
LISTENING
TCP     [::]:1026              [::]:0
LISTENING
TCP     [::]:1027              [::]:0
LISTENING
TCP     [::]:1028              [::]:0
LISTENING
TCP     [::]:1036              [::]:0
LISTENING
TCP     [::]:1042              [::]:0
LISTENING
TCP     [::]:1057              [::]:0
LISTENING
TCP     [::]:3389              [::]:0                 LISTENING
TCP     [::]:5357              [::]:0
LISTENING
I was told something has to initiate port 80 being open on win7. Is this true? If so, any idea why sccm isn't doing this? I could switch to port 8530 (have to do this for wsus too), but would think networking would have to open this port and then again,
would the pc listen for it?
PS, The sccm position before this one, dealt with Servers, that must have had port 80 listening.

After installing SCCM client via Task Sequence, and rebooting, the Self-signed certificate never comes down so the other Action items in Cinfiguration Manager Properties never come down. The only way I can get the Certificate to come down (seen in
MMC) is to give full permission (No one had rights initially) to rsa keys folder, delete smscfg.ini file and restart the sms host service. But if you go into configuration manager properties the client certificate is still shown as None. The locationServices.log
shows :failed to send management point list location request message to Primary Server/MP. If try
http://PrimaryServer it fails to connect from a pc. But if I try it from the primary server sccm01 it works fine. Port 80 is open on the network.
smsts shows:
Sending with winhttp Failed; 80072ee2 and also socket connect failed; 8007274c
Is there any other logs I can send you to help resolve this?
Again, Thanks so much for all of your help!!!
Mark

[SCCM 2012 R2] Windows Update Agent do not scan correctly thus SCCM has bad reports

Hi All,
My colleagues reported that after manual download and installation of update Office 2010 SP2 ... SCCM still do not report as Installed:
https://support.microsoft.com/en-us/kb/2687455
KB2687455 update on SCCM is reported as:
Update ID: 9c5e43a3-3ae9-434d-b105-a9d7902d5f9f
Update Title: Service Pack 2 for Microsoft Office 2010 (KB2687455) 32-Bit Edition
Test Computer:
After investigation I found out that Windows Update Agent (verbose logging) is reporting that this update is really not installed: Agent Update {9C5E43A3-3AE9-434D-B105-A9D7902D5F9F} is deployed for scan, and is installable. It will be reported
as installable.
Update KB2687455 is shown in Programs and Features/Installed Updates as installed on this computer.
Question:
This update is MSP (not standard update) so it cannot be queried by win32_quickfixengineering WMI class. How to query all installed updates on system (registry, API, ...)?
How WUA query ALL installed updates?
Thank you in advance.
Regards,

Hi,
You could check the version number. The version number of Office 2010 SP2 is greater than or equal to
14.0.7015.1000.
The script in the blog below could get List of installed Windows / office Updates.
http://www.blackforce.co.uk/2013/01/27/get-list-of-installed-windows-office-updates-command-line
The sample in the following article can be used to determine if a critical security update is installed on a computer. If the update isn't installed, the user can ensure that the update is downloaded and installed. The user can also ensure that
they are notified about the status of the installation.
https://msdn.microsoft.com/en-us/library/windows/desktop/aa387101(v=vs.85).aspx
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft
does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCCM 2012 RTM & Windows Mobile 6.5 device inventory

Hi all
I have an issue collecting the right hardware information on these devices. I have setup device enrollment which works fine but I can't get it to inventory either the IMEI of the device or phone number.
Looking at the hardware inventory classes I cant seem to find anything relating to IMEI or phone number under mobile device classes.
Am I going to have to go down the custom mof route? Searching around it seems that IMEI and number collection was in SCCM 2007 but can't find it in 2012...
Any help would be greatly appreciated.

Hi Panu
Thanks for your response, it seems that the Device ID field is blank on the harware inventories for my 6.5 devices :( So far I have tried a Psion EP10 and a HTC HD2 both with the same results.
Unfortunately Activesync is not an option due to additional licensing costs and with the number of devices being rolled out it would take us over our Exchange standard mailbox limit.
Looks like I have 2 slightly different problems then:
1) Why is the device ID not being returned?
2) Do I need to create a custom mof file to collect the phone number?

