[SCCM 2012 R2] Re-using site code

Hi All,
I have a situation where I need to uninstall SCCM Primary Site because of wrong server name convention. SCCM 2012 documentation do not mention of reusing site code after previous site uninstallation.
Is it possible to use same Site Code for new primary site after uninstall old one?
SCCM 2007 Documentation: Site codes should never be used more than once in a Configuration Manager 2007 hierarchy for active sites. If you have uninstalled a site that was publishing site data to Active Directory Domain Services in preparation for installing
a new Configuration Manager 2007 site with the same site code, you should ensure that the previous site's information has been removed from Active Directory Domain Services, and possibly WINS, before use the old site code for a new Configuration Manager 2007
site. All references to the original site need to be removed from all other sites in the hierarchy, and you need to clean up any objects previously replicated to potential child sites of the new site. If this is not done, any newly replicated objects from
the newly created site could overwrite objects already replicated to the child sites by the previous installation.
SCCM 2012 Documentation: Site codes cannot be used more than one time in a Configuration Manager hierarchy for a central administration site or primary sites. If you reuse a site code, you run the risk of having object ID conflicts in your Configuration
Manager hierarchy. You can reuse the site code for a secondary site if it is no longer in use in your Configuration Manager hierarchy or in the Active Directory forest.
Thank you in advance.
Regards,

I have a CAS (CAS) and One Primary site (AU1) connected to CAS.
I want to install second Primary site (EU1) connected to same CAS (CAS). Server name for EU1 Primary site is wrong and guys that are higher in hierarchy than me want from me to fix the server name.
Reason for everything is always: Politics
So you know that you are begging for trouble by having a CAS. You do also know that all the administration should be done ONLY on the CAS and nowhere else.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

Using a custom certificate store for SCCM 2012 clients and primary site server

I have read what seems to be all the pki related documentation out there for SCCM 2012. I have a PKI infrastructure up and running issueing certificates with an offline root through group policy autoenrollment. The problem that i'm faced with is we are migrating
from SCCM 2007 that was in native mode and we chose not to use the CA that we used for the old SCCM environment. When the clients attempt to communicate with the M.P. it runs through all of the different certificates and adds a tremendous amount of overhead
to the M.P. We will have ten's of thousands of clients by migration end. Could someone please point me to a document that goes over how to leverage a custom certificate store that I could then tell the new 2012 environment to use? I know that it's in there,
I've seen it in the console. The setup is one primary site server with SQL on box and the pki I just mentioned as well as the old 2007 environment that is still live.
I read that you can try and use SAN as a method of identifying the new certs but I haven't found a good document covering exactly how that works. Any info you could provide I would be very grateful for. Thanks.

Jason, thank you for your reply. I'm getting the impression that you have never been in the situation where you had to deal with 2 different PKI environments. Let me state that I understand what your saying about trust. We have to configure the trusted root
CA via GPO. That simply isn't enough, and I have a valid example to backup this claim. When the new clients got the advertisement and began the ccmsetup process I used the /pki switch among others. What the client end up doing was selecting a certificate that
had the longest validity period which was issued by our old CA. It checked the authentication chain, found it to be valid and selected it for communication. At that point the installation failed, period, no caveats as you say. The reason the install failed
because the new PKI infrastructure is integrated into the new environment, and the old is not. So when you said " that
are trusted and they can use *any* cert that is trusted because at the end of the day, there is no
difference between two valid certs that have the same purpose as long as they are trusted. "
that is not correct. Both certs are trusted, and use the same certificate template, but only one certificate would allow the install to complete successfully.
Once I started using the CCMCERTISSUERS
switch the client install went swimmingly. The only reason I'm still debating this point is because someone might read this thread see your comments and assume "well I've got my new PKI configured as a trusted root CA, I should be all set" and their
deployment will fail, just as my pilot did.
About Intune I'm looking forward to doing a POC in the lab i built with my Note 3. I'm hoping it goes well as I really want to have our MDM migrated into ConfigMgr... I think the
biggest obstacle outside of selling it to management will be the actual device migration from the current MDM solution. From what I understand of the enrollment process manual install and config is the only path forward.
Thanks Jason for your post and discussion.

SCCM clients automatically changes its site code to another

Hi,
We are running SCCM 2012 in windows server 2008 R2 . We have different sites based on different countries, eg: India, UK and US. My issue is that some of the clients which were reporting to a site is automatically changes its reporting to some other
site. Considering the above countries, I must say that the clients which were reporting to India(IND) is now showing its site code(site assigned) as UK in console. This makes the clients to not to communicate with our server and 'Client activity' is not
showing any status(just blank). Initially I have reinstalled those clients and those were showing correct site code. After few days some among the reinstalled ones and few other clients are again reporting its site code to UK. What might be the issue?
Your suggestions are most appreciated.
Quite strange thing is that when I checked the configuration manager in client side it is showing the correct site code and reporting to the correct server.

Either someone pushed the client from the wrong site or there's a GPO in place that reassigns them. CM clients won't automatically reasign themselves.
Torsten Meringer | http://www.mssccmfaq.de

SCCM 2012 R2 Report using WMI Query

I am trying to find out if I can generate a report to show which users installed what software using a report in SCCM 2012 R2 and a WMI Query.
If not using the reporting within SCCM, then:
1) is it possible to pull such data via a wmi query
2) any suggestions how to do so?
3) Desktop OS is either Windows 7 or 8 or 8.1 Enterprise x64
Thanks,
Dave
David Lakey

You Can Create Query With the Software name but you can Know Which Computer and you can add System Resource as the Last login name
This for Example:-
From monitoring--> Create New Query--> Edit Query Statement --> Show Query Language
past the following:-
select SMS_R_System.NetbiosName,
SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from
SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on
SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceId =
SMS_R_System.ResourceId where
SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName like "%Visio%"
After that in General you can add in Results Tap:-
System Source and the Attribute Will be last Login name

SCCM 2012 Offline Servicing used, but still installed during Task Sequence

I have a SCCM 2012 SP1 CU4 environment and I updated my Windows 7 Enterprise x64 image install.wim with all security patches using Offline Servicing..a nice feature...works perfectly.
But when using this new updated image in my Task Sequence I noticed that still 150+ patches are installed during the Install Updates phase in my task sequence. More then 130 of them are already added using Offline Servicing so why are they added again
What is going wrong here....what am i missing....

