SCCM 2012 R2 - remote control port[s] - customize/configure/change?

First, let me start by saying I am aware of
this page that outlines the ports used in SCCM. It has a section called "configurable ports" and another called "non-configurable ports". However, remote control (port 2701) isn't listed under either - its under another section.
Currently, we have another app utilizing the same port[s] that the SCCM remote control piece uses. I want to know if there is any way to configure this to use a different port? Somewhere in the registry perhaps? From what I've read it doesn't sound like
it is changeable but I wanted to confirm in here.
Our other app is configurable, however, it would require us to not only change it on each of the 100 or so Windows servers, but over 900 Unix servers as well that are configured to use the same port. So it will be a little bit of work. The other
option (as I have it set up now) is to just leave remote control disabled.
Thanks in advance!

Is 2701 the default port for this application or is this just bad luck? If it is the default port would you mind sharing which app this is for our information.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Similar Messages

SCCm 2012 r2 Remote Control setting

hi,
i have SCCM 2012 r2
my question is if there are 2 client policy deployed to 1 pc "member of 2 collection" first policy allow remote full control to IT support and 2nd policy allow remote view control to Domain User.
which one take effect?
i already made the policy and applied it and give specific normal domain user remote control security role to specific collection
but when user try to connect to any PC the remote tool ask him to supply credential.

at first place Thanks for your support and
Patience.
sorry, i did not understand what was in the link you specified.
i know it's device setting not user setting what i need is:
if i have user1 and user2
i want user1 to have full remote control permission and for user2 i want him to have view only remote control. on same pc which is member at 2 collection "is it possible to do it and how?"

SCCM 2012 SP1 Remote Control Smart Card Support?

Hi,
We're currently running SCCM 2012 SP1. We have implemented mandatory smart card login on our Win 7 workstations using GPO. Is it correct to say that SCCM's Remote Control Viewer does not support passing of smart card credentials through the session?
Our testing thus far would indicate that it does not. This is problematic for our help desk that often uses the Remote Viewer to connect to end user machines and then elevate rights to perform admin level tasks. So far the only way we have developed
to work around it is to run a script that temporarily changes the GPO to remove the smart card enforcement requirement. Is there a better way to address this issue?
Thanks
Josh

Just to add to Wally's comments, there's actually no way this will ever happen without significant investments and development time (if it's possible at all) and it's really not anything that the ConfigMgr product group could implement as it has to with
authentication which is handled by the OS. Passing smart card credentials across the network is inherently flawed and poses a huge security risk. When this was discussed internally at Microsoft, the security teams there said they could easily hack any mechanism
that tried to do this and compromise the credentials.
The recommendation from Microsoft is to use local admin accounts on workstations for elevation. This goes for *any* type of remote control (including remote desktop btw) because the same security weakness exists regardless of the remote tool being used.
Jason | http://blog.configmgrftw.com

Problems install SCCM 2012 with remote sql 2008 r2 sp2

I am having issues installing sccm 2012 on a remote sql 2008 r2 sp2 server on a seperate instance.
I get the error "The network path was not found"
if i point it at the primary instance it will let me continue but i cannot install sccm into that instance.
I have turned off dynamic ports and set a static port but I do not see where i can enter that in the installer.
I cannot seem to verify is the ssb port is working correctly or not.
my account is local admin on both servers and a sql sysadm.
There is no firewall between servers.
Any suggestions?
Regards
Don

SPN is setup to AUTO register and is working. remote sql is not a cluster. Windows firewall on both servers is disabled. Sql browser is enabled and started. we have a group for system center that contains site servers and this group
is in the local admin of both servers and sysadm inside of sql server.
Why we are consolidating all or our lesser sql servers into a larger one.
Snipt of the log.
12/12/2012 2:57:37 PM: ConfigMgrSetupWizard Error: 1 : Exception message: [The network path was not found.
], Exception details: [System.IO.IOException: The network path was not found.
Server stack trace:
at Microsoft.Win32.RegistryKey.Win32ErrorStatic(Int32 errorCode, String str)
at Microsoft.Win32.RegistryKey.OpenRemoteBaseKey(RegistryHive hKey, String machineName)
at Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.GetSqlConnection(String databaseName, String serverName, Boolean encrypt)
at Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.CheckSqlConnection(String serverName, String instanceName)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
at Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
at Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
at Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
at System.Windows.Controls.Button.OnClick()
at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
at System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
12/12/2012 3:01:42 PM: ConfigMgrSetupWizard Information: 1 : Creating SQL connection to database ADMIN\master on server YSQL030.srf.local.
12/12/2012 3:01:42 PM: ConfigMgrSetupWizard Error: 1 : Exception message: [The network path was not found.
], Exception details: [System.IO.IOException: The network path was not found.