SCCM 2012 - Maintenance Windows Issue with Update Deployment using Task Sequence

Hi Guys,
I have a question for you!!
We use a Task Sequence to deploy "Patch Tuesday" security fix; we use the integrated step "Install Software Update" and the Task Sequence run during Maintenance Windows (1 hour).
We notice that the time remaining is not recalculated on every software update installation occur (http://blogs.technet.com/b/csloyan/archive/2010/10/24/maintenance-window-calculations-explained.aspx);
it's correct?
The formula indicated in the link above is not considered in this type of software update deployment (Install Software Update task sequence step)?
Thanks a lot.
David

Hi,
Any update?
Is the time remaining recalculated after each update is installed when using the Software Update Group directly as Torsten said?
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Applocker with Windows Installer rules and SCCM 2012

Hi,
We have been running Applocker since two years on Windows 7 Enterprise clients with SCCM 2007 as management and distribution tool.
This setup was working fine until we migrated to SCCM 2012 and started to encounter problems with msi-packages not being able to self-heal when the source was the sccm client cache.
We have recreated this scenario in a lab environment.
Our setup is this:
Windows 2008 R2 (DC)
Windows 7 Enterprise SP1 (Client)
Standard user (not admin)
SCCM 2012 R2 (upgraded from 2007)
Applocker with these rules:
Executable Default rules enabled (Enforced)
Windows Installer Default rules enabled (Enforced)
Exception for %WINDIR% (where SCCM cache is located)
Script Default Rules enabled (Enforced)
Application msi-package with self-heal (omus) and advertised shortcuts
We install the application from the sccm cache (%windir%\ccmcache) and then trigger a self-heal (user components being copied to the user profile).
What we see on the client is: Error 1718. File C:\Windows\ccmcache\54\application.msi was rejected by digital signature policy.
Event log is showing: Event 1008: The installation of
C:\Windows\ccmcache\54\application.msi
is not permitted due to an error in software restriction policy processing. The object cannot be trusted.
It looks like the file cannot be evaluated by Applocker and therefore is not trusted. We get an Access Denied error when testing AppLocker-policy with the following PS-command,
Get-AppLockerPolicy -Effective | Test-AppLockerPolicy -Path C:\Windows\ccmcache\54\application.msi. This command works fine when accessing files in the cache-folder on a SCCM2007-client.
For testing purposes we recreated a similar folder structure: C:\Windows\Folder1\Folder2\application.msi where the user has no permissions on Folder2 and read on the other folders and the File.msi.
This is how the permissions look like in SCCM 2012 (no user permissions on %Windir%\ccmcache). Applocker cannot evaluate the trust-level of application.msi.
The GPO setting “Bypass traverse checking” is set to everyone.
As we can see, the permissions are the same on SCCM 2007 client cache (%Windir%\syswow64\ccm\cache) but we do not have this issue there.
Has anyone got Applocker (with windows installer rules actived) to work with SCCM 2012 and windows installer self-heal?

More info. I found some people also encounter this same issue, but specific msi, take a look at
http://social.technet.microsoft.com/Forums/windowsserver/en-US/2ad92754-f01e-410e-97db-7a9bc81586db/msiinstaller-event-1008-when-trying-to-install-3ds-max-2011-after-group-policies-apply-on-domain?forum=winserverGP
Juke Chou
TechNet Community Support

