SCCM 2012 R2 UDI Tasksequence (MDT 2013): Capture and Refresh UserState in one Tasksequence

Hi,
is it possible to first capture the user state in an UDI Tasksequence to USB or Network drive and afterwards, after re-installation restore the user state via restore user state step?
Customer wants this steps in refresh Scenario:
UDI Tasksequence starts within Windows
User configures Network drive to capture User State
Windows is reinstalled during Tasksequence
User State is restored in restore user state step (same TS)
Possible?
I can't find reliable Information?
Thanks for answers!
Regards,
ckuever

Hi,
Here is video for your reference.
Configuring MDT 2012 UDI Replace Computer Scenario
http://technet.microsoft.com/en-us/video/configuring-mdt-2012-udi-replace-computer-scenario
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

KeyboardLocale and SystemLocale during UDI Wizard (MDT 2013)

Hi
We're using SCCM 2012 R2 integrated with MDT 2013
we deploy Windows 7 with Task Sequence process with UDI Wizard
we have 2 main problems regarding the Language Settings
1. in the wizard we define UserLocale, KeyboardLocale and UILanguage, OSDTimeZone
what about SystemLocale ? which is very basic to set, but there is no built-in combobox for it.
the only workaround I can come up with is to build a custom page with that setting but it is hard to create a combobox with all the available languages, even when editing the XML directly and not via the UI.
2. if I set the KeyboardLocale to Hebrew for example in the Wizard, the SMS environment variable is set to 0409:0000040d
this causes the deployment to end with Hebrew installed with US keyboard layout. which is wrong!
I expect the value to be 040d:0000040d (Hebrew keyboard with Hebrew layout)
which brings me to another question... how can I define multi keyboards? because my actual goal is to have English as my default keyboard language and to have Hebrew as a secondary keyboard.
it is not Hebrew in particular. we deploy Windows in 20 different sites worldwide and English should be always be the default language and we want to add another local additional language
I added a script that modifies the keyboardlocale and converts it from 0409:00000### to 0409:00000409;0###:00000###, but I feel like it is too much for this little setting that should be so basic...
any help will be appreciated. thanks
Tamir Levy

Hi,
Here is video for your reference.
Configuring MDT 2012 UDI Replace Computer Scenario
http://technet.microsoft.com/en-us/video/configuring-mdt-2012-udi-replace-computer-scenario
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

MDT 2013 Roles and features failing to install for server 2012 r2

I am having issues trying to apply Server 2012r2 Roles and features via MDT 2013.
Below I have attached the log.
<![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[The task sequencer log is located at C:\Users\ADMINI~1\AppData\Local\Temp\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole"
context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Roles will be installed.]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Roles specified in Role:]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ FileAndStorage-Services]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[RoleServices specified in RoleService:]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ File-Services]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Storage-Services]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Features specified in Feature:]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ NET-Framework-Features]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ NET-Framework-Core]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ NET-WCF-TCP-PortSharing45]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ InkAndHandwritingServices]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Server-Media-Foundation]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ RDC]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ SNMP-Service]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ SNMP-WMI-Provider]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Telnet-Client]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ User-Interfaces-Infra]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Server-Gui-Mgmt-Infra]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Desktop-Experience]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Server-Gui-Shell]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ PowerShellRoot]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ PowerShell]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ PowerShell-V2]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[No items were specified in variable OptionalOSRoles.]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[No items were specified in variable OptionalOSRoleServices.]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[No items were specified in variable OptionalOSFeatures.]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ZTI Heartbeat: Processing roles (0% complete]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Property Parameters is now = -FeatureName FileAndStorage-Services]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Validating connection to \\WIN-7VSNJRF3PNO\DeploymentShare$\Operating Systems\Windows Server 2012 R2 SERVERSTANDARDCORE x64]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context=""
type="1" thread="" file="ZTIOSRole">
<![LOG[Mapping server share: \\WIN-7VSNJRF3PNO\DeploymentShare$]LOG]!><time="10:45:24.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Already connected to server WIN-7VSNJRF3PNO as that is where this script is running from.]LOG]!><time="10:45:24.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread=""
file="ZTIOSRole">
<![LOG[Copying source files locally from \\WIN-7VSNJRF3PNO\DeploymentShare$\Operating Systems\Windows Server 2012 R2 SERVERSTANDARDCORE x64\sources\sxs]LOG]!><time="10:45:24.000+000" date="08-25-2014" component="ZTIOSRole"
context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ZTI ERROR - Unhandled error returned by ZTIOSRole: Path not found (76)]LOG]!><time="10:45:27.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="3" thread="" file="ZTIOSRole">

