SCCM 2012 R2 Update not Downloading

Hi
i had install SCCM 2012 R2 and WSUS on the same server and i configure the software update point component .(End Point Protection) when I'm trying
to download software update, i click on All software updates repository right click and run synchronization i cant see any update.
wsyncmgr.log :
Thread terminated by service request. $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 14:41:50.922-330><thread=5384 (0x1508)>
SMS_EXECUTIVE started SMS_WSUS_SYNC_MANAGER as thread ID 5976 (0x1758). $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 14:46:27.078-330><thread=2736 (0xAB0)>
Log level 2 $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 14:46:27.309-330><thread=5976 (0x1758)>
Wakeup by SCF change $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 15:19:48.428-330><thread=5976 (0x1758)>
Please help

WCm log error
Remote configuration failed on WSUS Server.   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=BDC.mydomain.com SITE=NAV PID=2648 TID=5680 GMTDATE=Tue Jul 15 08:11:13.273 2014 ISTR0="BDC.mydomain.com" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=0   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)
Setting new configuration state to 3 (WSUS_CONFIG_FAILED)   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)
Waiting for changes for 49 minutes   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)

Similar Messages

SCCM 2012 - SUP - updates not showing as downloaded when they actualy are

Hello. I have a strange problem.
I have collected my updates by year to have an overview of what is still updates..
In the console I have 4 updates showing as not downloaded.
If I highlight these and choose to download I get this
So appearantly it works. However these continue to show as not downloaded. R
My WSUS installation uses a SQL database on a proper sql server.
Help needed

Nothing happened in the logfile. I have no clue to what is happening. What I ended up doing was that I recreated the Software Update Group with the exact same updates and downloaded it again. Problem solved. The views in the console are made from SQL
queries. Guess the download process just didnt finish its sql job.
Old log history is of course gone but I will post the logfile here if/when it happens again.

SCCM 2012 Software Updates not installing (bothh Windows patches & 3rd party updates)

Using SCCM 2012 R2, I am having a problem getting Windows updates to install. Applications published to people work, and basic software installations published to machines for a straight install work. However, both Windows patches and Adobe patches
fail to install on clients. I have imported the Adobe catalog into SCUP, and publish through WSUS. I can see the Adobe patches and Windows patches in SCCM, and can publish them. However, in deployment status out of 4 machines in my test group the Windows patches
installed on 1 and the other 3 are still in Unknown status with category of "Client check passed/Active". However, none of them are installing the patch - they don't even seem to try. All of those are Windows 7 PCs, incidentally. On Adobe patches,
one PC fails and the other 3 machines still sit in Unknown status. Certificates are distributed,
Any ideas what might cause the deployment to not push some targets, even when it's past the deadline?
Thanks,
Andy Maslin

An unknown status means that the clients are not reporting back to ConfigMgr correctly. This is often due to the WUA not pointing at the correct WSUS instance. You can verify this by examining the WUAHandler.log on one of those clients and it will clearly
indicate an issue with this which in turn is often due to a group policy overriding the ConfigMgr behavior.
Jason | http://blog.configmgrftw.com

