SCCM 2012 R2 CAS or not CAS

Hi.
Sorry for the noob question but here it goes:
We are planning to implement SCCM 2012 R2 on our organization. We have offices across the country as well as web clients. We have multiple forests and domains that are going to have a 2-ways trusted rellation with a new domain where we're installing SCCM
as well.
The planned hierarchy is to install a primary site on each office, on a DMZ and on the new "mother" domain.
My question is, can I run reports on a primary site and get the full view of the infrastrucure and all clients, software, etc..?
Can I, from domain "A" site "A", get a report on the clients of site "B" domain "B" or is it better (or the only way) to get a CAS?
Thanks in advance

Just to reinforce the above: NO CAS!
Nothing you have stated above requires a CAS and as pointed out, the *only* technical criteria that requires a CAS and multiple primary sites is a managed client/device
count of 100,000+.
ConfigMgr does not in any way care that a client is in a different forest (trusted or untrusted -- the only exception is for user targeted deployments in untrusted forests because ConfigMgr has no way to know about those users).
Jason | http://blog.configmgrftw.com

Similar Messages

How to make oracle is case insentive ( not case sensitive)

SqlServer by default is NOT case sensitive (data content) while Oracle by default is case sensitive (data content).
please help me to give the solution
How to make oracle is case insentive ( not case sensitive)
if there is anyway to make Oracle behave like SqlServer changing NLS settings or any other Oracle settings?
I have solution for application level . it is working fine
Possible solutions:
1. You want to store data case insensitive: do an 'insert...
values(upper('Abcd'))...'.
This will put your data in upper case into the tables.
2. Your data will be mixed-case and you want to select them case
insensitive:
create 'function based indexes' on every column you want to use in
your where-clauses.
Then 'select ... where <column_name> = 'ABCD'.

What version of Oracle? Oracle 10g has a capability that can toggle this feature on and off at the session level. Prior versions do not.
For prior versions you usually have to make use of the upper and/or lower functions in your queries. Sometimes a function based index, FBI, is used to handle this.
HTH -- Mark D Powell --

SCCM 2012 Software Metering is not working

SCCM 2012 Software Metering is not working in our environment. Other than software metering, reports work just fine.
I have created a few simple software metering rules with “Acrobat.exe” and “Outlook.exe”. Rules are enabled. Rules were on at least 6 months.
When I go to software metering reports, Month parameter value is empty and I can’t choose any value.
I ran runmetersumm.exe on our server, it did not work as intended. :
Summarizing data up to 0 hours old.
File Usage Summary added -1 rows in 0 seconds.
Monthly Usage Summary added -1 rows in 0 seconds.
I am stumped. Why would it add minus rows?
Any ideas how I can make software metering work on our environment?
Thank you

Finally figured it out.
mtrmgr.log did not find any rules when I ran executables. So I knew it wasn't working on the server side.
After searching for a while, I found the solution from the link below:
http://social.technet.microsoft.com/Forums/en-US/8f048512-c357-437e-89ec-cee5356a10b1/software-metering-reports-empty?forum=configmanagergeneral
1. Deleted RULECHG.RTA under policypv.box folder
2. Removed and recreated metering rules again.
Everything is working again now.
Thank you.
I do wonder how to avoid those problems going forward though.

SCCM 2012 software update point not sync with Microsoft Updat,

Hi
Recently my SCCM 2012 software update is not syncing with microsoft update, am getting below error. can any one suggest/help me how to resolve this issue.
WebException: The remote server returned an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetAuthConfig()
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.InternetGetServerAuthConfig(ServerSyncProxy proxy, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.Authenticate(AuthorizationManager authorizationManager, Boolean checkExpiration, ServerSyncProxy proxy, Cookie cookie, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesFromUSS()
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)

am just trying to tracert catalog.update.microsoft.com
from my wsus server but it is failed, would that be the reason/
Regards,
Madhan

