SCCM 2012 R2 Secondary site server will support the DMZ Zone?

We are planning for SCCM 2012 Migration, currently we have separate Primary server in DMZ.
Kindly suggest what is the best method to deploy in the DMZ (separate primary or secondary or DP) because we have only 500 Client in DMZ.

Hi,
There is a blog talking about this error. You could try the method in the blog.
To summarise, when installing SCCM 2012 SP1 secondary site on a pre-configured SQL 2012 instance regardless which SQL edition is being used, “NT AUTHORITY\SYSTEM” account needs to be given
securityadmin and sysadmin rights. If SQL Express is used, there are few additional steps need to be carried out to configure the SQL TCP connection as documented in my previous blog:
http://blog.tyang.org/2012/04/09/installing-sccm-2012-rtm-secondary-site-using-a-pre-installed-sql-express-2008-r2-instance/
Installing SCCM 2012 SP1 Secondary Site with a Pre-Configured SQL 2012 Instance
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • SCCM 2012 SP1 Secondary Site installation Fails

    Hi.
    I have multiple secondary sites when i am  trying to install  new SCCM 2012 Secondary site server remotely but installation status shows a pending from last few days.
    1) SEC server have privilages on System managent container
    2) Primary site Server account and computer have local admin right on SEC server
    hman logs says the following error message
    Cannot get SQL Certificate from site xxx
    CheckParentSQLServerCertificate: Failed to get SQL certificate for site XXX
    1) Deleted the secondary site and reinstalled the site with different Site code but no luck
    2) Able to telnet 1433 and 4022 from both primary to secondary and vice versa
    3) SQL server Configuration Manager , TCP IP port was set to 1433.
    please let me know if any thing i am missing
    Thanks

    Hi Guys
    Exact same problem as described above:
    Been told to install SQL Express manually first, but even after that, we continued to get the same problem.
    The SQL Communication between the 2 sites doesn't seem to work.
    I noticed that the Primary's SQL Security Account doesn't get created on Primary DB, in the Database replication the link has not yet been created either.
    The "Exec spDrsSendSubscriptionInvalid 'Secondary 3 digit site code','Primary 3 digit site code','configuration data'" worked on 1 Secondary, but fails on all the rest.
    Uninstalling/Installing the Secondary doesn't work either.
    HMAN.LOG:
    Update site server active directory informtion into DB SMS_HIERARCHY_MANAGER 2013/07/28 09:51:12 AM 7964 (0x1F1C)
    CheckSQLServiceRestart : SQL Service hasn't been restart since last time we check, skip it. SMS_HIERARCHY_MANAGER 2013/07/28 09:51:12 AM 7964 (0x1F1C)
       Time to verify if the parent['PRI-SITECODE'] sql server certificate is still valid on site ['SEC-SITECODE'] sql server. SMS_HIERARCHY_MANAGER 2013/07/28 09:51:12 AM 7964 (0x1F1C)
    Cannot get SQL Certificate from Site 'PRI-SITECODE'. SMS_HIERARCHY_MANAGER 2013/07/28 09:51:12 AM 7964 (0x1F1C)
    CheckParentSQLServerCertificate: Failed to get SQL certificate for site PM2 SMS_HIERARCHY_MANAGER 2013/07/28 09:51:12 AM 7964 (0x1F1C)
    Any ideas would be appreciated.

  • SCCM 2012 R2 - Secondary site in other forest

    Hello,
    I've a question about secondary site deployment. Currently, we've a standard sccm infrastructure with only one primary site.
    We want to integrate a distant site with low  bandwith and in a other forest. This forest is administrate by someone on site. That people must have SCCM administration rights only for his forest.
    Secondary Site is it the best method to isolate sccm rights administration ? (Maybe easier with only one Distribution Point ?)
    Secondary Site must be in the new forest or must be in the primary site forest ?
    Thank you !
    Jérémy

    A secondary site in another forest requires a trust.
    "Secondary Site is it the best method to isolate sccm rights administration ?" --> not at all! Secondaries do not add an administrative boundary. Even primaries don't. Use RBA (role based access) instead. How many clients are in each forest? Define
    "low bandwidth".
    Torsten Meringer | http://www.mssccmfaq.de

  • SCCM 2012 R2 Secondary Site SQL Express Prerequisites

    Reading Microsoft's 2012 R2 Upgrade checklist (technet.microsoft.com/en-us/library/jj822981.aspx#BKMK_UpgradeR2Checklist ) it says that Secondary Sites now require SQL Server Express 2012 CU2 for new site installs.  Is this also true for Secondary
    sites prior to the upgrade from SP1 to R2?  Does a non R2 SCCM Seconday work with/support SQL Express 2012 CU1?
    Any help would be appreciated.
    Thanks
    Dave

    According to the supported sql version list, a minimum of CU2 is required. See:
    http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigSQLDBconfig
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Configure SUSDB_log.ldf Autogrowth Size on SCCM 2012 Standalone Primary Site Server

    I have configured the rest of my .ldf log files for SCCM use according to best practices by SCCM MVPs, but I have not read anywhere that states how I should go about configuring the auto growth for the WSUS database log file (susdb_log.ldf) itself.
    If someone can offer some guidance here, I would greatly appreciate it.
    Thanks

    Thanks Torsten. 
    So after I run the first full sync, I can just use that value to set the initial size like you stated and then use some other value to set the growth rate? There is only about 1,000 clients in this organization and I want to get this WSUS db log file configured
    prior to installing the SCCM primary site on the server. I have used Kent Agerlund's instructions on pre-configuring the SCCM 2012 R2 database and everything looks good there, but just wanted to know how to go about NOT using that 2TB default limit on the
    SUSDB_log. What is a good rule of thumb to use to determine the file growth value? Like 2x or 3x the initial value size? 
    Thanks

