SCCM 2012 - PXE error

Hi Experts,
I need some clarity on PXE boot
1. My PXE point (Secondary Server) has IP subnet with 10.171.X.X and I am trying to build the machine from the next building which is 10.6.X.X series. When I PXE boot I get the below error
PXE-E53 - No Boot Filename received
PXE-MOF- Exiting Intel Boot Agent
Do I need to enable IP helper on the switch level to PXE boot?
2. WDS is configured to respond to all client computer and from boot image properties "Deploy from PXE enabled distribution point is enabled" Please help
Regards, Pratap

1. Yes. PXE as a protocol is limited to a broadcast/subnet boundary. Enabling IP helpers is the preferred way to direct the PXE broadcasts across subnets.
2. I don't understand what the issue. Please provide more information, define your issue, and your expectations.
Jason | http://blog.configmgrftw.com

Similar Messages

SCCM 2012 PXE setup error PXE-E7B - Missing MTFTP Server IP Address

Have just configured PXE on our new SCCM 2012 server. Seems like it should be simple to setup. 66/67 options are setup as is IPhelper.
When PXE booting a client it hangs at the DHCP prompt and then throws the following error:
PXE-E7B - Missing MTFTP Server IP Address
Any ideas what the problem might be?
Thanks

PXE is enabled on DP and WDS service running fine. There are both 32 and 64 PXE enabled boot images uploaded on DP. When trying to PXE boot a VM on the same subnet as the SCCM 2012 server you see entries in the smspxe.log. The PXE doesn't
work because there's no DHCP scope available, but you can see PXE reacting and it throws a different error PXE-E52: No DHCP offers were received. When you try PXE booting on a different subnet nothing appears in smspxe.log, as you say it's like it's
not seeing the PXE traffic at all.
Network guys have confirmed IP helper setup for old and new SCCM servers. Discard, echo, and 4001 access allowed.

SCCM 2012 PXE issues with Acer Machines?

Hi,
I am having a strange issue with PXE trying to build a machine with a Windows 7 Task Sequence.
Ok here is the synario - I have 2 machines that do not get any offers from PXE - so I get that error No DHCP
or proxy DHCP offers were received. However if I make a bootable USB key and boot the *same* machines my
task sequence appears on the menu that I can select. (The task sequence is deployed to PXE and Media BTW).
Now it gets strange - if I take other machines and put the on the same network cable and F12 them PXE works
and I get the task sequence presented. So same PXE server - same DHCP server.
So from my logic I figure if I had a policy type problem then it would not present the task sequence when
I try the boot usb.
Both the machines I am having issues with are ACER btw if people know of any know issues. I am starting
to suspect I have faulty hardware etc. One machine is a Acer Travelmate P633-V Laptop and the other machine is
Acer Veriton VS6620G desktop.
Any suggestions on how to resolve this - it seem very strange.
My environment is SCCM 2012 SP1 btw.
Is there something I am missing here :)
Thanks,
Ward.

Hi,
Thanks for all the sugestions. I can confirm that the machines
when an OS is on them do register the IP addresses with the DHCP/WDS server (same box). Also I can confirm the Unknown computer support is turned on the box in SCCM 2012 on the DP.
Ok but I did get one working which I can't explain why it works
the way it does.
On the notebook if I enable secure boot (UEFI) and boot with PXE
it works :) It appears the stupid BIOS turns this on but disables
another setting called "Network Boot" which is crazy. So if
you turn both on Secure boot enabled and "Network Boot" is on it works.
Now here is the puzzle that still stumps me - switch this back to
legacy mode and no go - no PXE. Boot other non UEFI machines and
they PXE boot.
The WDS/DHCP/SCCM DP server is Windows 2008 (all on one box) as I understand it does not support UEFI PXE - this is in Windows 2012. I don't think there is an option in SCCM 2012 for it.
So can somebody offer me a technical explination?
Is there something else I am missing?
I still am trying to work out how to get the desktop to UEFI PXE boot if this is possible.
Thanks,
Ward

