Sccm 2012 r2 error setup cannot compile mof file tasksequenceprovider.mof

Am getting this error during SCCM 2012 R2 installation on the same server which has SQL 2012 with SP1. "setup cannot compile mof file tasksequenceprovider.mof". Any help?

Hi,
The following blog introduced a tool scans winodws module which may help find out the missing file.
http://blogs.technet.com/b/configurationmgr/archive/2010/01/05/the-configuration-manager-service-pack-install-guide.aspx

Similar Messages

Setup was unable to compile the file ccmclasses.mof

First i have a access denied problem with push installation ;
MSI: Setup was unable to create the WMI namespace CCM
The error code is 80070005
MSI: Warning 25101. Setup was unable to delete WMI namespace ccm\dcm
The error code is 80070005
Installation failed with error code 1603
I've tried many actions include deleting repository directory and rebuilding dll and mof files ...
Finally i've added LOCAL SERVICE, NETWORK SERVICE, and SYSTEM accounts to Local administrators group and now there is no 80070005 error.
But i ve got a new error :)
MSI: Setup was unable to compile the file ccmclasses.mof
The error code is 8004402F
MSI: Warning 25002. Failed to delete CCM_Service_ErrorHandlerRegistration.Clsid="{0F95BCE5-2209-488a-B4BC-4396AD233C8D}" from CCM
The error code is 80041010
Installation failed with error code 1603
i ve almost 2000 clients with this situation and i think i lost my mind very soon.
Any help is appreciated.

Hi Bulent,
Very glad to hear the issue resolved and thanks for sharing your experience, which can help other community members facing similar problems. Also, if you have any further concerns, please do not hesitate to let us know and we are happy to be of further
assistance.
Thanks,
Yog Li -- Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Error message when compiling book "file is corrupt" referring to a photo. Or "cannot find original photo". Can you use photos that have been "edited" out of "Book Mode"?

Error message when compiling book "file is corrupt" referring to a photo. Or "cannot find original photo". Can you use photos that have been "edited" out of "Book Mode"?

I did copy it to my desktop, but it still won't let me open it. I think the file on the disc might be corrupt or something like that though the cd itself checks out fine as far as viruses go. I was able to verify the disc, but that's about it. My husband tried it on his iMac and we have the same issue. It's unzipping the folder, but won't let us open the folder on both the Mac Book Pro or the iMac by double clicking, going to file/open or right clicking. It just keeps saying the same message as I posted above. I think I'm just going to have the client put the pictures on either a memory card or a USB memory stick so she won't have to compress the files for zipping purposes. It's been too frustrating trying to open this folder on this cd she gave me. She said she created/zipped the cd on her Mac Book Pro but it sure won't open on mine.

Error Message "Setup cannot copy the file gp.ocx".

When I try to download Reader X to new Dell laptop running Windows 7 Pro, I get the error message as follows.
Setup cannot copy the file gp.ocx. Ensure that the locations specified below is correct, or change it and insert (Unknown) in the drive you specify.
c:\Users\Bill\AppData\Local\Temp\1DC2.tmp
Can anyone help me with how to proceed? Thanks.

Bummer! I read something about getting this error due to insufficient permissions, but I attempted to install as local admin and didn't work either. So I just uninstalled Adobe reader from the servers I was having this issue with, at least until a solution is available (?). I'm not happy, it is not convenient if I have to use another machine to view PDFs, but I'd rather be inconvenienced than have unpatched servers. Thanks for responding...let's hope Adobe responds...

Cannot compile servlet file

I cannot compile Servlet files on my WinXP environment.
my servlet.jar file is located at
c:\tomcat\jakarta-tomcat-3.3.1\common\lib\servlet.jar
what shall I do?
The error messages are only for servlet portion of code?

In XP you can set the path by rightclicking on my computer - then go to environment vairables and edit the path but I cannot see any for classpath???
What is the easist way yo use the class path?

Error 1 fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory C

Newbie to VC++
Getting the below error in VC++ 2005, Indesign CS4
1>------ Build started: Project: WriteFishPrice, Configuration: Debug Win32 ------
1>Performing Custom Build Step
1>Compiling...
1>WFPNoStrip.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>WFPID.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>VCPlugInHeaders.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>TriggerResourceDeps.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>SDKPlugInEntrypoint.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>Generating Code...
1>Build log was saved at "file://c:\id6sdk\build\win\objD\WriteFishPrice\BuildLog.htm"
1>WriteFishPrice - 5 error(s), 0 warning(s)
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
I have added the path of config.hpp in "addition include directories" still it is throwing the same error.
Regards,
Suresh

