SCCM 2012 R2 -CU3 fails at 'Create Software Update Catalog'

Hi
I am trying to upgrade SCCM 2012 R2 CU1 to CU3 (skipping CU2) but the upgrade fails in the middle with following message in the log
Task 'Create Software Update Catalog' completed, state is 'failed' ExceptionText: Error: Setup detected an unexpected problem during installation. Error message: A valid file name is required.
Parameter name: fileName
I have checked following article but it does not fixed mine.
https://social.technet.microsoft.com/Forums/en-US/05ddea79-ca6c-4958-bd54-ceac4b787dd9/problem-installing-sccm-2012-r2-hotfix-kb2905002-wdsosd-slowness-issue?forum=configmanagerosd
Already uninstalled CU3 and reinstalled it with no luck so I was wondering anyone has any ideas as what might be causing it?
Thanks

** RESOLVED **
After attempting several times and uninstalling when it failed, finally it got installed successfully.
Since I was skipping CU2 so I thought to install that as well before installing CU3. However, the CU2 also failed at Admin Console update. Re started installing CU3 but this time I choose not to create deployment packages for client, server and console.
Not sure if that fixed it or CU2 but I am glad its over now. After installing CU3 successfully, ran the installer again to create all required deployment packages for console, client and server.
All looks good now.

Similar Messages

SCCM 2012 Client Error Failed to create registration request body. Error: 0x80070057

Hi,
While installing sccm 2012 R2 Client on server 2008 R2 ClientManagerStartup.log shows below error
Failed to create registration request body. Error: 0x80070057
Kiran

Torsten is right, please post the entire ccmsetup.log and client.msi.log.
Daniel Ratliff | http://www.PotentEngineer.com

New SCCM 2012 client machines still getting SCCM 2012 SP1 client not the new SCCM 2012 SP1 CU3 client

Hi,
I've successfully (as far as I can tell) deployed SCCM 2012 SP1 CU3 and all my existing clients are showing a client version of 5.00.7804.1400. But when I setup a new client system recently I noticed that the client version was showing 5.00.7804.1000,
and not 5.00.7804.1400.
For new client systems, do I need to redeploy the packages that were created for SCCM 2012 SP1 CU3 so that the new systems get the new SCCM 2012 SP1 CU3 client?
Thanks,
Nick

Hi,
Here's some good information to look over:
http://sccmfaq.wordpress.com/2013/09/24/sccm-2012-include-cu-in-osd/
I haven't followed these instructions myself, since I haven't really had any good reason to include CUs during the initial installation process. I use this method instead and I've never run into any problems:
http://www.ronnipedersen.com/2013/06/installing-sccm-2012-sp1-cu2-quick-start-guide/
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

SCCM 2012 R2 CU3 UPGRADE BROKE REMOTE ADMIN CONSOLE CONNECTIVITY

I installed SCCM 2012 R2 CU3 on my site server but it broke a couple things. I've never had problems with SCCM upgrades before. The admin console works if you log into the site server and run it from there but not when you try it from anywhere else (another
server or a workstation). When you open the admin console on the site server it does have the new version of 5.00.7958.1401. Of the five suggestions that appear when your console won't connect, here's what I know:
1) the remote machines can all ping the site server (call it server 01)
2) we know it's not my account that's a problem as I can open the console on the site server itself
3) This problem happens on server 02, which I put the new admin console on. It also happens with other machines which still have the CU2 console
4) Yes, I'm an admin role, shown by logging into the console on the site server
5) I have another network where everything works. I have not put CU3 on it yet, of course. The WMI permissions on Root, Root\SMS, and Root\SMS\site_ABC are identical on both site servers yet it works on non-upgraded one and not on the upgraded one.
WMI info-I can WMI connect from the site server to these other machines but not WMI connect from the other machines to the site server: not root, SMS, or SMS\site_ABC, nor cimv2, even though the permissions match what is on the working network.
When I launch the console from the site server entries about loading the console loading ok are in SMSAdminUI.log, but when I try to launch the console from other machines no entries are made, even though I changed the SmsAdminSNapIN value to VERBOSE.
I checked DCOM permissions and they are the same on both networks.
Another issue that appeared with this upgrade: I can install the client upgrade to CU3 on other machines but on the site server it fails with "Internal Error 2503" and when you click OK it you get "Internal Error 2502".
Ben JohnsonWY