  • SCCM 2012 R2 Secondary Site client assignment

    I have been doing some research and discovered that you shouldn't directly assign a boundary group to a secondary site. This confuses me a little bit and I was hoping someone can clear it up a bit.
    Currently my client has a primary site (PS1) and a secondary site (SS1) in their environment. The reason for the secondary site is because there is a site with around 700 clients and that exceeded the comfort level of a distribution point. This site is located
    in Valley Forge and we want all clients in this boundary group to use the secondary site. Everywhere else should use primary.
    With that being said and after reading what I read, should I not directly assign the boundary group for Valley Forge to the secondary site? If not, how does the client know to use it? And better yet, what is the point of having the option to directly assign
    to SS1 if it shouldn't be done?
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

    Jorgen, thank you for the link. This was the original post I read that rocked my world:) I just wanted to get more info on the subject and make sure it was still relevant.
    MadLuka, much appreciate the explanation. Just when you think you know something somebody comes along and proves you wrong. Is there anything that I need to do for the VF clients to establish the understanding that they will need to use the SS like
    assign it as a site system for content management? Even better should I include all site systems (PS and SS) within that content management so that they will use the PS when they roam outside of that boundary?
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Procedure performing a "Retry Secondary Site" Operation in SCCM 2012 R2 Secondary Server

