SCCM 2012 R2 -The current site status: ReplicationMaintenance.

Good day,
Hope all is well.
We currently have a CAS Server, after we upgraded to 2012 R2 replication does not work anymore.
Can anyone assist me please.
I get the following errors, also tried multiple fixes.
Checking if initialization request is needed for replication group Hardware_Inventory_23 from site DTS. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:51:47.029-120><thread=6788 (0x1A84)>
AND
The current site status: ReplicationMaintenance. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:50:32.483-120><thread=8320 (0x2080)>
AND
Error: Failed to create drs init stored proc $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:50:38.381-120><thread=6788 (0x1A84)>
Error: Exception message: [Cannot drop type 'SCCM_DRS_TIME_ZONE_DATA_TYPETEMP' because it is being referenced by object 'spUpsertTIME_ZONE_DATA'. There may be other objects that reference this type.] $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014
07:50:38.381-120><thread=6788 (0x1A84)>
Error: Could not create Drs initialization stored procedures or functions for table TIME_ZONE_DATA, will retry on next cycle. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><04-10-2014 07:50:38.382-120><thread=6788 (0x1A84)>
Hope to hear from you soon,
Thank you

These are the errors:
3/18/2014 4:19:31 PM: ReplicationLinkAnalysis Information: 1 : Current Rule: CheckFailedLinks has 1 dependent rule(s)
3/18/2014 4:19:31 PM: ReplicationLinkAnalysis Information: 1 : Retrieving Rule object(s): CheckFailedLinks from rule object collection.
3/18/2014 4:19:31 PM: ReplicationLinkAnalysis Information: 1 : Current Rule: CheckFailedLinks has only one dependent. Adding Dependency Rule: CheckFailedLinks DependsOn Rule: IsSiteActive
3/18/2014 4:19:31 PM: ReplicationLinkAnalysis Information: 1 : Current Rule: CheckFailedLinks has only one dependent. Adding Dependency Rule: CheckFailedLinks DependsOn Rule: IsSiteActive
3/18/2014 4:19:36 PM: ReplicationLinkAnalysis Information: 1 : Rule DoesBrokerConfigurationExist result: failed.
3/18/2014 4:19:36 PM: ReplicationLinkAnalysis Information: 1 : Rule: DoesBrokerConfigurationExist failed. Stopped running replication link analysis rules.
3/18/2014 4:20:05 PM: ReplicationLinkAnalysis Information: 1 : User selected to re-check failed rule: DoesBrokerConfigurationExist , removing this rule from failed rules list
3/18/2014 4:20:05 PM: ReplicationLinkAnalysis Information: 1 : failedRulesList count= 0
3/18/2014 4:20:09 PM: ReplicationLinkAnalysis Information: 1 : Rule DoesBrokerConfigurationExist result: failed.
3/18/2014 4:20:09 PM: ReplicationLinkAnalysis Information: 1 : Rule: DoesBrokerConfigurationExist failed. Stopped running replication link analysis rules.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Running rule: IsSysCommitTabError.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Running rule: <IsSysCommitTabError SqlInstanceName="sccmcas01" ></IsSysCommitTabError>
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : The last time sys.syscommittab error was checked at 03/18/2014 15:55:00.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : SQL's error log file for SQL instance sccmcas01.stb.sun.ac.za is E:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Scanning SQL error log files for the string [Error: 2601,].
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file \\sccmcas01\E$\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Reading content of file \\sccmcas01\E$\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file \\sccmcas01\E$\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.1.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
\\sccmcas01\E$\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.1.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Done checking the file
\\sccmcas01\E$\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.1 since all other lines in the file are earlier than last check date and time.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Getting results of rule: IsSysCommitTabError execution
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Loading result Xml from rule:IsSysCommitTabError
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : rule:IsSysCommitTabError does not have any dependent rules
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Rule IsSysCommitTabError result: passed.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Rule: IsSysCommitTabError executed SUCCESSFULLY. Adding it to success list.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Running rule: IsSysCommitTabError.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Running rule: <IsSysCommitTabError SqlInstanceName="stbsql02" ></IsSysCommitTabError>
