Sccm 2012 oSD report

hi  any one please help me on below requirementss
i need to create an Operating system deplyement report  from which ican select start date and end date  so this report will show the osd completed  with success and failure  ,iam not able to see such reports
some one kindly help me to generate osd report
ankith

hi
I have a query on task sequence execution  status can any one help adding inner join to get host name
ip addtess and mac address 
select * from dbo.v_TaskExecutionStatus
where LastStatusMessageIDName ='The task sequence execution engine successfully completed a task sequence'
ankith

Similar Messages

  • SCCM 2012 R2 Report Viewer not working.

    I have recently upgraded to SCCM 2012 R2 and now when I go to the reports I get this message. Has anyone come across this?
    The
    DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an
    error: The encryption type requested is not supported by the KDC.
    (rsRuntimeErrorInExpression)

    I found the solution.
    http://www.netdavidic.com/2013/11/how-to-fix-sccm-2012-r2-reporting.html#!/2013/11/how-to-fix-sccm-2012-r2-reporting.html

  • SCCM 2012 OSD Task Sequence - force Policy and SCEP update?

    Hi,
    How can I force a policy update to update machine policy and scep definitions at the end of
    SCCM 2012 OSD Task Sequence,
    Thanks,
    Ward.

    Hi,
    I normally use this solution from Chris Nackers to deploy the latest EP definitions during OSD and deploy a custom EP policy, it works great. The policy will be downloaded when the client is registered.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • SCCM 2012 OSD task sequence condition

    Is there a way to set a condition on a step that looks to see if the machine is already known to SCCM / Active Directory?
    I have a step that names the PC using ITX Solutions AutoName function. I want to say only use this step if the machine is not known.

    This is essentially a follow on to: http://social.technet.microsoft.com/Forums/en-US/3c6f37ad-b3dc-4219-ae7f-e6c51f05d5bf/sccm-2012-osd-retain-computer-name-on-reimage-rebuild?forum=configmanagerosd
    To my knowledge, there is nothing explicitly built-in; however, you might be able to check _SMSTSMachineName to see if it matches the default WinPE naming convention of MINNIT_* or _SMSTSClientGUID to see if it has a value.
    You could also put a task in before the format and partition step to check for an existing installation.
    Jason | http://blog.configmgrftw.com

  • SCCM 2012 R2 - Reporting Services Point installation - "The Datasource does not exist"

    Hi all,
    Quick bit of background, we have SCCM 2012 R2 installed on a Windows 2012 R2 server. We have the SQL back end off box, configured on a SQL 2012 R2 server running on a Windows Server 2012 R2 cluster. Then there is yet another server which runs the reporting
    services. I've just tried installing the Reporting Services Point on the srs server but it doesn't appear to have worked that well. Here's the info i've got back: 
    A] Site Status > Reporting services point:
    SMS_SITE_SYSTEM_STATUS_SUMMERIZER
    Site System Status Summarizer detected that the availability of the "Reporting services point" role on server "\\NA-SQLR01.in.tna.local" has changed to Failed.
    B] The last message from the SMS_SRS_REPORTING_POINT Component Status is "Site Component Manager successfully installed this component on this site system"
    C] Here's the first chunk of info which appears in the srsrp.log file:
    SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT as thread ID 4204 (0x106C).
    This is a SRS Reporting Point Role as SRSRP registry key exists.
    Waiting for changes for 0 minutes
    Timed Out...
    Set configuration
    Check state
    Check server health.
    Successfully created srsserver SMS_
    Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
    Reporting Services is running
    The DataSource does not exist.
    [sqlserver.local\SQL1] [SCCM_XXX] [ConfigMgr_XXX] [sqlreportserver.LOCAL]
    [SQL2012] [1] [] [xxx\SCCM2012Server]
    Confirmed version [11.0.5058.0] for the Sql Srs Instance.
    System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~   at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
    Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~   at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
    Extract resource language packs if exists
    Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
    Looking for 'English (United Kingdom)' resources
    Looking for 'English' resources
    Found resources for 'English'
    System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~   at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
    Item, Property[] Properties, Guid batchId)~   at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
    System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
    'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~   at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~   at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
    Folder, String Parent, Property[] Properties)
    (!) SRS root folder was reported missing
    STATMSG: ID=7405 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SRS_REPORTING_POINT" SYS=sqlreportserver.LOCAL SITE=P01 PID=2120 TID=4204 GMTDATE=Wed Apr 08 08:56:05.349 2015 ISTR0="ConfigMgr_XXX" ISTR1="sqlreportserver.LOCAL"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
        WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
        WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
    Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
    Registry change
    Waiting for changes for 1 minutes
    After this point i simply get the following info messages looping endlessly:
    Set configuration
    Check state
    Check server health.
    Successfully created srsserver
    Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
    Reporting Services is running
    The DataSource does not exist.
    [sqlreportserverlocal\SQL1] [SCCM_XXX] [ConfigMgr_P01] [sqlreportserver.LOCAL]
    [SQL2012] [1] [] [XX\SCCM2012Server]
    [1] [0]
    Confirmed version [11.0.5058.0] for the Sql Srs Instance.
    System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~   at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
    Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~   at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
    Extract resource language packs if exists
    Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
    Looking for 'English (United Kingdom)' resources
    Looking for 'English' resources
    Found resources for 'English'
    System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_P01' cannot be found.~   at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
    Item, Property[] Properties, Guid batchId)~   at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
    System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
    'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~   at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~   at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
    Folder, String Parent, Property[] Properties)
    (!) SRS root folder was reported missing
    Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
    Registry change
    Waiting for changes for 1 minutes
    Has anyone come across this issue before? Must admit, I'm not too hot on the sql side of things so any advice or suggestions would be greatly appreciated. Thanks in advance!

