SCCM 2012 R2 Report Viewer not working.

I have recently upgraded to SCCM 2012 R2 and now when I go to the reports I get this message. Has anyone come across this?
The
DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an
error: The encryption type requested is not supported by the KDC.
(rsRuntimeErrorInExpression)

I found the solution.
http://www.netdavidic.com/2013/11/how-to-fix-sccm-2012-r2-reporting.html#!/2013/11/how-to-fix-sccm-2012-r2-reporting.html

Similar Messages

SCCM 2012 Software Metering is not working

SCCM 2012 Software Metering is not working in our environment. Other than software metering, reports work just fine.
I have created a few simple software metering rules with “Acrobat.exe” and “Outlook.exe”. Rules are enabled. Rules were on at least 6 months.
When I go to software metering reports, Month parameter value is empty and I can’t choose any value.
I ran runmetersumm.exe on our server, it did not work as intended. :
Summarizing data up to 0 hours old.
File Usage Summary added -1 rows in 0 seconds.
Monthly Usage Summary added -1 rows in 0 seconds.
I am stumped. Why would it add minus rows?
Any ideas how I can make software metering work on our environment?
Thank you

Finally figured it out.
mtrmgr.log did not find any rules when I ran executables. So I knew it wasn't working on the server side.
After searching for a while, I found the solution from the link below:
http://social.technet.microsoft.com/Forums/en-US/8f048512-c357-437e-89ec-cee5356a10b1/software-metering-reports-empty?forum=configmanagergeneral
1. Deleted RULECHG.RTA under policypv.box folder
2. Removed and recreated metering rules again.
Everything is working again now.
Thank you.
I do wonder how to avoid those problems going forward though.

Active Report Viewer not working in Internet Explorer 10

We have many legacy applications developed using ASP and VB(InterDev). Our organisation is moving to use Internet Explorer 10 in the near future.
We had a IE10 compatibility testing for our legacy applications and we observed that the applications using Active Report Viewer to generate the reports are not working. Applications works perfectly fine with the older version of Internet Explorer.
We looked for the various workarounds but we did not succeed.
Some application does nothing when we click on a button to generate the report but some applications throws the below error:
"ActiveX
control failed to load! -- This control is required to use the Address Book and Attachment features. Please check your browser security settings and/or contact PC Support to install the digitally signed control."
We will be glad if we get any assistance on this issue.

We have many legacy applications developed using ASP and VB(InterDev). Our organisation is moving to use Internet Explorer 10 in the near future.
We had a IE10 compatibility testing for our legacy applications and we observed that the applications using Active Report Viewer to generate the reports are not working. Applications works perfectly fine with the older version of Internet Explorer.
We looked for the various workarounds but we did not succeed.
Some application does nothing when we click on a button to generate the report but some applications throws the below error:
"ActiveX control failed to load! -- This control is required to use the
Address Book and Attachment features. Please check your browser security settings and/or contact PC Support to install the digitally signed control."
We will be glad if we get any assistance on this issue.
Hi,
There is a more dedicated forum for web development issues
https://forums.asp.net , I would recommend you post this issue in that forum to get more dedicated supports.
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SCCM 2012: F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image": F8 works in winPE

F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image"
F8 option turned on in the boot image.
F8 debug window works in Windows PE.
F8 debug window does not show-up on F8 key-press after entering the 'Currently installed Windows 7 Image" all the way to the end of the task sequence.
But after a 'Restart Step' (and if F8 was pressed) the Task Sequence tends to pause indefinitely as if the
F8 debug screen is open in the background.
I am using SCCM 2012 SP1 (CU 1 is
not an option at the moment).
Any ideas as to how I could get the debug F8 option back?