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : The last time sys.syscommittab error was checked at 03/18/2014 15:55:00.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Reading registry key SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL\inst02 on stbsql02
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : SQL's error log file for SQL instance stbsql02\inst02 is I:\MSSQL11.INST02\MSSQL\Log\ERRORLOG.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Scanning SQL error log files for the string [Error: 2601,].
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
\\stbsql02\I$\MSSQL11.INST02\MSSQL\Log\ERRORLOG.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
\\stbsql02\I$\MSSQL11.INST02\MSSQL\Log\ERRORLOG.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Verbose: 1 : Done checking the file
\\stbsql02\I$\MSSQL11.INST02\MSSQL\Log\ERRORLOG since all other lines in the file are earlier than last check date and time.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Getting results of rule: IsSysCommitTabError execution
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Loading result Xml from rule:IsSysCommitTabError
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : rule:IsSysCommitTabError does not have any dependent rules
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Rule IsSysCommitTabError result: passed.
3/18/2014 4:20:15 PM: ReplicationLinkAnalysis Information: 1 : Rule: IsSysCommitTabError executed SUCCESSFULLY. Adding it to success list.
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : dependent rule: IsSiteActive for parent rule: CheckDegradedLinks , failed in previous run(s)
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : So marking current rule: CheckDegradedLinks as failed
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : Dependent Rule: IsSiteActive failed for parent rule: CheckDegradedLinks. Continue running other replication link analysis rules.
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : dependent rule: IsSiteActive for parent rule: CheckDegradedLinks , failed in previous run(s)
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : So marking current rule: CheckDegradedLinks as failed
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : Dependent Rule: IsSiteActive failed for parent rule: CheckDegradedLinks. Continue running other replication link analysis rules.
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : dependent rule: IsSiteActive for parent rule: CheckFailedLinks , failed in previous run(s)
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : So marking current rule: CheckFailedLinks as failed
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : Dependent Rule: IsSiteActive failed for parent rule: CheckFailedLinks. Continue running other replication link analysis rules.
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : dependent rule: IsSiteActive for parent rule: CheckFailedLinks , failed in previous run(s)
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : So marking current rule: CheckFailedLinks as failed
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : Dependent Rule: IsSiteActive failed for parent rule: CheckFailedLinks. Continue running other replication link analysis rules.
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : dependent rule: IsSiteActive for parent rule: IsQueueDisabled , failed in previous run(s)
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : So marking current rule: IsQueueDisabled as failed
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : Dependent Rule: IsSiteActive failed for parent rule: IsQueueDisabled. Continue running other replication link analysis rules.
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : dependent rule: IsSiteActive for parent rule: IsQueueDisabled , failed in previous run(s)
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : So marking current rule: IsQueueDisabled as failed
4/10/2014 8:30:54 AM: ReplicationLinkAnalysis Information: 1 : Dependent Rule: IsSiteActive failed for parent rule: IsQueueDisabled. Continue running other replication link analysis rules.
4/10/2014 8:30:55 AM: ReplicationLinkAnalysis Information: 1 : dependent rule: IsSiteActive for parent rule: IsLinkedServerConnectionWorking , failed in previous run(s)
4/10/2014 8:30:55 AM: ReplicationLinkAnalysis Information: 1 : So marking current rule: IsLinkedServerConnectionWorking as failed
4/10/2014 8:30:55 AM: ReplicationLinkAnalysis Information: 1 : Dependent Rule: IsSiteActive failed for parent rule: IsLinkedServerConnectionWorking. Continue running other replication link analysis rules.

