SCCM 2012 R2 Reporting Services No Items Found
I installed the Reporting Services Point role on my sql2012 site system server. sccm is installed on my sccm primary site server. I set my network username under the reporting services point properties. My account is a full administrator on both
servers. When I click on reports under reporting on the monitoring tab it waits for a while and comes back with no reports. I checked the smsadminui.log and get the following.
[7, PID:4532][11/21/2014 08:23:44] :[ReportProxy] - User-specified default Reporting Point [SCCM.legislature.intranet] could not be found, [SQL2014-SCCM.legislature.intranet] is now the default Reporting Point.
[10, PID:4532][11/21/2014 08:23:45] :[ReportProxy] - User-specified default Reporting Point [SCCM.legislature.intranet] could not be found, [SQL2014-SCCM.legislature.intranet] is now the default Reporting Point.
[6, PID:4532][11/21/2014 08:23:45] :[ReportProxy] - User-specified default Reporting Point [SCCM.legislature.intranet] could not be found, [SQL2014-SCCM.legislature.intranet] is now the default Reporting Point.
[6, PID:4532][11/21/2014 08:24:07] :[SCCM.legislature.intranet] : Unable to connect to the remote server
[7, PID:4532][11/21/2014 08:24:28] :[SCCM.legislature.intranet] : Unable to connect to the remote server
[10, PID:4532][11/21/2014 08:24:49] :[SCCM.legislature.intranet] : Unable to connect to the remote server
[6, PID:4532][11/21/2014 08:25:10] :[SCCM.legislature.intranet] : Unable to connect to the remote server
[24, PID:4532][11/21/2014 08:37:26] :[SCCM.legislature.intranet] : Unable to connect to the remote server
[24, PID:4532][11/21/2014 08:37:47] :[SCCM.legislature.intranet] : Unable to connect to the remote server
[37, PID:4532][11/21/2014 08:39:58] :[SCCM.legislature.intranet] : Unable to connect to the remote server
[37, PID:4532][11/21/2014 08:40:19] :[SCCM.legislature.intranet] : Unable to connect to the remote server
When I right click reports and choose report options and select my sql2012 server I get the below error:
Configuration Manager
There is a problem connectiong to the specified reporting server. Please check the connection and make sure SQL reporting service is running on the specified server.
OK
Now if i login to my sql server and open the reporting services configuration manager and go to the report manager url section there are two urls:
http://sql2012-sccm:80/Reports
https://sql2012-sccm...net:443/Reports
Clicking on the http link I get your standard there is a problem with the cert click continue to this website in IE. When I click continue I get the webpage cannot be found. If i click on the https link I get
a windows security login box. I login with my user creds and it appears to work, I can get to the SQL server reporting services home page.
If i try to go to either of these pages when Im logged onto my sccm server I get page cannot be displayed.
Anyone have any ideas?
Thanks!
That is a pasting error. The server is running 2012 to be upgraded to 2014 once everything is working hence why its named 2014.
I hadn't notice that. SQL doesn't always like it what the server is renamed after SQL is install.
What exactly is the name of your SQL server now?
BTW, I don't recommend having SQL remote from CM12, too many issues.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ
Similar Messages
-
SCCM 2012 R2 - Reporting Services Point installation - "The Datasource does not exist"
Hi all,
Quick bit of background, we have SCCM 2012 R2 installed on a Windows 2012 R2 server. We have the SQL back end off box, configured on a SQL 2012 R2 server running on a Windows Server 2012 R2 cluster. Then there is yet another server which runs the reporting
services. I've just tried installing the Reporting Services Point on the srs server but it doesn't appear to have worked that well. Here's the info i've got back:
A] Site Status > Reporting services point:
SMS_SITE_SYSTEM_STATUS_SUMMERIZER
Site System Status Summarizer detected that the availability of the "Reporting services point" role on server "\\NA-SQLR01.in.tna.local" has changed to Failed.
B] The last message from the SMS_SRS_REPORTING_POINT Component Status is "Site Component Manager successfully installed this component on this site system"
C] Here's the first chunk of info which appears in the srsrp.log file:
SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT as thread ID 4204 (0x106C).
This is a SRS Reporting Point Role as SRSRP registry key exists.
Waiting for changes for 0 minutes
Timed Out...
Set configuration
Check state
Check server health.