Client Install Issue - SCCM 2012 R2 - Manual Deploy Installed ok

Hello, I have sccm 2012 configured with 2,000 machine approx. It is been used mainly as a Software Deployment tool for now. On checking a recent IE10 upgrade, I noticed that there is a number of machines that do not have the client installed (and thus did
not upgrade IE). I picked 1 machine, searched in SCCM - had no client. I checked all relevant settings:
Boundary for Client in question - ok
Local Client Settings (ip,dns,no firewall, ping sccm ok and vice versa etc).
Once i right clicked to deploy the client, it installed no problem. I checked the ccmsetup log file and the only info it had was from the time that the client was manually deployed (I will attach the log below anyway). I am really puzzled as to why the client
did not install and if this is the issue why IE is not upgrading (it is hard to pinpoint as there are 250 sites approx). The automatic install task works no problem on other machines once the machine goes online.
Any help, would be great. Here is the log (I am fairly new to SCCM btw):
SCCM 2012 R2 - Windows 7 SP1 32 Bit
==========[ ccmsetup started in process 7196 ]==========   ccmsetup   05/02/2015 16:28:39   4100 (0x1004)
Running on platform X86   ccmsetup   05/02/2015 16:28:39   4100 (0x1004)
Launch from folder C:\Windows\ccmsetup\   ccmsetup   05/02/2015 16:28:39   4100 (0x1004)
CcmSetup version: 5.0.7958.1401   ccmsetup   05/02/2015 16:28:39   4100 (0x1004)
In ServiceMain   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
Running on 'Microsoft Windows 7 Enterprise ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /ForceInstall /config:MobileClient.tcf   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /ForceInstall /config:MobileClient.tcf   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
SslState value: 224   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
CCMHTTPPORT:    80   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
CCMHTTPSPORT:    443   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
CCMHTTPSSTATE:    224   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
CCMHTTPSCERTNAME:       ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
FSP:    COLSCCM01.LC-UK.ORG   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
CCMFIRSTCERT:    1   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
Config file:      C:\Windows\ccmsetup\MobileClientUnicode.tcf   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
Retry time:       10 minute(s)   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
MSI log file:     C:\Windows\ccmsetup\Logs\client.msi.log   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
MSI properties:    INSTALL="ALL" SMSSITECODE="COL" FSP="COLSCCM01.LC-UK.ORG" SMSCACHESIZE="10240" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"
ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
Source List:   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
                  \\COLSCCM01.lc-uk.org\SMSClient   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
                  \\COLSCCM01.LC-UK.ORG\SMSClient   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
MPs:   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
                  COLSCCM01.lc-uk.org   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
No version of the client is currently detected.   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
Folder 'Microsoft\Configuration Manager' not found. Task does not exist.   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
Updated security on object C:\Windows\ccmsetup\.   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
Sending Fallback Status Point message to 'COLSCCM01.LC-UK.ORG', STATEID='100'.   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
Failed to get client version for sending messages to FSP. Error 0x8004100e   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
Params to send FSP message '5.0.7958.1401 Deployment '   ccmsetup   05/02/2015 16:28:39   500 (0x01F4)
State message with TopicType 800 and TopicId {19607F6A-0C46-488C-B28D-36640FB0DF94} has been sent to the FSP   FSPStateMessage   05/02/2015 16:28:40   500 (0x01F4)
Running as user "SYSTEM"   ccmsetup   05/02/2015 16:28:40   500 (0x01F4)
Detected 434753 MB free disk space on system drive.   ccmsetup   05/02/2015 16:28:40   500 (0x01F4)
Checking Write Filter Status.   ccmsetup   05/02/2015 16:28:40   500 (0x01F4)
This is not a supported write filter device. We are not in a write filter maintenance mode.   ccmsetup   05/02/2015 16:28:40   500 (0x01F4)
Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=COL))'   ccmsetup   05/02/2015 16:28:40   500 (0x01F4)
OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>COL</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=COL FSP=colsccm01.lc-uk.org SMSCACHESIZE=10240</CommandLine> </CCM><FSP> <FSPServer>COLSCCM01.lc-uk.org</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState"
Value="0" /></Capabilities><Domain Value="lc-uk.org" /><Forest Value="lc-uk.org" /></ClientOperationalSettings>'   ccmsetup   05/02/2015 16:28:41   500
(0x01F4)
Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown.   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
The MP name retrieved is 'COLSCCM01.lc-uk.org' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>'   ccmsetup
05/02/2015 16:28:41   500 (0x01F4)
MP 'COLSCCM01.lc-uk.org' is compatible   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
Retrieved 1 MP records from AD for site 'COL'   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
Retrived site version '5.00.7958.1000' from AD for site 'COL'   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
SiteCode:         COL   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
SiteVersion:      5.00.7958.1000   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
Only one MP COLSCCM01.lc-uk.org is specified. Use it.   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
Searching for DP locations from MP(s)...   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
Current AD site of machine is Millbank   LocationServices   05/02/2015 16:28:41   500 (0x01F4)
Local Machine is joined to an AD domain   LocationServices   05/02/2015 16:28:41   500 (0x01F4)
Current AD forest name is lc-uk.org, domain name is lc-uk.org   LocationServices   05/02/2015 16:28:41   500 (0x01F4)
DhcpGetOriginalSubnetMask entry point is supported.   LocationServices   05/02/2015 16:28:41   500 (0x01F4)
Begin checking Alternate Network Configuration   LocationServices   05/02/2015 16:28:41   500 (0x01F4)
Finished checking Alternate Network Configuration   LocationServices   05/02/2015 16:28:41   500 (0x01F4)
Adapter {743579BD-D66A-4BF9-B487-2AAC075B9473} is DHCP enabled. Checking quarantine status.   LocationServices   05/02/2015 16:28:41   500 (0x01F4)
Adapter {8F25ACE0-AE8A-45DD-BF3D-F1315E2B9974} is DHCP enabled. Checking quarantine status.   LocationServices   05/02/2015 16:28:41   500 (0x01F4)
Adapter {8AE4D673-90E8-4FCF-AE50-79474ADC6190} is DHCP enabled. Checking quarantine status.   LocationServices   05/02/2015 16:28:41   500 (0x01F4)
Adapter {9AA2CA9C-0C0A-48E3-B67E-F9E574AE9DB2} is DHCP enabled. Checking quarantine status.   LocationServices   05/02/2015 16:28:41   500 (0x01F4)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="COL"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
    <ADSite Name="Millbank"/>
    <Forest Name="lc-uk.org"/>
    <Domain Name="lc-uk.org"/>
    <IPAddresses>
<IPAddress SubnetAddress="10.103.38.0" Address="10.103.38.10"/>
    </IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
'   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
Sending message header '<Msg SchemaVersion="1.1"><ID>{57972056-54D4-461F-B818-D3420A0B5C51}</ID><SourceHost>LCD14572</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:LCD14572:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>COLSCCM01.lc-uk.org</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-02-05T16:28:41Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1084"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>'   ccmsetup   05/02/2015
16:28:41   500 (0x01F4)
CCM_POST 'HTTP://COLSCCM01.lc-uk.org/ccm_system/request'   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ'   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
Received header '<Msg SchemaVersion="1.1">
   <ID>{48D22538-0FEA-44E6-AAD2-1829DDED2223}</ID>
   <SourceID>GUID:A5143C3E-EA22-4B93-BFF5-B8B859F869F5</SourceID>
   <SourceHost>COLSCCM01</SourceHost>
   <TargetAddress>direct:LCD14572:LS_ReplyLocations</TargetAddress>
   <ReplyTo>MP_LocationManager</ReplyTo>
   <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
   <Priority>3</Priority>
   <Timeout>600</Timeout>
   <TargetHost>LCD14572</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-02-05T16:28:39Z</SentTime><Body
Type="ByteRange" Offset="0" Length="2378"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature">3082019106092A864886F70D010702A08201823082017E020101310B300906052B0E03021A0500300B06092A864886F70D0107013182015D30820159020101303630223112301006035504031309434F4C5343434D3031310C300A06035504031303534D5302106A638C8D6A89DE904525D14326BE4DB0300906052B0E03021A0500300D06092A864886F70D01010105000482010027BAE95F5B0DD9F75743E1E40A189091900F78F19367C2A8328F823C63F24229608E7CF02FF2FE76FC61C6A61EF0FE8F19AC75755B88124B13964AE58F971DAB67E47B4DDCAA943B4C27F7AF9B5A0AD1DE956A3AACA26965F5FDAC8659E6263DBB55E025FB305C665AC1AA49972CC937A757EC14F1097DA27AB9998D7CAE332EC135A937A80285C87448AD7B4F4ED059063BCB5032920C65CE16FD32475CD395B279021F62E5C3B534697EDCD68A98D2A654379CCA17056F7B4FAB0346242CE56681F405DB9700FD766FDBD584BB69A4AC088BF3B971BE8B05B723701A22B9D76BB5C063F1BD32B56DB7B3BDC6D827E3D90106F3C1145E04B0629528EA24BD37</Property><Property
