SCCM 2012: PXE deploy: import boot images?

Hi,
We fully configured sccm 2012 and did osd via bootable media. Now we want to configure PXE.
We enabled it (http://prajwaldesai.com/deploying-sccm-2012-part-14-build-and-capture-windows-7-64-bit/).
My questions:
*Is that all that needs to be done?
*It seems to me we need to import boot images in WDS?
*If we do, which to import then (both x86 and x64 probably) + there is a winpe and a winpe.....wim made by sccm, which one to import then?
*on DHCP we change the boot server hostname but what about the bootfile name, what is the path of that? \boot\x64\wdsnbp.com?
Please advise.
J.
Jan Hoedt

I keep on getting TFTP open timeout
I find in smspxe.log that it reaches to the SCCM-server but then something goes wrong. Not sure what.
How can I troubleshoot find more info, please advise?
00:51:55:2A:5C:C5, 0A190A42-FFDe6-5e69-9e41-70e481B852E3: device is not in the database.    SMSPXE    21/03/2014 16:10:08    2720 (0x0AA0)
Getting boot action for unknown machine: item key: 2046820352    SMSPXE    21/03/2014 16:10:08    2720 (0x0AA0)
CLibSMSMessageWinHttpTransport::Send: URL: oursccmserver.prod.ourcompany.be:80  GET /SMS_MP/.sms_aut?MPKEYINFORMATIONEX    SMSPXE    21/03/2014 16:10:08    2720 (0x0AA0)
CLibSMSMessageWinHttpTransport::Send: URL: oursccmserver.prod.ourcompany.be:80  CCM_POST /ccm_system/request    SMSPXE    21/03/2014 16:10:08    2720 (0x0AA0)
Jan Hoedt
Note: what I also can see:
 Client IP Address: 000.000.000.000
 Your IP Address: 000.000.000.000
 Server IP Address: 000.000.000.000
 Relay Agent IP Address: 000.000.000.000

Similar Messages

  • SCCM 2012 Matching Processor Architecture Boot Image (0) not found

    SCCM2012 SP1 ,One Site, 3DP.
    one DP can not install os with PXE boot. when start PXE F12, system crush with code 0x00000f. and Log like this
    "00:0C:29:90:D1:C0, 291241B9-AB25-4400-B746-99E018F70F1A: device is in the database. SMSPXE 2014/10/1 2:28:11 4504 (0x1198)
    Warning: Matching Processor Architecture Boot Image (0) not found SMSPXE 2014/10/1 2:28:11 4504 (0x1198)"
    The BOOT.wim file works well in ither DP.
    I have try to redeploment the PXE and reload the Boot.Wim file in this DP, but can not reslove this problem.
    I'm afried reset the Boot.wim will take other 2 DP can not work too.
    Please Help.

    Hi Pazza,
    As Torsten said,  please ensure that you have an x86 and x64 boot image configured and deployed, regardless of the architecture of the OS that
    you wish to deploy. Secondly, ensure that the boot images for both architectures have the network drivers for the respective model that you are imaging injected.
    Otherwise, please review the link below:
    ConfigMgr PXE Boot Warning: Matching Processor Architecture Boot Image (0) not found
    http://www.systemcentercentral.com/configmgr-pxe-boot-warning-matching-processor-architecture-boot-image-0-not-found/
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SCCM 2012 pxe boot issue