Successfully created srsserver SMS_
Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
Reporting Services is running
The DataSource does not exist.
[sqlserver.local\SQL1] [SCCM_XXX] [ConfigMgr_XXX] [sqlreportserver.LOCAL]
[SQL2012] [1] [] [xxx\SCCM2012Server]
Confirmed version [11.0.5058.0] for the Sql Srs Instance.
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
Extract resource language packs if exists
Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
Looking for 'English (United Kingdom)' resources
Looking for 'English' resources
Found resources for 'English'
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
Item, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
Folder, String Parent, Property[] Properties)
(!) SRS root folder was reported missing
STATMSG: ID=7405 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SRS_REPORTING_POINT" SYS=sqlreportserver.LOCAL SITE=P01 PID=2120 TID=4204 GMTDATE=Wed Apr 08 08:56:05.349 2015 ISTR0="ConfigMgr_XXX" ISTR1="sqlreportserver.LOCAL"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
Registry change
Waiting for changes for 1 minutes
After this point i simply get the following info messages looping endlessly:
Set configuration
Check state
Check server health.
Successfully created srsserver
Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
Reporting Services is running
The DataSource does not exist.
[sqlreportserverlocal\SQL1] [SCCM_XXX] [ConfigMgr_P01] [sqlreportserver.LOCAL]
[SQL2012] [1] [] [XX\SCCM2012Server]
[1] [0]
Confirmed version [11.0.5058.0] for the Sql Srs Instance.
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
Extract resource language packs if exists
Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
Looking for 'English (United Kingdom)' resources
Looking for 'English' resources
Found resources for 'English'
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_P01' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
Item, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
Folder, String Parent, Property[] Properties)
(!) SRS root folder was reported missing
Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
Registry change
Waiting for changes for 1 minutes
Has anyone come across this issue before? Must admit, I'm not too hot on the sql side of things so any advice or suggestions would be greatly appreciated. Thanks in advance!Hi guys, cheers for the swift response.
Garth, i can access SSRS in IE from the SCCM box and it looks a-ok.
Paul, nope can't say I've done any configuration of reporting services - the whole thing has been set up by the database team. Having had a trundle through Reporting Services Configuration Manager, it seems the Database team have set up SSRS in line with
the walkthrough you posted.
Since i'm not seeing the ConfigMgr_XXX folder appear in SSRS I'm wondering if there's something preventing SCCM from being able to create it. The message
"Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions
granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation" sounds like the account SCCM is leveraging to perform the install might not have the right permissions in SSRS. Do i need to delegate specific rights to the NT
AUTHORITY\SYSTEM account in SRS perhaps? -
SCCM 2012 Client Software Center - no items found.
hi there,
we are using software center as self-service portal for users and it's working quite good!
unfortunely i software center displays "no items found" on a specific computer, though the pc is in the correct collection.
i have re-installed sccm client, repaired wmi repository and also re-imported the machine into sccm 2012 but still no luck.
anyone can point me on a possible solution?
thank you!Hello
we had exactly the same behavior. The Software Center shows everytime "No items found". After further tests we found that we could see applications in the Software Center, but still no packages.
After one day struggle we found the issue/solution. It seems that is not a bug, it is a feature....
Situation: Another user was logged in. It seems that the Software Center will only display packages for the first/default logged on user.
Solution: Make sure the previous user logs off completely (not just disconnected) and there are no users logged on to the machine before another user logs on.
The Applications do not have this restriction and will be displayed for all users logged on to the machine
Hope this helps -
SCCM 2012 R2 - Reporting Services question
In testing SCCM 2012, I put it on a an existing remote SQL instance. This server also housed SCOM among other applications. I set up reporting services successfully and got reports working.
A few months later I decided to setup and test reporting in SCOM for Audit Collection Services (ACS). I did not know at the time but SCOM takes over SSRS and makes it unusable for any other application. This broke my SCCM reporting. I finally reinstalled
SSRS and got rid of the SCOM piece and all is back to normal.
I am now planning for deployment in production. Our DB team wants to stick the DB for SCCM on a server that will house many other databases (eventually).
My question is: Does SCCM reporting play well with others? That is, if I set up SSRS on a SQL server with other applications - should I request that SCCM is the only application using that particular SSRS instance? Or should it be ok to reside on an SSRS
instance that may eventually house other applications (NOT SCOM).