Name="AuthSenderMachine">COLSCCM01;COLSCCM01.lc-uk.org;</Property><Property Name="MPSiteCode">COL</Property></Hook></Hooks><Payload Type="inline"/></Msg>'   ccmsetup
05/02/2015 16:28:41   500 (0x01F4)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="COL" MasterSiteCode="COL"
SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002" Signature="http://COLSCCM01.lc-uk.org/SMS_DP_SMSSIG$/COL00002"/><ADSite
Name="Millbank"/><IPSubnets><IPSubnet Address="10.20.0.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>COLSCCM01.lc-uk.org</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage
FullPackageID="COL00002" FullPackageVersion="2" FullPackageHash="DB3D5D115FC93F6275817FB9791864D98D4AF6897339B9D4AB1C0DE456C240A8" MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false"
LastModifiedTime="30376953;932870912" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'   ccmsetup   05/02/2015
16:28:41   500 (0x01F4)
Found local location 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002'   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
Discovered 1 local DP locations.   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
PROPFIND 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002'   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
Got 401 challenge Retrying with Windows Auth...   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
PROPFIND 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002'   ccmsetup   05/02/2015 16:28:41   500 (0x01F4)
Using DP location http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
GET 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002/ccmsetup.cab'   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Got 401 challenge Retrying with Windows Auth...   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
GET 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002/ccmsetup.cab'   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from manifest   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000'   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Site version '5.00.7958.1000' is compatible. Client deployment will continue.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Location 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002' passed site version check.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Successfully loaded ccmsetup manifest file.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1401'   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Running from temp downloaded folder or manifest is not newer than ccmsetup.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'i386/vcredist_x86.exe' is applicable. Add to the list.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'x64/vcredist_x64.exe' is not applicable.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'i386/vc50727_x86.exe' is applicable. Add to the list.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'x64/vc50727_x64.exe' is not applicable.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'i386/WindowsUpdateAgent30-x86.exe' is applicable. Add to the list.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'x64/WindowsUpdateAgent30-x64.exe' is not applicable.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'i386/msxml6.msi' is applicable. Add to the list.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'x64/msxml6_x64.msi' is not applicable.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'i386/msrdcoob_x86.exe' is not applicable.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'x64/msrdcoob_amd64.exe' is not applicable.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'pkgmgr.exe' is not applicable.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'dism.exe' is applicable. Add to the list.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'wimgapi.msi' is not applicable.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'i386/MicrosoftPolicyPlatformSetup.msi' is applicable. Add to the list.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'x64/MicrosoftPolicyPlatformSetup.msi' is not applicable.   ccmsetup   05/02/2015 16:28:42   500 (0x01F4)
Item 'i386/WindowsFirewallConfigurationProvider.msi' is applicable. Add to the list.   ccmsetup   05/02/2015 1