SCCM 2012 R2 - Updates not installing

Hi all,
I have a SCCM 2012 R2 setup at a customer which has problems with distributing updates to the Windows 7 computers in the environment. The update group (with updates that are 100% sure required) is deployed to some test computers but the updates don't get
installed. It is also configured to be able to install the updates without looking at any maintenance windows. I see in the reporting that the updates are required, so in my opinion they should get installed.
I've checked the registry and the Windows Updates registry keys are pointing towards the right server (my SCCM primary site server). I've created a new software update group with fewer updates, same problem.
What I find in the UpdatesDeployment.log on one of the test machines is rather strange:
Assignment {8209BD9C-A86C-460B-99B3-CD6364F8BD1B} has total CI = 2
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
Assignment ({8209BD9C-A86C-460B-99B3-CD6364F8BD1B}) reconnected to the existing job ({779CA9E2-ABB8-43E1-B8AE-F4A94BA8C761}) successfully.
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
Assignment {c076f100-c2f7-43f9-a3f9-51fd33872b94} has total CI = 216
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
Assignment ({c076f100-c2f7-43f9-a3f9-51fd33872b94}) reconnected to the existing job ({A9758363-1871-4BD9-86D9-1BE0D82531AE}) successfully.
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
OnPolicyModify for assignment ({8209BD9C-A86C-460B-99B3-CD6364F8BD1B})...
UpdatesDeploymentAgent 29/09/2014 15:23:18
2740 (0x0AB4)
Work in progress for assignment {8209BD9C-A86C-460B-99B3-CD6364F8BD1B}, forced trigger (TriggerEnforce) will be attempted when done
UpdatesDeploymentAgent 29/09/2014 15:23:18
2740 (0x0AB4)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0
UpdatesDeploymentAgent 29/09/2014 15:30:32
4532 (0x11B4)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0
UpdatesDeploymentAgent 29/09/2014 15:30:32
4000 (0x0FA0)
Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>False</UseCachedResults></SoftwareUpdatesMessage>'
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Removing scan history to force non cached results
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Assignment({8209BD9C-A86C-460B-99B3-CD6364F8BD1B}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Assignment({c076f100-c2f7-43f9-a3f9-51fd33872b94}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Evaluation initiated for (0) assignments. UpdatesDeploymentAgent
29/09/2014 15:46:47 4836 (0x12E4)
Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>True</UseCachedResults></SoftwareUpdatesMessage>'
UpdatesDeploymentAgent 29/09/2014 17:06:31
6032 (0x1790)
Assignment({8209BD9C-A86C-460B-99B3-CD6364F8BD1B}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 17:06:31
6032 (0x1790)
Assignment({c076f100-c2f7-43f9-a3f9-51fd33872b94}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 17:06:31
6032 (0x1790)
Evaluation initiated for (0) assignments. UpdatesDeploymentAgent
29/09/2014 17:06:31 6032 (0x1790)
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT START Event
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Suspend activity in presentation mode is selected
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
At least one user has elected to suspend non-business hours activity when in presentation mode. Checking for presentation mode.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Proceeding to non-business hours activites as presentation mode is off.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Auto install during non-business hours is disabled or never set, selecting only scheduled updates.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
A user-defined service window(non-business hours) is available. We will attempt to install any scheduled updates.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Attempting to install 0 updates UpdatesDeploymentAgent
29/09/2014 22:00:00 3240 (0x0CA8)
No actionable updates for install task. No attempt required.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Updates could not be installed at this time. Waiting for the next maintenance window.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT END Event
UpdatesDeploymentAgent 30/09/2014 5:00:00
3132 (0x0C3C)
No current service window available to run updates assignment with time required = 1
UpdatesDeploymentAgent 30/09/2014 5:00:00
3132 (0x0C3C)
Attempting to cancel any job started at non-business hours.
UpdatesDeploymentAgent 30/09/2014 5:00:00
3132 (0x0C3C)
There are several updates found in the assignment (2 in the first, 216 in the second). Some of them are required but still the log says: No actionable updates.
The SERVICEWINDOWEVENT events originate from the business hours set in the client settings I suppose?
But I don't get why the log sais "No current service window available to run updates assignment with time required = 1"
Any advice?
Kind regards,
Bert

Hi,
What's the status in Software Center on clients?
Please check ScanAgent.log, WUAHandler.log, UpdatesHandler.log and Windowsupdate.log on the client to see if there is any helpful information.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Deploy SCCM 2012 Monthly updates (not with ADR), updates get expired

Hi,
I’m looking howto use monthly updates in SCCM 2012 R2. This post is showing howto with automatic deployment rules (ADR), but I’d need to do this without ADR.
http://www.windows-noob.com/forums/index.php?/topic/6799-using-system-center-2012-configuration-manager-part-9-deploying-monthly-updates/
What I do:
1.filter on updates I need
2.add them to an update group
3.distribute these updates as mandatory to our default windows 7 collection
Now everything works fine until some updates in the update group get expired. Then no updates are distributed anymore. Please advise.
J.
Jan Hoedt

Leave the expired updates and group the remaining updates (create software group fo these) and deploy to your clients.
Search the updates in sccm console: Add criteria: Expired NO
Have a look in this post (Software updates deployment without ADR)
http://www.windows-noob.com/forums/index.php?/topic/4467-using-sccm-2012-rc-in-a-lab-part-6-deploying-software-updates/
Thanks, Prabha G

SCCM 2012 software update point not sync with Microsoft Updat,

Hi
Recently my SCCM 2012 software update is not syncing with microsoft update, am getting below error. can any one suggest/help me how to resolve this issue.
WebException: The remote server returned an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetAuthConfig()
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.InternetGetServerAuthConfig(ServerSyncProxy proxy, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.Authenticate(AuthorizationManager authorizationManager, Boolean checkExpiration, ServerSyncProxy proxy, Cookie cookie, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesFromUSS()
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)

am just trying to tracert catalog.update.microsoft.com
from my wsus server but it is failed, would that be the reason/
Regards,
Madhan