I have narrowed this issue down to .net 3.5 install.
I have boot, efi, sources, support, autorun, bootmgr, bootmgr.edi, and setup.
I have confirmed that the sxs folder is there.
I also just added WindowsSource=%DeployRoot%\Operating Systems\Windows Server 2012 R2 SERVERSTANDARDCORE x64\sources\sxs to my customsettings and updated the boot iso. I am still receiving the errors.
One last bit of information I am able to get to the deployment share with the sxs folder in it from the reference machine I am creating but when I manually try to install .net 3.5 from roles and features to the share it fails. But if I copy the files local
they work fine.
I seem to have permission issues with other subfolders also.
Thanks,
Anthony

Install SCCM Client Post Install via MDT 2013

I want to know best practice on how to install the SCCM client via MDT 2013 as a post install task sequence? Im deploying a lot of machines via MDT offline USB....
Is it grabbing the ccmsetup folder and using the following command line?
ccmsetup.exe /noservice /MP:<insert> SMSSITECODE=<insert> smscachesize=10000

There's no such thing as a "best practice" for most real-world tasks; real-world is different for everyone which means you need to know the details and choose the right things for your environment.
You need to run the command-line that is appropriate for your environment just like you would for any manual install.
Without knowing any details about your environment, I would add the SMSMP and FSP properties to the above command-line. If this is truly an offline install, you shouldn't use /mp though, you should use /source and point it at the client directory.
Jason | http://blog.configmgrftw.com | @jasonsandys

SSRS 2012 report integrated with SharePoint 2013 issue :Report refreshing after some idle time

we have SSRS 2012 report integrated with SharePoint 2013 , when we click on any toggle item after some idle time of 60 secs and try again to expand
another toggle item then complete report is getting refreshed and if we are in child report it is redirecting to parent report. . we didn’t set any refreshing property at report level. I hope there will be some idle time setting at sharepoint site
level.
what we observed.
1. there is no problem when we expand toggle items without any idle time.
2. when we open the report and expand few toggles and keep idle for 60 seconds and try
again to expand another toggle item then complete report is getting refreshed (all toggle items are collapsing).
3. If you keep idle for 60 minutes and if you didn’t do any action like expanding toggle
items it is not refreshing.
why it is happening and how to stop that complete refresh.
Surendra Thota

Hi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

SCCM 2012 Software Update Management for Windows Servers and how to automatic set SCOM maintenance mode?

Hi,
We planning to go one level higher to automat and have more dynamic Software Update Management for Windows Servers. We have SCCM 2012 R2, SCOM 2012 R2 and SCO 2012 R2.
Our plan is to pur server in an AD-Group to get Update Schedule, from the servers will be importet to an Collection for Automatic Update and reboot. If I understand Everything right SCOM can't read AD-Group and put then in an Schedule maintenance mode. SCOM
can read reg value as exempel.
IS there any smar way to make the SCOM Maintenance Mode Schedule dynamic?
I found this
http://www.scom2k7.com/scom-2012-maintenance-mode-scheduler/?
/SaiTech

You could use Orchestrator to put the servers from a specific collection, or AD group, in maintenance mode in SCOM. For an example see:
http://www.systemcentercentral.com/orchestrator-how-to-scom-maintenance-mode-for-windows-computers-in-an-sccm-collection/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012 R2 Computer reports not displaying users and domain information for some systems.

