SCCM 2012 Query collection problem

Hi!
I have problem with query based collections. I want to create collection where is computers with db2 client and sql express installed. Query is like that:
select * from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceId = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.ProdID = "{63F6DCD6-0D5C-4A07-B27C-3AE3E809D6E0}"
and SMS_G_System_ADD_REMOVE_PROGRAMS.ProdID = "{2AFFFDD7-ED85-4A90-8C52-5DA9EBDC9B8F}"
When I choose one of them, then it finds workstations. Where is my mistake or I need to do it another way?
Best regards
Ronald

Hello Ronald,
your Question is important for me because, i search for an possibility to Install the DB2 Client over SCCM environment. My way is over an Command file:
@echo off
net use s: \\xxxxxxxxx\d$\SoftwareDeployment\DB2_Driver /PERSISTENT:NO
s:
setup -u PROD_CLIENT.rsp
timeout /T 600 /nobreak
net use s: /delete
But the Installation should not start, after some hours it failured with message ID 10006 and comment 1603.Do you know why it not start?

Similar Messages

IN NEED OF A SCCM 2012 QUERY THAT SHOWS LAST TIME SOFTWARE WAS USED OR OPENED

Hello
I am in need of an SCCM 2012 query that shows PCs that have Visio , Adobe Professional and Visual Studio and the last time each was used or opened. I have the query below which give me the PC name and the product. Any assistance will be very helpful
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
like "%adobe acrobat%pro%"
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
like "%visio%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%viewer%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%service pack%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%security
update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%hydra%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%MUI%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
not like "%amd%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%microsoft visio%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%vision%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%add-in%"
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
= "Microsoft Visual studio 2012 devenv" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%hotfix%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%security%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
not like "%update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%service%"

Did you create a software metering rule for each software title? if not then you need you do that first and it will take over a week before you see results.
Also keep in mind that your query will only find x86 software titles.
http://www.enhansoft.com/

SCCM 2012 QUERY THAT SHOWS SOFTWARE INSTALLED AND LAST TIME IT WAS USED OR OPENED

Hello
I am in need of an SCCM 2012 query that shows PCs that have Visio , Adobe Professional and Visual Studio and the last time each was used or opened. I have the query below which give me the PC name and the product. Any assistance will be very helpful
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
like "%adobe acrobat%pro%"
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
like "%visio%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%viewer%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%service pack%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%security
update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%hydra%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%MUI%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
not like "%amd%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%microsoft visio%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%vision%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%add-in%"
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
= "Microsoft Visual studio 2012 devenv" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%hotfix%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%security%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
not like "%update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%service%

See me reply to your other post with the exact same details, in the CM07 forum.
http://www.enhansoft.com/

Sccm 2012 query self encrypting drives

I have SCCM 2012 SP1, does anyone know of a way to query a collection, for self encrypting drives? All I really need to know is; of my "laptop" collection, which ones have Self Encrypting Drives.

For BitLocker you can use the following:
http://mssnet.wordpress.com/2012/07/25/bitlocker-reporting-in-configuration-manager-2012-8/
Cheers
Paul | sccmentor.wordpress.com

SCCM 2012 Query to find units with IPv6 Enabled?

We've found a need to locate computers that may have IPv6 enabled for audit purposes, and then we'll disable them at a later date.
Has anyone been able to create a successful query in SCCM 2012 to get that information?
I found this but it spit back the IPv4 info for all the units in our device collection, plus it's for SCCM 2007. http://www.myitforum.com/forums/Query-for-systems-with-IPv6-enabled-m227020.aspx
Appreciate any input, thanks!
This topic first appeared in the Spiceworks Community

If you're using % in the value field the operator must be "Like" . In your case, the query should look like
select SMS_R_USER.ResourceID,SMS_R_USER.ResourceType,SMS_R_USER.Name,SMS_R_USER.UniqueUserName,SMS_R_USER.WindowsNTDomain from SMS_R_User where SMS_R_User.UserPrincipalName Like
"TQA%" order by SMS_R_User.UserPrincipalName
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

Windows 8.1 laptop computer not showing in SCCM 2012 devices collection

Hi,
I am trying to do a POC on license management from SCCM 2012. I have configures a SCCM 2012 server and intune subscription also. I have Android, iOS and desktop apps uploaded (.msi). when I enrolled android and ios devices its shows up in SCCM,
devices collection but do not show in Intune.
my company portal is nicely coming up on android and iOS tabs. on the other hand company portal showing only Web apps, on a win8.1/7 laptop.
When I tried to enroll 2 windows 8.1/ 7 laptop (intel x86), they donot show up in SCCM. clients of intune manually installed, endpoint protection of SCCM installed also on both boxes.
I tried updating membership in SCCM for both know and unknown type, many time and also triggered Deployment of some desktop app, to the win 8.1 laptops. the desktops are showing in Intune All devices -> all computers nicely. But
not in SCCM2012.
what did I missed, I tried to add all the logical roles. below is some details what shows up in Intune:
indranil