SCCM 2012 SP1 update to R2

Hi!
SCCM 2012 SP1 update to R2.
I use SQL 2008R2 SP2 (10.50.4000.0), this version is Ok for SCCm 2012 R2 update?
cenubit

Yes it is.
See supported configurations
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigSQLDBconfig
Also, see procedure to upgrade from SP1 to R2
http://www.gerryhampsoncm.blogspot.ie/2013/10/in-place-upgrade-sccm-2012-sp1-to-r2.html
Also, note that CU1 for R2 has also been released. You should apply this afterwards.
http://support.microsoft.com/kb/2938441/en-us
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM 2012 Endpoint Protection initial update not downloaded

Hi,
I'm new to SCCM 2012. I recently started deploying the Endpoint Protection to all of clients (Windos 7 and XP Pro).
I've noticed that some clients have not been updating their initial definitions after the Endpoint Protection Software is installed.
Since they are not updating their detonation the client remains unprotected with the status icon in red.
The odd thing is that some of our computers do the initial update just fine while others are effected.
Also if I click update manually then the update goes through no issue, but with 100+ clients not updated its not something I want to do manually.
The clients are set to receive auto updates via a auto deployment rule.
Also the antimalware policy is set to do updates as well in this order:
Config Mgr
WSUS
Microsoft Malware Protection Center
Microsoft Update
Has anyone seen this before?
If I need to upload any specific logs just let me know.
Many Thanks

Do you have Software update configured (and working) thru ConfigMgr or using a standalone WSUS?
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

SCCM 2012 SP1 errors when downloading updates

Currently using SCCM 2012 SP1 with CU2 and I am having some update download issue with Automatic Deployment Rules.
The Environment is:
Server 2008 R2
SCCM 2012 SP1 CU2 (Upgraded from SCCM 2012 CU2)
I created an Automatic Deployment Rule for Adobe Flash. Since I was having the same issue with Adobe Reader, when I published via SCUP to WSUS I chose not to sign the updates.
After publishing to WSUS I then sync SCCM, I see the updates and then in the ADR I had it download the updates and I see this error:
Authentication of file C:\Windows\TEMP\CABDEC5.tmp failed, error 0x800b0004 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 3712 (0x0E80)
ERROR: DownloadContentFiles() failed with hr=0x80073633 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download the update from internet. Error = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download ContentID 16845337 for UpdateID 16841530. Error code = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Now the funny thing is if I go to the update itself within update group that Flash is a member I can right click it and choose download and the error doesn't occur.
I observed that the UNC path for ADR Adobe flash, when the rule is ran, is populated with folders that have a name something like 44738297895427890.1 or 423154325378u867234789.1. I have come to realize that those are failed downloads. So for the
heck of it I then right clicked the update itself and chose download and it downloaded without issue. Now I'm guessing that when I chose to download directly from the update maybe the system is getting the update from adobe and not from wherever the rule was
trying to get it from. I then see the .1 removed from the directory name and there are updates within them.
Just for clarity here are the steps I go through from SCUP to Syncing...
Log in to WSUS server
Run SCUP as administrator
Get notified there are updates from Adobe and let SCUP download updates
Find the updates the specify the following publishing options
Full Content
Sign all software updates with a new publishing certificate .... (Is this necessary by the way?)
Then click Next
After that's done I then go to SCCM Manager Console and go to Software Updates and right click to Synchronize them.
After that's done then I run the ADR for Adobe Flash and when it goes to download the updates that's when the error occurs.
What am I missing?
Also, while I wait for help I just recently added the WSUS SCUP certificate to the SCCM server to see if by chance that fixes stuff. If it does then I'll post the results of adding the certificate to the SCCM server.
One other thing, is there a way to delete updates? When I was having this issue in the past, I went in to SCUP I marked the updates as expired and then deleted the updates. Went to SCCM and synchronized the updates and they went from not expired to expired
then I waited, maybe 30 days or so before I could add the updates back in.
Thanks for the help!

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Have you seen the note at the bottom of this page about this error?
http://technet.microsoft.com/en-us/library/bb932193.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 SP1 Update to CU5 not showing version 1600 for clients updated !