I am having a similar issue, however I have updated my dp and it still occurs. I am doing an offline service of Windows 8.1. The update status shows a bunch of updates that have been installed, yet when deploying my TS it sill installs about 70 or 80 updates.
I have compared and the updates that are being installed are listed in the updates status window. I have checked the OfflineServicingMgr.log and the only error is:
Deleting file \\?\C:\ConfigMgr_OfflineImageServicing\UCO00121\ImageMountDir\Admin Desktop Wallpaper.JPG, FAILED, Win32 Error = 1168
Failed to remove the staging folder C:\ConfigMgr_OfflineImageServicing, GLE = 1168
It seems everything else completes fine so i cannot determine if this is causing my issues? Has anyone else had this problem before? I haven't tried with Windows 7 as we are no longer using it.

Distribute Customer Updates in SCCM 2012 (CU's) using a Task Sequence

I want to utilize a Task Sequence to Distribute Customer Updates to SCCM 2012 Clients. I currently have 2 collections for pre-CU 4 clients, one for 32 Bit Clients (x86) , one for 64 Bit Clients (x64). I have a package pertinent to each collection
which I use to distribute the updates.
However, instead of segregating them by collection, I would like to have one big collection, and have the Task Sequence sort out which package should load on which collection.
I've tried using the RUN COMMAND LINE, and INSTALL PACKAGE options to no avail. Is there a way to utilize a Task Sequence for this undertaking, or should I just continue the way I'm currently doing it.
Thanks ,
Dan

You can set Collection Variables for the two collections, then add running condition in the Task Sequence Steps for corresponding collections.
Juke Chou
TechNet Community Support

Endpoint Protection clients no getting updates from SCCM 2012 in new Secondary Site

I recently stood up a secondary site behind a PCI firewall to manage PCI in-scope systems. All of my boundaries are properly configured and there are no overlaps. I am able to push packages to these clients and the clients are reporting as healthy however
I am not able to get updates to the SCEP clients. There is no internet access from these systems so I have to rely on updates from SCCM. From what I can see in the WindowsUpdate log it is only trying to go to Microsoft for the definitions. Here is the Log:
2014-04-30 11:05:09:739
828 da8
Misc WARNING: Send failed with hr = 80072ee2.
2014-04-30 11:05:09:739
828 da8
Misc WARNING: Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <None>
2014-04-30 11:05:09:739
828 da8
Misc WARNING: Send request failed, hr:0x80072ee2
2014-04-30 11:05:09:739
828 da8
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=41&L=en-US&P=&PT=0x7&WUA=7.9.9600.16422>.
error 0x80072ee2
2014-04-30 11:05:09:739
828 da8
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2014-04-30 11:05:09:739
828 da8
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-04-30 11:05:09:739
828 da8
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-04-30 11:05:09:739
828 da8
SLS FATAL: GetResponse failed with hresult 0x80072ee2...
2014-04-30 11:05:09:739
828 da8
EP FATAL: EP: CSLSEndpointProvider::GetWUClientDataAndInitParser - failed to get SLS data, error = 0x80072EE2
2014-04-30 11:05:09:739
828 da8
EP FATAL: EP: CSLSEndpointProvider::GetEndpointFromSLS - Failed to get client data and init parser, error = 0x80072EE2
2014-04-30 11:05:09:739
828 da8
EP FATAL: Failed to obtain 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL, error = 0x80072EE2
2014-04-30 11:05:09:739
828 da8
Agent WARNING: Failed to obtain the authorization cab URL for service 7971f918-a847-4430-9279-4a52d1efe18d, hr=0
2014-04-30 11:05:09:739
828 da8
Agent FATAL: Caller <NULL> failed to opt in to service 7971f918-a847-4430-9279-4a52d1efe18d, hr=0X80072EE2
2014-04-30 11:05:09:739
828 da8
SLS Retrieving SLS response from server...
2014-04-30 11:05:09:739
828 da8
SLS Making request with URL HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=41&L=en-US&P=&PT=0x7&WUA=7.9.9600.16422
2014-04-30 11:05:30:742
828 da8
Misc WARNING: Send failed with hr = 80072ee2.
2014-04-30 11:05:30:742
828 da8
Misc WARNING: Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <None>
2014-04-30 11:05:30:742
828 da8
Misc WARNING: Send request failed, hr:0x80072ee2
2014-04-30 11:05:30:742
828 da8
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=41&L=en-US&P=&PT=0x7&WUA=7.9.9600.16422>.
error 0x80072ee2
2014-04-30 11:05:30:742
828 da8
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2014-04-30 11:05:30:742
828 da8
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-04-30 11:05:30:742
828 da8
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-04-30 11:05:30:742
828 da8
SLS FATAL: GetResponse failed with hresult 0x80072ee2...
2014-04-30 11:05:30:742
828 da8
EP FATAL: EP: CSLSEndpointProvider::GetWUClientDataAndInitParser - failed to get SLS data, error = 0x80072EE2
2014-04-30 11:05:30:742
828 da8
EP FATAL: EP: CSLSEndpointProvider::GetSecondaryServicesEnabledState - Failed to get client data and init parser, error = 0x80072EE2
2014-04-30 11:05:30:742
828 da8
Agent   * WARNING: Online service registration/service ID resolution failed, hr=0x80248014
2014-04-30 11:05:30:742
828 da8
Agent   * WARNING: Exit code = 0x80248014
2014-04-30 11:05:30:742
828 da8
Agent *********
2014-04-30 11:05:30:742
828 da8
Agent ** END ** Agent: Finding updates [CallerId = System Center Endpoint Protection (DDEFDD14-250E-4DC8-A0B3-9D667EC5D8EB) Id = 9]
2014-04-30 11:05:30:742
828 da8
Agent *************
2014-04-30 11:05:30:742
828 da8
Agent WARNING: WU client failed Searching for update with error 0x80248014
2014-04-30 11:05:30:742
828 da8
IdleTmr WU operation (CSearchCall::Init ID 9, operation # 99) stopped; does use network; is not at background priority
2014-04-30 11:05:30:742
828 da8
IdleTmr Decremented PDC RefCount for Network to 0
2014-04-30 11:05:30:742
828 da8
IdleTmr Decremented idle timer priority operation counter to 0
2014-04-30 11:05:30:743
576 12c0
COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = System Center Endpoint Protection (DDEFDD14-250E-4DC8-A0B3-9D667EC5D8EB)]
2014-04-30 11:05:30:743
576 12c0
COMAPI   - Updates found = 0
2014-04-30 11:05:30:743
576 12c0
COMAPI   - WARNING: Exit code = 0x00000000, Result code = 0x80248014
2014-04-30 11:05:30:743
576 12c0
COMAPI ---------
2014-04-30 11:05:30:743
576 12c0
COMAPI -- END -- COMAPI: Search [ClientId = System Center Endpoint Protection (DDEFDD14-250E-4DC8-A0B3-9D667EC5D8EB)]
2014-04-30 11:05:30:743
576 12c0
COMAPI -------------
2014-04-30 11:05:30:743
576 1254
COMAPI WARNING: Operation failed due to earlier error, hr=80248014
2014-04-30 11:05:30:743
576 1254
COMAPI FATAL: Unable to complete asynchronous search. (hr=80248014)
The log is from a Server 2012 R2 Client. The only thing I was able to find was this Article which did not resolve my issue. Anyone else encounter anything similar? Any help would be appreciated.
Regards, Evan Mills - Systems Administrator