Similar Messages

BSP: Use of dynpro services is not possible in the current system status

Hello,
in the component SRQM_INCIDENT_H i created a own button and eventhandler on the overview view.
Here in this eventhandler i´m calling an own method from an own class. This method is doing a RFC in our ERP system.
If i test the method this works fine.
If i call this method in my eventhandler i get BSP error:
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Error Name
Program ZCL_CRM_CS_DATA_SERVICES======CP
Include ZCL_CRM_CS_DATA_SERVICES======CM001
ABAP Class ZCL_CRM_CS_DATA_SERVICES
Method CREATE_CS_ORDER
Line 54
Long text -
Error type: Exception
Any ideas?
thank you
Best regards

Hi,
Web-UI cannot handle MESSAGE statements. if it's your own program, you should use the web-ui( view_manager->get_message_container or cl_crm_bol_core's global message container) alternatives to display the messages. If the message statement is being issued by a standard program, it's most usually deliberate attempt to fail on unrecoverable error. You can catch it by usin the try...catch CX_SY_MESSAGE_IN_PLUGIN_MODE ..where you call the standard functions.
Regards,
Arun Prakash

CRM70 Use of dynpro services is not possible in the current system status

Hi all,
i programmed in Webclient UI an own button which calls a Method of a zclass. Within this method i do a remote function call in ERP.
I can test the method successfully but if i call it from CRM Webclient UI i have a BSP error:
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Could one of you experts please give me a hind?
Thank you
Kind regards
Manfred

Solved,
there was a SAP GUI "MESSAGE" in the ERP function call which is not possible for CRM Webclient UI.
Kind regards
Manfred

Use of dynpro services is not possible in the current system status

Hi,
I am new to all of this and new to SAP. I will bew self learing my way into CRM SOA, working with the web service creaiton i keep getting the following errlr when rtying to Activate a new created web service:
"Use of dynpro services is not possible in the current system status"
not knowing the system that well i wonderin if there is missing configuration. This is CRM 7.0
Exception Class CX_SY_SEND_DYNPRO_NO_RECEIVER
Error Name DYNPRO_SEND_IN_BACKGROUND
Program SAPLSKEY
Include LSKEYU03
Line 33

Hi Keith,
Welcome to the SCN forums!
SAPLSKEY
You should first check your Abap dumps using tranaction code ST22, this usually provides more detail on the problem.
In this case I think it's trying to return a screen (or pop-up message) that can't be handled while activating the web service. The "SAPLSKEY" tells me that it might be licence related, do you have a valid developer's licence for Abap development work? If not apply for one (find out the procedure from other Abap developer's that you may work with) & check if that makes a difference while activating.
Regards, Trevor

Infopath submit - how to hide - Save as dialog box - You can only save this file to the current site

HI,
I have a infopath form. In the submit options, i have used the below:
submit options -
sharepoint document library
Data connection - Sharepoint Library Submit
Doc library - lib location
File name: concat("User Info - ", ResourceName, "-", PersonalID)
Allow overwrite if file exists is checked.
When I try to save a record, I am getting a popup:
Save As:
You can only save this file to the current site
File Name: textbox
save location: doc lib.
save, cancel buttons.
How to override this save as option(save as option should not be shown to user), and save the file using the file name mentioned?
Thanks

Are you clicking "Save" when you're using the form or "Submit"??
You should be using "Submit" and it will ... submit your form to the document library with the file name you specified.
To disable the "Save" button, click on "File" then "Form Options". Under the "Filler Features" area you can uncheck the box beside "Save and Save As". Click OK then re-publish your form.

I used to have a close tab for exiting the current site I was on instead of closing all of firefox. How do I get it back?

I used to have a close tab for exiting the current site I was on instead of closing all of firefox. It was a red box with an x in it. How do I get it back?

Click in a blank space on a toolbar & open 'customize'. You'll find that there is a gray "x" (on my browser it's gray) that is for closing a tab. Drag it up to wherever you want on the toolbar & it should work fine.

When the page opens it fills the whole screen and I cannot access anything else unless I go out of the current site. I cannot minimize it.

When I open a site, it fills the whole page and I cannot minimize it or get to another page simultaneously. The only option I currently have is to put the cursor in the upper left corner and only the tab for the current site is shown.

On Mac use Fn + F11 to toggle full screen mode
*https://support.mozilla.org/kb/how-to-use-full-screen
You can try to remove the Firefox plist file (org.mozilla.firefox.plist).
*http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results
Go to "~/Library/Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist)

Getting the Advanced Search (SP2013) to only search from the Current Site downwards

Hi
I know the Advanced Search webpart has not been updated for years (It still has scopes in the "Modify Web Part" !)
But.....
Can I get the SP2013 version to search from the current site downwards rather than starting at the top level site every time ?
Thanks
Nigel
Nigel Price NJPEnterprises

You need to set up a new result source and change the query transform to something like this:
{searchTerms} AND Path:"http://basesmc15/teamonesubone"
Then navigate to the results.aspx that the advanced search sends it's query to. Here edit the page and edit the Search Results web part. Click on "Change Query". Select the new result source you just created from the drop down. All the queries
will now use this result source which is limited to that subsite. Make sure to uncheck the "Show the Result Type Picker" option on the advanced search web part.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