SCCM 2012 R2 - Site is not active

Good day,
Hope all is well.
We currently have a CAS Server, after we upgraded to 2012 R2 replication does not work anymore.
Can anyone assist me please.
I get the following errors, also tried multiple fixes.
Checking if initialization request is needed for replication group Hardware_Inventory_23 from site DTS. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:51:47.029-120><thread=6788 (0x1A84)>
AND
The current site status: ReplicationMaintenance. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:50:32.483-120><thread=8320 (0x2080)>
AND
Error: Failed to create drs init stored proc $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:50:38.381-120><thread=6788 (0x1A84)>
Error: Exception message: [Cannot drop type 'SCCM_DRS_TIME_ZONE_DATA_TYPETEMP' because it is being referenced by object 'spUpsertTIME_ZONE_DATA'. There may be other objects that reference this type.] $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014
07:50:38.381-120><thread=6788 (0x1A84)>
Error: Could not create Drs initialization stored procedures or functions for table TIME_ZONE_DATA, will retry on next cycle. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:50:38.382-120><thread=6788 (0x1A84)>
Hope to hear from you soon,
Thank you

Duplicate. See
http://social.technet.microsoft.com/Forums/en-US/fbf77346-885d-4683-97ac-0b433581ae25/sccm-2012-r2-the-current-site-status-replicationmaintenance?forum=configmanagergeneral#fbf77346-885d-4683-97ac-0b433581ae25
Locking thread.
Torsten Meringer | http://www.mssccmfaq.de

SCCM 2012: F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image": F8 works in winPE

F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image"
F8 option turned on in the boot image.
F8 debug window works in Windows PE.
F8 debug window does not show-up on F8 key-press after entering the 'Currently installed Windows 7 Image" all the way to the end of the task sequence.
But after a 'Restart Step' (and if F8 was pressed) the Task Sequence tends to pause indefinitely as if the
F8 debug screen is open in the background.
I am using SCCM 2012 SP1 (CU 1 is
not an option at the moment).
Any ideas as to how I could get the debug F8 option back?

There have been a couple reported occurrences of this (or something similar) to my knowledge with no resolution in the forums. Your best bet may be to open a case with CSS.
Also note that if you were going to do a CU, why would you pick CU1 instead of CU4? And, can I ask why it's not an option out of curiosity?
Jason | http://blog.configmgrftw.com

SCCM 2012 R2 Clients are not retrieving policy

Hi - I know this question has been asked many times before - but I have tried almost everything and a no closer to solving the problem.
Background: Recently a SCCM 2012 SP1 single stand-alone site was upgraded to SCCM 2012 R2. The site is a single stand-alone primary site with a single DP, single MP, using mixed mode
(HTTP). The R2 upgrade ran without any problem and all SCCM components are showing as healthy.
A few test SCCM 2012 SP1 clients were upgraded to the R2 client using client-push.
However the upgraded clients are not retrieving policy from the Management Point. In the Actions Tab of the SCCM client, only Machine Policy Retrieval and User Policy Retrieval are available. But kicking of those actions does not
result in any of the advertised applications, Task Sequences becoming available. Infact Custom Client Settings are not being set either (e.g. Organisation Name in software Center).
I have checked and rechecked the following:
The upgrade of the client completed successfully (checked ccmsetup.log) and the version number went from 5.00.7804.1000 (SP1) to 5.00.7958.1000 (R2).
The MP health in the SCCM console is showing healthy.
The MP access URL's load correctly when run from SCCm client computers
“http://<ServerName>/sms_mp/.sms_aut?mplist” is ok
“http://<ServerName>/sms_mp/.sms_aut?mpcert” is ok
The SCCM clients are assigned to the site correctly – verified via the SCCM client and
ClientLocation.Log
ClientIDManager.Log is not showing any errors
CCMExec.log and ExecMgr.log don't show any advertisements being executed (Execmgr.log is almost empty and only has "Software ditrbution site settings policy does not yet exist on the client). If the client is not yest
registered this is expected behaviour")
The SCCM clients are Approved and NOT Blocked in SCCM
I have attempted to upgrade the SCCM client and also completely removed and reinstalled - and both have the same result (no client policy dpwnloaded)
I have also deleted the above clients completely from SCCM, Run divoery again and pushed the client to the machines again ...with the same result (SCCM client installs, assigns to correct site and then no policy downloaded)
SCCM 2012 Boundaries are configured correctly and assigned to Boundary Groups correctly
The SCCM client’s do not have the firewall enabled
Changed boundary from AD Site to Subnet to IP Address Range: Same issue exists
Uninstalled MP role and reinstalled it: same Issue exists
Tried to connect to SCCm client using 3rd party SCCM Client center tool but cannot connect
??? Not sure what else to try ???