Every two hours is too aggressive for the ADR. Definitions are only released 2-3 times a day so every 8 hours is what most consider best practice. Is your WSUS sync occurring every two hours as well? If not, then the ADR wouldn't have anything new to pick
up anyway. It's best to set the WSUS sync for every 8 hours and then set the ADR to run after any successful WSUS sync.
So the EP definitions are caching but not installing? What does the WUAHandler.log show? One of my machines shows the following which indicates a successful installation from the ConfigMgr delivered update:
1. Update (Missing): Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.173.933.0) (0a156122-d4f8-4215-9e63-8f0f1e32c9c6, 200)   WUAHandler   4/30/2014 6:49:33 AM   11080 (0x2B48)
Async installation of updates started.   WUAHandler   4/30/2014 6:49:34 AM   11080 (0x2B48)
Update 1 (0a156122-d4f8-4215-9e63-8f0f1e32c9c6) finished installing (0x00000000), Reboot Required? No   WUAHandler   4/30/2014 6:50:23 AM   8664 (0x21D8)
Async install completed.   WUAHandler   4/30/2014 6:50:23 AM   8664 (0x21D8)
Installation of updates completed.   WUAHandler   4/30/2014 6:50:23 AM   11032 (0x2B18)
It sounds like if you set "Check for Endpoint Protection definitions at a specific interval" to 0 then it would prevent the WindowsUpdate.log activity you're seeing when the EP client tries to reach out for updates.

SCCM 2012 Clients at Secondary Site don't update and shows status as INACTIVE

I have 1 Primary site and 1 Secondary sites. I have setup Secondary site Boundaries using IP subnet. I see that the systems from secondary
site show in the console and they all have clients installed but however 60% of the system shows client activity as INACTIVE and not receiving any heartbeat DDR none of the system showing hardware inventory. I am not positive
where to look as far as logs are concerned. I think the clients aren't receiving policy like they should.
Just to give a brief idea, Secondary Site server crashed and we had to rebuild the server and re install secondary site after rebuilding all the
problem. Everything is working fine in Primary site.
Secondary site is communicating with primary site MP and DP
I have checked MPcontrol.log it shows status as OK
I am able to install client through console but yes when I check the configuration manager properties it shows CCM Notification Agent as DISSABLED
and in the Action Tab Machine and User policy are the only cycles showing.
Checked replmgr.log and rclctrl.log but it’s not showing any error
Only log file which shows error is bgdserver.log ( pasting log errors )
ERROR: SQL exception when retrieve client certificate from DB. Exception: The EXECUTE permission was denied on the object 'sp_GetPublicKeyForSMSID', database 'CM_PRI',
schema 'dbo'. -2146232060           SMS_NOTIFICATION_SERVER     05-07-2014 12:09:01               3968 (0x0F80)
ERROR: Can't do post authentication without client certificate stored in regsitration.            SMS_NOTIFICATION_SERVER
05-07-2014 12:09:01                3968 (0x0F80)
ERROR: Failed to authenticate with client [::ffff:10.5.55.88]:49623.        SMS_NOTIFICATION_SERVER     05-07-2014
12:09:01               3968 (0x0F80)
ERROR: SQL exception when retrieve client certificate from DB. Exception: The EXECUTE permission was denied on the object 'sp_GetPublicKeyForSMSID', database 'CM_PRI',
schema 'dbo'. -2146232060           SMS_NOTIFICATION_SERVER     05-07-2014 12:09:01               3968 (0x0F80)
ERROR: Can't do post authentication without client certificate stored in regsitration.            SMS_NOTIFICATION_SERVER
05-07-2014 12:09:01                3968 (0x0F80)
ERROR: Failed to authenticate with client [::ffff:10.5.62.68]:49923.        SMS_NOTIFICATION_SERVER     05-07-2014
12:09:01               3968 (0x0F80)
ERROR: SQL exception when retrieve client certificate from DB. Exception: The EXECUTE permission was denied on the object 'sp_GetPublicKeyForSMSID', database 'CM_PRI',
schema 'dbo'. -2146232060           SMS_NOTIFICATION_SERVER     05-07-2014 12:09:06               3968 (0x0F80)
ERROR: Can't verify signature in message without client certificate for client SCCM GUID:B47059B1-D4E4-41A2-BC88-486A597FE399
SMS_NOTIFICATION_SERVER     05-07-2014 12:09:06               3968 (0x0F80)
ERROR: Invalid hook to be decoded. Authentication                SMS_NOTIFICATION_SERVER
05-07-2014 12:09:06               3968 (0x0F80)
ERROR: Failed to decode message body (<BgbSignInMessage TimeStamp="2014-07-05T06:39:01Z"><ClientType>SCCM</ClientType><ClientVersion>5.00.7804.1000</ClientVersion><ClientID>GUID:B47059B1-D4E4-41A2-BC88-486A597FE399</ClientID></BgbSignInMessage>)
with message header
Help me resolve this issue as I am struggling to resolve this for almost 2 weeks.
Please let me know which logs are helpful and I'll try to add it to replies.