There have been a couple reported occurrences of this (or something similar) to my knowledge with no resolution in the forums. Your best bet may be to open a case with CSS.
Also note that if you were going to do a CU, why would you pick CU1 instead of CU4? And, can I ask why it's not an option out of curiosity?
Jason | http://blog.configmgrftw.com

ACS 5.1 "Launch Monitoring & Report Viewer" not working

I'm trying to view the logs on the ACS server via the web interface. When I click on "Launch Monitoring & Report Viewer", it opens a new window and I get the error "cannot display the webpage". This happens on both Firefox and IE. The URL it's trying to load is this: https://x.x.x.x/acsadmin/ReportsRedirectorAction.do
These are relatively new boxes so I don't know if I missed some config bit somewhere to enable that utility or what.
Any insight would be appreciated.
Thanks,

I had the issue in ACS 5.1 no patch and it was fixed after reboot and after applying patch three it didnt showed up. The only difference is i had a standalone ACS.Who is the log collector in your setup?
Let me know if you can apply patch here is the link for that :
http://www.cisco.com/cisco/software/release.html?mdfid=282773289&flowid=4409&softwareid=282766937&release=5.1.0.44&rellifecycle=&relind=AVAILABLE&reltype=latest
here is the procedure to apply patch 3 ( on both primary and secondary)
downlaod the file : 5-1-0-44-3.tar.gpg
and place the file in the FTP server in your enviroment
Login to the ACS CLI :
Create a repository:
acs/admin(config)# repository myrepository
acs/admin(config-Repository)# url sftp://starwars.test.com/repository/system1
acs/admin(config-Repository)# user luke password skywalker
acs/admin(config-Repository)# exit
then run this command :
acs patch install patch-name.tar.gpg repository repository-name
#Installing an ACS patch requires a restart of ACS services.
Would you like to continue? yes/no
Thanks
Waris Hussain.

SCCM 2012 R2- Client push not working

Hi,
We have a SCCM 2012 R2 environment in our production. In one of the client machine i am unable to deploy client using Client push method. Below is the error in ccm.log
I am able to access admin$ share from sccm server. Please help!!
Regards
Pallavi

It means that it's trying to connect to the Admin$ share, but that it's failing because it's either unavailable or the account has no access.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava Chunduri

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

SCCM 2012 R2 - Site is not active

Good day,
Hope all is well.
We currently have a CAS Server, after we upgraded to 2012 R2 replication does not work anymore.
Can anyone assist me please.
I get the following errors, also tried multiple fixes.
Checking if initialization request is needed for replication group Hardware_Inventory_23 from site DTS. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:51:47.029-120><thread=6788 (0x1A84)>
AND
The current site status: ReplicationMaintenance. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:50:32.483-120><thread=8320 (0x2080)>
AND
Error: Failed to create drs init stored proc $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:50:38.381-120><thread=6788 (0x1A84)>
Error: Exception message: [Cannot drop type 'SCCM_DRS_TIME_ZONE_DATA_TYPETEMP' because it is being referenced by object 'spUpsertTIME_ZONE_DATA'. There may be other objects that reference this type.] $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014
07:50:38.381-120><thread=6788 (0x1A84)>
Error: Could not create Drs initialization stored procedures or functions for table TIME_ZONE_DATA, will retry on next cycle. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:50:38.382-120><thread=6788 (0x1A84)>
Hope to hear from you soon,
Thank you

Duplicate. See
http://social.technet.microsoft.com/Forums/en-US/fbf77346-885d-4683-97ac-0b433581ae25/sccm-2012-r2-the-current-site-status-replicationmaintenance?forum=configmanagergeneral#fbf77346-885d-4683-97ac-0b433581ae25
Locking thread.
Torsten Meringer | http://www.mssccmfaq.de