If you installed the Intune agents on the Win 8.1 and Win 7 systems, then they will never show up in ConfigMgr.
There are basically two parts of Intune -- a Mobile Device Management piece and a Windows management piece. The Intune connector in ConfigMgr takes over the MDM piece and nothing more. When ConfigMgr takes over this MDM piece, as Torsten said, all MDM devices
enrolled show up in ConfigMgr and not Intune because that's now controlled by ConfigMgr. The Windows management piece remains unchanged and separate though and so those systems will be directly managed by Intune only or ConfigMgr only.
So you have three options there:
- Install the ConfigMgr agent and managed using COnfigMgr
- Install the Intune agent and manage using Intune
- Enroll the systems using OMA-DM which manages them as if they were devices. This means so you don't get SCEP or Windows Updates or most of the other ConfigMgr functionality. This is only valid for Win 8.1 though.
Jason | http://blog.configmgrftw.com

How to inner join attribuet from user with system resource on sccm 2012 query

Hi , I am using SCCM 2012. Trying to create a WQL query to get list of computers with department name and netbios names,etc. these are in USER and SYSTEM RESOURCE object type seperately. The query wizard doesn't allow me to choose sytem
resource and USER attribute at same time. In JOIN, the inner join also doesn't have SYSTEM RESOURCE attribute class for me to join it with USER attribute class. Any way to resolve this issue so that I can get a query as mentioned?
I tried the wql below and pasted to my test query, it gave an error. I guess it's because that wql is on sccm2007.
Please advise,thanks!
http://social.technet.microsoft.com/Forums/en-US/8c47f069-5390-45bd-a619-5f5498947baa/sccm-query-which-joins-system-resource-and-user-resource?forum=configmgrgeneral
http://social.technet.microsoft.com/Forums/en-US/8c47f069-5390-45bd-a619-5f5498947baa/sccm-query-which-joins-system-resource-and-user-resource?forum=configmgrgeneral
Thanks and best regards, -- KF

Hi,
Try the suggestion by Garth Jones or post a new thread at
http://social.technet.microsoft.com/Forums/en-US/home?forum=ITCG
I am not familiar with WQL, maybe you could get better help at the forum above.
Juke Chou
TechNet Community Support

SCCM 2012 and collection settings

Hi all,
I am migrating SCCM 2007 to SCCM 2012 SP1 CU3.
All my 1200 collections are migrated to SCCM 2012 and the incremental option is enabled on most of my collections (about 1100).
Now I found out that my collections are updating very very slow.....
I read an article that best practice is to enable a maximum of 200 collections with the incremental option.
So i ran a powershell script to disable this option on my collections....
Now it seems that collection updates are faster again...
Do I need to disable the incremental option on all collections and enable the schedule full update eg. very 30 minutes ?
I hope someone could share his experience with this....

I ran this test this weekend since it has been a while since I have do this. Short version, yes I’m getting confused between CM07 and CM12. CM07 this work perfectly for User and PCs. In CM12 this only work perfectly for Users. If you want
to make this work for PC you need to do the following.
PC
Add the PC to the Security Group.
Wait of the Security group to replicate to the PC’s local DCS.
Reboot the PCs
Wait for the Discovery Data(DD) collection Cycle to occur, (default is every 7 days), However I recommend making this daily and in some cases hourly.
Once the DD data is in the CM12 db. You need to wait for the Collection to update (default is every 7 days)
Then you need to wait for the PC to retrieve it’s Machine policies. (~1 hour)
User:
Add the User to the Security Group.
Wait of the Security group to replicate to the PC’s local DCS.
Logon to the PC. With newer OS , just unlocking the PC will
do the trick.
Then you need to wait for the User Polices to retrieved.(~1 hour)
http://www.enhansoft.com/