Help with running iWeb on multiple computers and find the current site

I have two Macs and MobileMe. I have usually run iWeb on the laptop and have my website on it. I thought I saved the site in MobileMe. When I go to the desktop and open iWeb it opens up an old version of my site. I search for Domain and none of the options are the current site. On my laptop (the current iWeb version) I opened MobileMe's iDisk and tried a couple of the "Domains" that live on it and none of them are the current version. Now, I can't even get my laptop to open the one I had opened a few moments ago beacuse I can't find the newest domain. So, where is my current domain/ I can't find it.
I do have a folder on iDisk called "Sites" that contains the HTML files and folders of my current site but I can't seem to get this to open in iWeb. But, this folder does contain the current version but none of the Domain files I have opened refer to these I guess.
What should I do?
Guy
PS I am running the latest iWeb on both computers

Welcome to the Apple Discussions. As you know for both of you to edit and update the web site both of you must be using the same version of iWeb and working on the same Domain.sites2 file.
See MacWorld's online article Managing an iWeb site from multiple Macs. However, there are a couple of caveats: 1 - only one can be editing and uploading at a time; 2 - allow plenty of time for Dropbox to update all copies of the domain file.
What I would do is when you plan on editing the site copy the domain file that's in your Dropbox as a backup. Do you editing and publish. If something goes wrong you'll have the good domain file that was copied just before you started editing. If the site is small and, thus, the domain file the updating will be better insured. Keep both computers online much of the time so the updates will go thru as soon as they are made.
OT

The selected folder does not contain the current site's homepage

dreamweaver displays the following message when editting some
sites:
"WARNING: The selected folder does not contain the current
site's homepage. The site map cannot be built."
Then my remote info is cleared!
I know I'm obviously not doing something, but there is no
need to clear my remote info!!
edit: I've selected my home page, but this still doesn't
explain why Dreamweaver feels the need to erase my remote
info!!!

> Then my remote info is cleared!
Huh?
This only means that you have not told DW which page is your
home page.
Find it in the local file list, and use the right-click
context menu to so
designate the file.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ogre11" <[email protected]> wrote in
message
news:f2293h$7lg$[email protected]..
> dreamweaver displays the following message when editting
some sites:
>
> "WARNING: The selected folder does not contain the
current site's
> homepage.
> The site map cannot be built."
>
> Then my remote info is cleared!
>
> I know I'm obviously not doing something, but there is
no need to clear my
> remote info!!
>

Hi, problem occurs when I'm clicking a button or a new url on the current site. For instance, when i clicked that "Ask This" button on this web site, It redirects me to the default homepage. I cant go back and I'm losing the previous web site HELP PLEASE!

Hi, problem occurs when I'm clicking a button or a new url on the current site. For instance, when i clicked that "Ask This" button on this web site, It redirects me to the default homepage. I cant go back and I'm losing the previous web site HELP PLEASE!

Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Using a custom certificate store for SCCM 2012 clients and primary site server

I have read what seems to be all the pki related documentation out there for SCCM 2012. I have a PKI infrastructure up and running issueing certificates with an offline root through group policy autoenrollment. The problem that i'm faced with is we are migrating
from SCCM 2007 that was in native mode and we chose not to use the CA that we used for the old SCCM environment. When the clients attempt to communicate with the M.P. it runs through all of the different certificates and adds a tremendous amount of overhead
to the M.P. We will have ten's of thousands of clients by migration end. Could someone please point me to a document that goes over how to leverage a custom certificate store that I could then tell the new 2012 environment to use? I know that it's in there,
I've seen it in the console. The setup is one primary site server with SQL on box and the pki I just mentioned as well as the old 2007 environment that is still live.
I read that you can try and use SAN as a method of identifying the new certs but I haven't found a good document covering exactly how that works. Any info you could provide I would be very grateful for. Thanks.

Jason, thank you for your reply. I'm getting the impression that you have never been in the situation where you had to deal with 2 different PKI environments. Let me state that I understand what your saying about trust. We have to configure the trusted root
CA via GPO. That simply isn't enough, and I have a valid example to backup this claim. When the new clients got the advertisement and began the ccmsetup process I used the /pki switch among others. What the client end up doing was selecting a certificate that
had the longest validity period which was issued by our old CA. It checked the authentication chain, found it to be valid and selected it for communication. At that point the installation failed, period, no caveats as you say. The reason the install failed
because the new PKI infrastructure is integrated into the new environment, and the old is not. So when you said " that
are trusted and they can use *any* cert that is trusted because at the end of the day, there is no
difference between two valid certs that have the same purpose as long as they are trusted. "
that is not correct. Both certs are trusted, and use the same certificate template, but only one certificate would allow the install to complete successfully.
Once I started using the CCMCERTISSUERS
switch the client install went swimmingly. The only reason I'm still debating this point is because someone might read this thread see your comments and assume "well I've got my new PKI configured as a trusted root CA, I should be all set" and their
deployment will fail, just as my pilot did.
About Intune I'm looking forward to doing a POC in the lab i built with my Note 3. I'm hoping it goes well as I really want to have our MDM migrated into ConfigMgr... I think the
biggest obstacle outside of selling it to management will be the actual device migration from the current MDM solution. From what I understand of the enrollment process manual install and config is the only path forward.
Thanks Jason for your post and discussion.