SCCM 2012 SP1 errors when downloading updates

Currently using SCCM 2012 SP1 with CU2 and I am having some update download issue with Automatic Deployment Rules.
The Environment is:
Server 2008 R2
SCCM 2012 SP1 CU2 (Upgraded from SCCM 2012 CU2)
I created an Automatic Deployment Rule for Adobe Flash. Since I was having the same issue with Adobe Reader, when I published via SCUP to WSUS I chose not to sign the updates.
After publishing to WSUS I then sync SCCM, I see the updates and then in the ADR I had it download the updates and I see this error:
Authentication of file C:\Windows\TEMP\CABDEC5.tmp failed, error 0x800b0004 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 3712 (0x0E80)
ERROR: DownloadContentFiles() failed with hr=0x80073633 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download the update from internet. Error = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download ContentID 16845337 for UpdateID 16841530. Error code = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Now the funny thing is if I go to the update itself within update group that Flash is a member I can right click it and choose download and the error doesn't occur.
I observed that the UNC path for ADR Adobe flash, when the rule is ran, is populated with folders that have a name something like 44738297895427890.1 or 423154325378u867234789.1. I have come to realize that those are failed downloads. So for the
heck of it I then right clicked the update itself and chose download and it downloaded without issue. Now I'm guessing that when I chose to download directly from the update maybe the system is getting the update from adobe and not from wherever the rule was
trying to get it from. I then see the .1 removed from the directory name and there are updates within them.
Just for clarity here are the steps I go through from SCUP to Syncing...
Log in to WSUS server
Run SCUP as administrator
Get notified there are updates from Adobe and let SCUP download updates
Find the updates the specify the following publishing options
Full Content
Sign all software updates with a new publishing certificate .... (Is this necessary by the way?)
Then click Next
After that's done I then go to SCCM Manager Console and go to Software Updates and right click to Synchronize them.
After that's done then I run the ADR for Adobe Flash and when it goes to download the updates that's when the error occurs.
What am I missing?
Also, while I wait for help I just recently added the WSUS SCUP certificate to the SCCM server to see if by chance that fixes stuff. If it does then I'll post the results of adding the certificate to the SCCM server.
One other thing, is there a way to delete updates? When I was having this issue in the past, I went in to SCUP I marked the updates as expired and then deleted the updates. Went to SCCM and synchronized the updates and they went from not expired to expired
then I waited, maybe 30 days or so before I could add the updates back in.
Thanks for the help!

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Have you seen the note at the bottom of this page about this error?
http://technet.microsoft.com/en-us/library/bb932193.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 An error has occurred during report processing (rsProcessingAborted)

I have this error on some reports i try to run in my customer
i rebuild all the Database and add the security rule for the report database
i gave the user Logon locally rights ,(and run as a services) also run as sysadmin
here is the error
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
here is a log srsrp.log:
System.Web.Services.Protocols.SoapException: The policy for '#######\IT Department' user or group is not valid. The role assignment is either empty, specifies a user or group name that is already used in an existing role assignment for the current item,
or specifies duplicate roles for the same user or group. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidPolicyDefinitionException: The policy for '#######\IT Department' user or group is not valid. The role assignment is either empty, specifies
a user or group name that is already used in an existing role assignment for the current item, or specifies duplicate roles for the same user or group.~   at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetPolicies(String Item,
Policy[] Policies)~   at Microsoft.ReportingServices.WebServer.ReportingService2005.SetPolicies(String Item, Policy[] Policies)

ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted)

Sccm 2012 r2 error setup cannot compile mof file tasksequenceprovider.mof

Am getting this error during SCCM 2012 R2 installation on the same server which has SQL 2012 with SP1. "setup cannot compile mof file tasksequenceprovider.mof". Any help?