Neither the first not the second one:
am using the following path:
C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\external\asl\boost_libraries\boost
Now i have copied the complete 'external' folder to C:\id6sdk\ and added the directory now it is showing the following error:
Getting the following error:
fatal error C1083: Cannot open include file: 'IPMUnknown.h': No such file or directory C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp 46
Don't understand the concept one error leading to the other error.
How to come out of these kind of problem.
Regards,
Suresh

Re: fatal error LNK1181: cannot open input file"OLDNAMES.LIB

Hi,
May be it is because it appears twice on your script :
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
At 18:40 18/12/98 +0100, Hervé Depoorter wrote:
Hello, everybody.
My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
Somebody can help me?
Thanks a lot for your assistance.
>
I tried to passe a C structure between Forte and C.
I taked the exemple of forté : technote ID : 10637.
We use Forte 3.0.j.1 and I try the example on a NT4 server.
There are several projects that make up this application. They are asfollows:
StructExampleGUI - This is this project. It is the GUI front
(File: StructGu.Pex) end that calls the C wrapper.
StructSharedObjects - This project defines the Employee object
(File: StructSh.Pex) that is needed for both the GUI and
for the StructExampleServices project.
StructExampleServices - This project defines the StructExample
(File: StructSO.Pex) services object. This is a restricted
project whose purpose is to actually call
the C project.
StructExampleProject - This is the External C Project that defines
(File: Struct.Pex) the interface necessary for Forte to generate
the wrapper code needed to call the C file.
StructEX.c - This is the C code that is being wrappered. It
has one function getemployee that modifies an
input output structure. The memory allocation is
done by Forte in the StructExampleServices
project.
>
First of all, I compile the StructEx.C
After, in the Struct.pex, I set the parameter :
HAS PROPERTY
CompatibilityLevel = 0;
ProjectType = LIBRARY;
Restricted = TRUE;
MultiThreaded = TRUE;
LibraryName = 'struct';
extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
e:/Pgmprod/cpp/50/lib',
ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
I load the struct.pex.
Double click on the StructExampleProject
File:Configure As:Library
Make distibution and select Full make, Install in current Environment & Auto
Compile
When I tried this in the first time, I has a probleme with struct.bom. I
resolved
that. (technote 11431:Autocompile on NT fails to build the compiled
partition)
>
But now, I'm another problem (see below) and I don't find the solution.
Somebody can help me? Thanks a lot for your assistance.
The problem : Forté say 'fatal error LNK1181: cannot open input file
"OLDNAMES.LIB"'
BEGIN FILE
Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
Processing BOM file: struct.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
struct.cc
Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
/DLL /NOD
/OUT:struct.dll
/DEF:struct.nti
struct.obj
O:\Herve\ForteAPI\structex.obj
e:\pgmprod\forte\30J1\install\lib\qqsm.lib
e:\pgmprod\forte\30J1\install\lib\qqfo.lib
e:\pgmprod\forte\30J1\install\lib\qqdo.lib
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
e:\pgmprod\forte\30J1\install\lib\qqcm.lib
e:\pgmprod\forte\30J1\install\lib\qqkn.lib
e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
/DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
/Ie:\pgmprod\forte\30J1\install\inc\os
/Ie:\pgmprod\forte\30J1\install\inc\ds
/Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
/Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tpstruct.cc
link @linkopt.lrf
Error during compilation, aborting.
END FILE
Completed compilation for PC NT.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
[email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

ex_rep_chan is dependent on the db library, which judging by your printout, has not finished building. Which is odd, since Visual Studio is usually smarter about dependencies. Just rebuild ex_rep_chan and you should be fine.
Lauren Foutz

