SCCM 2012 R2 and folder SMSPCKSIG??

Hello!
My question is simple, SCCM 2012 SMSPCKSIG folder contains another folders and no more tar files, is a change in design?
I' ve been looking for any article or doc in internet that explains this change but I don't find anything, please anyone can help me?
Thanks!! 
MCITP Exchange 2007, MCITP Windows Server 2008, MCSE Windows Server 2003 + Messaging

This should explain all
As of ConfigMgr 2012, Configuration Manager uses a new feature called Content Library that includes a feature for SIS / Single Instance Store. You can read more about it in the link provided by iainrobins above.
Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa

Similar Messages

  • SCCM 2012 R2 and NEW SMSPCKSIG

    I don´t see any oficial documentation from Microsoft that explains why this folder (SMSPKGSIG) now have other folders and no more .tar files.
    Thanks
    MCITP Exchange 2007, MCITP Windows Server 2008, MCSE Windows Server 2003 + Messaging

    Thank Torsten, but exists any documentation where this information is explained , all documentation explains that this directory contains tar files and this is wrong (only correct for SCCM 2007)...
    MCITP Exchange 2007, MCITP Windows Server 2008, MCSE Windows Server 2003 + Messaging

  • Wifi profiles SCCM 2012 R2 and Windows Intune

    Hi All,
    A quick question regarding SCCM 2012 R2 and the new Wifi Profiles feature...
    Can anyone confirm if you need windows Intune combined with SCCM 2012 R2 to be able to deploy WIFI profiles to users devices i.e Windows 8.1, IOS and Android platforms?  Microsoft documentation is not clear on this subject.
    Any help would be much appreciated.
    Regards PowerShell90

    It not as straight forward as one would hope. I am running the latest version of SCCM 2012 R2 CU2 connected to my Windows Intune subscription. There are a lot of hickups. One is that the direct of management needs to be all or nothing. In other words you
    either need to use Windows Intune solely to manage your devices or SCCM 2012 R2 (via connector). If the later then you must do everything from in SCCM 2012 R2. You cannot hybrid manage your devices as this will screw things up.
    Android for some reason is left out on a lot of features. I would think that MS Devs would work hard on the market share that being Android, not iOS. Any way, accord to some official MS articles Android is supported, but others claim that not all features
    are, these being the important ones like Email and Wi-Fi Profiles. They simply do not work.
    I think MS is heading in the right direction but there is a lot of work that needs to be done before this is a competitive product. I could care less if connects to my SCCM 2012 R2 server or not. Here are few things that I sent o a MS Support Rep today that
    need to be address.
    1. Better response time when updating devices after enrollment (e.g. Name change).
    2. The ability to locked down uninstalling Windows Intune from device.<o:p></o:p>
    3. The ability to locked down certain features in the Windows Intune app on device (e.g. User can reset device with Windows Intune app, rename, etc...).<o:p></o:p>
    4. Ability to rename device in either Windows Intune Admin Portal and/or SCCM 2-12 R2.<o:p></o:p>

  • Deploy Java Updates using SCCM 2012 SP1 and SCUP 2011

    What is the best way to deploy Java updates using sccm 2012 SP1 and SCUP 2011?

    I didn´t find Kent´s blog useful when talking about Java. I can deploy Adobe products fine, but I have to import Java manually because not having Shavlik certificate. So with that said, I have the fallowing problem;
    I have full offline installer unpacked, .msi file and Data1.cab. When I´m importing these binaries to SCUP, I only can point to .msi. Doing that, installation fails in client side fails because of lack of data1.cab fine, which is the main file.
    Should I use some other downloaded files of Java? I couldn´t find any Java-update-file only type of files to download.