Thanks in advance!a couple hundred clients; base specs for the primary server; and it would be a VM
With all that said, I think our DB team still wants us to use their remote SQL server (physical) so I will probably go with that as it is still supported and our environment will be relatively tiny compared to typical SCCM deployments. Of course, if there
are known issues or advisories against having a remote SQL please let me know (and provide a link).
My main concern was using this remote SQL server and setting up SSRS and having other applications conflicting with it. As long as SCCM plays well with others - I am good to go. Thanks for the replies. -
SCCM 2012 R2 Report Viewer not working.
I have recently upgraded to SCCM 2012 R2 and now when I go to the reports I get this message. Has anyone come across this?
The
DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an
error: The encryption type requested is not supported by the KDC.
(rsRuntimeErrorInExpression)I found the solution.
http://www.netdavidic.com/2013/11/how-to-fix-sccm-2012-r2-reporting.html#!/2013/11/how-to-fix-sccm-2012-r2-reporting.html -
SCCM 2012 R2 not show Threat item in Malware Detected Report.
I had no "Malware detected" items fount.
There are no report abount virus that Endpoint Protection client finds.
I try to test be creating file with this test content: "X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*", my Endpoint Protection find this file, logging it in its journal, but SCCM not show this Theat.
My computer was discovered, Endpoint Protection was automatic installed, Antimalware Policies work fine...
....but in "Monitoring/Endpoint Protection Status/System Center 2012 R2 Endpoint Protection Status" my collection with my computer(this is test collection), show me: "Endpoint Protection agent
not yet installed: 1"
There are many collection with many devices, but no one give me report about "Malware Detected", but virus was found in our company.
SCCM 2012 R2 was upgrade from older version(i have not this information).
What log must i fount about this issue?
What cat i do to fix this problem?SCEP client is installed by policy successfull.
Policy applied succesfull too.
but i guess that data do not copy from SCEP to SCCM
or data do not inserted in database.
CcmMessaging.log:
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:EFA60F96-CEE9-470B-8A3D-FD8453D1D7C2";
DateTime = "20140410103213.874000+000";
HostName = "SCCM2012.DOMAIN.LOC";
HRESULT = "0x00000000";
ProcessID = 2764;
StatusCode = 0;
ThreadID = 12908;
Could not load logging configuration for component CcmTask. Using default values.
Could not load logging configuration for component FileSystemFile. Using default values.
Supplied sender token is null. Using GetUserTokenFromSid to find sender's token.
mpfdm.log:
PULL:Worker thread [Site System Status Summarizer] checking for *.SUM files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\sitestat.box. SMS_MP_FILE_DISPATCH_MANAGER
10.04.2014 16:42:17 12200 (0x2FA8)
PULL:Worker thread [Discovery Data Manager (Trusted)] checking for *.UDR files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\ddr.box. SMS_MP_FILE_DISPATCH_MANAGER
10.04.2014 16:42:17 25480 (0x6388)
PULL:Worker thread [State System (Incoming - high priority)] checking for *.SMX files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\statemsg.box\high.
SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014 16:42:17 5660 (0x161C)
PULL:Worker thread [Status Manager] checking for *.SVF files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\stat.box. SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014
16:42:17 30604 (0x778C)
PULL:Worker thread [State System (Incoming - low priority)] checking for *.SMX files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\statemsg.box\low.
SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014 16:42:17 12176 (0x2F90)
PULL:Worker thread [Software Metering Processor Usage (Site)] checking for *.MUX files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\swm.box.
SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014 16:42:17 17576 (0x44A8)
PULL:Worker thread [State System (Incoming - high priority)] checking for *.SME files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\statemsg.box\high.
SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014 16:42:17 10552 (0x2938)
PULL:Worker thread [Successful Policy Requests] checking for *.POL files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\polreq.box. SMS_MP_FILE_DISPATCH_MANAGER
10.04.2014 16:42:17 19480 (0x4C18)
PULL:Worker thread [Notification Manager] checking for *.BOS files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\bgb.box. SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014
16:42:17 11276 (0x2C0C)
PULL:Worker thread [Software Inventory Processor (Site Trusted)] checking for *.SI? files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\sinv.box.
SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014 16:42:17 23188 (0x5A94)
PULL:Worker thread [Notification Manager] checking for *.BTS files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\bgb.box. SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014
16:42:17 17444 (0x4424)
PULL:Worker thread [State System (Incoming - low priority)] checking for *.SME files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\statemsg.box\low.
SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014 16:42:17 18876 (0x49BC)
PULL:Worker thread [Discovery Data Manager (Trusted)] checking for *.DDR files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\ddr.box. SMS_MP_FILE_DISPATCH_MANAGER
10.04.2014 16:42:17 9008 (0x2330)
PULL:Worker thread [Hierarchy Manager (Forwarding messages)] checking for *.MCM files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\MCM.box.
SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014 16:42:17 29416 (0x72E8)
PULL:Worker thread [Asset Intelligence KB Manager] checking for *.AR? files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\AIKbMgr.box. SMS_MP_FILE_DISPATCH_MANAGER
10.04.2014 16:42:17 3960 (0x0F78)
PULL:Worker thread [Discovery Data Manager (Registration)] checking for *.RDR files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\rdr.box. SMS_MP_FILE_DISPATCH_MANAGER
10.04.2014 16:42:17 11744 (0x2DE0)
PULL:Worker thread [Endpoint Protection Manager] checking for *.EPP files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\EPMgr.box. SMS_MP_FILE_DISPATCH_MANAGER
10.04.2014 16:42:17 25272 (0x62B8)
PULL:Worker thread [SMS_AMT_PROXY_COMPONENT] checking for *.APX files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\amtproxy.box. SMS_MP_FILE_DISPATCH_MANAGER
10.04.2014 16:42:17 26296 (0x66B8)
PULL:Worker thread [State System (Incoming)] checking for *.SME files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\statemsg.box. SMS_MP_FILE_DISPATCH_MANAGER
10.04.2014 16:42:17 25908 (0x6534)
PULL:Worker thread [State System (Incoming)] checking for *.SMF files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\statemsg.box. SMS_MP_FILE_DISPATCH_MANAGER
10.04.2014 16:42:17 25468 (0x637C)
PULL:Worker thread [State System (Incoming)] checking for *.SMX files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\statemsg.box. SMS_MP_FILE_DISPATCH_MANAGER
10.04.2014 16:42:17 10148 (0x27A4)
PULL:Worker thread [SMS_AMT_PROXY_COMPONENT] checking for *.OTP files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\amtproxy.box. SMS_MP_FILE_DISPATCH_MANAGER
10.04.2014 16:42:17 30220 (0x760C)
PULL:Worker thread [Distribution Manager (Incoming)] checking for *.STA files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\distmgr.box. SMS_MP_FILE_DISPATCH_MANAGER
10.04.2014 16:42:18 13872 (0x3630)
PULL:Worker thread [Distribution Manager (Incoming)] checking for *.DMD files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\distmgr.box. SMS_MP_FILE_DISPATCH_MANAGER
10.04.2014 16:42:18 30448 (0x76F0)
PULL:Worker thread [Site Server Inventory Collection] checking for *.NHM files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\hinv.box. SMS_MP_FILE_DISPATCH_MANAGER
10.04.2014 16:42:18 27100 (0x69DC)
PULL:Worker thread [Data Loader (Trusted)] checking for *.MIF files in \\SQLSRV.DOMAIN.LOC\D$\SMS\MP\OUTBOXES\hinv.box. SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014
16:42:18 2452 (0x0994)
The machine account will be used for ["Display=\\NV-WSUS.DOMAIN.LOC\"]MSWNET:["SMS_SITE=EKB"]\\NV-WSUS.DOMAIN.LOC\. SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014
16:43:43 5316 (0x14C4)
Successfully made a network connection to \\NV-WSUS.DOMAIN.LOC\ADMIN$. SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014 16:43:43 5316 (0x14C4)
NV-WSUS.DOMAIN.LOC is pushing files. Mode must be push. SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014 16:43:43 5316 (0x14C4)
Cancelling network connection to \\NV-WSUS.DOMAIN.LOC\ADMIN$. SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014 16:43:43 5316 (0x14C4)
Successfully logged on user DOMAIN.LOC\sccm-installer (Token = 00000000000032FC) and impersonated for accessing ["Display=\\SQLSRV.DOMAIN.LOC\"]MSWNET:
["SMS_SITE=EKB"]\\SQLSRV.DOMAIN.LOC\. SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014 16:43:43 5316 (0x14C4)
Successfully made a network connection to \\SQLSRV.DOMAIN.LOC\ADMIN$. SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014 16:43:43 5316 (0x14C4)
Pulling files from SQLSRV.DOMAIN.LOC. Mode must be pull. SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014 16:43:43 5316 (0x14C4)
Cancelling network connection to \\SQLSRV.DOMAIN.LOC\ADMIN$. SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014 16:43:43 5316 (0x14C4)
Reverting current impersonation. SMS_MP_FILE_DISPATCH_MANAGER 10.04.2014 16:43:43 5316 (0x14C4)