Hi,
Quote:"see that the systems from secondary site show in the console and they all have clients installed but however 60% of the system shows client activity as INACTIVE and not receiving any heartbeat DDR none of the system showing hardware inventory. "
So not all the clients show inactive? Have you checked the logs in an inactive client? Such as ClientIDManagerStartup.log.
Have you checked Secondary Site server's computer name from SQL logins? You could try to remove this account, wait a while, recreate the same computeraccount login with sysadmin access. (http://social.technet.microsoft.com/Forums/en-US/d5383c23-6b71-47cc-9fad-fda82a44a3aa/secondary-site-showing-inactive-clients?forum=configmanagerdeployment)
You could use Configuration Analyzer for System Center 2012 R2 to troubleshoot issues.
http://technet.microsoft.com/en-us/library/dn469435.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to trick SCCM 2012 R2 to use fixed disk

We have bought a sh-tload of Kingston datatraveler workspace 32gb in order to use them as OS installation media.
However because of this: "Windows 8 Certification
requires flash drive manufacturers to configure flash drives as fixed disks. Flash drives configured as fixed disk will show up in Windows Explorer as 'Hard Disk Drives'." - The SCCM task sequence media creator will
only look for removable media, it will
not look for fixed drives. So we can't use the USB-drives..
Any solution?
Kthxbai

Try doing it manually
http://www.techygeekshome.co.uk/2012/09/configmgr-2012-usb-sticks-for-osd.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM 2012 SP1 CU5 - Unknown error code when deploying Bitlocker encryption (happens during check for Bitlocker partition)

Hi
It says in the smsts.log file from the laptop:
Evaluating a WMI condition expression TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Expand a string: root\cimv2 TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Expand a string: SELECT * FROM Win32_DiskPartition WHERE DiskIndex = 0 and Index = 0 and Size = 100 TSManager 03-02-2015 13:34:58 7304 (0x1C88)
The condition for the action (Create BitLocker partition) is evaluated to be true TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Expand a string: smsswd.exe /run: cmd.exe /c bdeHdCfg.exe -target default -size 300 -quiet TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Expand a string: TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Start executing the command line: smsswd.exe /run: cmd.exe /c bdeHdCfg.exe -target default -size 300 -quiet TSManager 03-02-2015 13:34:58 7304 (0x1C88)
!--------------------------------------------------------------------------------------------! TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Expand a string: WinPEandFullOS TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Executing command line: smsswd.exe /run: cmd.exe /c bdeHdCfg.exe -target default -size 300 -quiet TSManager 03-02-2015 13:34:58 7304 (0x1C88)
Creation event received for process 7976 mtrmgr 03-02-2015 13:34:58 4564 (0x11D4)
[ smsswd.exe ] InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
PackageID = '' InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
BaseVar = '', ContinueOnError='' InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
ProgramName = 'cmd.exe /c bdeHdCfg.exe -target default -size 300 -quiet' InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
SwdAction = '0001' InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
Getting linked token InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
failed to get the linked token information. It may not be available. Error 1312 InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
Process ID 7976 is for process C:\Windows\CCM\smsswd.exe mtrmgr 03-02-2015 13:34:58 4564 (0x11D4)
No matching rule found for process 7976 mtrmgr 03-02-2015 13:34:58 948 (0x03B4)
Working dir 'not set' InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
Executing command line: Run command line InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
Creation event received for process 7452 mtrmgr 03-02-2015 13:34:58 4564 (0x11D4)
Process ID 7452 is for process C:\Windows\system32\cmd.exe mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
Found match against RuleID LGR00188 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
Creation event received for process 7940 mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
Tracked usage for process 7452 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
Process ID 7940 is for process C:\Windows\system32\conhost.exe mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
Creation event received for process 3104 mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
Found match against RuleID LGR00183 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
Tracked usage for process 7940 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
Process ID 3104 is for process C:\Windows\system32\BdeHdCfg.exe mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
Creation event received for process 7552 mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
No matching rule found for process 3104 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
Process ID 7552 is for process C:\Windows\System32\vdsldr.exe mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
Creation event received for process 7152 mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
No matching rule found for process 7552 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
Process ID 7152 is for process C:\Windows\System32\vds.exe mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
No matching rule found for process 7152 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
Termination event received for process 3104 mtrmgr 03-02-2015 13:35:00 4564 (0x11D4)
Termination event received for process 7452 mtrmgr 03-02-2015 13:35:00 4564 (0x11D4)
Process completed with exit code 3231711234 InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
Termination event received for process 7940 mtrmgr 03-02-2015 13:35:00 4564 (0x11D4)
BitLocker Drive Preparation Tool version 6.1.7601 InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
opyright (C) 2006-2008 Microsoft Corporation. InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
Command line returned 3231711234 InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
Termination event received for process 7976 mtrmgr 03-02-2015 13:35:01 4564 (0x11D4)
Process completed with exit code 3231711234 TSManager 03-02-2015 13:35:01 7304 (0x1C88)
!--------------------------------------------------------------------------------------------! TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Failed to run the action: Create BitLocker partition.
Unknown error (Error: C0A00002; Source: Unknown) TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Set authenticator in transport TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Set a global environment variable _SMSTSLastActionRetCode=-1063256062 TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Clear local default environment TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Failed to run the action: Create BitLocker partition. Execution has been aborted TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Set authenticator in transport TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Failed to run the last action: Create BitLocker partition. Execution of task sequence failed.
Unknown error (Error: C0A00002; Source: Unknown) TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Set authenticator in transport TSManager 03-02-2015 13:35:01 7304 (0x1C88)
Termination event received for process 6188 mtrmgr 03-02-2015 13:35:03 4564 (0x11D4)
Termination event received for process 7552 mtrmgr 03-02-2015 13:35:06 4564 (0x11D4)
Task Sequence Engine failed! Code: enExecutionFail TSManager 03-02-2015 13:35:07 7304 (0x1C88)
**************************************************************************** TSManager 03-02-2015 13:35:07 7304 (0x1C88)
Task sequence execution failed with error code 80004005 TSManager 03-02-2015 13:35:07 7304 (0x1C88)