Fatal error LNK1181: cannot open input file"OLDNAMES.LIB-Reply

The OLDNAMES.LIB file should be in your Visual C++ library directory (eg c:\Program Files\DevStudio\VC\lib). If you reread TechNote 11431it explains how to set up your LIB environment variable so that the linker can find the appropriate files.
Regards
Mark Carruthers
20th Century Fox
Hervé Depoorter <[email protected]> 12/18/98 09:40am >>>
Hello, everybody.
My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
Somebody can help me?
Thanks a lot for your assistance.
I tried to passe a C structure between Forte and C.
I taked the exemple of forté : technote ID : 10637.
We use Forte 3.0.j.1 and I try the example on a NT4 server.
There are several projects that make up this application. They are as follows:
StructExampleGUI - This is this project. It is the GUI front
(File: StructGu.Pex) end that calls the C wrapper.
StructSharedObjects - This project defines the Employee object
(File: StructSh.Pex) that is needed for both the GUI and
for the StructExampleServices project.
StructExampleServices - This project defines the StructExample
(File: StructSO.Pex) services object. This is a restricted
project whose purpose is to actually call
the C project.
StructExampleProject - This is the External C Project that defines
(File: Struct.Pex) the interface necessary for Forte to generate
the wrapper code needed to call the C file.
StructEX.c - This is the C code that is being wrappered. It
has one function getemployee that modifies an
input output structure. The memory allocation is
done by Forte in the StructExampleServices
project.
First of all, I compile the StructEx.C
After, in the Struct.pex, I set the parameter :
HAS PROPERTY
CompatibilityLevel = 0;
ProjectType = LIBRARY;
Restricted = TRUE;
MultiThreaded = TRUE;
LibraryName = 'struct';
extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
e:/Pgmprod/cpp/50/lib',
ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
I load the struct.pex.
Double click on the StructExampleProject
File:Configure As:Library
Make distibution and select Full make, Install in current Environment & Auto
Compile
When I tried this in the first time, I has a probleme with struct.bom. I
resolved
that. (technote 11431:Autocompile on NT fails to build the compiled partition)
But now, I'm another problem (see below) and I don't find the solution.
Somebody can help me? Thanks a lot for your assistance.
The problem : Forté say 'fatal error LNK1181: cannot open input file
"OLDNAMES.LIB"'
BEGIN FILE
Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
Processing BOM file: struct.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
struct.cc
Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
/DLL /NOD
/OUT:struct.dll
/DEF:struct.nti
struct.obj
O:\Herve\ForteAPI\structex.obj
e:\pgmprod\forte\30J1\install\lib\qqsm.lib
e:\pgmprod\forte\30J1\install\lib\qqfo.lib
e:\pgmprod\forte\30J1\install\lib\qqdo.lib
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
e:\pgmprod\forte\30J1\install\lib\qqcm.lib
e:\pgmprod\forte\30J1\install\lib\qqkn.lib
e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
/DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
/Ie:\pgmprod\forte\30J1\install\inc\os
/Ie:\pgmprod\forte\30J1\install\inc\ds
/Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
/Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tp struct.cc
link @linkopt.lrf
Error during compilation, aborting.
END FILE
Completed compilation for PC NT.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

ex_rep_chan is dependent on the db library, which judging by your printout, has not finished building. Which is odd, since Visual Studio is usually smarter about dependencies. Just rebuild ex_rep_chan and you should be fine.
Lauren Foutz

Fatal error LNK1181: cannot open input file"OLDNAMES.LIB

Hello, everybody.
My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
Somebody can help me?
Thanks a lot for your assistance.
I tried to passe a C structure between Forte and C.
I taked the exemple of forté : technote ID : 10637.
We use Forte 3.0.j.1 and I try the example on a NT4 server.
There are several projects that make up this application. They are as follows:
StructExampleGUI - This is this project. It is the GUI front
(File: StructGu.Pex) end that calls the C wrapper.
StructSharedObjects - This project defines the Employee object
(File: StructSh.Pex) that is needed for both the GUI and
for the StructExampleServices project.
StructExampleServices - This project defines the StructExample
(File: StructSO.Pex) services object. This is a restricted
project whose purpose is to actually call
the C project.
StructExampleProject - This is the External C Project that defines
(File: Struct.Pex) the interface necessary for Forte to generate
the wrapper code needed to call the C file.
StructEX.c - This is the C code that is being wrappered. It
has one function getemployee that modifies an
input output structure. The memory allocation is
done by Forte in the StructExampleServices
project.
First of all, I compile the StructEx.C
After, in the Struct.pex, I set the parameter :
HAS PROPERTY
CompatibilityLevel = 0;
ProjectType = LIBRARY;
Restricted = TRUE;
MultiThreaded = TRUE;
LibraryName = 'struct';
extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
e:/Pgmprod/cpp/50/lib',
ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
I load the struct.pex.
Double click on the StructExampleProject
File:Configure As:Library
Make distibution and select Full make, Install in current Environment & Auto
Compile
When I tried this in the first time, I has a probleme with struct.bom. I
resolved
that. (technote 11431:Autocompile on NT fails to build the compiled partition)
But now, I'm another problem (see below) and I don't find the solution.
Somebody can help me? Thanks a lot for your assistance.
The problem : Forté say 'fatal error LNK1181: cannot open input file
"OLDNAMES.LIB"'
BEGIN FILE
Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
Processing BOM file: struct.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
struct.cc
Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
/DLL /NOD
/OUT:struct.dll
/DEF:struct.nti
struct.obj
O:\Herve\ForteAPI\structex.obj
e:\pgmprod\forte\30J1\install\lib\qqsm.lib
e:\pgmprod\forte\30J1\install\lib\qqfo.lib
e:\pgmprod\forte\30J1\install\lib\qqdo.lib
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
e:\pgmprod\forte\30J1\install\lib\qqcm.lib
e:\pgmprod\forte\30J1\install\lib\qqkn.lib
e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
/DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
/Ie:\pgmprod\forte\30J1\install\inc\os
/Ie:\pgmprod\forte\30J1\install\inc\ds
/Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
/Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tp struct.cc
link @linkopt.lrf
Error during compilation, aborting.
END FILE
Completed compilation for PC NT.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hussein,
Please find below the requested information,
1. Path variable value after sourcing the apps env file,
D:\oracle\VIS\apps\apps_st\appl>APPSVIS_oracletemp.cmd
ECHO is off.
ECHO is off.
Tue 11/23/2010 02:36 PM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual Studio 2008 x86 tools.
APPSORA.cmd exiting with status 0
D:\oracle\VIS\apps\apps_st\appl>
D:\oracle\VIS\apps\apps_st\appl>echo %path%
C:\VS2008\Common7\IDE;C:\VS2008\VC\BIN;C:\VS2008\Common7\Tools;C:\Windows\Micros
oft.NET\Framework\v3.5;C:\Windows\Microsoft.NET\Framework\v2.0.50727;C:\VS2008\V
C\VCPackages;C:\Program Files\\Microsoft SDKs\Windows\v6.0A\bin;D:\oracle\VIS\ap
ps\apps_st\appl\au\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl\fnd\12.0.0\bin;D:\
oracle\VIS\apps\apps_st\appl\ad\12.0.0\bin;D:\oracle\VIS\apps\tech_st\10.1.3\app
sutil\jdk\jre\bin;D:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-m
ulti-thread\;D:\oracle\VIS\apps\apps_st\comn\util\unzip\unzip;D:\oracle\VIS\apps
\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.2\bin;D:\oracle
\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.3\apps
util\jdk\jre\bin;C:\cygwin\bin;C:\Windows;C:\Windows\system32;D:\oracle\VIS\apps
\tech_st\10.1.3\ant\bin
D:\oracle\VIS\apps\apps_st\appl>
2. gnumake version is as follows,
D:\oracle\VIS\apps\apps_st\appl>gnumake --version
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for i386-pc-mingw32
D:\oracle\VIS\apps\apps_st\appl>
Thanks,
Rajesh.