    Dear Brother,
    My SCCM 2012 R2 Secondary Site Server, unfortunately crashed and required to be restored, doing this I end up performing a "Retry Secondary Site Operation.
    One by one I am clearing out the errors but there are few remaining errors on the prerequisite checks:
    1.[Failed]:The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service name> or LOCAL SERVICE.  You must configure the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
    Actions Done: SQL Related Services use Logon As Domain Account "Microsoft-Domain\BillAdmin" , but still the above message still appears in the logs.
    Actions Done: None
    2.[Failed]:The collation of the site database does not match the collation of the parent site's database.  All sites in a hierarchy must use the same database collation.
    3.[Failed]:The site server might be unable to publish to Active Directory. The computer account for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have
    manually verified these permissions. For more information about your options to configure required permissions, see
    http://go.microsoft.com/fwlink/p/?LinkId=233190.
    Actions Done: None, as this machine is previously a working Secondary site for 1 Year already. So I do not suspect anything from the current related configuration.
    4.[Failed]: Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions.
    Setup cannot continue.
    Action Taken:  Domain Account "Microsoft-Domain\BillAdmin" has a
    Sysadmin roles and actually all the check boxes are chosen to acquire all SQL account roles" 
    5. [Failed]:Prerequisite checks complete with failure - check ConfigMgrPrereq.log
    in the root of the primary site server system drive.
    6[Failed]:Unable to complete secondary site server installation - check ConfigMgrSetup.log in the root of the secondary site server system drive.
    ConfigMgrPrereq.log-Start
    ?<12-27-2014 23:39:35> ********************************************
    ?<12-27-2014 23:39:35> ******* Start Prerequisite checking. *******
    ?<12-27-2014 23:39:35> ********************************************
    ?<12-27-2014 23:39:35> Commandline :
    "E:\Program Files\Microsoft Configuration Manager\bin\x64\smsexec.exe"
    ?<12-27-2014 23:39:35> Check Type: Secondary site
     Site Server: SecondarySite2.microsoft.com,
     SQL Server: SecondarySite2.microsoft.com,
     SQL Named Instance: MSSQLSERVER,
     Install Folder: E:\Program Files\Microsoft Configuration Manager\,
     Setup Source Folder: E:\Source\SCCM2012-R2
    ?<12-27-2014 23:39:35> INFO: Executing prerequisite functions...
    ?<12-27-2014 23:39:35> ===== INFO: Prerequisite Type & Server: SITE_SEC:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:39:35> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:39:35> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:39:35> INFO: CheckLocalSys is Admin of <SecondarySite2.microsoft.com>.
    ?<12-27-2014 23:39:43> SecondarySite2.microsoft.com;    Site server computer account administrative rights;    Passed
    ?<12-27-2014 23:39:43> <<<RuleCategory: System Requirements>>>
    ?<12-27-2014 23:39:43> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    ?<12-27-2014 23:39:43> INFO: Check Lanman service: <SecondarySite2.microsoft.com>.
    ?<12-27-2014 23:39:44> SecondarySite2.microsoft.com;    Check Server Service is running;    Passed
    ?<12-27-2014 23:39:45> INFO: OS version:601, ServicePack:1.
    ?<12-27-2014 23:39:46> INFO: Target computer is a Windows server.
    ?<12-27-2014 23:39:46> SecondarySite2.microsoft.com;    Unsupported site server operating system version for Setup;    Passed
    ?<12-27-2014 23:39:46> SecondarySite2.microsoft.com;    Domain membership;    Passed
    ?<12-27-2014 23:39:47> INFO: Free disk space on target
    \\SecondarySite2.microsoft.com\E$\. = 83157 MB
    ?<12-27-2014 23:39:47> SecondarySite2.microsoft.com;    Free disk space on site server;    Passed
    ?<12-27-2014 23:39:47> SecondarySite2.microsoft.com;    Pending system restart;    Passed
    ?<12-27-2014 23:39:48> INFO: The server SecondarySite2.microsoft.com is not read-only domain controller.
    ?<12-27-2014 23:39:48> SecondarySite2.microsoft.com;    Read-Only Domain Controller;    Passed
    ?<12-27-2014 23:39:48> INFO: Check FQDN Length for site server: <SecondarySite2.microsoft.com>.
    ?<12-27-2014 23:39:48> SecondarySite2.microsoft.com;    Site Server FQDN Length;    Passed
    ?<12-27-2014 23:39:48> <<<RuleCategory: Dependent Components>>>
    ?<12-27-2014 23:39:48> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    ?<12-27-2014 23:39:48> SecondarySite2.microsoft.com;    Microsoft XML Core Services 6.0 (MSXML60);    Passed
    ?<12-27-2014 23:39:49> SecondarySite2.microsoft.com;    Microsoft Remote Differential Compression (RDC) library registered;    Passed
    ?<12-27-2014 23:39:49> INFO: Checking Windows Installer version on SecondarySite2.microsoft.com.
    ?<12-27-2014 23:39:50> INFO: Path of Windows Installer is <\\SecondarySite2.microsoft.com\C$\Windows\system32\msi.dll>.
    ?<12-27-2014 23:39:51> INFO: Msi.dll version is: <5.0.7601.17807> .
    ?<12-27-2014 23:39:51> SecondarySite2.microsoft.com;    Microsoft Windows Installer;    Passed
    ?<12-27-2014 23:39:51> INFO: Start Checking InstallSQLExpress on site server: SecondarySite2.microsoft.com, SQL Server instance MSSQLSERVER
    ?<12-27-2014 23:39:51> INFO: SQL Server Express installation was not selected.
    ?<12-27-2014 23:39:51> SecondarySite2.microsoft.com;    SQL Server Express on Secondary Site;    Passed
    ?<12-27-2014 23:39:52> SecondarySite2.microsoft.com;    Existing Configuration Manager server components on site server;    Passed
    ?<12-27-2014 23:39:52> SecondarySite2.microsoft.com;    Firewall exception for SQL Server (stand-alone primary site);    Passed
    ?<12-27-2014 23:39:52> INFO: SQL Server computer <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:39:52> INFO: SQL Server named instance <MSSQLSERVER>
    ?<12-27-2014 23:39:53> SecondarySite2.microsoft.com;    SQL Server service running account;    Error;    The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service
    name> or LOCAL SERVICE.  You must configure the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
    ?<12-27-2014 23:39:53> INFO: SQL Server computer <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:39:53> INFO: SQL Server named instance <MSSQLSERVER>
    ?<12-27-2014 23:39:53> INFO: Cannot connect to registry key.
    ?<12-27-2014 23:39:53> SecondarySite2.microsoft.com;    Dedicated SQL Server instance;    Passed
    ?<12-27-2014 23:39:53> INFO: CheckSQLCollationSecondary
    ?<12-27-2014 23:39:53> INFO: Collation on <PrimarySite2DB.microsoft.com> <SQL_Latin1_General_CP1_CI_AS>
    ?<12-27-2014 23:41:27> ERROR: failed to get collation from secondary site
    ?<12-27-2014 23:41:27> SecondarySite2.microsoft.com;    Parent/child database collation;    Error;    The collation of the site database does not match the collation of the parent site's database.  All
    sites in a hierarchy must use the same database collation.
    ?<12-27-2014 23:41:27> INFO: Checking .NET framework versions 3.5...
    ?<12-27-2014 23:41:28> INFO: .NET is installed
    ?<12-27-2014 23:41:28> SecondarySite2.microsoft.com;    Minimum .NET Framework version for Configuration Manager site server;    Passed
    ?<12-27-2014 23:41:28> INFO: Skipping check for .NET version, user did not select to install SQL Server Express for Secondary Site.
    ?<12-27-2014 23:41:28> SecondarySite2.microsoft.com;    Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site;    Passed
    ?<12-27-2014 23:41:28> INFO: CheckInstallSourceVersion <E:\Source\SCCM2012-R2>
    ?<12-27-2014 23:41:29> SecondarySite2.microsoft.com;    Setup Source Version;    Passed
    ?<12-27-2014 23:41:29> INFO:CheckInstallSourcePath <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:14> SecondarySite2.microsoft.com;    Setup Source Folder;    Passed
    ?<12-27-2014 23:42:14> INFO: Enter CheckSecSiteSqlOnSameMachine.
    ?<12-27-2014 23:42:14> INFO: Target secondary site Machine <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:14> INFO: SQL Server computer <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:14> SecondarySite2.microsoft.com;    SQL Server on the Secondary Site Computer;    Passed
    ?<12-27-2014 23:42:14> INFO:CheckSupportedFQDNFormat <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:15> INFO: NetBIOS <SECONDARYSITE2>
    ?<12-27-2014 23:42:15> SecondarySite2.microsoft.com;    Primary FQDN;    Passed
    ?<12-27-2014 23:42:15> INFO:CheckMachineAccountHasADAccess <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:40> ERROR: Site server does not have create child permission on AD 'System Management'
    ?<12-27-2014 23:42:40> WARN: Site server does not have delete child permission on AD 'System Management'
    ?<12-27-2014 23:42:40> SecondarySite2.microsoft.com;    Verify site server permissions to publish to Active Directory.;    Warning;    The site server might be unable to publish to Active Directory. The computer
    account for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure
    required permissions, see
    http://go.microsoft.com/fwlink/p/?LinkId=233190.
    ?<12-27-2014 23:42:40> INFO:CheckRemoteWMIConnection <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:48> SecondarySite2.microsoft.com;    Remote Connection to WMI on Secondary Site;    Passed
    ?<12-27-2014 23:42:48> INFO: Check required collation of Sql Server.
    ?<12-27-2014 23:42:48> INFO: LangID <409>
    ?<12-27-2014 23:42:48> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
    ?<12-27-2014 23:42:48> SecondarySite2.microsoft.com;    Required SQL Server Collation;    Passed
    ?<12-27-2014 23:42:48> ===== INFO: Prerequisite Type & Server: SQL:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:42:48> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:42:48> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:42:48> INFO:RemoteCheckAdminOnSQL <SecondarySite2.microsoft.com>, SQL Server <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;    SQL Server sysadmin rights;    Error;    Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions
    on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions. Setup cannot continue.
    ?<12-27-2014 23:44:33> ===== INFO: Prerequisite Type & Server: MP:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:44:33> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:44:33> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;    Administrative share (Site system);    Passed
    ?<12-27-2014 23:44:33> INFO:CheckSiteSystemtoSQLConnectivity <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:44:33> INFO: Installing secondary site, skipping SQL Server connectivity check.
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;    Site System to SQL Server Communication;    Passed
    ?<12-27-2014 23:44:33> <<<RuleCategory: System Requirements>>>
    ?<12-27-2014 23:44:33> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    ?<12-27-2014 23:44:33> INFO: The rule 'Check Server Service is running' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:34> INFO: OS version:601, ServicePack:1.
    ?<12-27-2014 23:44:35> INFO: Target computer is a Windows server.
    ?<12-27-2014 23:44:35> SecondarySite2.microsoft.com;    Unsupported management point operating system version for Setup;    Passed
    ?<12-27-2014 23:44:35> INFO: The rule 'Domain membership' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:36> INFO: Windows Cluster not found on SecondarySite2.microsoft.com.
    ?<12-27-2014 23:44:36> SecondarySite2.microsoft.com;    Windows Failover Cluster;    Passed
    ?<12-27-2014 23:44:36> INFO: The rule 'Pending system restart' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:36> <<<RuleCategory: Dependent Components>>>
    ?<12-27-2014 23:44:36> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    ?<12-27-2014 23:44:36> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:36> SecondarySite2.microsoft.com;    IIS service running;    Passed
    ?<12-27-2014 23:45:35> INFO: CheckWebSvcExtnRemote, result:<7>.
    ?<12-27-2014 23:45:35> SecondarySite2.microsoft.com;    BITS installed;    Passed
    ?<12-27-2014 23:47:00> INFO: CheckWebSvcExtnRemote, result:<7>.
    ?<12-27-2014 23:47:01> WARN: BITS Service is not running on SecondarySite2.microsoft.com.
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    BITS enabled;    Passed
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    IIS HTTPS Configuration for management point;    Passed
    ?<12-27-2014 23:47:01> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    Firewall exception for SQL Server for management point;    Passed
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    Administrative rights on management point;    Passed
    ?<12-27-2014 23:47:01> INFO:CheckV4ClientNotInstalled <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:47:45> SecondarySite2.microsoft.com;    Client Version on Management Point Computer;    Passed
    ?<12-27-2014 23:47:45> ===== INFO: Prerequisite Type & Server: DP:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:47:45> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:47:45> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:47:45> <<<RuleCategory: System Requirements>>>
    ?<12-27-2014 23:47:45> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    Unsupported distribution point operating system version for Setup;    Passed
    ?<12-27-2014 23:47:47> INFO: The rule 'Domain membership' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> INFO: The rule 'Windows Failover Cluster' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> INFO: The rule 'Pending system restart' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> <<<RuleCategory: Dependent Components>>>
    ?<12-27-2014 23:47:47> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    Microsoft XML Core Services 6.0 (MSXML60) for distribution point;    Passed
    ?<12-27-2014 23:47:47> INFO: The rule 'IIS service running' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    IIS HTTPS Configuration for distribution point;    Passed
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    Administrative rights on distribution point;    Passed
    ?<12-27-2014 23:47:48> ***************************************************
    ?<12-27-2014 23:47:48> ******* Prerequisite checking is completed. *******
    ?<12-27-2014 23:47:48> ***************************************************
    ?<12-27-2014 23:47:48> INFO: Updating Prerequisite checking result into the registry
    ?<12-27-2014 23:47:48> INFO: Connecting to SecondarySite2.microsoft.com registry
    ?<12-27-2014 23:47:50> INFO: Setting registry values
    ConfigMgrPrereq.log-End
    Well my question is what would be the best solutions as it bugs me for days now.
    Regards,