    My test machines cannot PXE boot.
    My lab environment is very simple:
    10.10.0.0/24 subnet
    10.10.0.5 = Server2012, DHCP, DNS, SQL Server 2008 R2 Sp2
    10.10.0.7 = Server2012, SCCM2012
    All machines are Oracle VM Box virtual machines connecting through the same virtual network.
    Setup the PXE service from DP properties.  I let SCCM install WDS.  WDS in Server
    Manager does not have a server node, but the WDS service is running.  DP PXE tab is configured as follows:
    "Enable PXE support for clients" is checked
    "Allow this distribution point to respond to incoming PXE requests" is checked
    "Enable unknown computer support" is checked
    "Require a password when computers use PXE" is not checked
    "User device affinity" is set to "Allow user device affinity with automatic approval"
    PXE is configured to respond on all network interfaces
    The PXE server response delay is 0 seconds
    The DHCP server has options configured as follows:
    Option 66: 10.10.0.7
    Option 67: smsboot\x86\wdsnbp.com
    Both DP and MP on SCCM server are configured for HTTP.
    Both x86 and x64 boot images have been distributed to DP.  The media was updated after
    PXE was enabled on the DP.
    Both x86 and x64 boot images have "Deploy this image from the PXE service point" enabled on the Data Source tab of their properties
    SMSPXE.Log
    <![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777219" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction
    LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>
    ]LOG]!><time="15:05:09.346-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592" file="libsmsmessaging.cpp:6544">
    <![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: no advertisements found]LOG]!><time="15:05:09.346-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592"
    file="database.cpp:483">
    <![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: No boot action. Aborted.]LOG]!><time="15:05:09.441-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592"
    file="database.cpp:483">
    <![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: Not serviced.]LOG]!><time="15:05:09.441-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592" file="database.cpp:483">
    <![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777219" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction
    LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>
    ]LOG]!><time="15:05:09.705-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592" file="libsmsmessaging.cpp:6544">
    <![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: no advertisements found]LOG]!><time="15:05:09.705-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592"
    file="database.cpp:483">

    Resource ID is already present in the Unknown Computer (Windows 7) Properties please look into it and
    OSD Task Sequences is there :(.

  • Operating System on x64 can be deployed with boot image x86

    Hi,
    I want to know if there is any limitation to deploy Operating System and Wim image on x64 (64 bit) using a boot image x86 (32 bits)
    Thanks

    Hi, 
    That is what I'm trying to accomplish because during the years with SCCM 2007 we were available to deploy x64 OS
    (windows 7, 8, 8.1) using x86 boot image without any problem. Since we migrated to SCCM 2012 R2 CU 2 we have experimenting different and
    intermittent issues:
    we are using x86 boot image to deploy x64 OS and
    x64 drivers package. When the system reboot to start the setup, we get a black screen with a movable cursor (but nothing to click on!).
    when I change the task sequence to use x64 boot image (note: using the same x64 OS and same drivers package) the process continue with success.
    I'm searching any technical documentation from Microsoft to better understand this issue. What can be the reason why it work fine with x64 boot image and not with x86.

  • SCCM 2012 PXE issues with Acer Machines?

    Hi,
    I am having a strange issue with PXE trying to build a machine with a Windows 7 Task Sequence.
    Ok here is the synario - I have 2 machines that do not get any offers from PXE - so I get that error No DHCP
    or proxy DHCP offers were received. However if I make a bootable USB key and boot the *same* machines my
    task sequence appears on the menu that I can select. (The task sequence is deployed to PXE and Media BTW).
    Now it gets strange - if I take other machines and put the on the same network cable and F12 them PXE works
    and I get the task sequence presented. So same PXE server - same DHCP server.
    So from my logic I figure if I had a policy type problem then it would not present the task sequence when
    I try the boot usb.
    Both the machines I am having issues with are ACER btw if people know of any know issues. I am starting
    to suspect I have faulty hardware etc. One machine is a Acer Travelmate P633-V Laptop and the other machine is
    Acer Veriton VS6620G desktop.
    Any suggestions on how to resolve this - it seem very strange.
    My environment is SCCM 2012 SP1 btw.
    Is there something I am missing here :)
    Thanks,
    Ward.

    Hi,
    Thanks for all the sugestions. I can confirm that the machines
    when an OS is on them do register the IP addresses with the DHCP/WDS server (same box). Also I can confirm the Unknown computer support is turned on the box in SCCM 2012 on the DP.
    Ok but I did get one working which I can't explain why it works
    the way it does.
    On the notebook if I enable secure boot (UEFI) and boot with PXE
    it works :) It appears the stupid BIOS turns this on but disables
    another setting called "Network Boot" which is crazy. So if
    you turn both on Secure boot enabled and "Network Boot" is on it works.
    Now here is the puzzle that still stumps me - switch this back to
    legacy mode and no go - no PXE. Boot other non UEFI machines and
    they PXE boot.
    The WDS/DHCP/SCCM DP server is Windows 2008 (all on one box) as I understand it does not support UEFI PXE - this is in Windows 2012. I don't think there is an option in SCCM 2012 for it.
    So can somebody offer me a technical explination?
    Is there something else I am missing?
    I still am trying to work out how to get the desktop to UEFI PXE boot if this is possible.
    Thanks,
    Ward