Hi Jason
See below. The problem is that on some of our laptops not anywhere geographically close to our IT department, the laptop has been setup with 2 partitions and on some only with 1 partition (we used another deployment system 2 years ago), so I am trying
to prepare all our corporate laptops for Bitlocker encryption. The reason why I made this task sequence was to hit all those laptops that is not being reinstalled / installed again in the near future.
Do you have any suggestions, should it help to remove the cmd.exe /c in front of the Bitlocker cmd line ?
We have tried the MBAM solution, but in my opinion too many problems with the MBAM client.

SCCM 2012 R2 -The current site status: ReplicationMaintenance.

Good day,
Hope all is well.
We currently have a CAS Server, after we upgraded to 2012 R2 replication does not work anymore.
Can anyone assist me please.
I get the following errors, also tried multiple fixes.
Checking if initialization request is needed for replication group Hardware_Inventory_23 from site DTS. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:51:47.029-120><thread=6788 (0x1A84)>
AND
The current site status: ReplicationMaintenance. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:50:32.483-120><thread=8320 (0x2080)>
AND
Error: Failed to create drs init stored proc $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:50:38.381-120><thread=6788 (0x1A84)>
Error: Exception message: [Cannot drop type 'SCCM_DRS_TIME_ZONE_DATA_TYPETEMP' because it is being referenced by object 'spUpsertTIME_ZONE_DATA'. There may be other objects that reference this type.] $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014
07:50:38.381-120><thread=6788 (0x1A84)>
Error: Could not create Drs initialization stored procedures or functions for table TIME_ZONE_DATA, will retry on next cycle. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:50:38.382-120><thread=6788 (0x1A84)>
Hope to hear from you soon,
Thank you