Hi all - sorry for the late response.
We managed to resolve the issue after logging a job with Microsoft Support.
The issue was that the SCCM 2012 R2 upgrade corrupted 2 tables in the SCCM Database - leading to corrupt SCCM client policies.
I am pasting the resolution email from Microsoft below:
(NOTE: This may not be the exact sypmtoms you are experiencing so do not implement this fix assuming it will fix your problem!)
ISSUE:
- All clients are unable to download policies from the server
CAUSE:
- Bad policies in the Database
RESOLUTION:
-Issue with PADbID - Run below query against SCCM DB to verify corrupt entries:
SELECT * FROM
ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
Confirmed Bad policies entries in the SCCM database
Run below query to delete the bad policy after which we resolved the issue:
Delete FROM ResPolicyMap
WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)"

SCCM 2012 R2 Computer reports not displaying users and domain information for some systems.

I have a recently deployed SCCM 2012 R2 server which has been running well so far.
I have, however, noticed in the reporting (example: "Computers in a specific site" report) that some computers are not showing information like "User domain" and "User Name" (for about 500 of the 1500 computers).
If I go to a collection, select such a computer and right click to properties and go to the general tab I can see that the below fields are blank:
Last Logon User Domain
Last Logon User Name
All other fields are populated similarly for both affected and non-affected agents. Agent versions are the same as well. Hardware/Software inventory appears to be completing on all systems.
Has anyone else seen this type of behavior and found a solution? Appreciate any advice. Thanks.
Edit: Most agents have been installed for close to 2 months.
Hardware inventory: Daily
Software inventory: Weekly

Hi,
Those two values are populated by the Heartbeat agent and if no user is logged on when the heartbeat is sent, then the value is blank so I would say this would be as expected.
If you want to know which user has been using a computer you should have a look at the assett Intelliengence reports with console usage, then you can see who has been using a computer most frequently.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012 R2 Report Viewer not working.

I have recently upgraded to SCCM 2012 R2 and now when I go to the reports I get this message. Has anyone come across this?
The
DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an
error: The encryption type requested is not supported by the KDC.
(rsRuntimeErrorInExpression)

I found the solution.
http://www.netdavidic.com/2013/11/how-to-fix-sccm-2012-r2-reporting.html#!/2013/11/how-to-fix-sccm-2012-r2-reporting.html

SCCM 2012 application catalog items not showing up

I have an SCCM 2012 package which is being deployed to a device collection
The users are not seeing this package appear in the application catalog, nor is it appearing in the software centre
Can we no longer deploy (advertise) to device collections for the users to install when needed?

If it is not appearing in Software Center, then either the deployment policy has not been retrieved by the client, it is not in the target collection, or has been filtered out due to platform restrictions (or some other restriction like that). Or the client
is not able to communicate with the MP, which would be a cause of the first option (the policy has not been retrieved by the client). You'd need to check to ensure that all is working on that end.
Wally Mead

[SCCM 2012 SP1 W2K8R2] SUP not in Sync with WSUS settings (Language)

Hi All,
I have almost identical production and test SCCM environment.
After I setup SUP on both production and test environment SUP Language settings are not replicated to WSUS and cause WSUS/SCCM to Sync all languages.
SCCM 2012:
WSUS:
Any idea how to fix this?
Thank you in advance.
Regards,

