SCCM 2012 R2 Pull DPs

    Hello to all,
this article states that "There should be a good network connectivity between pull-distribution points and source distribution points so that you can achieve efficient and fast software distribution."
    Question: as far as I know DPs can compress data from source to them. Is it really important to have good connectivity to source so pull DPs can be used? Regular DPs can be used on a site that has no Secondary and still get SWs/Packets from its
secondary server in a compressed way.
    Regards, EEOC.

    Question: as far as I know DPs can compress data from source to them. Is it really important to have good connectivity to source so pull DPs can be used? Regular DPs can be used on a site that has no Secondary and still get SWs/Packets
from its secondary server in a compressed way.
That is incorrect. DPs and transfer to DPs add no compression. Even site to site transfers are not compressed, they are simply put into an archive to my knowledge.
The statement is a cause and effect statement. If the connection is not good, then you will not achieve efficient and fast software distribution. It doesn't say it won't work though.
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

  • SCCM 2012 R2 Pull distribution fails on remote DPs

    I have a few remote distribution points that I've been able to distribute driver packages to in the past, but after loading updates on my primary site server and the DPs, distribution of new driver packages fail even though it distributes fine to my primary
    site server.
    All DPs are in remote subnets connected via VPN.

    Actually when you use pull DP that mean there will be a standard DP as source, where all the content will be downloading on pull DP from the source DP. so pull DPs should have good enough network from standard DP to pull DPs. and distributed content should
    be available on source DP, otherwise content distribution will be failed.
    Sharad Singh | My blogs: SharadTech | Twitter:
    @SinghSharaad | | Please remember to click “Mark as Answer” on the post that helps you.This can be beneficial to other community members reading the thread.

  • SCCM 2012 R2 & Pull Distribution Point Casuing 0 Byte amd64 folders

    Experiencing an extremely frustrating problem.
    ENVIRONMENT:
    1 Primary Site Server / DP (Main Office)
    40 DP's (Remote School Locations)
    - Hosted on a file server VM
    - Contains 3 partitions: C: (System), E: (Data), I: (PKG share)
    OS: Server 2008 R2 (Primary Site Server and File Servers / DP's)
    SCCM Version: SCCM 2012 R2 
    We recently upgrade to SCCM 2012 R2. I have confirmed that this has not caused the problem I am about to describe. The only other change that has occurred recently is that we configured all of our DP's at each of our 40 sites to be pull distribution points.
    While this seems to be working fine we are now seeing a whole bunch of 0 Byte alpha numeric folders with a 0 Byte amd64 subfolder. These folders seem to attach to the E: drive on all of our File server distribution points....for the life of me I cannot figure
    out why and this occurred as soon as we switched to pull distribution points. While this does not seem to be having an erroneous effect on our environment, it is annoying and somewhat disconcerting as I have not been able to ascertain what is causing it. Any
    SCCM admins out their ever encountered this?
    Thanks

    Yes, I have examined the logs using cmtrace and done a search for the amd64 string to see if any of the logs indicate its creation as part of the pull dp process. I have not found anything as of yet.
    Thanks

  • SCCM 2012 R2 Pull DP fails, works on Update Distribution Points

    I'm seeing some odd behavior out of a DP, in particular around driver packages. The system is running SCCM 2012 R2.  When I create the driver package I deploy it to the DP on the Primary Site Server. That usually happens in a couple of minutes or less.
    I then deploy to a remote DP configured for Pull.  This generates the log entries below in the PullDP.log. Even waiting hours doesn't seem to help. If I do a Update Distribution Points for the package, it runs successfully.  I know
    there was something similar fixed in SP1 CU3.
    Intializing DP Monitoring Manager... PullDP 3/21/2014 8:48:54 PM 3564 (0x0DEC)
    Getting site code PullDP 3/21/2014 8:48:54 PM 3564 (0x0DEC)
    Getting DP Cert Type PullDP 3/21/2014 8:48:54 PM 3564 (0x0DEC)
    Getting this DP NALPath PullDP 3/21/2014 8:48:54 PM 3564 (0x0DEC)
    Report state message 0x00000004 to MP PullDP 3/21/2014 8:48:54 PM 3564 (0x0DEC)
    Report Body: <ReportBody><StateMessage MessageTime="20140322004854.000000+000" SerialNumber="1"><Topic ID="ACC0006D" Type="902" IDType="0"/><State ID="4" Criticality="0"/><UserParameters
    Flags="0" Count="3"><Param>ACC0006D</Param><Param>["Display=\\DP.xxxxx.xxx\"]MSWNET:["SMS_SITE=ACC"]\\DP.xxxxx.xxx\</Param><Param>{B187E44B-4BF3-4748-B437-AFF29D679AA3}</Param></UserParameters></StateMessage></ReportBody>
     PullDP 3/21/2014 8:48:54 PM 3564 (0x0DEC)
    CPullDPResponse::ReportPackageState return value 0x00000000. PullDP 3/21/2014 8:48:55 PM 3564 (0x0DEC)
    Start Download  package ACC0006D version 1 PullDP 3/21/2014 8:48:55 PM 3460 (0x0D84)
    Start Download  package ACC00070 version 1 PullDP 3/21/2014 8:48:55 PM 3460 (0x0D84)
    ExecuteJob (1-NotStarted) 9A25E477-3C0C-499E-A0C1-65243BDBCBF0 for package ACC00070, version 1 PullDP 3/21/2014 8:48:55 PM 2712 (0x0A98)
     Cannot find FileInfo (\\?\E:\SMS_DP$\ACC00070\9A25E477-3C0C-499E-A0C1-65243BDBCBF0.tar), content download failed PullDP 3/21/2014 8:48:55 PM 2712 (0x0A98)
    CPullDPPkgContJob::ExecuteJob() failed for package ACC00070, version 1 PullDP 3/21/2014 8:48:55 PM 2712 (0x0A98)
    State at failure: NotStarted PullDP 3/21/2014 8:48:55 PM 2712 (0x0A98)
    Content job 9A25E477-3C0C-499E-A0C1-65243BDBCBF0 has failed for package ACC00070, version 1 PullDP 3/21/2014 8:48:55 PM 2712 (0x0A98)
    Package job has failed for package ACC00070, version 1 PullDP 3/21/2014 8:48:55 PM 2712 (0x0A98)
    Bob

    We ended up changing the DP back to a standard distribution point.  That allowed the driver package to distribute successfully.  so as a result I can't access the logs any longer.
    I should note for anyone who goes searching for this that we had problems with every one of our driver packages.  As I dug into it I found the contents, it looked like for some reason that it wasn't being transferred from the download location into
    the final DP distribution location.  It almost looked like SCCM was ignoring driver package types.  I don't know if its a bug or just something quirky about this environment.
    We were hoping to use Pull DP to handle our distributions more effectively, but we've backed off on that because of all the issues we've had with it.  I hate say it, but it appears to be another SCCM 2012 feature that sounds like a good idea, but the
    implementation leaves a lot to be desired.
    Bob