Hi, Yes i had a look at the log yesterday. there are errors initially, but then the install completes. I can copy the whole log here, the machine in question is LCD14572. If you could take a look would be great. Still doesnt explain why i had to manually
push the client though:
Execute query exec [sp_CP_GetPushRequestMachineResource] 2097154539   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:05:58   3648 (0x0E40)
Execute query exec [sp_CP_GetPushMachineName] 2097154539   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:05:58   3648 (0x0E40)
Received request: "2097154539" for machine name: "LCD15000" on queue: "Retry".   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:05:58   3648 (0x0E40)
Stored request "2097154539", machine name "LCD15000", in queue "Processing".   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:05:58   3648 (0x0E40)
Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154539, 1   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:05:58   3648 (0x0E40)
----- Started a new CCR processing thread. Thread ID is 0x12d8. There are now 1 processing threads   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   3648 (0x0E40)
Submitted request successfully   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   3648 (0x0E40)
Getting a new request from queue "Retry" after 100 millisecond delay.   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   3648 (0x0E40)
Found CCR "2097154540.ccr" in queue "Retry".   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   3648 (0x0E40)
======>Begin Processing request: "2097154539", machine name: "LCD15000"   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   4824 (0x12D8)
Execute query exec [sp_IsMPAvailable] N'COL'   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   4824 (0x12D8)
---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   4824 (0x12D8)
---> Attempting to connect to administrative share '\\LCD15000\admin$' using account 'LC-UK\VAdmin'   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   4824 (0x12D8)
Execute query exec [sp_CP_GetPushRequestMachine] 2097154540   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   3648 (0x0E40)
Successfully retrieved information for machine LCD14589 from DB   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   3648 (0x0E40)
Execute query exec [sp_CP_GetPushRequestMachineIP] 2097154540   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   3648 (0x0E40)
Execute query exec [sp_CP_GetPushRequestMachineResource] 2097154540   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   3648 (0x0E40)
Execute query exec [sp_CP_GetPushMachineName] 2097154540   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   3648 (0x0E40)
Received request: "2097154540" for machine name: "LCD14589" on queue: "Retry".   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   3648 (0x0E40)
Stored request "2097154540", machine name "LCD14589", in queue "Processing".   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   3648 (0x0E40)
Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154540, 1   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:00   3648 (0x0E40)
----- Started a new CCR processing thread. Thread ID is 0x1d10. There are now 2 processing threads   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   3648 (0x0E40)
Submitted request successfully   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   3648 (0x0E40)
Getting a new request from queue "Retry" after 100 millisecond delay.   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   3648 (0x0E40)
Found CCR "2097154542.ccr" in queue "Retry".   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   3648 (0x0E40)
======>Begin Processing request: "2097154540", machine name: "LCD14589"   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   7440 (0x1D10)
Execute query exec [sp_IsMPAvailable] N'COL'   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   7440 (0x1D10)
---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   7440 (0x1D10)
---> Attempting to connect to administrative share '\\LCD14589\admin$' using account 'LC-UK\VAdmin'   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   7440 (0x1D10)
Execute query exec [sp_CP_GetPushRequestMachine] 2097154542   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   3648 (0x0E40)
Successfully retrieved information for machine LCD14571 from DB   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   3648 (0x0E40)
Execute query exec [sp_CP_GetPushRequestMachineIP] 2097154542   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   3648 (0x0E40)
Execute query exec [sp_CP_GetPushRequestMachineResource] 2097154542   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   3648 (0x0E40)
Execute query exec [sp_CP_GetPushMachineName] 2097154542   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   3648 (0x0E40)
Received request: "2097154542" for machine name: "LCD14571" on queue: "Retry".   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   3648 (0x0E40)
Stored request "2097154542", machine name "LCD14571", in queue "Processing".   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   3648 (0x0E40)
Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154542, 1   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:02   3648 (0x0E40)
----- Started a new CCR processing thread. Thread ID is 0x1768. There are now 3 processing threads   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:04   3648 (0x0E40)
Submitted request successfully   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:04   3648 (0x0E40)
Getting a new request from queue "Retry" after 100 millisecond delay.   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:04   3648 (0x0E40)
Sleeping for 60 minutes for queue "Retry".   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:04   3648 (0x0E40)
======>Begin Processing request: "2097154542", machine name: "LCD14571"   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:04   5992 (0x1768)
Execute query exec [sp_IsMPAvailable] N'COL'   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:05   5992 (0x1768)
---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:05   5992 (0x1768)
---> Attempting to connect to administrative share '\\LCD14571\admin$' using account 'LC-UK\VAdmin'   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:05   5992 (0x1768)
---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:21   4824 (0x12D8)
---> The device LCD15000 does not exist on the network. Giving up   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:21   4824 (0x12D8)
---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:21   4824 (0x12D8)
---> Attempting to connect to administrative share '\\LCD15000.lc-uk.org\admin$' using account 'LC-UK\VAdmin'   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:21   4824 (0x12D8)
---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:23   7440 (0x1D10)
---> The device LCD14589 does not exist on the network. Giving up   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:23   7440 (0x1D10)
---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:23   7440 (0x1D10)
---> Attempting to connect to administrative share '\\LCD14589.lc-uk.org\admin$' using account 'LC-UK\VAdmin'   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:23   7440 (0x1D10)
---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:26   5992 (0x1768)
---> The device LCD14571 does not exist on the network. Giving up   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:26   5992 (0x1768)
---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:26   5992 (0x1768)
---> Attempting to connect to administrative share '\\LCD14571.lc-uk.org\admin$' using account 'LC-UK\VAdmin'   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:26   5992 (0x1768)
---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:47   4824 (0x12D8)
---> The device LCD15000.lc-uk.org does not exist on the network. Giving up   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:47   4824 (0x12D8)
---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:47   4824 (0x12D8)