I have a recently deployed SCCM 2012 R2 server which has been running well so far.
I have, however, noticed in the reporting (example: "Computers in a specific site" report) that some computers are not showing information like "User domain" and "User Name" (for about 500 of the 1500 computers).
If I go to a collection, select such a computer and right click to properties and go to the general tab I can see that the below fields are blank:
Last Logon User Domain
Last Logon User Name
All other fields are populated similarly for both affected and non-affected agents. Agent versions are the same as well. Hardware/Software inventory appears to be completing on all systems.
Has anyone else seen this type of behavior and found a solution? Appreciate any advice. Thanks.
Edit: Most agents have been installed for close to 2 months.
Hardware inventory: Daily
Software inventory: Weekly

Hi,
Those two values are populated by the Heartbeat agent and if no user is logged on when the heartbeat is sent, then the value is blank so I would say this would be as expected.
If you want to know which user has been using a computer you should have a look at the assett Intelliengence reports with console usage, then you can see who has been using a computer most frequently.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012 R2 Reports not activate Value button and not showing Visio and Project products

Hello,
I have experiencing some problems with SCCM reports
1) In some of the reports the "Values" button is disabled and because of that I can not select the name of a specific computer, the reports I've noticed that are relating to Specific Computers
2) The other problem is that when reviewing a software inventory report on a specific computer, Visio nor the Project of Microsoft Office does not appear , which itself can be seen from the Resource Browser
I will appreciate it very much to help me to solve these drawbacks presented in the reports of SCCM 2012 R2.
Thanks in advance.
Manuel
Manuel´s Microsoft Forums Threads

open the report in the report builder tool (in the console, right click and edit. From the reports web page you can click the drop down and choose open with report builder) and examine the query that is being used to populate the computername
values list. You should be able to run that query from the report builder utility to see if anything is being returned. For the report you mention, there is no query to bring back computer names. In report builder, in the left hand menu, open the parameters
folder, then right click @variable from the list and open the properties. Go to the available values item in the menu of the properties window and notice that the available values is set to none, not get values from a query. That is why you can't click on
Values in the SSRS report and get a list of computer Names. You could add a query into the report and save the report if you really want a drop down list of all computer names. I would save the report with a different name if I were to take that approach,
it is not a good practice to modify the built in reports.
Regarding the applications you are not seeing, you will have to look at the query contained in the report, and determine if that query is targeting the same view or data that you were looking at using resource explorer. Which category within resource
explorer were you seeing the information you were expecting to see in this report? You can use report builder to see that the report you are looking at is calling a function to return the software titles, and that function looks to be based on the v_gs_softwareproduct
view. If you were looking at software files or add/remove programs within the resource viewer, you won't necessarily see the same information in the report, since the report is reading a different view.
I hope this info will help you to troubleshoot report quirks. SCCM 2012 reporting is a world apart from SCCM 2007 reporting. There are alot more stored procedures and functions used in SCCM 2012, and even a dll file on the reporting point that is required
for some (most) of the reports!

SCCM 2012 report on computers with local shares and share permissions

Very new to SCCM 2012, want to put together a report to show computers with local shares and the permissions on those shares (for security purposes, need to investigate any systems that have open shares_.
Managed to add and now collecting information that populates v_gs_share and I have a handle on the report itself, just wondering how to collect the share permissions - I've seen other qustions on the boards that are similar but reference earlier versions
of SCCM so wondering how to do it in 2012.
Thanks

So, where are you at? The script is running, and the clients have the data in their local WMI namespace, root\cimv2\sms_sharepermissions ?
So all that's left is to modify hardware inventory to pull that custom WMI Namespace in? If so, it's not too horrid. Take note of a workstation (or server) to which you have remote rights to; and which has run the script, so that on THAT specific
machine, root\cimv2\SMS_SharePermissions exists.
In your CM12 Console, Administration, Client Settings. Right-click "Default Client Settings", Properties. On the left, select "hardware inventory". then on the right, Set classes..., now the fun part.
Add...
Connect..., and put in ThatServerOrWorkstation (for computername), and wmi namespace is root\cimv2. Click the option "recursive", Connect. (the trick here is rights to the target).
From the results, it might be easiest to click on "classname" at the top for sorting, then go find SMS_SharePermissions. Select that, ok ok ok ok (however many times you need to agree); and... we're done here. Sit and wait for inventory to report
that data up. If you're paranoid, you can monitor dataldr.log; and force policy refreshes and hinv deltas on some boxes; but the key is patience. if you think you've waited long enough; you probably haven't. ;)
Standardize. Simplify. Automate.