    Hello,
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;   
    SQL Server sysadmin rights;    Error;   
    Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions.
    Setup cannot continue.
    Did you install SQL server with a local account?
    ?<12-27-2014 23:41:27> SecondarySite2.microsoft.com;   
    Parent/child database collation;    Error;   
    The collation of the site database does not match the collation of the parent site's database. 
    All sites in a hierarchy must use the same database collation.
    Try this blog:
    http://jthys.wordpress.com/2012/04/02/sccm-2012-required-sql-server-collation/
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • SCCM Console on Secondary Site 2012 R2

    Hi all,
    I just want to ask whether it is supported or not when install SCCM Console on Secondary Site Server in 2012 R2? I've searched over internet but does not find a conclusion about that.
    From technet SCCM Console requirement and interoperability, there is no information that restrict install console from Secondary Site Server, but this link say it is not supported:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/7c31b2d6-130c-46d6-b24d-108110cb0b61/install-sccm-admin-console-on-secondary-site-servers-failed-on-one-of-two-server?forum=configmgradminconsole
    Has anyone try this, because today i installed console from one of my secondary site server and successfully connected with the primary site. Hope that does not break anything because with the ability of RBAC in 2012 R2, i can assign the admin at branch
    site permission he need to manage the clients in this secondary site.
    Thanks,

    I've seen it working with multiple customer. Also, I can imagine that it wouldn't be a supported scenario, purely because it's not tested (both new installations as upgrades).
    As, I'm not working for Microsoft and it's not documented, I can't give you any official statements.  
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • SCCM 2012 hierarchy CAS is down will primary sites work

    hi all
    SCCM 2012 hierarchy CAS is down will primary sites work and if primary site down will secondary sites work
    can anyone explain this, how CAS Down will affect the functionality of other primary sites or we can still manage the clients with primary site without any problem.