CR11 Report Viewer not compatible with MFC10.0

I upgraded to the Visual Studio 2010 (from 2008) last week. After the upgrade I recompiled all my applications and everything worked as expected except for the CR11 Report Viewer.
The latest MFC version (10.0) causes an "Unhandled Exception at xxxxx in yyyyy.exe 0xC00000005....Access Violation". This occurs in the MFC code where "DoVerb" is being called on the CR OLE object.
Because VS2010 allows applications to be recompiled to use a prior version of MFC I recompiled using the 9.0 version (the version from VS20008) and my "Print Preview" dialogs (which use the CR11 Report Viewer Component) work correctly.
It seems the Report Viewer is NOT compatible with MFC 10.0 (note: MFC10.0 doesn't interfere with the RDC because I can print reports from the applications; it's only the viewer that causes the application exception).
Does anyone know how to 'fix' this problem with MFC10.0/CR11Viewer?
Thanks,
Randy

Hi Randy,
Because you are using the RDC in a C++ app there may be a work around, although it's still not officially supported. Download CR XI R2 and patch yourself up to Service Pack 6. SP 4 is a full build and then apply SP 5 and then SP 6.
Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Also, we have not supported MFC classes for a long time now so if you can avoid using them that may help too, or at least within the RDC API's.
I'll check with our PM's to see if there is anything we can do as far as escalating this issue but I doubt it.
Your only option may be to use the 9 version as you noted it still works.
Thank you
Don

Crystal reports 2008 not working on 64 bit OS

Hello Everybody,
I have developed crystal reports in CR2008. My development environment is 32 bit OS with visual studio 2005 and it is working fine. When I deployed this applciation into 64 bit OS,application is working fine,but reports are not working/displaying.
Thanks
Ram

I moved your post to the .NET - SAP Crystal Reports forum. You'd never have gotten an answer on the CR Design forum
More info needed:
Exact version of CR (Help | About)?
Web or win app?
More details on:
reports are not working/displaying
Errors? Do you get the viewer? Or just an empty form?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

SCCM 2012 Remote Control Viewer - Multiple Session

Hello Guys,
We have faced one issue that there have only one session can be connected if we are using the SCCM 2012 remote control viewer. The problem is that we have two support team may require to remote the same desktop in the same time via the remote control viewer.
Do anyone know how we can activate more session for remote control viewer in SCCM 2012?
Thanks,
SCCM users

FYI – If you need to have 2 technicians remoted into the same device, we found a workaround, this works with SCCM 2012 SP1 CU3, and Windows 7 clients.
For tech1, using the ConfigMgr console, right-click the device, Start -> Remote Control
For tech2, using the ConfigMgr console, right-click the device, Start -> Remote Assistance

1. TACAS+ Accounting and Logged in Users report is not working on ACS 4.1(1

Hi,
I am facing problem with ACS 4.1 accounting, TACAS+ Accounting and Logged in Users report are not working, the csv file is been generated but nothing is showened in the file.
I have checked the documents related to ACS 4.1, it says that there is a bug related to command accounting âCSCsg97429 - TACACS+ Command Accounting does not work in ACS 4.1(1) Build 23â.
Tried upgrading the same with the patch applAcs-4.1.1.23.3.zip, still it is not working.
Other reports are working fine.
1. TACAS+ Accounting - not working
2. Logged in Users - not working
3. TACAS+ Administration - working
4. Passed Authentication - working
5. Failed Attempts - working
Any suggestions or any idea, please revert.
Regards
Vineet

Hi,
Thanks
Yes I have configured the command âaaa accounting exec default start-stop group tacacs+â
As I have mentioned all the other reports are working. Which user and when he has logged in and what commands he has used. Only the TACAS+ Accounting and logned user is not working.
Regards,
Vineet

Extraction and Reporting is not working in BI SYSTEM

Hi,
The BI developement r shows error an License Expire.Currently i change the system date and working fine. If changing the system date modeling part is working fine. But extraction and Reporting is not working. please help me to solve this problem.