MDT 2013 Keyboard and mouse not working

I am imaging some older model Acers (Veriton N281G) via USB bootable drive and MDT 2013. In this model in particular; the keyboard and mouse does not work once the Wizard box pops up. The BIOS does indeed recognize it and I'm able to select the
USB bootable drive, but unable to move the mouse or use the keyboard once the wizard appears. All other models including HP and Lenovo work without any issues.
I've tried different keyboards/mice including PS2 and 2 different KVM's. I have a separate folder in the Out-of-Box Drivers folder for this particular model and I've imported numerous usb drivers as well as taken them all out and tried without success.
I've tried LiteTouchPE_x64 and x86.
Any suggestions? Unfortunately, we have many of these Acers in our Exam rooms with Windows XP and I'm needing to upgrade them ASAP. If it were up to me, I would just replace them all...

Very weird, I can't tell if this is a PC problem or a driver issue, and if a driver issue, which driver. Which USB controller? which keyboard?
You don't mention which WinPE version you are using. I would move between the WAIK 3.1 and ADK 8.1 to see which one works/does not work.
Additionally, I would try booting directly from a Windows 7 or Windows 8.1 install disk (Make USB bootable, and copy the install *.iso contents to the drive).
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Image Capture and Samsung All-in-One SCX4825FN Preview Delay

I am trying to scan using a Samsung SCX4825FN all-in-one printer, scanner and fax machine. It is installed using an ethernet cable via my internal network. Two Macs see and scan with it without a problem. The third used to, but since I tried installing Samsung's own scan software (just to see if there were any OCR capability in it, which there wasn't), each time I try to open up the flatbed scanning, it takes hours (literally) to do the preview scan, and in the meantime, the computer is almost unusable. The printer (scanner) appears to correctly do the preview scan, then do a more detailed scan (at very high resolution?), which takes it ages, and it uses this to build the preview scan.
Other computers haven't changed, so I assume it is the since Mac that needs fixing. It also doesn't happen with the multi-sheet feeder scan on any of the computers, so it is only the flat-bed scan that causes the problem.
I have tried fixing permissions, removing the Samsung software completely (I then couldn't see the scanner at all) then reinstalling the minimal amount, deleting permissions for Image Capture and for the Samsung Scanning software, changing preferences within the Samsung software, but all to no avail. It still takes a couple of hours to complete the initial preview scan on the one computer but not the others. Has anyone got any other ideas?
I would like to delete the Samsung software off the problem Mac and then copy over the required drivers from another computer to let it scan without a problem using the standard Snow Leopard install, but I am not sure which files to copy over. I am worried that the (not very good) Samsung installation software is taking off more files than it is supposed to when I remove it, but I am not sure what it is supposed to leave on there, or perhaps it is leaving too much on there.
The nice installation software from Samsung forces a restart each time you try and do anything, as well as insisting that no other software is running while it is trying to make changes, so I am already a little unhappy about what kind of changes it is trying to make since most Apple software is not that crazy...

Interestingly here is what I received from Brother. (Note that scanning using the Control Center works fine.):
Dear Brother Customer,
Thank you for taking the time to write to us.
Is your machine able to scan using the Brother ControlCenter software?
If you are able to scan with the ControlCenter, the drivers are
installed and working properly.
Your issue is with Apple's Image Capture software and should be referred
to them for support.
When you open the Apple software, you will need to click DEVICES in the
Menu Bar, then select the disclosure triangle next to TWAIN devices to
reveal the Brother TWAIN device.
Select the Brother TWAIN and click OK.
You should now be able to scan with Apple's Image Capture application.
For any additional assistance with the Apple application, we suggest you
contact Apple for assistance.
We hope this information will be useful to you. If we can be of further
assistance, please let us know.
Best Regards,
MFC Macintosh Support
Brother International, USA
Email: [email protected]
So, who owns the problem: Brother or Apple? If I go to the Apple Store I see Canon and HP scannners for sale but not Brother. Maybe that is part of the problem. Corporate relations between Brother and Apple.

