SCCM 2012 R2 configure WSUS got error remote SQL Server 2012

Hi All,
I got question ask on when i want to configure the WSUS component it failed as per screenshot and my SCCM cant work with it.
SCCM Server : Windows Server 2012 R2 (WSUS featured installed)
SCCM Version: System Center Config Manager R2
Remote SQL Server : Windows Server 2012 R2
SQL Version: SQL Server 2012 SP1 -11.0.3153
WSUS Error:
SCCM Error:
Hope you all can provide me a good solution on it I had no clue on this.
Regards,
Sam

Sam,
Recommend you
Remove SUP
Remove WSUS role
Delete the SUSDB on the remote SQL server
Reboot the server
Reinstall WSUS feature
Reinstall SUP
Take a look at my blog on installing a SUP on 2012 from the section 'Install WSUS on the remote SUP server'
http://sccmentor.wordpress.com/2014/09/11/installing-a-remote-sup-in-sccm-2012-r2-on-windows-server-2012-r2/
Make sure you run the Post Install tasks as well.
Cheers
Paul | sccmentor.wordpress.com

Similar Messages

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

SQL Server 2012 unable to update cumulative update for sql server 2012

Here is the version
Microsoft SQL server 2012 11.02.2100.60X64
Trying to install the update to install sccm2012
Error
There are no SQL server instance or shared feature that can be update on this computer.

Hello,
You need CU2 for SQL Server 2012 RTM or later to be able to install SSCM 2012. You can install SP1 for SQL Server 2012 too.
CU2 can be downloaded from the following link:
http://support.microsoft.com/kb/2703275/en-us
When you click on the “Hotfix Download Available” button, make sure you make a click on the “"Show hotfixes for all platforms and languages
(8) " link, then download and install the following file:
SQLServer2012_RTM_CU2_2703275_11_0_2325_x64
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

When installing DPM2012 R2 to a remote SQL Server 2012 R2 Sp1 produces an error 832

Sorry for bad english
Good afternoon trying to overcome the installation error 832
There are two virtual servers on ESXI
1. DPM on it trying to install itself DPM
2. SQL it should be a database DPM
SQL virtual machine on the net it was added component NetFW 3.5 put SQL Server 2012 SP1 EN-en. In the first plug SQL Data Base, Report Services, SQL Management studio from all services are running under a domain administrator
When you install SQL selected Server Collation "SQL_Latin1_General_CP1_Cl_AS"
Both hosts have Windows Server 2012 R2 En-en
DPM virtual machine clean, installed on it NetFW 3.5 and the component SQL Management studio, when you install DPM SQL Server validation errors not issued, at the end of the installation gives an error 832
Windows Server 2012 R2, SQL Server 2012 Sp1, DPM 2012 R2, all downloaded from a site microsoft
Visited rearrange SQL, rearrange Windows, put Ru-ru and En-en
Went to run the SQL from under Local system and other domain account
Where then subtracted that you want to create a domain / local recording Microsoft$DPM$ACC and run from under her service
did not help.
The only thing that bothers me more is that the domain name is XXX.YYY.local here where you need to read that domain would look like XXX.local but not sure that's true

Hi
Can you post the log file so we can see the error in more detail?

Update error of SQL Server 2012 enterprise running on Windows server 2008 standard SP2 (32 bits)