  • SCCM 2012 R2 and windows 7 folder redirection

    Hello gurus
    I want to ask a quick question. Does anyone know if I can do folder redirection, offline folders, roaming profiles and network drive on Windows 7 using SCCM 2012 R2?
    Thanks in advance. 
    Regards,

    The setting does not apply to Windows 7. I tested and DCMagent just thought it is Non-applicable.
    Juke Chou
    TechNet Community Support

  • SCCM 2012 SP1 and MDT 2012 Task Sequence Templates, MDT File/Settings Packages

    We're setting up SCCM 2012 integrated with MDT 2012 for our OSD. My main issue is finding actual reference material for the MDT task sequence templates when integrated with SCCM. The MDT documentation has a lot of information on variables and task sequences
    outside of SCCM integration. 
    One thing I'd love to find information on is what's actually going on during an MDT Client Task Sequence template. I found this http://social.technet.microsoft.com/Forums/en-US/645a77b2-5be6-431d-818c-57d24b1435cc/understanding-mdt-task-sequence?forum=configmgrosd but
    it doesn't delve into the kind of detail I'm looking for. I can dig up information through the MDT reference material on some things, but I just can't find anything out there that actually walks you through an SCCM/MDT task sequence template. For instance,
    under State Restore what is being referenced in Install Software with base variable name PACKAGES, vs Install Applications and base variable name COALESCED APPS. And, where are you supposed to put these applications? That's just a specific example, I'm hoping
    to find some kind of walkthrough.
    Two things I'm hazy on are the MDT packages. What exactly are the MDT Settings Package, and the MDT Files Package? What are they used for? What benefits do you get out of using them? And, how exactly do you use them? I know one of them has something to do
    with customsettings.ini, but what's the point of using SCCM with MDT if you still have to muck around in the customsettings.ini file?
    Either way, it seems like there are a lot of references to SCCM task sequences, and a lot of references to MDT task sequences. But, not together. Which is a bit annoying since the MDT-integrated task sequence templates are very obviously different than either
    SCCM or MDT by itself. Any help would be appreciated, even just information on where to look. Maybe I'm just really bad at finding reference material for SCCM/MDT. Thanks. 

    When MDT integrated with SCCM, We need the following MDT components to be created:
    MDT Boot image
    MDT Toolkit Files
    MDT Settings
    The MDT boot image (for example) gives you extra abilities over the standard ConfigMgr boot image such as the ability to display a HTA Refer here:
    http://www.windows-noob.com/forums/index.php?/forum/98-frontends-and-web-services/
    MDT Files once created, you will find UDIWizard_Config.Xml file in which you can start User driven Installation OSD using UDI designer.
    Refer these links for better understanding:
    http://www.windows-noob.com/forums/index.php?/topic/5131-using-sccm-2012-rc-in-a-lab-part-16-integrating-mdt-2012-rc1-with-configuration-manager-2012/
    http://www.windows-noob.com/forums/index.php?/topic/5221-using-sccm-2012-rc-in-a-lab-part-17-using-mdt-2012-rc1-within-configuration-manager-2012/
    http://www.windows-noob.com/forums/index.php?/topic/5250-using-sccm-2012-rc-in-a-lab-part-18-deploying-a-udi-client-task-sequence-with-mdt-2012-rc1-integrated-in-configuration-manager-2012/
    Thanks, Prabha G
    Thanks for the quick reply. But, what about the MDT Settings Package? Also, both have a pretty big folder structure for each package. Surely it does more than just provide a couple xml and ini files? I'm not looking for anyone to spoon-feed me the information,
    but at least a pointer in the right direction for finding the reference material. It seems for SCCM/MDT integration you have to go all over the place finding scraps of information to put together. 
    Also, any info on the SCCM/MDT task sequence templates? Thanks. 

  • Sccm 2012 migration and MDT

    In our current environment we have sccm 2007 and MDT 2013 separate to deploy workstation OS images. We have MDT just referencing SCCM package ID's (package path on the DP) to install applications during the build process.
    We are currently migrating to SCCM 2012 and because the DP folder structure has changed now - i.e. 'SCCMContentLib' can we still use MDT separately and reference the 'DataLib' directory in MDT or is the best option to fully integrate MDT in SCCM?