Hi,
The following blog introduced a tool scans winodws module which may help find out the missing file.
http://blogs.technet.com/b/configurationmgr/archive/2010/01/05/the-configuration-manager-service-pack-install-guide.aspx

MBAM - SCCM 2012 Reports - Error: the 'MBAM Policy' view does not exist

Hi
I have installed MBAM with SCCM 2012 integration. A single server install with SQL server 2012. Mostly it has gone smoothly and laptops are being encrypted and pins stored and recoverable. The problem I have is reports are not showing. I get the following
error message.
"Error: the 'MBAM Policy' view does not exist"
Any ideas why this is? I get the same error message with all 4 reports.

Hi Slycy,
There is another thread that seems to be a similar issue
here that may help you. The last post in particular has a number of steps that you can use to speed up creation of the views:
Just for future reference, there are quite a few things that have to happen before the view is created. This is merely how CM works.
Make MBAM MOF changes
Select TPM spec version in hardware inventory
Install MBAM CM Integration feature
Perform a machine policy refresh cycle on a client to get the MOF changes that need to be inventoried
Perform hardware inventory
Update MBAM Supported Computers collection membership. The machine should appear if it meets the criteria
Run another machine policy refresh on the client so that the Configuration Baseline will come down
Make sure that the MBAM agent has woken up once
Evaluate the Configuration Baseline
The MBAM views should be created now.
You don't have to do this for every machine, but this is the process to speed it up. If you let CM do it, it could take over a week before the view is created the first time, depending on when Hardware inventory runs, etc.
Hope this helps,
David

SCCM 2012 Client Error Failed to create registration request body. Error: 0x80070057

Hi,
While installing sccm 2012 R2 Client on server 2008 R2 ClientManagerStartup.log shows below error
Failed to create registration request body. Error: 0x80070057
Kiran

Torsten is right, please post the entire ccmsetup.log and client.msi.log.
Daniel Ratliff | http://www.PotentEngineer.com

SCCM 2012 install error. Error = 1722

I am trying to install SCCM 2012 and i got theese errors:
ERROR: Failed to get the buffer size for LookupAccountName. Error = 1722
and
ERROR: Failed to get SID for user (NT Service\MSSQLSERVER)
and the install wizard says "Failed to create SQL server certificate."

Please do not doublepost - I just spend some time answering the same question in the General forum -
http://www.configurationmanager2012.com/Configuration-Manager-02.html
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund

SCCM 2012: PXE deploy: import boot images?

Hi,
We fully configured sccm 2012 and did osd via bootable media. Now we want to configure PXE.
We enabled it (http://prajwaldesai.com/deploying-sccm-2012-part-14-build-and-capture-windows-7-64-bit/).
My questions:
*Is that all that needs to be done?
*It seems to me we need to import boot images in WDS?
*If we do, which to import then (both x86 and x64 probably) + there is a winpe and a winpe.....wim made by sccm, which one to import then?
*on DHCP we change the boot server hostname but what about the bootfile name, what is the path of that? \boot\x64\wdsnbp.com?
Please advise.
J.
Jan Hoedt

I keep on getting TFTP open timeout
I find in smspxe.log that it reaches to the SCCM-server but then something goes wrong. Not sure what.
How can I troubleshoot find more info, please advise?
00:51:55:2A:5C:C5, 0A190A42-FFDe6-5e69-9e41-70e481B852E3: device is not in the database.   SMSPXE   21/03/2014 16:10:08   2720 (0x0AA0)
Getting boot action for unknown machine: item key: 2046820352   SMSPXE   21/03/2014 16:10:08   2720 (0x0AA0)
CLibSMSMessageWinHttpTransport::Send: URL: oursccmserver.prod.ourcompany.be:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONEX   SMSPXE   21/03/2014 16:10:08   2720 (0x0AA0)
CLibSMSMessageWinHttpTransport::Send: URL: oursccmserver.prod.ourcompany.be:80 CCM_POST /ccm_system/request   SMSPXE   21/03/2014 16:10:08   2720 (0x0AA0)
Jan Hoedt
Note: what I also can see:
Client IP Address: 000.000.000.000
Your IP Address: 000.000.000.000
Server IP Address: 000.000.000.000
Relay Agent IP Address: 000.000.000.000