  • SCCM 2012 - Pull distribution point and target PKI or HTTPS DPs

    I have spent several days researching this and so far have found only a single page that even takes a stab at offering a solution.
    Problem:
    Trying to target an HTTPS DP when creating a pull distribution point in SCCM 2012 R2. The link that I'm referring to that does offer a workaround is here(guess I can't post a link, but it ends with the following, how-to-set-an-https-distribution-point-as-a-source-dp-for-pull-dps)
    I have several problems with the proposed solution.
    Is a script really the only way to proceed with something that has up till now been a built in feature with the rest of the product.
    You have to provision the DP to use a self signed cert initially for it to even work, then supposedly you can add the private key to the DP later.
    Does that mean I have to unbind the cert from both the pull and target/source push DP in IIS?
    Powershell which would be a logical way to go, doesn't seem to make any head way(Mr. Snover I know you don't oversee configman but please push for more documentation, you've taught me to live and die by get-help. A single example for a command as large
    as set-cmdistributionpoint or add-cmdistributionpoint is a shame. Perhaps my update help just didn't finish properly and I'm talking prematurely. If that is the case then I apologize!)
    Is there no other solution other than build the DP with a self signed cert then run this VB script and then switch the private key later? I have read through a lot of the pull DP documentation and it makes mention of leveraging the SDK but I haven't seen
    anything definitive. I would like to at the very least convert this from VB to powershell(if that script is the only option) and I know how to convert the portions where it's interacting with the site's WMI namespace (smsprovider if I'm not mistaken).
    What I don't know how to do, rather don't have the chops for is what comes after. The site control file piece, I see it's also WMI and I could spend the time stepping through the different piece and just might to learn more about SCCM in the lab anyhow. I've
    spent the last year getting to know powershell and have spent next to no time with VB. I know enough to recognize what a script is doing.
    The environment:
    The reason this is important for me is I'm about to start the production build(been all lab up till now) that is going to have just under 300 DPs in the field connected via T1 lines. They were all 07 secondary sites. I was thinking about migrating them using
    the migration tool but considering the amount of work its going to take if that link is the ONLY path to target a HTTPS DP then I might as well just spend the time and manually uninstall and reinstall the field DPs. The client count in the field is an average
    of 50 machines per site where there are on-prem devices... Total client count is around 25k. The primary site in the datacenter will house the majority of the site roles unless I start running into resource issues, at which time I will begin offloading site
    roles to one of two more servers that I have slated for the project. No CAS, no Secondaries. SQL is co-located on the primary.
    Ramblings:
    I'm sure there are more people out there using PKI, and using pull DPs. How have you managed to target your HTTPS enabled DPs? Security wants this to be a HTTPS only environment, and up until now I have successfully done that. If someone could please point
    me in the direction of some more thorough documentation I would be very grateful. I understand that this is a somewhat new feature, but there has to be an easier way. Perhaps powershell can cleanly do it with the set-cmdistribution point...but when I update
    help and do showwindow for the command I only get one example and so far haven't found any other stories like mine with the exception of the link I posted in the beginning.
    While I'm rambling, Wally there are a lot of us in the community that are going to miss your presence at Microsoft and should you read this I wish you luck with your new position. But that is a whole different topic. Thanks in advance for any links or help
    you can provide. -K.R.

    Yes, this is the only way, from
    http://technet.microsoft.com/en-us/library/gg712321.aspx#BKMK_PlanPullDps: "However, you can use the Configuration Manager SDK to specify a source distribution point that is configured for HTTPS. To use a source distribution point that is configured
    for HTTPS, the pull-distribution point must be co-located on a computer that runs the Configuration Manager client. "
    Does "why" really matter , who cares? It just is. Whether it was an oversight, a coding bug, or an act of God doesn't change anything. Why does there "have to be" an easier way? And what's wrong with using the VBScripts others have
    written? A script is a script is a script particularly if you've been given it already. Just because the hammer is pink doesn't mean it can't hammer the nail in.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Windows 8.1 system with new Office 2013 install not pulling down any Office 2013 updates from my SCCM 2012 SP1 server

    Hi,
    I've just setup a new Windows 8.1 system and added to my SCCM 2012 SP1 server and all is good and it pulled down all the correct Windows updates and pulls down automatically the FEP updates that are distributed from SCCM 2012 daily. 
    I just installed Office 2013 on this system and have activated it as necessary.  The problem is that the system doesn't seem to be pulling down any of the Office 2013 updates that have distributed thru SCCM.  I have other systems with
    Office 2013 installed and they have pulled down Office 2013 updates in the past when I published them.
    If I look at the Office 2013 updates in the SCCM console software section, I can see that for example it shows that Office 2013 SP1 (x86) is needed by one system and installed on 8 other systems and shows as downloaded and deployed.
    I've restarted the new system multiple times and also tried to force a software update check from the Configuration Manager applet but nothing seems to happen.
    What can I check to try and determine what the problem is?
    Thanks in advance,
    Nick

    Yes, the 8.1 system is a member of collection where the update deployment is targeted.
    Are there any specific logs I should check in the client?  If I check the WindowsUpdate.log I can see messages about the machine pulling down the FEP updates but that's all it appears to be doing.
    in CCM\logs, focus on the updatehandler and updatedeployment, to begin with
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • "Enable distribution-point sharing for this source site" did not showing SCCM 2007 DPs as SCCM 2012 content shares for CM12 clients

    Hi
    We have one central site server and three primary site servers in SCCM 2007 and completed the SCCM 2012 migration as single hierarchy.
    During the migration, We have configured SCCM 2007 Central site server as source hierarchy for data gathering process and configured the "Enable distribution-point sharing for this source site" to make SCCM 2007 distribution points
    as SCCM 2012 content shares to serve SCCM 2012 migrated clients. Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this
    source site" but data gathering process is completing successfully.
    Is anyone have idea, why these SCCM 2007 DPs did not appearing as SCCM 2012 content shares under "Shared Distribution Points"
    Thanks in Advance
    srkr

     Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this source
    site" but data gathering process is completing successfully.
    Earlier all the shared DPs are showing under  Shared Distribution Points ? Or since starting itself these DPs are not showing down? Have you checked migmctrl.log for some clue?
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

  • Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 IP for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS which is in a different .Domain

    Hi,
    Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 Ip for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS . ?
    Scenario: We are building 1 SCCM 2012 primary site and 2 DPs in one domain . In future this will attach to a CAS server which is in different domain. Can we assign  2 IPs in Primary site server , one IP will use to communicate with its 2 DPs and second
    IP for communicating with the CAS server which is in a different domain.? 
    Details: 
    1)Server : Windows 2012 R2 Std , VM environment .2) SCCM : SCCM 2012 R2 .3)SQL: SQL 2012 Std
    Thanks
    Rajesh Vasudevan

    First, it's not possible. You cannot attach a primary site to an existing CAS.
    Primary sites in 2012 are *not* the same as primary sites in 2007 and a CAS is 2012 is completely different from a central primary site in 2007.
    CASes cannot manage clients. Also, primary sites are *not* used for delegation in 2012. As Torsten points out, multiple primary sites are used for scale-out (in terms of client count) only. Placing primary sites for different organizational units provides
    no functional differences but does add complexity, latency, and additional failure points.
    Thus, as the others have pointed out, your premise for doing this is completely incorrect. What are your actual business goals?
    As for the IP Addressing, that depends upon your networking infrastructure. There is no way to configure ConfigMgr to use different interfaces for different types of traffic. You could potentially manipulate the routing tables in Windows but that's asking
    for trouble IMO.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • SCCM 2012 R2 coexist with SCCM 2007 - DPs issue

    Hi all,
    I have a SCCM 2012 R2 which coexists with SCCM 2007 and I'm not interested in a migration, but my question concerning the use of DPs. Is it possible for 2012 R2 clients to use a 2007 DPs, i.e. are there settings for a sort of compatibility? I've looked among
    links, but most of them are related to migration.
    Please advise,
    Domenico

    No, you can only share a distribution point during a migration between a source and destination hierarchy (see also:
    http://technet.microsoft.com/en-us/library/gg712275.aspx). Without a migration that's not possible. 
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • SCCM 2012 R2 Distribution Point Installs but does not send packet.