Forcing Domain OU selection in SCCM 2012 R2 UDI

We have added various domain OU to our UDI so that a newly imaged machine will join the correct OU during imaging. However, I can't figure out how to make OU selection required. When left as the default, it will select the top OU in the list. I've added
a blank line at the top with "Make a selection" as the "Friendly name". If someone does not select an OU (leaving it on "Make a selection") the computer will join the domain Computers OU.

Okay - I am on the same page as you now.
Create a OU (manually) like this:
Friendly Name: Please select an OU
DN: Sel=domain.com
And then create an validator using a regular expression (RegEx) using this
^(ou=) as the regular expression.
I have not tested this but it should work
Thanks for the info. However, either I didn't understand, or this may not work. Here is what I've done:
When I try to save the file I get the same error that I was getting in the screenshot of my previous reply:
The element 'Field' has invalid child element 'Default'. List of possible elements expected: 'Validator'.
As you can see above I tried putting in a default value, however, it also gives the same error when I leave the default value blank. Before adding this regex validator the default value was left blank, and I didn't receive this error. This error only occurs
when I try to add a validator and save the file.

MDT 2013 - Capture WIM vs. Domain Join in rules.ini

Hi,
Pre MDT2013 it was possible to have domain join settings in the rules.ini and run capture tasks.
rules.ini ->
JoinDomain=<my domain>
DomainAdmin=<domain join account>
DomainAdminDomain=<domain>
DomainAdminPassword=<password>
MachineObjectOU=OU=Computers Germany,OU=_Computers,OU=EU Offices,DC=bar,DC=foo,DC=com
On MDT2013, whenever I enable my domain join settings capture task will cancel shortly upon start.
Is this a desired behaviour?
How are you working aroun that?
Regards,
Albert

Albert,
My recommendation would be to create a second Deployment Share and use that only for Build & Capture Task Sequences.
I blogged about this a while ago, and I think it would work well for you (Build and Capture Task Sequence)
I recommend re-building your image you want to capture each time. This way you have a clean build with less patches on it (as the superseded patches will not be applied).
If you don't (or can't) do this, then you should try the following:
Assumptions
* Task sequence is named SYSPREPCAP
* I think from reading your previous posts that you don't want to join this to the domain, but you want all other TS's to join.
You'll want to try this in your CustomSettings.ini file.
[Settings]
Priority=TaskSequenceID, Default
[SYSPREPCAP]
JoinWorkgroup=WORKGROUP
[DEFAULT]
JoinDomain=<my domain>
DomainAdmin=<domain join account>
DomainAdminDomain=<domain>
DomainAdminPassword=<password>
MachineObjectOU=OU=Computers Germany,OU=_Computers,OU=EU Offices,DC=bar,DC=foo,DC=com

MDT 2013 capture error

Litetouch.wsf runs but after the sysprep reboot get error that can't connect to deploymentshare$ - but I have ip address and can map to share. Hope someone has seen this error before.

Could you post the exact error, please?
In the meantime;2 common things, check your credentials. Check your DNS.
Blog: http://scriptimus.wordpress.com

SCCM 2012 deployed application outside of Maint Window and before Deployment time

I have an application that I set for deployment time of 7pm today. The collection that I deployed it to had a maint window start time of 7pm - stop time of 6am.
Its 3:12 (MST) and 4:12 in my regional office, however they have all got the software installed.
Am I overlooking something, what did I do wrong? Is there a setting somewhere that I need to check?

I have time based on: UTC should I change that to Client Local Time? I thought UTC meant that for example if I have deployment set at 7pm and My sccm server is in a different time zone that when the respective time zone reached 7pm that it would start the
deployment.
I clicked on the maint Tab on the collection that I deployed it to and there is only 1 maint window for that collection.
I went to a client that it installed on and viewed the execmgr.log. The lasttime it was populated was today at 6am. I then tried another client and same thing last entry was from 6am.

SCCM 2012 R2 UDI Tasksequence (MDT 2013): Capture and Refresh UserState in one Tasksequence

Similar Messages

Maybe you are looking for