  • SCVMM and SCCM 2012 R2 - Deploying VM's - Which method

    Hi guys,
    Looking at deploying SCCM 2012 R2 and SCVMM 2012 R2. I've used SCCM 2012 quite a lot in a previous environment, but not SCVMM.
    I'm aware SCVMM is for bare-metal Hyper-V (as well as Xen and ESXi), and for managing the virtual environment, but do I create VM templates and create my VM Servers within SCVMM, or just the shell and PXE boot into a SCCM Task Sequence to deploy the OS?
    Will also be running Orchestrator too.... So to deploy a VM would a runbook be used to create a VM shell in SCVMM, and then kick off a TS in SCCM?
    Or should I be building the server templates and basically replicating some of SCCM's OSD capability for VM servers in SCVMM?
    Thanks - Steve

    Thx Stevehoot.
    Yes, you might see that there are some "overlapping" technologies involved, but please remember that SCCM is the general approach, that has been supporting physical servers/computers since day one. This requires PXE boot for the VMs as well, in order to
    deploy the OS, install the agent and then the applications.
    Using VMM for VM deployment, the VMM agent will handle this all for you and you can manage your datacenter from this single console. Currently, Gen2 has lacking support in some areas, like service templates in VMM, VM roles in Azure Pack and replication
    to Azure using Microsoft Azure Site Recovery. 
    Moving forward, it would be smart if you could invest in deployment using VMM if the majority of your workloads will be on virtual machines. What we basically sees in the field is that people are using SCCM to deploy their traditional applications onto these
    servers where service templates may not be the right solution. But again, then SCCM is something that kicks in post the VM deployment. 
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • SCCM 2012 PXE setup error PXE-E7B - Missing MTFTP Server IP Address

    Have just configured PXE on our new SCCM 2012 server.  Seems like it should be simple to setup.  66/67 options are setup as is IPhelper.
    When PXE booting a client it hangs at the DHCP prompt and then throws the following error:
    PXE-E7B - Missing MTFTP Server IP Address
    Any ideas what the problem might be?
    Thanks

    PXE is enabled on DP and WDS service running fine.  There are both 32 and 64 PXE enabled boot images uploaded on DP. When trying to PXE boot a VM on the same subnet as the SCCM 2012 server you see entries in the smspxe.log.  The PXE doesn't
    work because there's no DHCP scope available, but you can see PXE reacting and it throws a different error PXE-E52: No DHCP offers were received.  When you try PXE booting on a different subnet nothing appears in smspxe.log, as you say it's like it's
    not seeing the PXE traffic at all.
    Network guys have confirmed IP helper setup for old and new SCCM servers.  Discard, echo, and 4001 access allowed. 

  • SCCM 2012 - PXE error

    Hi Experts,
    I need some clarity on PXE boot
    1. My PXE point (Secondary Server) has IP subnet with 10.171.X.X and I am trying to build the machine from the next building which is 10.6.X.X series. When I PXE boot I get the below error
    PXE-E53 - No Boot Filename received
    PXE-MOF- Exiting Intel Boot Agent
    Do I need to enable IP helper on the switch level to PXE boot?
    2. WDS is configured to respond to all client computer and from boot image properties "Deploy from PXE enabled distribution point is enabled" Please help
    Regards, Pratap

    1. Yes. PXE as a protocol is limited to a broadcast/subnet boundary. Enabling IP helpers is the preferred way to direct the PXE broadcasts across subnets.
    2. I don't understand what the issue. Please provide more information, define your issue, and your expectations.
    Jason | http://blog.configmgrftw.com

  • Upgrade to SCCM R2 have to recreate boot image and TS

    Wanna ask, I have upgraded from my SCCM from SP1 CU3 to R2. But i noticed that in boot image, the WinPE tab is missing thus i cannot include the network driver. Anyway that i can make the tab reappear again? Net says have to recreate the boot image and TS...
    http://www.deploymentresearch.com/Research/tabid/62/EntryId/117/A-Geeks-Guide-for-upgrading-to-ConfigMgr-2012-R2-and-MDT-2013.aspx

    This often happens after R2 upgrade. If your boot image does not have 6.3.9600 version then you will not be able to manipulate it using the R2 console. You don't need MDT to create a new one though (this new version).
    You can use dism. See here. It's very easy. I had to do it yesterday.
    http://www.niallbrady.com/2013/10/09/how-can-i-manually-add-winpe-5-boot-images-to-system-center-2012-configuration-manager-sp1-cu3/
    http://myitforum.com/myitforumwp/2013/08/01/how-to-create-configmgr-2012-boot-images-from-scratch/
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • SCCM 2012 R2 Deployment assistance and guide lines required.