SCCM 2012 Setup error when setting SQL connection info "Network Path Was Not Found"

Hello.
I'm facing an issue during CCM 2012 SP1 Beta Setup on step "DB INFORMATION"
My lab is set like that:
1x Front-end WS 2012 rtm "CCM Install on it" (Fresh install = no features installed)
1x Back-end WS 2012 rtm SQL Server 2012 SP1 (I don't know if this is supported).
On the sql Side there is already a first instance with SCVMM 2012 SP1(beta) environment that work well.
A second dedicated instance is ready for CCM install.
Named Pipes enabled , TCP/IP Enabled
Firewall rules for 1433 and 4022 are enabled on the Domain profile ,other profiles are disabled.
Instance Service is running with a domain account
Everything is published in AD (delegations for computer account), Schema Prep already done manually.
I'm Able to resolve dns name of the SQL server on the CCM VM and telnet 4022 + 1433 ports.
For the finish here is the end of Setup Wizard logs:
Exception rethrown at [0]:
   à System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
   à System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
   à Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
   à Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
   à Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
   à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
   à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
   à System.Windows.Controls.Button.OnClick()
   à System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
   à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
   à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
   à System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
   à System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
   à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
   à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
   à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
   à System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
   à System.Windows.Input.InputManager.ProcessStagingArea()
   à System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
   à System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
   à System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
   à System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
   à System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
   à MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
   à MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
   à System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
   à System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
14/12/2012 08:21:06: ConfigMgrSetupWizard Information: 1 : Creating SQL connection to database SCCM\master on server SQL001.IT-DEPLOYMENT.LAB.
14/12/2012 08:21:53: ConfigMgrSetupWizard Error: 1 : Exception message: [Le chemin réseau n’a pas été trouvé.
], Exception details: [System.IO.IOException: Le chemin réseau n’a pas été trouvé.
Server stack trace:
   à Microsoft.Win32.RegistryKey.Win32ErrorStatic(Int32 errorCode, String str)
   à Microsoft.Win32.RegistryKey.OpenRemoteBaseKey(RegistryHive hKey, String machineName)
   à Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.GetSqlConnection(String databaseName, String serverName, Boolean encrypt)
   à Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.CheckSqlConnection(String serverName, String instanceName)
   à System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
   à System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
   à System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
   à System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
   à Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
   à Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
   à Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
   à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
   à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
   à System.Windows.Controls.Button.OnClick()
   à System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
   à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
   à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
   à System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
   à System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
   à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
   à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
   à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
   à System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
   à System.Windows.Input.InputManager.ProcessStagingArea()
   à System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
   à System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
   à System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
   à System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
   à System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
   à MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
   à MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
   à System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
   à System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
Please help me; I'm driving crazy.
Kévin KISOKA - MCTS Exchange Configuring, MCTS Hyper-V Server Virtualization

3 Steps are neccessary:
1. Make sure the Windows Firewall Service on the SQL Server is running and set to automatic
2. Add the SQL EXE as a Program Exception to the Firewall on the SQL Server:
To add a program exception to the firewall using the Windows Firewall item in Control Panel.
- On the Exceptions tab of the Windows Firewall item in Control Panel, click
Add a program.
- Browse to the location of the instance of SQL Server that you want to allow through the firewall, for example
C:\Program Files\Microsoft SQL Server\MSSQL11.<instance_name>\MSSQL\Binn, select
sqlservr.exe, and then click Open
- Click OK.
From http://technet.microsoft.com/en-us/library/cc646023.aspx
3. The last step neccessary, on the SQL Server, is to set File and Printer Sharing "on". When this is off, the following error occurs: "Network Path was not found"