I'd suspected this WMI problem was only affecting our Server 2012 boxes. I compared RSOPs and noticed the ones having this problem were all under the same OU and getting few GPOs. Our GPO person found a GPO that has somehow become unlinked. He relinked
it. After a gpo update AND a reboot these machines start working again. So CU3 did not cause this WMI after all.
And yes, the CU2 consoles won't connect to a CU3 site server, you have to run the console upgrade.
I fixed the "internal error 2503/2502" by doing this: open task manager, click details, end the explorer task (screen will look blank at first). Click File and select "start new task", enter "explorer.exe' and click the run as admin
button. The msp for CU3 client installed and the screen looks normal again. I only saw this error on the site server and have never seen it before.
Ben JohnsonWY

SCCM 2012 R2 CU3 PXE issue

Hi,
I have a SCCM 2012 R2 CU3 lab where pxe is not working, the clients are able to connect to SCCM server but the download gets stuck on the boot image & then it fails with the following error :-
Don't find any specific error related to this deployment in SMSPXE.log.
Thanks,
Pranay.

I've had some issues various places with NICs and the TFTP process. One fix I implemented was to add the following registry entry:
Location:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WDSServer\Providers\WDSTFTP
Name: MaximumBlockSize
Type: (REG_DWORD)
Value range: 512–1456
Base: (Decimal)
I set it to 1024, but you need to determine what value works for your environment.
This is documented here:
http://support.microsoft.com/kb/975710/en-us
Jeff

CCMSETUP not updating on SCCM 2012 SP1 CU3/CU4 primary site

I have a SCCM 2012 SP1 CU3 primary site and i can't upgrade the local installed SCCM Client.
The error I get in ccmsetup.log is:
<![LOG[MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002]LOG]!><time="15:44:22.408-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:300">
<![LOG[MSI: Action 15:44:22: Rollback. Rolling back action:]LOG]!><time="15:44:22.562-60" date="02-08-2014" component="ccmsetup" context="" type="0" thread="2496" file="msiutil.cpp:314">
<![LOG[File C:\windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action: CcmRegisterHostingConfiguration.
ErrorMessages:
Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002
]LOG]!><time="15:45:00.798-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:872">
<![LOG[Client installation has failed too many times. Ccmsetup will now abort.]LOG]!><time="15:45:00.830-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7941">
<![LOG[Successfully deleted the ccmsetup service]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2496" file="ccmsetup.cpp:3320">
<![LOG[InstallFromManifest failed 0x80070643]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7086">
<![LOG[CcmSetup failed with error code 0x80070643]LOG]!><time="15:45:05.832-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2324" file="ccmsetup.cpp:10544">
I have this on my primary and secondary servers as well.
Is upgrading to R2 recommended and will that solve this issue ?
When googling to this issue i found that there is a solution for this: remove MP, upgrade Client, install MP.
But this is my primary and secondary and on secondary i am not allowed to remove the MP. It is hardcoded enabled.

Try the following steps to specify the hotfix when installing the client.
1. Open an elevated command prompt.
2. Run a command line similar to the following – if CU3 has already been installed, the MSP file below should be on the site server, in the
\\servername\SMS_SITE\Client\hotfix folder:
\ccmsetup.exe PATCH=\Configmgr2012ac-sp1-kb2882125-x64.msp
Juke Chou
TechNet Community Support

SCCM 2012 Sp1 CU3 support Windows 2012 R2 deployment?

Hi,
Sorry for so basic question, but I have read few docuemnts, blogs and official materials and I'm a bit confused.
In our organization we have SCCM Sp1 CU3. We are planning create and next deploy Windows 2012R2 Server images. On some documentations there is CU3 supports only application managment, inventory and so on. but there is nothing about image deployment.
So, my question is - I have to upgrade SCCM 2012 Sp1 CU3 to SCCM2012R2 to capture, build and deploy Windows 2012R2 system?
Thank you.

Yes, you do. See what's new with ConfigMgr 2012 R2
http://technet.microsoft.com/en-us/library/dn236351.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Office 2013 Professional Plus - 32 bit Deployment takes an unacceptable time to deploy in SCCM 2012 - SP1 CU3

We recently migrated over to SCCM 2012 SP1 - CU3 the first of the year from SCCM 2007 SP2. We have used SCCM in the past to deploy Office 2010 and had deployed Office 2013 to our IT Dept. before moving over to SCCM 2012. The deployment went as
expected. Now that we are ready to start deploying Office 2013 to our corporate workstations, the deployment time is running 4.5 hours to 5.5 hours from the local site server DP. I am afraid to find out what time we are looking at for remote DP's.
The three factors that are different is that our SCCM site server is virtual, it is running 2012 for the OS, and obviously SCCM 2012-SP1 - CU3. We are using the same package source files. Previous to a successful deployment we were
seeing hash mismatch errors which MS support pointed us to the nic driver on the VM was using E1000E and to change it to a VMX something driver.
So I guess my question is anyone else out there deploying Office 2013 ProPlus - 32 bit from this type of environment? Our previous deployment time for office was a little over an hour (not five hours). Any suggestions where to look to improve
the deployment time?
I am expected to deploy this in one week and have been working on these issues for weeks.