    Hi All,
    We have purchased the system center suit and planed to deploy the below products in our environment.
    SCOM - Plan already made and architecture is ready with no issues
    SCCM - In planning state.
    We are planning to use the same SQL server for both SCOM and SCCM, Which is a SQL Server 2008 R2 SP1 CU6. So the database engine service is available to host our database.
    But the Business has said we need to deploy reporting on another machine which may be a SQL 2012 SP1.
    What i want to know is does SCCM 2012 R2 support using different versions of SQL server for its features? As i see there is no documentation for this.
    How ever MS has given the document for SCOM that it is not supported and we need to use the same version of SQL for all the features.
    Also is SQL Express edition supported for other Primary sites if i use a licensed SQL in my CAS ? 
    Does any one have an idea on SCCM 2012 R2 for the above ?
    Gautam.75801

    Thank you very Grath. 
    Also my last and the remaining question is about the SQL Server version inter operability.
    Does using different versions of SQL work in SCCM ? i.E I use DB Engine SQL 2008 R2 SP1 CU6 and if i use SQL 2012 R2 for reporting. 
    Will this work in SCCM ? As for SCOM MS has said this in there document that using different versions of SQL's for features is not supported.
    So what is the case with SCCM is it the same or is it supported ?
    As the Microsoft documents do not talk about this question.
    The reason i asked is as the business does not have cost for Hardware for a SQL server and they are asking to use a SQL server in another domain for DB engine.
    And another SQL server for reporting as the DB engine server does not have reporting.
    Gautam.75801

  • SCCM 2012 - App deploy - Configuring a dependency in an app which is also configured for supersedence.

    Hi there
    I am replacing an app with a newer version via SCCM 2012.
    So lets call the existing app App1 and the new app App2.
    I have an application created which has App1 configured to be superseded (uninstall) and App2 to be installed as a msi deployment type.
    The issue I have ran into is that the install/upgrade fails if App1 is currently opened and running. The uninstall only works if App1 is not opened.
    Anyone had to deal with something like this before without reverting to a script deployment type which runs taskkill commands and then a msiexec /x command? Is there a more sophisticated way to do this using the new application model?
    The sequence would need to be:
    1) App1 if running on the target machine is killed
    2) App1 is uninstalled
    3) App2 is installed
    Anyone put anything like that together?
    Regards
    John

    Thank you for replying.
    Yes the key is indeed the uninstallation command and behaviour on App1; as my question makes clear I am aware of that.
    I am hoping someone has come up with a clever way of achieving such a requirement, or I will simply have to use a script, which seems a bit unsophisticated given the range of options available in the application model.
    Regards
    John

  • SCCM 2012: Application deployment stuck on 'Waiting to install '

    I am setting up many new machines in the last month. But sometimes, when installing applications after rolling out an image. The applications wont install and display the waiting to install message. This mostly last for 1-2 hours but sometimes ever longer.
    None of the logs that I have checked seem to give any indication why it will not move forward.  Any
    thoughts on how to troubleshoot?
    For what it's worth, we are setup with a standalone primary site with one distribution point installed. SCCM 2012 SP1.
    Thanks in advance.