    Hi,
    The following two blog could help you to understand SCCMContentLib structure.
    An adventure in the sccmcontentlib - single instance store
    http://blogs.technet.com/b/hhoy/archive/2012/05/31/an-adventure-in-the-sccmcontentlib-single-instance-store.aspx
    Understanding the Configuration Manager Content Library
    http://blogs.technet.com/b/configmgrteam/archive/2013/10/29/understanding-the-configuration-manager-content-library.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

    I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012.  Everything installs without error.  I have acquired a certificate for SCUP signing from the internal Enterprise CA.  I have
    verified the signing certificate has a 1024 bit key.  I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer.  When I attempt to publish a Flash update with Full content I receive the following
    error:
    2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
    \\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
    I have redone the certificates three times with no luck.  I can import metadata, but any attempt to download content results in the verification error.
    TIA

    Hi Joyce,
    This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048.  Thank you for being my second set of eyes.
    I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
    and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
    2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
    \\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
    Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect?  In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic." 
    No Flash updates in the ConfigMgr console are marked as downloaded.  I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works. 
    Comments and suggestions welcome.

  • How can I remove the SCCM 2012 client and reinstall SCCM 2007 client on all of our computers

    Hello All
    We have  bit of a problem. Our virtual SCCM 2012 r2 server was deleted and the back solution we had in place keeps failing.
    We do have our sccm 2007 server still in place but its only role was imaging as we transferred roles from one to another.
    My question is now our support needs to remote into pcs but cant because the CM12 server is gone. How can I remove the 2012 client from all of our companies computers and reinstall the CM07 client so we can remote into computers again.
    Thanks in advance!
    Phil
    Phil Balderos

    Run a ccmsetup /uninstall on the clients. You may need to run via PSExec. Then push out the SCCM 2007 client via the 2k7 console.
    Cheers
    Paul | sccmentor.wordpress.com
    Thanks Paul!
    I have to do this on over 350 computers and 110 servers. How can I do it on a more massive scale?
    Phil Balderos
    I would check Torsten's approach first and see if the ccmsetup will uninstall the 2012 version. I'm not sure. Obviously the other way round is fine.
    Using PSexec you can script this to call up a txt file of all your servers/computers and run the uninstall.
    e.g. 
    for /f "tokens=*" %a in (computers.txt) do psexec \\%a %WINDIR%\ccmsetup\ccmsetup.exe /uninstall 
    If your account has privileges on all devices you won't need to add in any username/password credentials. Obviously only devices that are switched on and you have access to will run this.
    Cheers
    Paul | sccmentor.wordpress.com

  • Windows 8.1 Update (with WinPE 5.1) ADK + SCCM 2012 R2 and WinXP

    Hello,
    I see new ADK version (8.1 Update) is released
    http://www.microsoft.com/en-US/download/confirmation.aspx?id=39982
    It contains WinPE 5.1 and new USMT (which version?), does it support migration from WinXP to Win7?
    Previously I used USMT5 (instead of 6.3) and modified WinPE 5.0 with bootsect.exe from WinPE 4.0 (from ADK 8.0) on SCCM 2012 R2 CU3.
    And can I use ADK 8.1 Update with SCCM 2012 R2?

    He does answer your question about the USMT version.
    The rest still applies in terms of XP support. See below.
    http://blogs.technet.com/b/mniehaus/archive/2014/01/09/migrating-from-windows-xp-to-windows-8-1-using-mdt-2013.aspx
    Yes, ConfigMgr 2012 R2 is supported.
    http://blogs.technet.com/b/configmgrteam/archive/2014/04/03/understanding-the-adk-for-windows-8-1-update-and-configmgr-osd.aspx
    Daniel Ratliff | http://www.PotentEngineer.com
    in the article I found:
    Windows PE version 5.1 is not needed for Configuration Manager and can actually be problematic if you try to use it. Windows PE 5.0 can continue to be used to deploy Windows 8.1 Update. There is a documented process to upgrade Windows PE to version 5.1,
    but this should be considered incompatible with Configuration Manager at this time.
    So for a new installation of SCCM 2012 R2 I can install ADK 8.1 update because in contains WinPE 5.0 and option to update to 5.1. And unclear about XP, it seems XP is not supported again.
    Also fourth release was in September 2014, but article was posted in April 2014.