statesys.log:
CMessageProcessor - Processing file: g1a2vm9n.SMX SMS_STATE_SYSTEM 10.04.2014 16:43:13 25096 (0x6208)
*** *** Unknown SQL Error! SMS_STATE_SYSTEM 10.04.2014 16:43:13 25096 (0x6208)
CMessageProcessor - Encountered a non-fatal SQL error while processing SMS_STATE_SYSTEM 10.04.2014 16:43:13 25096 (0x6208)
CMessageProcessor - Non-fatal error while processing g1a2vm9n.SMX SMS_STATE_SYSTEM 10.04.2014 16:43:13 25096 (0x6208)
STATMSG: ID=6104 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_STATE_SYSTEM" SYS=SCCM2012.kontur SITE=EKB PID=6388 TID=25096 GMTDATE=Чт апр 10 10:43:13.059 2014
ISTR0="g1a2vm9n.SMX" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_STATE_SYSTEM 10.04.2014 16:43:13
25096 (0x6208)
Thread "State Message Processing Thread #0" id:25096 was unable to process file "C:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\process
\g1a2vm9n.SMX", moving to corrupt directory. SMS_STATE_SYSTEM 10.04.2014 16:43:13 25096 (0x6208) -
Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before. -
Hi there
Trying to patch a new Windows 7 SP1 image within SCCM 2012 SP1, but it's failing.
I've searched for information on the failure messages I am seeing, but although there is a LOT of information online concerning Offline Servicing failures, I can't find anything on the errors I am seeing.
I've tried injecting a single update, five updates and ten updates, no difference, same messages.
We have McAfee Access Protection disabled, as we know Offline Servicing simply won't work if this is running.
In the console, in Schedule Update Status for the image I am trying to update, the following message is shown:
"Failed to find or access the update binaries to be applied on the image."
That sounds as if the process can't find the actual .cab file for any update I've tried to inject, but I don't know why it wouldn't be able to do that, we have Software Updates configured and the .cab files are on the same server.
When I looked at the OfflineServicingMgr.log file, I see the following entries:
Processing image at index 1 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:52:49 8272 (0x2050)
Mounting image at index 1. Image file='D:\ConfigMgr_OfflineImageServicing\PackageID\W7_Image.wim', MountDirectory='D:\ConfigMgr_OfflineImageServicing\PackageID\ImageMountDir', ImageFileType='WIM', Mode='ReadWrite' SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:52:49 8272 (0x2050)
Image OS information : MajorVersionMS = 6, MinorVersionMS = 1, MajorVersionLS = 7601, MinorVersionLS = 17514 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31
8272 (0x2050)
Failed to find properties of file 4 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31 8272 (0x2050)
UnMounting Image (Commit Changes = 0) ... SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31 8272 (0x2050)
Completed processing image package PackageID. Status = Failed SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Updated history for image package PackageID in the database SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Schedule processing failed SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Processing completed for Schedule with ID 16777237 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
STATMSG: ID=7910 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_OFFLINE_SERVICING_MANAGER" SYS=SCCMServer.domain SITE=Site_Code PID=8560 TID=8272 GMTDATE=Sat Jun 14 13:54:04.964 2014 ISTR0="16777237" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:54:04 8272 (0x2050)
Schedule processing thread stopped SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:05 8272 (0x2050)
I'm not sure what file "Failed to find properties of file 4" is referring to, whether dism.exe, an update or the image itself, but immediately after this message appears the image is unmounted. After that this message shows:
"Completed processing image package PackageID. Status = Failed"
As I say, there's a lot of information available re Offline Servicing but I haven't found anything with these particular messages.
If anyone has encountered this before, I'd appreciate any information you have.
Regards,
John.Hi,
I think file named 'NO_SMS_ON_DRIVE.SMS’ might be causing this issue. If this file is present in logical drives, then please give it a shot one more time after deleting this file from the logical drives.