    I installed SCCM 2012 Primary Site on a server and need to create 18 Dps, could create 12 however I am having trouble creating the last 6, the link from headquarters to branch MPLS is a full 256 Kb, it creates the folders and DPs however the server can not
    send the first two packages that are Client Package Configuration Manager and Configuration Manager Client Upgrade package only 6 DPS the other 12 I got. 
    The computer account is in the Administrators group and Admin Domains; 
    Already checked the WMI with Wbemtest; 
    I uninstalled and installed the DP again; 
    Below is the log, changed the name to contoso by issues of customer privacy.
    Sleep 928 seconds...      SMS_DISTRIBUTION_MANAGER             14/08/2014 00:00:07       2528 (0x09E0)
    Sleeping for 60 minutes before content cleanup task starts.      SMS_DISTRIBUTION_MANAGER             14/08/2014 00:10:52              
    5772 (0x168C)
    Sleep 30 minutes...        SMS_DISTRIBUTION_MANAGER             14/08/2014 00:12:13       5292 (0x14AC)
    Used 0 out of 10 allowed processing threads.   SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:40       2528 (0x09E0)
    Starting package processing thread, thread ID = 0x14F4 (5364) SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:40              
    2528 (0x09E0)
    Sleep 60 seconds...        SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:40       2528 (0x09E0)
    STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Server1.contosoSITE=LAA PID=4288 TID=5364 GMTDATE=qui ago 14 03:15:41.072 2014 ISTR0="LAA00003" ISTR1="" ISTR2=""
    ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="LAA00003"       SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:15:41       5364 (0x14F4)
    Retrying package LAA00003       SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:41       5364 (0x14F4)
    No action specified for the package LAA00003. SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:41       5364 (0x14F4)
    Start adding package to server ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\...                SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:15:41       5364 (0x14F4)
    Will wait for 1 threads to end.   SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:41       5364 (0x14F4)
    Attempting to add or update a package on a distribution point.               SMS_DISTRIBUTION_MANAGER               
    14/08/2014 00:15:41       5264 (0x1490)
    Thread Handle = 0000000000002330       SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:41       5364 (0x14F4)
    The distribution point ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\ is not installed or upgraded yet.           SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:15:41       5264 (0x1490)
    Error occurred. Performing error cleanup prior to returning.     SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:41              
    5264 (0x1490)
    DP thread with array index 0 ended.     SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:41       5364 (0x14F4)
    DP thread with thread handle 0000000000002330 and thread ID 5264 ended.    SMS_DISTRIBUTION_MANAGER                14/08/2014 00:15:41      
    5364 (0x14F4)
    Only retrying local DP update for package LAA00003, no need to replicate package to child sites.                SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:15:41       5364 (0x14F4)
    StoredPkgVersion (1) of package LAA00003. StoredPkgVersion in database is 1.                SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:15:41       5364 (0x14F4)
    SourceVersion (1) of package LAA00003. SourceVersion in database is 1.            SMS_DISTRIBUTION_MANAGER               
    14/08/2014 00:15:41       5364 (0x14F4)
    STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Server1.contosoSITE=LAA PID=4288 TID=5364 GMTDATE=qui ago 14 03:15:41.684 2014 ISTR0="Configuration Manager Client Package"
    ISTR1="LAA00003" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="LAA00003" SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:15:41                5364 (0x14F4)
    Failed to process package LAA00003 after 66 retries, will retry 34 more times   SMS_DISTRIBUTION_MANAGER                14/08/2014 00:15:41      
    5364 (0x14F4)
    Exiting package processing thread.         SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:41      
    5364 (0x14F4)
    Used 0 out of 10 allowed processing threads.   SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:46       2528 (0x09E0)
    Starting package processing thread, thread ID = 0x14D0 (5328) SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:47              
    2528 (0x09E0)
    Sleep 1824 seconds...    SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:47       2528 (0x09E0)
    STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Server1.contosoSITE=LAA PID=4288 TID=5328 GMTDATE=qui ago 14 03:15:47.300 2014 ISTR0="LAA00004" ISTR1="" ISTR2=""
    ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="LAA00004"       SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:15:47       5328 (0x14D0)
    Retrying package LAA00004       SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:47       5328 (0x14D0)
    No action specified for the package LAA00004. SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:47       5328 (0x14D0)
    Start adding package to server ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\...                SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:15:47       5328 (0x14D0)
    Will wait for 1 threads to end.   SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:47       5328 (0x14D0)
    Attempting to add or update a package on a distribution point.               SMS_DISTRIBUTION_MANAGER               
    14/08/2014 00:15:47       5736 (0x1668)
    The distribution point ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\ is not installed or upgraded yet.           SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:15:47       5736 (0x1668)
    Error occurred. Performing error cleanup prior to returning.     SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:47              
    5736 (0x1668)
    Thread Handle = 0000000000002A50      SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:47       5328 (0x14D0)
    DP thread with array index 0 ended.     SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:47       5328 (0x14D0)
    DP thread with thread handle 0000000000002A50 and thread ID 5736 ended.   SMS_DISTRIBUTION_MANAGER                14/08/2014 00:15:47      
    5328 (0x14D0)
    Only retrying local DP update for package LAA00004, no need to replicate package to child sites.                SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:15:47       5328 (0x14D0)
    StoredPkgVersion (1) of package LAA00004. StoredPkgVersion in database is 1.                SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:15:47       5328 (0x14D0)
    SourceVersion (1) of package LAA00004. SourceVersion in database is 1.            SMS_DISTRIBUTION_MANAGER               
    14/08/2014 00:15:47       5328 (0x14D0)
    STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Server1.contosoSITE=LAA PID=4288 TID=5328 GMTDATE=qui ago 14 03:15:47.910 2014 ISTR0="Configuration Manager Client Upgrade Package"
    ISTR1="LAA00004" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="LAA00004"             
    SMS_DISTRIBUTION_MANAGER                14/08/2014 00:15:47       5328 (0x14D0)
    Failed to process package LAA00004 after 66 retries, will retry 34 more times   SMS_DISTRIBUTION_MANAGER                14/08/2014 00:15:47      
    5328 (0x14D0)
    Exiting package processing thread.         SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:47      
    5328 (0x14D0)
    Used 0 out of 10 allowed processing threads.   SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:52       2528 (0x09E0)
    Sleep 1825 seconds...    SMS_DISTRIBUTION_MANAGER             14/08/2014 00:15:52       2528 (0x09E0)
    Sleep 30 minutes...        SMS_DISTRIBUTION_MANAGER             14/08/2014 00:42:18       5292 (0x14AC)
    Used 0 out of 10 allowed processing threads.   SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:23       2528 (0x09E0)
    Starting package processing thread, thread ID = 0x1394 (5012) SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:23              
    2528 (0x09E0)
    Sleep 60 seconds...        SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:23       2528 (0x09E0)
    STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Server1.contosoSITE=LAA PID=4288 TID=5012 GMTDATE=qui ago 14 03:46:23.524 2014 ISTR0="LAA00003" ISTR1="" ISTR2=""
    ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="LAA00003"       SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:46:23       5012 (0x1394)
    Retrying package LAA00003       SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:23       5012 (0x1394)
    No action specified for the package LAA00003. SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:23       5012 (0x1394)
    Start adding package to server ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\...                SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:46:23       5012 (0x1394)
    Will wait for 1 threads to end.   SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:23       5012 (0x1394)
    Attempting to add or update a package on a distribution point.               SMS_DISTRIBUTION_MANAGER               
    14/08/2014 00:46:23       5112 (0x13F8)
    The distribution point ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\ is not installed or upgraded yet.           SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:46:23       5112 (0x13F8)
    Error occurred. Performing error cleanup prior to returning.     SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:23              
    5112 (0x13F8)