I see now that you are using a combination of scripts and ConfigMgr package/program.
The AppEnforce.log file is for use with the new ConfigMgr Application model.
Is there any reason that you don't use the new model for deploying Office 2013? It's a single step process and perfect for it. If you use the Office Customisation Tool you can customise what you like. The process will then uninstall Office 2010 and install
Office 2013.
This is how you do it
http://www.gerryhampsoncm.blogspot.ie/2013/03/sccm-2012-sp1-step-by-step-guide-part_9368.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

New-CMVhd error Not Found - SCCM 2012 R2 CU3

When trying to execute New-CMVhd via powershell in SCCM 2012 R2 CU3 I get a "Not Found" error.
This happens in our production and pre-production environments.
Using the Console wizard works fine.
Command is:
New-CMVhd -Path "\\machine\D$\Windows2012R2Server_SCCM.vhd" -Name "Windows2012R2Server_SCCM" -Version "1.0" -VHDSize 100 -TaskSequencePackageId "XXX00123" -DistributionPointServerNames "server.contso.com" -Description "Built with Deploy Server To VHD Task Sequence." -Verbose
Output:
VERBOSE: Performing the operation "New" on target "Vhd: New".
VERBOSE: Executing WQL query: Select * From SMS_TaskSequencePackageReference_All where PackageID='XXX00123'
VERBOSE: Query options: None
VERBOSE: Executing WQL query: Select * From SMS_DistributionPointInfo where Name='server.contoso.com'
VERBOSE: Query options: None
VERBOSE: Query 'Select * From SMS_DistributionPointInfo where Name='server.contoso.com'' processed 1
results.
VERBOSE: Executing WQL query: SELECT Distinct tspr.RefPackageID FROM SMS_TaskSequencePackageReference_All AS tspr WHERE
tspr.PackageID='XXX00123' and tspr.RefPackageID Not In (SELECT PackageID FROM SMS_Package AS p WHERE
p.PkgSourceFlag=1)
VERBOSE: Query options: None
New-CMVhd : Not found
At line:1 char:1
+ New-CMVhd -Path \\machine\D$\Windows2012R2Server_SCCM.vhd -Name "Windows201 ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Microsoft.Confi...s.NewVhdCommand:NewVhdCommand) [New-CMVhd], WqlQueryExc
eption
+ FullyQualifiedErrorId : UnhandledExeception,Microsoft.ConfigurationManagement.Cmdlets.Osd.Commands.NewVhdCommand
Can anyone else reproduce this? I have a feeling it will be a premier support call to Microsoft :-(
Thanks

Hi,
Pls try to run the following command to import CM powershell module and change the path to be the CM server before your new-cmvhd command:
import-module 'C:\Program Files (x86)\Microsoft Configuration Manager\AdminConsole\bin\ConfigurationManager.psd1'
Set-Location CMserver:\
“Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.”

Create software update group that only contains post service pack hotfixes?

I'm creating software update groups for server and workstation OS. Is there a way to exclude pre-service pack updates from an update group (or even the search itself)? Example: all of our machines already have Windows 7 SP1 installed, therefore
I don't need to include any updates that were included in SP1. I know only required updates will be installed, but I'd rather not waste disk space downloading ones I don't need. Thx

The console shows you how many devices in your hierarchy require a given update. If you don't want to see updates that are not required by any devices, select Add Criteria > Required > Greater or Equal to 1 > Search. This assumes that the Software
Updates Evaluation cycle is run on the devices...
If you apply SP1 to all devices, the individual updates (pre-SP1), should not be required by the devices (they may even become superseded by SP1 - depends)... The count of Required in the console should be 0...
I know this is not the exact answer you're looking for, but it's easy...