Due to this file, it might be preventing 'smsexec' service to skip the drive when looking for content. So worth a try!
After deleting this file, you also need to restart 'smsexec' service to reflect the changes. You can also verify from below registry value & ensure that all of your logical drives (specially where SCCMContentLib directory resides) should be listed
over there
'HKLM\Software\Microsoft\SMS\DP\ContentLibUsableDrives'
Hope this will help!
Cheers | Navdeep Sidhu -
SCCM 2012 R2 Reporting issue updating SQL Reporting permissions
I am in the process of setting up SCCM 2012 R2. I am having an issue with the SCCM reporting. If I set the permissions in the SCCM console, the permissions do not propagate to the SQL reporting... I get this... This is from SRSRP.log...
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_DIT $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.384+300><thread=5432 (0x1538)>
(!) Error retrieving folders - [A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The target principal name is incorrect.)]. $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.438+300><thread=5432 (0x1538)>
No folder configuration information found. $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.441+300><thread=5432 (0x1538)>
Does anyone know how to fix?
I tried removing and re-installing the reporting point, changing the permissions in SQL Server... and a dozen other things.I am in the process of setting up SCCM 2012 R2. I am having an issue with the SCCM reporting. If I set the permissions in the SCCM console, the permissions do not propagate to the SQL reporting... I get this... This is from SRSRP.log...
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_DIT $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.384+300><thread=5432 (0x1538)>
(!) Error retrieving folders - [A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The target principal name is incorrect.)]. $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.438+300><thread=5432 (0x1538)>
No folder configuration information found. $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.441+300><thread=5432 (0x1538)>
Does anyone know how to fix?
I tried removing and re-installing the reporting point, changing the permissions in SQL Server... and a dozen other things. -
hi all,
some report I can open and others I get an error:
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
Microsoft.Reporting.WinForms.ReportServerException
Cannot read the next data row for the dataset DataSet1. (rsErrorReadingNextDataRow)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
Microsoft.Reporting.WinForms.ReportServerException
Conversion failed when converting the nvarchar value 'S-1-5-21-159793906-1513374725-7473742-7662' to data type int.
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
how can I solve this error?
thanksI had the exact same problem.
I found 2 solutions to this, where the first solution was temporary.
Try to change the RegKey HKLM\SOFTWARE\Microsoft\SMS\SRSRP\EnableRbacReporting from 1
à 0. Then run the report again, it should run normally. In my case it did change back to 1 after some time and turned out to be a temporary fix. But it provided an explanation why this happened
after the R2 upgrade and actually it breaks the new reports RBAC feature of R2.
The second solution I found in this thread:
http://social.technet.microsoft.com/Forums/en-US/ae08aa43-054d-47e7-99fb-c4f101962478/reports-not-working-after-upgrade-to-sccm-2012-r2-?forum=configmanagergeneral
Just read the explanation and run the mofcomp command.
It did the trick for me J -
Trouble Installing 2012 R2 Reporting Services - Version Mismatch Error in logs
I recently upgraded an instance of SCOM 2012 SP1 to 2012 R2.
I got no errors installing the all of the components except for the reporting services.
As part of my troubleshooting, I ended up just uninstalling the SP1 version of reporting services and just tried a fresh install of R2 Reporting Services.
When installing reporting services, I get to the step it asks you to put in your management server. I do that, and I get an error about the versions not matching. If I look in the OpsMGrSetupWizard.txt in the setup logs, I see the following error.
Error:The management server is a different version than the current setup build. Please use a different management server or the correct version of setup. Server Version: 7.0.9538.0
On both of my management servers, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Setup shows 7.1.10226.0 for currentversion, ServerVersion and UIVersion
I've tried running the install from the Action account, the SDK Account and my own account, all having admin privileges on the system, same error. I've run the resetSRS.exe against the SQL server in case there were leftovers from the previous SP1 install
of reporting services.
My searches here and google haven't found anything that has helped.OK, after digging around some more I found the following.
In the SCOM Console, my management servers were still in maintenance mode from the upgrade somehow, and in the agent managed section for management servers, the version still listed the 7.0.9538.0 version. I removed them from maintenance mode, and within
a few minutes their returned to a monitored state, and the version updated to the 7.1.10226.0 version.
Once that was up to date, I reran the reporting services install on my db server, and it went through properly.