  • SCCM 2012 R2 and Windows 8.1

    Hi,
    I have installed SCCM 2012 R2. SCCM client deployed on 10 PCs and I can explore Hardware resources on all PCs except 1 PC which is 8.1
    so my question now does SCCM 2012 R2 supports 8.1?
    Thanks,
    Kareem Behery

    Hi,
    Yes, ConfigMgr 2012 R2 supports Windows 8.1. Check the Windows 8.1 computer to make sure that the SCCM client is operational and sends in Inventory to the Site server. Inventpryagent.log file on the computer is a good place to start.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Deploy UDI Windows 10 with SCCM 2012 R2 and MDT 2013 Update 1

    Hi,
    Trying use "User-Driven Installation"  with
    SCCM 2012
    R2 CU4 and MDT
    2013 Update 1 for deploy Windows
    10.
    Created MDT Task Sequences with
    template "Client Task sequence"
    and Deployment Method "User-Driven Installation".
    When I try to deploy I have error like:
    Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
    The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows)
    ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Part smsts.log
    !--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Expand a string: WinPEandFullOS TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Executing command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf" TSManager 22.04.2015 11:36:57 1160 (0x0488)
    [ smsswd.exe ] InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    PackageID = '' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    BaseVar = '', ContinueOnError='' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    SwdAction = '0001' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Set command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Working dir 'not set' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Executing command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Process completed with exit code 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Microsoft (R) Windows Script Host Version 5.12 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Copyright (C) Microsoft Corporation. All rights reserved. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Microsoft Deployment Toolkit version: 6.3.8216.1000 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
    !--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Failed to run the action: Error in the task sequence.
    The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
    MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set a global environment variable _SMSTSLastActionRetCode=5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Clear local default environment TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Let the parent group (Gather Logs and StateStore on Failure) decides whether to continue execution TSManager 22.04.2015 11:36:57 1160 (0x0488)
    The execution of the group (Gather Logs and StateStore on Failure) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
    The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
    MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
    The command completed successfully. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
    Successfully launched command shell. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)

    MDT Updates for Windows 10 Technical Preview Build 10041
    Если Вам помог чей-либо ответ, пожалуйста, не забывайте жать на кнопку "Предложить как ответ" или "Пометить как ответ".
    http://zalozny.com.ua

  • Installation of SCCM 2012 R2 and SQL Server 2014 error

    Hello All,
    I am attempting to setup SQL Server 2014 and SCCM 2012 R2 but I keep running into an error stating that "Configuration Manager requires Microsoft SQL Server
    2008 SP2 w/ CU9........ all the way up to Microsoft SQL Server 2012 with CU2 or higher." I am using all evaluation versions for this configuration as we are looking to test and evaluate the products. I was trying it with SQL 2014 because I was running
    into the same error with SQL 2012 and according to "http://blogs.technet.com/b/configmgrteam/archive/2015/03/30/updated-sc2012-configmgr-sp1-and-sc2012r2-configmgr-support-sql-server-2014.aspx" SQL
    2014 is supported with SCCM 2012 R2. SQL is installed locally on the same box. 
    Any suggestions would be appreciated.
    Thanks,
    Tucker
    Update: When running the Pre-Req check these are some of the failed returns.....
    SQL Server Edition: Failed: Configuration Manager primary site and central administration site don't support SQL Server Express Edition
    Not sure why it is recognizing SQL Express as this is a new machine.
    SQL Server service running account: Failed: The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service name> or LOCAL SERVICE.  You must configure
    the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
    For the SQL Service I am using a domain account created specifically for this.