    I see many error messages concerning BITS. This is a part of the DataTransferService.logDTSJob {183F4DC8-B329-4648-B351-D72BE3759642} in state 'DownloadingData'. DataTransferService 22/08/2014 15:26:24 7428 (0x1D04)
    CDTSJob::HandleErrors: DTS Job '{183F4DC8-B329-4648-B351-D72BE3759642}' BITS Job '{FC9A9789-B3B1-4804-A59F-22E08B6D6F3A}' under user 'S-1-5-18' OldErrorCount 0 NewErrorCount 1 ErrorCode 0x80190194 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
    CDTSJob::HandleErrors: DTS Job ID='{183F4DC8-B329-4648-B351-D72BE3759642}' URL='http://SITE SERVER:80/SMS_MP' ProtType=1 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
    CDTSJob::JobError: DTS Job ID='{183F4DC8-B329-4648-B351-D72BE3759642}' BITS Job ID='{FC9A9789-B3B1-4804-A59F-22E08B6D6F3A}' ErrorCode=0x80190194 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
    CDTSJob::JobError: DTS Job ID='{183F4DC8-B329-4648-B351-D72BE3759642}' URL='http://SITE SERVER:80/SMS_MP' ProtType=1 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
    DTS job {183F4DC8-B329-4648-B351-D72BE3759642} BITS job {FC9A9789-B3B1-4804-A59F-22E08B6D6F3A} failed to download source file http://SITE SERVER:80/SMS_MP/.sms_pol?%7BC2FB5733-0FDF-4907-8617-29B1DC078E83%7D/15.1_00 to destination C:\Windows\CCM\Temp\{F001BFC6-8830-46F3-96B8-9CC08B1A4539}.tmp with error 0x80190194 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
    DTS job {183F4DC8-B329-4648-B351-D72BE3759642} BITS job {FC9A9789-B3B1-4804-A59F-22E08B6D6F3A} partially completed 0/1 with error 0x80190194 context 5 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
    DTSJob {183F4DC8-B329-4648-B351-D72BE3759642} in state 'Error'. DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
    DTSJob {183F4DC8-B329-4648-B351-D72BE3759642} in state 'NotifiedComplete'. DataTransferService 22/08/2014 15:26:24 7428 (0x1D04)
    DTS job {183F4DC8-B329-4648-B351-D72BE3759642} has completed:
    Status : ERROR (0x80070002),
    Start time : 08/22/2014 15:26:24,
    Completion time : 08/22/2014 15:26:24,
    Elapsed time : 0 seconds DataTransferService 22/08/2014 15:26:24 7428 (0x1D04)

  • SCCM 2012 - App Deployment

    Hi
    I have the following software apps that need to be pushed out to a large number of clients on our network.
    Firefox
    Google Chrome
    Flash Player 16
    Java (jre-8u25)
    I have the .exe files for each. Does anyone know of a step-by-step guide I could use to deploy the apps?
    Thanks
    Ivan

    Here are some step-by-step guides:
    https://sccmentor.wordpress.com/2013/06/12/deploying-exe-files-via-sccm-2012/
    http://gerryhampsoncm.blogspot.nl/2013/03/sccm-2012-sp1-step-by-step-guide-part_20.html
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Sccm 2012 simulate deployment for task sequence / OS or applications

    Hi
    I have been getting a lot of problems with Os/Application Task Sequences and have been asked a few questions.
    I cannot find anything on the Web about Limitations for a simulated deployment in SCCM 2012.
    I know SCCM allows you to create them but does it work/Are the results accurate?
    I need to know the following: 
    Can you simulate an OS Deployment Task Sequence?
    Can you simulate an Application Deployment Task Sequence?
    Are there limitations to Simulated Deployments?
    Thanks guys Hope this makes sense and you can help.
    Regards
    Anthony

    If you have the MDT integration with SCCM 2012 you can simulate the settings used by the task sequence, but not the actual task sequence deployment. However, seeing the settings is often enough.
    Check this post:
    Save time (and avoid pain) - Create a MDT simulation environment
    http://www.deploymentresearch.com/Research/tabid/62/EntryId/155/Save-time-and-avoid-pain-Create-a-MDT-simulation-environment.aspx
    / Johan
    Regards / Johan Arwidmark Twitter: @jarwidmark Blog: http://www.deploymentresearch.com FB: www.facebook.com/deploymentresearch

  • Sccm 2012 application deployment fail

    Hi Gents
    I am attempting to deploy applications to a test machine.  The software deployment reaches the test machine in the software center but it fails.
    One Application had the status "Past due - will be installed"
    The rest just state "Fail" with more information saying:
    "The software change returned error code 0x80070005 (-2147024891)
    I've been googling away here and iwll continue to do so until i find a resolution but hopefully you guys can help point me in the right direction.
    Thanks for the help guys
    Lee

    Ok i got it to a point where the status of the applications is "waiting to install" so they download fine but not actually installing.  I followed this link:
    http://777notes.wordpress.com/2012/08/17/sccm-2012-local-content-cach-failed-for-workgroup-machine/ anbd enabled the anonymous checkbox.  But still the apps arent installing.

Maybe you are looking for