Hi,
There is nothing to fix, it looks exactly the same in my environment. The updates are not downloaded using WSUS it is downloaded using either the SCCM console or the SCCM Primary Site server if you use and ADR and when you download the updates the settings
are beeing honoured.
So this is expected behaviour.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012: install individual patch, not visible in monitoring

Hi,
I was deploying a single Windows patch via SCCM 2012. Now this seems to work fine (I can see the deployment status) BUT I cannot see it in monitoring.
When I add the patch to a "Software Update Groups", I CAN see it in monitoring.
My question: what's the logic behind this? Why would I use an individual deployment if there is no monitoring built in. I'd need to know the KB then look into the software updates, select it and select the deployment status. Then also nobody sees that this
deployment exists since it doesn't appear anywhere else.
In other words fully useless(?)
Please advise.
J.
Jan Hoedt

Hi,
You can follow up a single update using a report or the Software Updates view on required/installed column but not under montioring,.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Sccm 2012 R2 - Windows 7 not listening on Port 80

Hello,
In looking through smsts.log and IIS logs I saw a lot of error communicating on Port 80. When tried to telnet from a pc to our sccm 2012 server using port 80, it goes through fine. But when I tried it the other way around, it fails. When
I ran netstat -an |find /i "listening" on my pc and others around me, I discover port 80 isn't listening. The firewall is off on both the pcs and sccm primary server. Port 80 isn't blocked on the network.
TCP     0.0.0.0:135            0.0.0.0:0              LISTENING
TCP     0.0.0.0:445            0.0.0.0:0              LISTENING
TCP     0.0.0.0:1025           0.0.0.0:0              LISTENING
TCP     0.0.0.0:1026           0.0.0.0:0              LISTENING
TCP     0.0.0.0:1027           0.0.0.0:0              LISTENING
TCP     0.0.0.0:1028           0.0.0.0:0              LISTENING
TCP     0.0.0.0:1036           0.0.0.0:0              LISTENING
TCP     0.0.0.0:1041           0.0.0.0:0              LISTENING
TCP     0.0.0.0:1057           0.0.0.0:0              LISTENING
TCP     0.0.0.0:3389           0.0.0.0:0              LISTENING
TCP     0.0.0.0:5357           0.0.0.0:0              LISTENING
TCP    127.0.0.1:5020          0.0.0.0:0              LISTENING
TCP     127.0.0.1:5354         0.0.0.0:0              LISTENING
TCP     127.0.0.1:27015        0.0.0.0:0              LISTENING
TCP     127.0.0.1:62522        0.0.0.0:0              LISTENING
TCP     172.24.94.131:139      0.0.0.0:0              LISTENING
TCP     172.24.102.23:139      0.0.0.0:0              LISTENING
TCP     [::]:135               [::]:0
LISTENING
TCP     [::]:445               [::]:0
LISTENING
TCP     [::]:1025              [::]:0
LISTENING
TCP     [::]:1026              [::]:0
LISTENING
TCP     [::]:1027              [::]:0
LISTENING
TCP     [::]:1028              [::]:0
LISTENING
TCP     [::]:1036              [::]:0
LISTENING
TCP     [::]:1042              [::]:0
LISTENING
TCP     [::]:1057              [::]:0
LISTENING
TCP     [::]:3389              [::]:0                 LISTENING
TCP     [::]:5357              [::]:0
LISTENING
I was told something has to initiate port 80 being open on win7. Is this true? If so, any idea why sccm isn't doing this? I could switch to port 8530 (have to do this for wsus too), but would think networking would have to open this port and then again,
would the pc listen for it?
PS, The sccm position before this one, dealt with Servers, that must have had port 80 listening.