    Hi,
    if your CAS is down, you can still work with your primary site. You will get into replication trouble and even loose data after an offline time longer than 14 days. If you know that your offline time will be shorter than those 14 days, you will not get into
    trouble. This 14 day duration needs to be configured, I think the default value was 5 days.
    if you have a secondary sites and loose the connection to the primary, you are not able to manage the secondary sites since the SCCM console is only connectable to primary sites and CAS. The MP on your secondary will still collect client data which will
    be transmitted to the primary after an reconnect.
    Regards
    Thomas

  • How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?

    How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
    I have Direct Access implemented in my environment. I have Windows 8.1 machine connecting through direct access.
    I want to manage the windows 8.1 through SCCM. How do I setup IPV6 boundary. Can someone guide me through?
    Below are the Windows 8.1 client IP Configuration
    C:\Windows\system32>ipconfig
    Windows IP Configuration
    Wireless LAN adapter Local Area Connection* 3:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Wireless LAN adapter Wi-Fi:
       Connection-specific DNS Suffix  . : home
       Link-local IPv6 Address . . . . . : fe80::7466:11a5:39ed:ffb0%4
       IPv4 Address. . . . . . . . . . . : 192.168.1.5
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 192.168.1.1
    Tunnel adapter isatap.home:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . : home
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:1494:1339:93d6:439c
       Link-local IPv6 Address . . . . . : fe80::1494:1339:93d6:439c%9
       Default Gateway . . . . . . . . . :
    Tunnel adapter iphttpsinterface:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819
       Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:206c:f857:ddbe:2f2b
       Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10
       Default Gateway . . . . . . . . . :
    Below are the IPConfiguration details for Direct Access server
    C:\Windows\system32>PsExec.exe \\MURA01 ipconfig
    PsExec v1.98 - Execute processes remotely
    Copyright (C) 2001-2010 Mark Russinovich
    Sysinternals - www.sysinternals.com
    Windows IP Configuration
    Ethernet adapter Ethernet:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:3333::1
       Link-local IPv6 Address . . . . . : fe80::b1ad:1c29:b4a:9125%15
       IPv4 Address. . . . . . . . . . . : 10.192.1.25
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.192.1.1
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter isatap.{3D6A5E86-D85A-46C8-B69B-FFCF6D5D849C}:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1:0:5efe:10.192.1.25
       Link-local IPv6 Address . . . . . : fe80::5efe:10.192.1.25%18
       Default Gateway . . . . . . . . . :
    Tunnel adapter 6TO4 Adapter:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter IPHTTPSInterface:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::1
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::2
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:2552:e9f8:87d3:ed8e
       Link-local IPv6 Address . . . . . : fe80::2552:e9f8:87d3:ed8e%20
       Default Gateway . . . . . . . . . :
    ipconfig exited on MURA01 with error code 0.
    Below are the IPCONFIG Details for SCCM Server:
    C:\Windows\system32>PsExec.exe \\sccm01 ipconfig
    PsExec v1.98 - Execute processes remotely
    Copyright (C) 2001-2010 Mark Russinovich
    Sysinternals - www.sysinternals.com
    Windows IP Configuration
    Ethernet adapter Ethernet:
       Connection-specific DNS Suffix  . :
       Link-local IPv6 Address . . . . . : fe80::9f0:86f9:441d:bc07%12
       IPv4 Address. . . . . . . . . . . : 10.192.1.30
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.192.1.1
    Tunnel adapter isatap.{0749E47D-AE0A-4D47-9D37-BDDC848E56F6}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    ipconfig exited on sccm01 with error code 0.
    What will be the IPV6 values to configure boundary?

    Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Uninstalling Secondary Site Server through SW Delivery fails