SCCM 2012 pxe boot issue

My test machines cannot PXE boot.
My lab environment is very simple:
10.10.0.0/24 subnet
10.10.0.5 = Server2012, DHCP, DNS, SQL Server 2008 R2 Sp2
10.10.0.7 = Server2012, SCCM2012
All machines are Oracle VM Box virtual machines connecting through the same virtual network.
Setup the PXE service from DP properties. I let SCCM install WDS. WDS in Server
Manager does not have a server node, but the WDS service is running. DP PXE tab is configured as follows:
"Enable PXE support for clients" is checked
"Allow this distribution point to respond to incoming PXE requests" is checked
"Enable unknown computer support" is checked
"Require a password when computers use PXE" is not checked
"User device affinity" is set to "Allow user device affinity with automatic approval"
PXE is configured to respond on all network interfaces
The PXE server response delay is 0 seconds
The DHCP server has options configured as follows:
Option 66: 10.10.0.7
Option 67: smsboot\x86\wdsnbp.com
Both DP and MP on SCCM server are configured for HTTP.
Both x86 and x64 boot images have been distributed to DP. The media was updated after
PXE was enabled on the DP.
Both x86 and x64 boot images have "Deploy this image from the PXE service point" enabled on the Data Source tab of their properties
SMSPXE.Log
<![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777219" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>
]LOG]!><time="15:05:09.346-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592" file="libsmsmessaging.cpp:6544">
<![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: no advertisements found]LOG]!><time="15:05:09.346-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592"
file="database.cpp:483">
<![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: No boot action. Aborted.]LOG]!><time="15:05:09.441-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592"
file="database.cpp:483">
<![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: Not serviced.]LOG]!><time="15:05:09.441-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592" file="database.cpp:483">
<![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777219" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>
]LOG]!><time="15:05:09.705-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592" file="libsmsmessaging.cpp:6544">
<![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: no advertisements found]LOG]!><time="15:05:09.705-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592"
file="database.cpp:483">

Resource ID is already present in the Unknown Computer (Windows 7) Properties please look into it and
OSD Task Sequences is there :(.