After installing SCCM client via Task Sequence, and rebooting, the Self-signed certificate never comes down so the other Action items in Cinfiguration Manager Properties never come down. The only way I can get the Certificate to come down (seen in
MMC) is to give full permission (No one had rights initially) to rsa keys folder, delete smscfg.ini file and restart the sms host service. But if you go into configuration manager properties the client certificate is still shown as None. The locationServices.log
shows :failed to send management point list location request message to Primary Server/MP. If try
http://PrimaryServer it fails to connect from a pc. But if I try it from the primary server sccm01 it works fine. Port 80 is open on the network.
smsts shows:
Sending with winhttp Failed; 80072ee2 and also socket connect failed; 8007274c
Is there any other logs I can send you to help resolve this?
Again, Thanks so much for all of your help!!!
Mark

SCCM 2012 R2- Client push not working

Hi,
We have a SCCM 2012 R2 environment in our production. In one of the client machine i am unable to deploy client using Client push method. Below is the error in ccm.log
I am able to access admin$ share from sccm server. Please help!!
Regards
Pallavi

It means that it's trying to connect to the Admin$ share, but that it's failing because it's either unavailable or the account has no access.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012 R2 CU3 - Drivers Not Installing, Local Administrator Account Disabled

After PXE OSD for a Thick Image of Win 7 x64 Ent completes, several Task Sequence steps are not complete. Namely, 3 device drivers are missing (NIC, SM Bus and some other chipset driver), the built-in Administrator Account is disabled and it's not Domain
joined.
I have already re-created the thick WIM twice. It was built in a VMware VM then captured with SCCM Capture Media. The NIC is a Realtek and I have downloaded the most recent version of the drivers from HP's site and added them to a driver package which is
deployed. I even added several older drivers to my Boot Image and created to 2 steps to add drivers in the Task Sequence - one automatically installs the best drivers, the other installs a package with 7 NIC drivers. When I get the error during PXE OSD, I
press F8 and the machine has an IP address and the driver for the NIC appears to be correct. Upon rebooting, Windows completes setup but the Administrator Account is not enabled and the NIC driver is missing, etc.
Here is the portion of the log where errors begin to show up (from D:\SMSTSLog). Any help is GREATLY appreciated!!
!--------------------------------------------------------------------------------------------!   TSManager   11/18/2014 1:06:57 PM   872 (0x0368) Expand a string: WinPE   TSManager
11/18/2014 1:06:58 PM   872 (0x0368) Executing command line: OSDApplyOS.exe /data:XXXXX0001A,%OSDDataImageIndex%   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Command line for extension
.exe is "%1" %*   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) Set command line: "OSDApplyOS.exe" /data:XXXXX0001A,1   ApplyOperatingSystem   11/18/2014
1:06:58 PM   1040 (0x0410) Searching for next available volume:   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) Volume C:\ has already used.   ApplyOperatingSystem
11/18/2014 1:06:58 PM   1040 (0x0410) Volume D:\ has already used.   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) Volume E:\ is not a XXXXX hard drive.
ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) Volume X:\ is not a XXXXX hard drive.   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) it
!= volumes.end(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installcommon.cpp,519)   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) There are no more volumes available
for use.   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) GetNextAvailableVolume(allowFAT, volume), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installcommon.cpp,651)
ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) The requested target could not be resolved to a valid volume on this computer. Check your task sequence to ensure this drive is correct and that it is being
created The parameter is incorrect. (Error: 80070057; Source: Windows)   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) ResolveTarget( g_Target, g_InstallType == InstallType_DataImage, targetVolume
), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\applyos\applyos.cpp,483)   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) Process completed with exit code 2147500037
TSManager   11/18/2014 1:06:58 PM   872 (0x0368) !--------------------------------------------------------------------------------------------!   TSManager   11/18/2014 1:06:58 PM
872 (0x0368) Failed to run the action: Apply Data Image 1. Unspecified error (Error: 80004005; Source: Windows)   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) MP server http://XXXXSCCM12.XXXXX.XXXXX.