So it looks like the reporting services install is dependent on some part of the management servers updating their version in the db. -
SCCM 2012 SP1 Report Permissions required
Hello Everyone.. Im having trouble running any reports off of the SCCM Console. So far I have full permissions in the SCCM console, and on SQL Server I am a sysadmin. Here is my error when I run it through report builder:
System.Web.Services.Protocols.SoapException: The permissions granted to user 'DTTLA\eguerrero' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DTTLA\eguerrero' are insufficient for performing this operation. at Microsoft.ReportingServices.Library.ReportingService2010Impl.CreateReportEditSession(String Report, String Parent, Byte[] Definition, String& EditSessionID, Warning[]& Warnings) at Microsoft.ReportingServices.WebServer.ReportingService2010.CreateReportEditSession(String Report, String Parent, Byte[] Definition, String& EditSessionID, Warning[]& Warnings)----------------------------The permissions granted to user 'DTTLA\eguerrero' are insufficient for performing this operation.
And here is the error when I run it through the Configuration Manager:
Microsoft.Reporting.WinForms.ReportServerExceptionAn error has occurred during report processing. (rsProcessingAborted)Stack Trace: at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report) at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation() at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation() at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)-------------------------------Microsoft.Reporting.WinForms.ReportServerExceptionCannot impersonate user for data source 'AutoGen__5C6358F2_4BB6_4a1b_A16E_8D96795D8602_'. (rsErrorImpersonatingUser)Stack Trace: at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report) at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation() at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation() at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)-------------------------------Microsoft.Reporting.WinForms.ReportServerExceptionLog on failed. Ensure the user name and password are correct. (rsLogonFailed)Stack Trace: at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report) at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation() at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation() at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)-------------------------------Microsoft.Reporting.WinForms.ReportServerExceptionThe user name or password is incorrectStack Trace: at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report) at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation() at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation() at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)-------------------------------
Does anyone have an idea where I'm forgetting to assign permissions?Check the properties of your Reporting Point. See the user that is configured to connect to the data source. This user must have a SQL login (eg sysadmin)
See here
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/dc47c82b-41aa-4b6a-990f-0c0264aa33a2/error-message-when-trying-to-open-reports-on-the-sccm-2012-console-and-ie-browser-sql-server-2008
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
SCCM 2012 R2 Reports not activate Value button and not showing Visio and Project products
Hello,
I have experiencing some problems with SCCM reports
1) In some of the reports the "Values" button is disabled and because of that I can not select the name of a specific computer, the reports I've noticed that are relating to Specific Computers
2) The other problem is that when reviewing a software inventory report on a specific computer, Visio nor the Project of Microsoft Office does not appear , which itself can be seen from the Resource Browser
I will appreciate it very much to help me to solve these drawbacks presented in the reports of SCCM 2012 R2.
Thanks in advance.
Manuel
Manuel´s Microsoft Forums Threadsopen the report in the report builder tool (in the console, right click and edit. From the reports web page you can click the drop down and choose open with report builder) and examine the query that is being used to populate the computername
values list. You should be able to run that query from the report builder utility to see if anything is being returned. For the report you mention, there is no query to bring back computer names. In report builder, in the left hand menu, open the parameters
folder, then right click @variable from the list and open the properties. Go to the available values item in the menu of the properties window and notice that the available values is set to none, not get values from a query. That is why you can't click on
Values in the SSRS report and get a list of computer Names. You could add a query into the report and save the report if you really want a drop down list of all computer names. I would save the report with a different name if I were to take that approach,
it is not a good practice to modify the built in reports.
Regarding the applications you are not seeing, you will have to look at the query contained in the report, and determine if that query is targeting the same view or data that you were looking at using resource explorer. Which category within resource
explorer were you seeing the information you were expecting to see in this report? You can use report builder to see that the report you are looking at is calling a function to return the software titles, and that function looks to be based on the v_gs_softwareproduct
view. If you were looking at software files or add/remove programs within the resource viewer, you won't necessarily see the same information in the report, since the report is reading a different view.