Fatal error C1083: Cannot open include file: 'NiVector.h': No such file or directory

I have a old source code that are using Measurement Studio I try to compile to do some modifications to the old source code but I have the next Compiler error "C:\Program Files\National Instruments\MeasurementStudio\VC\Include\NiColorVector.h(24) : fatal error C1083: Cannot open include file: 'NiVector.h': No such file or directory" I install the Measurement Studio 2015 try to fixed the error but I can't If I search the NiVector.h I can't find it something can help me please I need the NIVector.h file
Thank you.

In Visual C++ you have to go to the Tools menu and select Options... then on the Directories tab you have to add for Include files both the jdk\include AND jdk\include\win to the list of directories and then there will be no problem finding the header files.

Trying to install itunes on my new windows 8 laptop and getting an error message cannot write to file?

error message cannot write to file when trying to install itunes on windows 8 laptop.

Hi Stacy,
Welcome to Apple Support Communities.
Take a look at the article below, it provides a lot of great tips that will resolve most iTunes installation issues.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
If you run into any issues, just reply with details about the step you're on and what you're seeing.
-Jason

I just tried to update Firefox to version 9.0.1. It got to 13% extracting, then I got an error message, Cannot Open Output File. Can you please help me?

I just tried to update Firefox to version 9.0.1. It got to 13% extracting, then I got the error message, Cannot Open Output File.

The file could be downloaded incorrectly. Could you redownload it again from [http://getfirefox.com http://getfirefox.com]?

Bearts Audio Control Pannel will not open. Get error message cannot find startup file

Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500Z

Hi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

SAP Management Console : Error MMC cannot open the file "C:\WINDOWS\sapmmc.

Hi Experts,
We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAP

Hi,
Looks like your mmc dll is corrupted, with your install and uninstall of software.
Two Options:
1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
OR
2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
Hope this helps. points are welcome.
-K

SAP Management Console : Error : MMC cannot open the file

We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAP

Hi Alin,
Thanks for your reply, we have deleted only folders
- SAP xMII 11.5
- SAP xMII CMS 11.5
- SAP xMII Security 11.5
- Microsoft SQL Server folder
from control panel --> add and remove folder, when we were deleting these folders, IIS services were stopped by the system. After deleting the same we faced this problem.
Regards,
Study SAP

Sccm 2012 r2 error setup cannot compile mof file tasksequenceprovider.mof

Similar Messages

Maybe you are looking for