Recently upgraded SCCM 2012 SP1 and its showing a version of 5.0.7804.1600 as it should be. Pushed out the CU 5 client manager update to few machines and they are also showing .1600 as the version, however in SCCM 2012 manager itself it is not updating the
status of those machines from say .1000 or .1400 to .1600. Why is this happening and any solution for it ? I have also updated the CM on the server hosting the SCCM and is current to .1600 version.

Because the client agent version is returned from clients via heartbeat discovery which only occurs by default every 7 days. Thus, you need to be patient. Note that I generally recommend reducing the heartbeat cycle to at least once a day partly for
this reason.
Jason | http://blog.configmgrftw.com | @jasonsandys

WSUS in Windows Server 2012 R2 is not downloading update files.

I'm not using Proxy server and this is the only WSUS server in our environment and update source is to sync from Microsoft Update site.
Synchronization completes successfully and every update files is not downloading. When I look at the download status from the main page, it said it downloaded, but when I look at the files from updates folder, it said failed to download.
I'm getting following error messages:
Content file download failed.
Reason: The server does not support the necessary HTTP protocol. Background Intelligent Transfer Service (BITS) requires that the server support the Range protocol header.
Source File: /c/msdownload/update/software/crup/2013/12/windows8.1-kb2903939-x64_a8ae5dc28899c892b46c9aa9c8aa71e2d3961a79.cab
Destination File: e:\wsus\WsusContent\79\A8AE5DC28899C892B46C9AA9C8AA71E2D3961A79.cab
John

Hi,
This is most likely a problem with a proxy server or firewall. Since you don’t have a proxy server, then firewall could be the culprit.
Error message when you try to download a file by using the Background Intelligent Transfer Service: "Content file download failed"
http://support.microsoft.com/kb/922330
Make sure your firewall support HTTP 1.1 range requests. If it still doesn’t help, try the following workaround:
If you are unable resolve this issue from the proxy/firewall side, then try these steps as a workaround on the WSUS server,
Set BitsDownloadPriorityForeground=1 using osql.exe on WSUS SQL instance.
net stop WSUSservice
CD "%ProgramFiles%\Update Services\tools\osql"
osql.exe -S <SQL instance name> -E -b -n -Q "USE SUSDB update tbConfigurationC set BitsDownloadPriorityForeground=1"
net start WSUSservice
Original post in this
blog.
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps.

SCCM 2012: Assigned updates to update group don't get there deployment

Hello,
Problem:
When I assign available updates to the update group the updates are not getting there deployment. Deployed: NO
(Previous months no problem)
Situation:
SCCM 2012 SP1
We made different Update groups. Example:
Windows 2008 R2
This group is deployed to different collections and has several deployments.
Steps taken:
Downloaded the new updates to Windows 2008 R2 Deployment Package (no errors)
Edit Membership and added updates to the Windows 2008 R2 update group (no errors)
When I check the update group I see the assigned updates in the group. The Downloaded Status is YES but the Deployed status is NO. When I check the update deploymensts it has no deployments.
Any idea where to find a solution for the problem? Which logs files to check?
Greetings

You could try and run this sql query to check the database directly and see if IsDeployed = 1 here. If that is the case there is just the console that is not updated. You'll need to change the Config Item ID (in red) to match the ID of your group, you'll
find this in the console. (Right click columns and add it)
select all upd.CI_ID,upd.LocaleID,upd.ApplicabilityCondition,upd.ArticleID,upd.BulletinID,upd.CI_ID,upd.CI_UniqueID,upd.CIType_ID,upd.CIVersion,upd.CreatedBy,upd.CustomSeverity,upd.CustomSeverityName,upd.DateCreated,upd.DateLastModified,upd.DatePosted,upd.DateRevised,upd.EffectiveDate,upd.EULAAccepted,upd.EULAExists,upd.EULASignoffDate,upd.EULASignoffUser,upd.IsUserCI,upd.InUse,upd.IsBroken,upd.IsBundle,upd.IsChild,upd.IsContentProvisioned,upd.IsDeployable,upd.IsDeployed,upd.IsEnabled,upd.IsExpired,upd.IsHidden,upd.IsLatest,upd.IsMetadataOnlyUpdate,upd.IsOfflineServiceable,upd.IsQuarantined,upd.IsSuperseded,upd.IsUserDefined,upd.LastModifiedBy,upd.LastStatusTime,upd.Description,upd.DisplayName,upd.CIInformativeURL,upd.LocaleID,upd.MaxExecutionTime,upd.ModelID,upd.ModelName,upd.NumMissing,upd.NumNotApplicable,upd.NumPresent,upd.NumTotal,upd.NumUnknown,upd.PercentCompliant,upd.PermittedUses,upd.PlatformType,upd.RequiresExclusiveHandling,upd.RevisionNumber,upd.SDMPackageVersion,upd.SedoObjectVersion,upd.Severity,upd.SeverityName,upd.SourceSite
from fn_ListUpdateCIs(1033) as upd,vSMS_CIRelation as cr where ((cr.FromCIID =
16822104
AND cr.RelationType = 1) AND upd.CI_ID = cr.ToCIID)