    We have migrated to SCCM2012
    and now need to uninstall our
    SCCM 2007 Secondary Siteserver.
    Since we have 300 Secondary Site Server
    in the Hirarchy, the uninstall
    of the software must be distributed.
    We have to create a task sequence,
    in which the following steps are
    performed:
    Put the server in the SCOM
    Maintenance Mode
    Stop SCCM services SMS_SITE_COMPONENT_MANAGER
    and SMS_EXECUTIVE
    Uninstalling the Secondary Siteserver with the
    Command "{install path} \setup.exe /deinstall"
    Cleanup of folders and files that are left
    Restarting the Server
    Take server out of the SCOM
    Maintenance Mode
    The uninstallation works well on all Windows Server 2008 R2 Server. But not on the Windows Server 2003. There we get errors "Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS"
    and "MP name must be set in an environment variable" and "Fatal error is returned in execution of the action (Uninstall Secondary Site). The system cannot find the file specified. (Error: 80070002; Source: Windows)".
    After this errors, the Task Sequence Deployment aborts.
    Has anybody a solution for this situation?
    Here is the SMSTS.Log
    !--------------------------------------------------------------------------------------------! TSManager 26.02.2014 05:16:02 4392 (0x1128)
    Successfully completed the action (Set TS Variable SSS_Uninstall to True) with the exit win32 code 0 TSManager 26.02.2014 05:16:02 4392 (0x1128)
    Set authenticator in transport TSManager 26.02.2014 05:16:02 4392 (0x1128)
    Set a global environment variable _SMSTSLastActionRetCode=0 TSManager 26.02.2014 05:16:02 4392 (0x1128)
    Set a global environment variable _SMSTSLastActionSucceeded=true TSManager 26.02.2014 05:16:02 4392 (0x1128)
    Clear local default environment TSManager 26.02.2014 05:16:02 4392 (0x1128)
    Updated security on object K:\_SMSTaskSequence. TSManager 26.02.2014 05:16:02 4392 (0x1128)
    Set a global environment variable _SMSTSNextInstructionPointer=25 TSManager 26.02.2014 05:16:02 4392 (0x1128)
    Set a TS execution environment variable _SMSTSNextInstructionPointer=25 TSManager 26.02.2014 05:16:02 4392 (0x1128)
    Set a global environment variable _SMSTSInstructionStackString=0 18 19 22 TSManager 26.02.2014 05:16:02 4392 (0x1128)
    Set a TS execution environment variable _SMSTSInstructionStackString=0 18 19 22 TSManager 26.02.2014 05:16:02 4392 (0x1128)
    Save the current environment block TSManager 26.02.2014 05:16:02 4392 (0x1128)
    Start executing an instruction. Instruction name: Uninstall Secondary Site. Instruction pointer: 25 TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Set a global environment variable _SMSTSCurrentActionName=Uninstall Secondary Site TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Set a global environment variable _SMSTSNextInstructionPointer=25 TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Set a local default variable SMSTSDisableWow64Redirection TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Set a local default variable _SMSTSRunCommandLineAsUser TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Set a global environment variable _SMSTSLogPath=C:\WINDOWS\CCM\Logs\SMSTSLog TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Evaluating an AND expression TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Evaluating a file condition expression TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Expand a string: E:\Program Files\Microsoft Configuration Manager\bin\i386\smsexec.exe TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Expand a string:  TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Expand a string:  TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Expand a string:  TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Expand a string:  TSManager 26.02.2014 05:16:03 4392 (0x1128)
    The condition for the action (Uninstall Secondary Site) is evaluated to be true TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Expand a string: smsswd.exe /run: "E:\Program Files\Microsoft Configuration Manager\bin\i386\setup.exe" /deinstall TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Expand a string:  TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Start executing the command line: smsswd.exe /run: "E:\Program Files\Microsoft Configuration Manager\bin\i386\setup.exe" /deinstall TSManager 26.02.2014 05:16:03 4392 (0x1128)
    !--------------------------------------------------------------------------------------------! TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Expand a string: WinPEandFullOS TSManager 26.02.2014 05:16:03 4392 (0x1128)
    Executing command line: smsswd.exe /run: "E:\Program Files\Microsoft Configuration Manager\bin\i386\setup.exe" /deinstall TSManager 26.02.2014 05:16:03 4392 (0x1128)
    [ smsswd.exe ] InstallSoftware 26.02.2014 05:16:03 11464 (0x2CC8)
    PackageID = '' InstallSoftware 26.02.2014 05:16:03 11464 (0x2CC8)
    BaseVar = '', ContinueOnError='' InstallSoftware 26.02.2014 05:16:03 11464 (0x2CC8)
    ProgramName = '"E:\Program Files\Microsoft Configuration Manager\bin\i386\setup.exe" /deinstall' InstallSoftware 26.02.2014 05:16:03 11464 (0x2CC8)
    SwdAction = '0001' InstallSoftware 26.02.2014 05:16:03 11464 (0x2CC8)
    Working dir 'not set' InstallSoftware 26.02.2014 05:16:03 11464 (0x2CC8)
    Executing command line: Run command line InstallSoftware 26.02.2014 05:16:03 11464 (0x2CC8)
    Process completed with exit code 0 InstallSoftware 26.02.2014 05:31:19 11464 (0x2CC8)
    Command line returned 0 InstallSoftware 26.02.2014 05:31:19 11464 (0x2CC8)
    Process completed with exit code 0 TSManager 26.02.2014 05:31:19 4392 (0x1128)
    !--------------------------------------------------------------------------------------------! TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Successfully completed the action (Uninstall Secondary Site) with the exit win32 code 0 TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
    05:31:19 4392 (0x1128)
    Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
    05:31:19 4392 (0x1128)
    MP name must be set in an environment variable TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Non fatal error 0x80004005 in sending task sequence execution status message to MP TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Set a global environment variable _SMSTSLastActionRetCode=0 TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
    05:31:19 4392 (0x1128)
    Failed to set a global environment variable _SMSTSLastActionRetCode=0.
    The system cannot find the file specified. (Error: 80070002; Source: Windows) TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Clear local default environment TSManager 26.02.2014 05:31:19 4392 (0x1128)
    TS::Execution::CCommandLineInstruction::Execute() failed with the error code 80070002 TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Fatal error is returned in execution of the action (Uninstall Secondary Site).
    The system cannot find the file specified. (Error: 80070002; Source: Windows) TSManager 26.02.2014 05:31:19 4392 (0x1128)
    An error (0x80070002) is encountered in execution of the task sequence TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
    05:31:19 4392 (0x1128)
    Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
    05:31:19 4392 (0x1128)
    MP name must be set in an environment variable TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Non fatal error 0x80004005 in sending task sequence execution status message to MP TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
    05:31:19 4392 (0x1128)
    Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
    05:31:19 4392 (0x1128)
    Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
    05:31:19 4392 (0x1128)
    Task Sequence Engine failed! Code: 80070002 TSManager 26.02.2014 05:31:19 4392 (0x1128)
    **************************************************************************** TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Task sequence execution failed with error code 80070002 TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Cleaning Up. TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Removing Authenticator TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
    05:31:19 4392 (0x1128)
    Successfully unregistered Task Sequencing Environment COM Interface. TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Executing command line: "C:\WINDOWS\CCM\TsProgressUI.exe" /Unregister TSManager 26.02.2014 05:31:19 4392 (0x1128)
    ==========[ TsProgressUI started in process 12220 ]========== TsProgressUI 26.02.2014 05:31:19 7740 (0x1E3C)
    Unregistering COM classes TsProgressUI 26.02.2014 05:31:19 7740 (0x1E3C)
    Shutdown complete. TsProgressUI 26.02.2014 05:31:19 7740 (0x1E3C)
    Process completed with exit code 0 TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Successfully unregistered TS Progress UI. TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
    05:31:19 4392 (0x1128)
    Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
    05:31:19 4392 (0x1128)
    Getting active request access handle TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Error opening HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\Task Sequence. code 80070002 TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Error - could not get package and program IDs. code 80070002 TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Failed to open the task sequence key HKLM\Software\Microsoft\SMS\Task Sequence. Error code 0x80070002 TSManager 26.02.2014 05:31:19 4392 (0x1128)
    Start to cleanup TS policy TSManager 26.02.2014 05:31:19 4392 (0x1128)
    End TS policy cleanup TSManager 26.02.2014 05:31:20 4392 (0x1128)
    RegOpenKeyExW failed for Software\Microsoft\SMS\Task Sequence TSManager 26.02.2014 05:31:20 4392 (0x1128)
    GetTsRegValue() failed. 0x80070002. TSManager 26.02.2014 05:31:20 4392 (0x1128)
    End program:  TSManager 26.02.2014 05:31:20 4392 (0x1128)
    Error executing Task Sequence Manager service. Code 0x80070002 TSManager 26.02.2014 05:31:20 4392 (0x1128)
    Sending error status message TSManager 26.02.2014 05:31:20 4392 (0x1128)
    Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
    05:31:20 4392 (0x1128)
    Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
    05:31:20 4392 (0x1128)
    MP name must be set in an environment variable TSManager 26.02.2014 05:31:20 4392 (0x1128)
    Non fatal error 0x80004005 in sending task sequence execution status message to MP TSManager 26.02.2014 05:31:20 4392 (0x1128)
    Successfully finalized logs to SMS client log directory from C:\WINDOWS\CCM\Logs TSManager 26.02.2014 05:31:20 4392 (0x1128)
    Kind regards Stefan Somogyi