Hi there;
I have a windows server 2008 SP2 (32bits) in which I have an instance of SQL Server
2008 and another of 2012.
My Windows server 2008 installed the following updates; (see below).
(KB2898858),(KB2909921),(KB890830),(KB2898869),(KB2911502),(KB2901126),
(KB2916036),(KB2862973),(KB2901113)
After the machine was re-started, I was not abble to connect
to the instance of SQL Server 2012. I am able
to connect to the instance of SQL Server 2008.
The error message I get when I atemp to connect can be found
at the end of the list of updates below.
Do I need to uninstall an update? if so, which one and how do I do that?
Thanks Gabriel I. Ruiz
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2898858)
Installation date: ‎2/‎12/‎2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898858
Cumulative Security Update for Internet Explorer 9 for Windows Server 2008 (KB2909921)
Installation date: ‎2/‎12/‎2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2909921
Windows Malicious Software Removal Tool - February 2014 (KB890830)
Installation date: ‎2/‎12/‎2014 11:41 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/890830
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista and Windows Server 2008 x86 (KB2898869)
Installation date: ‎2/‎12/‎2014 11:40 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898869
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2911502)
Installation date: ‎2/‎12/‎2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2911502
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista, and Windows Server 2008 x86 (KB2901126)
Installation date: ‎2/‎12/‎2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901126
Security Update for Windows Server 2008 (KB2916036)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2916036
Security Update for Windows Server 2008 (KB2862973)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2862973
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2901113)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901113
===================================
Cannot connect to HAVANA\HAVANA_2012_1ST.
===================================
The client was unable to establish a connection because of an error during connection initialization process before login. Possible causes include the following: the client tried to connect to an unsupported version of SQL Server; the server was too busy
to accept new connections; or there was a resource limitation (insufficient memory or maximum allowed connections) on the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
Server Name: HAVANA\HAVANA_2012_1ST
Error Number: 233
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock)
at System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate)
at System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate)
at System.Data.SqlClient.TdsParser.SendPreLoginHandshake(Byte[] instanceName, Boolean encrypt)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
No process is on the other end of the pipe

Hi,
Check if SQL Server service is running fine. I doubt you may have changed the user account password used for SQL Server service. After restarting the machine, you also need to update the user account of SQL Server service in Configuration
Manager. Re-type the user account name and password under Log on tab and see how it helps.
Thanks.
Tracy Cai
TechNet Community Support