These are the errors:
3/18/2014 4:19:31 PM: ReplicationLinkAnalysis Information: 1 : Current Rule: CheckFailedLinks has 1 dependent rule(s)
3/18/2014 4:19:31 PM: ReplicationLinkAnalysis Information: 1 : Retrieving Rule object(s): CheckFailedLinks from rule object collection.
3/18/2014 4:19:31 PM: ReplicationLinkAnalysis Information: 1 : Current Rule: CheckFailedLinks has only one dependent. Adding Dependency Rule: CheckFailedLinks DependsOn Rule: IsSiteActive
3/18/2014 4:19:31 PM: ReplicationLinkAnalysis Information: 1 : Current Rule: CheckFailedLinks has only one dependent. Adding Dependency Rule: CheckFailedLinks DependsOn Rule: IsSiteActive
3/18/2014 4:19:36 PM: ReplicationLinkAnalysis Information: 1 : Rule DoesBrokerConfigurationExist result: failed.
3/18/2014 4:19:36 PM: ReplicationLinkAnalysis Information: 1 : Rule: DoesBrokerConfigurationExist failed. Stopped running replication link analysis rules.
3/18/2014 4:20:05 PM: ReplicationLinkAnalysis Information: 1 : User selected to re-check failed rule: DoesBrokerConfigurationExist , removing this rule from failed rules list
3/18/2014 4:20:05 PM: ReplicationLinkAnalysis Information: 1 : failedRulesList count= 0
3/18/2014 4:20:09 PM: ReplicationLinkAnalysis Information: 1 : Rule DoesBrokerConfigurationExist result: failed.
3/18/2014 4:20:09 PM: ReplicationLinkAnalysis Information: 1 : Rule: DoesBrokerConfigurationExist failed. Stopped running replication link analysis rules.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Running rule: IsSysCommitTabError.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Running rule: <IsSysCommitTabError SqlInstanceName="sccmcas01" ></IsSysCommitTabError>
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : The last time sys.syscommittab error was checked at 03/18/2014 15:55:00.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : SQL's error log file for SQL instance sccmcas01.stb.sun.ac.za is E:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Scanning SQL error log files for the string [Error: 2601,].
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file \\sccmcas01\E$\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Reading content of file \\sccmcas01\E$\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file \\sccmcas01\E$\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.1.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
\\sccmcas01\E$\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.1.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Done checking the file
\\sccmcas01\E$\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.1 since all other lines in the file are earlier than last check date and time.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Getting results of rule: IsSysCommitTabError execution
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Loading result Xml from rule:IsSysCommitTabError
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : rule:IsSysCommitTabError does not have any dependent rules
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Rule IsSysCommitTabError result: passed.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Rule: IsSysCommitTabError executed SUCCESSFULLY. Adding it to success list.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Running rule: IsSysCommitTabError.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Running rule: <IsSysCommitTabError SqlInstanceName="stbsql02" ></IsSysCommitTabError>
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : The last time sys.syscommittab error was checked at 03/18/2014 15:55:00.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Reading registry key SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL\inst02 on stbsql02
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : SQL's error log file for SQL instance stbsql02\inst02 is I:\MSSQL11.INST02\MSSQL\Log\ERRORLOG.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Scanning SQL error log files for the string [Error: 2601,].
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
\\stbsql02\I$\MSSQL11.INST02\MSSQL\Log\ERRORLOG.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
\\stbsql02\I$\MSSQL11.INST02\MSSQL\Log\ERRORLOG.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Done checking the file
\\stbsql02\I$\MSSQL11.INST02\MSSQL\Log\ERRORLOG since all other lines in the file are earlier than last check date and time.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Getting results of rule: IsSysCommitTabError execution
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Loading result Xml from rule:IsSysCommitTabError
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : rule:IsSysCommitTabError does not have any dependent rules
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Rule IsSysCommitTabError result: passed.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Rule: IsSysCommitTabError executed SUCCESSFULLY. Adding it to success list.
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : dependent rule: IsSiteActive for parent rule: CheckDegradedLinks , failed in previous run(s)
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : So marking current rule: CheckDegradedLinks as failed
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : Dependent Rule: IsSiteActive failed for parent rule: CheckDegradedLinks. Continue running other replication link analysis rules.
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : dependent rule: IsSiteActive for parent rule: CheckDegradedLinks , failed in previous run(s)
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : So marking current rule: CheckDegradedLinks as failed
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : Dependent Rule: IsSiteActive failed for parent rule: CheckDegradedLinks. Continue running other replication link analysis rules.
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : dependent rule: IsSiteActive for parent rule: CheckFailedLinks , failed in previous run(s)
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : So marking current rule: CheckFailedLinks as failed
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : Dependent Rule: IsSiteActive failed for parent rule: CheckFailedLinks. Continue running other replication link analysis rules.
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : dependent rule: IsSiteActive for parent rule: CheckFailedLinks , failed in previous run(s)
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : So marking current rule: CheckFailedLinks as failed
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : Dependent Rule: IsSiteActive failed for parent rule: CheckFailedLinks. Continue running other replication link analysis rules.
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : dependent rule: IsSiteActive for parent rule: IsQueueDisabled , failed in previous run(s)
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : So marking current rule: IsQueueDisabled as failed
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : Dependent Rule: IsSiteActive failed for parent rule: IsQueueDisabled. Continue running other replication link analysis rules.
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : dependent rule: IsSiteActive for parent rule: IsQueueDisabled , failed in previous run(s)
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : So marking current rule: IsQueueDisabled as failed
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : Dependent Rule: IsSiteActive failed for parent rule: IsQueueDisabled. Continue running other replication link analysis rules.
4/10/2014 8:30:55 AM: ReplicationLinkAnalysis Information: 1 : dependent rule: IsSiteActive for parent rule: IsLinkedServerConnectionWorking , failed in previous run(s)
4/10/2014 8:30:55 AM: ReplicationLinkAnalysis Information: 1 : So marking current rule: IsLinkedServerConnectionWorking as failed
4/10/2014 8:30:55 AM: ReplicationLinkAnalysis Information: 1 : Dependent Rule: IsSiteActive failed for parent rule: IsLinkedServerConnectionWorking. Continue running other replication link analysis rules.

Couldn't verify 'C:\Windows\ccmsetup\ccmsetup.cab' authenticode signature. Return code 0x80096001 - SCCM 2012 R2 Client Deployment