    Hi guys, cheers for the swift response.
    Garth, i can access SSRS in IE from the SCCM box and it looks a-ok.
    Paul, nope can't say I've done any configuration of reporting services - the whole thing has been set up by the database team. Having had a trundle through Reporting Services Configuration Manager, it seems the Database team have set up SSRS in line with
    the walkthrough you posted.
    Since i'm not seeing the ConfigMgr_XXX folder appear in SSRS I'm wondering if there's something preventing SCCM from being able to create it. The message
    "Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions
    granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation" sounds like the account SCCM is leveraging to perform the install might not have the right permissions in SSRS. Do i need to delegate specific rights to the NT
    AUTHORITY\SYSTEM account in SRS perhaps?

  • SCCM 2012 R2 - Reporting Services question

    In testing SCCM 2012, I put it on a an existing remote SQL instance. This server also housed SCOM among other applications. I set up reporting services successfully and got reports working.
    A few months later I decided to setup and test reporting in SCOM for Audit Collection Services (ACS). I did not know at the time but SCOM takes over SSRS and makes it unusable for any other application. This broke my SCCM reporting. I finally reinstalled
    SSRS and got rid of the SCOM piece and all is back to normal.
    I am now planning for deployment in production. Our DB team wants to stick the DB for SCCM on a server that will house many other databases (eventually). 
    My question is: Does SCCM reporting play well with others? That is, if I set up SSRS on a SQL server with other applications - should I request that SCCM is the only application using that particular SSRS instance? Or should it be ok to reside on an SSRS
    instance that may eventually house other applications (NOT SCOM). 
    Thanks in advance!

    a couple hundred clients; base specs for the primary server; and it would be a VM
    With all that said, I think our DB team still wants us to use their remote SQL server (physical) so I will probably go with that as it is still supported and our environment will be relatively tiny compared to typical SCCM deployments. Of course, if there
    are known issues or advisories against having a remote SQL please let me know (and provide a link). 
    My main concern was using this remote SQL server and setting up SSRS and having other applications conflicting with it. As long as SCCM plays well with others - I am good to go. Thanks for the replies. 

  • SCCM 2012 R2 Reporting issue updating SQL Reporting permissions

    I am in the process of setting up SCCM 2012 R2.  I am having an issue with the SCCM reporting.  If I set the permissions in the SCCM console, the permissions do not propagate to the SQL reporting... I get this... This is from SRSRP.log...
    Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_DIT $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.384+300><thread=5432 (0x1538)>
    (!) Error retrieving folders - [A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The target principal name is incorrect.)]. $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.438+300><thread=5432 (0x1538)>
    No folder configuration information found. $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.441+300><thread=5432 (0x1538)>
    Does anyone know how to fix?
    I tried removing and re-installing the reporting point, changing the permissions in SQL Server... and a dozen other things.

    I am in the process of setting up SCCM 2012 R2.  I am having an issue with the SCCM reporting.  If I set the permissions in the SCCM console, the permissions do not propagate to the SQL reporting... I get this... This is from SRSRP.log...
    Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_DIT  $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.384+300><thread=5432 (0x1538)>
    (!) Error retrieving folders - [A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The target principal name is incorrect.)].  $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.438+300><thread=5432 (0x1538)>
    No folder configuration information found.  $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.441+300><thread=5432 (0x1538)>
    Does anyone know how to fix?
    I tried removing and re-installing the reporting point, changing the permissions in SQL Server... and a dozen other things.