Excel 2007 Download Error from SQL Server 2012

Thank you for your help/comments in advance
We are running SQL Server 2012, downloading SSRS reports into Excel 2007.
The report renders to the monitor just fine.
Most downloads are fine but we get an error with the largest downloads (common denominator) but can be hit or miss. Usually a second try it will download. Today we tried numerous times and kept getting the error.
I saw a link to a service pack fix ...https://msdn.microsoft.com/en-us/library/dd255234(v=sql.110).aspx which somewhat fits my issue.
The Report Server Log (O:\MSRS11.MSSQLSERVER\Reporting Services\LogFiles\ReportServerService__04_01_2015.log) gives the following error message:
library!ReportServer_0-2!29bc!04/01/2015-15:02:01:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: Invalid offset for item. ReferenceID: fffffffffffffffe, Offset: -2, Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException:
An internal error occurred on the report server. See the error log for more details.;
library!ReportServer_0-2!29bc!04/01/2015-15:02:12:: i INFO: Dump result: External dump process return code 0x20000001.
External dump process returned no errors.
processing!ReportServer_0-2!29bc!04/01/2015-15:02:12:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException:
An internal error occurred on the report server. See the error log for more details.;
library!ReportServer_0-2!29bc!04/01/2015-15:02:12:: w WARN: Microsoft.ReportingServices.Diagnostics.Utilities.RSException: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See
the error log for more details. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for
more details.
   at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.RegisterRuntimeErrorInExpression(VariantResult& result, Exception e, IErrorContext iErrorContext, Boolean isError)
   at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.EvaluateTextRunValueExpression(TextRun textRun)
   at Microsoft.ReportingServices.ReportProcessing.OnDemandReportObjectModel.TextRunImpl.GetResult(IReportScopeInstance romInstance)
   at Microsoft.ReportingServices.OnDemandReportRendering.InternalTextRunInstance.EvaluateOriginalValue()
   at Microsoft.ReportingServices.OnDemandReportRendering.InternalTextRunInstance.get_ProcessedWithError()
   at Microsoft.ReportingServices.Rendering.SPBProcessing.TextBox.WriteCustomNonSharedItemProps(RPLElementProps nonSharedProps, RPLWriter rplWriter, PageContext pageContext)
   at Microsoft.ReportingServices.Rendering.SPBProcessing.PageItem.WriteNonSharedItemProps(RPLElementProps elemProps, RPLWriter rplWriter, PageContext pageContext)
   at Microsoft.ReportingServices.Rendering.SPBProcessing.TextBox.WriteItemToStream(RPLWriter rplWriter, PageContext pageContext)
   at Microsoft.ReportingServices.Rendering.SPBProcessing.TextBox.CalculatePage(RPLWriter rplWriter, PageItemHelper lastPageInfo, PageContext pageContext, PageItem[] siblings, RepeatWithItem[] repeatWithItems, Double parentTopInPage, Double&
parentPageHeight, Interactivity interactivity)
   at Microsoft.ReportingServices.Rendering.SPBProcessing.Rectangle.CalculatePage(RPLWriter rplWriter, PageItemHelper lastPageInfo, PageContext pageContext, PageItem[] siblings, RepeatWithItem[] repeatWithItems, Double parentTopInPage, Double&
parentPageHeight, Interactivity interactivity)
   at Microsoft.ReportingServices.Rendering.SPBProcessing.Tablix.TablixContext.AddRowMemberContent(TablixMember rowMember, Int32 rowIndex, Int32 colIndex, Int32 rowSpan, Int32 colSpan, Byte memberState, Int32 defTreeLevel, LevelInfo childLevelInfo,
Double updateWidth)
   at Microsoft.ReportingServices.Rendering.SPBProcessing.Tablix.TablixContext.AddRowMember(TablixMember rowMember, Int32 rowIndex, Int32 colIndex, Int32 rowSpan, Int32 colSpan, Byte memberState, Int32 defTreeLevel, LevelInfo childLevelInfo)
   at Microsoft.ReportingServices.Rendering.SPBProcessing.Tablix.CreateRowMemberChildren(Tablix tablix, TablixMember rowMemberParent, InnerToggleState parentToggleState, Int32 defTreeLevel, Boolean parentBorderHeader, Int32 parentRowIndex,
Int32 parentColIndex, Int32 level, TablixContext context, Boolean& advanceRow, LevelInfo& parentLevelInfo, List`1& ignoreTotals, Boolean keepTogether)
   at Microsoft.ReportingServices.Rendering.SPBProcessing.Tablix.CreateTablixItems(Tablix tablix, TablixContext context)
   at Microsoft.ReportingServices.Rendering.SPBProcessing.Tablix.CalculatePage(RPLWriter rplWriter, PageItemHelper lastPageInfo, PageContext pageContext, PageItem[] siblings, RepeatWithItem[] repeatWithItems, Double parentTopInPage, Double&
parentPageHeight, Interactivity interactivity)
   at Microsoft.ReportingServices.Rendering.SPBProcessing.ReportBody.CalculatePage(RPLWriter rplWriter, PageItemHelper lastPageInfo, PageContext pageContext, PageItem[] siblings, RepeatWithItem[] repeatWithItems, Double parentTopInPage, Double&
parentPageHeight, Interactivity interactivity)
   at Microsoft.ReportingServices.Rendering.SPBProcessing.ReportSection.CalculatePage(RPLWriter rplWriter, Int32 page, Int32 totalPages, Int32 regionPageNumber, Int32 regionTotalPages, Boolean firstSectionOnPage, Boolean lastSection, Interactivity
interactivity, Double heightToBeUsed, PageItemHelper& lastBodyInfo, Boolean& delayedHeader, Boolean& delayedFooter, Boolean& lastSectionOnPage)
   at Microsoft.ReportingServices.Rendering.SPBProcessing.Report.NextPage(RPLWriter rplWriter, ReportSectionHelper& lastPageInfo, Int32 page, Int32 totalPages, Interactivity interactivity, Boolean hasPaginationChunk)
   at Microsoft.ReportingServices.Rendering.SPBProcessing.SPBProcessing.GetReportNextPage(Stream& stream, Boolean collectPageBookmarks)
   at Microsoft.ReportingServices.Rendering.SPBProcessing.SPBProcessing.GetNextPage(RPLReport& rplReport, Boolean collectPageBookmarks)
   at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, Hashtable& renderProperties,
CreateAndRegisterStream createAndRegisterStream)
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.HandleRenderingException(ReportRenderingException rex)
   at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReport.Execute(IRenderingExtension newRenderer)
   at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(RenderingContext rc, ProcessingContext pc)
   at Microsoft.ReportingServices.Library.RenderFromSnapshot.DoRendering(ProcessingContext pc, RenderingContext rc)
   at Microsoft.ReportingServices.Library.RenderFromSnapshot.CallProcessingAndRendering(ProcessingContext pc, RenderingContext rc, OnDemandProcessingResult& result)
   at Microsoft.ReportingServices.Library.RenderStrategyBase.ExecuteStrategy(OnDemandProcessingResult& processingResult)
The user sees the following on her monitor when downloading ...