Hi All,
I installed SCCM 2012 R2 one primary site from one of our customer & using SQL 2012 SP1 DB at the back-end.
Facing Issues while deploying agent from one of our client machine - OS - window 7 Professional Sp1:
==========[ ccmsetup started in process 3828 ]==========
ccmsetup 25-02-2014 02:20:37 PM
284 (0x011C)
Running on platform X86 ccmsetup
25-02-2014 02:20:37 PM 284 (0x011C)
Updated security on object C:\Windows\ccmsetup\cache\.
ccmsetup 25-02-2014 02:20:37 PM
284 (0x011C)
Launch from folder C:\Windows\ccmsetup\ ccmsetup
25-02-2014 02:20:37 PM 284 (0x011C)
CcmSetup version: 5.0.7958.1000 ccmsetup
25-02-2014 02:20:37 PM 284 (0x011C)
Successfully started the ccmsetup service ccmsetup
25-02-2014 02:20:37 PM 332 (0x014C)
In ServiceMain ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Folder 'Microsoft\Configuration Manager' not found. Task does not exist.
ccmsetup 25-02-2014 02:20:37 PM
332 (0x014C)
CcmSetup is exiting with return code 0 ccmsetup
25-02-2014 02:20:37 PM 332 (0x014C)
Running on 'Microsoft Windows 7 Professional ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/config:C:\Windows\ccmsetup\MobileClientUnicode.tcf" "/RetryWinTask:1"
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/config:C:\Windows\ccmsetup\MobileClientUnicode.tcf" "/RetryWinTask:1"
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
SslState value: 224 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPPORT: 80 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPSPORT: 443 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPSSTATE: 480 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPSCERTNAME: ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
FSP: SCCM.MYDOMAIN.COM ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMCERTISSUERS: CN=MYDOMAIN-CA-CA; DC=MYDOMAIN; DC=COM
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
CCMFIRSTCERT: 1 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Retry time: 10 minute(s)
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
MSI properties: INSTALL="ALL" SMSSITECODE="PRI" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="480" FSP="SCCM.MYDOMAIN.COM" CCMCERTISSUERS="CN=MYDOMAIN-CA-CA; DC=MYDOMAIN; DC=COM"
CCMFIRSTCERT="1" ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Source List: ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
\\SCCM.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
\\SCCMDMZ.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
\\SCCM.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
\\SCCMDMZ.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
MPs: ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
SCCM.MYDOMAIN.COM
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
No version of the client is currently detected.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Folder 'Microsoft\Configuration Manager' not found. Task does not exist.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Attempting #1 retry. Max 5 retries. ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Updated security on object C:\Windows\ccmsetup\.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Sending Fallback Status Point message to 'SCCM.MYDOMAIN.COM', STATEID='100'.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Failed to get client version for sending messages to FSP. Error 0x8004100e
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Params to send FSP message '5.0.7958.1000 Deployment '
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Request failed: 500 Internal Server Error
FSPStateMessage
25-02-2014 02:20:37 PM 1480 (0x05C8)
Running as user "SYSTEM" ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Detected 69650 MB free disk space on system drive.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Checking Write Filter Status. ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
This is not a supported write filter device. We are not in a write filter maintenance mode.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=PRI))'
ccmsetup 25-02-2014 02:20:38 PM
1480 (0x05C8)
OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers>CN=MYDOMAIN-CA-CA;
DC=MYDOMAIN; DC=COM</CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>PRI</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=PRI</CommandLine> </CCM><FSP> <FSPServer>SCCM.MYDOMAIN.COM</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain
Value="MYDOMAIN.COM" /><Forest Value="MYDOMAIN.COM" /></ClientOperationalSettings>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
The MP name retrieved is 'SCCM.MYDOMAIN.COM' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
MP 'SCCM.MYDOMAIN.COM' is compatible ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
Retrieved 1 MP records from AD for site 'PRI'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Retrived site version '5.00.7958.1000' from AD for site 'PRI'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
SiteCode: PRI ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
SiteVersion: 5.00.7958.1000
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Only one MP SCCM.MYDOMAIN.COM is specified. Use it.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Searching for DP locations from MP(s)... ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
Current AD site of machine is Default-First-Site
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Local Machine is joined to an AD domain LocationServices
25-02-2014 02:20:39 PM 1480 (0x05C8)
Current AD forest name is MYDOMAIN.COM, domain name is MYDOMAIN.COM
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
DhcpGetOriginalSubnetMask entry point is supported.
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Begin checking Alternate Network Configuration
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Finished checking Alternate Network Configuration
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Adapter {95A6D3CE-4F28-4E55-A29A-FF3F1A317C61} is DHCP enabled. Checking quarantine status.
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Adapter {6024AB68-EB5E-4370-BD9E-8B2CEFE261A8} is DHCP enabled. Checking quarantine status.
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="PRI"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
<ADSite Name="Default-First-Site"/>
<Forest Name="MYDOMAIN.COM"/>
<Domain Name="MYDOMAIN.COM"/>
<IPAddresses>
<IPAddress SubnetAddress="10.0.0.0" Address="10.10.10.192"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
Sending message header '<Msg SchemaVersion="1.1"><ID>{F6331322-941A-4E44-974F-A755B1B016A4}</ID><SourceHost>POOJASETHI</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:POOJASETHI:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>SCCM.MYDOMAIN.COM</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-02-25T08:50:39Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1126"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
CCM_POST 'HTTP://SCCM.MYDOMAIN.COM/ccm_system/request'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Received header '<Msg SchemaVersion="1.1">
<ID>{14ADB6F1-95C1-4EEF-B8BA-16CD020ACFCF}</ID>
<SourceID>GUID:526CE573-6351-407E-AC2A-2C3927979AD9</SourceID>
<SourceHost>SCCM</SourceHost>
<TargetAddress>direct:POOJASETHI:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<Capabilities><Property Name="SSL" Version="1"/></Capabilities><ReplyCapabilities><AllowRegistrationReset>direct:SCCM:ClientRegistration</AllowRegistrationReset></ReplyCapabilities><TargetHost>POOJASETHI</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>https</Protocol><SentTime>2014-02-25T08:50:39Z</SentTime><Body
Type="ByteRange" Offset="0" Length="3494"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
Name="AuthSenderMachine">SCCM;SCCM.MYDOMAIN.COM;</Property><Property Name="MPSiteCode">PRI</Property></Hook></Hooks><Payload Type="inline"/></Msg>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="PRI" MasterSiteCode="PRI"
SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003" Signature="http://SCCM.MYDOMAIN.COM/SMS_DP_SMSSIG$/PRI00003"/><ADSite
Name="Default-First-Site"/><IPSubnets><IPSubnet Address="10.0.0.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>SCCM.MYDOMAIN.COM</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord><LocationRecord><URL
Name="http://SCCMDMZ.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003" Signature="http://SCCMDMZ.MYDOMAIN.COM/SMS_DP_SMSSIG$/PRI00003"/><ADSite Name="Default-First-Site"/><IPSubnets><IPSubnet Address="172.16.10.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>SCCMDMZ.MYDOMAIN.COM</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="1"/><Locality>FALLBACK</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="PRI00003" FullPackageVersion="1" FullPackageHash="BFC11E099E8F451107B43E0DBEFD93B01DB2D6453DA74F8A2CB94B73D676C1CD"
MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30354761;897103744" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Found local location 'http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Found remote location 'http://SCCMDMZ.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Discovered 1 local DP locations. ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
PROPFIND 'http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Using DP location http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
GET 'http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003/ccmsetup.cab'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Couldn't verify 'C:\Windows\ccmsetup\ccmsetup.cab' authenticode signature. Return code 0x80096001
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Sending Fallback Status Point message to 'SCCM.MYDOMAIN.COM', STATEID='316'.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Failed to get client version for sending messages to FSP. Error 0x8004100e
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Params to send FSP message '5.0.7958.1000 Deployment Error 0x80004005. Pre-req file name: C:\Windows\ccmsetup\ccmsetup.cab'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Request failed: 500 Internal Server Error
FSPStateMessage
25-02-2014 02:20:39 PM
1480 (0x05C8)
Failed to extract manifest cab file with error 0x80004005. Try next location.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
GET 'HTTP://SCCM.MYDOMAIN.COM/CCM_Client/ccmsetup.cab'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Couldn't verify 'C:\Windows\ccmsetup\ccmsetup.cab' authenticode signature. Return code 0x80096001
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
CcmSetup failed with error code 0x80004005
ccmsetup 25-02-2014 02:20:39 PM
284 (0x011C)
Please let me know any solution or workaround for this
Thanks Rahul$