    Thread Handle = 0000000000001CF0      SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:23       5012 (0x1394)
    DP thread with array index 0 ended.     SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:23       5012 (0x1394)
    DP thread with thread handle 0000000000001CF0 and thread ID 5112 ended.   SMS_DISTRIBUTION_MANAGER                14/08/2014 00:46:23      
    5012 (0x1394)
    Only retrying local DP update for package LAA00003, no need to replicate package to child sites.                SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:46:24       5012 (0x1394)
    StoredPkgVersion (1) of package LAA00003. StoredPkgVersion in database is 1.                SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:46:24       5012 (0x1394)
    SourceVersion (1) of package LAA00003. SourceVersion in database is 1.            SMS_DISTRIBUTION_MANAGER               
    14/08/2014 00:46:24       5012 (0x1394)
    STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Server1.contosoSITE=LAA PID=4288 TID=5012 GMTDATE=qui ago 14 03:46:24.068 2014 ISTR0="Configuration Manager Client Package"
    ISTR1="LAA00003" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="LAA00003" SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:46:24                5012 (0x1394)
    Failed to process package LAA00003 after 67 retries, will retry 33 more times   SMS_DISTRIBUTION_MANAGER                14/08/2014 00:46:24      
    5012 (0x1394)
    Exiting package processing thread.         SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:24      
    5012 (0x1394)
    Used 0 out of 10 allowed processing threads.   SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:29       2528 (0x09E0)
    Starting package processing thread, thread ID = 0x176C (5996) SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:29              
    2528 (0x09E0)
    Sleep 1825 seconds...    SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:29       2528 (0x09E0)
    STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Server1.contosoSITE=LAA PID=4288 TID=5996 GMTDATE=qui ago 14 03:46:29.592 2014 ISTR0="LAA00004" ISTR1="" ISTR2=""
    ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="LAA00004"       SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:46:29       5996 (0x176C)
    Retrying package LAA00004       SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:29       5996 (0x176C)
    No action specified for the package LAA00004. SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:29       5996 (0x176C)
    Start adding package to server ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\...                SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:46:29       5996 (0x176C)
    Will wait for 1 threads to end.   SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:29       5996 (0x176C)
    Attempting to add or update a package on a distribution point.               SMS_DISTRIBUTION_MANAGER               
    14/08/2014 00:46:29       4576 (0x11E0)
    The distribution point ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\ is not installed or upgraded yet.           SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:46:29       4576 (0x11E0)
    Error occurred. Performing error cleanup prior to returning.     SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:29              
    4576 (0x11E0)
    Thread Handle = 00000000000025F8       SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:29       5996 (0x176C)
    DP thread with array index 0 ended.     SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:29       5996 (0x176C)
    DP thread with thread handle 00000000000025F8 and thread ID 4576 ended.    SMS_DISTRIBUTION_MANAGER                14/08/2014 00:46:29      
    5996 (0x176C)
    Only retrying local DP update for package LAA00004, no need to replicate package to child sites.                SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:46:30       5996 (0x176C)
    StoredPkgVersion (1) of package LAA00004. StoredPkgVersion in database is 1.                SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:46:30       5996 (0x176C)
    SourceVersion (1) of package LAA00004. SourceVersion in database is 1.            SMS_DISTRIBUTION_MANAGER               
    14/08/2014 00:46:30       5996 (0x176C)
    STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Server1.contosoSITE=LAA PID=4288 TID=5996 GMTDATE=qui ago 14 03:46:30.137 2014 ISTR0="Configuration Manager Client Upgrade Package"
    ISTR1="LAA00004" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="LAA00004"             
    SMS_DISTRIBUTION_MANAGER                14/08/2014 00:46:30       5996 (0x176C)
    Failed to process package LAA00004 after 67 retries, will retry 33 more times   SMS_DISTRIBUTION_MANAGER                14/08/2014 00:46:30      
    5996 (0x176C)
    Exiting package processing thread.         SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:30      
    5996 (0x176C)
    Used 0 out of 10 allowed processing threads.   SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:35       2528 (0x09E0)
    Sleep 1825 seconds...    SMS_DISTRIBUTION_MANAGER             14/08/2014 00:46:35       2528 (0x09E0)
    Processing incoming file C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\LH810W5O.STA.   SMS_DISTRIBUTION_MANAGER             14/08/2014
    00:59:32               4008 (0x0FA8)
    Sleep 30 minutes...        SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:32       5292 (0x14AC)
    Processing STA for regular DP ["Display=\\ServerDP2.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP2.contoso\                SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:59:32       4008 (0x0FA8)
    Processing status update for package LAA00003              SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:32               
    4008 (0x0FA8)
    Used 0 out of 10 allowed processing threads.   SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:32       2528 (0x09E0)
    Sleep 1048 seconds...    SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:32       2528 (0x09E0)
    Successfully updated the package server status for ["Display=\\ServerDP2.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP2.contoso\ for package LAA00003, Status 5            
    SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:32       4008 (0x0FA8)
    Successfully delete package status file C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\LH810W5O.STA     SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:59:32               4008 (0x0FA8)
    Sleep 30 minutes...        SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:37       5292 (0x14AC)
    Used 0 out of 10 allowed processing threads.   SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:37       2528 (0x09E0)
    Sleep 1043 seconds...    SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:37       2528 (0x09E0)
    Processing incoming file C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\KAO4TLAM.STA.  SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:39              
    4008 (0x0FA8)
    Processing STA for regular DP ["Display=\\ServerDP2.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP2.contoso\                SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:59:39       4008 (0x0FA8)
    Processing status update for package LAA00004              SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:39               
    4008 (0x0FA8)
    Successfully updated the package server status for ["Display=\\ServerDP2.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP2.contoso\ for package LAA00004, Status 5            
    SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:39       4008 (0x0FA8)
    Successfully delete package status file C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\KAO4TLAM.STA    SMS_DISTRIBUTION_MANAGER            
    14/08/2014 00:59:39               4008 (0x0FA8)
    Sleep 30 minutes...        SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:42       5292 (0x14AC)
    Used 0 out of 10 allowed processing threads.   SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:42       2528 (0x09E0)
    Sleep 1038 seconds...    SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:42       2528 (0x09E0)
    Sleep 30 minutes...        SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:47       5292 (0x14AC)
    Used 0 out of 10 allowed processing threads.   SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:47       2528 (0x09E0)
    Sleep 1033 seconds...    SMS_DISTRIBUTION_MANAGER             14/08/2014 00:59:47       2528 (0x09E0)
    Sleeping for 60 minutes before content cleanup task starts.      SMS_DISTRIBUTION_MANAGER             14/08/2014 01:10:52              
    5772 (0x168C)
    Sleep 30 minutes...        SMS_DISTRIBUTION_MANAGER             14/08/2014 01:11:28       5292 (0x14AC)
    Sleep 30 minutes...        SMS_DISTRIBUTION_MANAGER             14/08/2014 01:11:33       5292 (0x14AC)
    Found notification for package 'LAA00003'          SMS_DISTRIBUTION_MANAGER             14/08/2014 01:11:33      
    2528 (0x09E0)
    Found notification for package 'LAA00004'          SMS_DISTRIBUTION_MANAGER             14/08/2014 01:11:33      
    2528 (0x09E0)
    Used 0 out of 10 allowed processing threads.   SMS_DISTRIBUTION_MANAGER             14/08/2014 01:11:33       2528 (0x09E0)
    Starting package processing thread, thread ID = 0x388 (904)      SMS_DISTRIBUTION_MANAGER             14/08/2014 01:11:33              
    2528 (0x09E0)
    Starting package processing thread, thread ID = 0x1678 (5752) SMS_DISTRIBUTION_MANAGER             14/08/2014 01:11:34              
    2528 (0x09E0)
    Sleep 3600 seconds...    SMS_DISTRIBUTION_MANAGER             14/08/2014 01:11:34       2528 (0x09E0)
    STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Server1.contosoSITE=LAA PID=4288 TID=904 GMTDATE=qui ago 14 04
    Lucas Simoes MCTS