SCCM 2012 R2 Remote DP (w PXE): cannot find SCCM installation path nor logs

Hello All,
I'm deploying a new SCCM 2012 R2 environment.
I've got 1 primary site with a remote DP with PXE enabled.
The PXE point is working: clients can pxe boot.
However, I can't find the SMSPXE log on the server..
I can't find any SCCM related log for that matter on the server..
Can anyone tell me what I'm missing? How can it be that I can't find the logs?
The C:\Program Files doesn't contain a Configuration Manager folder neither.
Thanks!
Filip

Hi,
Kent has a blog post on it here:
http://blog.coretech.dk/kea/smspxe-log-in-sccm-2012/
" the log is placed on the distribution point in <X>\SMS_DP$\SMS\Logs where X is the location of the contentlibrary"
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012: Reinstall remote distribution point?

Hi,
We have a remote distribution point to which we can't deploy packages anymore. Several attempts to repair it failed.
I'd like to remove the distribution point and reinstall it via SCCM 2012 console.
However, I'd like to know the impact since it contains GB of packages already.
Note: the DP has been removed for clients (temorarely) so no impatc there.
My questions:
-what is best practises: can I just remove and add it in 1 go (or need to wait before re-adding, reboot needed in between)?
-will all data be pulled in again (I activated pull and would reactivate it after reinstall)?
-what's your experience in this procedure? does it work in general or is it preferrable I continue troubleshooting the current situation?
Please advise.
J.
Jan Hoedt

I can see there was installed a new dotnet version C:\Windows\Microsoft.NET\Framework64\v4.0.30319
recently.
Can/should I register this to IIS?
http://stackoverflow.com/questions/22952115/asp-net-iis-7-5-http-500-21-error
C:\Windows\Microsoft.NET\Framework\v4.0.30319>aspnet_regiis.exe -i
Jan Hoedt

SCCM 2012 - Slow Remote Tools

Hi guys,
We are using SCCM12 in a Gigabit LAN environment, and Remote Tools is very slow and "lagged", the mouse cursor dragged slowly over
the remote workstation.
As seen here and here on
TechNet, no one has a solution to that problem.
By far reading SP1 beta release notes I couldn't find anything related to this issue.
My thoughts:
As one of the old threads mentioned SCCM
2007 was "based on the Vista RDP collab protocol" (6.0?) so maybe installing the new RDP8.0 protocol might help?
Maybe because SCCM12 authentication based on Kerberos instead of NTLM might cause this decrease of performance? and if so, there is
anyway to change it? is it worth?
any help would be much appreciated!
Thanks,
Gal

Hi Eric, and thanks for your reply.
I have read those posts you replied but I couldn't find any of the optimizations to have any better performance.
it's frustrating that it seems no one else having this issue and MS doesn't really do much about it (in SP1 rls notes there is nothing about it).
in our company we use ONLY RCViewer for remote control.. having a third-party solution is not an option.
as for your questions,
- Remote Assistance works PERFECT, no lags at all, but we want to use SCCM RC. (also RDP is great)
- We are using Win7 Ent x32/x64 both, we have tried to remote from several systems (whole of the helpdesk team is complaining about that, again, comparing to SCCM2007 which they were used to..)
I still hope that someone else who upgraded to SCCM12 had any solution to that...
/Gal

Remote Control Port Numbers

Hi All,
I am configuring Windows Firewall to allow Remote Management. Does any
know what ports I need to open on my local clients ?
Thanks
Michael