    Hi,
    When removing a secondary site using the Delete Secondary Site Wizard, you must choose whether to delete or uninstall the secondary
    site:
    Deleting the site will delete all information about the site and its resources from the Configuration Manager site database at its
    parent site, but it will leave the Configuration Manager secondary site installed on the secondary site computer. Select this option if you have already manually uninstalled the secondary site using Configuration Manager Setup at the secondary site computer.
    When Configuration Manager 2007 sites are deleted, the deleted site information is only deleted from the deleted site's direct parent site. Site deletion
    information is not propagated up the hierarchy to grandparent sites. In order to delete the site from the site database at sites above the deleted site's direct parent site, the hierarchy maintenance tool (Preinst.exe) must be run on every primary site above
    the deleted site's parent primary site using the command Preinst /delsite. For more information about the hierarchy maintenance tool, see
    Hierarchy Maintenance Tool (Preinst.exe).
    Refer to:
    How to Remove a Secondary Site Using the Configuration Manager Console
    Thanks, Prabha G

  • Installation of SCCM 2012 R2 and SQL Server 2014 error

    Hello All,
    I am attempting to setup SQL Server 2014 and SCCM 2012 R2 but I keep running into an error stating that "Configuration Manager requires Microsoft SQL Server
    2008 SP2 w/ CU9........ all the way up to Microsoft SQL Server 2012 with CU2 or higher." I am using all evaluation versions for this configuration as we are looking to test and evaluate the products. I was trying it with SQL 2014 because I was running
    into the same error with SQL 2012 and according to "http://blogs.technet.com/b/configmgrteam/archive/2015/03/30/updated-sc2012-configmgr-sp1-and-sc2012r2-configmgr-support-sql-server-2014.aspx" SQL
    2014 is supported with SCCM 2012 R2. SQL is installed locally on the same box. 
    Any suggestions would be appreciated.
    Thanks,
    Tucker
    Update: When running the Pre-Req check these are some of the failed returns.....
    SQL Server Edition: Failed: Configuration Manager primary site and central administration site don't support SQL Server Express Edition
    Not sure why it is recognizing SQL Express as this is a new machine.
    SQL Server service running account: Failed: The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service name> or LOCAL SERVICE.  You must configure
    the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
    For the SQL Service I am using a domain account created specifically for this.

    This has nothing to do with moving or restoring. The kb article says "This hotfix provides updated versions of the setup files and enables new installations
    of the System Center 2012 R2 Configuration Manager site database role and the System Center 2012 Configuration Manager SP1 site database role in Microsoft SQL Server 2014"
    Torsten Meringer | http://www.mssccmfaq.de

  • Disk Layout of a secondary site server

    I see the disk layout of a CAS and primary with an on-box SQL instance, raid 10, separate mdf and ldf files. What are you guys doing with your secondary install? Are you installing all of the SQL files onto a single drive separate from the OS or are you
    splitting our the mdf and ldf like you would for a full SQL instance. Let's say the secondary will support the maximum number of clients, so the load will be heavy.