    No (more) send requests found to process.      SMS_PACKAGE_TRANSFER_MANAGER              13/08/2014 23:57:10               
    4004 (0x0FA4)
    Waiting for new/rescheduled send requests, Maximum Sleep Time = 20 minutes                SMS_PACKAGE_TRANSFER_MANAGER             
    13/08/2014 23:57:10       4004 (0x0FA4)
    Found send request with ID: 10068, Package: LAA00003, Version:1, Priority: 2, Destination: SERVERDP1.CONTOSO, DPPriority: 200  SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:17:11       4004 (0x0FA4)
    Created sending thread (Thread ID = 0xBE8)     SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:17:11               
    4004 (0x0FA4)
    Found send request with ID: 10069, Package: LAA00004, Version:1, Priority: 2, Destination: SERVERDP1.CONTOSO, DPPriority: 200  SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:17:11       4004 (0x0FA4)
    Created sending thread (Thread ID = 0x3B4)     SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:17:11               
    4004 (0x0FA4)
    No (more) send requests found to process.      SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:17:11               
    4004 (0x0FA4)
    Waiting for new/rescheduled send requests, Maximum Sleep Time = 20 minutes                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:17:11       4004 (0x0FA4)
    Pull DP Sending thread starting for Job: 10068, package: LAA00003, Version: 1, Priority: 2, server: SERVERDP1.CONTOSO, DPPriority: 200 SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:17:35       3048 (0x0BE8)
    Pull DP Sending thread starting for Job: 10069, package: LAA00004, Version: 1, Priority: 2, server: SERVERDP1.CONTOSO, DPPriority: 200 SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:17:35       948 (0x03B4)
    STATMSG: ID=8206 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=Server1.contoso SITE=LAA PID=4288 TID=3048 GMTDATE=qui ago 14 03:17:36.046 2014 ISTR0="LAA00003" ISTR1="SERVERDP1.CONTOSO" ISTR2="" ISTR3="" ISTR4=""
    ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="LAA00003" AID1=410 AVAL1="1" AID2=404 AVAL2="SERVERDP1.CONTOSO"                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:17:36       3048 (0x0BE8)
    Sending package info bundle LAA00003 to PullDP. ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:17:36       3048 (0x0BE8)
    STATMSG: ID=8206 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=Server1.contoso SITE=LAA PID=4288 TID=948 GMTDATE=qui ago 14 03:17:36.484 2014 ISTR0="LAA00004" ISTR1="SERVERDP1.CONTOSO" ISTR2="" ISTR3="" ISTR4=""
    ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="LAA00004" AID1=410 AVAL1="1" AID2=404 AVAL2="SERVERDP1.CONTOSO"                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:17:36       948 (0x03B4)
    Sending package info bundle LAA00004 to PullDP. ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:17:36       948 (0x03B4)
    Repairing PullDP, check \\SERVERDP1.CONTOSO\SMS_DP$\sms\logs\pulldp_repair.log                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:17:45       3048 (0x0BE8)
     PullDP Notification failed. Failure count = 28/30, Restart time = 14/08/2014 00:37:45 E. South America Standard Time                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:17:45       3048 (0x0BE8)
    STATMSG: ID=8211 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=Server1.contoso SITE=LAA PID=4288 TID=3048 GMTDATE=qui ago 14 03:17:45.880 2014 ISTR0="LAA00003" ISTR1="1" ISTR2="SERVERDP1.CONTOSO" ISTR3="" ISTR4=""
    ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="LAA00003" AID1=410 AVAL1="1" AID2=404 AVAL2="["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\"               
    SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:17:45       3048 (0x0BE8)
    Pull DP Sending thread complete            SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:17:45      
    3048 (0x0BE8)
    No (more) send requests found to process.      SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:17:45               
    4004 (0x0FA4)
    Waiting for new/rescheduled send requests, Maximum Sleep Time = 20 minutes                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:17:45       4004 (0x0FA4)
    Repairing PullDP, check \\SERVERDP1.CONTOSO\SMS_DP$\sms\logs\pulldp_repair.log                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:17:52       948 (0x03B4)
     PullDP Notification failed. Failure count = 28/30, Restart time = 14/08/2014 00:37:52 E. South America Standard Time                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:17:52       948 (0x03B4)
    STATMSG: ID=8211 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=Server1.contoso SITE=LAA PID=4288 TID=948 GMTDATE=qui ago 14 03:17:52.923 2014 ISTR0="LAA00004" ISTR1="1" ISTR2="SERVERDP1.CONTOSO" ISTR3="" ISTR4=""
    ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="LAA00004" AID1=410 AVAL1="1" AID2=404 AVAL2="["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\"               
    SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:17:52       948 (0x03B4)
    Pull DP Sending thread complete            SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:17:52      
    948 (0x03B4)
    No (more) send requests found to process.      SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:17:52               
    4004 (0x0FA4)
    Waiting for new/rescheduled send requests, Maximum Sleep Time = 20 minutes                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:17:52       4004 (0x0FA4)
    Found send request with ID: 10068, Package: LAA00003, Version:1, Priority: 2, Destination: SERVERDP1.CONTOSO, DPPriority: 200  SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:37:52       4004 (0x0FA4)
    Created sending thread (Thread ID = 0x1680)   SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:37:52               
    4004 (0x0FA4)
    Found send request with ID: 10069, Package: LAA00004, Version:1, Priority: 2, Destination: SERVERDP1.CONTOSO, DPPriority: 200  SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:37:53       4004 (0x0FA4)
    Created sending thread (Thread ID = 0x18A4)   SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:37:53               
    4004 (0x0FA4)
    No (more) send requests found to process.      SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:37:53               
    4004 (0x0FA4)
    Waiting for new/rescheduled send requests, Maximum Sleep Time = 20 minutes                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:37:53       4004 (0x0FA4)
    Pull DP Sending thread starting for Job: 10068, package: LAA00003, Version: 1, Priority: 2, server: SERVERDP1.CONTOSO, DPPriority: 200 SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:38:16       5760 (0x1680)
    Pull DP Sending thread starting for Job: 10069, package: LAA00004, Version: 1, Priority: 2, server: SERVERDP1.CONTOSO, DPPriority: 200 SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:38:17       6308 (0x18A4)
    STATMSG: ID=8206 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=Server1.contoso SITE=LAA PID=4288 TID=6308 GMTDATE=qui ago 14 03:38:20.098 2014 ISTR0="LAA00004" ISTR1="SERVERDP1.CONTOSO" ISTR2="" ISTR3="" ISTR4=""
    ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="LAA00004" AID1=410 AVAL1="1" AID2=404 AVAL2="SERVERDP1.CONTOSO"                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:38:20       6308 (0x18A4)
    STATMSG: ID=8206 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=Server1.contoso SITE=LAA PID=4288 TID=5760 GMTDATE=qui ago 14 03:38:20.111 2014 ISTR0="LAA00003" ISTR1="SERVERDP1.CONTOSO" ISTR2="" ISTR3="" ISTR4=""
    ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="LAA00003" AID1=410 AVAL1="1" AID2=404 AVAL2="SERVERDP1.CONTOSO"                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:38:20       5760 (0x1680)
    Sending package info bundle LAA00004 to PullDP. ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:38:20       6308 (0x18A4)
    Sending package info bundle LAA00003 to PullDP. ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:38:20       5760 (0x1680)
    Repairing PullDP, check \\SERVERDP1.CONTOSO\SMS_DP$\sms\logs\pulldp_repair.log                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:38:43       6308 (0x18A4)
     PullDP Notification failed. Failure count = 29/30, Restart time = 14/08/2014 00:58:43 E. South America Standard Time                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:38:43       6308 (0x18A4)
    STATMSG: ID=8211 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=Server1.contoso SITE=LAA PID=4288 TID=6308 GMTDATE=qui ago 14 03:38:43.622 2014 ISTR0="LAA00004" ISTR1="1" ISTR2="SERVERDP1.CONTOSO" ISTR3="" ISTR4=""
    ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="LAA00004" AID1=410 AVAL1="1" AID2=404 AVAL2="["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\"               
    SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:38:43       6308 (0x18A4)
    Pull DP Sending thread complete            SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:38:43      
    6308 (0x18A4)
    No (more) send requests found to process.      SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:38:43               
    4004 (0x0FA4)
    Waiting for new/rescheduled send requests, Maximum Sleep Time = 20 minutes                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:38:43       4004 (0x0FA4)
    Repairing PullDP, check \\SERVERDP1.CONTOSO\SMS_DP$\sms\logs\pulldp_repair.log                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:38:50       5760 (0x1680)
     PullDP Notification failed. Failure count = 29/30, Restart time = 14/08/2014 00:58:50 E. South America Standard Time                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:38:50       5760 (0x1680)
    STATMSG: ID=8211 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=Server1.contoso SITE=LAA PID=4288 TID=5760 GMTDATE=qui ago 14 03:38:50.708 2014 ISTR0="LAA00003" ISTR1="1" ISTR2="SERVERDP1.CONTOSO" ISTR3="" ISTR4=""
    ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="LAA00003" AID1=410 AVAL1="1" AID2=404 AVAL2="["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\"               
    SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:38:50       5760 (0x1680)
    Pull DP Sending thread complete            SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:38:50      
    5760 (0x1680)
    No (more) send requests found to process.      SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:38:50               
    4004 (0x0FA4)
    Waiting for new/rescheduled send requests, Maximum Sleep Time = 20 minutes                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:38:50       4004 (0x0FA4)
    Found send request with ID: 10068, Package: LAA00003, Version:1, Priority: 2, Destination: SERVERDP1.CONTOSO, DPPriority: 200  SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:58:50       4004 (0x0FA4)
    Created sending thread (Thread ID = 0xF28)      SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:58:50               
    4004 (0x0FA4)
    Found send request with ID: 10069, Package: LAA00004, Version:1, Priority: 2, Destination: SERVERDP1.CONTOSO, DPPriority: 200  SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:58:50       4004 (0x0FA4)
    Created sending thread (Thread ID = 0x11D0)   SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:58:50               
    4004 (0x0FA4)
    No (more) send requests found to process.      SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:58:50               
    4004 (0x0FA4)
    Waiting for new/rescheduled send requests, Maximum Sleep Time = 20 minutes                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:58:50       4004 (0x0FA4)
    Pull DP Sending thread starting for Job: 10068, package: LAA00003, Version: 1, Priority: 2, server: SERVERDP1.CONTOSO, DPPriority: 200 SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:59:15       3880 (0x0F28)
    Pull DP Sending thread starting for Job: 10069, package: LAA00004, Version: 1, Priority: 2, server: SERVERDP1.CONTOSO, DPPriority: 200 SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:59:15       4560 (0x11D0)
    STATMSG: ID=8206 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=Server1.contoso SITE=LAA PID=4288 TID=3880 GMTDATE=qui ago 14 03:59:16.990 2014 ISTR0="LAA00003" ISTR1="SERVERDP1.CONTOSO" ISTR2="" ISTR3="" ISTR4=""
    ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="LAA00003" AID1=410 AVAL1="1" AID2=404 AVAL2="SERVERDP1.CONTOSO"                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:59:16       3880 (0x0F28)
    Sending package info bundle LAA00003 to PullDP. ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:59:17       3880 (0x0F28)
    STATMSG: ID=8206 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=Server1.contoso SITE=LAA PID=4288 TID=4560 GMTDATE=qui ago 14 03:59:17.845 2014 ISTR0="LAA00004" ISTR1="SERVERDP1.CONTOSO" ISTR2="" ISTR3="" ISTR4=""
    ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="LAA00004" AID1=410 AVAL1="1" AID2=404 AVAL2="SERVERDP1.CONTOSO"                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:59:17       4560 (0x11D0)
    Sending package info bundle LAA00004 to PullDP. ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:59:17       4560 (0x11D0)
    Repairing PullDP, check \\SERVERDP1.CONTOSO\SMS_DP$\sms\logs\pulldp_repair.log                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:59:27       3880 (0x0F28)
     Attempted max retry count. The job would be marked for deletion now.                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:59:27       3880 (0x0F28)
    Sent status to the distribution manager for pkg LAA00003, version 1, status 5 and distribution point ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\               
    SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:59:27       3880 (0x0F28)
    STATMSG: ID=8207 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=Server1.contoso SITE=LAA PID=4288 TID=3880 GMTDATE=qui ago 14 03:59:27.291 2014 ISTR0="LAA00003" ISTR1="SERVERDP1.CONTOSO" ISTR2="" ISTR3="" ISTR4=""
    ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="LAA00003" AID1=410 AVAL1="1" AID2=404 AVAL2="SERVERDP1.CONTOSO"                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:59:27       3880 (0x0F28)
    STATMSG: ID=8211 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=Server1.contoso SITE=LAA PID=4288 TID=3880 GMTDATE=qui ago 14 03:59:27.305 2014 ISTR0="LAA00003" ISTR1="1" ISTR2="SERVERDP1.CONTOSO" ISTR3="" ISTR4=""
    ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="LAA00003" AID1=410 AVAL1="1" AID2=404 AVAL2="["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\"               
    SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:59:27       3880 (0x0F28)
    Pull DP Sending thread complete            SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:59:27      
    3880 (0x0F28)
    No (more) send requests found to process.      SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:59:27               
    4004 (0x0FA4)
    Waiting for new/rescheduled send requests, Maximum Sleep Time = 20 minutes                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:59:27       4004 (0x0FA4)
    Repairing PullDP, check \\SERVERDP1.CONTOSO\SMS_DP$\sms\logs\pulldp_repair.log                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:59:34       4560 (0x11D0)
     Attempted max retry count. The job would be marked for deletion now.                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:59:34       4560 (0x11D0)
    Sent status to the distribution manager for pkg LAA00004, version 1, status 5 and distribution point ["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\               
    SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:59:34       4560 (0x11D0)
    STATMSG: ID=8207 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=Server1.contoso SITE=LAA PID=4288 TID=4560 GMTDATE=qui ago 14 03:59:34.335 2014 ISTR0="LAA00004" ISTR1="SERVERDP1.CONTOSO" ISTR2="" ISTR3="" ISTR4=""
    ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="LAA00004" AID1=410 AVAL1="1" AID2=404 AVAL2="SERVERDP1.CONTOSO"                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:59:34       4560 (0x11D0)
    STATMSG: ID=8211 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=Server1.contoso SITE=LAA PID=4288 TID=4560 GMTDATE=qui ago 14 03:59:34.337 2014 ISTR0="LAA00004" ISTR1="1" ISTR2="SERVERDP1.CONTOSO" ISTR3="" ISTR4=""
    ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="LAA00004" AID1=410 AVAL1="1" AID2=404 AVAL2="["Display=\\ServerDP1.contoso\"]MSWNET:["SMS_SITE=LAA"]\\ServerDP1.contoso\"               
    SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:59:34       4560 (0x11D0)
    Pull DP Sending thread complete            SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:59:34      
    4560 (0x11D0)
    No (more) send requests found to process.      SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 00:59:34               
    4004 (0x0FA4)
    Waiting for new/rescheduled send requests, Maximum Sleep Time = 20 minutes                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 00:59:34       4004 (0x0FA4)
    No (more) send requests found to process.      SMS_PACKAGE_TRANSFER_MANAGER              14/08/2014 01:19:34               
    4004 (0x0FA4)
    Waiting for new/rescheduled send requests, Maximum Sleep Time = 20 minutes                SMS_PACKAGE_TRANSFER_MANAGER             
    14/08/2014 01:19:34       4004 (0x0FA4)
    No (more) send requests found to process.     
    SMS_PACKAGE_TRANSFER_MANAG
    Lucas Simoes Rezende MCP, MCTS , ITIL V3