I hope this info will help you to troubleshoot report quirks. SCCM 2012 reporting is a world apart from SCCM 2007 reporting. There are alot more stored procedures and functions used in SCCM 2012, and even a dll file on the reporting point that is required
for some (most) of the reports! -
SQL 2012 SP1 Reporting Services for SharePoint (2013) - Install-SPRSService Not Available
So, at this point, I've blown away an otherwise functional SP2013 + SQL2012SP1 multi-server farm trying to get this to work, only to end up with the same results. Irrespective of whether I install Reporting Services before or after the SP2013 server is in
a farm, SSRS does not seem to be enabled in the farm. I cannot add a new SSRS service application (the menu item does not exist); I cannot start the SSRS service on server (because it isn't here); I cannot execute the Install-SPRSService cmd in SP (yes, the
SharePoint) Powershell (PS comes back with this error:
Install-SPRSservice : The term 'Install-SPRSservice' is not recognized as the
name of a cmdlet, function, script file, or operable program. Check the
spelling of the name, or if a path was included, verify that the path is
correct and try again.
At line:1 char:1
+ Install-SPRSservice
+ ~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Install-SPRSservice:String) [],
CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Quite simply, something's broken. I've followed a couple of detailed how-to's on technet and elsewhere... Right at the point when I should be able to create the SSRS service application, the wheels come off the cart. I've tried Import-Module'ing the SQLCMDLETS
and SQLPS PS modules...nothing... The strange thing is that after the installation of the SSRS, if I happen to go into the General Application Settings in Central Admin, I see a new item after Content Deployment:
$Resources:ReportServerResources,AdminReportServerGroupTitle;
$Resources:ReportServerResources,ManageIntegrationSettings; |
$Resources:ReportServerResources,AddTrustedAccounts; |
$Resources:ReportServerResources,SetServerDefaults;
When I uninstall, this goes away.
Greatly appreciate any suggestions you can offer because this is driving me crazy, and I have tried everything I can think of to get this going...Make sure you are running SharePoint 2010 Management Shell not PowerShell.
Also make sure you are running SharePoint 2010 Management Shell with administrator privileges. Right click the icon and click, "Run As Administrator".
You must have installed "Reporting
Services add-in for SharePoint Products" on the server where you are executing "Install-SPService".
You also may be interested to check this tutorial: Install
Reporting Services SharePoint Mode for SharePoint 2013 -
SCOM 2012 R2 Reporting services installation error - data reader account
I have successfully installed SCOM 2012 R2 and SQL 2012 SP1 on the same server. I was trying to install the reporting server piece of SCOM.
When I get to the part that asks for a domain account, I get this error:
"Data Reader account provided is not same as that in the management server"
The account is not the same as the management server, and it does have read access to the data warehouse and reporting databases. Is there some other permission this account needs for reporting services?
Thanks.Adding more info：
I usually create the following account for SQL:
AD accounts for the following to be used with SQL Services:
SQL Agent for SQL Server Agent
SQL Analysis Services for SQL Server Analysis
SQL Database Engine for SQL Server Database Engine
SQL Reporting Services for SQL Server Reporting Services
For SCOM I create the following accounts:
SCOM DR - Used to deploy reports
SCOM DWR - for writing data from the management server to the reporting DW
SCOM MSA - Performs default actions
SCOM SDK - Used for updating/reading information from the operations Manager Database - Needs to be local administrator on the SCOM server
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
Installing oracle 10g release 2 on spark solaris!! urgent help!
hi guys! Am installing oracle 10g r2 on spark sun solaris. I did install the software without any pb, but when installing the database using dbca, I have this errors. ORA-27154: post/wait create failed ORA-27300: OS system dependent operation:semget
-
DataOutputStream appears to be buffering and then overflowing?? 10 Duke Pts
Hi folks, Hope someone can help. I am trying to put together a file upload applet (yes I know....security this and signing that and so on...). It "works" (erm...kind of) using the JFileChooser and JProgressMonitorInputStream to carry out an HTTP post
-
Trying to restored my 4s but I get an unknown error occured (9)
trying to restore my 4s but i get an unknow error occured (9)
-
Does anyone know how I can assign a digital signature to a PDF document, a word or pages document or an email message using Snow leopard? Thanks OF
-
XLR - 'Security settings in Microsoft Excel prohibit XL Reporter to run'
Dear All, Our customer is on SAP2007 and EXCEL 2007. When I import a XLR and run it, I got the error message in the short text. SAP notes 853821 and 924561 are for EXCEL 2003. Can anybody let me know what setting I should check for EXCEL 2007? Thanks