Hi Mark,
As you know this is an known issue in the SSRS 2012 and the fix for this issue was first released in Cumulative Update 3 for SQL Server 2012. For more information about this cumulative update package, click the following article number to view the article
in the Microsoft Knowledge Base:
2723749Cumulative update package 3 for SQL Server 2012
More details information in below article:
http://support.microsoft.com/en-us/kb/2707015
As I have tested on my loacal environment and can't reproduce the issue and you have also mentioned that that you didn't meet the issue now. If you got the issue next time, please feel free to let us know if the hotfix will work or not.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Error Installing SQL SERVER 2012 Express

Hello Everyone, i have this problem:
When i try to install SQL SERVER Express 2012 on Windows 7 Ultimate 64b, appears the error "Can't fin registry key (MSDTC)", i try to follow the instructions of other forums, but the file "msdtc.exe" not found in the computer.
Then i try to copy from other computer but only i have Windows 8, and doesn't Work (The copy).
Also I install SQL Server 2012, but the services doesn't start, I think it's for the same error, then I uninstall the SQL server Again.
I search in the net, but nobody reports the file "msdtc.exe" not exits in the OS, then I think, Ii have the unique computer that don't have the file????
Please somebody answer my question, where i could find the file msdtc.exe for download?, this file will fix the problem?
Sorry for my english.
Thank you all.

Could you please check if you have any service call "Distributed Transaction Coordinator" in services.msc
similar issue:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/77f3fd5b-9290-4455-bf8c-0abd58166f91/msdtc-on-windows-7?forum=sqldatabaseengine

Error Installing SQL Server 2012 Express LocalDB on Windows 8.1 64-bit

TriSys Business Software

Hello,
Did you install .NET Framework 4.0 or enable .NET Framework 3.5 SP1 on Windows 8.1 which is requirement for SQL Server 2012?
SQL Server installs .NET 4.0 during the feature installation step. But if you are installing the SQL Server Express editions, ensure that an Internet connection is available on the computer. SQL Server Setup downloads and installs the .NET Framework 4
because it is not included in the SQL Server Express media.
In you case, please try to download and install
.NET Framework 4.0 or
.NET Framework 3.5 SP1 and then run the SQL Server setup.exe again.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SQL Server 2012 Cumulative update package 2 (CU2) for SQL Server 2012 Service Pack 2 - why only for x86 ?

Hey guys...
Im a little bit confused... i wanted to download the newest hotfixes for SQL server 2012...
But the download for :
2983175 Cumulative update package 2 (CU2) for SQL Server 2012 Service Pack
is only for the platform: x86 available ... but my SQL server 2012 is running in a x64 environment...
(when i checked the older cumulative updates... they're all only for x86.. can someone tell me why ? )
thanks and regards,
Dominic

There doesn't exist an SQL Express "Standard". It's two different editions.
For Express there are three 32bit/64bit editions:
Express, Express with Tools and Express with Advanced Services.
Express with Tools is essentially Express with Management Studio Tools, Express with Advanced Services adds also BI (Business Intelligence) + Reporting Services.
As for where you can apply the cumulative update, on the link you can see this:
Microsoft SQL Server 2012 Service Pack 2, when used with:
Microsoft SQL Server 2012 Analysis Services
Microsoft SQL Server 2012 Developer
Microsoft SQL Server 2012 Enterprise
Microsoft SQL Server 2012 Express
Microsoft SQL Server 2012 Business Intelligence
Microsoft SQL Server 2012 Standard
Microsoft SQL Server 2012 Web
"If there's nothing wrong with me, maybe there's something wrong with the universe!"

Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIA

Hi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome.