  • Issues distributing large content to pull DPs

    I am having issues trying to distribute big files to PULL DPs.  All other packages are going through fine.  But when I try to ditribute wim files over 4Gb, they never start downloading.  The pull site shows a bits.tmp stub file the size of
    the actual file.  The dataTransferService.log shows ErrorCode 0x80004005.
    I initially thought it might be because my pull dp is running on a win2k3 server (using iis 6), but I tried distributing to a test windows 7 pull dp setup and got the same result.  WAIK tools for win7 has been installed on the pullDP and its proper
    DLLs are in the system32 folder.
    I have been able to distribute wim file of roughly 3.7Gb and lower but nothing over that to pull DPs.  If I make these regular DPs instead of pull DPs, everyone works fine.  This and the fact that all other packages are working fine tells me permissions
    and boundaries are not the issue.  WebDav authoring rule is set to allow read to all content to all users as well.
    My site server is running SCCM 2012 R2 with CU1 running on win2008 R2 (so iis 7.5) and I updated the client on my pull DP as well.
    Bitsadmin does not give me much more to work on.  State: Transient_error with no progress on byte count.  error code : 0x80004005 Unspecified error and error context: 0x00000005 the error occurred while the remote file was being processed.
    I have also modified the applicationHost.config file to allow all types of file extentions in the requestFiltering section, on the remote chance this was blocking somehow.  This type of issue seems to creep up sometime during the transfer, not before.
    One other test I made was to distribute iso files as packages instead of wim files under operating system images.  I had the same results with large iso files as I did with wim files.
    Things seem to point at some weird type of 4Gb package limit for a pull DP.  Either an issue with settings on my site server or with the CCM client itself.
    I am running out of ideas and was wondering if anyone has had this issue and has resolved it.

    This is a known issue for SCCM 2012. A official fix will be released in the near future. If you want to test instantly, contact CSS to open a case to get a test fix.
    There is a KB for this issue (English not available currently)
    http://support.microsoft.com/kb/2927111/fr
    Juke Chou
    TechNet Community Support

  • SCCM 2012 -OS images not transfering to DP ERROR Detail will be available when server finishes processing the message

    I am having issue with some application, packages, and images pushing from my Primary SCCM server to the secondary servers and DPs.
    I am thinking that the issues are all related so I am going to just talk about the image that I am having a problem with push.
    The image has successfully transfered to the Primary site, and secondary sites, but it is having a problem with a DP. The error that shows up in "Content Status" says "Detail will be available when server finishes processing the
    messages". All the servers are 2008 R2 server, with SCCM 2012 SP1.
    I would take a look at logs for this, but I am pretty new to SCCM, and I'm not sure which log to look at for additional information.
    Thank you for any help that can be provided.

    The logs pointed me to an error about the Pull DP settings. I think the issue is that I have the images stored on the Primary site, and the DP does not have the Primary site in its Pull DP settings tab. I unchecked the option, and it appears to be working
    now. Thank you

  • SCEP going out to the internet after being migrated to SCCM 2012 and saturating facility MPLS.