Thanks Shaun,
I was thinking that was the port.
I have added this line to the Windows firewall exception,
1761:TCP:*:enabled:RemoteMan
This works, but only with workstations that have the ZFD6.5 SP1b client.
Do all clients need to be upgraded to this version of the ZFD client in
order for Windows firewall exceptions to be configured ?
Thanks
Michael
> TCP 1761 for the workstation, TCP 1762 on the machine running
> ConsoleOne (for the remote control listener). 21 for file transfer
>
> --
>
> Shaun Pond
>
>

SCCM 2012 R2 CU2 - Unable to deploy or configure PullDP's

After upgrading to SCCM 2012 R2 CU2, I'm not able anymore to promote new Distribution Points acting as Pull DP's with the source servers set. This was configured and worked as expected under SCCM 2012 R2 CU1 where the 2 DP's were setup as PullDP's. After
Upgrade to 2012 R2 CU2, I decided to switch everything over to use HTTPS instead of HTTP as it is getting closer to production. In this process I uninstalled a DP and tried to promote it back, yet when I try to select a DP as source, it lists none.
Venturing a bit ahead, if I try to modify the PullDP's on the one that upgraded to SSL as expected, this also appears to be "broken" if I strip away the single DP it has and add in a new, so this change has not been applied to it.
After sleeping on it, I decied to try to do this via PowerShell instead, to no avail.
Output of powershell:
PS BKA:\> Set-CMDistributionPoint -SiteCode 'ABC' -SiteSystemServerName 'RemotePullDPFQDN' -EnablePullDP $true -SourceDistributionPoints 'PrimarySiteServerFQDN' -SourceDPRanks 1WARNING: One or more source distribution points are invalid.Set-CMDistributionPoint : Validation of input parameters failed. Cannot continue.At line:1 char:1+ Set-CMDistributionPoint -SiteCode 'ABC' -SiteSystemServerName 'RemotePullDPFQDN ...+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (Microsoft.Confi...ionPointCommand:SetDistributionPointCommand) [Set-CMDistributionPoint], InvalidOperationException + FullyQualifiedErrorId : ValidationError,Microsoft.ConfigurationManagement.Cmdlets.HS.Commands.SetDistributionPointCommand
The DP's are also MP and FSP's for the purpose in a "remote" untrusted forest, this is for them to have localized content available to lessen the load on the firewalls AND the Primary Site Server itself (6000+ laptops and desktops).
Any thoughtson how to promote the PullDP back?

http://social.technet.microsoft.com/Forums/en-US/72847bfc-c529-449c-a6b3-d7ce6bfcc8bb/how-to-set-an-https-distribution-point-as-a-source-dp-for-pull-dps?forum=configmanagergeneral
Torsten Meringer | http://www.mssccmfaq.de

Server 2012 R2 Remote Desktop Connection Broker, Server Name Change.

We have a server that was the connection broker, We changed its name and now the connection broker wont recognize the new name. It continutes to want the old server. Unfortunately we cant change it back. Is there a fix for this?
We tried the powershell command but it doesnt see the old server name and errors out.

Hi,
Changing the name of a RD Connection Broker server is not supported. If you are able to remove RD Connection Broker Role Service and install a new RDS deployment you may be able to get it working again (with perhaps a few registry fixes),
but you will lose all of the configuration data associated with your deployment. If you have a very basic RDS deployment it may not be a big deal to recreate the collections, configure settings, publish
RemoteApps, etc., as they were before.
Another potential option if you were able to temporarily change the name back would be to switch to HA mode with the database stored on the local server (in SQL Express), add another RDCB server, remove RDCB from the original (leaving the SQL Express database
still functional), rename the server, add it back as a RDCB server, then remove RDCB from the second server. I have not tried this procedure but at first glance I believe it should work, although it may be a bit complicated if you are not well versed
with 2012 R2 RDS.
If this is a small environment you may want to consider backing up any data on the servers and then reinstalling all of the RDS servers from scratch.
It is possible to manually fix the issue you are seeing by editing the RDMS database, editing the registries of all the RDS servers, and other related tasks, however, I would not suggest it due to the complexity.
-TP

Remote control and remote desktop client in sccm 2012 ?