  • SCCM 2012 R2 Reporting error

    hi all,
    some report I can open and others I get an error:
    Microsoft.Reporting.WinForms.ReportServerException
    An error has occurred during report processing. (rsProcessingAborted)
    Stack Trace:
       at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
       at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
       at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
       at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
       at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
    Microsoft.Reporting.WinForms.ReportServerException
    Cannot read the next data row for the dataset DataSet1. (rsErrorReadingNextDataRow)
    Stack Trace:
       at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
       at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
       at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
       at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
       at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
    Microsoft.Reporting.WinForms.ReportServerException
    Conversion failed when converting the nvarchar value 'S-1-5-21-159793906-1513374725-7473742-7662' to data type int.
    Stack Trace:
       at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
       at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
       at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
       at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
       at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
    how can I solve this error?
    thanks

    I had the exact same problem.
    I found 2 solutions to this, where the first solution was temporary.
    Try to change the RegKey HKLM\SOFTWARE\Microsoft\SMS\SRSRP\EnableRbacReporting from 1
    à 0. Then run the report again, it should run normally. In my case it did change back to 1 after some time and turned out to be a temporary fix. But it provided an explanation why this happened
    after the R2 upgrade and actually it breaks the new reports RBAC feature of R2.
    The second solution I found in this thread:
    http://social.technet.microsoft.com/Forums/en-US/ae08aa43-054d-47e7-99fb-c4f101962478/reports-not-working-after-upgrade-to-sccm-2012-r2-?forum=configmanagergeneral
    Just read the explanation and run the mofcomp command.
    It did the trick for me J

  • Any major changes to the database for SCCM 2012 and Reporting?

    I'm in the process of migrating my custom reports from SCCM 2007 to SCCM 2012. I wonder if all the tables / views in SCCM 2007 are the same in SCCM 2012 for my reporting purposes? So far everything I've migrated over appears to work without a problem.
    Orange County District Attorney

    Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
    The SQL schema for SCCM 2012 has been released here.
    https://technet.microsoft.com/en-us/library/dn581978.aspx
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • SCCM 2012 SP1 Report Permissions required

    Hello Everyone.. Im having trouble running any reports off of the SCCM Console. So far I have full permissions in the SCCM console, and on SQL Server I am a sysadmin. Here is my error when I run it through report builder:
    System.Web.Services.Protocols.SoapException: The permissions granted to user 'DTTLA\eguerrero' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DTTLA\eguerrero' are insufficient for performing this operation.   at Microsoft.ReportingServices.Library.ReportingService2010Impl.CreateReportEditSession(String Report, String Parent, Byte[] Definition, String& EditSessionID, Warning[]& Warnings)   at Microsoft.ReportingServices.WebServer.ReportingService2010.CreateReportEditSession(String Report, String Parent, Byte[] Definition, String& EditSessionID, Warning[]& Warnings)----------------------------The permissions granted to user 'DTTLA\eguerrero' are insufficient for performing this operation.
    And here is the error when I run it through the Configuration Manager:
    Microsoft.Reporting.WinForms.ReportServerExceptionAn error has occurred during report processing. (rsProcessingAborted)Stack Trace:   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)-------------------------------Microsoft.Reporting.WinForms.ReportServerExceptionCannot impersonate user for data source 'AutoGen__5C6358F2_4BB6_4a1b_A16E_8D96795D8602_'. (rsErrorImpersonatingUser)Stack Trace:   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)-------------------------------Microsoft.Reporting.WinForms.ReportServerExceptionLog on failed. Ensure the user name and password are correct. (rsLogonFailed)Stack Trace:   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)-------------------------------Microsoft.Reporting.WinForms.ReportServerExceptionThe user name or password is incorrectStack Trace:   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)-------------------------------
    Does anyone have an idea where I'm forgetting to assign permissions?