MDT 2013 & SCCM 2012 R2 - Slow MDT Download

MDT Use toolkit package inside of OSD takes a very long time to download.<br>
MDT is only around 40mb total size, so i can't understand why it's taking so long on only this section.
Typically the use toolkit package where MDT downloads locally inside of OSD takes around 5-7 minutes, each of the files are small in size but the download time is ridiculous! I transfer a 6bg .wim file in 2 minutes when it comes to applying the image so
i know the network speed is ok, something is going wrong with the MDT package and downloading it.
Running a normal TS without MDT runs fine, and the image installs ok.
Pulling my hair out with how long MDT takes, it's adding on an extra 15-20 minutes onto my sequence just by downloading toolkit files!
Anyone had similar or know what I may be able to try?
The setup is a lab environment. I have a standalone primary, with local SQL, 1 DP & 3 physical clients.

I too have seen significant slowness downloading the MDT 2013 Toolkit package since upgrading my DEV environment (physical server and clients) to SCCM 2012 R2. It takes almost 20 minutes
to download the package.
Watching SMSTS.LOG I can see that it taking about 2 second to download each file in the package. 617 files multiplied by 2 seconds comes out to right around 20 minutes.
Last night I installed the most recent hotfix (KB2910552) but I just confirmed that it did not improve the speed of the MDT toolkit package download.
I’m planning on opening a case with MS support today.
I'll report back with my findings.
Any update here? Can I ask if anyone is seeing the issue when using HTTPS?
@mgouldthorp1 - Have you raised a case yet and if so any updates?
Thanks.

SCCM 2012 Win Updates - send only Metadata to Clients?

Hi Community!
Is it possible to configure SCCM 2012, so that Clients (Branch Offices) will receive only Metadata from our Server and will download the content directly from the Internet? And if, yes....can you tell us how?
We had this configuration before (without SCCM) with 2 WSUS Servers (one with Database and one with only Metadata) and both centrally Managed.
This was a perfect Solution for us. Now Management want to do this with only 1 SCCM Server (WSUS installed on SCCM Server).
Best Regards
Marcus

This can be done with ConfigMgr 2012 SP1 (not RTM). I'm not sure why you would want a LAN client to download content from Microsoft Update rather than their local Distribution Point, but you can do it per software update Deployment with the Download
Settings option:
"If software updates are not available on preferred distribution point or remote distribution point, download content from Microsoft Update"
When you make your deployment, don't distribute the content for the Deployment Package to any DP's, and then your clients should download it from the internet.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
<-- If this post was helpful, please click "Vote as Helpful".

SCCM 2012 Software updates

Hi All,
We have SCCM 2012 R2 Server, We have been using more than a years ,
Now im facing crazy issues .
1.every month we using sccm server for deploying windows patches .
2.before patching we set maintenance schedules for device group.
3.patch deployment is working fine without any issues and we get the success 100 % compliants report in all the server .
Note:- but after one or two months later in Monitoring-->deployment tab-->its showing only few machines success results or deploying again old package''
this process is keep on rotating in all the deployment .
how to resolve this issues.
Regards,
Velu M

Hi,
You could try to initiate Software Updates Deployment Evaluation Cycle action from a problematic client, then check CIAgent.log, StateMessage.log to see if there are any helpful information.
Reference:
SCCM state messaging–in depth:http://blogs.msdn.com/b/steverac/archive/2011/01/07/sccm-state-messaging-in-depth.aspx
You could also follow the steps in the blog below to check state messages in WMI.
Software Update Compliance Reports – Detection State Unknown
http://blogs.technet.com/b/configmgrdogs/archive/2013/11/07/software-update-status-reports-detection-state-unknown.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 R2 Update not Downloading

Similar Messages

Maybe you are looking for