---> Attempting to connect to administrative share '\\LCD15000\admin$' using account 'LC-UK\VAdmin'   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:47   4824 (0x12D8)
---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:47   4824 (0x12D8)
---> The device LCD15000 does not exist on the network. Giving up   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:47   4824 (0x12D8)
---> ERROR: Unable to access target machine for request: "2097154539", machine name: "LCD15000", access denied or invalid network path.   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:47
4824 (0x12D8)
Execute query exec [sp_CP_SetLastErrorCode] 2097154539, 53   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:47   4824 (0x12D8)
Stored request "2097154539", machine name "LCD15000", in queue "Retry".   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:47   4824 (0x12D8)
Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154539, 2   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:47   4824 (0x12D8)
Execute query exec [sp_CP_SetLatest] 2097154539, N'02/05/2015 16:06:47', 2   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:47   4824 (0x12D8)
<======End request: "2097154539", machine name: "LCD15000".   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:47   4824 (0x12D8)
---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:51   7440 (0x1D10)
---> The device LCD14589.lc-uk.org does not exist on the network. Giving up   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:51   7440 (0x1D10)
---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:51   7440 (0x1D10)
---> Attempting to connect to administrative share '\\LCD14589\admin$' using account 'LC-UK\VAdmin'   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:51   7440 (0x1D10)
---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:51   7440 (0x1D10)
---> The device LCD14589 does not exist on the network. Giving up   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:51   7440 (0x1D10)
---> ERROR: Unable to access target machine for request: "2097154540", machine name: "LCD14589", access denied or invalid network path.   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:51
7440 (0x1D10)
Execute query exec [sp_CP_SetLastErrorCode] 2097154540, 53   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:51   7440 (0x1D10)
Stored request "2097154540", machine name "LCD14589", in queue "Retry".   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:51   7440 (0x1D10)
Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154540, 2   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:51   7440 (0x1D10)
Execute query exec [sp_CP_SetLatest] 2097154540, N'02/05/2015 16:06:51', 2   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:51   7440 (0x1D10)
<======End request: "2097154540", machine name: "LCD14589".   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:51   7440 (0x1D10)
---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:55   5992 (0x1768)
---> The device LCD14571.lc-uk.org does not exist on the network. Giving up   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:55   5992 (0x1768)
---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:55   5992 (0x1768)
---> Attempting to connect to administrative share '\\LCD14571\admin$' using account 'LC-UK\VAdmin'   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:55   5992 (0x1768)
---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:55   5992 (0x1768)
---> The device LCD14571 does not exist on the network. Giving up   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:55   5992 (0x1768)
---> ERROR: Unable to access target machine for request: "2097154542", machine name: "LCD14571", access denied or invalid network path.   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:55
5992 (0x1768)
Execute query exec [sp_CP_SetLastErrorCode] 2097154542, 53   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:55   5992 (0x1768)
Stored request "2097154542", machine name "LCD14571", in queue "Retry".   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:55   5992 (0x1768)
Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154542, 2   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:55   5992 (0x1768)
Execute query exec [sp_CP_SetLatest] 2097154542, N'02/05/2015 16:06:55', 2   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:55   5992 (0x1768)
<======End request: "2097154542", machine name: "LCD14571".   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:06:55   5992 (0x1768)
CCR count in queue "Retry" is 3.   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:07:42   6564 (0x19A4)
Sleeping for 634 seconds...   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:07:43   6564 (0x19A4)
Thread has been inactive too long. Closing thread   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:16:47   4824 (0x12D8)
--- This thread is terminating due to inactivity   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:16:47   4824 (0x12D8)
----- Terminated CCR processing thread. There are now 2 processing threads   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:16:47   4824 (0x12D8)
Thread has been inactive too long. Closing thread   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:16:51   7440 (0x1D10)
--- This thread is terminating due to inactivity   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:16:51   7440 (0x1D10)
----- Terminated CCR processing thread. There are now 1 processing threads   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:16:51   7440 (0x1D10)
Thread has been inactive too long. Closing thread   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:16:55   5992 (0x1768)
--- This thread is terminating due to inactivity   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:16:55   5992 (0x1768)
----- Terminated CCR processing thread. There are now 0 processing threads   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:16:55   5992 (0x1768)
Sleeping for 1 seconds...   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:16   6564 (0x19A4)
The Site Control File has not changed since the last parameter update.   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:17   6564 (0x19A4)
Updating Site Parameters   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
MP Ports: 80   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
IISPreferedPort: 80   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
MP SSL Ports: 443   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
IISSSLPreferedPort: 443   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
Default MP: COLSCCM01.lc-uk.org   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
Default MP Type: 1   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
Default MP: [None]   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
Certificate Selection Criteria:   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
Certificate Store:   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
SSL State: 224   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
Select First Certificate: 1   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
Certificate Issuers:   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
Checking configuration information for server: COLSCCM01.LC-UK.ORG.   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
Checking configuration information for server: COLSCCM01.LC-UK.ORG.   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
Fallback Status Point: COLSCCM01.lc-uk.org   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
Install on DC: False   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
Option for installing using IP address: 0   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
Sleeping for 1200 seconds...   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:18:18   6564 (0x19A4)
Waiting for change in directory "D:\Program Files\Microsoft Configuration Manager\inboxes\ccr.box" for queue "Incoming", (30 minute backup timeout).   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:23:39
2876 (0x0B3C)
Execute query exec [sp_CP_GetNewPushMachines] N'COL'   SMS_CLIENT_CONFIG_MANAGER   05/02/2015 16:28:09   2876 (0x0B3C)
Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154468, 1   SMS_CLIENT_CONF