HI,
If the license is expired then appky for the permanent license from Service market place and install it in the system through SLICENSE TCode. For this you need to have S-user ID to access service market place to apply for license.
Regards,
Sharath

Web reporting does not work in BW system

Hi-
I'm a BW consultant with very little BASIS knowledge and have been asked to look into why web reporting is not working on our system.
We get the following message when trying to run BW queries on the web:
Not found
The following error occured:
%3cpre%3e%0aLOCATION+++MessageServeronhosttongue%0aERROR+++++Grouptonguenotfound%0a%0aTIME+++++++TueMar2004%3a21%3a132007%0aRELEASE+++640%0aCOMPONENT+LG%0aVERSION+++5%0aRC++++++++-6%0aMODULE++++lgxx_mt%2ec%0aLINE++++++3518%0aDETAIL++++LgIGroup%0aCOUNTER++++10%0a%3c%2fpre%3e
I've checked SICF and all services are activated. I suspect that the problem is in the RZ10 parameters, but do not know what needs to be set there. Here are our settings:
rdisp/max_wprun_time                        3600
abap/cache_area                             10000000
abap/buffersize                             1500000
login/system_client                         100
INSTANCE_NAME                               DVEBMGS00
SAPSYSTEM                                   00
rdisp/wp_no_dia                             10
rdisp/wp_no_btc                             6
rdisp/wp_no_vb                              2
rdisp/wp_no_vb2                             1
rdisp/wp_no_enq                             1
rdisp/wp_no_spo                             1
DIR_TRANS                                   /usr/sap/trans
ms/server_port_<xx>                          PROT=HTTP, PORT=8080
icm/server_port_0                           PROT=HTTP,PORT=8080,EXTBIND=1
DIR_ORAHOME                                 /oracle/BWD/920_64
ipc/shm_psize_10                            104000000
ipc/shm_psize_14                            0
ipc/shm_psize_18                            0
ipc/shm_psize_19                            0
ipc/shm_psize_30                            0
ipc/shm_psize_40                            114000000
ipc/shm_psize_41                            0
Is there anything obvious missing?
Thanks,
Tristan

Following seems a little odd....
ms/server_port_<xx> PROT=HTTP, PORT=8080
I would expect something like:-
ms/server_port_0 = PROT=HTTP,PORT=8102 (or other relevent port number)

Order by in MATERIALIZED VIEW not work successfully with first column (ID)

Dears,
I am trying to create a Materialized View as below:
CREATE MATERIALIZED VIEW HR.MV_EMP
PCTFREE 10
MAXTRANS 255
TABLESPACE users
STORAGE (
INITIAL 65536
MINEXTENTS 1
MAXEXTENTS 2147483645
BUILD IMMEDIATE
REFRESH ON DEMAND
AS
SELECT *
FROM employees
where rownum < 5000 order by employee_id desc ;But while querying the MATERIALIZED VIEW, it did not work successfully as the data did not appear in the accurate order.
I tried to create the same MATERIALIZED VIEW but order by another column (Column Date), it worked successfully and the data appeared in the accurate order.
It means that MATERIALIZED VIEW not work successfully with the first column (id).
Can you please help me in this ?
Thanks & regards,,

A few pointers :
1. As has been pointed out, the ROWNUM has been incorrectly placed. ROWNUM values are assigned as rows are fetched from the source before the ORDER BY. You need to ORDER BY first (in a SubQuery) and then ROWNUM afterwards (outside the SubQuery).
2. I wonder why you want only the last 5000 EMPLOYEE_IDs. What if Employee_ID 1 is still an active employee (he is the founder, first employee and CEO ?). There could be very many "low" EMPLOYEE_IDs that are still active.
3. Logically I would expect some filter other than the ROWNUM ... ORDER BY to be used to select candidate rows. Then, an ORDER BY in the CREATE query would be unnecessary.
4. When querying the Materialized View you must explicitly ORDER BY (irrespective of whether you did or did not do an ORDER BY in the CREATE ...)
5. How do you expect to refresh the MV ? Will it always be a COMPLETE Refresh ? Remember that your "5000 employees" filter would likely exclude older employees at the next refresh. If you use some other filter, it should be consistent across all refreshs.
Hemant K Chitale

SCCM 2012 R2 Report Viewer not working.

Similar Messages

Maybe you are looking for