Sccm 2012 SP1 - Error 0x80070002 / 0x80004005

Hello,
First off all sorry for my bad english speaking ! I'll try to be as clear as possible :)
I want to build an image from a basic win7 captured image (that part was already done) adding some apps in a first capture and next (if the first one wanted to work a day...) another capture to run all the updates.
Here a capture of the Build and capture task sequence :
So, the task failed at this step : "Capture the reference Machine".
I've think that it was due to the account used but when I make the "verify" test it is a success.
Here the log (server name replaced by xxxxxxxxxx) :
New/Changed ActualConfig policy instance(s) : 0   TSManager   16/04/2015 09:04:46   1852 (0x073C)
Unlocked ActualConfig successfully   TSManager   16/04/2015 09:04:46   1852 (0x073C)
Unlocked policy transaction lock successfully   TSManager   16/04/2015 09:04:46   1852 (0x073C)
Raising event:
instance of CCM_PolicyAgent_SettingsEvaluationComplete
   ClientID = "GUID:4808EED8-2CA2-4B4B-AAAD-C0154AD92DFD";
   DateTime = "20150416070446.089000+000";
   PolicyNamespace = "\\\\xxxxx\\root\\ccm\\policy\\machine\\actualconfig";
   ProcessID = 2932;
   ThreadID = 1852;
   TSManager   16/04/2015 09:04:46   1852 (0x073C)
Successfully submitted event to the Status Agent.   TSManager   16/04/2015 09:04:46   1852 (0x073C)
End TS policy evaluation   TSManager   16/04/2015 09:04:46   1852 (0x073C)
Policy evaluation initiated   TSManager   16/04/2015 09:04:46   1852 (0x073C)
g_TSManager.Run(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,725)   TSManager   16/04/2015 09:04:46   1852 (0x073C)
::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,261)   TSManager   16/04/2015 09:04:46   1852 (0x073C)
RegQueryValueExW failed for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram   TSManager   16/04/2015 09:04:46   1852 (0x073C)
GetTsRegValue() failed. 0x80070002.   TSManager   16/04/2015 09:04:46   1852 (0x073C)
End program:    TSManager   16/04/2015 09:04:46   1852 (0x073C)
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005   TSManager   16/04/2015 09:04:46   1852 (0x073C)
Sending error status message   TSManager   16/04/2015 09:04:46   1852 (0x073C)
MP server http://xxxxxxxxxxxxxxxx. Ports 80,443. CRL=false.   TSManager   16/04/2015 09:04:46   1852 (0x073C)
Setting authenticator   TSManager   16/04/2015 09:04:46   1852 (0x073C)
Set authenticator in transport   TSManager   16/04/2015 09:04:46   1852 (0x073C)
Sending StatusMessage   TSManager   16/04/2015 09:04:46   1852 (0x073C)
Setting message signatures.   TSManager   16/04/2015 09:04:46   1852 (0x073C)
Setting the authenticator.   TSManager   16/04/2015 09:04:46   1852 (0x073C)
CLibSMSMessageWinHttpTransport::Send: URL: xxxxxxxxxxxxxxxx:80 CCM_POST /ccm_system/request   TSManager   16/04/2015 09:04:46   1852 (0x073C)
Error. Received 0x80072ee7 from WinHttpSendRequest.   TSManager   16/04/2015 09:04:46   1852 (0x073C)
unknown host (gethostbyname failed)   TSManager   16/04/2015 09:04:46   1852 (0x073C)
hr, HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8936)   TSManager   16/04/2015 09:04:46   1852 (0x073C)
sending with winhttp failed; 80072ee7   TSManager   16/04/2015 09:04:46   1852 (0x073C)
Will retry in 5 second(s)   TSManager   16/04/2015 09:04:46   1852 (0x073C)
Retrying...   TSManager   16/04/2015 09:04:51   1852 (0x073C)
CLibSMSMessageWinHttpTransport::Send: URL: xxxxxxxxxxxxxxxx:80 CCM_POST /ccm_system/request   TSManager   16/04/2015 09:04:51   1852 (0x073C)
Error. Received 0x80072ee7 from WinHttpSendRequest.   TSManager   16/04/2015 09:04:51   1852 (0x073C)
unknown host (gethostbyname failed)   TSManager   16/04/2015 09:04:51   1852 (0x073C)
hr, HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8936)   TSManager   16/04/2015 09:04:51   1852 (0x073C)
sending with winhttp failed; 80072ee7   TSManager   16/04/2015 09:04:51   1852 (0x073C)
Will retry in 11 second(s)   TSManager   16/04/2015 09:04:51   1852 (0x073C)
Retrying...   TSManager   16/04/2015 09:05:03   1852 (0x073C)
CLibSMSMessageWinHttpTransport::Send: URL: xxxxxxxxxxxxxxxx:80 CCM_POST /ccm_system/request   TSManager   16/04/2015 09:05:03   1852 (0x073C)