What is the difference between remote control and remote desktop client in sccm 2012 ?

Remote Control is a built-in feature for SCCM 2012 and uses the RPC protocol. When you use this, the user can still be logged on while helping.
Remote Desktop is a buit-in feature for Windows and uses the RDP protcol. When you use it, the user will be logged off.
Why you would use one over the other depends on your requirements.
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

SCCM 2012 Reporting point server instance blank

I have installed SCCM 2012 With remote SQL database server successfully, at the time of Reporting service point role installation, its verified the SCCm database successfully but SQL server service instance is blank, what would be the reason....
Below my SCCM architecture:
1. Created one Database in Remote server SQL server is in failover cluster active passive mode
2. Configured Reporting services in active mode.
3. at the time of reporting point role installed failover cluster database name given and its successfully verified with SCCM_123 database.
4. on the instance name showing blank.
Please help me if anyone facing this type of problem.
Thanks in advance.
Rishi!!
Regards, Rishi

It is not totally intuitive when installing the Reporting Point role with a cluster. When installing a Failover Cluster, SSRS can only get put on one node or on its own box, as it uses NLB for scale-out not FoC. SSRS is also not configured by
default if you use it with a clustered SQL instance, so you have to open SSRS Configuration Tool and make sure the ReportServerDB is created, and that the URLs can be browsed. Once that is done, then try adding it in CfgMgr:
In CfgMgr, In the Administration workspace, expand Site Configuration, and then click
Servers and Site System Roles.
Select the node that has SSRS installed on it (not the Failover Cluster virtual computer account). If SSRS is on its own box, first you have to go to
New site system and add the SSRS box.
Then, on the Home tab, in the Server group, click
Add Site System Role. The Add Site System Roles Wizard opens. Choose Reporting Point, and after verifying the connection to the CfgMgr DB, the instance name should populate.
http://technet.microsoft.com/en-us/library/gg712698#BKMK_InstallReportingServicesPoint
http://social.technet.microsoft.com/Forums/en-HK/configmanagerdeployment/thread/390a6ea8-8a24-47d0-b6ad-2e1063bbc72d

OSD SCCM 2012 R2: Dart on bitlockered machine

Hi,
Please advise on implementing dart on SCCM 2012 R2 task sequence on bitlcokered machines.
Have to start from scratch (working task sequence with bitlocker though).
J.
Jan Hoedt

Hi,
Using Dart as boot image is just like the other boot images. See the steps below to add a Dart into SCCM. Please notice my first post, you need to disable Bitlocker before booting into any PE to do an OSD.
http://www.ideadata.co.uk/index.php/pxe-booting-dart-8-1-with-sccm-2012-including-remote-viewer/
Juke Chou
TechNet Community Support

Sccm 2012 reporting services server instance blank

Hi guys,
Can anyone provide me tips to install reporting service point on SCCM 2012 server.
P.S: SRS instance configured in SQL server 2008 R2 SP2 and it can accessible (http://<SQLserver>/Reports/) in SCCM 2012 server
Please help me!
Thanks,

If you don't have DNS entry for your Report Service Point (SQL server), the instance field can be blank too.
Can you expand on this as I have never heard of this issue before.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Remote control center

Hello,
I've created remote control center on a sunOS application server for use in running sqlldr mappings. The service comes up properly when I run ./local_service_login.sh -startup $ORACLE_HOME
How do I define this remote control center as a control center in my design center?
Thanks
Steve

Hi Steve
You can add new control centers in the Connection Explorer in the design center you should go to the Control Centers node and create an instance here. This will be the credentials for your remote control center. Your configuration being used should point to this control center. In the Project Explorer, expand configurations node, edit the configuration (the current config is shown in the bar at the bottom of the design center) and point the configuration to the remote control center (Details panel Select Control Center).
Cheers
David

SCCM 2012 R2 - remote control port[s] - customize/configure/change?

Similar Messages

Maybe you are looking for