SCCM 2012 - Query

Hi,
I have primary SCCM 2012 SP1, SCCM database server and standalone reporting SQL server separately.
1. I am trying to enable reporting service role in which it is detecting the primary database automatically. When i enter standalone reporting SQL server with instance name and i dont know what to enter in database name. I am getting an error while verifying.
Is it possible to configure the reporting services role if the reporting SQL server is different from primary SCCM database
2. I have a proxy server as per my understanding, i need to open WSUS user port 80 or 443 to connect to microsoft website to download the patches and client to WSUS is 8531 or 8532. Is this correct. Please correct me
3. In SCCM 2012 SP1 requires computer account and installation account needs to be added as a local admin on the primary database and reporting SQL server database.
4. I have MCAFEE antivirus enabled on all the servers. So for SCCM SQL replication is it fine to allow inbound rules for 1433 and 4022 on SQL service broker or i need to create exception for 1433 and 4022 on MCAFEE antivirus
Regards, Pratap

1. I got some information, i think SQL reporting person hasnt created a data source to point to site database. Because of which when i run the reporting services role it is not detecting the reporting server instance. Do we have doc on how to create a data
source. Hope this should be correct solution
2. So what happens in case if i use default website for WSUS. Which port i should open in proxy
3. But still component
/hierarchy component shows a critical error stating account doesnt have proper privelege on site system (database)
Regards, Pratap

SCCM 2012 Query to populate collection with users of 3 similar characters

Hi,
I'm trying to create a query to populate a collection for my QA users. I have 5 QA users and about 10,000 users on the domain. Those users are inside a "TQA" group so I just need to know a way to create a dynamic collection that will be populated
automatically with this TQA users and because of more people will be joining the ranks of QA testing the collection will help to mitigate maintenance.
At the moment we have a query that doesn't works at all so I had to manually update my collections every time we test a product. My query code does not seems to populate with the info I need.
This is the code:
select SMS_R_USER.ResourceID,SMS_R_USER.ResourceType,SMS_R_USER.Name,SMS_R_USER.UniqueUserName,SMS_R_USER.WindowsNTDomain from SMS_R_User where SMS_R_User.UserPrincipalName = "TQA%" order by SMS_R_User.UserPrincipalName
Any thoughts ?
Kind Regards.

If you're using % in the value field the operator must be "Like" . In your case, the query should look like
select SMS_R_USER.ResourceID,SMS_R_USER.ResourceType,SMS_R_USER.Name,SMS_R_USER.UniqueUserName,SMS_R_USER.WindowsNTDomain from SMS_R_User where SMS_R_User.UserPrincipalName Like
"TQA%" order by SMS_R_User.UserPrincipalName
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

SCCM 2012 Query report for specific software installed.

I have Reporting point installed and it seems to be working as I was able to run OS reports.
Here's what I would like to do.
1. I need a query/report to show us all the machines that do not have Microsoft Forefront Endpoint Protection installed.
2. I also need a query/report showing what machines still have Sophos AV installed.
Any help is greatly appreciated it.
Thanks,
Voev

I was not able to use the Reporting to get computers without FEP installed. So I did a workaround.
Create Device Collection for computers with FEP installed
1. Device Collections => Create Device Collection =>name it "Computers with FEP installed=> Query Rule Properties => Edit Query Statement => Criteria tab => Add the following statements
Criterion Type: Simple value
Where: Installed Software - ARPDisplay Name
Operator: is equal to
Value: System Center 2012 Endpoint Protection (as appeared in Add/remove program name)
Create Device Collection for computers without FEP installed
1. Device Collections => Create Device Collection => Name "Computers without FEP Installed" => Query Rule Properties => Add Rule => Include Collections => Tick "All Systems" => OK => then you need to add
the Exclude by => Add Rule => Exclude Collections => Tick " Computers with FEP Installed => OK
So in my "All Systems" Collection has 1000 members
Computers with FEP Installed collection has 900 members
Computers without FEP Installed collection has 100 members
Add the with FEP installed & without FEP installed collections together is equal to 1000 members of the All Systems.

SCCM 2012 - Query Local Admin Users

Hi Guys,
I´m trying to get all users that are local admins of my network using sccm12.
How it´s possible?
Thank you.