Error. Received 0x80072ee7 from WinHttpSendRequest.   TSManager   16/04/2015 09:05:03   1852 (0x073C)
unknown host (gethostbyname failed)   TSManager   16/04/2015 09:05:03   1852 (0x073C)
hr, HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8936)   TSManager   16/04/2015 09:05:03   1852 (0x073C)
sending with winhttp failed; 80072ee7   TSManager   16/04/2015 09:05:03   1852 (0x073C)
Will retry in 22 second(s)   TSManager   16/04/2015 09:05:03   1852 (0x073C)
Retrying...   TSManager   16/04/2015 09:05:25   1852 (0x073C)
CLibSMSMessageWinHttpTransport::Send: URL: xxxxxxxxxxxxxxxx:80 CCM_POST /ccm_system/request   TSManager   16/04/2015 09:05:25   1852 (0x073C)
Error. Received 0x80072ee7 from WinHttpSendRequest.   TSManager   16/04/2015 09:05:25   1852 (0x073C)
unknown host (gethostbyname failed)   TSManager   16/04/2015 09:05:25   1852 (0x073C)
hr, HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8936)   TSManager   16/04/2015 09:05:25   1852 (0x073C)
sending with winhttp failed; 80072ee7   TSManager   16/04/2015 09:05:25   1852 (0x073C)
Will retry in 44 second(s)   TSManager   16/04/2015 09:05:25   1852 (0x073C)
Retrying...   TSManager   16/04/2015 09:06:09   1852 (0x073C)
CLibSMSMessageWinHttpTransport::Send: URL: xxxxxxxxxxxxxxxx:80 CCM_POST /ccm_system/request   TSManager   16/04/2015 09:06:09   1852 (0x073C)
Error. Received 0x80072ee7 from WinHttpSendRequest.   TSManager   16/04/2015 09:06:09   1852 (0x073C)
unknown host (gethostbyname failed)   TSManager   16/04/2015 09:06:09   1852 (0x073C)
hr, HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8936)   TSManager   16/04/2015 09:06:09   1852 (0x073C)
sending with winhttp failed; 80072ee7   TSManager   16/04/2015 09:06:09   1852 (0x073C)
End of retries   TSManager   16/04/2015 09:06:09   1852 (0x073C)
Send (pReply, nReplySize), HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,1952)   TSManager   16/04/2015 09:06:09   1852 (0x073C)
failed to send the request   TSManager   16/04/2015 09:06:09   1852 (0x073C)
DoRequest (sReply, false), HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,4050)   TSManager   16/04/2015 09:06:09   1852 (0x073C)
Failed to send status message (80072ee7)   TSManager   16/04/2015 09:06:09   1852 (0x073C)
smStatusMessage.Send(), HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,5394)   TSManager   16/04/2015 09:06:09   1852 (0x073C)
Error calling message lib Send(). Code 0x80072ee7   TSManager   16/04/2015 09:06:09   1852 (0x073C)
Non fatal error 0x80072ee7 in sending task sequence execution status message to MP   TSManager   16/04/2015 09:06:09   1852 (0x073C)
Finalize logging request ignored from process 2932   TSManager   16/04/2015 09:06:09   1852 (0x073C)
Waiting for CcmExec service to be fully operational   TSManager   16/04/2015 09:06:09   1852 (0x073C)
CcmExec service is up and fully operational   TSManager   16/04/2015 09:06:09   1852 (0x073C)
Access handle will be read from _SMSTSActiveRequestHandle   TSManager   16/04/2015 09:06:09   1852 (0x073C)
Access handle: {4A5E656D-DDA8-4700-BF81-E13CB4B85EA9}   TSManager   16/04/2015 09:06:09   1852 (0x073C)
Attempting to release request using {4A5E656D-DDA8-4700-BF81-E13CB4B85EA9}   TSManager   16/04/2015 09:06:09   1852 (0x073C)
CoCreateInstance succeeded   TSManager   16/04/2015 09:06:09   1852 (0x073C)
pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136)   TSManager   16/04/2015 09:06:09   1852 (0x073C)
ReleaseRequest failed with error code 0x80004005   TSManager   16/04/2015 09:06:09   1852 (0x073C)
Task Sequence Manager could not release active TS request. code 80004005   TSManager   16/04/2015 09:06:09   1852 (0x073C)
Process completed with exit code 2147500037   TSMBootstrap   16/04/2015 09:06:09   2364 (0x093C)
Exiting with return code 0x80004005   TSMBootstrap   16/04/2015 09:06:09   2364 (0x093C)
Process completed with exit code 2147500037   OSDSetupHook   16/04/2015 09:06:09   1360 (0x0550)
Task sequence completed 0x80004005   OSDSetupHook   16/04/2015 09:06:09   1360 (0x0550)
Waiting for command shell to complete.   OSDSetupHook   16/04/2015 09:06:09   1440 (0x05A0)
Any idea welcomed... thank you in advance !
Solear