Hi,
The client cannot verify the signature of ccmsetup.cab. I suggest you check the Trusted Root Certification Authorities in certificate store on the client to see whether a certificate is missing.
Try to enable verbose logging for SCCM client installation. Then check the log to see whether there are some useful information.(http://technet.microsoft.com/en-us/library/gg699356.aspx)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

CCMSETUP not updating on SCCM 2012 SP1 CU3/CU4 primary site

I have a SCCM 2012 SP1 CU3 primary site and i can't upgrade the local installed SCCM Client.
The error I get in ccmsetup.log is:
<![LOG[MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002]LOG]!><time="15:44:22.408-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:300">
<![LOG[MSI: Action 15:44:22: Rollback. Rolling back action:]LOG]!><time="15:44:22.562-60" date="02-08-2014" component="ccmsetup" context="" type="0" thread="2496" file="msiutil.cpp:314">
<![LOG[File C:\windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action: CcmRegisterHostingConfiguration.
ErrorMessages:
Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002
]LOG]!><time="15:45:00.798-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:872">
<![LOG[Client installation has failed too many times. Ccmsetup will now abort.]LOG]!><time="15:45:00.830-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7941">
<![LOG[Successfully deleted the ccmsetup service]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2496" file="ccmsetup.cpp:3320">
<![LOG[InstallFromManifest failed 0x80070643]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7086">
<![LOG[CcmSetup failed with error code 0x80070643]LOG]!><time="15:45:05.832-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2324" file="ccmsetup.cpp:10544">
I have this on my primary and secondary servers as well.
Is upgrading to R2 recommended and will that solve this issue ?
When googling to this issue i found that there is a solution for this: remove MP, upgrade Client, install MP.
But this is my primary and secondary and on secondary i am not allowed to remove the MP. It is hardcoded enabled.

Try the following steps to specify the hotfix when installing the client.
1. Open an elevated command prompt.
2. Run a command line similar to the following – if CU3 has already been installed, the MSP file below should be on the site server, in the
\\servername\SMS_SITE\Client\hotfix folder:
\ccmsetup.exe PATCH=\Configmgr2012ac-sp1-kb2882125-x64.msp
Juke Chou
TechNet Community Support

Is the distribution point role required on an SCCM 2012 site server?

I am wondering if the distribution point role is required on an SCCM 2012 site server.
We have an installation of SCCM 2012 SP1 with a site server, and two remote DPs.
I would like to remove the DP role from the site server, and stand up another server (2012) at the same location, making it a DP and also have it hold the WSUS content.
I was successful in creating the DP on the new server. I distributed all of our packages to the new server.
I then removed the packages from the DP on the site server, and removed the DP role from the site server.
After making these changes, we lost the ability to deploy packages, either from the new DP server, or from the previously existing DPs that were at other locations.
Deployment status in the SCCM console showed that clients were “waiting for content”.
I found that adding the DP role back to the site server, and distributing packages to it corrected the problem.
Deployment resumed after doing that. Is it necessary to have packages on a DP on the site server?
We want to virtualize the server, and would like to make it as small as possible to facility restores.

Hi,
Have you checked the log file distmgr.log? Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 R2 - Site is not active

Good day,
Hope all is well.
We currently have a CAS Server, after we upgraded to 2012 R2 replication does not work anymore.
Can anyone assist me please.
I get the following errors, also tried multiple fixes.
Checking if initialization request is needed for replication group Hardware_Inventory_23 from site DTS. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:51:47.029-120><thread=6788 (0x1A84)>
AND
The current site status: ReplicationMaintenance. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:50:32.483-120><thread=8320 (0x2080)>
AND
Error: Failed to create drs init stored proc $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:50:38.381-120><thread=6788 (0x1A84)>
Error: Exception message: [Cannot drop type 'SCCM_DRS_TIME_ZONE_DATA_TYPETEMP' because it is being referenced by object 'spUpsertTIME_ZONE_DATA'. There may be other objects that reference this type.] $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014
07:50:38.381-120><thread=6788 (0x1A84)>
Error: Could not create Drs initialization stored procedures or functions for table TIME_ZONE_DATA, will retry on next cycle. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:50:38.382-120><thread=6788 (0x1A84)>
Hope to hear from you soon,
Thank you

Duplicate. See
http://social.technet.microsoft.com/Forums/en-US/fbf77346-885d-4683-97ac-0b433581ae25/sccm-2012-r2-the-current-site-status-replicationmaintenance?forum=configmanagergeneral#fbf77346-885d-4683-97ac-0b433581ae25
Locking thread.
Torsten Meringer | http://www.mssccmfaq.de

[SCCM 2012 R2] Re-using site code

Similar Messages

Maybe you are looking for