Hi,
We can use the following query as follows
SELECT DISTINCT SYS.Netbios_Name0, SYS.User_Name0, LocalAdminMembers.TimeStamp, LocalAdminMembers.Type0 as Object LocalAdminMembers.Account0, LocalAdminMembers.Domain0 FROM fn_rbac_GS_LocalAdminMembers0(@UserSIDs) LocalAdminMembers JOIN fn_rbac_R_System(@UserSIDs)
SYS ON SYS.ResourceID = LocalAdminMembers.ResourceID WHERE SYS.Netbios_Name0 LIKE @variable ORDER BY SYS.Netbios_Name0
To create a custom report
1. Go to SCCM console – Reports – Create report
2. Complete the Reporting Wizard. The MS SQL Report Builder will be opened up now
3. Double Click the Table or Matrix which will open to select a new dataset window. Select ‘Create a dataset’
4. Select the existing Data source connection and enter the data source credentials
5. Under Design a Query window, Select “Edit as text” and copy the above query
6. Next arrange the field as per the attached doc
7. Choose the Layout of the Report and complete the wizard
8. Right Click on report, where the empty area of report page and select properties. Go to reference tab, Click on assemblies.
Add following assemblie - SrsResources, culture=neutral
And Click OK.
9. Select UserSIDs under Paramter and edit the properties
10. Go to Default Value and select Specific Values and Add expression. Leave the rest of the tab as default and complete it
11. Select Variable under Parameter and edit the properties
12. Type Computer Name under Prompt field and leave the rest of the tab as default and complete it.
13. Type Computer Name under Prompt field and leave the rest of the tab as default and complete it.
You are done.
Regards,
Vinod

SCCM 2012 R2 - Architecture problem/ Suggestions???

Hello I have to build architecture for SCCM on 2012 R2 such the plan this below. I suggest 1 primary site installed in the protect zone with a SQL 2012 Server in the secure zone. The customers
will have no access to the primary server because customer have access only to the private zone( DMZ). What do you suggest?

Also, I strongly suggest you consider taking a course like Kent's
'Mastering ConfigMgr 2021 R2'. Or, if you have a Microsoft Premier Support agreement, schedule some time to go through ConfigMgr Architecture and Desig with one of their experts.
ConfigMgr is the largest, most complex tool that Microsoft sells. It is not something where you can just fumble through it. And, if it isn't implemented properly from the beginning, making the important parts work can be very difficult.
While there are
2,996 pages of TechNet documentation for ConfigMgr, it is largely descriptive, not prescriptive. This means it will tell you
what every setting can do, but not when in the real-world you would use it one way or another. This is where a real-world class like Kent's pays off, since he can explain not only what to do and how, but why it is important in given scenarios.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Rebuilding PCs using SCCM 2012 TS / Collections

Hi guys and girls,
I am looking to setup a process whereby an existing PC can be rebuilt.
Currently - we boot up the PCs, or Laptops using USB Media and then select the relevant task sequence and away you go. That's fine for new builds..
But for rebuilds, I would like something whereby the PC detects a rebuild task, i.e. through an advertisement in a collection which it joins, by AD group membership.
When this happens, I would like the machine to be removed from AD and SCCM in its current form so that when its rebuilt the GUIDs and policies get refreshed.
My questions are:
(a) Has anyone done this via a Task Sequence...
The machine is already turned on, detects the policy update/refresh - then restarts itself and self-builds again after deleting itself from AD/SCCM
(b) The above happens but the machine just rebuilds itself without removing first.
I have already setup the task sequence, and added it to the collection. I have also created an AD group to add PCs to, not sure if that was the best way but I want to empower the desktop team in my company so that they are less likely to make any mistakes.
Thoughts & suggestions welcome...

There are alot of ways to do this, it really depends on what is best for your organization.
The only question I have before giving some suggestions is, why delete the record in AD and SCCM? Is there some cleanup you are trying to do? Will they be renamed?
Daniel Ratliff | http://www.PotentEngineer.com |
@PotentEngineer

SCCM 2012 SCUP Updates problem

Hi Everyone,
I'm having a strange issue in my SCCM2012 environment.
We deploy updates via WSUS and SCUP.
Actually we have two infrastructure, one with SCCM2007 and one with SCCM2012.
We are planning to migrate the 100% of the infrastructure on SCCM2012.
The problem is that when I deploy an OSD Task from SCCM2012 the updates on the client are installed (java & Apple).
If I upgrade a SCCM2007 Client on 2012, the Java & Apple updates fail.
Any suggestion?
Cheers

Hi,
The error is:
Failed to initiate install of WSUS updates, error = 0x80246002   UpdatesHandler              09.10.2014 13:38:32        3196 (0x0C7C)
Failed to start WSUSUpdate, error = 0x80246002             UpdatesHandler              09.10.2014 13:38:32
3196 (0x0C7C)
Execution completed for the job ({3647C826-C65C-4FBD-95A8-F2AD879398DC}).           UpdatesHandler              09.10.2014
13:38:32               5300 (0x14B4)
CDeploymentJob -- Failed to start procesing of the update (501d3a69-3fb8-43bc-b347-4aff56e4e3cc). Error = 0x80246002                UpdatesHandler
09.10.2014 13:38:32        3196 (0x0C7C)

SCCM 2012 Query collection problem

Similar Messages

Maybe you are looking for