    I was unaware of the fact that SCEP was gonig out to the internet to pull down 120 megs worth of data each time a client is migrated. I'm trying to determine the easiest or best way to avoid this. I've done some research and it looks like bundeling the SCEP
    policy with the migration package might work. I also saw some tool that you can use to add a SCEP update rollup to the package. Ultimately if i could just get the exact URL the clients are going out to our networking team could apply QoS to this URL. Unfortunately
    though it appears in the MPCMDRUN.log to go to go.microsoft.com/fwlink, but on the networking side in pathview i seen the client ends up going to Akamai.
    I'm assuming MS offloads their web traffic to Akamai and that first link is redirected, if that is even the right link. Does anyone know a way i can prevent this while still getting the client up to date. This entire time I thought the clients would pull
    what they needed from the SCCM 2012 env. I'm using ADR to push the definitions and that seems to be working fine except for 2 situations. One a client is migrated, or 2 the client comes online after being offline for more than 7 days and goes out.
    Either way if someone could provide me with the URL for throttling or a better method for deploying I would be very grateful. So far we've migrated about 8 thousand clients and have about another 10 thousand to go. The majority of the clients have local
    pull DPs, and if further details of my infrastructure would be helpful please just let me know.
    Thanks,
    -KR

    Jorgen,
    I appreciate you pointing out the setting and that has helped partially and I was able to track down the URL that is being used by the clients for QoS by networking. Now management has pushed back with why are the clients going to the internet at all. I
    can understand why. If were deploying all the patches why can't the clients pull their SCEP engine from the SUP/WSUS server. I see it finding it in the MPCMDRUN.Log file but it still goes out to Microsoft to pull the 120 meg file. Do i not have any other options
    for pushing the engine to the clients, if ADR is working for current clients what am i missing. I'm sure its something obvious, but my migration is on hold up until I can keep the clients from going to the internet for their new engine and deltas. 
    Any help you could provide i would very much appreciate. Thanks again Jorgen.
    -Sam Kachar

  • SCCM 2012 R2 CU2 - Unable to deploy or configure PullDP's

    After upgrading to SCCM 2012 R2 CU2, I'm not able anymore to promote new Distribution Points acting as Pull DP's with the source servers set. This was configured and worked as expected under SCCM 2012 R2 CU1 where the 2 DP's were setup as PullDP's. After
    Upgrade to 2012 R2 CU2, I decided to switch everything over to use HTTPS instead of HTTP as it is getting closer to production. In this process I uninstalled a DP and tried to promote it back, yet when I try to select a DP as source, it lists none.
    Venturing a bit ahead, if I try to modify the PullDP's on the one that upgraded to SSL as expected, this also appears to be "broken" if I strip away the single DP it has and add in a new, so this change has not been applied to it.
    After sleeping on it, I decied to try to do this via PowerShell instead, to no avail.
    Output of powershell:
    PS BKA:\> Set-CMDistributionPoint -SiteCode 'ABC' -SiteSystemServerName 'RemotePullDPFQDN' -EnablePullDP $true -SourceDistributionPoints 'PrimarySiteServerFQDN' -SourceDPRanks 1WARNING: One or more source distribution points are invalid.Set-CMDistributionPoint : Validation of input parameters failed. Cannot continue.At line:1 char:1+ Set-CMDistributionPoint -SiteCode 'ABC' -SiteSystemServerName 'RemotePullDPFQDN ...+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
       + CategoryInfo          : InvalidArgument: (Microsoft.Confi...ionPointCommand:SetDistributionPointCommand) [Set-CMDistributionPoint], InvalidOperationException   + FullyQualifiedErrorId : ValidationError,Microsoft.ConfigurationManagement.Cmdlets.HS.Commands.SetDistributionPointCommand
    The DP's are also MP and FSP's for the purpose in a "remote" untrusted forest, this is for them to have localized content available to lessen the load on the firewalls AND the Primary Site Server itself (6000+ laptops and desktops).
    Any thoughtson how to promote the PullDP back?

    http://social.technet.microsoft.com/Forums/en-US/72847bfc-c529-449c-a6b3-d7ce6bfcc8bb/how-to-set-an-https-distribution-point-as-a-source-dp-for-pull-dps?forum=configmanagergeneral
    Torsten Meringer | http://www.mssccmfaq.de

  • SCCM 2012 R2 Uprade - Database Concerns

    I recently completed the R2 upgrade process on my production environment. Everything appeared to complete successfully. No errors, warnings, or issues aside from this RBAC mishap -
    SCCM 2012 R2 Reporting error
    After some further usage I'm finding some inconsistencies in my reporting data. Here's an example:
    A software deployment went out last week to my users. This was a simple application upgrade, moving from 1 version to the next.
    On multiple computers I can see the deployment was received and installed successfully. If I open Programs and Features I can see the software version has been updated.
    From there I open the ConfigMgr console and fire up resource explorer. On multiple computers I can see a recent software scan has picked up the new software and it is reflected in resource explorer.
    Now comes the DB issue - I run a manual DB query using the ADD_REMOVE_PROGRAMS table and it consistently shows me the outdated software version. This table is giving me incorrect data. Here's an example of the query I'm using:
    SELECT dbo.v_R_System.Name0, dbo.v_R_System.User_Name0, dbo.v_GS_ADD_REMOVE_PROGRAMS.DisplayName0,
    dbo.v_GS_ADD_REMOVE_PROGRAMS.Version0
    FROM dbo.v_R_System INNER JOIN
    dbo.v_GS_ADD_REMOVE_PROGRAMS ON dbo.v_R_System.ResourceID = dbo.v_GS_ADD_REMOVE_PROGRAMS.ResourceID
    WHERE (dbo.v_GS_ADD_REMOVE_PROGRAMS.DisplayName0 LIKE N'%Symantec Enterprise Vault%') AND (dbo.v_R_System.Name0 LIKE N'%testcomputer')
    Is there something I'm missing? Why would resource explorer have accurate data and the database be returning outdated info? Appreciate any insight. Thanks!

    @Idan
    Great point! I checked my last hardware inventory and it was back in December! Yikes! I pulled up my workstation policy and got hit with an ugly error as reported in
    this thread. At the moment I'm rebuilding my workstation policy and will see if that resolves hardware inventory.
    @ Garth
    The application I'm reporting on is 32-bit. This is primarily why I didn't expand to include 64-bit programs.

Maybe you are looking for

  • How many devices can you update on the $20 New Lion?

    I have 10 apple devices in my home.  How many $20 Lion updates must I purchase?

  • HP Stream 7 with Windows 8.1 - something jams wifi

    Ok, I saw the other post about sleep mode and Windows 8.1 knocking all devices offline, and I'm having similar problem, but not sure it's related to sleep mode. I had setup my Stream 7, and hadn't updated the BIOS, so I got it working, playing with i

  • Oracle Portal Redirection

    Hi, I am running a form. I want to display an error message when a record with a certain criteria is existing. I have created a label - error_label (not related to any tables). In the Save button of the Form I have written the following code: p_sessi

  • Problems with a result in a switch/case control statement

    I am having troubles with a switch/case statement in which I am trying to get a result returned from different operators. The problem is that the result always returns 0 no matter what I put in the driver class. The class where the result needs to be

  • I've a problem with QuickTime controlbar when I use transparent wmode

    Hello All, I've a problem with QuickTime controlbar. When I use this code : <object height="592" width="690" codebase="http://www.apple.com/qtactivex/qtplugin.cab#version=6,0,2,0" classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B"> <param value="ht