Cannot connect to SERVER. Login failed for user 'DOMAIN\user'. (Microsoft SQL Server, Error 18456) - SQL Server 2012 on Windows Server 2008 R2

I've seen multiple blogs and forums with similar problems and SQL 2012 or 2008. But no solutions that work for me.
I have installed SQL Server in mixed mode (SQL and Windows authentication). I can create new Login accounts in either mode. However, I cannot get an AD security group Login account to work. I am trying to add group 'DOMAIN\Domain Admins' or 'SERVER\Administrators'
as a Login so that any of the domain's administrator accounts can open SQL Server Management Studio and act as an 'sa' account on this server.
I have deleted the SQL account 'DOMAIN\Domain Admins'.
I have restarted SQL.
I have restarted the Win2K8r2 server.
I have launched SSMS as Administrator from the desktop of SERVER.
I have launched SSMS as another user (and used 'DOMAIN\user' to lauch it) from the desktop of SERVER.
I can create a login account named 'DOMAIN\user' (who happens to be a member of the 'DOMAIN\Domain Admins' group) and give this account 'sa' security, and when I do that, this account works as expected...
How do I add a security group as a Login account and give all members of that group the ability to be an 'sa' account?

Hi geoperkins,
Are you getting the following error message?
Error: 18456, Severity: 14, State: 11
Login failed for user <Domain\user>. Reason: Token-based server access validation failed with an infrastructure error.
If that is the case, the issue could be due to that the Windows login has no profile or that permissions could not be checked due to UAC. Please disable UAC firstly and check if it is successful to log in SQL Server.
Another reason could be that the domain controller could not be reached. You may need to resort to re-creating the login. Create a new group in AD, add users to the new group, then add the group to the local admin group and create login for the group in SQL
Server.
There is a connect item describing similar issue for your reference.
https://connect.microsoft.com/SQLServer/feedback/details/680705/cant-login-to-sql-using-windows-authentication-when-user-is-in-a-domain-security-group
For more details about above error, please review the following blog.
http://sqlblogcasts.com/blogs/simons/archive/2011/02/01/solution-login-failed-for-user-x-reason-token-based-server-access-validation-failed-and-error-18456.aspx
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

SCCM 2012 SP1 with remote WSUS on Server 2012 and SQL Server 2012

I am rebuilding my SCCM 2012 lab on Server 2012 R2 x64 OS now.
I have 1 primary site, remote SQL server 2012, and remote WSUS server.
Is the WSUS console still required on my primary site running server 2012? If so are the below the correct steps to get this working?
Install Console on primary server:
Go to Server Manager à Add Roles and features, Navigate to the features section.
Remote Server Manager tools
>Role Administration Tools
--Select Windows Server Update Services Tools Only
Are there any post hotfixes to install?
Intalling WSUS full version on remote server:
Go to Server Manager à Add Roles and features, Server Roles section.
Windows Server Update Services
Do I need to select this as well on the remote wsus server? >Role Administration Tools -Select Windows Server Update Services Tools Only
Since my SQL server is on a remote server do I select the below only?
Are there any post hotfixes to install?

Hi,
One Part of the question is already answered. The second part is: If you want to use a remote SQL Server you need to select exactly what you selected in your screenshot.
Regards,
Thomas
Thomas Hanrath [MCT | Regional Lead Germany] |
http://www.hanrath.de
Microsoft Learning Blog |
http://blog.microsoftlearning.de

Error while installing SQL Server 2012 X64 SP2,

Error while installing SQL Server 2012 X64 SP2,
When I installed the SQL Server 2012 X64 SP1, I got the attached error.
What might be the issue here?
Thank you
Best
Jamal

Hello,
Are you trying to install SQL Server on a compressed or encrypted drive? SQL Server won’t install on a drive/folder with these attributes.
Are you trying to install SQL Server on a ReFS file system? It is not supported on SQL Server 2012.
Disable any security/antivirus software and download the media again. Mount the media (.ISO file) and try to install again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SQL Server 2012 - applying SP2 breaks SSRS Report Builder