    Even a heavy load on a fully loaded secondary is nothing compared to what a primary site is expected to handle. The SQL data on a secondary is a very small subset of the overall site's DB and if effectively read-only (from the client's perspective at least).
    I honestly wouldn't/don't worry about it all if you have current server class-hardware.
    Jason | http://blog.configmgrftw.com

  • SCEP definitions do not update on Secondary site server

    Issue:  Win 2008R2 server - Secondary site server - SCEP is installed, but it cannot find/download/install any virus definitions.  When attempting to hit "update" within the SCEP console, it returns no results.  When attempting to
    check online for Win Updates via control panel, no virus def updates are found (but 11 different updates are found for .NET and other things).
    The error that is thrown in the Windows Updates log when attempting to update through the SCEP console is Error: 0x80248014. http://support.microsoft.com/kb/2832355/en-us  Although this
    applies to Windows 8, I still checked the settings per the article.  My settings check out okay.
    No error is thrown when attempting to check for updates via Windows Update in the control panel.  It finds 11 available updates (none of which are SCEP related), and displays them properly.
    This server has the CCM2012 client installed, and the Anti-Malware policy has been successfully applied.  We have a separate Anti-Malware policy that is applied only to our SCCM site servers.  The policy indicates that all virus defs are to be
    obtained from Microsoft online Update.  Our primary site server does not display this problem.  It is updating automatically with no issues.
    It is possible to manually download and apply the latest virus definitions by visiting the MS virus defs site and running the manual update installer.  I have only done this to ensure that the virus defs are somewhat current.
    Steps taken:  I have removed SCEP and re-installed it.  I have also attempted the Windows Update "Fix-it" found here.
    http://support.microsoft.com/kb/971058
    Error 0x80248014 persists when attempting an update through the SCEP console, and no SCEP related updates are found by Microsoft online Update.
    Any suggestions on what I might try next?

    Thank you for the reply.
    Well, the issue with this secondary site server isn't 100% fixed, but your line of questions pushed me in a direction that allowed me to put a Band-Aid on it.  That said, it is updating the virus defs - although not exactly as it should be.  But,
    this is good enough for me now.
    To answer some of your questions that seem relevant.  This is a fairly new SCCM setup. Our implementation of SCCM currently is not configured to handle any Software Updates yet.  We still rely on a separate WSUS server in our environment for all
    WinUpdates (including SCEP/FEP).  With that in mind, the Anti-Malware policy that is applied to both SCCM servers use the following 2 locations in order for obtaining SCEP updates:
    1) MS online Updates  2)WSUS
    As mentioned previously, the secondary site never detected updates via SCEP console or WinUpdates via Control Panel.  But this did not explain why it could not retrieve from WSUS.
    A quick look at our WSUS setup shows that auto-approval is configured for all of our workstations, but not our servers.  I corrected this within WSUS - Forced GPUpdate on the site server - ran wuauclt /detectnow on the site server - Now, the virus defs
    were found and could be installed.  (I'll have to wait a little while to see if it continues to update automatically as it should)
    So, as I mentioned above - the big problem of not updating at all is corrected, however the issue still remains "why are no updates found from MS Updates online?"
    At this point - I don't know, but as long as it updates in some fashion, I'm good with that.

  • WSUS 6 upstream server will support WSUS 3 SP2 downstream server or not

    In our company WSUS upstream server operating system is windows 2012 r2. I would like to know can we install downstream server in windows 2008 r2 (WSUS 3.0 sp2) it will download approved patches from upstream server.
    WSUS 6 upstream server will support WSUS 3.0 SP2 downstream or not? 

    No post-installation instruction in the KB article.
    Then you should READ the article again. Let me help:
    How to apply this update
    We recommend that you synchronize all WSUS servers after you apply this update. If you have a hierarchy of WSUS servers, apply this update, and then synchronize your servers from the top of the hierarchy on down. To synchronize your servers in this manner,
    follow these steps:
    Note Before computers that are running Windows 8 or Windows Server 2012 can be updated by WSUS 3.2 servers, you must complete these steps.
    Start the process with WSUS 3.0 SP2 that synchronizes with Microsoft Update.
    Apply this update.
    Start a synchronization.
    Wait for the synchronization to succeed.
    Repeat steps 2 through 4 for each WSUS 3.0 SP2 server that synchronizes to the server that you just updated.
    Known issues with this update
    If you have Windows 8 or Windows Server 2012 clients that synchronized with WSUS 3SP2 before you applied this update, wait for the update to be applied to the WSUS servers, and then follow these steps:
    On the affected client, open cmd.exe in elevated mode
    Type the following commands. Make sure that you press Enter after you type each command:
    Net stop wuauserv
    rd /s %windir%\softwaredistribution\
    Net start wuauserv
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Maybe you are looking for

  • Not able to get the data in custom search help.

    Hi , sorry was not aware of how to post a new thread. I am working on web UI and i need help asap. I want f4 help whose value depends on the other fields drop down.somhow i managed to get the values in local table and passed it to static attribute of

  • Calendar suggest for recurring items

    Say you have a standing meeting every Tuesday and Thursday at 8AM. You enter all the detail on Tuesday, and then set it as a repeat, daily. Great for Tuesday. But what about Thursday. You have to reenter all the details all over again. Isn't the idea

  • Maxtor One Touch II Won't Mount

    I'm running 10.6.8 and my maxtor one touch II won't mount all of a sudden? I've tried fire wire 400 and fire 400to800, restarting etc. The drive won't show up? The driver update on the Maxtor/Seagate site opens up as code in a text edit file, it does

  • Is there a browser in Acrobat App?

    is there a Browser incorporated in Acrobat App? say if you want to open a pdf fillable form online, can you open it directly in through the App rather than going through the Safari etc? such browsers are there in other Apps like Documents etc. I wish

  • Imovie update

    i want to get the latest i movie on my imac. but i am having some trouble. i have the latest imovie on my mackbook pro and now i want it on my imac because it is easier to use. when i go to my app store and try to download imovie it tells me that i n