[SCCM 2012 R2] Re-using site code

Hi All,
I have a situation where I need to uninstall SCCM Primary Site because of wrong server name convention. SCCM 2012 documentation do not mention of reusing site code after previous site uninstallation.
Is it possible to use same Site Code for new primary site after uninstall old one?
SCCM 2007 Documentation: Site codes should never be used more than once in a Configuration Manager 2007 hierarchy for active sites. If you have uninstalled a site that was publishing site data to Active Directory Domain Services in preparation for installing
a new Configuration Manager 2007 site with the same site code, you should ensure that the previous site's information has been removed from Active Directory Domain Services, and possibly WINS, before use the old site code for a new Configuration Manager 2007
site. All references to the original site need to be removed from all other sites in the hierarchy, and you need to clean up any objects previously replicated to potential child sites of the new site. If this is not done, any newly replicated objects from
the newly created site could overwrite objects already replicated to the child sites by the previous installation.
SCCM 2012 Documentation: Site codes cannot be used more than one time in a Configuration Manager hierarchy for a central administration site or primary sites. If you reuse a site code, you run the risk of having object ID conflicts in your Configuration
Manager hierarchy. You can reuse the site code for a secondary site if it is no longer in use in your Configuration Manager hierarchy or in the Active Directory forest.
Thank you in advance.
Regards,

I have a CAS (CAS) and One Primary site (AU1) connected to CAS.
I want to install second Primary site (EU1) connected to same CAS (CAS). Server name for EU1 Primary site is wrong and guys that are higher in hierarchy than me want from me to fix the server name.
Reason for everything is always: Politics
So you know that you are begging for trouble by having a CAS. You do also know that all the administration should be done ONLY on the CAS and nowhere else.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Sccm 2012 extent the active directory schema error

Hello
I am experiecing an issue when attempting to extend my AD Schema for SCCM 2012
<12-10-2014 20:04:33> Modifying Active Directory Schema - with SMS extensions.
<12-10-2014 20:04:33> DS Root:CN=Schema,CN=Configuration,DC=,DC=com
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Site-Code. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Assignment-Site-Code. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Site-Boundaries. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Roaming-Boundaries. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Default-MP. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Device-Management-Point. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-MP-Name. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-MP-Address. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Health-State. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Source-Forest. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Ranged-IP-Low. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Ranged-IP-High. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Version. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Capabilities. Error code = 8224.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Management-Point. Error code = 8202.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Server-Locator-Point. Error code = 8202.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Site. Error code = 8202.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Roaming-Boundary-Range. Error code = 8202.
<12-10-2014 20:04:33> Failed to extend the Active Directory schema, please find details in "C:\ExtADSch.log".
any one help me to fix this issue

Hi,
It is most likley due to a replication Issue in your AD, check the previous thread on the topic:https://social.technet.microsoft.com/Forums/systemcenter/en-US/1d377109-4fa9-4608-8a3a-cefd436e82ee/error-8224-when-extending-active-directory-schema
Make sure that all replication issues are solved and try again.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012 Moving the Database to Another Drive

Due to space constraints I need to move my SCCM 2012 R2 database to another drive on the same system(server). I will run preinst/stopsite command to stop all sccm services, but wanted to know if I could copy and move the DB and Log files to their
new drive location, instead of performing a SQL backup and restore? We are currently running SCCM 2012 R2 with SQL 2012 SP1 CU4 as our backend database.
Thanks,
-Bern

you may have already seen these posts... worth a quick look:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/3462715c-d1b7-4f1b-b5f2-1f35235e4179/move-sccm-database-to-another-drive?forum=configmgradminconsole
http://support.microsoft.com/kb/2709082
http://damatisystemcenter.com/2013/05/23/moving-sccm-2012-sp1-database-to-new-folder/

SCCM 2012 R2 -The current site status: ReplicationMaintenance.

Similar Messages

Maybe you are looking for