Sccm client v4 wont install and install client v5 - SCCM 2012 R2

Hi, I am coming to the end of a SCCM 2012 R2 client deployment. I have come across 2 machines (so far)that have the SCCM 2007 (v4) client installed, and although the task is set to uninstall from the server the v5 client will not installed. iI have been
using this an as template:
http://eskonr.com/2010/11/sccm-client-installation-troubleshooting-steps-check-list/
I have ran the install seperatelty from the server (boxed ticked - Uninstall existing Config Manager client) - No Install
The ccmsetup folder is created - c$\Windows\ccmsetup, but only has 3 files, no logs folder
Other machines on site has the v5 client
Checked ping from client to server and vice versa (no firewall enabled)
Boundaries/Schema/DNS - ok
Checked all local event logs.
i know you can run the local uninstall command, but as the network is vast i would like to fix to come from the server, rather than having to do this on the client.
Any tips would be great going forward.
SCCM 2012 R2 - Windows 7 Enterprise SP1

Hi,
I ensured the account used for the install was in the local admins group.
From the ccm.log on the server, i got these erros, been googling but nothing yet:
---> ERROR: Unable to start service "ccmsetup" on machine "LCD12121", error = 1075.   SMS_CLIENT_CONFIG_MANAGER   22/10/2014 12:01:43   1460 (0x05B4)
---> Failed to install CCM Client Bootstrap component on client (1075)   SMS_CLIENT_CONFIG_MANAGER   22/10/2014 12:01:43   1460 (0x05B4)
Execute query exec [sp_CP_SetLastErrorCode] 2097153910, 1075   SMS_CLIENT_CONFIG_MANAGER   22/10/2014 12:01:43   1460 (0x05B4)
Also, is there a way to run a report on which machines dont have the sccm client/install issues?
Thanks

SCCM 2012 R2 - Application Deployment - on startup

Hi, I would like to deploy Office 2010 Pro Plus and Lync 2013. Both packages have already been created and tested. I would like to set the install to occur on machine startup. Right now, if i add the machine to the AD Group set for the Lync and Office installs,
it installs randomly during the day on a test machine.
As I am new to SCCM, how can i set the install to occur on machine startup. It doesnt make sense to install Office during the day while a person is using it! I will be able to pinpoint which machines require Office 2010 installed before I install Lync 2013.
If you need anymore info from me, as the above may not be clear, please let me know
Thanks
SCCM 2012 R2/Windows 7 Enterprise/Office 2010 Pro Plus/Lync 2013

Hi,
If you create the Office package as a package/program then you can set it to run on Computer startup, applications cannot be deployed that way.
However, using at computer startup often gives very low number on actual installs becuase if the user logs in directly when the computer startup the installation will not run.
I normally use PSAppdeploymen toolkit and prompt the user to close running office applications prior to the upgrade, then the user can postpone the installation as well and much much more.
https://psappdeploytoolkit.codeplex.com/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Want to test OSD in Vmware Workstation SCCm 2012

Which Drivers needed and where to get VMware scsi controller drivers ,I got .flp file but don't know how to extract that
can any one provide link from where I can get Drivers needed for OSD in VMware workstation with SCCM 2012 for windows 7.

Narcoticoo is on the right track. VMWare have a process for this.
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2032184
You could use HyperV or Oracle VirtualBox - absolutely no drivers required to develop your solution..
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
VMware has process of it's own, but my method works on every situation if you want to grab drivers from the installed OS.

SCCM 2012: mainteance windows?

Similar Messages

Maybe you are looking for