    This has nothing to do with moving or restoring. The kb article says "This hotfix provides updated versions of the setup files and enables new installations
    of the System Center 2012 R2 Configuration Manager site database role and the System Center 2012 Configuration Manager SP1 site database role in Microsoft SQL Server 2014"
    Torsten Meringer | http://www.mssccmfaq.de

  • Using a custom certificate store for SCCM 2012 clients and primary site server

    I have read what seems to be all the pki related documentation out there for SCCM 2012. I have a PKI infrastructure up and running issueing certificates with an offline root through group policy autoenrollment. The problem that i'm faced with is we are migrating
    from SCCM 2007 that was in native mode and we chose not to use the CA that we used for the old SCCM environment. When the clients attempt to communicate with the M.P. it runs through all of the different certificates and adds a tremendous amount of overhead
    to the M.P. We will have ten's of thousands of clients by migration end. Could someone please point me to a document that goes over how to leverage a custom certificate store that I could then tell the new 2012 environment to use? I know that it's in there,
    I've seen it in the console. The setup is one primary site server with SQL on box and the pki I just mentioned as well as the old 2007 environment that is still live.
    I read that you can try and use SAN as a method of identifying the new certs but I haven't found a good document covering exactly how that works. Any info you could provide I would be very grateful for. Thanks.

    Jason, thank you for your reply. I'm getting the impression that you have never been in the situation where you had to deal with 2 different PKI environments. Let me state that I understand what your saying about trust. We have to configure the trusted root
    CA via GPO. That simply isn't enough, and I have a valid example to backup this claim. When the new clients got the advertisement and began the ccmsetup process I used the /pki switch among others. What the client end up doing was selecting a certificate that
    had the longest validity period which was issued by our old CA. It checked the authentication chain, found it to be valid and selected it for communication. At that point the installation failed, period, no caveats as you say. The reason the install failed
    because the new PKI infrastructure is integrated into the new environment, and the old is not. So when you said " that
    are trusted and they can use *any* cert that is trusted because at the end of the day, there is no
    difference between two valid certs that have the same purpose as long as they are trusted. "
    that is not correct. Both certs are trusted, and use the same certificate template, but only one certificate would allow the install to complete successfully.
    Once I started using the CCMCERTISSUERS
    switch the client install went swimmingly. The only reason I'm still debating this point is because someone might read this thread see your comments and assume "well I've got my new PKI configured as a trusted root CA, I should be all set" and their
    deployment will fail, just as my pilot did.
    About Intune I'm looking forward to doing a POC in the lab i built with my Note 3. I'm hoping it goes well as I really want to have our MDM migrated into ConfigMgr... I think the
    biggest obstacle outside of selling it to management will be the actual device migration from the current MDM solution. From what I understand of the enrollment process manual install and config is the only path forward.
    Thanks Jason for your post and discussion.

  • SCCM 2012 Client and Workstation Audio and Video Problems

    SCCM 2012 SP1 environment.
    We have pushed out the SCCM Client successfully to our systems - however we have found that on some computers the SCCM Client is causing an audio/video problem - specifically it appears to be with computers that connect monitors via DVI.  As an example,
    on my laptop (Dell e6420, Win7 x64) I have a docking station that connects my laptop to 2 external monitors.  With the SCCM Client installed I cannot listen to music or watch videos - the result is an unusable choppiness/stuttering listening to music
    and with a video the audio and video get out of sync.  As well, my mouse no longer functions smoothly - it jumps around.  This happens whether accessing content from a website or simply a local file on my computer.  If I uninstall the SCCM client,
    the issue goes away entirely.  I have tried disabling the SMS and Remote control services but doing so does not resolve the issue, only a client uninstall. Note that this only happens when the laptop is on the docking station - with DVI - it doesn't
    happen when the laptop is running without an external monitor or if plugged into an HDMI output device.
    At first we believed this was limited to this model of laptop in our environment (Win8 or Win7 - both result in the same problem), but now we are hearing about "audio and video issues" on Dell 990 workstations as well.  I believe these stations
    have DVI connected monitors.  Driver updates do not appear to resolve the issue.
    Has anyone experienced this in their environment?  Note that this happens on imaged workstations and workstations installed from a vanilla Windows 7 or 8 CD.

    Try installing the client without Silverlight and see if it helps (this is only used for the Application Catalog).
    ccmsetup.exe /skipprereq:silverlight.exe
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

Maybe you are looking for