    Check the properties of your Reporting Point. See the user that is configured to connect to the data source. This user must have a SQL login (eg sysadmin)
    See here
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/dc47c82b-41aa-4b6a-990f-0c0264aa33a2/error-message-when-trying-to-open-reports-on-the-sccm-2012-console-and-ie-browser-sql-server-2008
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • SCCM 2012 R2 Report using WMI Query

    I am trying to find out if I can generate a report to show which users installed what software using a report in SCCM 2012 R2 and a WMI Query.
    If not using the reporting within SCCM, then:
    1)  is it possible to pull such data via a wmi query
    2)  any suggestions how to do so?
    3)  Desktop OS is either Windows 7 or 8 or 8.1 Enterprise x64
    Thanks,
    Dave
    David Lakey

    You Can Create Query With the Software name but you can Know Which Computer and you can add System Resource as the Last login name
    This for Example:-
    From monitoring--> Create New Query--> Edit Query Statement --> Show Query Language
    past the following:- 
    select SMS_R_System.NetbiosName, 
    SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from  
    SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on 
    SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceId = 
    SMS_R_System.ResourceId where 
    SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName like "%Visio%"
    After that in General you can add in Results Tap:-
    System Source and the Attribute Will be last Login name

  • SCCM 2012 OSD; Not finding driver package during deployment

    I've been having some trouble setting up my OSD deployment using SCCM 2012 and hope someone can point me in the right direction.  Specifically I am having trouble with device driver deployment while deploying my reference image. 
    I am running SCCM Config Manager 2012 SP1 CU2. This is running on a Server 2012 VM with SQL 2012.  I am building an OSD deployment and have successfully captured my reference image.  I am not sure if it matters, but I manually built a reference
    PC and using capture media (USB stick), I successfully captured my reference image.  I have imported my drivers for the target PC into Config Manager and into a driver package.  The driver package has been deployed to the distribution point
    (DP).  I checked the status of the driver package within the console and verified it has been deployed to the DP.   I created a new task sequence (TS) to deploy the captured wim.  Within the TS, I added an "Apply
    Driver Package" step and pointed it to the aforementioned driver package.  I added a WMI query to the step as follows
    select * from Win32_ComputerSystem where Model like "HP Probook 6570b%." 
    Incidentally, I did a wmi query on the target PC to verify the model.  I deployed the TS to the unknown computers collection and PXE booted the target PC.  I ran through the OSD wizard and while OSD is verifying the deployment prerequisites,
    the deployment fails with the error, "The task sequence cannot be run because a package referenced by the task sequence could not be found."  I checked the smsts.log log and found the following:
    Failed to find CCM_SoftwareDistribution object for AdvertID="CT120043", PackageID="CT100044", ProgramID="*"
    After some research I found this error means Config Manager cannot find the driver package (PackageID="CT100044")
    for deployment.  After more research I have done the following:
    Deleted the Driver Package and recreated it and updated the TS step to point to this package.
    Deleted and recreated the TS along with the driver package.
    Recreated the driver package and distributed content, only importing the NIC drivers as a way to make a simple test.
    When distributing content I verified it was successfully completed each time as per the console.
    Each time I recreated the driver package and the OSD failed, smsts.log is showing the appropriate package ID in the error.  If I disable the Apply Driver Package step and configure a Apply Device Drivers step to install the best matched compatible drivers
    and limit the driver matching to the specific driver package, the OSD completes but the drivers do not install. It is as if Config Manager is not seeing the imported drivers at all.
    I have run out of options to try and hope someone can help point me in the next direction to take.  After reading numerous forums and guides, I am sure I am doing the OSD steps correctly but I am apparently missing something.
    Thanks in advance,
    Mike G.

    Thanks for responding.
    Yes after I posted the question I right-clicked on the driver package, and selected to update distribution points.  I checked now (about 12 hours later) and the package is showing it has not finished updating.  I checked the content status and
    it is "waiting for content."  I looked at distmgr.log and I found an error "Failed to start DP health monitoring task for package 'CT100044'. Error code: -1".  This error would occur every 30 min after each time the DP retried to process
    the package. After some research I found a post stating a file called "Microsoft" or "Program" on located on the root of the site server could cause this and renaming or deleting the file would resolve this. I renamed the file and after the next time
    it retried, the error cleared, however the package status is still waiting for content.  I tried doing a validation on the package but so far there has been no change.

  • SCCM 2012 OSD Task Sequence Fails "An error occurred while retrieving policy for this computer"

    We have SCCM 2012 R2. I amm trying to start OSD task sequence from bootable media.
    Hyper-v client gets DHCP ip and starts MDT bootable media, but could not find policy.
    From F8 I can ping SCCM/DP/MP server.
    What could be the cause?