Ports 80,443. CRL=false.   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Setting authenticator   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Set authenticator
in transport   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Sending StatusMessage   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Setting message signatures.
TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Setting the authenticator.   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) CLibSMSMessageWinHttpTransport::Send: URL:
XXXXXSCCM12.XXXXX.XXXXX:80 CCM_POST /ccm_system/request   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Request was successful.   TSManager   11/18/2014 1:06:58 PM
872 (0x0368) Set a global environment variable _SMSTSLastActionRetCode=-2147467259   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Set a global environment variable _SMSTSLastActionSucceeded=false
TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Clear XXXXX default environment   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Let the parent group (Install Operating
System) decides whether to continue execution   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) The execution of the group (Install Operating System) has failed and the execution has been aborted. An action
failed. Operation aborted (Error: 80004004; Source: Windows)   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Failed to run the last action: Apply Data Image 1. Execution of task sequence failed. Unspecified
error (Error: 80004005; Source: Windows)   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) MP server http://XXXXXSCCM12.XXXXX.XXXXX. Ports 80,443. CRL=false.   TSManager   11/18/2014
1:06:58 PM   872 (0x0368) Setting authenticator   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Set authenticator in transport   TSManager   11/18/2014 1:06:58
PM   872 (0x0368) Sending StatusMessage   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Setting message signatures.   TSManager   11/18/2014 1:06:58 PM
872 (0x0368) Setting the authenticator.   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) CLibSMSMessageWinHttpTransport::Send: URL: XXXXXSCCM12.XXXXX.XXXXX:80 CCM_POST /ccm_system/request
TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Request was successful.   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Executing command line: X:\WINDOWS\system32\cmd.exe
/k   TSBootShell   11/18/2014 1:07:38 PM   764 (0x02FC) The command completed successfully.   TSBootShell   11/18/2014 1:07:38 PM   764 (0x02FC) Successfully launched
command shell.   TSBootShell   11/18/2014 1:07:38 PM   764 (0x02FC) Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,923)
TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Task Sequence Engine failed! Code: enExecutionFail   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) ****************************************************************************
TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Task sequence execution failed with error code 80004005   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Cleaning Up.
TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Removing Authenticator   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) shKey.DeleteValue( c_szRegValue_SecurityToken ),
HRESULT=80070002 (e:\nts_sccm_release\sms\framework\ccmutillib\ccmutillib.cpp,1660)   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Cleaning up task sequence folder   TSManager
11/18/2014 1:07:43 PM   872 (0x0368) Unable to delete file D:\_SMSTaskSequence\TSEnv.dat (0x80070005). Continuing.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) hr, HRESULT=80070091
(e:\nts_sccm_release\sms\framework\core\ccmcore\ccmfile.cpp,1218)   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Failed to delete directory 'D:\_SMSTaskSequence'   TSManager   11/18/2014
1:07:43 PM   872 (0x0368) (dwRet = ::SetNamedSecurityInfoW ((WCHAR*) pszObjectName, objectType, OWNER_SECURITY_INFORMATION, pOwnerSID, NULL, NULL, NULL)) == ERROR_SUCCESS, HRESULT=80070005 (e:\qfe\nts\sms\framework\tscore\utils.cpp,6675)
TSManager   11/18/2014 1:07:43 PM   872 (0x0368) SetNamedSecurityInfo() failed.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) SetObjectOwner() failed. 0x80070005.
TSManager   11/18/2014 1:07:43 PM   872 (0x0368) SetObjectOwner (szFName, SE_FILE_OBJECT, c_szAdministrators), HRESULT=80070005 (e:\qfe\nts\sms\framework\tscore\utils.cpp,6772)   TSManager   11/18/2014
1:07:43 PM   872 (0x0368) RemoveFile() failed for D:\_SMSTaskSequence\TSEnv.dat. 0x80070005.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) RemoveDirectoryW failed (0x80070091) for D:\_SMSTaskSequence
TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ...   TSManager   11/18/2014 1:07:43 PM   872
(0x0368) DeleteFileW(sVolumeIDFile.c_str()), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,508)   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Deleting volume ID file D:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca
...   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) DeleteFileW(sVolumeIDFile.c_str()), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,508)   TSManager   11/18/2014
1:07:43 PM   872 (0x0368) Successfully unregistered Task Sequencing Environment COM Interface.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Command line for extension .exe is "%1"
%*   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Set command line: "X:\sms\bin\x64\TsProgressUI.exe" /Unregister   TSManager   11/18/2014 1:07:43 PM
872 (0x0368) Executing command line: "X:\sms\bin\x64\TsProgressUI.exe" /Unregister   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) ==========[ TsProgressUI started in process 1980 ]==========
TsProgressUI   11/18/2014 1:07:43 PM   624 (0x0270) Command line: "X:\sms\bin\x64\TsProgressUI.exe" /Unregister   TsProgressUI   11/18/2014 1:07:43 PM   624 (0x0270)
Unregistering COM classes   TsProgressUI   11/18/2014 1:07:43 PM   624 (0x0270) Unregistering class objects   TsProgressUI   11/18/2014 1:07:43 PM   624 (0x0270)
Shutdown complete.   TsProgressUI   11/18/2014 1:07:43 PM   624 (0x0270) Process completed with exit code 0   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Successfully
unregistered TS Progress UI.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) g_TSManager.Run(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,766)   TSManager
11/18/2014 1:07:43 PM   872 (0x0368) ::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,811)   TSManager   11/18/2014 1:07:43
PM   872 (0x0368) RegQueryValueExW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) GetTsRegValue() is unsuccessful.
0x80070002.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) End program:    TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Error Task Sequence Manager failed
to execute task sequence. Code 0x80004005   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Sending error status message   TSManager   11/18/2014 1:07:43 PM   872
(0x0368) MP server http://XXXXXSCCM12.XXXXX.XXXXX. Ports 80,443. CRL=false.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Setting authenticator   TSManager   11/18/2014 1:07:43
PM   872 (0x0368) Set authenticator in transport   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Sending StatusMessage   TSManager   11/18/2014 1:07:43 PM
872 (0x0368) Setting message signatures.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Setting the authenticator.   TSManager   11/18/2014 1:07:43 PM   872
(0x0368) CLibSMSMessageWinHttpTransport::Send: URL: XXXXXSCCM12.XXXXX.XXXXX:80 CCM_POST /ccm_system/request   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Request was successful.   TSManager
11/18/2014 1:07:43 PM   872 (0x0368) Finalize logging request ignored from process 804   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Process completed with exit code 2147500037
TSPxe   11/18/2014 1:07:43 PM   864 (0x0360) Task Sequence Manager returned code 0x80004005   TSPxe   11/18/2014 1:07:43 PM   864 (0x0360) ThreadToResolveAndExecuteTaskSequence
returned code 0x00000000   TSPxe   11/18/2014 1:07:43 PM   844 (0x034C) ResolveProgressPage::OnWizardNext()   TSPxe   11/18/2014 1:07:43 PM   844 (0x034C) Activating
Finish Page.   TSPxe   11/18/2014 1:07:43 PM   844 (0x034C) Exiting with return code 0x00000000   TSPxe   11/18/2014 1:07:43 PM   844 (0x034C) Execution complete.
TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) hMap != 0, HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentscope.cpp,493)   TSBootShell   11/18/2014 1:07:43 PM
768 (0x0300) m_pGlobalScope->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,335)   TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) this->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,553)
TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) ::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,811)   TSBootShell
11/18/2014 1:07:43 PM   768 (0x0300) RegQueryValueExW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram   TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) GetTsRegValue()
is unsuccessful. 0x80070002.   TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) End program:    TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) Finalizing
logging from process 760   TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) Finalizing logs to root of first available drive   TSBootShell   11/18/2014 1:07:43 PM
768 (0x0300) Successfully finalized logs to D:\SMSTSLog   TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) Cleaning up task sequencing logging configuration.   TSBootShell
11/18/2014 1:07:43 PM   768 (0x0300)

Thank you for the reply, you're right the problem is with an image being applied, but not the OS image.
The issue is that for some reason, there were 2 images captured and SCCM automatically created a step for both. Image 2-2 is the valid Windows image, but image 1-1 clearly has some issues. I disabled the that step in the Task Sequence and it installed drivers
and completed the rest of the Task Sequence!

SCCM 2012 R2 CAS or not CAS

Similar Messages

Maybe you are looking for