SCCM 2012: push client sccm 2007 client worked but then no deployment is reaching the client

Hi,
We upgraded an sccm 2007 client to sccm 2012 and are deploying a tasks sequence to it.
However, the task sequence is not appearing. Also we cannot connect via client center tools.
Sccm 2012 client seemed to have installed correctly.
Please advise what logfiles to check.
J.
Jan Hoedt

Sccm 2012 client seemed to have installed correctly.
"Seemed to install" or did it really install? Nothing has changed logfile-wise from CM07 to CM12: ccmsetup.log can still be used to examine if the client was installed successfully. LocationServices.log, ClientIDManageStartup.log etc for further communication
troubleshooting.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

SCCM 2012 SP1 to SCCM 2012 R2 - Side by Side

Hi Friends,
Currently our SCCM infrastructure is running with a CAS site, 2 Primary Sites and 8 Secondary sites with SCCM 2012 SP1. Now we want to update this infrastructure from SCCM 2012 SP1 to 2012 R2. But we want remove CAS site and to keep only single Primary Site.
Can this be done in Side by Side migration from SCCM 2012 SP1 to SCCM 2012 R2 ? If yes then please suggest how to migrate all data (Packages/Clients) from SCCM 2012 SP1 to new infra on SCCM 2012 R2.
Thanks in advance.

You don't have many (supported) options here. Detaching a site is not possible, so indeed your only option left is to migrate. Problem here is that the supported scenario is from a ConfigMgr 2012 R2 site to a ConfigMgr 2012 R2 site (see:
http://technet.microsoft.com/en-us/library/gg682006.aspx). That means you should first upgrade your old environment before you can start with your migration.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Migration of SCCM 2012 SP1 to SCCM 2012 R2 in a new domain.

I am wondering if it is possible to migrate objects from a SCCM 2012 SP1 server in one domain to a new SCCM 2012 R2 server in another domain ?
I read this article, but it does not state this particular combination.
http://technet.microsoft.com/en-us/library/gg682006.aspx
Thx
Thomas

For Migrate from SCCM 2012 SP1 to SCCM 2012 R2 in same environment/Domain, it's support and applicable.
But migrate to new domain, it's not support. Also you can't migrate database for new domain or object. you will need to rebuild it.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated.

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I cannot install Itunes 10.5.3 properly on my W7 64bits...it works but then i can't synchronize my ipad..they ask me to install Itunes 64bits...

...it works but then i can't synchronize my ipad..they ask me to install Itunes 64bits...
I uninstal, instal, uninstal all apple software, instal itunes again...after 10 times, it still doesnt work...
any advices ?

It won't pass 10.3.
What does this mean?
I figured it out. Thanks!!!
What did you figure out? How about posting how you resolved it?

My ipod touch 4 won't sync or register on my computer. The cord works, the usb port works, and when I plug my ipod into the wall to charge it work, but when i plug it to the computer nothing, not even charging. P.S. worked before I updated it.

The cord works, theusb port works, and when I plug my ipod into the wall charger it works, but when I plug it into the computer, nothing, not even charging. P.S. it worked before I updated it to iOS 6.1.5

You do have iTunes 10.7 or later on the computer, right?
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem?

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem? I starting to regret that I switched to iPhone...

Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

TS1368 when i try to access the itunes store to buy music, it loads at the top and says connecting to itunes store..then it loads all the way and goes to a blank page. it loads and seems like it is will work, but then goes to a blank page. Why is it doing

when i try to access the itunes store to buy music, it loads at the top and says connecting to itunes store..then it loads all the way and goes to a blank page. it loads and seems like it is will work, but then goes to a blank page. Why is it doing this?

Hello katyhale,
I found a couple of articles that might help with the issue you are experiencing with the iTunes Store.
If you are getting a white screen when accessing the iTunes Store and using a Windows computer, I recommend reviewing this article:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
If you are still not able to access the store, I recommend the following article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT1555 i just got a new apple tv but for some reason the remote only worked for about a min. and than it wount work at all. i tried to pair and unpair but nathing works but when i press a button the light on the apple tv turns off. what should i do?

i just got a new apple tv but for some reason the remote only worked for about a min. and than it wount work at all. i tried to pair and unpair but nathing works but when i press a button the light on the apple tv turns off. what should i do?

Have you held the menu and left arrow together for 6 secs ? (I think you have from what you say).
Also try unpowering and restarting AppleTV.
AC

In Numbers, I copied a worksheet and deleted the contents. The sheet I copied from has a header, I can't see it or bring it up when I'm working but it appears when I print the sheet. How do I delete it?

In Numbers, I copied a worksheet and deleted the contents. The sheet I copied has a header. I can't see it or bring it up when I'm working but it appears when I print the sheet. How do I delete the header?

Hi Cristina,
Headers are not shown in normal view.
Menu > File > Print to open Print View.
Hover the cursor over the Header to see the outline. Click and delete.
Regards,
Ian.

The old version of Sync will continue to work, but then it says "for a limited time"??

I have read all the info on the new sync, but it is not clear to me when it says:
"While the old version of Sync will continue to work, the latest version of Firefox doesn't support adding new devices to the old version of Sync. This means that you won't be able to sync with a new device.
to allow for migration to Firefox Accounts."
the old version of Sync will continue to work,
but
Mozilla will continue to host the old version of Sync for a limited time...?
This is confusing.
Does i mean that
the old version of Sync will continue to work for a limited time only?
or rather,
that it will work indefinitely, but only for your devices already paired/synced?

The new version of Sync will work in a limited capacity for a short time. You can use it as is, but you can't add new devices. You should upgrade to the new sync ASAP (it's more reliable and robust).
[[How to update to the new Firefox Sync]]

Hello. I have an ipod touch 4th generation. I have been trying to work facetime and imessage for 3 days, i sign in with my user ID and it says signing in and verifying but then it goes back to the sign in page. Can anyone help?

Hello. I have an ipod touch 4th generation. I have been trying to work facetime and imessage for 3 days, i sign in with my user ID and it says signing in and verifying but then it goes back to the sign in page. Can anyone help?

I disabled all my computer's firewalls and sure enough, IT WORKED!! My iPod is updated and just now finishing restoring! Thank you SOOOO SOOO much. : D

When I hover over the Bookmark Icon for a few seconds it won't work but when I go straight to the icon and click on it, it will work. Running windows 7

When I hover over the Bookmark Icon for a few seconds it won’t work but when I go straight to the icon and click on it, it will work. Running Windows 7.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help!

G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already, nothing ,.. Ppc g4 Mac

Should I check the memory cards themselves? Reseat them?
Yes.
Memtest X or Rember to test the RAM.
Reseat is also good.
The iPhone 4 doesn't like USB 1.1 much.
after the update the computer was working well, except for this freeze when ever I connect iPhone.
I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
Never an issue.
Can't say the same for USB 1.1.......
The above (previous post) linked PCI card is cheap enough.
Want cheaper, try this:
http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
OS X has native NEC chipset USB support.

SCCM 2012: push client sccm 2007 client worked but then no deployment is reaching the client

Similar Messages

Maybe you are looking for