Hi,
Had SQL 2012 (was 11.00.2845) and SSRS configured and working.
Applied SQL 2012 SP2 (server now at version 11.0.5058.0 (X64).
But when I goto the typical "http://server/ReportS_INST1 - reports still work ok, but clicking on Report Builder looks like it starts the download and then errors.
The error is "Application validation did not succeed. Unable to continue.".
Clicking on Details gets the message below. I understand it thinks it has a version mismatch, but anyone know what the resolution should be?
Thanks
Matt
--------------------error details
PLATFORM VERSION INFO
Windows : 6.1.7601.65536 (Win32NT)
Common Language Runtime
: 4.0.30319.18444
System.Deployment.dll
: 4.0.30319.18408 built by: FX451RTMGREL
clr.dll : 4.0.30319.18444 built by: FX451RTMGDR
dfdll.dll : 4.0.30319.18408 built by: FX451RTMGREL
dfshim.dll : 4.0.41209.0 (Main.041209-0000)
SOURCES
Deployment url
: http://server/ReportServer_INST1/ReportBuilder/ReportBuilder_3_0_0_0.application
Server
: Microsoft-HTTPAPI/2.0
X-AspNet-Version: 2.0.50727
Application url
: http://server/ReportServer_INST1/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
Server
: Microsoft-HTTPAPI/2.0
X-AspNet-Version: 2.0.50727
IDENTITIES
Deployment Identity
: ReportBuilder_3_0_0_0.application, Version=11.0.5058.0, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
Application Identity
: MSReportBuilder.exe, Version=11.0.5058.0, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://server/ReportServer_INST1/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
+ File, Microsoft.Data.ConnectionUI.dll, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [8/11/2014 3:00:48 PM] : Activation of http://server/ReportServer_INST1/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
* [8/11/2014 3:00:48 PM] : Processing of deployment manifest has successfully completed.
* [8/11/2014 3:00:48 PM] : Installation of the application has started.
* [8/11/2014 3:00:49 PM] : Processing of application manifest has successfully completed.
* [8/11/2014 3:00:49 PM] : Found compatible runtime version 4.0.30319.
* [8/11/2014 3:00:49 PM] : Request of trust and detection of platform is complete.
ERROR DETAILS
Following errors were detected during this operation.
* [8/11/2014 3:00:55 PM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.Data.ConnectionUI.dll, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
at System.Deployment.Application.ComponentVerifier.VerifyComponents()
at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String&
errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
--------------------error details end

Hello,
It seems to me somebody applied SP2 for SQL Server 2012 on an instance that has installed SQL Server 2012 SP1 CTP 4. CTP4 is not
the final version of SP1.
http://sqlserverbuilds.blogspot.com/
My suggestion is to uninstall SP2 (using Control Panel), download and apply SP1 from the following link, and then apply SP2 again.
http://www.microsoft.com/en-us/download/details.aspx?id=35575
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Run Reporting services 2005 with databases housed on SQL Server 2012?

Hi, I have a RS 2005 install in which the ReportServer and ReportServerTempDB databases reside on a different SQL Server 2005 server. I am planning to upgrade DB server to 2012 and would like to keep SSRS as 2005.As a second phase I will upgrade SSRS2005
to SSRS 2008. So I would be running something like this:
Server A: SQL 2005 Reporting Services
Server B: SQL 2012 database engine - housing ReportServer and ReportServerTempDB
Is this configuration supported?

Hello,
According to the
BOL, Report Server service checks the database version at startup. If the report server is connected to a database that is an earlier version, the report server will update the database during startup.If you have a newer report server database, you
cannot use it with an earlier version of a report server instances.
In that case, the earlier versions of SQL Server Database Engine that can be used to host the SSRS report server databases. For example, In SQL Server 2005 Reporting Services, we can use either SQL Server 2000 or SQL Server 2005 to host the databases, for
SSRS 2012, we can use SQL Server 2012,2008 R2,2008,2005.
Based on my test, In the Reporting Services 2005 Configure Manager, we can create a new database on a remote SQL Server 2012 database engine and the Initialization is successful.
In this way, the databases are created from the script file which installed with the Reporting Services instance, you can find the Catalog.sql and CatalogTempDB.sql under folder C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\ReportServer.
However, when upgrade the existing ReportServer database and ReportServerTempDB database on the SQL Server 2012 by restore from a backup, we cannot use this existing database for Reporting Services 2005 and get the following message:
The database version (162) does not match your reporting serivces installation.And the initialization failed.
In your case, you can host the ReportServer database and ReportServerTempDB database of SSRS 2005 on SQL Server 2012 database enginer by create a new database from Reporting Services 2005 Configure Manager. But you cannot use the existing
database which upgrade to SQL Server 2012.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

SCCM 2012 R2 configure WSUS got error remote SQL Server 2012

Similar Messages

Maybe you are looking for