    Yes, this DHCP client is in the same subnet as other working clients.
    smsts.log from client
    Request was successful. TSPxe
    21.03.2014 14:14:14 324 (0x0144)
    pNext != NULL, HRESULT=80004005 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,1970)
    TSPxe 21.03.2014 14:14:14
    324 (0x0144)
    reply has no message header marker TSPxe
    21.03.2014 14:14:14 324 (0x0144)
    DoRequest (sReply, true), HRESULT=80004005 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,5868)
    TSPxe 21.03.2014 14:14:14
    324 (0x0144)
    Failed to get client identity (80004005)
    TSPxe 21.03.2014 14:14:14
    324 (0x0144)
    ClientIdentity.RequestClientIdentity (), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,1113)
    TSPxe 21.03.2014 14:14:14
    324 (0x0144)
    failed to request for client
    TSPxe 21.03.2014 14:14:14
    324 (0x0144)
    Exiting TSMediaWizardControl::GetPolicy. TSPxe
    21.03.2014 14:14:14 324 (0x0144)

  • Sccm 2012 create report from recently installed software on clients

    As stated in this thread for 2007. Has anyone had any luck with this type of report in 2012?
    http://social.technet.microsoft.com/Forums/en-US/fecbe492-6d9d-4a8e-8d6d-ac12b3364b32/sccm-2007-create-report-from-recently-installed-software-on-clients?forum=configmgrreporting

    As stated in this thread for 2007. Has anyone had any luck with this type of report in 2012?
    http://social.technet.microsoft.com/Forums/en-US/fecbe492-6d9d-4a8e-8d6d-ac12b3364b32/sccm-2007-create-report-from-recently-installed-software-on-clients?forum=configmgrreporting
    It worked perfectly in CM12. What is the problem?
    http://www.enhansoft.com/

  • SCCM 2012 R2 Reports not activate Value button and not showing Visio and Project products

    Hello,
    I have experiencing some problems with SCCM reports
    1)  In some of the reports the "Values" button is disabled and because of that I can not select the name of a specific computer, the reports I've noticed that are relating to Specific Computers
    2) The other problem is that when reviewing a software inventory report on a specific computer, Visio nor the Project of Microsoft Office does not appear , which itself can be seen from the Resource Browser
    I will appreciate it very much to help me to solve these drawbacks presented in the reports of SCCM 2012 R2.
    Thanks in advance.
    Manuel
    Manuel&#180;s Microsoft Forums Threads

    open the report in the report builder tool (in the console, right click and edit. From the reports web page you can click the drop down and choose open with report builder) and examine the query that is being used to populate the computername
    values list. You should be able to run that query from the report builder utility to see if anything is being returned. For the report you mention, there is no query to bring back computer names. In report builder, in the left hand menu, open the parameters
    folder, then right click @variable from the list and open the properties. Go to the available values item in the menu of the properties window and notice that the available values is set to none, not get values from a query. That is why you can't click on
    Values in the SSRS report and get a list of computer Names. You could add a query into the report and save the report if you really want a drop down list of all computer names. I would save the report with a different name if I were to take that approach,
    it is not a good practice to modify the built in reports.
    Regarding the applications you are not seeing, you will have to look at the query contained in the report, and determine if that query is targeting the same view or data that you were looking at using resource explorer. Which category within resource
    explorer were you seeing the information you were expecting to see in this report? You can use report builder to see that the report you are looking at is calling a function to return the software titles, and that function looks to be based on the v_gs_softwareproduct
    view. If you were looking at software files or add/remove programs within the resource viewer, you won't necessarily see the same information in the report, since the report is reading a different view.
    I hope this info will help you to troubleshoot report quirks. SCCM 2012 reporting is a world apart from SCCM 2007 reporting. There are alot more stored procedures and functions used in SCCM 2012, and even a dll file on the reporting point that is required
    for some (most) of the reports!

Maybe you are looking for

  • Cash book and bank book - functional specs

    Hi, I have one more issue. my client has given some format for cash book and bank book format. they need that these two should come in SAP could you please tell me how to write Functional spec for this and how to develop through abaper

  • Program to find all active services in SICF

    Hi all,      Anyone can help me out in finding all the active services in SICF.Is there any program or transaction available for that? Thanks Senthil

  • Dynamic select Position in SEM BCS

    Hi all! How I can dynamic select Position in SEM BCS, when I Load from Data streem and data type equal Changes in Investee Equity?

  • Mac OS X failed to launch JavaFX jar due to fatal errors

    Hi, I am running Mac OS X 10.7.5 on VMware player. I have installed these on my system - 1. I have jdk-7u12-ea-bin-b07-macosx-x86_64-27_dec_2012.dmg 2. jre-7u10-macosx-x64.dmg 3. netbeans-7.2.1-ml-javase-macosx.dmg I have set java Java Home pointing

  • No page button

    In Acrobat Pro 9.1, I no longer have a page button in the column on the left. So pages cannot be removed, added, etc. How do I get the page button back on the column?