My download appears to have worked, then it tries to validate, fails and says Software Update Unavailable - has happened 3 times so far

My ios 7 download appears to have worked, then it tries to validate, fails and says Software Update Unavailable - has happened 3 times so far

Thanks - I didn't realize there were separate validation servers. I've continued to try - 3 more failures - I will keep trying. The download worked in a timely manner so I thought I was "over the hump" :-)

SCCM 2012 - Task Seq - Install Lenovo AMT software - Failing with 2147500037 (80004005)

Hi there
Wondering is anyone has had any issues installing Intel Management Engine 10.0 software via a SCCM 2012 task sequence?
We have a number of older laptops which we build via a Windows 7 task sequence from SCCM 2012. As part of the install each laptop gets the appropriate version of the Intel ME software. All well and good.
We now have a new model to build (Lenovo T440) and for some reason the latest available version of Intel ME 10.0 software keeps failing in the task sequence with a 2147500037 (80004005) error.
This can mean different things but often means a permissions issue. Not sure what the permissions issue could be.
This software is installed at the same stage as previous versions of the same software are installed for older laptop models. Same install command too, SetupME.exe -s as per the document which comes with the software (in previous versions it is Setup.exe
not SetupME.exe but don't imagine the different file name is the problem).
I will try an older version but really we want to keep up with the latest available versions.
Anyone had problems installing this Intel ME v10.0 software via a SCCM 2012 task sequence?
Best regards
John

Does the install provide any logging? Does execmgr.log show any other info?
Per the readme, it should be setup.exe.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/girc15ww.txt
Unattended Install
This is for system administrators' use only.
1. Refer to the Manual Install section, and download and extract the file.
2. In the step 11 of the Installing files section, uncheck the checkbox next
to "Install ..... now", and then select Finish to cancel installation.
3. At the command line, execute Setup.exe with the -s option.
Example: [Path where the files were extracted]\Setup -s
Daniel Ratliff | http://www.PotentEngineer.com

SCCM 2012 SP1 Install fails at splash screen: Failed to create process of setupWpf.exe

Hello,
I can't seem to get past the initial install screen. When I click install I receive what is shown in the screen shot. The error in question is "Failed to create process of SetupWpf.exe" This is what I get after i click install. The error above
that one "WinHttpReceiveresponse failed 80072ee7" is what I get when I tried to download the latest updates from the splash screen. It was on like update 44 of 56 when it failed but I am not sure I need to pursue that one. I cant even get the insall
going.
Phil Balderos

I am also having the same issue..
I can start the sccm 2012 installation piror to installing SQL 2012 SP1. Once SQL installation is complete, and try to install sccm 2012 -> issue occur. Is this a sql issue, or a sccm 2012 issue.. I have download the SQL 2012 and SCCM 2012 FROM MS
twics.. I have rebuilt my lab twice already ...
Any help, not sure what step I am missing....
Hello Yuyut,
This issue is related to CM12 (not nessarly a widly known issue) perhaps something with the ISO. The copy I was using was from our MSDN subscription which kept failing. I downloaded it twice and still same issue. Since I am setting this up as a lab
for testing purposes I just ended up downloaded the 180 day evaluation and has worked for me so far. So again this is not related to SQL as I have noticed.
Thorsten did mention on this thred that I should check permissons of the account I was trying to install it from. That was not my issue but you could give that a look also.
Phil
Phil Balderos

SCCM 2012 SP1 - PowerShell command to create a software update group deployment DISABLED by default

Hello,
I create deployment jobs using new Powershell cmdlet "Start-CMSoftwareUpdateDeployment". However it looks there is no way with this cmdlet to create a job which is disabled by default.
Is it possible ? As an alternative, which cmdlet could I use to manage enable/disable job state ? I have not found anything so far.
Regards.
Sylvain

hi, i tried the solution to create a deployment using http://cm12sdk.net/?p=2014 link.
it creates deployment but it is not downloaded so a red cross sign is shown in front of software update group. can you guide me on which command to use to download software update after which we can try the script mentioned in the link.
thanks.

IN NEED OF A SCCM 2012 QUERY THAT SHOWS LAST TIME SOFTWARE WAS USED OR OPENED

Hello
I am in need of an SCCM 2012 query that shows PCs that have Visio , Adobe Professional and Visual Studio and the last time each was used or opened. I have the query below which give me the PC name and the product. Any assistance will be very helpful
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
like "%adobe acrobat%pro%"
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
like "%visio%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%viewer%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%service pack%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%security
update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%hydra%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%MUI%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
not like "%amd%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%microsoft visio%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%vision%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%add-in%"
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
= "Microsoft Visual studio 2012 devenv" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%hotfix%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%security%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
not like "%update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%service%"

Did you create a software metering rule for each software title? if not then you need you do that first and it will take over a week before you see results.
Also keep in mind that your query will only find x86 software titles.
http://www.enhansoft.com/

SCCM 2012 R2 -CU3 fails at 'Create Software Update Catalog'

Similar Messages

Maybe you are looking for