Hi,
You should first make sure that the UNC path you provided to create your Wim is correct and also that your account has enough permissions to write in the share.
The verify option check if the password is correct but I'm not sure that it checks permissions.
Mickael,
My technet galleries contributions :
ConfigMgr driver injector
SCCM Collection splitter
ConfigMgr TS Tools
Customize WinPE images with powershell

Client Inactive--SCCM 2012 R2-ERROR

Hi all, I've been troubled days .. please help.
see the following link
http://www.windows-noob.com/forums/index.php?/topic/9131-help-please-do-not-install-secondary-site-clients-i-reinstalled-the-site-and-nothing/?p=34889

Hi,
For client with no site information, you need to make sure your boundary group match client IP or AD site.
Some more troubleshooting links:
http://deployos.com/blog/2012/10/01/using-and-troubleshooting-client-push-in-sccm
http://eskonr.com/2010/11/sccm-client-installation-troubleshooting-steps-check-list/
http://blogs.technet.com/b/configurationmgr/archive/2009/08/10/troubleshooting-issues-where-clients-are-not-reporting.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 Deploy --- Error = The software change returned error code 0x87D00324(-2016410844).

Deployment to the client is successful but the error reported within Clients "SCCM Software Center"
The software change returned error code 0x87D00324(-2016410844).
Also States on "Status" Past Due - Will be Retired"
Can't figure this one out and I did some googling with no success in finding a solution?
I am running an Adobe Flash install (.EXE)
Any help or direction would be greatly appreciated
RF

Hi,
Thank you for your response
""Wow6432Node is not valid on x86 systems."""
Yes, that I am aware of that.....Windows on Windows, for running x86 apps on x64 Windows<o:p></o:p>
When I first created the detection method I had only created the "WoW" Check
for Flash value in the reg, which was running against both x86 & x64 Win 7
systems, and forgot to include the x64 check/, either case, the error appeared
on the WOW check. Presently I have 2 "Detection Clauses" one for x86
and the second clause is x64 ( non WOW Path), and still receive the same erorrs
on both x86 & x64 systems. ( and x64 system have both reg entries since Win 7 has both x86 & x64 versions of IE)
Looking at the registry of an x64 Win 7 system I find the Adobe Flash registry entry is
located in both Wow6432Node and also in the x64 sections of the reg.....<o:p></o:p>
""""Also, why use the default value? I doubt there's anything in there (the default value is the
value display in a key in regedit with the name of
"@").""""<o:p></o:p>
When Default Value is selected the boxes/options below that allow for more detailed
information to be entered when performing the "reg check"? This is
where I had been able to enter specific Build/Version to look for, Flash
11.4.402.265, so that if it does not discover the build # it will proceed with
the install.....<o:p></o:p>
I figured having the option to check for Build/Version # would omit SCCM reinstalling on
systems that have build 11.4.402.265 already?<o:p></o:p>
From what I understand is that Adobe Flash x64 installs both versions x86 & x64 since Win 7 has both IE
x86 & IE x64 bit versions by default, and this would explain the Wow6432Node reg
entries and the true x64 reg entries in both locations when installing.
Overall, I am thinking I may be heading in the wrong direction in resolving this, as x86 & x64 versions install on the systems, so this tells me it is detecting when / what needs to be installed, the issue seems to be how it reports back after installing......
Looking further, I view the Content Status Page, and there reporting info in Asset Detail under [Success] all others { / In Progresss / Error /Unknown } has no info......
If this helps provide further details.....
Thanks
Regards,
Ron
RF

SCCM 2012 - PXE error

Similar Messages

Maybe you are looking for